Увійти

Готові списки джерел за темами / Themal / Статті в журналах

Статті в журналах з теми "Themal"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Themal.

Автор: Grafiati

Опубліковано: 20 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Themal".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Tian, Yue Chao, Xi Liu, Hui Tang, Jing Long Bu, Dong Mei Zhao, Yue Jun Chen, and Li Xue Yu. "Improvement of Thermal Shock Resistance Performance of High Alumina Ceramic Filter Support." Advanced Materials Research 750-752 (August 2013): 525–28. http://dx.doi.org/10.4028/www.scientific.net/amr.750-752.525.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Mullite-corundum multiphase ceramic materials were prepared at 1400°C for 2h with bauxite chamotte and clay clinker as raw material (size<74 μm), molded at pressure of 50 MPa. Effect of raw materials composition on sintering and themal shock resistance of composite were researched by measurements of apparent porosity, bending strength，thermal shock resistance and thermal expansion rates, and analysed by XRD and SEM. The results showed that the best weigh percentage of raw materials with better sintering and themal shock resistance are bauxite chamotte 50 wt%, clay clinker 50wt% for mullite-corundum multiphase ceramic materials. The test results for high temperature gas cleaning dust removal technology development and the application of the composite ceramic material has important application value.

2

Huang, Yuzhou, Jing Long Bu, Yue Jun Chen, and Zhi Fa Wang. "Research on Mullite-Corundum-Aluminium Titanate Composite." Advanced Materials Research 652-654 (January 2013): 308–11. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.308.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Mullite-aluminium titanate-corundum composite was prepared at 1300°C with refractory clay, aluminium titanate and high alumina grog as raw material, molded at pressure of 50MPa. Effect of raw material ratio on sintering and themal shock resistance of the mullite-aluminium titanate-corundum composite was researched by measurements of apparent porosity, bending strength and residual strength after water-cool, and analyses of XRD and SEM. The results showed that as refractory clay content, apparent porosity of samples decrease, bulk density and bending strength increase. When the weight ratio of refractory clay, aluminium titanate and high alumina grog is 60/10/30, themal shock resistance of sample is excellent, The XRD and SEM analysis results indicated that the mechanical and thermal proprieties are relative to the microstructure and crystal phases of the composite materials.

3

Tkeuchi, Tetsuya, Yusuke Hirose, Ryoma Tsunoda, Fuminori Honda, and Rikio Settai. "Themal Expansion and Magnetostriction of YbAuCu4." Physics Procedia 75 (2015): 460–67. http://dx.doi.org/10.1016/j.phpro.2015.12.057.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Zhao, Ying Na, Gang Chang, Gang Liu, Hai Bo Song, and Wen Li Zhang. "Preparation of Mullite-Aluminum Titanate-Cordierite Multiphase Ceramics." Advanced Materials Research 750-752 (August 2013): 484–87. http://dx.doi.org/10.4028/www.scientific.net/amr.750-752.484.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Mullite-aluminum titanate-cordierite multiphase ceramics were prepared by high alumina clinker, Aluminum Titanate and Cordierite. The sintering property and thermal shock resistance of composite materials were tested. The experimental results show that the sinter property and themal shock resistance of Mullite-aluminum titanate-cordierite multiphase ceramics are relatively preferably, which the materials composition are 30 wt.% high alumina clinker, 60 wt.% cordierite and 10 wt.% aluminum titanate. The component samples show porosity of 33.17%, volume density 1.9 % and normal temperature flexural strength 20.66 MPa. Thermal residual flexural strength of the samples is still as high as 10.29 Mpa by 5 times thermal residual tests, and there are only little flexural strength lower after three times earthquake test.

5

Xiaoke, Du, and Lou Ke. "A Simulation Platform for Vehicle Themal Management System." Journal of Physics: Conference Series 1325 (October 2019): 012008. http://dx.doi.org/10.1088/1742-6596/1325/1/012008.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Guo, Zhi Hong, Zhen Xi Wen, Qing Yan Xu, Yuan Tian, Gao Qiu, and Yi Min Wang. "Study on Themal and Rheological Properties of POM." Advanced Materials Research 487 (March 2012): 192–97. http://dx.doi.org/10.4028/www.scientific.net/amr.487.192.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Polyoxymethylene is a linear polymer with excellent performance due to its chemical structure and high crystallinity. The thermal and rheological properties of POM are investigated in this paper. Experimental results indicate that the melting point and decomposition temperature of POM are about 162 °C and 266 °C respectively. POM melt is a non-Newtonian fluid, the apparent viscosity gradually decreased with the increase of shear rate, showing a typical shear-thinning behavior. Non-Newtonian index increased from 0.53 to 0.61 as the melt temperature increased from 190 °C to 230 °C. The flow activation energy of POM melt is between 11.36 and 24.90 kJ/mol within the shear rate range of 90~2500s -1.

7

KATSUTA, Masafumi. "Some Aspects on the Themal Device using Phase Change." Reference Collection of Annual Meeting VIII.02.1 (2002): 310–11. http://dx.doi.org/10.1299/jsmemecjsm.viii.02.1.0_310.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Bandai, Hiroyuki, Masaki Morita, Masaki Watanabe, and Makoto Kobashi. "Advanced Themal Storage System and Material Development For Vehicles." Proceedings of the National Symposium on Power and Energy Systems 2016.21 (2016): D232. http://dx.doi.org/10.1299/jsmepes.2016.21.d232.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Liang, Yu Fei, and Zhen Hua Xue. "Effect on the Thermal Value and Inner Instructure of Biomass under Different Torrefaction Condiction." Advanced Materials Research 807-809 (September 2013): 795–99. http://dx.doi.org/10.4028/www.scientific.net/amr.807-809.795.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Torrefaction was a main pretreatment technology for improving the properties of biomass in order to deal with such problems as dispersed resource,High moisture content, High bulk volume and low heating value. This paper discussed torrefied temperature, time on thermal and infrared spectrum curve effect of Salix baking carbonand analysed DSC curve of Salix torrefied coal. The resultsshowed that the themal value was higher, with the temperature was increasing faster and the timewas longer, Meanwhile, the number of solid oxygencontaining functional groups in the solid product reduced.The significantly decreasing of the oxygen content improved the heat value of solid products.orrefaction was benefit to the improvement of energy property and material characteristicsof biomass and had a positive effect on the quality of biomass material．

10

Maltsev, A. A. "QUALITY CONTROL AND RELIABILITY OF LEDS IN SCATTER THEMAL PARAMETERS." Scientific and Technical Volga region Bulletin 6, no. 6 (December 2016): 86–88. http://dx.doi.org/10.24153/2079-5920-2016-6-6-86-88.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

MIYAZAKI, Takeshi, Masaki OOMIYA, Hirotsugu INOUE, Kikuo KISHIMOTO, and Masazumi AMAGAI. "Evaluation of Fatigue Strength for Solder Joints after Themal Aging." Proceedings of the 1992 Annual Meeting of JSME/MMD 2004 (2004): 253–54. http://dx.doi.org/10.1299/jsmezairiki.2004.0_253.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Wang, Moo-Chin, and Min-Hsiung Hon. "Properties and crystallization of Li2O–CaO–Al2O3–SiO2–TiO2glasses." Journal of Materials Research 8, no. 4 (April 1993): 890–98. http://dx.doi.org/10.1557/jmr.1993.0890.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The addition of CaO to Li2O–Al2O3–SiO2–TiO2(LAST), forming the Li2O–CaO–Al2O3–SiO2–TiO2(LCAST) system, is used in the preparation of low themal expansion coefficient glass-ceramics. By a progressive weight percent substitution of CaO for SiO2, at constant ratios of concentration of Li2O, Al2O3, and TiO2, a number of properties of these glasses have been studied. The results indicated that these thermal properties increased progressively with increasing CaO concentration. X-ray diffraction analysis was utilized to identify the crystalline phase in glass-ceramics of the Li2O–CaO–Al2O3–SiO2-TiO2system. Thed-spacings of the major crystallites were precisely measured and fitted with those of β-spodumene. The minor crystalline phase of titanite, CaO · TiO2· SiO2, was also present. The average thermal expansion coefficients from 25 to 700 °C were 3.50 × 10−6/°C, 3.81 × 10−6/°C, and 3.91 × 10−6/°C for samples A, B, and C, respectively.

13

Han, Rong Jiang, Dan Gao, and Ke Zheng Chen. "Y₃Al₅O₁₂ Nanocrystallites Prepared from a Novel Crystalline Precursor." Advanced Materials Research 306-307 (August 2011): 1142–47. http://dx.doi.org/10.4028/www.scientific.net/amr.306-307.1142.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

A novel crystalline precursor for preparing Y3Al5O12 (YAG) nanocrystallite was synthesized via a co-precipitation method using (NH4)2CO3 solution as the precipitator. The precursor was characterized by means of powder X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), thermal gravimetry (TG), differential thermal gravimetry (DTG) and differential scanning calorimetry (DSC), respectively. The empirical chemical formula of the crystalline precursor can be expressed as 5[(NH4)2Al6(CO3)3(OH)14]×9[Y2(CO3)3×3H2O] according to the test results. The measured weight loss of 46.7% of the precursor without consideration of the absorbed water is in accord with the calculated value of 47.5% according to the above empirical formula. The phase-pure YAG nanocrystallites were obtained by calcining the above precursors at 900°C for 2 hours in air atmosphere. Transmission electronic microscopy (TEM) result showed that the particle size of YAG nanocrystallites is 40-80 nm. The mechanism of themal decomposition of the crystalline precursor was also presented.

14

Kubo, Gai, Tetsuya Matsuda, Hiroma Nagaoka, and Yoshihiko Sato. "Development and Validation of Multiscale Thermo-Elasto-Viscoplastic Analysis Method for Plain-Woven Composites." Key Engineering Materials 794 (February 2019): 78–88. http://dx.doi.org/10.4028/www.scientific.net/kem.794.78.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In this study, the analysis method for thermomechanical properties of plain-woven composites is developed, and applied to thermoelastoviscoplastic analysis of plain-woven glass fiber-reinforced plastic (GFRP) composites. For this, a time-dependent constitutive equation depending on temperature for matrix materials is incorporated into the micro/meso/macro-scale thermo-elastic homogenization method for plain-woven composites developed by our research group. This method enables us to analyze thermoelastoviscoplastic properties in not only fiber bundles but also fibers and matrix materials in fiber bundles, as well as macroscopic thermal properties. This method is then applied to the thermal expansion analysis of a plain-woven GFRP composite subjected to a macroscopic temperature change from 25°C to 80°C before it is cooled to 25°C. Comparing the analysis results with experimental data, we validate the present method. It is also shown that the present method can evaluate themal residual stress and strain in the composite.

15

Ji-Hong, Sun, Gong Yan-Jun, Fan Wen-Hao, Wu Dong, and Sun Yu-Han. "Themal Physical Chemical Characteristics of SiO₂-PEG Xerogels." Acta Physico-Chimica Sinica 15, no. 06 (1999): 517–21. http://dx.doi.org/10.3866/pku.whxb19990607.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

KAWAMURA, Masashi, Hideki OKADO, Koji NISHIO, and Kenji SUZUKI. "Effect of Interface Roughness on Internal Stress of Ceramic Themal Barrier Coating." Journal of the Society of Materials Science, Japan 53, no. 9 (2004): 1019–23. http://dx.doi.org/10.2472/jsms.53.1019.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Zhou, Feng, Ying Qing Fu, and Kai Ming Liang. "Crystallization Kinetics of Li⁺-Doped TiO₂ Films Prepared by Sol-Gel Dip Coating." Advanced Materials Research 105-106 (April 2010): 750–53. http://dx.doi.org/10.4028/www.scientific.net/amr.105-106.750.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The crystallization behavior and microstructure of Li+-doped TiO2 thin films prepared by sol-gel dip coating were investigated by means of differential themal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The crystallization apparent activation energy (E) both in the absence and in the presence of Li+ ion was also measured with Kissinger method. As a result the E values of Li+-doped TiO2 thin film were decreased, thus the crystallization of non-crystalline to anatase and antase to rutile was promoted.

18

Cui, Xiao Ling, Xin Ming Shi, and Shi You Li. "Synthesis and Properties of Novel Asymmetrical Porphyrin with [p-(4-Flourobenzoyloxy)-M-Ethyloxy]phenyl and its Lanthanide Complexes." Advanced Materials Research 308-310 (August 2011): 643–46. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.643.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

A series of lanthanide complexes with acetylacetonate and a new asymmetrical 5-[p-(4-fluorobenzoyloxy)-m-ethyloxy]phenyl-10,15,20-triphenylporphyrin were prepared and characterized by elemental analyses, molar conductance, UV-Vis, IR, 1H NMR, luminescence spectra and themal analysis. Quantum yields of Q band fluorescence are in the region 0.073-0.097 at room temperature. Complexes have higher stability (decompose until 211°C). The structure that both the porphyrin behaved as a tetradentate ligand and acetylacetonate as a bidentate ligand are coordinated to a rare earth ion also has been proposed.

19

SUGIMOTO, Yoshikazu, Kiyofumi OKADA, and Yuichiro SUZUKI. "Petrographic Changes in Compaction Themal Treatment of Recent Plant Materials, Peat and Coals." Journal of the Japan Institute of Energy 78, no. 3 (1999): 201–10. http://dx.doi.org/10.3775/jie.78.201.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

TANNO, Masatoshi, Toshiki KATO, Kazuhiro OGAWA, and Tetsuo SHOJI. "Improvement of Bond Strength for Interface Between Themal Barrier Coating and Bond Coating." Proceedings of the JSME annual meeting 2002.2 (2002): 223–24. http://dx.doi.org/10.1299/jsmemecjo.2002.2.0_223.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Henkel, Daniel P. "Themal spray and adhesive bonding of optical fibres to high-temperature compsie materials." Advanced Materials for Optics and Electronics 4, no. 5 (September 1994): 327–35. http://dx.doi.org/10.1002/amo.860040503.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Koval, T. V., I. V. Lopatin, and Nguyen Bao Hung. "Research on modes of plasma generation in low-pressure discharge for themal radiation processes." IOP Conference Series: Materials Science and Engineering 81 (April 23, 2015): 012056. http://dx.doi.org/10.1088/1757-899x/81/1/012056.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Li, Ming Ya, Jian Min Wang, Jing Guo, Yue Liu Li, and Xiao Qiang Wang. "Fabrication of Highly Ordered Arrays of TiO₂ Nanotubes on Ti Wires." Advanced Materials Research 624 (December 2012): 63–66. http://dx.doi.org/10.4028/www.scientific.net/amr.624.63.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Highly Ordered arrays of TiO2 nanotubes on Ti wire were prepared by anodic oxidation with ethylene glycol solution of NH4F electrolyte. The phase compositions of the samples were characterized using X-ray diffraction (XRD) analysis using Cu-Kα radiation. The microstructure was observed using scanning electron microscopy (SEM). Experimental results show that at the anode condition of 95V, 50°C, and then themal treatment at 550°C, the highly ordered anatase TiO2 nanotubes arrays arranged on the surface of Ti wire. The length of the nanotube achieved was about 31μm, the internal diameter and outer diameter of the nanotube was 127nm and 170nm, respectively.

24

Kim, Dong-Joon, Seung-Goo Kang, Young-Jin Kwon, Jae-Young Lee, and Kazunori Harada. "An Experimental Study on the Themal Properties of High Strength Concrete Exposed to High Temperature." Journal of Korean Society of Hazard Mitigation 12, no. 6 (December 31, 2012): 87–92. http://dx.doi.org/10.9798/kosham.2012.12.6.087.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

MIYAMOTO, AKIRA, MASAMI SAKURADA, TSUNENORI ARAI, KYOICHI MIZUNO, AKIRA KURITA, HARUO NAKAMURA, and MAKOTO KIKUCHI. "Efficacy of carbon monoxide laser in selectively intimal themal welding: Implications for laser balloon angioplasty." Japanese Circulation Journal 57, no. 8 (1993): 825–31. http://dx.doi.org/10.1253/jcj.57.825.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Dutartre, D., P. Warren, I. Berbezier, and P. Perret. "Low temperature silicon and Si1−xGex epitaxy by rapid themal chemical vapour deposition using hydrides." Thin Solid Films 222, no. 1-2 (December 1992): 52–56. http://dx.doi.org/10.1016/0040-6090(92)90037-c.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Xu, Hong Yan, Xing Tong Chen, and Ai Hong Guo. "Thermal and Hydrothermal Stability of Al-Pillared Rectorites." Advanced Materials Research 178 (December 2010): 314–17. http://dx.doi.org/10.4028/www.scientific.net/amr.178.314.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Al-pillared rectorites (Al-REC) were synthesized from naturally occurring rectorite through exchange of interlamellar ions with hydroxyalumina polycations. Furthermore, Powder X-ray diffraction (XRD), Nitrogen adsorption-desorption isotherms, and Transmitting electronic microscopy (TEM) were applied in order to study the themal stability and hydrothermal stability of pillared materials. The Al-REC are thermally stable up to 800 °C. X-ray diffractograms of Al-REC calcined at 800 °C show a sharp and intense d001 peak, corresponding to a basal spacing of 2.75nm. In a 100% steam flow under atmospheric pressure at 800 °C for 20h, the characteristic d001 spacing of Al-REC decreases from 2.74 to 2.52nm, the sharp and intense d001 peak is still observed. And micropore area, mesopore volume and micropore volume retain 62, 33 and 67%, respectively, which affirms that this pillared clay has exceptional hydrothermal stability.

28

Sulistiowati, Ni Made Dian, Wayan Nata Septiadi, and Luh Putu Nopriani. "ANXIETY LEVEL ANALYSIS OF NURSING STUDENT WHO TOOK OBJECTIVE STRUCTURED CLINICAL EXAMINATION (OSCE) USING FACE TEMPERATURE DISTRIBUTION BASED ON THERMAL IMAGING." INDONESIAN NURSING JOURNAL OF EDUCATION AND CLINIC (INJEC) 2, no. 1 (August 31, 2017): 44. http://dx.doi.org/10.24990/injec.v2i1.134.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Background and Purpose: The condition that a person experiences stress can affect the function of various organ systems of the body, especially the cardiovascular system. Manifestations of prolonged stress can turn into anxiety. This study aims to determine differences in temperature distribution in the face of students who experience anxiety facing the OSCE.Method: This research method using pre-experimental design where samples are experiencing anxiety seen temperature distribution in the face area by using thermal imaging. The sample was selected using total sampling technique in which as many as 81 students were undergoing tests OSCE is used as a sample in this study. The instrument used to measure the level of anxiety is the GAD 7, consists of seven items given questions prior to the measurement of temperature using thermal imaging.Results: The results obtained are subjected to mild anxiety as much as 49 respondents where the frontal head temperature measurement that 23 people was febrile, 22 people was normal and 4 people was hypothermia. While the results of the temporal head measurement that 27 people was febrile, 20 people was normal, and 2 people was hypothermia.Conclusion and recommendation: There is a difference in temperature at each level of anxiety as measured by the temperature of the temporal and frontal. Therefore, it needs to be investigated further there a change in temperature by measuring themal imaging, after the addition of interventions for coping with anxiety.

29

OKAZAKI, Masakazu, Akira IKADA, and Yasuhiro YAMAZAKI. "Evolution of Macroscopic and Microscopic Themal Cycle Damages in SP700/SCS-6 Titanium Alloy Matrix Composite." Journal of the Society of Materials Science, Japan 54, no. 3 (2005): 271–78. http://dx.doi.org/10.2472/jsms.54.271.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

ISHIHARA, Masayuki, Naotaka NODA, and Yoshihiro OOTAO. "OS0110 Analysis of the Natural Frequencies of a Circular Saw Subjected to Themal Loads and Tensioning." Proceedings of the Materials and Mechanics Conference 2009 (2009): 89–91. http://dx.doi.org/10.1299/jsmemm.2009.89.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Kim, Jeong-Ho, Ki-Uk Kwon, and Yong-Han Yoon. "A Comparative Analysis Themal Comfort Index According to the Maximum Temperature School Outdoor Space Green Characteristics." Journal of Korea Society for Plants People and Environment 18, no. 5 (October 30, 2015): 363–70. http://dx.doi.org/10.11628/ksppe.2015.18.5.363.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Nakayama, Kazuyuki, Masaru Ishizuka, and Shinji Nakagawa. "Themal performance of forced air cooled BGA in the enclosure(Effect of volume porosity in the enclosure)." Proceedings of the JSME annual meeting 2003.6 (2003): 247–48. http://dx.doi.org/10.1299/jsmemecjo.2003.6.0_247.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Chen, Qiao, Yongchao Ma, Beining Qi, Tingfeng Zhang, Lili Wang, Jinsheng Shi, and Xuefang Lan. "Z-scheme Bi/AgBiS2/P25 for enhanced CO2 photoreduction to CH4 and CO with photo-themal synergy." Applied Surface Science 555 (July 2021): 149648. http://dx.doi.org/10.1016/j.apsusc.2021.149648.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Fadodun, Olatomide G., Adebimpe A. Amosun, Johnson A. Ogundeji, and David O. Olaloye. "Numerical Investigation of Themal Efficiency and Pumping Power of Al2O3/H2O Nanofluid in Pipe Using Response Surface Methodology." Journal of Nanofluids 8, no. 7 (July 1, 2019): 1566–76. http://dx.doi.org/10.1166/jon.2019.1696.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Xu, Hong Yan, and Xing Tong Chen. "A Thermal Study of Al-Pillared Montmorillonites." Advanced Materials Research 187 (February 2011): 112–16. http://dx.doi.org/10.4028/www.scientific.net/amr.187.112.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Al-pillared montmorillonites (Al-MMT) were synthesized from naturally occurring sodium montmorillonite through exchange of interlamellar ions with hydroxyalumina polycations. Furthermore, Powder X-ray diffraction (XRD), Fourier transformation infra-red spectra (FTIR), Thermogravimetric analysis (TG), and differential scanning calorimetry (DSC) were applied in order to study the themal stability, hydrothermal stability and synthesis mechanisms of pillared materials. The Al-MMT are thermally stable and hydrothermal stability up to700°C. X-ray diffractograms of Al-MMT calcined at 700 0C show a sharp and intense d001 peak, corresponding to a basal spacing of 1.66nm. Until calcinations at 8000C, the pillared clays generally retain their structural ordering as evidenced by a broad basal (001) peak, which is an indication that the layer structure lost some long-range ordering. In a 100% steam flow under atmospheric pressure at 7000C, the characteristic d001 spacing of Al-MMT decreases from 1.83nm to 1.71nm, intensity of basal peak reduced by58%. However, after hydrothermal at 8000C, the basal (001) peak is not observed, indicating a complete structural collapse. Synthesis mechanisms for Al-MMT are established. Some of tetrahedral silicons or aluminums inverse towards gallery to react with pillaring agents and yield Alp-O-AlsⅣ or Alp-O-Sis bridges which would firmly fix the pillars to the host clay.

36

Zhang, Jia Min, Ming Yi Zhu, and Zhao Xun Lian. "Study on Reactive Blend Systems of PA1010/ABS/PP." Advanced Materials Research 239-242 (May 2011): 3146–49. http://dx.doi.org/10.4028/www.scientific.net/amr.239-242.3146.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The impacts of multi-monomers melt grafting blends of maleic anhydride(MAH) and Styrene (St) on the crystallization behavior, morphology and mechanical properties of PA1010/ABS/PP blends were studied through the methods of SEM,themal analysis, mechanical properties analysis. The results showed that the graft copolymer generated in situ by the anhydride groups of g-PP and the amino end of PA1010 reduced the interfacial tension of blends efficiently, and the interaction of the styrene groups of the graft copolymer and ABS is helpful to improve the compatibility of three components during the melt blending process. The size of dispersed phase in blends is reduced obviously and the mechanical properties have a great improvement when the percentage of g-PP in the PA1010/ABS/PP blends increases to 10%. The tensile strength of the compatibilized PA1010/ABS/PP blends is improved by 11.7%,and the impact strength and elongation at break are increased 4 times and 4.9 times, respectively.

37

Brazerol, William F., Andrew J. McPhee, Stephen A. Estes, and Reginald C. Tsang. "1197 RESPONSE OF VITAMIN D METABOLITES TO CHRONIC SUBERY THEMAL ULTRAVIOLET B (SE UVB) EXPOSURE IN BLACKS VS WHITES." Pediatric Research 19, no. 4 (April 1985): 310A. http://dx.doi.org/10.1203/00006450-198504000-01227.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Hoover, R., D. Hannouz, and F. W. Sosulski. "Effects of Hydroxypropylation on Themal Properties, Starch Digestibility and Freeze-Thaw Stability of Field Pea (Pisum sativum cv Trapper) Starch." Starch - Stärke 40, no. 10 (1988): 383–87. http://dx.doi.org/10.1002/star.19880401005.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Henschel, Jonas, Julia Monika Dressler, Martin Winter, and Sascha Nowak. "Reaction Product Analyses of the Most Active “Inactive” Material in Lithium-Ion Batteries—The Electrolyte. I: Themal Stress and Marker Molecules." Chemistry of Materials 31, no. 24 (November 19, 2019): 9970–76. http://dx.doi.org/10.1021/acs.chemmater.9b04133.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

WANG, XINCHANG, ZHIZHEN YE, JUNHUI HE, JINGYUN HUANG, and BINGHUI ZHAO. "GROWTH AND CHARACTERIZATION OF C-ORIENTED LiNbO3 THIN FILMS ON Si (100) BY PLD." International Journal of Modern Physics B 16, no. 28n29 (November 20, 2002): 4343–46. http://dx.doi.org/10.1142/s0217979202015406.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Lithium niobate ( LiNbO 3) thin film is an important material for optical waveguide. Recently, particular attention has been paid to the application of LiNbO 3 (LN) thin films. To develop and fabricate integrated optical devices, the growth of thin LN epitaxial films onto silicon substrate is of great importance and particularly attractive. In this paper, LN thin film was grown by pulsed laser deposition (PLD). Stoichiometric LN ceramic is used as a target. Amorphous SiO 2 buffer layer was coated on Si (100) wafer by in-situ themal oxidation before the deposition. The optimized condition of growing LN film on Si (100) by PLD is found: O 2 pressure 30 Pa, substrate temperature 600°C. Only (006) reflection of LN was observed besides the (002) reflection of silicon substrate from XRD pattern. The FWHM (~0.21°) of (006) reflection peak is much narrower than the value reported by Lee [1]. The results of XRD measurement indicate that the LN film was epitaxially grown along the c-axis. Transmission electron microcopy (TEM) patterns confirm that the film has superior crystalline quality. The optical waveguiding properties of the films were demonstrated by a prism coupler method. Fully c-oriented thin film could be grown on silicon substrate by PLD without the buffer layer and the induced electric field.

41

Yadav, Ramkumar, and Anoj Meena. "Comparative study of thermo-mechanical and thermogravimetric characterization of hybrid dental restorative composite materials." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236, no. 5 (January 21, 2022): 1122–29. http://dx.doi.org/10.1177/14644207211069763.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

The purpose of the study is to create resin-based micro-nano particulates-filled dental restorative composite materials and investigate the influence of variable nano-hydroxyapatite filler concentration on their thermo-mechanical and thermogravimetric properties. Two series were created by combining silane treated nano-hydroxyapatite filler particles (wt.% of 0, 2, 4, 6, and 8) with foreign ceramic particles (alumina and titanium oxide). Each series consists of five compositions. For each dental composition, the amount of foreign ceramics (20 wt.%) remained constant. The dental composite samples were polymerized for 30 s on each side using a blue LED light. Thermo-mechanical and thermogravimetric analysis was performed at various temperatures range. At preliminary temperatures (30–40°C), the hybrid nano-hydroxyapatite-TiO2 dental composite filled with 8 wt.% nano-hydroxyapatite exhibited storage modulus (about 90 MPa) whereas nano-hydroxyapatite-Al2O3 dental composite filled with 8 wt.% nano-hydroxyapatite exhibited storage modulus (about 260 MPa). Themal stability of nano-hydroxyapatite-Al2O3 and nano-hydroxyapatite-TiO2 dental composite was 99.90% and 99.82% at 90°C, respectively. The glass phase, glass transition phase, and rubbery phase were observed at various temperatures. From the results, it revealed that Al2O3-nano-hydroxyapatite filled dental composite was observed significant than TiO2–nano-hydroxyapatite filled dental composite.

42

Lam Thi, Hang, Thang Luong Cao, Mai Vu Thanh, Hung Nguyen Manh, Oanh Le Thi Mai, and Bich Do Danh. "Influence of temperature and time on structure, physical properties and photocatalytic ability of g-C\_3N\_4 synthesized through urea themal polymerization in an air atmosphere." Journal of Science Natural Science 65, no. 3 (March 2020): 66–74. http://dx.doi.org/10.18173/2354-1059.2020-0008.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

NOMURA, Masato, and Yoshihito FUJIHARA. "Studies on the decomposition of terpenes in the presence of synthetic zeolites. VIII. Themal decomposition reaction of isolongifolene oxide and .BETA.-caryophyllene oxide in the presence of synthetic zeolites." NIPPON KAGAKU KAISHI, no. 7 (1989): 1166–68. http://dx.doi.org/10.1246/nikkashi.1989.1166.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

MURAMATSU, Yoshiki, and Seiji KURODA. "Examination of the Debonding Behavior of Themal Sprayed Coatings by Local Heating on Substrate Plate. Application of the Laser Speckle Method to Strain Measurement in the Welding Process. Report 4." QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 20, no. 2 (2002): 287–94. http://dx.doi.org/10.2207/qjjws.20.287.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Maina, Paul, and Zongjie Huan. "Effects of various parameters on the efficiency of a CO2 heat pump: a statistical approach." Journal of Thermal Engineering 1, no. 21337 (April 1, 2015): 236–78. http://dx.doi.org/10.18186/thermal.228874.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Ünal, Şaban. "An Experimental Study on a Bus Air Conditioner to Determine its Conformity to Design and Comfort Conditions." Journal of Thermal Engineering 3, no. 1 (December 12, 2016): 1089. http://dx.doi.org/10.18186/thermal.277288.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Heidarnejad, Parisa. "Exergy Based Optimization of a Biomass and Solar Fuelled CCHP Hybrid Seawater Desalination Plant." Journal of Thermal Engineering 3, no. 1 (January 1, 2017): 1034. http://dx.doi.org/10.18186/thermal.290251.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Lemington, Nasruddin. "Study of Solar Driven Adsorption Cooling Potential in Indonesia." Journal of Thermal Engineering 3, no. 1 (January 1, 2017): 1044. http://dx.doi.org/10.18186/thermal.290257.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Balotaki, H. Kavoosi. "Experimental Investigation of Dual-Purpose Solar Collector using with Rectangular Channels." Journal of Thermal Engineering 3, no. 1 (January 1, 2017): 1052. http://dx.doi.org/10.18186/thermal.290258.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Coşkun, Turgay. "The Importance of Internal Heat Gains for Building Cooling Design." Journal of Thermal Engineering 3, no. 1 (January 1, 2017): 1060. http://dx.doi.org/10.18186/thermal.290260.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.