Увійти

Готові списки джерел за темами / Thread injection

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Thread injection"

Автор: Grafiati

Опубліковано: 10 січня 2023

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Thread injection".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Thread injection"

1

Molina, Gustavo Otoboni, Joze Fabiana Garcia Molina, Sheila Soratto Zeferino Nandi, and Eduarda Braz. "DESCRIPTION OF CUSTOM THREAD IGM TECHNIQUE WITH USE OF PDO FACIAL SUPPORT THREADS IN THE OROFACIAL HARMONIZATION." Journal of Research in Dentistry 9, no. 2 (2021): 10. http://dx.doi.org/10.19177/jrd.v9e2202110-17.

Повний текст джерела

Анотація:

The aim of this article was to describe a thread lifting procedure used for face lifting and skin rejuvenation, developed by the Doctor Molina Dental Institute (IGM, in the Portuguese acronym), termed “IGM custom thread technique” that has shown excellent results in facial tissue repositioning for facial harmonization. In this study, rather than presenting the results, we have described and discussed the proposed custom thread injection technique.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Yang, Yang, Xin Zhang, and Hong Feng Zhang. "Design of Injection Mould with Thread Automatic Demoulding Mechanism for Focusing Handwheel." Advanced Materials Research 557-559 (July 2012): 1340–43. http://dx.doi.org/10.4028/www.scientific.net/amr.557-559.1340.

Повний текст джерела

Анотація:

According to the characteristics of threaded plastics in the focusing handwheel of the light machine, a kind of new type injection mould is designed to take off thread. The mould core consists of six flaps and a guide posts, and the whorl is taken off automatically through the relative motion by guide posts and flap. The injection mould effectively avoids the interference effect in the course of taking off thread. The productivity is increased effectively, and the stable plastics quality is kept in practical application.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Dadhaniya, Ravikumar R., Santosh Ghoti, Akshay Dudhanale, and Amrendra Singh. "Modified thread technique, 2 threads 7 days in cases of wrist ganglions: a case series." International Journal of Research in Orthopaedics 11, no. 1 (2024): 208–12. https://doi.org/10.18203/issn.2455-4510.intjresorthop20243910.

Повний текст джерела

Анотація:

Ganglion cysts are soft tissue swellings occurring most commonly in the hand or wrist, they are usually asymptomatic. The 70% cases of ganglion are observed on the dorsal side of wrist. Ganglion cysts arise from mesenchymal cells at the synovial capsular junction as a result of the continuous micro-injury. Ganglion cysts have a recurrence rate of approximately 15% to 20%. Gang et al introduced the technique of treating ganglion by passing a silk thread to induce chronic inflammation leading to obliteration of the cyst. Three cases with wrist swelling without tenderness. On examination swelling

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Jeong, Tae Kwang, Chang Ho Chung, and Kyung Hee Min. "Multi-modal treatment strategy for achieving an aesthetic lower face." Archives of Plastic Surgery 47, no. 3 (2020): 256–62. http://dx.doi.org/10.5999/aps.2019.01830.

Повний текст джерела

Анотація:

Background Most women consider an oval-shaped face to be youthful and beautiful. In recent years, demand has grown for surgical procedures with a shorter downtime and fewer complications. These minimally invasive procedures include botulinum toxin type A (BoNTA) injection, filler injection, suction-assisted liposuction (SAL), laser-assisted lipolysis (LAL), thread lifting, and fat grafting. This study aims to introduce an effective method for creating an aesthetically pleasing lower face using a combination of minimally invasive procedures.Methods From March 2017 to March 2019, 94 patients sim

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Peng, Jui-Hui, and Peter Hsien-Li Peng. "HA Filler Injection and Skin Quality–Literature Minireview and Injection Techniques." Indian Journal of Plastic Surgery 53, no. 02 (2020): 198–206. http://dx.doi.org/10.1055/s-0040-1715545.

Повний текст джерела

Анотація:

AbstractAging of the face produces many changes in the structure and integrity of the skin and other anatomical aspects, the three major signs of which are volume loss, sagginess, and skin quality change. Through surgical or nonsurgical procedures, it is possible to slow or even reverse these mechanisms through artificial means, including thread lifting, radiofrequency, or filler injection. Filler injections are particularly popular in recent years, owing to their convenience, efficacy, and long-lasting results. In this minireview, the author outlines the basic mechanisms behind facial aging,

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Serov, D. N., and L. A. Rubtsova. "Usage of thread implantology and injection technologies in cosmetology." Medical alphabet, no. 5 (April 30, 2023): 7–10. http://dx.doi.org/10.33667/2078-5631-2023-5-7-10.

Повний текст джерела

Анотація:

For the past years, there have been lots of minimal invasive methods developed regarding to the anti-aging therapy, and, according to practical experience, many of them can be safely and effectively combined. Complex approaches in patients’ treatment allow to achieve the most optimal results. In this work we described issues of effective combinations of thread implantology and injection technologies, safety of these combinations, performance efficacy and algorithms for the case management.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Park, Sang-LL, Seung-Jae Lee, Geuk-Sang You, and Jung-Chun Suh. "An Experimental Study on Tip Vortex Cavitation Suppression in a Marine Propeller." Journal of Ship Research 58, no. 03 (2014): 157–67. http://dx.doi.org/10.5957/jsr.2014.58.3.157.

Повний текст джерела

Анотація:

Normally, tip vortex cavitation (TVC) is first observed at a certain location behind the tips of propeller blades. Therefore, TVC is important for naval ships and research vessels that require raising the cavitation inception speed to maximum possible values. The concepts for alleviating the tip vortex are summarized by Platzer and Souders (1979), who carried out a thorough literature survey. Active control of TVC involves the injection of a polymer or water from the blade tip. The main effect of such mass injection (both water and polymer solutions) into the vortex core is an increase in the

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Wang, Jian-Jun, Xiao-Feng Sui, Shan-Po Jia, Zhong-Zhi Hua, and Si-Yao Wang. "Experimental Study on Sealing Failure Mechanism of Injection-Production String in Underground Gas Storage under Cyclic Loading." Advances in Materials Science and Engineering 2022 (August 25, 2022): 1–14. http://dx.doi.org/10.1155/2022/5206149.

Повний текст джерела

Анотація:

In order to clarify the impact of cyclic loading on the mechanical properties and sealing performance of threaded connections on pipe string under the injection-production conditions of gas storage and the airtight threaded connections suitable for the actual working conditions can be preferred, the sealing failure of injection and production tubular strings of several domestic gas storages was investigated comprehensively. It was found that the airtight threaded connections with different performance may leak during the service of tubular strings. Existing standards and testing methods have l

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Toy, Ç., Y. Palaci, and T. Baykara. "A new ceramic thread-guide composition via low-pressure injection molding." Journal of Materials Processing Technology 51, no. 1-4 (1995): 211–22. http://dx.doi.org/10.1016/0924-0136(94)01607-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Carvalho, Rayan Marcel, Valdir Souza Ferreira, and Bruno Gabriel Lucca. "A novel all-3D-printed thread-based microfluidic device with an embedded electrochemical detector: first application in environmental analysis of nitrite." Analytical Methods 13, no. 11 (2021): 1349–57. http://dx.doi.org/10.1039/d1ay00070e.

Повний текст джерела

Анотація:

A fully 3D-printed microfluidic thread-based device containing an embedded electrochemical detector is first reported. A green method based on microflow injection analysis for sensing of nitrite ions in environmental samples is also first presented.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Thread injection"

1

Frei, Christian. "The thread injection : thread transport in circular pipe flow applied in a minimally invasive openporous implant system for endonasal surgery /." [S.l.] : [s.n.], 2000. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=13549.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Begleris, Philippos. "Three-dimensional flow predictions in motored diesel engines." Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/7870.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Attia, Usama M. "Micro-injection moulding of three-dimensional integrated microfluidic devices." Thesis, Cranfield University, 2009. http://dspace.lib.cranfield.ac.uk/handle/1826/4478.

Повний текст джерела

Анотація:

This thesis investigates the use of micro-injection moulding (μIM), as a high-volume process, for producing three-dimensional, integrated microfluidic devices. It started with literature reviews that covered three topics: μIM of thermoplastic microfluidics, designing for three-dimensional (3-D) microfluidics and functional integration in μIM. Research gaps were identified: Designing 3-D microfluidics within the limitations of μIM, process optimisation and the integration of functional elements. A process chain was presented to fabricate a three-dimensional microfluidic device for medical appli

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Lundberg, Karl Johan. "Investigating the current state of securityfor small sized web applications." Thesis, Linköpings universitet, Databas och informationsteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-89160.

Повний текст джерела

Анотація:

It is not uncommon to read about hacker attacks in the newspaper today. The hackers are targeting governments and enterprises, and motives vary. It may be political or economic reasons, or just to gain reputation. News about smaller systems is, unsurprisingly, not as common. Does this mean that security is less relevant of smaller systems? This report investigates the threat model of smaller web applications, to answer that very question.Different attacks are described in the detail needed for explaining their threat but the intention is not to teach the reader to write secure code. The report

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Shahverdi, Hamidreza. "Characterization of three-phase flow and WAG injection in oil reservoirs." Thesis, Heriot-Watt University, 2012. http://hdl.handle.net/10399/2549.

Повний текст джерела

Анотація:

Large quantities of oil usually remain in oil reservoirs after conventional water floods. A significant part of this remaining oil can still be economically recovered by Water- Alternating-Gas (WAG) injection. WAG injection involves drainage and imbibition processes taking place sequentially, hence the numerical simulation of the WAG process requires reliable knowledge of three-phase relative permeability (kr) accounting for cyclic hysteresis effects. In this study, the results of a series of unsteady-state two-phase displacements and WAG coreflood experiments were employed to investigate the

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Xie, Kai, and 謝凱. "Volume quantification and visualization for spinal bone cement injection." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B29807578.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Lin, Chao-An. "Three-dimensional computations of injection into swirling cross-flow using second-moment closure." Thesis, University of Manchester, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280543.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Kirk, Loren, Stacy D. Brown, and Paul Lewis. "Comparison of Stability Profiles of Three Generic Vancomycin Hcl for Injections Products." Digital Commons @ East Tennessee State University, 2013. https://dc.etsu.edu/etsu-works/5284.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Jacobs, Shawn. "Comparison of injection pain from the three mandibular block techniques and modulation by nitrous oxide." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ63004.pdf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Wylonis, Edward M. (Edward Michael). "Production of injection molding tooling with conformal cooling channels using the three dimensional printing process." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/10727.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Thread injection"

1

Zürich, Eidgenössische Technische Hochschule, ed. The thread injection: Thread transport in circular pipe flow applied in a minimally invasive open-porous implant system for endonasal surgery. 2000.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Goodship, Vannessa, Bethany Middleton, and Ruth Cherrington. Design and Manufacture of Plastic Components for Multifunctionality: Structural Composites, Injection Molding, and 3D Printing. Elsevier Science & Technology Books, 2015.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Gofeld, Michael. Lumbar Transforaminal and Nerve Root Injections: Ultrasound. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780199908004.003.0017.

Повний текст джерела

Анотація:

Ultrasound (US) guidance has gained recognition in the field of regional anesthesia mainly because of its definite advantage of visually localizing the desired target and also due to perceived benefits of safety, accuracy, and efficiency when peripheral nerve blocks are performed. On the contrary, ultrasonography of the spinal structures may be challenging because of depth, bony acoustic shadowing, and complex three-dimensional anatomy. Nevertheless, US allows satisfactory imaging of the posterior elements of spine column and paraspinal soft tissues. This makes US applicable and practical in t

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Design and Manufacture of Plastic Components for Multifunctionality: Structural Composites, Injection Molding, and 3D Printing. Elsevier Science & Technology Books, 2015.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Porst, Hartmut. Erectile dysfunction. Edited by David John Ralph. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780199659579.003.0103.

Повний текст джерела

Анотація:

Erectile dysfunction (ED) can be improved by changing certain lifestyle factors such as sedentary lifestyle, unhealthy food, nicotine and alcohol abuse, or optimal management of risk factors/concomitant diseases causing or aggravating ED such as dyslipidaemia, hypertension, diabetes mellitus, depression, BPH/LUTS, or hypogonadism.First choice in the medical therapy of ED are PDE-5 inhibitors such as sildenafil, vardenafil, and tadalafil used p.r.n, or on a daily low-dose regimen regarding tadalafil, especially in patients suffering from ED and BPH/LUTS. Yohimbine and L-arginine may be consider

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Application of rapid prototyping and wire arc spray to the fabrication of injection mold tools: (MSFC Center Director's Discretionary Fund final report, project No. 99-05). National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 2000.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

DeAugustinas, M., and A. Kiely. Endophthalmitis. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780199976805.003.0017.

Повний текст джерела

Анотація:

Endophthalmitis refers to inflammation of both the anterior and posterior intraocular chambers and their structures. This vision-threatening condition occurs in three principal scenarios: penetrating ocular trauma, after intraocular surgery, and in systemically infected (often immunocompromised) patients. Endophthalmitis presents with marked intraocular inflammation, often with hypopyon. Patients report pain and significant vision loss out of proportion to typical post-operative complaints. It is distinguished from uveitis by both history and slit lamp examination. Endophthalmitis is an ophtha

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Barsam, Allon, and Jimmy Uddin. Oculoplastics. Oxford University Press, 2012. http://dx.doi.org/10.1093/med/9780199237593.003.0002.

Повний текст джерела

Анотація:

This chapter begins by looking at the eyelid and nasolacrimal system anatomy, before covering the key areas of clinical knowledge, namely lash abnormality, entropion, ectropion, ptosis, benign lid lesions, premalignant and malignant lid lesions, epiphora, acquired nasolacrimal system abnormalities, and congenital abnormalities. Clinical and practical skills are then covered, including ptosis examination, evaluation of the patient with acquired epiphora, incision and curettage of chalazion, syringing and probing, and botulinum-toxin injections. The chapter concludes with three case-based discus

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Grant, Stuart A., and David B. Auyong. Basic Principles of Ultrasound Guided Nerve Block. Oxford University Press, 2016. http://dx.doi.org/10.1093/med/9780190231804.003.0001.

Повний текст джерела

Анотація:

This chapter provides a clinical description of ultrasound physics tailored to provide the practitioner a solid background for optimal imaging and needle guidance technique during regional anesthesia. Important ultrasound characteristics are covered, including optimization of ultrasound images, transducer selection, and features found on most point-of-care systems. In-plane and out-of-plane needle guidance techniques and a three-step process for visualizing in-plane needle insertions are presented. Next, common artifacts and errors including attenuation, dropout, and intraneural injection are

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Sugiyama, Masahiro, Atsushi Ishii, Shinichiro Asayama, and Takanobu Kosugi. Solar Geoengineering Governance. Oxford University Press, 2018. http://dx.doi.org/10.1093/acrefore/9780190228620.013.647.

Повний текст джерела

Анотація:

Climate engineering, a set of techniques proposed to intervene directly in the climate system to reduce risks from climate change, presents many novel governance challenges. Solar radiation management (SRM), particularly the use of stratospheric aerosol injection (SAI), is one of the most discussed proposals. It has been attracting more and more interest, and its pertinence as a potential option for responding to the threats from climate change may be set to increase because of the long-term temperature goal (well below 2°C or 1.5°C) in the 2015 Paris Agreement. Initial research has demonstrat

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Thread injection"

1

Wang, Ke, Kai-jian Chu, Tian-qi Ma, Guo-hua Zhou, and Feng Wang. "Stress Analysis of Special Thread Tightness of Injection Production String in Salt Cavern Gas Storage." In Springer Series in Geomechanics and Geoengineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1964-2_621.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Silva, Luisa, Jean-Francois Agassant, and Thierry Coupez. "Three-Dimensional Injection Molding Simulation." In Injection Molding. Carl Hanser Verlag GmbH & Co. KG, 2009. http://dx.doi.org/10.3139/9783446433731.015.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Raavi, Manohar, Simeon Wuthier, Arijet Sarker, Jinoh Kim, Jong-Hyun Kim, and Sang-Yoon Chang. "Towards Securing Availability in 5G: Analyzing the Injection Attack Impact on Core Network." In Silicon Valley Cybersecurity Conference. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-96057-5_10.

Повний текст джерела

Анотація:

Abstract5G technology for mobile networking involves control communications to set up the radio channels and the authentication and security credentials. The control communications preceding the authentication and subscription verification remain vulnerable against the communication injection threats. We study the injection threats on control communications in 5G New Radio standard in 3GPP. From our 5G client-based implementation and experimentation against real-world networking, we analyze and measure the threat impact against the 5G service provider infrastructure of the core network. To sec

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Hétu, Jean-François, and Florin Ilinca. "Three-Dimensional Simulation of Gas-Assisted and Co-Injection Molding Processes." In Injection Molding. Carl Hanser Verlag GmbH & Co. KG, 2009. http://dx.doi.org/10.3139/9783446433731.020.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Carroll, John J. "Acid Gas Injection: Days of Future Passed." In The Three Sisters. John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781119510079.ch3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Cracknell, P. S., and R. W. Dyson. "The three-plate mould." In Handbook of Thermoplastics Injection Mould Design. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-015-7209-5_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Mireault, Ray. "Emergency Response Planning for Acid Gas Injection Wells." In The Three Sisters. John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781119510079.ch17.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Yadav, Nilesh, and Narendra M. Shekokar. "SQL Injection Attacks on Indian Websites." In Cyber Security Threats and Challenges Facing Human Life. Chapman and Hall/CRC, 2022. http://dx.doi.org/10.1201/9781003218555-15.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Loret, Benjamin. "Deformable Porous Medium Saturated by Three Immiscible Fluids." In Fluid Injection in Deformable Geological Formations. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-94217-9_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Maddocks, Jim. "Acid Gas Injection: Engineering Steady State in a Dynamic World." In The Three Sisters. John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781119510079.ch1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Thread injection"

1

Millet, Cecile, Guillaume Néel, Florian Thébault, and Pierre Mauger. "Compatibility of Dope Free Solution with Dense CO2 Streams." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20930.

Повний текст джерела

Анотація:

Abstract In the framework of the injection of anthropogenic CO2 for supporting energy transition, more and more wells will be used for injecting dense CO2 streams. Dope free solutions for premium OCTG connections to replace both storage and running thread compounds are beneficial for saving time (lower running time), for environmental considerations (no discharge of dope) as well as improving running performances. However, they have never been qualified in dense CO2 stream environments containing brines, while dense CO2 is known to be a good solvent toward polymers. A test protocol has been de

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Renshaw, C. Kyle, Franley Casado, Elisa Johnston, and John Gibson. "HITL laser injection simulator and threat detector development." In Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXXVI, edited by Gerald C. Holst and David P. Haefner. SPIE, 2025. https://doi.org/10.1117/12.3054670.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Oz, Isil, Haluk Rahmi Topcuoglu, Mahmut Kandemir, and Oguz Tosun. "Examining Thread Vulnerability analysis using fault-injection." In 2013 IFIP/IEEE 21st International Conference on Very Large Scale Integration (VLSI-SoC). IEEE, 2013. http://dx.doi.org/10.1109/vlsi-soc.2013.6673282.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Erwin, Michael, and Greg Ruschau. "Thread Sealant Selection for the Alpine Miscible Injection Project." In SPE Western Regional/AAPG Pacific Section Joint Meeting. Society of Petroleum Engineers, 2002. http://dx.doi.org/10.2118/76758-ms.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Yadav, Poonam, Nirdesh Sagathia, and Dan Wade. "Demo: Battery Depletion Attack Through Packet Injection on IoT Thread Mesh Network." In 2024 16th International Conference on COMmunication Systems & NETworkS (COMSNETS). IEEE, 2024. http://dx.doi.org/10.1109/comsnets59351.2024.10426916.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Park, Jisu, DaYeon Yoo, Nara Yun, Jihoon Lee, and DaeYoub Kim. "A Thread Chaining Attack for Bypassing a DLL Injection Monitoring System^*." In 2024 IEEE International Conference on Consumer Electronics (ICCE). IEEE, 2024. http://dx.doi.org/10.1109/icce59016.2024.10444377.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Hutama, Adhi Setya, Winastwan Sista Hayu, and Adi Nugroho. "Optimization of injection process parameters for the manufacture of recycled PP material thread cones." In APPLIED PHYSICS OF CONDENSED MATTER (APCOM2023). AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0181663.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Yang, Yu-An, Yi-Chi Wei, and Che-Hsin Lin. "High performance thread-based CE-EC system with variable volume injection capability and 3D detection electrodes." In 2014 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2014. http://dx.doi.org/10.1109/nems.2014.6908857.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Xu, Xiangqian, Guoming Li, Xinyou Zhang, and Fanjun Lin. "Design and Simulation of Plasma Spraying Velocity Control System for Conical Screw Thread of Injection Molding Machine." In 2020 International Conference on Computer Engineering and Application (ICCEA). IEEE, 2020. http://dx.doi.org/10.1109/iccea50009.2020.00097.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Said, Luke, Philip Farrugia, Arif Rochman, and Pierre Vella. "Design of an Endoscopic Micro Optical Part for Fabrication With Micro Two Shot Injection Moulding." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34271.

Повний текст джерела

Анотація:

Micro two shot injection moulding (μtwo shot IM) is a manufacturing process capable of simultaneously replicating two polymeric parts and assembling them; removing the requirement for costly micro assembly. Endoscopes are used in medical environments to observe areas that are otherwise unobservable. μTwo shot IM has the potential to simultaneously replicate and assemble polymer lenses for endoscope imaging and assembling them to their required housing. In view of this, this paper contributes a case study part for application of μtwo shot injection moulding in the fabrication of an endoscopic m

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Thread injection"

1

Britt, Jack, Miriam Rosenberg, Steven Washburn, and Moshe Kaim. Development and Evaluation of a Method of Hormonal Treatment to Increase Fertility in Dairy Cows. United States Department of Agriculture, 1995. http://dx.doi.org/10.32747/1995.7612833.bard.

Повний текст джерела

Анотація:

The objectives were: 1) to develop a practical method for improving conception rates of dairy cows by administering progesterone during the critical period of the luteal phase prior to first insemination, 2) to determine which cows respond best to such a progesterone treatment, and 3) to determine physiological changes that are associated with this treatment. Experiment 1, conducted in the US and Israel, tested three treatment protocols. Holstein cows: 1) served as controls, 2) received two injections of prostaglanding F2a (PGF) 14 days apart, or 3) received two PGF injections and were inserte

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Huang, Jinsheng, Teng Fan, Yuming Rong, et al. Efficacy of Aidi injection combined with chemotherapy, radiotherapyor chemoradiotherapy for unresectable esophageal cancer treatment: A meta-analysis and systematic review of 29 randomized controlled trials. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.9.0020.

Повний текст джерела

Анотація:

Review question / Objective: In recent years, many articles have shown the significant clinical effects of traditional Chinese medicine for esophageal cancer (EC) treatment. These studies involved Chinese medicine injection, decoction, acupuncture, and moxibustion. Chinese medicine injections, including Aidi injection (Aidi) (Z52020236, China food and Drug Administration; composed of 0.15 g/ml cantharis, 5 g/ml ginseng, 10 g/ml Astragalus and 15 g/ml Eleutherococcus senticosus at a ratio of 0.03:1:2:3. The three plant names have been checked with http://www.theplantlist.org 2022/6/4), Shenqifu

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Lohne, Arild, Arne Stavland, Siv Marie Åsen, Olav Aursjø, and Aksel Hiorth. Recommended polymer workflow: Interpretation and parameter identification. University of Stavanger, 2021. http://dx.doi.org/10.31265/usps.202.

Повний текст джерела

Анотація:

Injecting a polymer solution into a porous medium significantly increases the modeling complexity, compared to model a polymer bulk solution. Even if the polymer solution is injected at a constant rate into the porous medium, the polymers experience different flow regimes in each pore and pore throat. The main challenge is to assign a macroscopic porous media “viscosity” to the fluid which can be used in Darcy law to get the correct relationship between the injection rate and pressure drop. One can achieve this by simply tabulating experimental results (e.g., injection rate vs pressure drop).

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Kwak, Sang Gyu, Yoo Jin Choo, Soyoung Kwak, and Min Cheol Chang. Efficacy of Transforaminal, Interlaminar, and Caudal Epidural Injections in Lumbosacral Disc Herniation: A Systematic Review and Network Meta-analysis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.8.0091.

Повний текст джерела

Анотація:

Review question / Objective: Epidural injection (EI) has been used to manage lower back or radicular leg pain from herniation of lumbar disc (HLD). Three types of EI techniques, including transforaminal (TFEI) interlaminar (ILEI), and caudal epidural injections (CEI), are being applied. We aimed to evaluate the comparative effect of TFESI, ILEI, and CEI for reducing pain or improving function in patients with HLD. Condition being studied: For controlling inflammation by the HLD, various oral medications and procedures are used. Among these therapeutic methods, EI of the drugs is frequently use

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Goyal, Shikha, Freny R. Karjodkar, Kaustubh Sansare, and Ankita Verma. Efficacy of Autologous Blood Injections in Treatment of Chronic Recurrent TMJ Dislocation Based on its Severity: A Prospective Study. International Journal of Surgery, 2024. http://dx.doi.org/10.60122/j.ijs.2024.10.04.

Повний текст джерела

Анотація:

Aim: To study the efficacy of autologous blood injections in treatment of chronic recurrent TMJ dislocation based on the severity of the condition. Method and Material: Total 26 patients with complain of chronic recurrent bilateral TMJ dislocation were included in the study. The patients were grouped into three groups based on the frequency of episodes of TMJ dislocation: Group 1 (7 patients) included patients with minimum one episode of TMJ dislocation each day, Group 2 (5 patients) included patients with minimum of 2 episodes of TMJ dislocation each week and Group 3 (14 patients) included pa

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Joshi, S., and L. M. Castanier. Computer modeling of a three-dimensional steam injection experiment. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10181442.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Demiral, B. M. R., P. A. Pettit, L. M. Castanier, and W. E. Brigham. A three-dimensional laboratory steam injection model allowing in situ saturation measurements. [Comparing steam injection and steam foam injection with nitrogen and without nitrogen]. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/7233795.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Maguire, Rory. Virginia No-Till Fact Sheet Series Number Three: Manure Injection. Virginia Cooperative Extension, 2019. http://dx.doi.org/10.21061/3011-1517.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Lagus, P. L., and R. A. Grot. PR-221-9215-R01 Manufacture Pre-Production Gas Flow Measurement System. Pipeline Research Council International, Inc. (PRCI), 1995. http://dx.doi.org/10.55274/r0011966.

Повний текст джерела

Анотація:

Measurement of the throughput of a natural gas compressor can be undertaken using a constant flow tracer dilution technique. In this technique, a constant flow of tracer is introduced into the piping upstream of the compressor while samples of diluted tracer are measured downstream of the compressor. The samples are analyzed using a specially configured analyzer. Knowledge of the injection rate and injection concentration coupled with the downstream measurement of tracer concentration allows the throughput through the compressor to be calculated. Under this contract, three systems were fabrica

Стилі APA, Harvard, Vancouver, ISO та ін.

10

DeVries, Nieland, Wagg, and Xie. FV387KR Temperature Effects on Threaded Couplings in Caverns. Pipeline Research Council International, Inc. (PRCI), 2008. http://dx.doi.org/10.55274/r0010918.

Повний текст джерела

Анотація:

This report documents research performed to identify if gas injection and withdrawal temperatures of typical natural gas well completions could potentially result in failure of the casing through low-frequency cyclic fatigue. Finite element analyses of two salt cavern wells and one reservoir storage well were used to estimate the state of stress in the casing resulting from: (1) casing weight; (2) product pressures; (3) thermally induced stresses; and (4) external ground pressures, including salt creep. The range of stress and temperature conditions determined during simulations of gas service

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!