Увійти

Готові списки джерел за темами / Self-healing mechanisms

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Self-healing mechanisms"

Автор: Grafiati

Опубліковано: 7 червня 2025

Оновлено: 2 серпня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Self-healing mechanisms".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Self-healing mechanisms"

1

Kowalewska, Anna, and Kamila Majewska-Smolarek. "Self-Healing Antimicrobial Silicones—Mechanisms and Applications." Polymers 15, no. 19 (2023): 3945. http://dx.doi.org/10.3390/polym15193945.

Повний текст джерела

Анотація:

Organosilicon polymers (silicones) are an important part of material chemistry and a well-established commercial product segment with a wide range of applications. Silicones are of enduring interest due to their unique properties and utility. Recently, new application areas for silicone-based materials have emerged, such as stretchable electronics, wearable stress sensors, smart coatings, and soft robotics. For this reason, research interest over the past decade has been directed towards new methods of crosslinking and increasing the mechanical strength of polyorganosiloxanes. The introduction

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Srivastava, Ashish, P. Usha, Sharif Fadhil Abood Al-Alawachi, Lavish Kansal, Aravinda K, and Deepika Arora. "Self-Healing Materials: Mechanisms, Characterization, and Applications: A detailed Review." E3S Web of Conferences 505 (2024): 01019. http://dx.doi.org/10.1051/e3sconf/202450501019.

Повний текст джерела

Анотація:

There is a category of materials known as self-healing materials, which are distinguished by their inherent capacity to mend themselves in the event of internal damage or fractures. Because it possesses a built-in healing mechanism, it possesses this one-of-a-kind power. This system can react to injury in methods that range encompassing chemical reactions, physical alterations, and biological processes. The need to extend the endurance and longevity of materials used in a variety of industries, such as building, transportation, and electronics, has been a driving force behind the creation of s

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Jiang, Yixue, Evelyn Ling Ling Ng, Danielle Xinyun Han, et al. "Self-Healing Polymeric Materials and Composites for Additive Manufacturing." Polymers 15, no. 21 (2023): 4206. http://dx.doi.org/10.3390/polym15214206.

Повний текст джерела

Анотація:

Self-healing polymers have received widespread attention due to their ability to repair damage autonomously and increase material stability, reliability, and economy. However, the processability of self-healing materials has yet to be studied, limiting the application of rich self-healing mechanisms. Additive manufacturing effectively improves the shortcomings of conventional processing while increasing production speed, accuracy, and complexity, offering great promise for self-healing polymer applications. This article summarizes the current self-healing mechanisms of self-healing polymers an

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Almutairi, Mohammed Dukhi, Adrianus Indrat Aria, Vijay Kumar Thakur, and Muhammad A. Khan. "Self-Healing Mechanisms for 3D-Printed Polymeric Structures: From Lab to Reality." Polymers 12, no. 7 (2020): 1534. http://dx.doi.org/10.3390/polym12071534.

Повний текст джерела

Анотація:

Existing self-healing mechanisms are still very far from full-scale implementation, and most published work has only demonstrated damage cure at the laboratory level. Their rheological nature makes the mechanisms for damage cure difficult to implement, as the component or structure is expected to continue performing its function. In most cases, a molecular bond level chemical reaction is required for complete healing with external stimulations such as heating, light and temperature change. Such requirements of external stimulations and reactions make the existing self-healing mechanism almost

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Bellah, Masum, Michael Nosonovsky, Benjamin Church, and Pradeep Rohatgi. "Bioinspired self-healing nickel coating." RSC Advances 14, no. 46 (2024): 34239–52. http://dx.doi.org/10.1039/d4ra07469f.

Повний текст джерела

Анотація:

A self-healing anticorrosive nickel coating using poly(urea-formaldehyde) (PUF) shell microcapsules containing linseed oil triggers a self-healing response to damage similar to mechanisms observed in nature.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Oucif, Chahmi, George Z. Voyiadjis, and Timon Rabczuk. "Modeling of damage-healing and nonlinear self-healing concrete behavior: Application to coupled and uncoupled self-healing mechanisms." Theoretical and Applied Fracture Mechanics 96 (August 2018): 216–30. http://dx.doi.org/10.1016/j.tafmec.2018.04.010.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Tabrizian, Seyedreza Kashef, Seppe Terryn, Joost Brancart, Guy Van Assche, and Bram Vanderborght. "Mechanisms boosting material embodied intelligence to realize self-healing soft robots." IOP Conference Series: Materials Science and Engineering 1292, no. 1 (2023): 012006. http://dx.doi.org/10.1088/1757-899x/1292/1/012006.

Повний текст джерела

Анотація:

Abstract The recent introduction of self-healing soft materials in robotics is a major step towards sustainable next generation robots. By manufacturing soft robots out of these smart materials, we integrate a self-healing ability and increase the physical intelligence of these systems. However, the embodied intelligence in the material level needs to be augmented by incorporating assistive mechanisms in the system level with minimized control, enabling healing of damage in different sizes and in diverse working conditions. These assistive mechanisms can provide damage detection, damage closur

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Feng, Chao, and Yanbo Li. "Self-healing mechanisms toward stable photoelectrochemical water splitting." Chinese Journal of Catalysis 60 (May 2024): 158–70. http://dx.doi.org/10.1016/s1872-2067(23)64648-0.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Cremaldi, Joseph C., and Bharat Bhushan. "Bioinspired self-healing materials: lessons from nature." Beilstein Journal of Nanotechnology 9 (March 19, 2018): 907–35. http://dx.doi.org/10.3762/bjnano.9.85.

Повний текст джерела

Анотація:

Healing is an intrinsic ability in the incredibly biodiverse populations of the plant and animal kingdoms created through evolution. Plants and animals approach healing in similar ways but with unique pathways, such as damage containment in plants or clotting in animals. After analyzing the examples of healing and defense mechanisms found in living nature, eight prevalent mechanisms were identified: reversible muscle control, clotting, cellular response, layering, protective surfaces, vascular networks or capsules, exposure, and replenishable functional coatings. Then the relationship between

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Su, Cui Cui, and Jian Sheng Chen. "Self-Healing Polymeric Materials." Key Engineering Materials 727 (January 2017): 482–89. http://dx.doi.org/10.4028/www.scientific.net/kem.727.482.

Повний текст джерела

Анотація:

During the last few years, synthetic self-healing materials have become a new class of emerging smart materials with the ability to repair damage and restore lost or degraded properties or performance using resources inherently available to the system. Success in the design of self-healing materials is important to material safety, product reliability and prolonged lifetime. This article covers fundamental material-independent principles and different self-healing approaches for polymeric materials. Among these approaches, some depend on specific external stimulus to achieve their goal while o

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Self-healing mechanisms"

1

Worosylo, Jonathan Michael. "The modular survivable network protocol: Self-organizing and self-healing mechanisms to improve OSPF." Connect to online resource, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1456657.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Ghazali, Habibah. "Dual-Capsule Based Self-Healing of Epoxy and Carbon-Epoxy Laminated Composite." Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/15387.

Повний текст джерела

Анотація:

Since the year 2000, researchers have made extensive efforts to develop novel materials with self-healing ability by embedment of microencapsulated self-healing agents. The motivation behind these studies is to heal the crack once it occurs and to slow down crack growth in the materials. These materials were designed with the capability of repairing damage/fracture autonomously whenever it happens, and the materials subsequently recover their original properties. Many of the early-developed healing systems focused on the healing of polymers and their fibre-reinforced composites with a room tem

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Embaye, Natnael B. "Mechanism of self-healing of amplified spontaneous emission in the dye-doped polymer disperse orange 11 dye in PMMA polymer." Online access for everyone, 2007. http://www.dissertations.wsu.edu/Dissertations/Fall2007/N_Embaye_111907.pdf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zidan, Aboelsood Ali Abdelrohman. "Reconfiguration and Self-healing Mechanisms in Distribution Systems with High Distributed Generation (DG) Penetration." Thesis, 2013. http://hdl.handle.net/10012/8091.

Повний текст джерела

Анотація:

Recently, interest in Smart Grid (SG) as a tool for modernization and automation of the current distribution system has rapidly increased. This interest can be explained by the common belief that SG technologies greatly enhance system reliability, power quality and overall efficiency. One of the most important objectives of an SG is to accommodate a wide variety of generation options. This objective aligns with the new trends and policies that encourage higher penetration levels of Distributed Generation (DG) according to environmental, regulatory and economical concerns. Most DG units are eit

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Chang, Chi-Juin, and 章其鈞. "A New Self-healing Mechanism of Feeder Automation System." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/56f3y7.

Повний текст джерела

Анотація:

博士<br>國立臺北科技大學<br>電機工程系所<br>103<br>This thesis provided a new mechanism for improving feeder automation self-healing. Self-healing is generally the core function of smart grid. For the sake of achieving self-healing, Power utility has widely deployed feeder automation (FA) system with fault detection, isolation and restoration (FDIR) feature in its feeder configuration in Taiwan. The correctness of FDIR operation relies on the exact feeder terminal unit (FTU) overcurrent detecting curve setting and guarantees the success of self-healing. The calculation of FTU overcurrent detecting curve is al

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Peng, Jian-Jhih, and 彭建智. "Metathesis of Cyclopropene Derivatives: Discovering Self-Healing Mechanism in Polymer Synthesis." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/nxytdb.

Повний текст джерела

Анотація:

碩士<br>國立臺灣大學<br>化學研究所<br>106<br>In contrast to many cyclic strain olefins such as norbornene and cyclobutene, studies on metathesis of cyclopropene are relatively less extensive. In line with previous work in our laboratory, following the same design concept, monomers with N-aryl pendant and azaspiro[2.3]hex-1-ene was designed and synthesized. Fischer type carbenes have been considered as relatively less reactive carbenes compared with ruthenium alkylidenes, but they can still trigger metathesis reactions. The ring opening cross metathesis (ROCM) reactions of cyclopropene derivatives catalyzed

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Keskin, S. B., O. K. Keskin, O. Anil, et al. "Self-healing capability of large-scale engineered cementitious composites beams." 2016. http://hdl.handle.net/10454/8761.

Повний текст джерела

Анотація:

Yes<br>Engineered Cementitious Composites (ECC) is a material which possesses advanced self-healing properties. Although the self-healing performance of ECC has been revealed in numerous studies, only small-scale, laboratory-size specimens have been used to assess it under fixed laboratory conditions and curing techniques. In order to evaluate the effect of intrinsic self-healing ability of ECC on the properties of structural-size, large-scale reinforced-beam members, specimens with four different shear span to effective depth (a/d) ratios, ranging from 1 to 4, were prepared to evaluate the ef

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Huang, Chi-Han, and 黃啟翰. "Design of Packet Codec Architecture and Self-Healing Mechanism for Network-on-Chip." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/93f678.

Повний текст джерела

Анотація:

博士<br>國立臺北科技大學<br>電子工程系博士班<br>105<br>In order to enhance efficient transmission in multi-core chip, the Network on Chip (NoC) was proposed to replace bus communication architecture. However, the packet access and communication environment create some issues when it uses complicated communication architecture. In the terms of packet access, the NoC can improve throughput, however, it also enhances power consumption. This result is harmful in mobile device. Therefore, achieve both of high throughput and low power consumption for the NoC are important factors. In the terms of communication enviro

Стилі APA, Harvard, Vancouver, ISO та ін.

9

SUN, CHIEN-TING, and 孫健庭. "Key Management Technology with Collusion Resistance and Self-Healing Mechanism for Supervisory Control and Data Acquisition." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/tkq2ad.

Повний текст джерела

Анотація:

碩士<br>南臺科技大學<br>資訊工程系<br>107<br>These days, most industries use automatic systems to manage various devices. Some of them also use a network which can not only increase the efficiency of data transmission but also control devices from different places at the same time. However, many security issues of industrial systems have been noticed according to the development of the Internet. There are some attacks that may threaten industrial systems through the Internet. One of the most important systems is the supervisory control and data acquisition (SCADA for short). SCADA is a control system which

Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Self-healing mechanisms"

1

Rooij, Mario de. Self-Healing Phenomena in Cement-Based Materials: State-of-the-Art Report of RILEM Technical Committee 221-SHC: Self-Healing Phenomena in Cement-Based Materials. Springer Netherlands, 2013.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Blackler, Elias. Regenerative Medicine : Ignite Your Self-Healing Mechanisms: Stem Cell Based Regenerative Medicine. Independently Published, 2021.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Self-healing at the nanoscale: Mechanisms and key concepts of natural and artificial systems. CRC Press, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Amendola, Vincenzo. Self-Healing at the Nanoscale: Mechanisms and Key Concepts of Natural and Artificial Systems. Taylor & Francis Group, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Amendola, Vincenzo, and Moreno Meneghetti. Self-Healing at the Nanoscale: Mechanisms and Key Concepts of Natural and Artificial Systems. Taylor & Francis Group, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Amendola, Vincenzo, and Moreno Meneghetti. Self-Healing at the Nanoscale: Mechanisms and Key Concepts of Natural and Artificial Systems. Taylor & Francis Group, 2018.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Amendola, Vincenzo, and Moreno Meneghetti. Self-Healing at the Nanoscale: Mechanisms and Key Concepts of Natural and Artificial Systems. Taylor & Francis Group, 2011.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Benkler, Yochai, Robert Faris, and Hal Roberts. Mainstream Media Failure Modes and Self-Healing in a Propaganda-Rich Environment. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780190923624.003.0006.

Повний текст джерела

Анотація:

This chapter examines how mainstream media operated in a propaganda-rich environment by focusing on its failure and recovery modes. In particular, this chapter analyzes two central attributes of mainstream media and professional journalism that shaped election coverage, and in some cases made them particularly susceptible to being manipulated into spreading right-wing propaganda: balance and the scoop culture. The chapter first considers how internal dynamics of news reporting led mainstream media to emphasize the email investigation over substantive discussion of politics. The chapter then sh

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Gertrude, Alexander. Music Therapy & Me: Healing Trauma to Reduce Anxiety, Help with Stress Management and Memory, Foster Healthy Coping Mechanisms, and Improve Self-Esteem and Overall Well-Being. Primedia eLaunch LLC, 2023.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Li, Guoqiang. Self-Healing Composites. Wiley & Sons, Incorporated, John, 2014.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Self-healing mechanisms"

1

Phogat, Peeyush, Shreya Sharma, Soumya Rai, and Jahanvi Thakur. "Mechanisms of Self-healing." In Engineering Materials. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-6767-3_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Bhushan, Bharat. "Self-healing Materials and Defense Mechanisms." In Biomimetics. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-71676-3_23.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Remmers, Joris J. C., and René de Borst. "Numerical Modelling of Self Healing Mechanisms." In Springer Series in Materials Science. Springer Netherlands, 2007. http://dx.doi.org/10.1007/978-1-4020-6250-6_17.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Guadagno, L., C. Naddeo, L. Vertuccio, E. Calabrese, G. Barra, and M. Raimondo. "Self-Healing Mechanisms in Multifunctional Structural Materials." In Revolutionizing Aircraft Materials and Processes. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-35346-9_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Stankiewicz, Alicja, and Katarzyna Zielińska. "Self-Healing Mechanisms in Smart Protective Coatings." In Supramolecular Chemistry in Corrosion and Biofouling Protection. CRC Press, 2021. http://dx.doi.org/10.1201/9781003169130-10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Marquezan, Clarissa Cassales, André Panisson, Lisandro Zambenedetti Granville, Giorgio Nunzi, and Marcus Brunner. "Maintenance of Monitoring Systems Throughout Self-healing Mechanisms." In Managing Large-Scale Service Deployment. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-87353-2_14.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Kanellopoulos, Antonios. "Self-Healing Cement-Based Materials: Mechanisms and Assessment." In Engineering Materials and Processes. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-86880-2_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Najafpour, Mohammad Mahdi, Seyed Esmael Balaghi, Moayad Hossaini Sadr, Behzad Soltani, Davood Jafarian Sedigh, and Suleyman I. Allakhverdiev. "Self-Healing in Nano-sized Manganese-Based Water-Oxidizing Catalysts." In Photosynthesis: Structures, Mechanisms, and Applications. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-48873-8_16.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Khan, Muhammad Adeel, Weizhen Chen, Boshan Zhang, Jahangir Badar, and Zhao Rui. "Strategies for Enhancing Self-Healing in Ultra-High Performance Concrete: An Experimental Investigation." In Mechanisms and Machine Science. Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-77489-8_64.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Lu, Jingxian, Christophe Dousson, Benoit Radier, and Francine Krief. "Towards an Autonomic Network Architecture for Self-healing in Telecommunications Networks." In Mechanisms for Autonomous Management of Networks and Services. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13986-4_16.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Self-healing mechanisms"

1

Jeffery, Oliver, Agostino Maurotto, Pierluigi Chiovaro, Pietro Alessandro Maio, Richard Ambrosi, and Ramy Mesalam. "Impedance Spectroscopy for Unraveling Self-Healing Mechanisms in Half-Heusler Thermoelectric Alloys." In Nuclear and Emerging Technologies for Space (NETS 2025). American Nuclear Society, 2025. https://doi.org/10.13182/xyz-47381.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Prout, Jonathan, Zineb Belarbi, and Ömer Doğan. "The Effect of Flow on CO2 Corrosion of Self-Healing Metallic Coatings." In CONFERENCE 2025. AMPP, 2025. https://doi.org/10.5006/c2025-00187.

Повний текст джерела

Анотація:

Abstract Internal corrosion is an issue that affects natural gas pipelines, a significant part of the United States’ energy infrastructure. Over time, this corrosion has worn away longstanding pipelines due to the original construction materials used for the lines and impurities in the gas and liquid streams flowing through them. The main impurities in natural gas are H2O, CO2, H2S, and O2. One of the leading causes of corrosion is the CO2 dissolved in water, giving rise to carbonic acid formation, which can further dissolve the steel pipe. The National Energy Technology Laboratory (NETL) has

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Kirchheiner, R., and J. L. Jiménez Soler. "Correlation of Oxidation, Carburization and Metal Dusting; “Controlling Corrosion by Corrosion”." In CORROSION 2001. NACE International, 2001. https://doi.org/10.5006/c2001-01374.

Повний текст джерела

Анотація:

Abstract Metal dusting has been observed in industrial high temperature process components such as waste heat boilers in reformers and gas pre-heaters in direct reduction plants. This corrosion phenomenon is a disintegration of metallic materials into carbon (graphite) and metal dust. The degradation takes place in strongly carburizing atmospheres with carbon activities greater 1 (ac≫1) and at intermediate temperatures between 400 °C - 900 °C. Slight modifications in the process conditions may affect significantly the occurrence and extent of metal dusting attack. To correlate high temperature

Стилі APA, Harvard, Vancouver, ISO та ін.

4

HESPANHOL, DEIVISON CARLOS FONTES, and HELOISA DALTOSO ORSOLINI. "SELF-HEALING MICROSTRUCTURE: THE UTMOST REFRACTORY TOUGHNESS MECHANISM." In 52º Seminário de Redução de Minérios e Matérias-Primas. Editora Blucher, 2024. http://dx.doi.org/10.5151/2594-357x-41118.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Saul, Alexander, Thibaut Charpentier, Anne Neville, et al. "Iron Carbonate Based Slippery Liquid Infused Porous Surfaces (SLIPS) for Enhanced Mineral Fouling Resistance." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16645.

Повний текст джерела

Анотація:

Abstract Inorganic surface fouling is a problematic issue that poses both economic and safety risks to a number of industries, particularly the oil and gas sector. Current scale prevention methods vary and can be both costly and inefficient. LIS (Liquid infused/Lubricant Impregnated Surfaces) or SLIPS (Slippery Liquid Infused Porous Surfaces) represent a new development that has the potential to provide a surface engineering solution to the scale dilemma. SLIPS are driven by a low surface energy lubricant held in place by a textured surface, underpinning the surfaces self-healing, self-cleanin

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Sun, Wen, Xu Li, Tao Li, and Aiqun Hu. "Research on bionic mechanism based adaptive collaborative self-healing method." In 2025 5th International Symposium on Computer Technology and Information Science (ISCTIS). IEEE, 2025. https://doi.org/10.1109/isctis65944.2025.11065611.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Ismadi, Nurul Fatihah Binti, Nurul Aizan Mohd Zaini, Dalina Samsudin, Faiezah Hashim, and Zainathul Akhmar Salim Binti Abdul Salim. "Preparation and Characterization of Self-Healing Natural Rubber (NR) Based on Zinc Diacrylate Networks." In International Conference on X-Rays and Related Techniques in Research and Industry 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-1eg0qf.

Повний текст джерела

Анотація:

Nowadays, the use of rubber products such as tyres, bearings, shoe soles, hoses, and cables are increasing due to its high strain to failure. However, the indestructible cross-linking of sulphur or peroxide chains in vulcanized rubber could complicate the biodegradation, reprocessing, and recycling of rubber products. Due to these crucial problems, the increasing number of rubber-based products worldwide will lead to environmental hazards. An alternative strategy to address this problem is to give elastomers the ability to self-heal, thus promoting their reusability. Zinc diacrylate (ZDA) salt

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Tadakuma, Kenjiro, Shohei Inomata, Masahiro Watanabe, et al. "Robotic Blood Vessel Mechanism to Realize Active Self-Healing Function for Inflatable Actuators^*." In 2024 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). IEEE, 2024. http://dx.doi.org/10.1109/aim55361.2024.10637230.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Mirjanić, Jelena, Tiana Milović, Vesna Bulatović, Olja Šovljanski, and Igor Džolev. "SELF-HEALING CONCRETE: MATERIALS AND MECHANISMS." In XXIX kongres DIMK i X kongres SIGP sa Međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija. Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, 2025. https://doi.org/10.46793/29dimk.156m.

Повний текст джерела

Анотація:

Cracks in concrete structures represent a persistent issue that compromises their reliability and durability. Traditional repair methods are expensive and often impractical, especially for large-scale infrastructure projects. Self-healing concrete offers an innovative solution through autogenous and autonomous healing approaches. According to research, autogenous mechanisms are effective for cracks up to 150 µm, while autonomous methods can seal cracks up to 500 µm, improving mechanical properties, water tightness, and resistance to external influences. This paper analyzes materials, and mecha

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Ibrahim, Mohamed A., Iman S. El-Mahallawi, Tarek M. Hatem, and Sarah Khalil. "Intrinsic Mechanisms of Self-Healing in Metallic Structures." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24094.

Повний текст джерела

Анотація:

Abstract Self-healing is the ability of a material to repair damages automatically. Approaches to self-healing are separated into two major categories, those are: 1) autonomous healing methods that depend on intrinsic mechanisms, and 2) assisted healing methods that need an external intervention. Recently, computational methods have gained a wide application to study self-healing in metals using molecular dynamics (MD) and finite element (FE) methods. These methods can be used to demonstrate and optimize different metallic alloys potential to self-heal, and to further tailor these metallic str

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Self-healing mechanisms"

1

Zhu, Sencun, Guohong Cao, and Peng Liu. Distributed Self-healing Mechanisms for Securing Sensor Networks. Defense Technical Information Center, 2010. http://dx.doi.org/10.21236/ada518946.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Pasupuleti, Murali Krishna. Quantum Intelligence: Machine Learning Algorithms for Secure Quantum Networks. National Education Services, 2025. https://doi.org/10.62311/nesx/rr925.

Повний текст джерела

Анотація:

Abstract: As quantum computing and quantum communication technologies advance, securing quantum networks against emerging cyber threats has become a critical challenge. Traditional cryptographic methods are vulnerable to quantum attacks, necessitating the development of AI-driven security solutions. This research explores the integration of machine learning (ML) algorithms with quantum cryptographic frameworks to enhance Quantum Key Distribution (QKD), post-quantum cryptography (PQC), and real-time threat detection. AI-powered quantum security mechanisms, including neural network-based quantum

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!