Готові списки джерел за темами / Supercritical deposition

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Supercritical deposition"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Supercritical deposition".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Supercritical deposition"

Edwards, Tim, and Steven Zabarnick. "Supercritical fuel deposition mechanisms." Industrial & Engineering Chemistry Research 32, no. 12 (1993): 3117–22. http://dx.doi.org/10.1021/ie00024a022.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Markova, M., A. Gavrilenko, A. Stepacheva, and M. Sulman. "Stydy of the cobalt containing catalyst synthesized in the medium of supercritical carbon dioxide." Bulletin of Science and Practice, no. 12 (December 11, 2017): 113–17. https://doi.org/10.5281/zenodo.1101188.

Повний текст джерела

Анотація:

The article shows the possibility of using of supercritical carbon dioxide for the synthesis of catalytically active systems. A cobalt-containing catalyst supported on silica was synthesized by supercritical deposition. Physicochemical study of the obtained sample showed that, during the synthesis in the medium of supercritical carbon dioxide, the structure of the support does not change; the particles of the active phase are distributed evenly on the support surface with a thin layer.

Стилі APA, Harvard, Vancouver, ISO та ін.

Wang, Yu Zhen, Shu Zhong Wang, Yang Guo, et al. "Numerical Simulation of Salt Particle - Supercritical Water Flow in a 90° Bend Pipe." Applied Mechanics and Materials 316-317 (April 2013): 404–7. http://dx.doi.org/10.4028/www.scientific.net/amm.316-317.404.

Повний текст джерела

Анотація:

Salt deposition from supercritical water has been identified as a key issue in the development of supercritical water technologies. In order to better understand salt deposition behavior, the salt particle – supercritical water flow in a 90° bend pipe with smooth walls was simulated using discrete element method (DEM) coupled with computational fluid dynamics (CFD). The transport behavior of pure supercritical water flow and salt particle-supercritical water flow with diiferent particle sizes were both simulated. The numerical results indicates that for the pure supercritical water flow, the p

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhu, Liangyu, Tao Zhou, Xijia Ding, Xuemeng Qin, and Jialei Zhang. "Study on the Movement and Deposition of Particles in Supercritical Water Natural Circulation Based on Grey Correlation Theory." Energies 12, no. 12 (2019): 2315. http://dx.doi.org/10.3390/en12122315.

Повний текст джерела

Анотація:

The movement and deposition of particles that occur during their natural circulation in supercritical water exercise an important impact on the safe and stable operation of a supercritical water reactor (SCWR). When supercritical water flows in pipelines, a large number of corrosive particles may be generated due to pipeline corrosion or the purity of the fluid itself. The presence of particulate matter affects the heat transfer efficiency of the pipeline, increasing flow resistance and easily promoting heat transfer deterioration. ANSYS-CFX numerical analysis software was used to simulate the

Стилі APA, Harvard, Vancouver, ISO та ін.

ZHOU, Tao, Xiaolu FANG, Xu YANG, Daping LIN, and Yunan FAN. "ICONE23-1274 RESEARCH OF FINE PARTICLE THERMOPHORESIS DEPOSITION IN SUPERCRITICAL WATER." Proceedings of the International Conference on Nuclear Engineering (ICONE) 2015.23 (2015): _ICONE23–1—_ICONE23–1. http://dx.doi.org/10.1299/jsmeicone.2015.23._icone23-1_135.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, Ying, Dafei Kang, Carl Saquing, Mark Aindow, and Can Erkey. "Supported Platinum Nanoparticles by Supercritical Deposition." Industrial & Engineering Chemistry Research 44, no. 11 (2005): 4161–64. http://dx.doi.org/10.1021/ie050345w.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

HONG, Xu. "E301 ALLEVIATING FLOW ACCELERATED CORROSION AND MAGNETITE DEPOSITION ON SUPERCRITICAL UNITS(Corrosion)." Proceedings of the International Conference on Power Engineering (ICOPE) 2009.3 (2009): _3–265_—_3–269_. http://dx.doi.org/10.1299/jsmeicope.2009.3._3-265_.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Dayong, and Zheng Sun. "Numerical Simulation of the Proppant Settlement in SC-CO2 Sand-Carrying Fluid in Fracturing Fractures." Energies 16, no. 1 (2022): 11. http://dx.doi.org/10.3390/en16010011.

Повний текст джерела

Анотація:

Supercritical CO2 fracturing has unique advantages for improving unconventional reservoir recovery. Supercritical CO2 can penetrate deep into the reservoir and increase reservoir reform volume, and it is less damaging to reservoir and easy to flow back. However, when the supercritical CO2 flows as the sand-carrying fluid in the fracture, the settlement of the proppant is still worth studying. Based on the study of supercritical CO2 density and viscosity properties, assuming that the reservoir has been pressed out of the vertical crack by injecting prepad fluid, the proppant characteristics in

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhao, Bin, Takeshi Momose, and Yukihiro Shimogaki. "Deposition of Cu-Ag Alloy Film by Supercritical Fluid Deposition." Japanese Journal of Applied Physics 45, No. 49 (2006): L1296—L1299. http://dx.doi.org/10.1143/jjap.45.l1296.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kalan, Roghi E., Benjamin A. McCool, and Carl P. Tripp. "Supercritical Fluid Atomic Layer Deposition: Base-Catalyzed Deposition of SiO2." Langmuir 32, no. 28 (2016): 7170–79. http://dx.doi.org/10.1021/acs.langmuir.6b01669.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Supercritical deposition"

Peng, Qing. "Nanoscale Engineering Materials with Supercritical Fluid and Atomic Layer Deposition." NCSU, 2009. http://www.lib.ncsu.edu/theses/available/etd-07062009-222243/.

Повний текст джерела

Анотація:

With the development of material science and technology, modification of substrates, which have random geometry and high aspect ratio three dimensional (3D) complex structures, with desired functional, reactive and stable coatings becomes important and challenging. The ability to fabricate mono- or multi-layers of functional materials with precisely controlled dimensions, finely tuned composition and molecular structures, attracts significant interests in materials science and is the key to construct such devices and structures at nano- and micro- scale with desired properties. In this study,

Стилі APA, Harvard, Vancouver, ISO та ін.

Wilson, James W. "Development and optimisation of supercritical fluid deposition of semiconductor films." Thesis, University of Southampton, 2010. https://eprints.soton.ac.uk/167623/.

Повний текст джерела

Анотація:

This thesis is concerned with the deposition, and characterisation, of semiconductor thin films and microstructures deposited from a supercritical uid. Thin films of CdS, GaP, InP, InAs, and Ge were deposited using supercritical CO2 and CO2-solvent mixtures. Ge was deposited into macropores etched into crystalline silicon substrates. A variety of reactors were designed in order to achieve the successful deposition of the materials. The surface morphology and crystallinity of the films were characterised by scanning electron microscopy and X-ray diffraction. The chemical composition of the film

Стилі APA, Harvard, Vancouver, ISO та ін.

Karanikas, Christos Fotios. "Supercritical fluid deposition of thin metal films kinetics, mechanics and applications /." Amherst, Mass. : University of Massachusetts Amherst, 2009. http://scholarworks.umass.edu/dissertations/AAI3359900/.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

McMasters, Brian Philip. "Effect of Fuel Chemical Composition on Pyrolytic Reactivity and Deposition Propensity under Supercritical Conditions." University of Dayton / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1398682863.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Karakama, Keigo. "Methods for the characterization of deposition and transport of magnetite particles in supercritical water." Thesis, University of British Columbia, 2011. http://hdl.handle.net/2429/39772.

Повний текст джерела

Анотація:

Generation IV CANDU Supercritical Water Reactor (SCWR) is being developed to use a light water coolant at high temperature and pressure beyond the critical point of water (374⁰C and 22.1 MPa). The dramatic decrease in the solubility of magnetite in supercritical water suggests that the precipitation of magnetite particles will occur in the reactor core which can deposit on the fuel cladding or be transported to the steam turbine. A once-through flow system was modified to develop experimental techniques for studying the deposition and transport of magnetite particles in supercritical water ont

Стилі APA, Harvard, Vancouver, ISO та ін.

Hodes, Marc Scott. "Measurements and modeling of deposition rates from near-supercritical, aqueous, sodium sulfate and potassium sulfate solutions to a heated cylinder." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/46259.

Повний текст джерела

Анотація:

Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1998.<br>Includes bibliographical references (leaves 365-373).<br>In the Supercritical Water Oxidation (SCWO) process, a technology emerging for the disposal of hazardous organic wastes, organic compounds containing heteroatoms such as S, Cl and P are oxidized to the corresponding acid. In order to reduce corrosion, bases are therefore often injected into the reactor. The salts that are formed upon neutralization (sulfates, chlorides, phosphates, etc.) have low solubility in supercritical water (SCW) and co

Стилі APA, Harvard, Vancouver, ISO та ін.

Stimpson, Curtis K. "The Composition and Morphology of Coal Ash Deposits Collected in an Oxy-Fuel, Pulverized Coal Reactor." BYU ScholarsArchive, 2012. https://scholarsarchive.byu.edu/etd/3225.

Повний текст джерела

Анотація:

Coal ash deposits were collected in a 160 kWth, down-fired oxy-coal reactor under staged and unstaged conditions for four different coals (PRB, Gatling, Illinois #6, and Mahoning). Concentration measurements of carbon, oxygen, sodium, magnesium, aluminum, silicon, phosphorus, sulfur, chlorine, potassium, calcium, titanium, chromium, manganese, iron, nickel, strontium, and barium were gathered from each deposit sample using scanning electron microscopy and energy dispersive spectroscopy (SEM-EDS). Backscattered electron micrographs for each deposit sample were analyzed to gather morphological d

Стилі APA, Harvard, Vancouver, ISO та ін.

Jiang, Hua. "Effect of Changes in Flow Geometry, Rotation and High Heat Flux on Fluid Dynamics, Heat Transfer and Oxidation/Deposition of Jet Fuels." University of Dayton / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1300553102.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Tetsi, Emmanuel. "Développement de films minces à base de nanoparticules diélectriques et optimisatisation des conditions de dépôt pour fabriquer des condensateurs de découplage utilisés dans des assemblages à haute densité de modules électroniques." Thesis, Bordeaux, 2019. http://www.theses.fr/2019BORD0113/document.

Повний текст джерела

Анотація:

Dans le cadre de l’intégration tridimensionnelle (3D) associée à l’utilisation d’un nombre croissant de circuits intégrés (CIs), le besoin en condensateurs de découplage à forte densité de capacité (≥ 1 μF.cm-2), capables d’opérer sur une gamme de fréquences de plus en plus étendue, est crucial afin de limiter les fluctuations de tension d’alimentation au niveau des CIs. Le principal frein au développement de ces condensateurs réside dans l’obtention de couches minces (≤ 100 nm) à partir de matériaux ayant une forte permittivité relative (ε_r > 200 à 1 GHz), des technologies compatibles ave

Стилі APA, Harvard, Vancouver, ISO та ін.

Durand, Véronique. "Développement d’un nouveau procédé de synthèse de membranes inorganiques ou composites par voie CO2 supercritique pour la séparation de gaz." Thesis, Montpellier 2, 2011. http://www.theses.fr/2011MON20175.

Повний текст джерела

Анотація:

L'utilisation de membranes pour la séparation/purification de mélanges de gaz permet d'envisager la mise en œuvre de procédés continus et faiblement énergivores. Les performances des membranes étant directement reliées à la méthode utilisée pour leur synthèse/modification, une nouvelle génération de membranes est attendue à partir de la méthode originale de dépôt « dynamique » développée et mise au point dans ce travail, en milieu CO2 supercritique (CO2SC). Les propriétés des fluides supercritiques, intermédiaires entre celles d'un liquide et d'un gaz (densité et diffusivité élevées, viscosité

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Supercritical deposition"

Sahle-Demessie, Endalkachew. Deposition of chemicals in semi-porous solids using supercritical fluid carriers. 1994.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Supercritical deposition"

Wang, Shuzhong, Donghai Xu, Yang Guo, et al. "Study on Salt Deposition and Crystallization Properties in Sub/Supercritical Water." In Supercritical Water Processing Technologies for Environment, Energy and Nanomaterial Applications. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-9326-6_7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ruiz, JC, F. Charton, S. Sarrade, et al. "Nanophased Materials in Supercritical CO2 : Ceramic Nanopowder Synthesis, Encapsulation and Deposition." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470930991.ch24.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhu, Kun, Xiao Yu, Guoqiang Xu, Jiankun Li, Chunlei Zhang, and Maoguo Cao. "Surface Deposition Characteristics on Long Thermal Duration Within Treated and Untreated Stain Steel Tubes of Supercritical Kerosene RP-3 Fuel." In Lecture Notes in Electrical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-7423-5_26.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhang, D. "Ash fouling, deposition and slagging in ultra-supercritical coal power plants." In Ultra-Supercritical Coal Power Plants. Elsevier, 2013. http://dx.doi.org/10.1533/9780857097514.2.133.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kondoh, Eiichi. "Cu Wiring Fabrication by Supercritical Fluid Deposition for MEMS Devices." In Novel Metal Electrodeposition and the Recent Application. IntechOpen, 2019. http://dx.doi.org/10.5772/intechopen.81636.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Erkey, Can, and Michael Türk. "Synthesis of nanostructured composites of metals by supercritical deposition (SCD)." In Synthesis of Nanostructured Materials in Near and/or Supercritical Fluids - Methods, Fundamentals and Modeling. Elsevier, 2021. http://dx.doi.org/10.1016/b978-0-444-64089-5.00001-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Türk, M., Ch Schüßler, M. Hohm, and M. Crone. "The Role of Supercritical Carbon Dioxide and Water in the Synthesis of Metal and Metal Oxide Nanoparticles: Current State of the Art, Further Perspectives and Needs." In Unconventional Green Synthesis of Inorganic Nanomaterials. Royal Society of Chemistry, 2024. http://dx.doi.org/10.1039/9781839165757-00104.

Повний текст джерела

Анотація:

Design, development and synthesis of nanostructured materials, such as supported metal nanoparticles (NPs), are of particular interest for both scientific and industrial communities. NPs are characterised by unique properties, such as high specific surface area, leading to an enhanced energetic state and thus a higher reactivity. At this scale, optical, magnetic and electrical properties are dramatically sensitive to particle size and shape. A promising alternative to classical particle preparation methods is the application of supercritical fluids (SCFs) to design nanostructured materials. Pa

Стилі APA, Harvard, Vancouver, ISO та ін.

Kuznetsova, Tatyana, Martin Hovland, Håkon Rueslåtten, Bjørn Kvamme, Hans Konrad Johnsen, and Gunnar Fladmark. "Supercritical Outsalting as a Source of Salt Deposition: Combining Molecular Modeling and Reservoir Simulations." In Recent Progress in Computational Sciences and Engineering. CRC Press, 2019. http://dx.doi.org/10.1201/9780429070655-68.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Stauss, Sven, Keiichiro Urabe, Hitoshi Muneoka, and Kazuo Terashima. "Pulsed Laser Ablation in High-Pressure Gases, Pressurized Liquids and Supercritical Fluids: Generation, Fundamental Characteristics and Applications." In Applications of Laser Ablation - Thin Film Deposition, Nanomaterial Synthesis and Surface Modification. InTech, 2016. http://dx.doi.org/10.5772/65455.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

S. Kamble, Vishal, Satyajit S. Kamble, Sagar L. Khairnar, et al. "SYNTHESIS AND CHARACTERIZATION OF METAL OXIDE NANOPARTICLES: APPROACHES AND TECHNIQUES." In Futuristic Trends in Chemical Material Sciences & Nano Technology Volume 3 Book 7. Iterative International Publishers, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3becs7p8ch4.

Повний текст джерела

Анотація:

The abstract provides a succinct summary of a wide array of techniques used in the synthesis of metal oxide nanoparticles. It places particular emphasis on two primary approaches: "top-down" and "bottom-up" methods. These techniques encompass a diverse range of environments, including gases, liquids, solids, supercritical fluids, and vacuum conditions.In the "top-down" approach, the focus lies on breaking down bulk materials into nanoparticles. On the other hand, the "bottom-up" approach involves the assembly of atoms or molecules into nanoparticles, often with the assistance of stabilizers. W

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Supercritical deposition"

Shaw, Robert W. "Supercritical Water Oxidation (SCWO) and the Army." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09246.

Повний текст джерела

Анотація:

Abstract During the mid 1980s, the problems of disposing of toxic military materials gained increasing attention. In response, the Army Research Office (ARO) expanded its basic research program on destruction of toxic materials. Previously focused on Chemical Warfare Agent (CWA) decontamination to protect the soldier under attack, the program changed to include weapon demilitarization. ARO reviewed those technologies in use and those in preparation to transform highly toxic organic compounds to relatively benign products and transformation chemistries that move completely to products with no p

Стилі APA, Harvard, Vancouver, ISO та ін.

Fujiwara, Kazutoshi, Keiji Watanabe, Masafumi Domae, and Yosuke Katsumura. "Stability of Chromium Oxide Film Formed by Metal Organic Chemical Vapor Deposition in High Temperature Water up to Supercritical Region." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07411.

Повний текст джерела

Анотація:

Abstract Chemical stability of Cr2O3 in high temperature water is one of the most important factors for corrosion resistivity. In this study, chemical stability of Cr2O3 was investigated in high temperature water up to critical region. From the immersion tests of the Pt specimens with Cr2O3 film formed by metal organic chemical vapor deposition, following conclusions were obtained. In air-saturated water and DO (dissolved oxygen) 400 ppb water at 623 K, Cr2O3 is oxidized and Cr(VI) ions are stable. In the deaerated solution, metal chromium is stable. Therefore, Cr2O3 is chemically stable under

Стилі APA, Harvard, Vancouver, ISO та ін.

Mao, Shang, Tao Zhou, Wenbin Liu, Chunhui Xue, and Yi Jiang. "Particle Deposition Characteristics of Supercritical CO2 in a 90° Bend." In 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-88890.

Повний текст джерела

Анотація:

Abstract 90° bends are widely used in industrial tubes such as supercritical CO2 reactors, which inevitably generate some particle matters during the operation of supercritical CO2 reactors. The particle deposition characteristics in the 90° bend is simulated based on the DPM (Discrete phase model) model. The results show that when the fluid enters the bend, the pressure of the outer wall increases and the pressure of the inner wall decreases due to the centrifugal effect, forming a secondary flow between the inner and outer walls, and forming an obvious low velocity region in the inner wall.

Стилі APA, Harvard, Vancouver, ISO та ін.

Li, Yongji, Qing Zhu, Dean Kong, et al. "Numerical Simulation of Ash and Slag Deposition in Supercritical Tangential Boiler." In 2023 International Conference on Smart Electrical Grid and Renewable Energy (SEGRE). IEEE, 2023. http://dx.doi.org/10.1109/segre58867.2023.00069.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kondoh, E. "Control of selective and blanket ruthenium film deposition chemistry in supercritical CO/sub 2/ fluid chemical deposition." In Digest of Papers. 2004 International Microprocesses and Nanotechnology Conference, 2004. IEEE, 2004. http://dx.doi.org/10.1109/imnc.2004.245715.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Momose, T., T. Ohkubo, T. Uejima, T. Saito, M. Sugiyama, and Y. Shimogaki. "Supercritical Fluid Deposition (SCFD) Technique as a Novel Tool for MEMS Fabrication." In 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2009. http://dx.doi.org/10.1109/memsys.2009.4805475.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhou, Ning, Anantha Krishnan, Ning Zhou, and Anantha Krishnan. "Numerical simulation of jet fuel heat transfer and deposition at supercritical pressure." In 33rd Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-3042.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Qi, Tian, Tao Zhou, Ning Chen, and Juan Chen. "Study on Deposition Motion of Naturally Circulating Particulate Matter in Supercritical Water Based on Factor and Correspondence Analysis." In 2021 28th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/icone28-63677.

Повний текст джерела

Анотація:

Abstract It is very important to study the deposition of particles in natural circulation of supercritical water to ensure the safe and stable operation of supercritical water reactor. The data of natural circulation loop calculated by ANSYS-CFX simulation software were analyzed by factorial analysis method, and the effects of axial distance, initial particle volume fraction, heating power and particle size on particle deposition were obtained. The results show that the contribution rate of particle size to the deposition rate is the largest, about 36.3%, and the contribution rate of initial p

Стилі APA, Harvard, Vancouver, ISO та ін.

Yamada, H., T. Momose, Y. Kitamura, Y. Hattori, Y. Shimogaki, and M. Sugiyama. "Low temperature conformal silicon dioxide deposition using supercritical fluid for polymer-based MEMS." In 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2011. http://dx.doi.org/10.1109/memsys.2011.5734359.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Huang, H. R., H. W. Deng, G. Q. Xu, Z. X. Jia, and Y. C. Fu. "Coke Deposition Effect on the Flow Distribution Characteristics of Kerosene Under Supercritical Pressure." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-56146.

Повний текст джерела

Анотація:

Performed experiments have studied the effect of coke deposition on the characteristics of flow distribution of aviation kerosene RP-3 at supercritical pressure. The whole experiment is divided into two steps: 1) making a coke tube; 2) paralleling the coked tube and a regular one with the same scale and observing the flow distribution status in different system pressure and total mass flow rate. The experimental results indicated that the deposition of coke made a great difference on the flow distribution of fuel. Based on experimental results, it’s demonstrated that the percentage of total ma

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Supercritical deposition"

LaJeunesse, C. A., S. F. Rice, R. G. Hanush, and J. D. Aiken. Salt deposition studies in a supercritical water oxidation reactor. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10190108.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Haroldsen, B. L., B. E. Mills, D. Y. Ariizumi, and B. G. Brown. Transpiring wall supercritical water oxidation reactor salt deposition studies. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/415340.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

LaJeunesse, C. A., and S. F. Rice. Corrosion and salt deposition issues in a supercritical water oxidation reactor. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10121874.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!