Готові списки джерел за темами / RSM modelling

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "RSM modelling"

Автор: Grafiati

Опубліковано: 25 січня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "RSM modelling".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "RSM modelling"

Nwosu-Obieogu, Kenechi, Maureen A. Allen, Chukwunonso Nwogu, Bertrand Nwankwojike, Simeon Bright, and Christian Goodnews. "Modelling and optimization of luffa oil transesterification via acid activated waste marble catalyst." Journal of the Ghana Institution of Engineering (JGhIE) 24, no. 1 (2024): 58–71. http://dx.doi.org/10.56049/jghie.v24i1.140.

Повний текст джерела

Анотація:

This study assessed the performance of response surface methodology (RSM) and artificial neural network (ANN) in modelling the transesterification of luffa oil using acid activated waste marble catalyst. The waste marble was activated with 0.5 molar sulphuric acid at 600 oC for 4 hours and was characterized by SEM, FT-IR, XRD, XRF, and BET; the characterization proved that the catalyst was successfully activated. The experiments were conducted at a catalyst dosage (1-5 wt. %), temperature (40-80 oC), methanol-oil ratio (4:1-12:1), time (1-3 hours), and agitation speed of (100- 500 rpm) with ou

Стилі APA, Harvard, Vancouver, ISO та ін.

Nair, Abhilash T., Abhipsa R. Makwana, and M. Mansoor Ahammed. "The use of response surface methodology for modelling and analysis of water and wastewater treatment processes: a review." Water Science and Technology 69, no. 3 (2013): 464–78. http://dx.doi.org/10.2166/wst.2013.733.

Повний текст джерела

Анотація:

In recent years, response surface methodology (RSM) has been used for modelling and optimising a variety of water and wastewater treatment processes. RSM is a collection of mathematical and statistical techniques for building models, evaluating the effects of several variables, and obtaining the values of process variables that produce desirable values of the response. This paper reviews the recent information on the use of RSM in different water and wastewater treatment processes. The theoretical principles and steps for its application are first described. The recent investigations on its ap

Стилі APA, Harvard, Vancouver, ISO та ін.

Irfan, Muhammad, Sharjeel Waqas, Ushtar Arshad, et al. "Response Surface Methodology and Artificial Neural Network Modelling of Membrane Rotating Biological Contactors for Wastewater Treatment." Materials 15, no. 5 (2022): 1932. http://dx.doi.org/10.3390/ma15051932.

Повний текст джерела

Анотація:

Membrane fouling is a major hindrance to widespread wastewater treatment applications. This study optimizes operating parameters in membrane rotating biological contactors (MRBC) for maximized membrane fouling through Response Surface Methodology (RSM) and an Artificial Neural Network (ANN). MRBC is an integrated system, embracing membrane filtration and conventional rotating biological contactor in one individual bioreactor. The filtration performance was optimized by exploiting the three parameters of disk rotational speed, membrane-to-disk gap, and organic loading rate. The results showed t

Стилі APA, Harvard, Vancouver, ISO та ін.

Daramola, M. O., K. J. Keesman, and F. Spenkelink. "Process Modelling of Ultrafiltration Units: An RSM Approach." Journal of Applied Sciences 7, no. 23 (2007): 3687–95. http://dx.doi.org/10.3923/jas.2007.3687.3695.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Narasimman, Pasupathi, K. Ravi, and Sandra Pinelas. "Modelling the Additive Functional Equations through RSM Matrices." JOURNAL OF ADVANCES IN MATHEMATICS 12, no. 10 (2016): 6714–19. http://dx.doi.org/10.24297/jam.v12i10.117.

Повний текст джерела

Анотація:

This paper suggests one possible method to model additive type of functional equations using eigenvalues and eigenvectors of matrices with suitable numerical examples. The authors have defined a new type of Row Sum Matrix(RSM) and have discussed its eigenvalues and eigenvectors in order to model functional equations. The famous additive cauchy functional equation and Logical functional equation have also been modelled using identity matrix and Logical matrix in this study.

Стилі APA, Harvard, Vancouver, ISO та ін.

Eser, Aykut, Elmas Aşkar Ayyıldız, Mustafa Ayyıldız, and Fuat Kara. "Artificial Intelligence-Based Surface Roughness Estimation Modelling for Milling of AA6061 Alloy." Advances in Materials Science and Engineering 2021 (February 12, 2021): 1–10. http://dx.doi.org/10.1155/2021/5576600.

Повний текст джерела

Анотація:

This study introduces the improvement of mathematical and predictive models of surface roughness parameter (Ra) in milling AA6061 alloy using carbide cutting tools coated with CVD-TiCN in dry condition. An experimental model has been improved for estimating the surface roughness using artificial neural networks (ANN) and response surface methodology (RSM). For these models, cutting speed, depth of cut, and feed rate were evaluated as input parameters for experimental design. For the ANN modelling, the standard backpropagation algorithm was established to be the optimum selection for training t

Стилі APA, Harvard, Vancouver, ISO та ін.

Owolabi, Rasheed, Mohammed Usman, Adefunmilayo Anuoluwapo, and Onyekachi Oguamanam. "Modelling, Optimization and Green Metrics Evaluation of Bio-Catalytic Synthesis of Biodiesel." Tikrit Journal of Engineering Sciences 27, no. 3 (2020): 17–30. http://dx.doi.org/10.25130/tjes.27.3.03.

Повний текст джерела

Анотація:

The response surface methodology (RSM) was adopted in ths study to evaluate the influence, interplay and interaction of various process variables on the biodiesel yield using methanol and castor oil as feedstocks in the presence of bovine bones as bio-catalyst.Twenty experimental runs were designed using central composite design (CCD). RSM statistical model of second order was developed. Analysis of variance (ANOVA) tests were performed on the model to find the relative influence of the process variables. An optimum yield of 95.12% was obtained at 60 0C reaction temperature, 120 minutes reacti

Стилі APA, Harvard, Vancouver, ISO та ін.

Hudák, Peter, and Valéria Hrabovcová. "Mathematical Modelling and Parameter Determination of Reluctance Synchronous Motor with Squirrel Cage." Journal of Electrical Engineering 61, no. 6 (2010): 357–64. http://dx.doi.org/10.2478/v10187-010-0055-y.

Повний текст джерела

Анотація:

Mathematical Modelling and Parameter Determination of Reluctance Synchronous Motor with Squirrel Cage The paper provides an analysis of reluctance synchronous motor (RSM) with asymmetrical rotor cage. Its performances during its starting up is investigated. A mathematical model is created on the basis of detailed investigation of model parameters. The RSM starting up by switching it directly across the line was simulated and verified by measurements.

Стилі APA, Harvard, Vancouver, ISO та ін.

Gadallah, Mohamed H. "Process re-modelling using RSM and the splitting approach." International Journal of Mechatronics and Manufacturing Systems 3, no. 1/2 (2010): 58. http://dx.doi.org/10.1504/ijmms.2010.029875.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dullah, Salinah, Hidayati Asrah, Movierawanna Bernard, and Jane Ann Jumi. "Preliminary Modelling of Hydrological Performance for Green Roof Drainage Layer using Response Surface Methodology." Journal of Advanced Research in Applied Sciences and Engineering Technology 55, no. 1 (2024): 105–24. https://doi.org/10.37934/araset.55.1.105124.

Повний текст джерела

Анотація:

Response Surface Methodology modelling is used in this study to investigate experimental result for waterproofing and drainage layers with slope ranging from 0% to 6% test beds with three types layers of drainage, rubber crumbs, oil palm shells and polyform. The aim of this study is to determine the accuracy and effectiveness of RSM through investigating the hydrological performance of green roofs. Nine sets of experimental data were used to analyse, and the input parameters include type of material drainage layer, slopes, and water absorption of the materials. The output variables were hydrog

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "RSM modelling"

Abd, Rahman M. N. "Modelling of physical vapour deposition (PVD) process on cutting tool using response surface methodology (RSM)." Thesis, Coventry University, 2009. http://curve.coventry.ac.uk/open/items/cca436cf-b72b-c899-ef02-bd522b0d7ec5/1.

Повний текст джерела

Анотація:

The Physical Vapour Deposition (PVD) magnetron sputtering process is one of the widely used techniques for depositing thin film coatings on substrates for various applications such as integrated circuit fabrication, decorative coatings, and hard coatings for tooling. In the area of coatings on cutting tools, tool life can be improved drastically with the application of hard coatings. Application of coatings on cutting tools for various machining techniques, such as continuous and interrupted cutting, requires different coating characteristics, these being highly dependent on the process parame

Стилі APA, Harvard, Vancouver, ISO та ін.

Mpongwana, Ncumisa. "Metabolic network modelling of nitrification and denitrification under cyanogenic conditions." Thesis, Cape Peninsula University of Technology, 2019. http://hdl.handle.net/20.500.11838/2982.

Повний текст джерела

Анотація:

Thesis (PhD (Chemical Engineering))--Cape Peninsula University of Technology, 2019 Simultaneous nitrification and aerobic denitrification (SNaD) is a preferred method for single stage total nitrogen (TN) removal, which was recently proposed to improve wastewater treatment plant design. However, SNaD processes are prone to inhibition by toxicant loading with free cyanide (CN-) possessing the highest inhibitory effect on such processes, rendering these processes ineffective. Despite the best efforts of regulators to limit toxicant disposal into municipal wastewater sewage systems (MWSSs), fre

Стилі APA, Harvard, Vancouver, ISO та ін.

Gao, Chan. "Devenir des substances per et poly-fluoroalkylées (PFAS) dans les estuaires : focus sur les interactions avec les sédiments en suspension." Electronic Thesis or Diss., Bordeaux, 2024. http://www.theses.fr/2024BORD0409.

Повний текст джерела

Анотація:

Les substances per et poly-fluoroalkylées (PFAS) constituent un vaste groupe hétérogène de micropolluants émergents. Du fait de leur structure physico-chimique très stable, les PFAS sont persistantes et largement répandues dans l'environnement et posent de nombreux problèmes environnementaux. Ces dernières années, le devenir des PFAS a fait l'objet d'une attention croissante. Dans le cycle des PFAS, l'air, l'eau, le sol et les sédiments sont différents compartiments impliqués. À l'exutoire des grands bassins versants et à l’interface terre-mer, les estuaires sont considérés comme la principale

Стилі APA, Harvard, Vancouver, ISO та ін.

Jia, Xisheng. "OR modelling within the RCM context." Thesis, University of Salford, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.366325.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lindberg, Leif. "Modellering av A-ram." Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-8066.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mendonça, Danilo Filgueira. "Dependability verification for contextual/runtime goal modelling." reponame:Repositório Institucional da UnB, 2015. http://dx.doi.org/10.26512/2015.02.D.18158.

Повний текст джерела

Анотація:

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Exatas, Departamento de Ciência da Computação, 2015. Submitted by Ana Cristina Barbosa da Silva (annabds@hotmail.com) on 2015-04-27T15:56:38Z No. of bitstreams: 1 2015_DaniloFilgueiraMendonça.pdf: 15442097 bytes, checksum: 3fd8f92515216f0962560e658342894f (MD5) Approved for entry into archive by Raquel Viana(raquelviana@bce.unb.br) on 2015-05-14T19:16:39Z (GMT) No. of bitstreams: 1 2015_DaniloFilgueiraMendonça.pdf: 15442097 bytes, checksum: 3fd8f92515216f0962560e658342894f (MD5) Made available in DSpace on 2015-

Стилі APA, Harvard, Vancouver, ISO та ін.

Du, Zhaodong. "Numerical Modelling for Design of Ram-compacted Bearing Base Piling Foundations." Thesis, Curtin University, 2020. http://hdl.handle.net/20.500.11937/83426.

Повний текст джерела

Анотація:

This thesis presents a novel design method for RBB piles based on validated numerical modelling in ABAQUS. Two developed equations provided integrate five typical RBB piling parameters, involving a wide range of hypothetical cases of various RBB piling configurations, covering all actual soil types. The equations were calibrated with four historic cases; these have confirmed that the new predictions were economic and accurate, and the underestimation caused by the currently used design equations was eliminated.

Стилі APA, Harvard, Vancouver, ISO та ін.

Bek, Jeremy. "Design, simulation, and testing of an electric propulsion cluster frame." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-300970.

Повний текст джерела

Анотація:

In general, electric propulsion oﬀers very high eﬃciency but relatively low thrust. To remedy this, several ion engines can be assembled in a clustered conﬁguration and operated in parallel. This requires the careful design of a frame to accommodate the individual propulsion systems. This frame must be modular to be used in diﬀerent cluster sizes, and verify thermal and mechanical requirements to ensure the nominal operation of the thrusters. The present report aims to show the design process of such a frame, from preliminary modelling to the experimental study of a prototype. This document fe

Стилі APA, Harvard, Vancouver, ISO та ін.

Alzaabi, Mohamed Abdulla Hasan Saif. "New cryptanalysis and modelling for wireless networking." Thesis, University of Hertfordshire, 2015. http://hdl.handle.net/2299/17115.

Повний текст джерела

Анотація:

High data rates and interoperability of vender devices have made WiMAX a prime desire for use worldwide. WiMAX is based on the IEEE 802.16 standard. IEEE 802.16a, b, c & d versions were updated within three years of the first launch of WiMAX. However, during those early years reports were published that highlighted the security weaknesses of the standard. These weaknesses prompted the IEEE to issue a new version, 802.16e to tackle the security issues. Despite this security enhancement, WiMAX remains vulnerable. This research project looks at the vulnerability of WiMAX 802.16e Subscriber Statio

Стилі APA, Harvard, Vancouver, ISO та ін.

Ridgeway, Julia B. "An analysis of changes in stream temperature due to forest harvest practices using DHSVM-RBM." DigitalCommons@CalPoly, 2019. https://digitalcommons.calpoly.edu/theses/2093.

Повний текст джерела

Анотація:

Forest harvesting has been shown to cause various changes in water quantity and water quality parameters, highlighting the need for comprehensive forest practice rules. Studies show a myriad of impacts to ecosystems as a result of watershed level changes, such as forest harvesting. Being able to better understand the impact that forest harvesting can have on stream temperature is especially critical in locations where federally threatened or endangered fish species are located. The overall goal of this research project is to assess responses in stream temperature to various riparian and forest

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "RSM modelling"

John, Fitzgerald. Modelling systems: Practical tools and techniques in software development. Cambridge University Press, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

John, Fitzgerald. Modelling systems: Practical tools and techniques in software development. Cambridge University Press, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Pacific-Rim International Conference: Modelling, Simulation and Identification. (1992 Vancouver, Canada). Proceedings of the Pacific-Rim International Conference, Modelling, Simulation and Identification: Vancouver, Canada, August 4-6, 1992. Edited by Hamza M. H and International Association of Science and Technology for Development. Acta Press, 1992.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

F, Raes, and Workshop on Real Time Radioactivity Monitoring, (2nd : 1989 : Ispra), eds. Real time radioactivity monitoring and its interface with predictive atmospheric transport modelling: Proceedings of the 2nd REM Workshop,Ispra, 5-6 December 1989. Commission of the European Communities, 1991.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Maus, Helge. Cinema 4D 13: Das umfassende Training ; über 20 Stunden Praxisschulung-3D-Modelling, Animation, Licht, Rendering und BodyPaint 3D ; DVD-ROM für Windows und Mac. Galileo Press, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Schneider, Jörg, and Ton Vrouwenvelder. Introduction to safety and reliability of structures. 3rd ed. International Association for Bridge and Structural Engineering (IABSE), 1997. http://dx.doi.org/10.2749/sed005.

Повний текст джерела

Анотація:

Society expects that buildings and other structures are safe for the people who use them or who are near them. The failure of a building or structure is expected to be an extremely rare event. Thus, society implicitly relies on the expertise of the professionals involved in the planning, design, construction, operation and maintenance of the structures it uses.Structural engineers devote all their effort to meeting society’s expectations effi ciently. Engineers and scientists work together to develop solutions to structural problems. Given that nothing is absolutely and etern

Стилі APA, Harvard, Vancouver, ISO та ін.

CODEE (Consortium for ODE Experiments). ODE Architect CD ROM Version 1.5. Wiley, 2001.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chemical Modelling Spr Chemical Modelling Rsc. Royal Society of Chemistry, 2006.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chemical Modelling Spr Chemical Modelling Rsc. Royal Society of Chemistry, 2004.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Modelling Systems. Cambridge University Press, 2009.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "RSM modelling"

Khoshraftar, Zohreh, Fatemeh Bahmanzadegan, and Ahad Ghaemi. "RSM and ANN Modelling of CO2 Adsorbents." In CO2 Adsorbents. CRC Press, 2025. https://doi.org/10.1201/9781003476191-10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

José, R. San, J. L. Pérez, I. Salas, et al. "Air Quality Simulations over Europe Using the CAMx-RSM-MM5 System: Sensitivity to Meteorology and Initial Concentrations." In Air Pollution Modelling and Simulation. Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-662-04956-3_38.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Calgan, Haris, José Manuel Andrade, and Metin Demirtas. "RSM-Based Optimization of Excitation Capacitance and Speed for a Self-Excited Induction Generator." In Mathematical Modelling and Optimization of Engineering Problems. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-37062-6_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mondal, Nripen, Sudip Mandal, Madhab Chandra Mandal, Santanu Das, and Barun Haldar. "ANN-FPA Based Modelling and Optimization of Drilling Burrs Using RSM and GA." In Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-90532-3_15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Razak, Abdul, Akshay Hiremath, N. Sreenivasalu Reddy, et al. "Augmentation of Heat Transfer Over Dimple Surface in Forced Convection—An RSM and ANN Modelling Approach." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-2382-3_51.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Valarmathi, T. N., K. Palanikumar, S. Sekar, and B. Latha. "ANFIS and RSM Modelling Analysis on Surface Roughness of PB Composites in Drilling with HSS Drills." In Materials Forming, Machining and Tribology. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70009-6_8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Palanisamy, A., V. Sivabharathi, S. Sivasankaran, and S. Navaneethakrishnan. "Experimental Investigation and Optimization of EDM Process Parameters on Ti-6Al-4V Alloy Using Taguchi-Based GRA and Modelling by RSM." In Green Materials and Advanced Manufacturing Technology. CRC Press, 2020. http://dx.doi.org/10.1201/9781003056546-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chandra, Vaibhav, Andriya Narasimhulu, Sudarsan Ghosh, and P. Venkateswara Rao. "Multi-objective Optimization and Modelling of AISI D2 Steel Using Grey Relational Analysis and RSM Approaches Under Nano-based MQL Hard Turning." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4320-7_88.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Abdulkadir, Isyaka, Bashar S. Mohammed, M. S. Liew, and M. M. A. Wahab. "Effect of Graphene Oxide and Crumb Rubber on the Drying Shrinkage Behavior of Engineered Cementitious Composite (ECC): Experimental Study, RSM—Based Modelling and Optimization." In Lecture Notes in Civil Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5041-3_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Antunes, José, Ferran Brosa Planella, Arnau Dòria-Cerezo, et al. "Human Towers or Castells Modelling." In RSME Springer Series. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-32130-6_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "RSM modelling"

Khalaf, Orwa Alward Zaidan, Noor Zainab Habib, Yasemin Nielsen, Ashraf J. M. Al Ashram, and Nura Shehu Aliyu Yaro. "Fly Ash as Sustainable Modifier, Using RSM as Modelling and Optimization Tool." In 2024 International Conference on Sustainable Technology and Engineering (i-COSTE). IEEE, 2024. https://doi.org/10.1109/i-coste63786.2024.11025090.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sharif, Noor Fadzilah Mohamed, Nur Arisya Samsudin Seri, Siti Nooraya Mohd Tawil, et al. "Response Surface Modelling of Titania Photoanode Dye Sensitized Solar Cell (DSSC) Using Central Composite Design." In International Conference on X-Rays and Related Techniques in Research and Industry 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-8noszl.

Повний текст джерела

Анотація:

The purpose of this work is to enhance the performance of photoanode element in Dye-Sensitised Solar Cells (DSSC) by using a Response Surface Methodology (RSM) technique. Most of previous work related to photoanode enhancement have relied on the traditional method known as One Factor at a Time (OFAT), which has the limitation to evaluate the interaction effect for TiO2 Thickness and dye molarity. To address this issue, RSM is used to model and optimize the performance of DSSC parameters by studying the relationship between two parameters namely TiO2 film thickness and the concentration of N719

Стилі APA, Harvard, Vancouver, ISO та ін.

Hasan, Mohammad Mainul, Tanveer Saleh, and Ali Sophian. "Modelling of Machining Time and its Uncertainty in Micro Electrical Discharge Machining Process Using RSM." In 2024 9th International Conference on Mechatronics Engineering (ICOM). IEEE, 2024. http://dx.doi.org/10.1109/icom61675.2024.10652357.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mishra, Rakesh Chandra, Surajbhan, Aditya Viz, and Girish Dutt Gautam. "Sustainable Modelling and Optimization of Aluminium Sand-Casting Process Parameters Using RSM, ANN and Fuzzy Logic." In 2024 1st International Conference on Sustainability and Technological Advancements in Engineering Domain (SUSTAINED). IEEE, 2024. https://doi.org/10.1109/sustained63638.2024.11073854.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Espinoza, Renzo Fabián, and Paulo Godoy. "OpenDSS-Based Real-Time RMS Simulator: Design and Applications." In 2024 Open Source Modelling and Simulation of Energy Systems (OSMSES). IEEE, 2024. http://dx.doi.org/10.1109/osmses62085.2024.10668999.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kostromin, Oleh, Felix Kossak, and Michael Zwick. "RAM: Retrieval Augmented Modelling for Tabular In-Context Few-Shot Domain Adaptation." In ESANN 2025. Ciaco - i6doc.com, 2025. https://doi.org/10.14428/esann/2025.es2025-15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Mohiuddin, A. K. M., Nabeel Adeyemi, and Ahmad Tariq Jameel. "Numerical Modelling of Mixed Flow Impeller in Stirred Vessel." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-89368.

Повний текст джерела

Анотація:

Flow characteristics of a single mixed flow impeller in baffled and unbaffled vessel have been experimentally and numerically investigated at 600 rpm. The mean, radial and axial velocity components obtained using particle image velocimetry (PIV) were compared with three turbulence models (κ-ε, κ-ε shear stress transport (sst) and Reynold’s stress model (RSM)) based on the Reynold’s averaging Navier-Stokes equation at two planes, above (x/R = 0.46) and below (x/R = 0.38) the impeller. Numerical results of mean and axial velocity for the RSM turbulence model compared better to PIV below the impe

Стилі APA, Harvard, Vancouver, ISO та ін.

Zaidon, N., A. N. Nordin, and A. F. Ismail. "Modelling of microfluidics network using electric circuits." In 2015 IEEE Regional Symposium on Micro and Nanoelectronics (RSM). IEEE, 2015. http://dx.doi.org/10.1109/rsm.2015.7354954.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Samuel, Olusegun D., Venkateshwar R. Pathapalli, and Christopher C. Enweremadu. "Optimizing and Modelling Performance Parameters of IC Engine Fueled With Palm-Castor Biodiesel and Diesel Blends Combination Using RSM, ANN, MOORA and WASPAS Technique." In ASME 2022 16th International Conference on Energy Sustainability collocated with the ASME 2022 Heat Transfer Summer Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/es2022-81146.

Повний текст джерела

Анотація:

Abstract Biodiesel fuel properties and engine characteristics can be improved by using hybrid biodiesel and robust optimization tools. This study predicts the performance parameters of diesel engines fueled with castor-palm kernel biodiesel (CPKB) and diesel fuel blend using response surface methodology (RSM) and artificial neural network (ANN). Optimization of the performance parameters was also carried out using multi-criteria decision-making methods (WASPA S and MOORA) for the first time. The RSM and ANN were employed in predicting the performance parameters such as CPKB fuel blends (FB) (0

Стилі APA, Harvard, Vancouver, ISO та ін.

Jamil, Nadira, Anis Nurashikin Nordin, and Ioana Voiculescu. "Design and modelling of an impedance-based MEMS biosensor." In 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM). IEEE, 2011. http://dx.doi.org/10.1109/rsm.2011.6088352.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "RSM modelling"

Chen, Xiao, Jaisree Iyer, and Susan Carroll. Dynamic reduced order modelling (ROM) of chemical and mechanical processes in CO₂-cement systems. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1476178.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Padget, C. D. W., D. R. M. Pattison, D. P. Moynihan, and O. Beyssac. Pyrite and pyrrhotite in a prograde metamorphic sequence, Hyland River region, SE Yukon: implications for orogenic gold. Natural Resources Canada/CMSS/Information Management, 2021. http://dx.doi.org/10.4095/328987.

Повний текст джерела

Анотація:

The distribution of pyrite and pyrrhotite is documented within an andalusite-sillimanite type (high-temperature, low-pressure) metasedimentary succession exposed in the Hyland River region of southeastern Yukon, Canada. The following metamorphic zones are recognized: chlorite, biotite, cordierite/staurolite (porphyroblast-in), andalusite, sillimanite, and K-feldspar + sillimanite. Pyrite occurs in the chlorite zone through the biotite zone, while pyrrhotite occurs from the chlorite zone to K-feldspar + sillimanite zone. The pyrite-pyrrhotite transition, therefore, occupies an interval in the c

Стилі APA, Harvard, Vancouver, ISO та ін.

Yu, Y. S. Capabilities, limitations and the use of the GEOROC computer package. Natural Resources Canada/CMSS/Information Management, 1987. http://dx.doi.org/10.4095/325534.

Повний текст джерела

Анотація:

Computer codes have been used by various researchers in modelling viscoelastic formations, with a good degree of success. Serata used a complex rheological model, REM (Rheological Element Model) code, to simulate mine openings [2]. Others, in the U.S. Nuclear Waste Isolation Programme, have evaluated the capability of various codes for the design of nuclear waste repository [3]. Because of the proprietary nature of the above codes, they are not available to mine operators in Canada. Consequently, in 1984, CANMET initiated a research project to develop a numerical modelling package for use in t

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!