Увійти

Готові списки джерел за темами / Spline grooves / Статті в журналах

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Spline grooves.

Статті в журналах з теми "Spline grooves"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Spline grooves".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Kozlov, V. B., A. B. Istomin, and I. N. Gemba. "Repair and restoration of shafts, couplings, splined and keyed joints." Glavnyj mekhanik (Chief Mechanic), no. 7 (June 11, 2021): 32–42. http://dx.doi.org/10.33920/pro-2-2107-03.

Повний текст джерела

Анотація:

The article provides an overview of the methods of restoration and repair of various parts of the equipment: shafts, couplings, splined and keyed joints. Recommendations on the choice of methods, equipment and tools are given. In case of wear, the keyway is repaired by welding the face with subsequent milling. At the same time, the keyway size set by the standard is maintained. Such repairs are also possible: the keyway is expanded and deepened, completely eliminating the traces of wear, after which a stepped key is made to it. However, with such repairs, a high-quality connection is not provi

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Shrinivas, Vijay, and Thillairajan Arumugam. "Failure Analysis of AISI H13 Shafts Used in Twin Screw Extruders during Fluoropolymer Compounding." Solid State Phenomena 345 (July 28, 2023): 193–99. http://dx.doi.org/10.4028/p-2j16od.

Повний текст джерела

Анотація:

AISI H13 material finds wide use as screw shafts and screw elements in Twin Screw Extruders for Polymer Compounding applications owing to its high strength, excellent thermal shock resistance, high wear resistance and good fatigue strength. However, two AISI H13 shafts used in the Twin Screw Extruder supplied for fluoropolymer application experienced breakage after two years of service. Visual examination of broken shafts revealed deposits of processing material, rust marks and grooves at multiple locations on the shaft spline at the element to element butting zone. The location of breakage of

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Ohrimenko, Oleksandr, Julia Glavcheva, Olena Starchenko, Vitaly Fedorenko, and Hong Fu. "FEATURES OF EXISTING CONSTRUCTION TYPES OF CONNECTIONS FOR TORQUE TRANSMISSION." Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry, no. 1(7) (September 20, 2023): 22–28. http://dx.doi.org/10.20998/2079-004x.2023.1(7).03.

Повний текст джерела

Анотація:

The main goal of modern mechanical engineering is the production of high-quality products with minimal capital investments and as little time as possible, which at the same time is accompanied by a constant increase in the complexity of the geometric shapes of parts and their accuracy, high requirements for mating surfaces and their properties, the performance of assembly products and their operating conditions. Elements of splined and splined joints make up a significant share of machine-building products among a wide variety of other products. There is a significant group of plug connections

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Chen, Junying, Boxuan Wang, Xiuyu Chen, et al. "A Micro-Topography Measurement and Compensation Method for the Key Component Surface Based on White-Light Interferometry." Sensors 23, no. 19 (2023): 8307. http://dx.doi.org/10.3390/s23198307.

Повний текст джерела

Анотація:

The grinding grooves of material removal machining and the residues of a machining tool on the key component surface cause surface stress concentration. Thus, it is critical to carry out precise measurements on the key component surface to evaluate the stress concentration. Based on white-light interferometry (WLI), we studied the measurement distortion caused by the reflected light from the steep side of the grinding groove being unable to return to the optical system for imaging. A threshold value was set to eliminate the distorted measurement points, and the cubic spline algorithm was used

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Tian, Zaihao, Jin-Kui Ma, Lu Changhou, and Shu-Jiang Chen. "Optimization of texture geometry for a rotating ring to maximum load-carrying capacity." Industrial Lubrication and Tribology 71, no. 5 (2019): 657–63. http://dx.doi.org/10.1108/ilt-01-2019-0028.

Повний текст джерела

Анотація:

Purpose The purpose of this paper is to maximize the load-carrying capacity (LCC) of a rotating ring, a numerical model optimizing both the surface and bottom shape of its surface textures is proposed. Design/methodology/approach The Reynolds equation is used to evaluate the film pressure and LCC obtained by integrating the film pressure is set as the objective function. Around the center of the computational domain, radial lines with an equal angle between adjacent ones are produced and the surface contour of textures is obtained by connecting the endpoints using a spline curve. The bottom pr

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Zhang, Yi, Shaojie Wu, and Fangjie Cheng. "Automatic Adaptive Weld Seam Width Control Method for Long-Distance Pipeline Ring Welds." Sensors 25, no. 8 (2025): 2483. https://doi.org/10.3390/s25082483.

Повний текст джерела

Анотація:

In pipeline all-position welding processes, laser scanning provides critical geometric data of width-changing bevel morphology for welding torch swing control, yet conventional second-order derivative zero methods often yield pseudo-inflection points in practical applications. To address this, a third-order derivative weighted average threshold algorithm was developed, integrating image denoising, enhancement, and segmentation pre-processing with cubic spline fitting for precise bevel contour reconstruction. Bevel pixel points were captured by the laser sensor as inputs through the extracted s

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Trung, Do Duc, and Le Dang Ha. "Research on selection of abrasive grain size and cutting parameters when grinding of interrupted surface using aluminum oxide grinding wheel with ceramic binder." EUREKA: Physics and Engineering, no. 1 (January 10, 2022): 93–102. http://dx.doi.org/10.21303/2461-4262.2022.002058.

Повний текст джерела

Анотація:

In this article, a study on intermittent surface grinding using aluminum oxide grinding wheel with ceramic binder is presented. The testing material is 20XH3A steel (GOST standard – Russian Federation). The testing sample has been sawn 6 grooves, with the width of each groove of 10 mm, the grooves are evenly distributed on the circumference of sample. The testing sample resembles a splined shaft. An experimental matrix of nine experiments has been built by Taguchi method, in which abrasive grain size, workpiece speed, feed rate and depth of cut were selected as input variables. At each experim

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Trung, Do Duc, and Le Dang Ha. "Research on selection of abrasive grain size and cutting parameters when grinding of interrupted surface using aluminum oxide grinding wheel with ceramic binder." EUREKA: Physics and Engineering, no. 1 (January 10, 2022): 93–102. https://doi.org/10.21303/2461-4262.2022.002058.

Повний текст джерела

Анотація:

In this article, a study on intermittent surface grinding using aluminum oxide grinding wheel with ceramic binder is presented. The testing material is 20XH3A steel (GOST standard – Russian Federation). The testing sample has been sawn 6 grooves, with the width of each groove of 10 mm, the grooves are evenly distributed on the circumference of sample. The testing sample resembles a splined shaft. An experimental matrix of nine experiments has been built by Taguchi method, in which abrasive grain size, workpiece speed, feed rate and depth of cut were selected as input variables. At each experim

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Shaw, Sean M., Kimberly Stillmaker, and Amit M. Kanvinde. "Seismic Response of Partial-Joint-Penetration Welded Column Splices in Moment-Resisting Frames." Engineering Journal 52, no. 2 (2015): 87–108. http://dx.doi.org/10.62913/engj.v52i2.1082.

Повний текст джерела

Анотація:

Current standards require that welded column splice connections in special or intermediate moment resisting frames (SMRFs or IMRFs) feature complete-joint-penetration (CJP) groove welds to develop the full flexural strength of the column. CJP welds are often costly, requiring additional material, inspection and labor. Compared to beam-to-column connections, column splices have modest deformation demands. This suggests that perhaps with modern, toughness-rated weld filler materials and welding practices, PJP welded splices may offer acceptable performance under seismic loads. A study featuring

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Lyashuk, O., Y. Pyndus, I. Lutsiv, et al. "Fracture cause analysis of the extruder’s shaft and geometry optimization of the spline." Journal of Mechanical Engineering and Sciences 13, no. 1 (2019): 4449–60. http://dx.doi.org/10.15282/jmes.13.1.2019.08.0378.

Повний текст джерела

Анотація:

The article is devoted to increasing of the durability of technological equipment elements, forecasting of the resource and diagnostics of failures of the technical system. The basic regularities are analyzed and causes of the failure of the extruder’s working body shaft are determined. For torque values M = 40.74 - 64.37 N·m and of the extruder’s working body shaft, the stress-strain state of the contact surfaces of the keyhole of the extruder’s shaft is calculated by the method of three-dimensional finite element modelling. The maximum values of the stress intensity σint(max), which arise on

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Hu, Ji Bin, Wen Jin Tao, Yi Min Zhao, and Chao Wei. "Numerical Analysis of General Groove Geometry for Dry Gas Seals." Applied Mechanics and Materials 457-458 (October 2013): 544–51. http://dx.doi.org/10.4028/www.scientific.net/amm.457-458.544.

Повний текст джерела

Анотація:

By Changing the key points on the spiral curve, general groove geometry was determined. Considering the simplicity of modeling and analysis, cubic spline function was used to express the general groove profile. By using the boundary fitted coordinate system transformation, irregular computational domain was transferred to regular region; Based on flow conservation principle, finite volume method was applied to discrete compressible Reynolds equation; By the application of Newton-Raphson iteration method for solving algebraic equation, numerical model of general groove dry gas seals was establi

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Wang, Jian Hua, and Gang Zhang. "Rectangle Spline Hob Error Analysis of Tooth Profile." Advanced Materials Research 411 (November 2011): 222–26. http://dx.doi.org/10.4028/www.scientific.net/amr.411.222.

Повний текст джерела

Анотація:

This paper introduces a method for solving theoretical curve of rectangle spline hob by using the analytic method. The tooth profile and tooth profile envelope diagram have been simulated by using Matlab software, and the effects of numbers of hob cutting edges on the workpiece edges degrees errors has been analysed. Simulation results show that this method can select a reasonable number of groove according to the requirements of target accuracy, which can improve the design accuracy and design efficiency of the hob.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Wu, Zhen Yu, Fang Yuan Tian, and Xu Dong Hu. "Effect of Groove on Performance of Splicing Fiber in Air Splicer." Advanced Materials Research 332-334 (September 2011): 1374–77. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.1374.

Повний текст джерела

Анотація:

The purpose of this study is to examine the validity of groove in enhancing performance of splicing fiber in air splicer. A groove is usually used to improve the condition of internal flow, reduce the internal pressure and so on. In this paper, a two-parameter numerical mathematic model was developed and calculated in two configurations (chamber with groove and chamber without groove). The strength of the fibers was measured which were got from the air splicer with two different configuration. The result of simulation and experimental shows that: with the increase of inlet pressure, the rotati

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Chen, Chang Liang, Sheng Sun Hu, and Dong Lin He. "Trajectory Model of J-Type Groove and its Curve Fitting of B-Spline." Applied Mechanics and Materials 58-60 (June 2011): 1396–401. http://dx.doi.org/10.4028/www.scientific.net/amm.58-60.1396.

Повний текст джерела

Анотація:

This paper describes the complexity and particularity of the trajectory of tube-sphere intersection and derives mathematical model of the track; according to characteristics of B-Spline curve, the track intersecting curve is partitioned ,and determine the mathematical relationship between the control points (deBoor point) and the data points of J-type groove; using cubic non-uniform irrational B-Spline theory, generate segments of approximation curves, then first and last point of each segment are constrained, so that combination curves can be seen as a whole curve with C1continuity; programmi

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Lee, Seung-Jae, Tae-Sung Eom, Su-Min Kang, Dae-Jin Kim, and Seung-Il Kim. "Behavior of Midspan Splice Joints with Groove for Precast Concrete Beams." Journal of the Korea Concrete Institute 32, no. 6 (2020): 565–74. http://dx.doi.org/10.4334/jkci.2020.32.6.565.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Xuan, Guantao, Yuanyuan Shao, and Lei Liu. "Optimal Design of Grooved Cam Profile Using Non-uniform Rational B-splines." MATEC Web of Conferences 139 (2017): 00047. http://dx.doi.org/10.1051/matecconf/201713900047.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Li, Xiaoyang, Jiarui Chen, Shengjia Wang, Yongjun Liu, and Tao Geng. "An S-Shaped Core M-Z Interferometer Induced by Arc-Discharging for Strain Sensing." Photonics 11, no. 9 (2024): 816. http://dx.doi.org/10.3390/photonics11090816.

Повний текст джерела

Анотація:

In this study, a kind of in-fiber Mach–Zehnder interferometer (MZI) is designed and experimentally examined. The MZI is composed of two in-fiber S-shaped cores (SSCs), which enhance strain sensitivity. To prepare the SSCs, a high-frequency CO2 laser is first utilized to polish grooves on the symmetrical surface of a single-mode fiber (SMF). The polished area is then subjected to arc-discharging by a commercial fusion splicer, and the core of the fiber bends towards the polished grooves due to the self-roundness of the cladding and the heating effect of discharge. The results of the experiments

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Wang, Tie, Fu Qiang Zhao, and Jun Shen. "Failure Analysis of Transmission Gear for Heavy Vehicles." Applied Mechanics and Materials 86 (August 2011): 206–9. http://dx.doi.org/10.4028/www.scientific.net/amm.86.206.

Повний текст джерела

Анотація:

For early failure problems, which are broken teeth of the first transmission driving gear in the test, this paper studies the problem in the failure mechanisms such as chemical composition analysis, fracture surface analysis as well as the metallographic structure morphology inspection analysis of failure gear. The results show that the main reasons causing abnormal fracture of the failure gear are the insufficient root shot peening strengthening, the small fillet of the spline groove and the inadequate rim thickness of the rim. This paper uses the finite element method to analyse the contact

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Wu, Zhenyu, Binghai Chen, Zhong Xiang, and Xudong Hu. "The effect of groove structure on performance of pneumatic spliced joint." Journal of The Textile Institute 109, no. 7 (2017): 903–13. http://dx.doi.org/10.1080/00405000.2017.1383652.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Li, Guo Chang. "Research on Roll Bending Forming Dynamic Linked List Model and Intelligence Deformation Analysis." Applied Mechanics and Materials 215-216 (November 2012): 857–60. http://dx.doi.org/10.4028/www.scientific.net/amm.215-216.857.

Повний текст джерела

Анотація:

Aiming at the actual cold bending forming rolling process, in order to make more accurate analyses to stress and strain, the paper mentioned dynamic link model of rolling process, and based on the spline finite method , using the model to study the deformation analysis method of node and link in actual roll forming process, giving the holey stress and strain mathematics description type of link structure node, and on this basis intelligent node structure is given. Set up corresponding Agent for each node or link, establish knowledge rules for each Agent, realize a new method making use of link

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Ku, Tae-Wan. "A Combined Cold Extrusion for a Drive Shaft: A Parametric Study on Tool Geometry." Materials 13, no. 10 (2020): 2244. http://dx.doi.org/10.3390/ma13102244.

Повний текст джерела

Анотація:

Parametric investigations related to shoulder angle on tool geometry for a combined cold extrusion of a drive shaft, which consisted of spur gear and internal spline structures, were conducted through three-dimensional FE (finite element) simulations. The drive shaft was required to be about 92.00 mm for the face width of the top land on the spur gear part and roughly 22.70 mm for the groove depth of the internal spline section. AISI 1035 carbon steel material with a diameter of 50.00 mm and a length of 121.00 mm was spheroidized and annealed, then used as the initial billet material. A prefor

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Sun, Litao, Youngzee Song, David Blocquel, Xiang-Lei Yang, and Paul Schimmel. "Two crystal structures reveal design for repurposing the C-Ala domain of human AlaRS." Proceedings of the National Academy of Sciences 113, no. 50 (2016): 14300–14305. http://dx.doi.org/10.1073/pnas.1617316113.

Повний текст джерела

Анотація:

The 20 aminoacyl tRNA synthetases (aaRSs) couple each amino acid to their cognate tRNAs. During evolution, 19 aaRSs expanded by acquiring novel noncatalytic appended domains, which are absent from bacteria and many lower eukaryotes but confer extracellular and nuclear functions in higher organisms. AlaRS is the single exception, with an appended C-terminal domain (C-Ala) that is conserved from prokaryotes to humans but with a wide sequence divergence. In human cells, C-Ala is also a splice variant of AlaRS. Crystal structures of two forms of human C-Ala, and small-angle X-ray scattering of Ala

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Li, Xinyao, and Liangli He. "Shape Optimization Design for a Centrifuge Structure with Multi Topological Configurations Based on the B-Spline FCM and GCMMA." Applied Sciences 10, no. 2 (2020): 620. http://dx.doi.org/10.3390/app10020620.

Повний текст джерела

Анотація:

The geotechnical centrifuge applied in various geotechnical engineering fields provides physical data for investigating mechanisms of deformation and failure and for validating analytical and numerical methods by simulating and studying the geotechnical problems. The basket, as one of the important components used to place the inspection model of centrifugal test, is designed to withstand complex loads. This paper presents an optimization design method for the basket based on the weighted B-Spline Finite Cell Method (FCM) and the globally-convergent method of moving asymptotes (GCMMA). In orde

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Frinces, Hefson D., and Fahroni C. Winata. "Peroneal Tendon Dislocation Treated with Arthroscopic Approach: A Case Report." Orthopaedic Journal of Sports Medicine 11, no. 2_suppl (2023): 2325967121S0088. http://dx.doi.org/10.1177/2325967121s00885.

Повний текст джерела

Анотація:

Peroneal tendon dislocation is usually manifested as ankle instability and pain. Peroneal tendon dislocation is caused by ruptured of superior peroneal retinaculum (SPR) due to anatomical abnormality. SPR can be damaged due to excessive contraction force of dorsiflexion of the foot. The epidemiology of this pathology is also uncertain, because peroneal tendon dislocation is often mistaken for lateral ankle ligament sprain. The treatment should include conservative treatment and surgical treatment if it fails. A 20-year-old Indonesian Male attended orthopedic consultation with pain and snapping

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Qin, Hong Wu, Qi Tang Wang, Wen Hua Yang, Zheng Sheng Li, and Ren He. "Research on Structural Analysis of Steering Based on Thermal-Structure." Applied Mechanics and Materials 217-219 (November 2012): 2510–18. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.2510.

Повний текст джерела

Анотація:

Stiffness and strength of the electric power steering structure were analyzed based on Catia, HyperMesh and ANSYS. Then, the influence of temperature on the stiffness of every component was also studied. The results indicate that the maximum deformations of the worm and worm wheel occur in the centre of the tooth top and their shape approximate ellipse. The deformation of the tail end of the worm-wheel shaft is large, and the limited groove area contracting the splined shaft and the steel ball bears large stress. The temperature load has some impact on the stress and deformation of components.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Yang, Yuxin, Juan Hu, Xinguang Ning, et al. "Structure Effects on Mechanical Properties of a Novel Engineered Wood Product: Cross-Laminated-Thick Veneers Based on Infinite Splicing Technology." Forests 16, no. 1 (2025): 181. https://doi.org/10.3390/f16010181.

Повний текст джерела

Анотація:

With increasing global concern over carbon emissions in the construction industry, cross-laminated-thick veneer (CLTV) has emerged as an innovative green building material with significant potential to promote the achievement of “dual-carbon” goals. This study developed a groove and tenon splicing technique for thick veneers, enabling infinite splicing of the length direction and the preparation of a large-size CLTV measuring 12 m (length) × 3.25 m (width) × 105 mm (thickness). The mechanical properties of CLTV were studied in relation to splice position, assembly pattern of grain directions,

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Zhang, Feng, Jiyuan Ke, Li Zhang, et al. "Structural insights into alternative splicing-mediated desensitization of jasmonate signaling." Proceedings of the National Academy of Sciences 114, no. 7 (2017): 1720–25. http://dx.doi.org/10.1073/pnas.1616938114.

Повний текст джерела

Анотація:

Jasmonate ZIM-domain (JAZ) transcriptional repressors play a key role in regulating jasmonate (JA) signaling in plants. Below a threshold concentration of jasmonoyl isoleucine (JA-Ile), the active form of JA, the C-terminal Jas motif of JAZ proteins binds MYC transcription factors to repress JA signaling. With increasing JA-Ile concentration, the Jas motif binds to JA-Ile and the COI1 subunit of the SCFCOI1 E3 ligase, which mediates ubiquitination and proteasomal degradation of JAZ repressors, resulting in derepression of MYC transcription factors. JA signaling subsequently becomes desensitize

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Ranković, Slobodan, Andrija Zorić, Todor Vacev, and Žarko Petrović. "Numerical Analysis of an Innovative Double-Strap Joint for the Splicing of Near-Surface Mounted Fiber-Reinforced Polymer Bars for Reinforced Concrete Beam Strengthening." Applied Sciences 13, no. 22 (2023): 12387. http://dx.doi.org/10.3390/app132212387.

Повний текст джерела

Анотація:

The issue of the cut-off splicing of an additional fiber-reinforced polymer (FRP) bar in the near-surface mounted (NSM) technique for reinforced concrete (RC) beam strengthening exposed dominantly to bending is insufficiently investigated. A possible solution of this issue is a new proposed technique: a double-strap joint. It implies the widening of the groove at the cut-off location and the symmetrical installing of additional supplements of FRP reinforcement. In this research, beam strength has been determined for the following cases: additional NSM FRP reinforcement without a cut-off, with

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Sherman, L. A., and A. M. Lara. "Unrestricted recognition of a nonpeptide antigen by CD8+ cytolytic T lymphocytes." Journal of Immunology 143, no. 11 (1989): 3444–47. http://dx.doi.org/10.4049/jimmunol.143.11.3444.

Повний текст джерела

Анотація:

Abstract CD8+ murine CTL that are specific for an unusual nonpeptide Ag, the heme moiety of hemoglobin, have been derived by in vitro stimulation of spleen cells with hemin. Such CTL demonstrate a requirement for the expression of class I Ag on target cells, yet appear to be unrestricted to the extent that both syngeneic and allogeneic targets precoated with hemin are sensitive to lysis. A series of CTL clones with specificity for hemin was derived from C57BL/6 mice. They exhibited the same type of promiscuous recognition that was observed in CTL populations from a number of different strains.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Weng, Peter J., Yang Gao, Mark T. Gregory, Pengcheng Wang, Yinsheng Wang та Wei Yang. "Bypassing a 8,5′-cyclo-2′-deoxyadenosine lesion by human DNA polymerase η at atomic resolution". Proceedings of the National Academy of Sciences 115, № 42 (2018): 10660–65. http://dx.doi.org/10.1073/pnas.1812856115.

Повний текст джерела

Анотація:

Oxidatively induced DNA lesions 8,5′-cyclopurine-2′-deoxynucleosides (cdPus) are prevalent and cytotoxic by impeding DNA replication and transcription. Both the 5′R- and 5′S-diastereomers of cdPu can be removed by nucleotide excision repair; however, the 5′S-cdPu is more resistant to repair than the 5′R counterpart. Here, we report the crystal structures of human polymerase (Pol) η bypassing 5′S-8,5′-cyclo-2′-deoxyadenosine (cdA) in insertion and the following two extension steps. The cdA-containing DNA structures vary in response to the protein environment. Supported by the “molecular splint”

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Huang, W., and M. G. Bayerl. "Indeterminate Dendritic Cell Tumor (IDCT) of GI Tract, Lymph Node and Spleen Masquerading as Refractory Inflammatory Bowel Disease." American Journal of Clinical Pathology 154, Supplement_1 (2020): S108. http://dx.doi.org/10.1093/ajcp/aqaa161.236.

Повний текст джерела

Анотація:

Abstract Introduction/Objective Indeterminate dendritic cell tumor (IDCT) is an extremely rare neoplasm, most frequently presenting in skin with cells resembling precursors to Langerhans cells. We report an exceptional case of IDCT occurring in GI tract, spleen, and lymph nodes of a 66-year-old lady, mimicking inflammatory bowel disease (IBD). Methods Four years prior to the diagnosis of IDCT, she was diagnosed with ulcerative colitis (UC) based on bloody diarrhea and pan-colitis. Her colitis became refractory to medical treatments and she developed pancytopenia, splenomegaly and abdominal lym

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Liu, Quan Hong, and Hu Ran Liu. "Surface-Surface Contact in 5-Axis NC Machining of Sculptured Surfaces Using Anural Cutter." Applied Mechanics and Materials 37-38 (November 2010): 1376–79. http://dx.doi.org/10.4028/www.scientific.net/amm.37-38.1376.

Повний текст джерела

Анотація:

Sculptured surface are used in a wide variety of applications in the automotive, aerospace and ship building industries, such as turbine blades, impeller and marine propellers. The original design concept is often embodied in a physical model, perhaps sculpted from clay by a skilled artisan, from which measurement data is scanned. Surfaces are fitted to the scanned data, and a mathematically precise description is then available for subsequent steps in the product-design process. Parametric forms such as the well known Bezier, B-spline and NURBS type usually mathematically define the surfaces.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Brockenbrough, Roger L. "MTR Survey of Plate Material Used in Structural Fabrication." Engineering Journal 40, no. 1 (2003): 42–49. http://dx.doi.org/10.62913/engj.v40i1.797.

Повний текст джерела

Анотація:

A statistical survey was made for a broad sample of mill test reports (MTR) of plate grades typically used in building construction including A36, A572, A588, A852, and A514 steels. Tensile properties, impact properties, and chemical compositions were analyzed. The tensile statistics agreed with assumptions made in the development of the AISC Load and Resistance Factor Design Specification for Structural Steel Buildings (LRFD Specification) (AISC, 1999). The yield-tensile ratios varied from 0.61 to 0.94, following the typical trend of increasing yield-tensile ratio with increasing strength lev

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Zhu, Jiacheng, Zhicheng Zhao, Quan Liu, et al. "Geostationary Full-Spectrum Wide-Swath High-Fidelity Imaging Spectrometer: Optical Design and Prototype Development." Remote Sensing 15, no. 2 (2023): 396. http://dx.doi.org/10.3390/rs15020396.

Повний текст джерела

Анотація:

The optical system of an imaging spectrometer working on a geostationary earth orbit (GEO) covering a full optical spectrum of 0.3–12.5 μm is analyzed and designed. It enables a ground coverage of 400 × 400 km by internal scanning and achieves a high spatial resolution of 25 m. The full spectrum is divided into five sub-bands, and each band adopts four spectrometers to splice in the field of view to achieve the ultra-long slit required by the wide swath. The total length of the slit is up to 241.3 mm. This paper focuses on compact spectrometers with long slits that can meet the splicing requir

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Wang, Y. S., and D. L. Perkins. "Characterization of autoreactive T cells. Relative importance of self-peptides versus MHC." Journal of Immunology 147, no. 3 (1991): 804–9. http://dx.doi.org/10.4049/jimmunol.147.3.804.

Повний текст джерела

Анотація:

Abstract The degree to which processed self-peptides contribute to the stimulation of autoreactive T cells has not been determined. In this study we have analyzed a panel of autoreactive T cell hybridomas from normal C57BL/26 mice produced by fusing peripheral lymph node cells with a variant of the BW5147 thymoma line, which does not express endogenous TCR alpha- and beta-chains. All of the autoreactive hybridomas responded to spleen cells expressing the syngeneic I-Ab allele, but not to allogeneic spleen cells. Although all hybridomas were I-Ab restricted, they demonstrated different patterns

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Miller, Rebecca, Farshid Abbasi, and Javad Mohammadpour. "Power line robotic device for overhead line inspection and maintenance." Industrial Robot: An International Journal 44, no. 1 (2017): 75–84. http://dx.doi.org/10.1108/ir-06-2016-0165.

Повний текст джерела

Анотація:

Purpose This paper aims to focus on the design and testing of a robotic device for power line inspection and cleaning. The focus for this design is on simplicity and compactness with a goal to create a device for linemen and other power line workers to keep in their toolbox. Design/methodology/approach The prototype uses V-grooved wheels to grip the line and can pass obstacles such as splices. It is equipped with a video camera to aid in line inspection and a scrub brush to clean debris from the line. The operator controls the device remotely from a laptop through a wireless connection. The no

Стилі APA, Harvard, Vancouver, ISO та ін.

37

HUANG, Yunchuan, Zhencidan DAN, Yongxin ZHAO, Maozhou WANG, and Jiaqi CHEN. "Characteristics and Geological Significance of Middle and Late Triassic Bivalve Fossils in Ali Zada County,Tibet." Chinese Earth Sciences Review 3, no. 4 (2024): 207–14. https://doi.org/10.48014/cesr.20241104002.

Повний текст джерела

Анотація:

Zada County is located in the Zada Basin in the southwest part of the Tibetan Plateau, which is located between the Himalayan Mountains and the Ayira Mountains. The Zada Basin is generally distributed in a NORtheast-to-southwest direction, which is consistent with the northeast-to-southeast tectonic line of the western Himalayan region. It belongs to the tectonic movement product of the collision, subduction and splice convergence of the Indian plate and the Eurasian plate at the end of the Cretaceous period. The structural form. and structure pattern are relatively complex. The basement strat

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Fisher, John W. "Evolution of Fatigue-Resistant Steel Bridges." Transportation Research Record: Journal of the Transportation Research Board 1594, no. 1 (1997): 5–17. http://dx.doi.org/10.3141/1594-01.

Повний текст джерела

Анотація:

Fatigue cracking was seldom found in welded highway and railroad bridges from the time of their introduction in the 1950s until the late 1960s. The fatigue design specifications used in that era were developed from a limited knowledge base and largely with small-scale specimens that simulated welded details. During the AASHO Road Test in 1960 fatigue cracks were observed to develop in cover-plated steel bridge beams as a result of the heavy loads and high stress ranges. This observation subsequently resulted in a series of experimental studies supported by NCHRP starting in 1967. The laborator

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Schilperoort, Bart, César Jiménez Rodríguez, Bas van de Wiel, and Miriam Coenders-Gerrits. "A distributed-temperature-sensing-based soil temperature profiler." Geoscientific Instrumentation, Methods and Data Systems 13, no. 1 (2024): 85–95. http://dx.doi.org/10.5194/gi-13-85-2024.

Повний текст джерела

Анотація:

Abstract. Storage change in heat in the soil is one of the main components of the energy balance and is essential in studying the land–atmosphere heat exchange. However, its measurement proves to be difficult due to (vertical) soil heterogeneity and sensors easily disturbing the soil. Improvements in the precision and resolution of distributed temperature sensing (DTS) equipment has resulted in its widespread use in geoscientific studies. Multiple studies have shown the added value of spatially distributed measurements of soil temperature and soil heat flux. However, due to the spatial resolut

Стилі APA, Harvard, Vancouver, ISO та ін.

40

McCutcheon, J. A., J. Gumperz, K. D. Smith, C. T. Lutz, and P. Parham. "Low HLA-C expression at cell surfaces correlates with increased turnover of heavy chain mRNA." Journal of Experimental Medicine 181, no. 6 (1995): 2085–95. http://dx.doi.org/10.1084/jem.181.6.2085.

Повний текст джерела

Анотація:

In comparison with HLA-A and -B, the protein products of the HLA-C locus are poorly characterized, in part because of their low level of expression at the cell surface. Here, we examine how protein-protein interactions during assembly and regulation of the mRNA level affect cell surface expression of HLA-C. We find that intrinsic properties of the HLA-C heavy chain proteins do not correlate with low cell surface expression: HLA-C heavy chains associate and dissociate with beta 2-microglobulin (beta 2m) at rates comparable to those found for HLA-A and -B, and increased competition for beta 2m d

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Braun, Ueli, and Manfred Götz. "Ultrasonography of the reticulum in cows." American Journal of Veterinary Research 55, no. 3 (1994): 325–32. http://dx.doi.org/10.2460/ajvr.1994.55.03.325.

Повний текст джерела

Анотація:

Summary The reticulum and adjacent organs were examined ultrasonographically in 51 cows by use of a 3.5- MHz linear transducer applied to the ventral aspect of the thorax over the sixth and seventh intercostal spaces. Examination included assessment of the contour of the reticulum, of reticular contractions, and of the organs adjacent to the reticulum. The normal reticulum appeared as a half-moon shaped structure with a smooth contour; it contracted at regular intervals and was situated immediately adjacent to the diaphragm and ventral portion of the abdominal wall when relaxed. Contents of th

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Neelam, Sinha, Kumar Sharma Sanjay, and Prasad Rashmi. "An Observational Study to Examine Changes in Gross Morphology and Histological Architecture in Cadaveric Liver Specimens." International Journal of Pharmaceutical and Clinical Research 13, no. 5 (2021): 473–80. https://doi.org/10.5281/zenodo.14225732.

Повний текст джерела

Анотація:

<strong>Aim:</strong> An observational study to examine changes in gross morphology and histological architecture in cadaveric liver specimens. <strong>Methods: </strong>The cross-sectional descriptive study was done in the Department of Anatomy, Nalanda Medical College, Patna, Bihar, India, for 1 year. All embalmed cadavers and preserved livers were included with exclusion of livers that had destructed surface by using purposive sampling technique. Therefore, the total samples were 50 cadavers and preserved livers. <strong>Results:</strong> Among the total 50 studied

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Newman, B. A., and E. A. Kabat. "An immunochemical study of the combining site specificities of C57BL/6J monoclonal antibodies to alpha (1----6)-linked dextran B512." Journal of Immunology 135, no. 2 (1985): 1220–31. http://dx.doi.org/10.4049/jimmunol.135.2.1220.

Повний текст джерела

Анотація:

Abstract This is the first report of an immunochemical study of the combining site specificities of a set of monoclonal antibodies to dextran B512 from C57BL/6J mice. The results confirm previous observations on antidextran combining sites and reveal specificities not seen earlier extending the observed repertoire of antibody combining sites to the single alpha (1----6)-linked glucosyl antigenic determinant. Eight C57BL/6J anti-dextran B512 hybridomas, four IgM,kappa and four IgA,kappa, were produced by PEG fusion of immune spleen cells with the nonproducer myeloma cell line P3X63Ag8 6.5.3. An

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Ravindranath, Mepur H., Narendranath M. Ravindranath, Senthamil R. Selvan, Fatiha El Hilali, Carly J. Amato-Menker, and Edward J. Filippone. "Cell Surface B2m-Free Human Leukocyte Antigen (HLA) Monomers and Dimers: Are They Neo-HLA Class and Proto-HLA?" Biomolecules 13, no. 8 (2023): 1178. http://dx.doi.org/10.3390/biom13081178.

Повний текст джерела

Анотація:

Cell surface HLA-I molecules (Face-1) consist of a polypeptide heavy chain (HC) with two groove domains (G domain) and one constant domain (C-domain) as well as a light chain, B2-microglobulin (B2m). However, HCs can also independently emerge unfolded on the cell surface without peptides as B2m-free HC monomers (Face-2), B2m-free HC homodimers (Face 3), and B2m-free HC heterodimers (Face-4). The transport of these HLA variants from ER to the cell surface was confirmed by antiviral antibiotics that arrest the release of newly synthesized proteins from the ER. Face-2 occurs at low levels on the

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Young, Ken H., Nancy Patten, Sim Truong, et al. "Clinical Impact of TP53 Gene Mutations in Diffuse Large B-Cell Lymphoma (DLBCL): An International DLBCL Rituxan-CHOP Consortium Program Study." Blood 114, no. 22 (2009): 967. http://dx.doi.org/10.1182/blood.v114.22.967.967.

Повний текст джерела

Анотація:

Abstract Abstract 967 Mutations of the TP53 tumor suppressor gene are associated with a poor clinical outcome in DLBCL patients treated with CHOP. The impact of TP53 mutations on clinical outcome of DLBCL patients treated with Rituxan-CHOP has not been comprehensively analyzed. The purpose of this study was to analyze the frequency and type of TP53 mutations in Rituxan-CHOP treated DLBCL patients from twenty-two medical centers, and to correlate these with clinical outcome. TP53 mutations were identified in 138/604 (22.7%) Rituxan-CHOP treated DLBCL cases and included missense (n=133), nonsens

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Hamdin, Candra Dwipayana, Dheni Cahyo, and Dandiko Galanova. "KETOKSIKAN AKUT ORAL ZAT PEWARNA MAKANAN DAUN JATI (Tectona grandis L. f.) PADA TIKUS WISTAR." Pro Food 3, no. 2 (2018): 240. http://dx.doi.org/10.29303/profood.v3i2.56.

Повний текст джерела

Анотація:

Jati leaf becomes one of the alternative natural food coloring in some food producers. A research is needed to determine the potential of acute ketoxicity (LD50) and determine the clinical symptoms that arise also to see the groos patologi of organs resulting from single oral dosage of jati leaf extract. This research was conducted with complete randomized design using OECD 423 method. The test animal used was Wistar strain female rats. In this study, the test animals were divided into 2 groups, namely the control and treatment groups, each consisting of 3 test animals. Control group given Na

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Norman, David B. "Scelidosaurus harrisonii from the Early Jurassic of Dorset, England: postcranial skeleton." Zoological Journal of the Linnean Society 189, no. 1 (2019): 47–157. http://dx.doi.org/10.1093/zoolinnean/zlz078.

Повний текст джерела

Анотація:

Abstract Scelidosaurus fossils were first discovered during the commercial quarrying of the Liassic sea-cliffs between Charmouth and Lyme Regis in Dorset during the late 1850s. The original specimens included a well-preserved skull embedded in a block of argillaceous limestone (marlstone). Shortly after this skull was retrieved, a series of more-or-less contiguous marlstone slabs were recovered, containing most of the skeleton of the same animal (NHMUK R1111). After rudimentary (hammer and chisel) mechanical preparation, Owen published descriptions of this material (Owen, 1861, 1863). These tw

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Yap, Eduardo C. "Principles of Structural Rhinoplasty in South East Asian Noses." Philippine Journal of Otolaryngology-Head and Neck Surgery 29, no. 2 (2014): 41–44. http://dx.doi.org/10.32412/pjohns.v29i2.437.

Повний текст джерела

Анотація:

What makes the majority of noses beautiful? It is the tip.1,2,3  South East Asian noses are usually small and short with bulbous tip and thick skin and soft tissue envelope (SSTE).2 The tip is determined by the shape and strength of the lower cartilages.2,3,4 The lower cartilages are usually soft and weak so there is a need for a strong support system for the attachment of the lower cartilages. Thus the surgical term is called “Structural Rhinoplasty.”2,3  The concept of the surgery involves re-structuring the tip to a new position for elongation and projection. Since t

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Ba, Dun, Juan Du, Mehdi Vahdati, Min Zhang, and Zhong-Gang Fan. "Design optimization of a hybrid casing treatment based on axial momentum budget analysis in the tip flow region." Physics of Fluids 36, no. 1 (2024). http://dx.doi.org/10.1063/5.0178234.

Повний текст джерела

Анотація:

In this paper, a novel slot–groove hybrid casing treatment is designed and optimized to improve the stall margin of a low-speed axial compressor. A combination of the axial slot and circumferential groove casing treatments is utilized to increase the stall margin without incurring efficiency loss. The slot meridional profile is described with 2 B-spline curves. Circumferential grooves are parametrically described with groove height and width. An in-house optimization design platform is constructed based on the nondominated sorting genetic algorithm II and Kriging surrogate model. The optimizat

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Hashimoto, Hiromu, and Masayuki Ochiai. "Optimization of Groove Geometry for Thrust Air Bearing to Maximize Bearing Stiffness." Journal of Tribology 130, no. 3 (2008). http://dx.doi.org/10.1115/1.2913546.

Повний текст джерела

Анотація:

Hydrodynamic gas film bearings are widely used for very-high-speed, lightly loaded rotating machinery. In the design of hydrodynamic gas film bearings, it is of cardinal importance to enhance the stiffness of gas films to minimize vibration due to external excitations. Among various types of hydrodynamic gas film thrust bearings, grooved bearings have an advantage of high stiffness and load-carrying capacity, but the stiffness of the bearings strongly depends on groove geometry. Therefore, when the groove geometry is suitably designed, it is expected to considerably improve the stability chara

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!