Готові списки джерел за темами / The tension in the coatings

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "The tension in the coatings"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "The tension in the coatings".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "The tension in the coatings"

Liao, Yi-Chia, Chun-Hway Hsueh, and Wen-Shin Lee. "Enhancement of String Tension Using Thin-Film Metallic Glass Coatings." Recent Progress in Materials 02, no. 02 (2020): 1–12. https://doi.org/10.21926/rpm.2002014.

Повний текст джерела

Анотація:

Inspired by the application of metallic glass sheet as face material for improving the performance of golf clubs, the present work was aimed to explore the application of thin-film metallic glass (TFMG) coatings for enhancing the performance of strings. In order to achieve this aim, badminton strings were coated with TFMG coatings of different thicknesses. The compositions of these TFMG coatings were analyzed using an electron probe micro-analyzer. The amorphous structure of the film was verified using X-ray diffraction. In order to simulate the strung tension of the string in the racquet, the

Стилі APA, Harvard, Vancouver, ISO та ін.

Torvik, Peter J. "Analysis of Free-Layer Damping Coatings." Key Engineering Materials 333 (March 2007): 195–214. http://dx.doi.org/10.4028/www.scientific.net/kem.333.195.

Повний текст джерела

Анотація:

A free layer damping treatment is formed by applying a coating of a high damping material to one or both sides of a structure. If the coating is perfectly bonded to the structure, the coating may be taken as being subjected to the strain at the interface between structure and coating. Consequently, the dominant component of strain is tensile. Free layer treatments may be symmetric (identical coatings on both sides of the structure), or asymmetric (one side only), and applied to beams, plates or shells in bending or in tension. Two classes of treatments are of interest, those employing thin coa

Стилі APA, Harvard, Vancouver, ISO та ін.

Shugurov, Artur Rubinovich, and Evgenii Dmitrievich Kuzminov. "The Effect of Multilayer Architecture and Ta Alloying on the Mechanical Performance of Ti-Al-N Coatings under Scratching and Uniaxial Tension." Metals 11, no. 8 (2021): 1307. http://dx.doi.org/10.3390/met11081307.

Повний текст джерела

Анотація:

The present work is focused on a comparative study of the effect of Ti-Al interlayers and Ta alloying on the mechanical behavior of Ti1−xAlxN coatings under normal contact pressure and in-plane straining. The contact loading of the samples was carried out by scratch testing, while the in-plane tensile straining was performed by uniaxial tension of the coated steel substrates. The Ti0.45Al0.55N and Ti0.43Al0.45Ta0.12N monolithic coatings as well as the Ti0.45Al0.55N/Ti0.45Al0.55 multilayer coatings with different number and thickness of the layers were deposited by DC magnetron sputtering. It w

Стилі APA, Harvard, Vancouver, ISO та ін.

Xie, Wei Hong, Nan Zhou, Shun Cai Li, and Guo Bao. "Experiment Research on the Surface Tension and Contact Angle of Modified Camouflage Coating." Advanced Materials Research 486 (March 2012): 221–26. http://dx.doi.org/10.4028/www.scientific.net/amr.486.221.

Повний текст джерела

Анотація:

In thisexperiment, nanoCaCO3, nanoSiO2, nanoTiO2and nanoZnO were chosen and added into waterborne camouflage coating respectively to make nanomaterial camouflage coatings. Both the surface tension and the contact angle of the coating (on steel plate and on concrete blocks) were measured by the OCA15+ video optics contact angle admeasuring apparatus; the nanomaterials influence on the interfacial properties of camouflage coating were studied based on its changing concentration. The experiment indicates that the relationship between the concentration of nanomaterial and the surface tension of th

Стилі APA, Harvard, Vancouver, ISO та ін.

Noè, Camilla, Chiara Tonda-Turo, Irene Carmagnola, Minna Hakkarainen, and Marco Sangermano. "UV-Cured Biodegradable Methacrylated Starch-Based Coatings." Coatings 11, no. 2 (2021): 127. http://dx.doi.org/10.3390/coatings11020127.

Повний текст джерела

Анотація:

Promising UV-curable starch-based coatings were fabricated by utilizing methacrylated starch. The aqueous methacrylated starch solution was cast on a glass substrate, and UV-cured after drying. The efficiency of UV-curing process was monitored with gel percentage measurements. The thermal and mechanical properties of the fabricated UV-cured coatings were investigated through differential scanning calorimetry and tensile test and compared with the starch-based uncured casted coatings. A complete characterization of the surface properties was performed by means of pencil hardness, adhesion, solv

Стилі APA, Harvard, Vancouver, ISO та ін.

Häßler, Mai, Dustin Häßler, Sascha Hothan, and Simone Krüger. "Fire tests of steel tension rod systems with intumescent coating." Journal of Structural Fire Engineering 11, no. 1 (2019): 22–32. http://dx.doi.org/10.1108/jsfe-01-2019-0005.

Повний текст джерела

Анотація:

Purpose The purpose of this paper is to investigate the performance of intumescent coating on tension rod systems and their components. Steel tension rod systems consist of tension rods, fork end connectors and associated intersection or gusset plates. In case of fire, beside the tension rods themselves, the connection parts require appropriate fire protection. Intumescent fire protection coatings prevent a rapid heating of the steel and help secure the structural load-carrying capacity. Because the connection components of tension rod systems feature surface curvature and a complex geometry,

Стилі APA, Harvard, Vancouver, ISO та ін.

Loganina, Valentina. "Development of model of the quality of the appearance of paint and varnish coatings." MATEC Web of Conferences 298 (2019): 00003. http://dx.doi.org/10.1051/matecconf/201929800003.

Повний текст джерела

Анотація:

The regularities of the formation of the quality of the appearance of coatings from the rheological and technological properties of colorful compositions are established. It was revealed that with an increase in the surface tension of paint , a lower quality of the appearance of the resulting coating is observed. With an increase in the porosity of the substrate, an increase in the surface roughness of the coatings is observed. A model of the appearance quality of coatings is proposed depending on the porosity of the substrate and the surface tension of the paint composition

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Yang, Chenqi Zou, Mengyan Zang, and Shunhua Chen. "Experimental study on mechanical property and stone-chip resistance of automotive coatings." Materials Research Express 9, no. 1 (2022): 016402. http://dx.doi.org/10.1088/2053-1591/ac45bb.

Повний текст джерела

Анотація:

Abstract The damage of automotive coatings caused by stone impact is a problem that has attracted great attention from automotive companies and users. In this work, experiments were conducted to investigate the dynamic tensile properties and stone-chip resistance of automotive coatings. Four kinds of paint films and three typical coatings (single-layer electrocoat coating, single-layer primer coating, and multilayered coating) were used. Under dynamic tensile load using split Hopkinson tension bar (SHTB), the engineering stress-strain curves of the paint films at medium and high strain rates (

Стилі APA, Harvard, Vancouver, ISO та ін.

Gibbons, Michael J., Saeid Nikafshar, Tina Saravi, Katie Ohno, Sanjeev Chandra, and Mojgan Nejad. "Analysis of a Wide Range of Commercial Exterior Wood Coatings." Coatings 10, no. 11 (2020): 1013. http://dx.doi.org/10.3390/coatings10111013.

Повний текст джерела

Анотація:

This study was focused on measuring the properties of twenty-three commercially available coatings formulated for exterior wood applications. The coatings were characterized by measuring their surface tension, solid content, viscosity, pH, and glass transition temperatures (Tg). Additionally, the wetting properties of coating droplets on wood substrates were measured. The contact angle of solvent-based and water-based coatings were characterized on untreated southern yellow pine wood samples using high-resolution image analysis and the Young–Laplace solution. An innovative image processing tec

Стилі APA, Harvard, Vancouver, ISO та ін.

Pan, Siwei, Yuanyuan Li, Yaohong Zhao, et al. "Design and Synthesis of Low Surface Energy Coating with Functionalized Al2O3 Nanoparticles." Materials 16, no. 22 (2023): 7223. http://dx.doi.org/10.3390/ma16227223.

Повний текст джерела

Анотація:

In a high-moisture environment where dust and coastal saltwater are prevalent, the stability of power equipment can be adversely affected. This issue can result in equipment downtime, particularly for transformers, severely disrupting the continuous operation of DC transmission systems. To address this challenge, a superhydrophobic modified fluorosilicone coating was developed, incorporating anti-stain properties. To tackle this issue comprehensively, an orthogonal experiment was conducted, involving six factors and three levels. The study focused particularly on assessing the impact of water-

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "The tension in the coatings"

Adler, Jeanette. "Film Formation and Surface Tension Studies of Powder Coatings." Thesis, KTH, Fibre and Polymer Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3935.

Повний текст джерела

Анотація:

In industrial use of paint systems a swift processing is crucial. Another very important issue is to improve the quality of the final coating. This report investigates the film formation process of powder coatings, specially the spreading of individual powder particles. The obtained results can be used to understand and control the film formation process. In this way the desired levelling can be achieved and thus the desired gloss or other surface characteristics that may be required. This means that the method could be used when evaluating different polymer and additive combinations that c

Стилі APA, Harvard, Vancouver, ISO та ін.

Stark, Logan Riekio. "Adhesion and Durability of Coatings on Polypropylene Exterior Sidings." DigitalCommons@CalPoly, 2011. https://digitalcommons.calpoly.edu/theses/665.

Повний текст джерела

Анотація:

Plastics have become a universal material for use in a myriad of commercial and consumer products. One such product, exterior siding, is the focus of this project. Although siding products were originally made from wood, vinyl siding, which offered superior performance, was introduced in the 1950’s. More recently, polypropylene (PP) siding has been introduced; PP provides a stronger product, which allows for deeper patterns and better edge detailing. PP siding, compared to traditional wood siding, doesn’t warp, crack, or degrade as easily with extended exposure to the elements, and is cheaper

Стилі APA, Harvard, Vancouver, ISO та ін.

Kolb, William Blake. "The coating of monolithic structures analysis of flow phenomena /." Access abstract and link to full text, 1993. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/9318176.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lyasnikova, A. V., V. M. Taran, O. A. Markelova, O. A. Dudareva, and I. P. Grishina. "Model Operation of the Strength Properties of Ventplant Biocompatible Coatings." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35293.

Повний текст джерела

Анотація:

A special porous coating is applied on the surface of dental implants to improve it`s biocompatibility. During the maintenance the tensions originate in such coatings, which is added to the residual pressure and significantly reduce the strength of the coatings. It is almost impossible to get the numericalled value of these tensions experimentally, so in this article we solve the problem of mathematical model operation of the tension originating in porous coatings in the process of their forming, and in the course of maintenance. When you are citing the document, use the following link htt

Стилі APA, Harvard, Vancouver, ISO та ін.

Carlsson, Karin. "A Study of Failure Development in Thick Thermal Barrier Coatings." Thesis, Linköping University, Department of Management and Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-10397.

Повний текст джерела

Анотація:

Thermal barrier coatings (TBC) are used for reduction of component temperatures in gas turbines. The service temperature for turbines can be as high as 1100ºC and the components are exposed to thermal cycling and gases that will cause the component to oxidize and corrode. The coatings are designed to protect the substrate material from this, but eventually it will lead to failure of the TBC. It is important to have knowledge about when this failure is expected, since it is detrimental for the gas turbine.The scope of this thesis has been to see if an existing life model for thin TBC

Стилі APA, Harvard, Vancouver, ISO та ін.

Veys, Jean-Marie. "Contribution a l'etude de l'influence des revetements protecteurs sur les proprietes mecaniques des superalliages pour aubes cmsx-2 et cotac 784." Poitiers, 1987. http://www.theses.fr/1987POIT2203.

Повний текст джерела

Анотація:

Etude sur les systemes cmsx-2/al-ni, cmsx2/nicocralyta et cotac784/nicocralyta. Influence des parametres tels que: diffusion support-revetement, microstructure, comportement mecanique des revetements sur les proprietes de traction, fluage et fatigue des substrats

Стилі APA, Harvard, Vancouver, ISO та ін.

Dangaran, Kirsten Leigh. "Plasticizer crystallization in whey protein films and coatings : effect on appearance, barrier and tensile properties /." For electronic version search Digital dissertations database. Restricted to UC campuses. Access is free to UC campus dissertations, 2005. http://uclibs.org/PID/11984.

Повний текст джерела

Анотація:

Thesis (Ph. D.)--University of California, Davis, 2005. Degree granted in Food Science. Library does not have original title page. Also available via the World Wide Web. (Restricted to UC campuses)

Стилі APA, Harvard, Vancouver, ISO та ін.

Корнієнко, Анатолій Олександрович. "Формування триботехнічних властивостей композиційних електролітичних покриттів на основі нікелю створенням градієнтних структур. Автореферат дисертації на здобуття наукового ступеня кандидата технічних наук". Thesis, Національний авіаційний університет, 2007. http://er.nau.edu.ua/handle/NAU/35678.

Повний текст джерела

Анотація:

Дисертацію присвячено розробленню градієнтних композиційних електролітичних покриттів зміцнених макро- та наночастинками з керованими триботехнічними властивостями. Проведено аналітичні дослідження напружено-деформованого стану одно- та багатошарових градієнтних КЕП, навантажених силами тертя. Експериментально встановлено оптимальні щодо зносостійкості будову та режими нанесення КЕП Ni-SiC. Визначено вплив кількості та розміру частинок наповнювача на триботехнічні властивості покриттів. Проведенням експериментальних досліджень впливу градієнта будови КЕП на триботехнічні властивості встановлен

Стилі APA, Harvard, Vancouver, ISO та ін.

Donida, Marta Wilk. "Analise das influencias das caracteristicas do solido e da supensão no processo de recobrimento em leito de jorro." [s.n.], 2004. http://repositorio.unicamp.br/jspui/handle/REPOSIP/267695.

Повний текст джерела

Анотація:

Orientador: Sandra Cristina dos Santos Rocha Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Quimica Made available in DSpace on 2018-08-04T01:48:08Z (GMT). No. of bitstreams: 1 Donida_MartaWilk_D.pdf: 11312080 bytes, checksum: bb1dd03e1f1adcf362e6bfcdcf1ba9c5 (MD5) Previous issue date: 2004 Resumo: O recobrimento de partículas em leito de jorro tem aplicações em diversos produtos como comprimidos, cosméticos, alimentos, sementes, fertilizantes, etc. No processo de recobrimento o desempenho é dependente de um conjunto de características do sólido a ser

Стилі APA, Harvard, Vancouver, ISO та ін.

Shayed, M. A., R. D. Hund, and Ch Cherif. "Effect of thermal-resistant polymeric coatings on thermomechanical and topographical properties of glass fiber." Sage, 2015. https://tud.qucosa.de/id/qucosa%3A35611.

Повний текст джерела

Анотація:

Thermal-resistant coatings, based on polysilazane and polysiloxane polymers, were applied onto the glass fiber rovings with the dip-coating method. The coated glass fibers were characterized by performing different experiments to evaluate the effect of coatings on thermomechanical and topographical properties of glass fiber. The effect of temperature on the mechanical properties of the coated rovings were studied and compared with the uncoated rovings. Thermogravimetric analysis was carried out to investigate the thermal stability of coated samples. Scanning electron microscopy and energy-disp

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "The tension in the coatings"

Bhatt, Ramakrishna T. Microstructure and tensile properties of BN/SiC coated Hi-Nicalon, and Sylramic SiC fiber preforms. National Aeronautics and Space Administration, Glenn Research Center, 2001.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bansal, Narottam P. Effects of HF treatments on tensile strength of hi-nicalon fibers. National Aeronautics and Space Administration, Lewis Research Center, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Bansal, Narottam P. Effects of HF treatments on tensile strength of hi-nicalon fibers. National Aeronautics and Space Administration, Lewis Research Center, 1998.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ludwig, Kirschke, and Zick Rolf, eds. Initiation and propagation of cracks in notched unidirectional laminates of carbonfiber-reinforced epoxy under static tensile load. DFVLR, 1986.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zhu, Dongming. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. National Aeronautics and Space Administration, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

1947-, Miller Robert A., and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Inforamtion Program, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Anita, Garg, United States. National Aeronautics and Space Administration., and U.S. Army Research Laboratory., eds. Thermal stability of Hi-Nicalon SiC fiber in nitrogen and silicon environments. National Aeronautics and Space Administration, 1995.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kumar, Kaushik, B. Sridhar Babu, and J. Paulo Davim, eds. Coatings. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-62163-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "The tension in the coatings"

Chowaniec-Michalak, Agnieszka, Sławomir Czarnecki, and Łukasz Sadowski. "Towards the Use of Waste Limestone Powder as a Filler for Epoxy Coatings in Floors: Research on Mechanical Properties." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_36.

Повний текст джерела

Анотація:

AbstractThis paper presents an analysis of the mechanical properties of modified epoxy coatings used as epoxy floors. Waste mineral powder (limestone powder) was used as filler for the epoxy coating. Epoxy resin mixtures were made with waste limestone powder in amounts ranging from 0% to 29% of the mixture mass. Then, four mechanical properties were tested: hardness with the Shore D durometer, tensile and flexural strength with a standard testing machine, and pull-off strength by the pull-off method. The use of waste limestone powder as filler for epoxy coatings resulted in an improvement in h

Стилі APA, Harvard, Vancouver, ISO та ін.

Tricot, Yves-M. "Surfactants: Static and Dynamic Surface Tension." In Liquid Film Coating. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5342-3_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kigle-Boeckler, Gabriele. "Surface Tension Measurement (Ring Method) and Characterization of Coating Materials." In Surface Phenomena and Additives in Water-Based Coatings and Printing Technology. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4899-2361-5_20.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Vigneshwaran, S., R. Palanivel, A. Alblawi, and R. F. Laubscher. "Tensile and Wear Behaviour of MMCs Reinforced with Metallic Particles by Solid-State Technique." In Composite and Composite Coatings. CRC Press, 2022. http://dx.doi.org/10.1201/9781003109723-9.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Podhajny, Richard M. "Surface Tension Effects on the Adhesion and Drying of Water-Based Inks and Coatings." In Surface Phenomena and Fine Particles in Water-Based Coatings and Printing Technology. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3812-7_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hurd, Alan J. "Evaporation and Surface Tension Effects in Dip Coating." In Advances in Chemistry. American Chemical Society, 1994. http://dx.doi.org/10.1021/ba-1994-0234.ch021.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Balokhonov, Ruslan R., and Varvara A. Romanova. "Microstructure-Based Computational Analysis of Deformation and Fracture in Composite and Coated Materials Across Multiple Spatial Scales." In Springer Tracts in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_17.

Повний текст джерела

Анотація:

AbstractA multiscale analysis is performed to investigate deformation and fracture in the aluminum-alumina composite and steel with a boride coating as an example. Model microstructure of the composite materials with irregular geometry of the matrix-particle and substrate-coating interfaces correspondent to the experimentally observed microstructure is taken into account explicitly as initial conditions of the boundary value problem that allows introducing multiple spatial scales. The problem in a plane strain formulation is solved numerically by the finite-difference method. Physically-based

Стилі APA, Harvard, Vancouver, ISO та ін.

Haoyang, Wang, and Liang Lihong. "Damage and Failure Characterization of Nanostructured Ceramic Coatings Under Uniaxial Tensile Loading." In Computational and Experimental Simulations in Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-44947-5_37.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Cakmak, Hulya, and Ece Sogut. "Functional Biobased Composite Polymers for Food Packaging Applications." In Reactive and Functional Polymers Volume One. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43403-8_6.

Повний текст джерела

Анотація:

AbstractBiobased polymers are of great interest due to the release of tension on non-renewable petroleum-based polymers for environmental concerns. However, biobased polymers usually have poor mechanical and barrier properties when used as the main component of coatings and films, but they can be improved by adding nanoscale reinforcing agents (nanoparticles - NPs or fillers), thus forming nanocomposites. The nano-sized components have a larger surface area that favors the filler-matrix interactions and the resulting material yield. For example, natural fibers from renewable plants could be us

Стилі APA, Harvard, Vancouver, ISO та ін.

Shorinov, Oleksandr. "Tensile Stress as a Factor of Deformation and Failure of Thin Films and Coatings." In Integrated Computer Technologies in Mechanical Engineering - 2021. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94259-5_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "The tension in the coatings"

Heymans, Denis, Catherine Romanowska, and Marcelo Herszenhaut. "Novel Isocyanate-Free Resins for 1- and 2K Protective Coatings." In Coatings+ 2019. SSPC, 2019. https://doi.org/10.5006/s2019-00024.

Повний текст джерела

Анотація:

Abstract Environmental, market, and cost pressures have led to the development of alternatives to conventional 2K polyurethane topcoats, including isocyanate-free binders. For example, 1- and 2K coating systems based on alkoxysilane chemistry find increased use in protective coatings. Besides conventional acrylic monomers, polymer chemists have at their disposal various versatile building blocks, such as neoacid derivatives. Neoacid esters are widely used to upgrade solvent- and waterborne resins for both decorative and protective coatings. Among other benefits, these very hydrophobic monomers

Стилі APA, Harvard, Vancouver, ISO та ін.

Yun, Jun Tae, Taek Kyu Kwon, Tae Sung Kang, Kyung Lae Kim, Tae kyu Kim, and Jong Man Han. "A Critical Study on Edge Retention of Protective Coatings for a Ship Hull." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05016.

Повний текст джерела

Анотація:

Abstract The problems of early coating failure, mechanical damages, and the subsequent corrosion at and around edge areas, are a major concern of the ship’s ballast tank. These problems result directly from: exposure to very corrosive conditions, the deficient edge retention caused by surface tension, surface tension gradient, gravity-driven gradients, and coating’s shrinkage during application and the curing. During recent years, there has been an industrial trend towards the development of edge retention ability such as, using high solid or solvent-free coating materials and applying stripe

Стилі APA, Harvard, Vancouver, ISO та ін.

Corbett, William D., and Carly M. McGee. "Slip Coefficient and Tension Creep Testing of Coatings Used in Slip-Critical Bolted Connections." In SSPC 2012 Greencoat. SSPC, 2012. https://doi.org/10.5006/s2012-00010.

Повний текст джерела

Анотація:

Abstract Appendix A of the AISC Specification for Structural Joints Using High Strength Bolts published by the Research Council on Structural Connections describes the testing methods to determine the slip coefficient of coatings used in bolted connections. This paper describes the importance of establishing the slip coefficient of faying surfaces, and presents the “soup-to-nuts” process associated with testing and certifying coatings used in slip-critical connections - from test panel fabrication to surface preparation, coating application (including thinning, thickness and curing variables),

Стилі APA, Harvard, Vancouver, ISO та ін.

Song, Fengmei, Jim Feiger, Jim Lankford, and Junfeng Fang. "Mechanical and Environmental Evaluation of Two Commercial Internal Coatings Used in a 5-Inch Drill Pipe." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09047.

Повний текст джерела

Анотація:

Abstract Pipe internal coatings have been developed and used to improve flow efficiency and corrosion resistance of production lines. Accelerated laboratory tests were performed to evaluate the mechanical and environmental resistances of two commercial coatings used in a 135S 5-inch-OD drill pipe. The parameters evaluated include resistances to torsion, flattening, abrasion, and tension, and resistance of one coating to pipe corrosion in high temperature and pressure brines which: (1) have a high pH, (2) contain CO2, or (3) contain CO2 and H2S. No sign of failure of both coatings was observed

Стилі APA, Harvard, Vancouver, ISO та ін.

Menke, Joseph. "Phosphate Coated Zinc Plating – an Alternative to Cadmium Plating on Fasteners." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02137.

Повний текст джерела

Анотація:

Abstract Alternatives to cadmium plating on fasteners have been evaluated for a number of years. Torque-tension and corrosion resistance characteristics have been the major concerns. Zinc plating has been a popular substitute, but torque-tension at proper preloads on Grade 8 fasteners requires approximately 33 percent more torque. Zinc plating with a supplemental phosphate coating in lieu of the typical supplemental chromate coating was evaluated as an alternative to cadmium plating. Torque-tension and salt spray corrosion resistances were determined for Grade 8 fasteners. Torque-tension tests

Стилі APA, Harvard, Vancouver, ISO та ін.

Bynum, Renee, and Shelley Parkerson-Hoy. "Recent Advances in 2K Waterborne Polyurethane Coatings." In SSPC 2003. SSPC, 2003. https://doi.org/10.5006/s2003-00007.

Повний текст джерела

Анотація:

Abstract This paper highlights new technology for two-component waterborne polyurethane coatings that rivals two-component solventborne coatings for use as maintenance topcoats. Problem issues known to two-component waterborne polyurethane coatings such as viscosity, sag resistance, potlife, foam stabilization and surface tension will be addressed.

Стилі APA, Harvard, Vancouver, ISO та ін.

Rosbrook, T., W. H. Thomason, and J. D. Byrd. "A Review of the Performance of Flame Sprayed Aluminum Coatings Used on Subsea Components." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89624.

Повний текст джерела

Анотація:

Abstract The performance of flame-sprayed aluminum (FSA) coatings on the Hutton Tension Leg Platform after three years of service in submerged, splash zone, and marine atmosphere areas in the North Sea is reviewed. An extensive assessment of the coating was performed when one tendon (consisting of 17 components) was removed after two years and one production riser (13 joints) was removed after three years service. Small blisters had occurred on the vinyl sealed FSA coating of the tension leg elements, but the silicone sealed FSA coating on the risers exhibited no blisters. No corrosion occurre

Стилі APA, Harvard, Vancouver, ISO та ін.

Chung, M. K., C. S. Park, C. H. Lee, and K. K. Baek. "Approaches for Achieving Successful High Build Coatings on Sharp Edges in Ship’S Ballast Tanks." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03010.

Повний текст джерела

Анотація:

Abstract In ship's ballast tanks, most of coating failures (and corrosion attacks) were observed on sharp steel edge, welds seams and weld spatters. To achieve a proper coating film on sharp edges, application of a stripe coat using brushes or roller is often used, whereas alternative methods of mechanical grinding are also employed. This, however, requires high labor cost not to mention of the uncertainly of the final results. One of the possible approaches is to employ high solid coating material having less tendency to flow away from edges after application. With this approach, the need for

Стилі APA, Harvard, Vancouver, ISO та ін.

Kumar, Deepak, Bruce A. Pint, Sebastien Dryepondt, et al. "Performance of Diffusion Aluminide Coatings Applied on Alloy CF8C-Plus at 800°C." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11197.

Повний текст джерела

Анотація:

Abstract High performance cast stainless steel, CF8C-Plus, is a low cost alloy with prospective applications ranging from covers and casings of small and medium size gas turbines to turbocharger housing and manifolds in internal combustion engines. Diffusion aluminide coatings were applied on this alloy as a potential strategy for improved oxidation resistance, particularly in wet air and steam. In this paper the performance of the aluminide coatings evaluated by cyclic oxidation experiments in air containing 10 vol.% H2O at 800°C and conventional tension-compression low-cycle-fatigue tests in

Стилі APA, Harvard, Vancouver, ISO та ін.

Haeberle, Timothy, and Evan J. Dolley. "Effect of Different Strength Levels, Coatings, and Cathodic Charging Levels on the Hydrogen Embrittlement Resistance of AISI 4340 Bolting Material." In CORROSION 2020. NACE International, 2020. https://doi.org/10.5006/c2020-14469.

Повний текст джерела

Анотація:

Abstract AISI 4340 low-alloy steel (UNS G43400) is frequently used for critical bolting applications on subsea equipment in the oil and gas industry because of its ability to be heat treated to high strength levels while maintaining high toughness, even in large diameter bolting. However, several field incidents resulting from hydrogen embrittlement of AISI 4340 bolting have brought into question the maximum hardness that should be specified for low-alloy steel bolting and whether zinc electroplating can contribute to hydrogen embrittlement of low-alloy steel bolting in subsea applications. In

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "The tension in the coatings"

Weiss, Charles, William McGinley, Bradford Songer, Madeline Kuchinski, and Frank Kuchinski. Performance of active porcelain enamel coated fibers for fiber-reinforced concrete : the performance of active porcelain enamel coatings for fiber-reinforced concrete and fiber tests at the University of Louisville. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/40683.

Повний текст джерела

Анотація:

A patented active porcelain enamel coating improves both the bond between the concrete and steel reinforcement as well as its corrosion resistance. A Small Business Innovation Research (SBIR) program to develop a commercial method for production of porcelain-coated fibers was developed in 2015. Market potential of this technology with its steel/concrete bond improvements and corrosion protection suggests that it can compete with other fiber reinforcing systems, with improvements in performance, durability, and cost, especially as compared to smooth fibers incorporated into concrete slabs and b

Стилі APA, Harvard, Vancouver, ISO та ін.

Silverstein, Eva M. Tension is Dimension. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/15068.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yuri Shane. CABLE PULLING TENSION. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/875322.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Marr, Phebe A. Iraq: Troubles and Tension. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada385963.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Jordan, Rachel E., and Jeffrey A. Stark. Capillary Tension in Rotting Ice Layers. Defense Technical Information Center, 2001. http://dx.doi.org/10.21236/ada399589.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Turchi, Patrice A. Viscosity and Surface Tension of Metals. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1438687.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sohn, J. E., J. E. Emerson, P. A. Thompson, and J. T. Koberstein. Rubber-Modified Epoxies: Interfacial Tension and Morphology. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada192464.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Goettler, Richard W. Robust Fiber Coatings. Defense Technical Information Center, 2002. http://dx.doi.org/10.21236/ada407946.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Schulz, Douglas L., Gregory J. McCarthy, Mark Horn, et al. Nanostructured Protective Coatings. Defense Technical Information Center, 2006. http://dx.doi.org/10.21236/ada446194.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chrzan, D. C., M. Dugger, D. M. Follstaedt, et al. Ultrahard Multilayer Coatings. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/7225.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!