Увійти

Готові списки джерел за темами / Substrate Height

Зміст

Статті в журналах
Дисертації
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Substrate Height"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Substrate Height".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Substrate Height"

1

Casanovas Cosío, Enrique, Alexis Suárez del Villar Labastida, Nelson Valladares Enriquez, Dayani Quero Machado, and Reyna Reyes Reyes. "Producción de larvas de moscas (Musca domestica L.) con diferentes proporciones de cachaza y gallinaza." Revista Metropolitana de Ciencias Aplicadas 4, no. 1 (2021): 33–40. http://dx.doi.org/10.62452/rhwg2s44.

Повний текст джерела

Анотація:

The effect of the production of fly larvae in different substrates at different heights was evaluated. For this, a completely randomized bifactorial design was established with the following factors: Factor 1 – quantity of substrate (filter cake and hens manure, %), Factor 2 - height of the substrate in magenta (three and five, cm). A- 100 filter cake; B- 25% hens manure + 75% filter cake; C- 50% hens manure + 50% filter cake; D- 75% hens manure + 25% filter cake; E- 100% hens manure at three centimeters in height and E, F, G, H, I with the same proportions of substrates at five centimeters in

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Słupska, Monika, Ewa Syguła, Piotr Komarnicki, Wiesław Szulczewski, and Roman Stopa. "Simple Method for Apples’ Bruise Area Prediction." Materials 15, no. 1 (2021): 139. http://dx.doi.org/10.3390/ma15010139.

Повний текст джерела

Анотація:

From the producers’ point of view, there is no universal and quick method to predict bruise area when dropping an apple from a certain height onto a certain type of substrate. In this study the authors presented a very simple method to estimate bruise volume based on drop height and substrate material. Three varieties of apples were selected for the study: Idared, Golden Delicious, and Jonagold. Their weight, turgor, moisture, and sugar content were measured to determine morphological differences. In the next step, fruit bruise volumes were determined after a free fall test from a height of 10

Стилі APA, Harvard, Vancouver, ISO та ін.

3

DAVOUDOU, Pascaline Sènan, Gilbert ATINDOGBE, Florent Jean-Baptiste QUENUM, Paulin AZOKPOTA, and Jean Cossi GANGLO. "Germination et croissance en pépinière de Treculia africana Decne. var. africana : influence des prétraitements des graines et du substrat." Journal of Applied Biosciences 204 (January 31, 2025): 21600. https://doi.org/10.35759/jabs.205.1.

Повний текст джерела

Анотація:

RESUME Objectif : de cette étude était d’évaluer l’influence des méthodes de prétraitements sur la germination des graines de Treculia africana ( Arbre à pain d’Afrique) et la croissance de quelques plants en pépinière. Méthodologie et résultats : Les traitements utilisés pour lever la dormance des semences de Treculia africana étaient : (i) le témoin non traité, (ii) le trempage des graines dans l’eau de robinet à température ambiante pendant 24 heures et (iii) le décorticage des graines. Les graines traitées ont été semés sur 04 substrats (sable de Lokoli, sable de Niaouli, sable d’Itchêdè-T

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Owen, James S., and James E. Altland. "Container Height and Douglas Fir Bark Texture Affect Substrate Physical Properties." HortScience 43, no. 2 (2008): 505–8. http://dx.doi.org/10.21273/hortsci.43.2.505.

Повний текст джерела

Анотація:

A study was conducted to quantify the effect of substrate texture on water-holding capacity of douglas fir [Pseudotsuga menziesii (Mirb.) Franco] bark (DFB) in containers of varying height. Medium (less than 2.2 cm) and fine (less than 0.9 cm) DFB were packed into 7.6 cm i.d. aluminum cores 3.8, 7.6, and 15.2 cm tall to determine container capacity (CC) and air space (AS) at varying container heights. Increasing container height resulted in a linear decrease in CC and a linear increase in AS. Fine texture DFB bulk density (Db) increased 18% with increasing container height, whereas Db of mediu

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Šimelevičius, Dainius, and Romas Baronas. "Amperometrinių biojutiklių su sinerginių substratų stiprinimu kompiuterinis modeliavimas." Informacijos mokslai 56 (January 1, 2011): 174–81. http://dx.doi.org/10.15388/im.2011.0.3139.

Повний текст джерела

Анотація:

Šiame straipsnyje yra tiriamas amperometrinis biojutiklis, kuriame biojutiklio atsakas yra stiprinamas chemiškai – sinerginiais substratais. Tokiuose biojutikliuose, be substrato, kurio koncentracija matuojama, naudojamas ir pagalbinis substratas, reikalingas substratų sinergetikai. Biojutiklis yra modeliuojamas naudojant nestacionarias netiesines reakcijos-difuzijos lygtis. Modeliuojami keturi biojutiklio sluoksniai: fermento sluoksnis, kuriame vyksta visos biocheminės reakcijos ir difuzija, dializėsmembrana ir difuzijos sluoksnis, kuriuose vyksta tik difuzija ir reakcijos, kuriose nedalyvauj

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Zhou, Fei, Nianjin Wang, Jinping Zhang, et al. "Formulation of substrates with agricultural and forestry wastes for Camellia oleifera Abel seedling cultivation." PLOS ONE 17, no. 7 (2022): e0265979. http://dx.doi.org/10.1371/journal.pone.0265979.

Повний текст джерела

Анотація:

Five Camellia oleifera Abel seedling substrates were prepared using the conventional formula, but with the peat substituted by the composts of Camellia oleifera shell, pine chips, palm fiber residues, chicken manure, and sheep manure. The physical and chemical properties of the prepared substrates before and after seedling cultivation were determined and their effects on the growth of Camellia oleifera seedling were analyzed. It was found that the survival rates of the one-year-old seedlings produced from stem cuttings on all substrates at 6 months were greater than 97.5%. As compared with the

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Garg, Anshuman, and Anjana Goen. "Substrate Height and Dielectric Constant Dependent Performance of Rectangular Micro Strip Patch Antenna." International Journal of Electrical and Electronics Research 2, no. 3 (2014): 36–39. http://dx.doi.org/10.37391/ijeer.020305.

Повний текст джерела

Анотація:

In this paper, Rectangular Microstrip patch antenna has been designed for different substrate heights and dielectric constants of substrate. This paper proposes a new generation of antenna that applies Meta material properties at ground Plane. The paper analyzes the performance of Micro strip Patch Antenna with and without using the Meta material structure. Effect of bandwidth due to change of substrate height and dielectric constant have been investigated. Finally, bandwidth for each substrate height and dielectric constant is measured for selecting the optimal patch antenna.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Currey, Christopher J., Diane M. Camberato, Ariana P. Torres, and Roberto G. Lopez. "Plant Growth Retardant Drench Efficacy Is Not Affected by Substrate Containing Parboiled Rice Hulls." HortTechnology 20, no. 5 (2010): 863–66. http://dx.doi.org/10.21273/horttech.20.5.863.

Повний текст джерела

Анотація:

Parboiled rice hulls have become a more common component of soilless growing substrates. While there have been reports that some organic substrate components reduce the efficacy of plant growth retardant (PGR) drenches, the influence of rice hulls on PGR drenches is unknown. ‘Callie Deep Yellow’ calibrachoa (Calibrachoa ×hybrid) and ‘Delta Orange Blotch’ pansy (Viola wittrockiana) were planted in containers filled with substrate containing (v/v) 80% peat and 20% perlite or parboiled rice hulls. After planting, 2.5-fl oz drenches containing deionized water or ancymidol, paclobutrazol, or unicon

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Xu, Bohao, Xiaodong Tan, Xizhi Gu, et al. "Shape-driven control of layer height in robotic wire and arc additive manufacturing." Rapid Prototyping Journal 25, no. 10 (2019): 1637–46. http://dx.doi.org/10.1108/rpj-11-2018-0295.

Повний текст джерела

Анотація:

Purpose Once an uneven substrate is aligned, traditional control theories and methods can be used on it, so aligning is of great significance for the development of wire and arc additive manufacturing (WAAM). This paper aims to propose a shape-driven control method for aligning a substrate with slopes to expand the application of WAAM. Design/methodology/approach A substrate with slopes must be aligned by depositing weld beads with slopes. First, considering the large height differences of slopes, multi-layer deposition is needed, and the number of layer of weld beads must be ascertained. Seco

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Dasoju, Shravan, Michael R. Evans, and Brian E. Whipker. "Paclobutrazol Drench Activity in Coir- and Peat-based Root Substrates." HortTechnology 8, no. 4 (1998): 595–98. http://dx.doi.org/10.21273/horttech.8.4.595.

Повний текст джерела

Анотація:

Paclobutrazol drench applications of 0, 2, and 4 mg a.i./pot were applied to `Pacino' potted sunflowers (Helianthus annuus L.) and `Red Pigmy' tuberous rooted dahlias (Dahlia variabilis Willd.) grown in substrates containing 50%, 60%, 70%, or 80% (by volume) sphagnum peat or coir, with the remainder being perlite, to study the efficacy of paclobutrazol (Bonzi). Potted sunflower plant height differed significantly for peat- and coir-based substrates, with greater plant height being observed in coir-based substrates. Plant diameter was significantly greater at higher percentages of peat or coir

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Substrate Height"

1

Bartol, Ian K. "Crassostrea virginica on Constructed Intertidal Oyster Reefs: The Effects of Tidal Height and Substrate Level on Settlement, Growth, and Mortality." W&M ScholarWorks, 1995. https://scholarworks.wm.edu/etd/1539617692.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Rotta, Luiz Henrique da Silva [UNESP]. "Estimation of Submerged Aquatic Vegetation Height and Distribution in Nova Avanhandava Reservoir (São Paulo State, Brazil) Using Bio-Optical Modeling." Universidade Estadual Paulista (UNESP), 2015. http://hdl.handle.net/11449/123843.

Повний текст джерела

Анотація:

Made available in DSpace on 2015-06-17T19:34:05Z (GMT). No. of bitstreams: 0 Previous issue date: 2015-03-11. Added 1 bitstream(s) on 2015-06-18T12:47:27Z : No. of bitstreams: 1 000835339.pdf: 4433443 bytes, checksum: c258cceb81b138f03e2027a4de764d4a (MD5)<br>Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)<br>Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)<br>Modelos semi-analíticos vêm sendo desenvolvidos para remover a influência da coluna da água e, com isso, recuperar a resposta do substrato em corpos águas, com o intuito de estudar alvos submersos. Por

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Rotta, Luiz Henrique da Silva. "Estimation of Submerged Aquatic Vegetation Height and Distribution in Nova Avanhandava Reservoir (São Paulo State, Brazil) Using Bio-Optical Modeling /." Presidente Prudente, 2015. http://hdl.handle.net/11449/123843.

Повний текст джерела

Анотація:

Orientador: Nilton Nobuhiro Imai<br>Coorientador: Enner Herenio de Alcântara<br>Banca: Antonio Maria Garcia Tommaselli<br>Banca: Ligia Flavia Antunes Batista<br>Banca: Deepak Ranjan Mishra<br>Banca: Arcilan Trevenzoli Assireu<br>Resumo: Modelos semi-analíticos vêm sendo desenvolvidos para remover a influência da coluna da água e, com isso, recuperar a resposta do substrato em corpos águas, com o intuito de estudar alvos submersos. Porém, a maioria desses modelos foram elaborados para águas oceânicas e costeiras, ou seja, ainda são limitados os estudos sobre a recuperação da resposta do substra

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Ashby, Alison Aria. "The effects of stocking density, amount of substrate, frequency of feeding, and waste removal on nursery production and the effects of substrate height on pond production of freshwater prawn Macrobrachium rosenbergii." 2003. http://etd.utk.edu/2003/AshbyAlison.pdf.

Повний текст джерела

Анотація:

Thesis (M.S.)--University of Tennessee, Knoxville, 2003.<br>Title from title page screen (viewed Mar. 22, 2004). Thesis advisor: J. Larry Wilson. Document formatted into pages (viii, 54 p. : col. ill.). Vita. Includes bibliographical references (p. 50-53).

Стилі APA, Harvard, Vancouver, ISO та ін.

5

McQuaid, Christopher, and J. R. Lindsay. "Interacting effects of wave exposure, tidal height and substratum on spatial variation in densities of mussel Perna perna plantigrades." 2005. http://hdl.handle.net/10962/d1011635.

Повний текст джерела

Анотація:

A fine time-scale study was undertaken on the effects of wave exposure, tidal height and substratum type on mussel recruit densities on the south coast of South Africa. Prior to sampling, an exposed and a sheltered shore were identified at each of 2 sites (Diaz Cross and High Rocks) 7 km apart. Each shore was divided into 3 shore levels (termed zones) within which 3 substrata (adult mussels, coralline and non-coralline macroalgae) were sampled. Destructive sampling of early (<1 mm) and late (1 to 5 mm) plantigrades was performed daily over 30 d during a period of comparatively high recruitment

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Substrate Height"

1

Manokruang, Supasit, Frederic Vignat, Matthieu Museau, and Maxime Limousin. "Process Parameters Effect on Weld Beads Geometry Deposited by Wire and Arc Additive Manufacturing (WAAM)." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_3.

Повний текст джерела

Анотація:

AbstractAmong Additive Manufacturing technologies, Wire and Arc Additive Manufacturing process is strongly dependent of deposition conditions such as welding parameters, substrate temperature, trajectory. In this research, geometry and temperature evolutions of single beads have been investigated according to process parameters modifications. For our experiment, a heating device have been used in order to control the substrate temperature from room temperature up to 400 °C. Considering the Cold Metal Transfer technology, welding parameters, Wire Feed Speed (WFS) and Travel Speed (TS), have bee

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Cazaubon, Valentine, Audrey Abi Akle, and Xavier Fischer. "A Parametric Study of Additive Manufacturing Process: TA6V Laser Wire Metal Deposition." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_4.

Повний текст джерела

Анотація:

AbstractAdditive Manufacturing has proven to be an economically and industrially attractive process in building or repairing parts. However, the major issue of this new process is to guarantee a mechanical behavior identical to the subtractive manufacturing methodologies. The work, presented in this paper, is centered on the Laser Wire Metal Deposition (LMD-w) method with the metallic alloy TA6V. Its working principle is to fuse a coaxial wire on a substrate with a laser as a heat source. To better understand the interaction between the input parameters (Laser Power, Wire Feed Speed and Tool S

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Alim, Md Abdul, Mohd Zulkifly Abdullah, Mohd Sharizal Abdul Aziz, et al. "Effect of Needle Size and Needle Height to Substrate in Encapsulation Process of LED Packaging." In Advanced Structured Materials. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92964-0_15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Chaurasia, R. K., and S. K. Nippani. "Choice of Suitable Height of Substrate in the Designing of Microstrip Antenna for X-band Communication." In Advances in Intelligent Systems and Computing. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1510-8_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Priya, Pradip Kumar, Ram Pratap Yadav, Hari Pratap Bhasker, Anil Kumar, and Kusum Lata Pandey. "Investigation of Substrate-effect on BaF2 Thin Films: A Study of Fractal Nature." In Materials Science: A Field of Diverse Industrial Applications. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815051247123010007.

Повний текст джерела

Анотація:

BaF2 thin films of thickness 20 nm are prepared using the electron beam evaporation technique (at room temperature) on glass, silicon (Si) as well as aluminum (Al) substrate, respectively. These substrates play a crucial role in the evolution of thin film surface morphology. The thin films grown far from equilibrium have self-affine nature which is reminiscent of fractal behaviour. The surface morphology of films is recorded by atomic force microscopy (AFM). Scaling law analysis is performed on AFM images to confirm that the thin film surfaces under investigation have self-affine nature. The c

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Bottacchi, Stefano, and Francesca Bottacchi. "The Gaussian-Harmonic Model of the Substrate Height Density." In Theory and Modeling of Cylindrical Nanostructures for High-Resolution Spectroscopy. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-323-52731-6.00005-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Cassidy, Patrick, Paul Slebodnick, and James Tagert. "Effect of Surface Preparation on Coating Performance." In Standards and Best Practice for Surface Preparation of Steel Substrates-A Compilation of SSPC Standards, Presentations and Technical Articles. AMPP, Association for Materials Protection and Performance15835 Park Ten Place, Houston, TX 77084, 2021. https://doi.org/10.5006/pb-com05-ch41.

Повний текст джерела

Анотація:

Coating performance and longevity is highly dependent on the quality of substrate surface preparation. The effect of profile height, profile type (e.g., type of tool used to perform the prep, angularity of profile, etc.), extent of cleanliness, and amount of chloride contamination on coating performance were all studied to determine the correlation between these factors in an attempt to identify the primary factor in coating failure due to improper surface preparation.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Padya, Balaji, N. Ravikiran, Ravi Kali, Sanjay R. Dhage, Ravi Meduri, and P. K. Jain. "Aligned Carbon Nanotube Thin Film Based High Energy Cathode Emitters." In Thin Film Nanomaterials: Synthesis, Properties and Innovative Energy Applications. BENTHAM SCIENCE PUBLISHERS, 2024. http://dx.doi.org/10.2174/9789815256086124010013.

Повний текст джерела

Анотація:

This chapter emphasizes on carbon nanotube’s (CNT) growth kinetics and the development of CNT-based thin film cathode emitters. It highlights intensifying critical process parameters to design appropriate cathodes by creating vertically aligned carbon nanotubes using injection chemical vapour deposition. In the process of improving field emission (FE) characteristics, (i) the process of hetero-atom doping, (ii) high degree of alignment, (iii) controlled spatial distribution, and (iv) uniform height of CNT are the desirable criteria. The strategy of hetero-atom doping in a carbon network is ada

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Kumar Gupta, Anand, Prof Rajendra Kumar, and Prof Ashutosh Singh. "COMPARISON BETWEEN PENTAGONAL AND E-SHAPED MICROSTRIP PATCH ANTENNAS FOR 5G APPLICATION." In Futuristic Trends in Electronics & Instrumentation Engineering Volume 3 Book 1. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bdei1p4ch2.

Повний текст джерела

Анотація:

Microstrip patch antennas are in huge demand because of their compact size and low cost. In this paper, we have done comparative study of pentagonal and E- shaped microstrip patch antennas. The resonancefrequency chosen for the comparison is 27 GHz for 5G applications.Return loss,Reflection coefficient, VSWR and far field radiation pattern etc. are chosen parameters for thecomparison. Roger RT 5880 is used as substrate for the designing of the antennas, its dielectric constant is 2.2 and has a height of 0.797 mm. The software used for designing and comparison of the antennas is Computer Simula

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Pimentel, Rafael Ellwanger, Arnaldo Ruben Gonzalez, Matheus Botega, and Leandro Rubén González. "Analysis of dilution response surfaces and bead morphology in MIG-welding process." In Interconnections of Knowledge: Multidisciplinary Approaches. Seven Editora, 2024. http://dx.doi.org/10.56238/sevened2024.010-051.

Повний текст джерела

Анотація:

The complexity of the current welding processes, as well as their sensitivity and precision, make it necessary to use statistical methods and optimization, accompanied by the search for experimental error and the adjustment of the model obtained, aiming at reducing time and cost. Although there are numerous treatments that have emerged over time, the Response Surface Methodology (MSR) has become one of the most appropriate ways to manage research related to this scope, by combining design and analysis of experiments, modeling and optimization. In addition, the search for processes that adjust

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Substrate Height"

1

Layak, Rupali, Sasmita Kumari Nayak, and Sanjeev Kumar Mishra. "Effect of Substrate-height on the property of ultrawideband Wilkinson Power Divider." In 2024 IEEE 1st International Conference on Advances in Signal Processing, Power, Communication, and Computing (ASPCC). IEEE, 2024. https://doi.org/10.1109/aspcc62191.2024.10882050.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Reed, Carl W. "A Study of the Effect of Film Thickness and Blast Profile on Accelerated Underfilm Corrosion Creep." In SSPC 2013 Greencoat. SSPC, 2013. https://doi.org/10.5006/s2013-00054.

Повний текст джерела

Анотація:

Abstract The creepage of corrosion underneath a coatings film applied to a steel test panel is often used as a performance test for the anti-corrosion properties of a coating system. Underfilm corrosion creep, also sometimes referred as scribe creep in the laboratory environment, is defined as the degree of corrosion emanating away from a scribe line underneath a coating film applied to a steel substrate. There are several factors which may affect the degree of corrosion creep, two of these being dry film thickness of the coating and the peak height of the blast profile of a steel substrate. A

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Ward, Darren. "An Investigation into the Effect of Surface Profile on the Performance of Coatings in Accelerated Corrosion Tests." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07001.

Повний текст джерела

Анотація:

Abstract It is well known in the protective coatings industry that the surface profile of the substrate can influence the performance of high build coatings which are used extensively in corrosive environments. It is common practice to specify an angular blast profile having an average peak height of between 40-75 microns using chilled iron grit as the blast media. Peak height is not the only parameter which influences performance as the number of peaks per unit length can also affect coating performance. Both peak height and peak count can be varied with abrasive selection and their influence

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Cassidy, Patrick, Paul Slebodnick, and James Tagert. "Effect of Surface Preparation on Coating Performance." In SSPC 2016 Greencoat. SSPC, 2016. https://doi.org/10.5006/s2016-00012.

Повний текст джерела

Анотація:

Abstract Coating performance and longevity is highly dependent on the quality of substrate surface preparation. The effect of profile height, profile type (e.g., type of tool used to perform the prep, angularity of profile, etc.), extent of cleanliness, and amount of chloride contamination on coating performance were all studied to determine the correlation between these factors in an attempt to identify the primary factor in coating failure due to improper surface preparation.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Guan, Shiwei William. "Abrasive Blasting Surface Preparation – Does the Pipeline Coating Industry Really Understand It?" In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11245.

Повний текст джерела

Анотація:

Abstract The author uses three recent international pipeline projects as examples, to illustrate that the typical surface profile height and abrasive blast cleaning requirements in today’s coating standards and specifications have not been sufficient to define the adequate level of the abrasive blasting in order to provide wetting and adhesion of the pipe coatings to the pipe substrate, partially causing the pipeline coating disbondment. Adhesion mechanisms, limitations of the current standards of defining surface profile, and recommendations for future pipeline coating projects are discussed.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Fletcher, J. F., and D. Leonard. "New Developments in Surface Profile Measurement for Blast Cleaned Surfaces." In SSPC 2013 Greencoat. SSPC, 2013. https://doi.org/10.5006/s2013-00020.

Повний текст джерела

Анотація:

Abstract When protective coatings are to be applied to structures, it is important that the surface is clean and dry if premature failure of the coating is to be prevented and the full coating service life achieved. In many situations for both new build and repair of structures, blast cleaning of the surface is required to remove contamination and to create an anchor pattern to enhance the adhesion of the coating system to the substrate. The measurement of the profile is important in achieving the specification but also to ensure that the blast cleaning process is in control and not producing

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Mori, Hiroyuki, Sayuri Kohara, Keishi Okamoto, Hirokazu Noma, and Kazushige Toriyama. "Effects of Low CTE Materials on Thermal Deformation of Organic Substrates in Flip Chip Package Application." In ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48741.

Повний текст джерела

Анотація:

Coefficient of thermal expansion (CTE) characteristic of organic materials for substrates in flip chip package application demanded by semiconductor package requirements is becoming lower than ever. In general, height restrictions are imposed on package-on-package (PoP) devices in mobile applications. One should hence establish a tight budget on the height variation in manufacturing of the devices. Given such background, a lowering of the CTE characteristic of package substrates is an attractive solution for reducing package deformation upon manufacturing, since it contributes to minimize CTE

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Lee, Tim Wang, Francesco de Paulis, Mike Resso, Melinda Piket-May, and Eric Bogatin. "Non-destructive PCB Substrate Height Extraction with Multi-Measurement Technique." In 2021 IEEE 25th Workshop on Signal and Power Integrity (SPI). IEEE, 2021. http://dx.doi.org/10.1109/spi52361.2021.9505208.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Jaschke, Thomas, Benjamin Rohrdantz, and Arne F. Jacob. "Dual-band stepped-impedance transformer to full-height substrate-integrated waveguide." In 2015 European Microwave Conference (EuMC 2015). IEEE, 2015. http://dx.doi.org/10.1109/eumc.2015.7345776.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Vafaei, Saeid, Panagiota Angeli, and Dongsheng Wen. "Bubble Formation on Top of Submerged Needle and Substrate Plates." In ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting. ASMEDC, 2010. http://dx.doi.org/10.1115/fedsm-icnmm2010-30551.

Повний текст джерела

Анотація:

The purpose of this investigation is to conduct a comparative study on the formation of bubble on top of a stainless steel needle nozzle and two substrate plate nozzles. The experimental study is conducted on a submerged needle nozzle with internal diameter of 0.51 mm and 0.155 mm thickness, and two stainless steel substrate plates with nozzle diameter of 0.4 mm and 0.51mm respectively. The experiment is carried out under low gas flow rates (0.015 ∼ 0.85 ml/min). The bubble formation is recorded by a high speed video camera and detailed characteristics of bubble formation such as the variation

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Substrate Height"

1

Rosse, Anine. Stream channel monitoring for Wind Cave National Park 2021 Data report. National Park Service, 2023. http://dx.doi.org/10.36967/2296623.

Повний текст джерела

Анотація:

The Northern Great Plains Inventory and Monitoring Network (NGPN) began stream channel monitoring in Highland Creek at Wind Cave National Park (WICA) in 2021. This data report summarizes the data collected during the 2021 season pertaining to watershed, reach, and physical habitat. After data are collected for at least four cycles, trends may be reported. This report covers three main areas: 1) Reporting on upland channel characteristics data that may affect habitat such as: land cover, drainage area, and total stream length; 2) Reporting of geomorphic dimensions such as: channel widths, bank

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Dick, Warren, Yona Chen, and Maurice Watson. Improving nutrient availability in alkaline coal combustion by-products amended with composted animal manures. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7587240.bard.

Повний текст джерела

Анотація:

Hypothesis and Objectives: We hypothesized that coal combustion products (CCPs), including those created during scrubbing of sulfur dioxide from flue gases, can be used alone or mixed with composted animal manures as effective growth media for plants. Our specific objectives were, therefore, to (1) measure the chemical, physical and hydraulic properties of source materials and prepared mixes, (2) determine the optimum design mix of CCPs and composted animal manures for growth of plants, (3) evaluate the leachate water quality and plant uptake of selected elements from prepared mixes, (4) quant

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Dick, Warren, Yona Chen, and Maurice Watson. Improving nutrient availability in alkaline coal combustion by-products amended with composted animal manures. United States Department of Agriculture, 2006. http://dx.doi.org/10.32747/2006.7695883.bard.

Повний текст джерела

Анотація:

Hypothesis and Objectives: We hypothesized that coal combustion products (CCPs), including those created during scrubbing of sulfur dioxide from flue gases, can be used alone or mixed with composted animal manures as effective growth media for plants. Our specific objectives were, therefore, to (1) measure the chemical, physical and hydraulic properties of source materials and prepared mixes, (2) determine the optimum design mix of CCPs and composted animal manures for growth of plants, (3) evaluate the leachate water quality and plant uptake of selected elements from prepared mixes, (4) quant

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!