Готові списки джерел за темами / Shape of building

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій
  6. Звіти організацій

Добірка наукової літератури з теми "Shape of building"

Автор: Grafiati
Опубліковано: 3 червня 2025
Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Shape of building".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Shape of building"

1

Sazzad, Md Mahmud, and Md Samdani Azad. "Effect of building shape on the response to wind and earthquake." International Journal of Advanced Structures and Geotechnical Engineering 4, no. 4 (2015): 232–36. https://doi.org/10.5281/zenodo.1066648.

Повний текст джерела
Анотація:
With the increase in the application of modern technologies in Civil Engineering, construction of high rise buildings is increasing very hastily. Such buildings are prone to lateral loads from wind or earthquake. Numerous approaches have been adopted to minimize the severe effects of lateral loads on the high rise buildings. Shape of building is one of such approaches. This paper presents a numerical study of the effect of building shape on the response to wind and earthquake. Three different shapes of buildings have been considered in the present study and a comparison between different shape
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Zou, Xinyan, Min Yang, Siyu Li, and Hai Hu. "Classifying the Shapes of Buildings by Combining Distance Field Enhancement and a Convolution Neural Network." ISPRS International Journal of Geo-Information 13, no. 11 (2024): 411. http://dx.doi.org/10.3390/ijgi13110411.

Повний текст джерела
Анотація:
The shape classification of building objects is crucial in fields such as map generalization and spatial queries. Recently, convolutional neural networks (CNNs) have been used to capture high-level features and classify building shape patterns based on raster representations. However, this raster-based deep learning method binarizes the areas into building and non-building zones and does not account for the distance information between these areas, potentially leading to the loss of shape feature information. To address this limitation, this study introduces a building shape classification met
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Jha, Abhay Kumar, Anil Kumar Saxena, Vivek Kumar Mishra, Rajesh Misra, and Sandeep Choudhary. "Assessment of Seismic and Wind Load Resistance in High-Rise Building Designs: A Comparison of Geometric Shapes." European Journal of Theoretical and Applied Sciences 3, no. 2 (2025): 133–39. https://doi.org/10.59324/ejtas.2025.3(2).11.

Повний текст джерела
Анотація:
As the world moves towards modernisation, population growth has led to one of the most pressing challenges - limited land availability. To address this issue, the conventional approach of horizontal building designs needs to be reconsidered and the focus should shift to high-rise buildings. This study explores the design of a 50-storey high-rise building using different geometric shapes, namely rectangular, square, triangular, circular and elliptical. The design is based on keeping parameters such as floor area, column size, beam size and slab thickness constant across all shapes. Following th
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Abhay, Kumar Jha, Kumar Saxena Anil, Kumar Mishra Vivek, Misra Rajesh, and Choudhary Sandeep. "Assessment of Seismic and Wind Load Resistance in High-Rise Building Designs: A Comparison of Geometric Shapes." European Journal of Theoretical and Applied Sciences 3, no. 2 (2025): 133–39. https://doi.org/10.59324/ejtas.2025.3(2).11.

Повний текст джерела
Анотація:
As the world moves towards modernisation, population growth has led to one of the most pressing challenges - limited land availability. To address this issue, the conventional approach of horizontal building designs needs to be reconsidered and the focus should shift to high-rise buildings. This study explores the design of a 50-storey high-rise building using different geometric shapes, namely rectangular, square, triangular, circular and elliptical. The design is based on keeping parameters such as floor area, column size, beam size and slab thickness constant across all shapes. Following th
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ying, Xiaoyu, and Wenzhe Li. "Effect of Floor Shape Optimization on Energy Consumption for U-Shaped Office Buildings in the Hot-Summer and Cold-Winter Area of China." Sustainability 12, no. 5 (2020): 2079. http://dx.doi.org/10.3390/su12052079.

Повний текст джерела
Анотація:
This paper explored the effects of the side proportion of building floor shape on building energy consumption. It is based on the analysis of regression models that were developed in the present study. The simplified building models can be used to conduct a parametric study to investigate the effect of building plane shape parameters on total heating and cooling load. DesignBuilder was used to build and simulate individual building configuration. Energy consumption simulations for forty-eight U-shaped buildings with different plane layouts were performed to create a comprehensive dataset cover
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Jiang, Lei, Weiqing Liu, Haiping Liao, and Jiabao Li. "Investigation of the Geometric Shape Effect on the Solar Energy Potential of Gymnasium Buildings." Energies 13, no. 23 (2020): 6369. http://dx.doi.org/10.3390/en13236369.

Повний текст джерела
Анотація:
Gymnasium are typically large-span buildings with abundant solar energy resources due to their extensive roof surface. However, relevant research on this topic has not been thoroughly conducted to investigate the effect of the geometric shape of gymnasium buildings on their solar potential. In this paper, an investigation of the geometric shape effect on the solar potential of gymnasium buildings is presented. A three-dimensional radiation transfer model coupled with historical meteorological data was established to estimate the real-time solar potential of the roof of a gymnasium building. Th
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wang, Xiao, Haizhong Qian, Limin Xie, Xu Wang, and Bohao Li. "Recognition and Classification of Typical Building Shapes Based on YOLO Object Detection Models." ISPRS International Journal of Geo-Information 13, no. 12 (2024): 433. https://doi.org/10.3390/ijgi13120433.

Повний текст джерела
Анотація:
The recognition and classification of building shapes are the prerequisites and foundation for building simplification, matching, and change detection, which have always been important research problems in the field of cartographic generalization. Due to the ambiguity and uncertainty of building shape outlines, it is difficult to describe them using unified rules, which has always limited the quality and automation level of building shape recognition. In response to the above issues, by introducing object detection technology in computer vision, this article proposes a building shape recogniti
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Yusupov, A. K., H. M. Musеlеmov, and R. I. Vishtalov. "Systems with optimal geometric shapes." Herald of Dagestan State Technical University. Technical Sciences 50, no. 2 (2023): 188–96. http://dx.doi.org/10.21822/2073-6185-2023-50-2-188-196.

Повний текст джерела
Анотація:
Objective. In this paper, buildings of various shapes that have high seismic resistance are considered. Such seismic resistance is provided by the rational shape and outlines of the building itself. Here, the influence of the torsion of the building in the plan is minimized, thereby eliminating large stresses at the ends of the designed building. At the same time, the translational movement of the building in the plan is preserved.Method. By optimizing the shape and shape of buildings for various purposes, high efficiency of the structure is ensured under seismic effects. By comparing the shap
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Pandey, Adhya. "Dynamic Wind Analysis of Different Shapes Tall Building." International Journal for Research in Applied Science and Engineering Technology 13, no. 3 (2025): 1174–77. https://doi.org/10.22214/ijraset.2025.67497.

Повний текст джерела
Анотація:
Tall buildings are increasingly becoming a norm in urban landscapes, and their design and construction require careful consideration of various factors, including wind loads. This study investigates the dynamic wind analysis of different shape tall buildings, with a focus on understanding the effects of wind loads on building stability and safety. analyse the wind load effects on different shape tall buildings. The results show that wind load effects vary significantly depending on building shape, size, and orientation. The study provides valuable insights into the design of tall buildings, hi
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Pandey, Adhya. "Dynamic Wind Analysis of Different Shapes Tall Building." International Journal for Research in Applied Science and Engineering Technology 13, no. 3 (2025): 1178–91. https://doi.org/10.22214/ijraset.2025.67498.

Повний текст джерела
Анотація:
Tall buildings are increasingly becoming a norm in urban landscapes, and their design and construction require careful consideration of various factors, including wind loads. This study investigates the dynamic wind analysis of different shape tall buildings, with a focus on understanding the effects of wind loads on building stability and safety. analyse the wind load effects on different shape tall buildings. The results show that wind load effects vary significantly depending on building shape, size, and orientation. The study provides valuable insights into the design of tall buildings, hi
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Shape of building"

1

Su, Z. "Statistical shape modelling : automatic shape model building." Thesis, University College London (University of London), 2011. http://discovery.ucl.ac.uk/1213097/.

Повний текст джерела
Анотація:
Statistical Shape Models (SSM) have wide applications in image segmentation, surface registration and morphometry. This thesis deals with an important issue in SSM, which is establishing correspondence between a set of shape surfaces on either 2D or 3D. Current methods involve either manual annotation of the data (current ‘gold standard’); or establishing correspondences by using segmentation or registration algorithms; or using an information technique, Minimum Description Length (MDL), as an objective function that measures the utility of a model (the state-of-the-art). This thesis presents
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Moyer, Craig E. "Vox Populi: The Crowdsourced Building." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1463130553.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Gupta, Vimal kumar. "Structural control of building frames subjected to earthquake induced excitations using shape memory alloys." Thesis, IIT Delhi, 2016. http://localhost:8080/iit/handle/2074/7015.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Swiegers, Jacobus Johannes. "Inlet and outlet shape design of natural circulation building ventilation systems." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/97110.

Повний текст джерела
Анотація:
Thesis (MEng)--Stellenbosch University, 2015.<br>ENGLISH ABSTRACT: Increased awareness of environmental problems has awakened interest in renewable energy systems. Natural ventilation systems are especially of interest, as people spend most of their time indoors. Indoor air quality is an important consideration when human health and occupant comfort is to be maintained. This study focusses on determining the best inlet and outlet shape for a natural ventilation system from a chosen set of configurations. The inlet and outlet configurations were tested on a PDEC (Passive Downdraught Evap
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Olsson, Martin. "Thermal Shape Factor : The impact of the building shape and thermal properties on the heating energy demand in Swedish climates." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-125076.

Повний текст джерела
Анотація:
In the year 2006, the energy performance directive 2002/91/EG was passed by the European Union, according to this directive the Swedish building code was supplemented by a key measure of energy use intensity (EUI). The implemented EUI equals some energy use within a building divided by its floor area and must be calculated in new housing estate and shown when renting or selling housing property. In order to improve the EUI, energy efficiency refurbishments could be implemented. Building energy simulation tools enables a virtual view a building model and can estimate the energy use before imple
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Cai, Bin, Arezoo Dianat, Rene Hübner, et al. "Multimetallic Hierarchical Aerogels: Shape-engineering of the Building Blocks for efficient electrocatalysis." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2018. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-236145.

Повний текст джерела
Анотація:
A new class of multimetallic hierarchical aerogels composed entirely of interconnected Ni‐PdxPty nano‐building‐blocks with in situ engineered morphologies and compositions is demonstrated. The underlying mechanism of the galvanic shape‐engineering is elucidated in terms of nanowelding of intermediate nanoparticles. The hierarchical aerogels integrate two levels of porous structures, leading to improved electrocatalysis performance.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Mora, Carlos F. "Particle size and shape analysis of coarse aggregate using digital image processing." Thesis, Hong Kong : University of Hong Kong, 2000. http://sunzi.lib.hku.hk/hkuto/record.jsp?B22030153.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Liu, Yang. "Quantitative Comparison of Lidar Data and User-generated Three-dimensional Building Models From Google Building Maker." Thesis, University of North Texas, 2012. https://digital.library.unt.edu/ark:/67531/metadc149632/.

Повний текст джерела
Анотація:
Volunteered geographic information (VGI) has received increased attention as a new paradigm for geographic information production, while light detection and ranging (LiDAR) data is widely applied to many fields. This study quantitatively compares LiDAR data and user-generated 3D building models created using Google Building Maker, and investigate the potential applications of the quantitative measures in support of rapid disaster damage assessment. User-generated 3D building models from Google Building Maker are compared with LiDAR-derived building models using 3D shape signatures. Eighteen 3D
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Nelson, Eric (Eric Freeman) 1964. "Dynamic building enclosures : the design of an innovative constructive system which permits mechanically-driven, computer-controlled shape transformations to the building envelope." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/69400.

Повний текст джерела
Анотація:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Architecture, 1998.<br>Includes bibliographical references (p. 85).<br>Dynamic Building Enclosures is a system of prefabricated, lightweight, kit-of-parts wall and/or roof elements. This system has the unique capability of dynamically altering, or mutating its shape in reaction to changing user requirements or site climate conditions through the manipulation of a mechanically-driven, computer-controlled frame. The system's ability to actively accommodate multiple functions (potentially with high-performance specifications) within a
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Pérez, Sala Xavier. "Extending procrustes analysis : building multi-view 2-D models from 3-D human shape samples." Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/299209.

Повний текст джерела
Анотація:
This dissertation formalizes the construction of multi-view 2D shape models from 3D data. We propose several extensions of the well-known Procrustes Analysis (PA) algorithm that allow modeling rigid and non-rigid transformations in an efficient manner. The proposed strategies are successfully tested on faces and human bodies datasets. In human perception applications one can set physical restrictions, such as defining faces and human skeletons as sets of anatomical landmarks or articulated bodies. However, the high variation of facial expressions and human postures from different viewpoints m
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Shape of building"

1

Samantha, Berger, ed. Building shapes. Scholastic, 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

1949-, Bobenhausen William, ed. American building: The environmental forces that shape it. Oxford University Press, 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Terry, Webb, ed. Building libraries for the 21st century: The shape of information. McFarland, 2000.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Warner, Kee. Building rules: How local controls shape community environments and economies. Westview Press, 2000.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Eyad, Masad, National Cooperative Highway Research Program., American Association of State Highway and Transportation Officials., United States. Federal Highway Administration., and National Research Council (U.S.). Transportation Research Board., eds. Test methods for characterizing aggregate shape, texture, and angularity. Transportation Research Board, 2007.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Bejan, Adrian, and Giuseppe Grazzini, eds. Shape and Thermodynamics. Firenze University Press, 2008. http://dx.doi.org/10.36253/978-88-8453-836-9.

Повний текст джерела
Анотація:
Shape and Thermodynamics is a two-day international Workshop focused on the Constructal Theory of generation of configuration in nature and engineering. From the early developments related to tree configurations for the cooling of electronics, today Constructal theory is being applied to conceptual design of transportation net-works, river basins, living bodies, building materials and many other flow systems. Constructal theory is also enriching thermo-dynamics, from basic theory to design and optimization. This theory approaches design "as science", with the generation of configuration regard
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Rissman, Rebecca. Shapes in buildings. Heinemann Library, 2008.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Rissman, Rebecca. Las formas en los edificios. Heinemann Library, 2009.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Foundation, Stanley, American Association of University Women., Church Women United, National Association of Commissions for Women., and Women's Environment & Development Organization., eds. Building on Beijing: United States NGOs shape a women's national action agenda. Stanley Foundation, 1997.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Foundation, Stanley, American Association of University Women, Church Women United, National Association of Commissions for Women., and Women's Environment and Development Association., eds. Building on Beijing: United States NGOs shape a women's national action agenda. The Stanley Foundation, 1997.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Shape of building"

1

Wang, Yiping, and Bo Wang. "CFD Numerical Simulation Analysis of Wind Load Based on BIM." In Novel Technology and Whole-Process Management in Prefabricated Building. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_45.

Повний текст джерела
Анотація:
AbstractFor high-rise circular buildings, based on the values of wind load shape coefficients without similar shapes in the building structural load specifications, this project is based on BIM technology and combines BIM technology with CFD technology. Through CFD numerical simulation method, SST k-w turbulence model is used to simulate the surrounding wind field and 8 wind directions of the simplified single building model, and the overall and local wind loads of the building are studied and analyzed, determine the wind load shape coefficient to provide reference for circular buildings. The
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fang, Cheng, and Wei Wang. "Structural Responses: Multi-storey Building Frames." In Shape Memory Alloys for Seismic Resilience. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7040-3_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lüthi, Marcel, Thomas Albrecht, and Thomas Vetter. "Building Shape Models from Lousy Data." In Medical Image Computing and Computer-Assisted Intervention – MICCAI 2009. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-04271-3_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tanaya, Michael, Huaming Chen, Jebediah Pavleas, and Kelvin Sung. "Completing the Physics Engine and Rigid Shape Component." In Building a 2D Game Physics Engine. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-2583-7_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Skowronski, Andrzej. "Optimum Building Shape in View of Energy Saving." In Universal Access in Human-Computer Interaction. Design Methods, Tools, and Interaction Techniques for eInclusion. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-39188-0_37.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Dick, A. R., P. H. S. Torr, and R. Cipolla. "A Bayesian Estimation of Building Shape Using MCMC." In Computer Vision — ECCV 2002. Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/3-540-47967-8_57.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wu, Yihan, Weifeng Li, Ningyi Zeng, and Xiaoxia Bai. "Analyzing the Impact of Tall Building Geometries on Wind Environment in a Hypothetical Urban Context: A Typological and Parametric Study." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-8401-1_40.

Повний текст джерела
Анотація:
AbstractInfill development has become a popular strategy for revitalizing old urban districts. However, the construction of new high-rise buildings can cause nuisance issues that are of great concern to indigenous residents. Our study seeks to address three key research questions by examining the impacts of 34 high-rise building typologies within a hypothetical urban context: 1) To what spatial extent does the construction of new high-rise buildings significantly affect their surroundings? 2) How do different tall building typologies modify their surrounding buildings’ outdoor and indoor venti
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Grbić, Saša, Joshua K. Y. Swee, and Razvan Ionasec. "ShapeForest: Building Constrained Statistical Shape Models with Decision Trees." In Computer Vision – ECCV 2014. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-10578-9_39.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Bairagi, Amlan Kumar, and Sujit Kumar Dalui. "Distribution of Wind Pressure Around Different Shape Tall Building." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3254-2_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Klainsek, Juan C. "The Influence of Glassing Shape on Building Thermal Performance." In 1989 2nd European Conference on Architecture. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-017-0556-1_124.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Shape of building"

1

Bittner, Ksenia, Michael Recla, Stefan Auer, and Michael Schmitt. "Enhancing Building Shape Details Through Deep Learning in Single-Image SAR-Based DSM." In IGARSS 2024 - 2024 IEEE International Geoscience and Remote Sensing Symposium. IEEE, 2024. http://dx.doi.org/10.1109/igarss53475.2024.10640848.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Seyfullayeva, Aysel, and Fidan Aliyeva. "A Lung System for the Martian Shape-Shifter." In 22nd IAA Symposium on Building Blocks for Future Space Exploration and Development, Held at the 75th International Astronautical Congress (IAC 2024). International Astronautical Federation (IAF), 2024. https://doi.org/10.52202/078374-0044.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Uremovic, Boris, Mandi Orlic Bachler, and Domagoj Sojat. "VIRTUAL PARAMETRIC 3D MODEL OF A PEDESTRIAN BRIDGE ON A 3D VORONOI DIAGRAM." In 11th SWS International Scientific Conferences on ART and HUMANITIES - ISCAH 2024. SGEM WORLD SCIENCE, 2024. https://doi.org/10.35603/sws.iscah.2024/s09.22.

Повний текст джерела
Анотація:
The shape of all constructions has its origin in a geometric shape, such as a cuboid, a pyramid or a cylinder. Every builder (architect or civil engineer) has determined the choice of geometric shape for the requirements of a building primarily by its purpose, but in addition to this utilitarian condition, he also wanted to achieve a certain aesthetic impression. This desire to achieve the desired aesthetic impression led to the use of increasingly complex shapes and their combinations, and this became even easier and simpler with the use of 3D modelling technologies on the computer. The aim o
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Umar, Muhammad Zakaria, Abdul Mufti Radja, Mohammad Mochsen Sir, and Afifah Harisah. "Review-Journal: Architectural Morphology in the Grand Mosque Building of the Sultanate of Buton." In International Conference on Research in Engineering and Science Technology (IC-REST) 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-yrwh6a.

Повний текст джерела
Анотація:
Buton Island is one of the largest Islamic Sultanate territories in Indonesia. One of the remains of the Buton Sultanate is the Grand Mosque of the Buton Sultanate (TGMOTSOB). TGMOTSOB was founded in 1537 and 1929 and renovated by the 37th Sultan of Buton. Over time TGMOTSOB has experienced changes in the appearance of the building. Changes in form in architecture fall within the scope of synchronic and diachronic. Changes in architecture and morphology correlate synchronically and diachronically. This correlation is important to explore to explain changes in ideas and meanings in the history
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Al-Anzi, Adnan, Donghyun Seo, and Moncef Krarti. "Impact of Shape on Thermal Performance of Office Buildings in Kuwait." In ASME 2007 Energy Sustainability Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/es2007-36242.

Повний текст джерела
Анотація:
This paper provides a simplified analysis method to estimate the impact of building shape on energy efficiency of office buildings in Kuwait. The method is based on results obtained from a comprehensive whole building energy simulation analysis. The analysis takes into account several building shapes and forms including rectangular, L-shape, U-shape, and H-shape as well as building aspect ratios, window-to-wall-ratios, and glazing types. The simplified method is suitable for architects during preliminary design phase to assess the impact of shape on the energy efficiency of office buildings.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Musiał, Robert. "Practical importance of the shape of a tall building in the city space." In Virtual City and Territory. Centre de Política de Sòl i Valoracions, 2016. http://dx.doi.org/10.5821/ctv.8053.

Повний текст джерела
Анотація:
The development of construction technology creates ever greater opportunities for designing tall buildings with unusual shapes. So the question remains: what role might the shape of a tall building play in developing a legible and imageable environment?&#x0D; The paper aims to show the importance of the shape of a tall building for imageability and legibility of the urban environment, on the basis of previously published analyses by various authors, which are part of wider studies on: placemaking with tall buildings, imageability of tall buildings and orientation in the urban space.&#x0D; The
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Pappas, Alexandra, Eric Loew, Tim Scotland-Stewart, and Moncef Krarti. "Impact of Shape on Residential Buildings Energy Performance." In ASME 2005 International Solar Energy Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/isec2005-76175.

Повний текст джерела
Анотація:
The impact of the shape on energy performance for residential buildings has been investigated using a series of simulation analyses. The shape of a building is quantified by its compactness relative to a reference building. In this paper, the performance of a prototypical residential building with various shapes is investigated for selected locations in the US. Various window-to-wall ratios are considered in the analysis. The findings indicate that significant energy can be saved when the shape and the window-to-wall ratio of the building are optimized. A simplified evaluation method is provid
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ouertani, Kais, and Moncef Krarti. "Impact of Shape on Building Energy Use in Tunisia." In ASME 2006 International Solar Energy Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/isec2006-99135.

Повний текст джерела
Анотація:
This paper investigates the impact of the architectural form on the energy performance of residential buildings in Tunisia. A relative compactness is defined as one indicator of a building shape. The results of the analysis indicate that a significant decrease in heating and cooling energy requirements can be obtained by minimizing the relative compactness of detached residential houses. A simplified analysis tool, suitable for early design process, is developed to assess the impact of building form on its energy performance for several cities in Tunisia.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Mahan Singh, Manav, and Philipp Geyer. "CNN-based quick energy prediction model using image analysis for shape information." In 2021 Building Simulation Conference. KU Leuven, 2021. http://dx.doi.org/10.26868/25222708.2021.30250.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Watkin, Samuel, Michael Foon, and Simon Liddell. "Building Sustainable Climate Change Resilience in Kiribati." In Coastal Management 2019: Joining forces to shape our future coasts. ICE Publishing, 2020. http://dx.doi.org/10.1680/cm.65147.057.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Shape of building"

1

Stender, Anthony. Rod-like plasmonic nanoparticles as optical building blocks: how differences in particle shape and structural geometry influence optical signal. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1116721.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Hagenlocher, Michael, Sanae Okamoto, Nidhi Nagabhatla, et al. Building Climate Resilience: Lessons from the 2021 Floods in Western Europe. United Nations University - Institute for Environment and Human Security (UNU-EHS), 2023. http://dx.doi.org/10.53324/incs5390.

Повний текст джерела
Анотація:
In July 2021, the Rhine-Meuse region straddling Belgium, Germany and the Netherlands was affected by devastating floods that have led to the loss of more than 240 lives and damage worth billions of Euros. The event was closely watched by regional agencies that had to organize response and recovery, and also received noticeable global attention. Diverse sets of responses and reflections accumulated among researchers, local and regional governments, local and international media, development organizations, public offices and citizen groups, wherein links to climate change and gaps in our prepare
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Mangrulkar, Amol, Archita Suryanarayanan, Elizabeth Shilpa Abraham, and Kirthan Shekar. Making of the Riparian Amphitheatre. Edited by Aromar Revi, Rahul Mehrotra, and Sanjay Prakash. Indian Institute for Human Settlements, 2023. http://dx.doi.org/10.24943/9788195847365.

Повний текст джерела
Анотація:
This book focuses on the five key design questions that have been addressed in the design of a Riparian Amphitheatre and its execution that have shaped its form, integration into land and waterscape, structure, services and choice of building material and systems. The book documents the attempts to present a balanced account of the processes; materials, energy, carbon and the financial costs involved, the time and effort taken to plan, design and construct the Riparian Amphitheatre at the IIHS Campus. The book will inform and inspire planners and designers of institutional campuses and public
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Williams, Teshanee, Jamie McCall, Maureen Berner, and Anita Brown-Graham. Strategic Capacity Building in Community Development Organizations Post COVID-19: A Multi-Dimensional Approach to Describing Social Capital. Carolina Small Business Development Fund, 2020. http://dx.doi.org/10.46712/social-capital-covid19-recovery/.

Повний текст джерела
Анотація:
Much like the 2008 financial crisis, the aftermath of the COVID-19 pandemic will likely shape historically underserved communities for decades to come. Now, more than perhaps ever before, community development organizations (CDOs) will be central actors and foundational institutions for sustainable economic growth. Our data suggest social capital is important for CDO capacity across multiple dimensions. Given the central role CDOs will likely play in rebuilding local economies in the wake of the pandemic, we highlight how these organizations can use social capital to maintain and build politic
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ayoul-Guilmard, Q., F. Nobile, S. Ganesh, et al. D6.4 Report on stochastic optimisation for unsteady problems. Scipedia, 2021. http://dx.doi.org/10.23967/exaqute.2021.2.003.

Повний текст джерела
Анотація:
This report brings together methodological research on stochastic optimisation and work on benchmark and target applications of the ExaQute project, with a focus on unsteady problems. A practical, general method for the optimisation of the conditional value at risk is proposed. Three different optimisation problems are described: an oscillator problem selected as a suitable trial and illustration case; the shape optimisation of an airfoil, chosen as a benchmark application in the project; the shape optimisation of a tall building, which is the challenging target application set for ExaQUte. Fo
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Michalski, A,, D. Andersson, R. Rossi, and C. Soriano. D7.1 DELIVERY OF GEOMETRY AND COMPUTATIONAL MODEL. Scipedia, 2021. http://dx.doi.org/10.23967/exaqute.2021.2.020.

Повний текст джерела
Анотація:
This document describes the industrial application, on which the developments of the project are implemented, and the CFD set-up. The developments are implemented over six analysis cases with increasing complexity starting from a 2D geometry with mean wind inflow to a 3D geometry with turbulent inflow and real-time shape optimization. The application represents the CAARC tall building model, which has served as a benchmark model for many studies since the 1970’s when it was first developed. Base moments (bending and torsional moments) of the building are extracted for validation by comparison
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Badia, S., A. Martín, J. Principe, C. Soriano, and R. Rossi. D3.1 Report on nonlinear domain decomposition preconditioners and release of the solvers. Scipedia, 2021. http://dx.doi.org/10.23967/exaqute.2021.2.021.

Повний текст джерела
Анотація:
This document describes the industrial application, on which the developments of the project are implemented, and the CFD set-up. The developments are implemented over six analysis cases with increasing complexity starting from a 2D geometry with mean wind inflow to a 3D geometry with turbulent inflow and real-time shape optimization. The application represents the CAARC tall building model, which has served as a benchmark model for many studies since the 1970’s when it was first developed. Base moments (bending and torsional moments) of the building are extracted for validation by comparison
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Mueller, André, Adrien Detges, Benjamin Pohl, et al. Climate change, water and future cooperation and development in the Euphrates-Tigris basin. Adelphi research gemeinnützige GmbH, 2021. http://dx.doi.org/10.55317/casc017.

Повний текст джерела
Анотація:
The study focuses on three different risks that are affected through climate-related water challenges: (1) livelihoods and food security, (2) political stability and violence, and (3) interstate conflict and cooperation. Drawing on a review of existing literature and publicly available data, expert interviews, and scenario-building workshops, it identifies social, economic, institutional, and political factors that will shape the future vulnerability and resilience to the effects of global warming. Based on an assessment of current interventions, it derives recommendations for adaptation measu
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Nobile, F., Q. Ayoul-Guilmard, S. Ganesh, et al. D6.5 Report on stochastic optimisation for wind engineering. Scipedia, 2022. http://dx.doi.org/10.23967/exaqute.2022.3.04.

Повний текст джерела
Анотація:
This report presents the latest methods of optimisation under uncertainties investigated in the ExaQUte project, and their applications to problems related to civil and wind engineering. The measure of risk throughout the report is the conditional value at risk. First, the reference method is presented: the derivation of sensitivities of the risk measure; their accurate computation; and lastly, a practical optimisation algorithm with adaptive statistical estimation. Second, this method is directly applied to a nonlinear relaxation oscillator (FitzHugh–Nagumo model) with numerical experiments t
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Rabellotti, Roberta, and Elisa Conz. Mainstreaming the Cluster Approach in the Caribbean Region: The CCPF Cluster Capacity Building Initiative. Inter-American Development Bank, 2023. http://dx.doi.org/10.18235/0004771.

Повний текст джерела
Анотація:
In the Caribbean region, clusters hold tremendous potential because of the predominance of small and micro enterprises, their weak link in value chains and the scarcity of specialized inputs. The Compete Caribbean Partnership Facility (CCPF) has backed a capacity-building campaign for the cluster approach with the aim of mainstreaming cluster interventions in the region. This report explores how the process of mainstreaming is taking shape among those business support organizations (BSOs) involved in the CCPF project, currently involved in the implementation of cluster projects. The study addr
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Shape of building" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії