Добірка наукової літератури з теми "Ti–Hf–N(Fe)"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Ti–Hf–N(Fe)".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Ti–Hf–N(Fe)"

1

Jung, Woo Sang, Soon Hyo Chung, Heon Phil Ha, and Ji Young Byun. "An Ab Initio Study of the Energies of Coherent Interfaces Formed between bcc Iron and Carbides or Nitrides of Transition Metals." Solid State Phenomena 124-126 (June 2007): 1625–28. http://dx.doi.org/10.4028/www.scientific.net/ssp.124-126.1625.

Повний текст джерела
Анотація:
An ab initio study was carried out on interface energies at coherent interfaces between bcc Fe and MXs (NaCl structure, M = Ti, Zr, Hf, V, Nb, Ta, X=C, N). The interface energies have positive values for carbides and nitrides of group IVB metals (Ti, Zr, Hf), while they have negative values for carbides and nitrides of group VB metals (V, Nb, Ta). Influence of bond energy was estimated using the discrete lattice plane/nearest neighbor broken bond (DLP/NNBB) model. It was found that the dependence of interface energy on the type of carbides and nitrides was closely related to changes of the bon
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Andreev, A. A., V. M. Beresnev, M. A. Volosova, et al. "Tribological characteristics of nanocomposite vacuum-plasma Ti-Hf, Ti-Hf-N, and Ti-Hf-Si-N coatings." Journal of Friction and Wear 34, no. 3 (2013): 175–82. http://dx.doi.org/10.3103/s1068366613030033.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Inoue, Akihisa, Bao Long Shen, and Akira Takeuchi. "Syntheses and Applications of Fe-, Co-, Ni- and Cu-Based Bulk Glassy Alloys." Materials Science Forum 539-543 (March 2007): 92–99. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.92.

Повний текст джерела
Анотація:
This paper reviews our recent results of the formation, fundamental properties, workability and applications of late transition metal (LTM) base bulk glassy alloys (BGAs) developed since 1995. The BGAs were obtained in Fe-(Al,Ga)-(P,C,B,Si), Fe-(Cr,Mo)-(C,B), Fe-(Zr,Hf,Nb,Ta)-B, Fe-Ln-B(Ln=lanthanide metal), Fe-B-Si-Nb and Fe-Nd-Al for Fe-based alloys, Co-(Ta,Mo)-B and Co-B-Si-Nb for Co-based alloys, Ni-Nb-(Ti,Zr)-(Co,Ni) for Ni-based alloys, and Cu-Ti-(Zr,Hf), Cu-Al-(Zr,Hf), Cu-Ti-(Zr,Hf)-(Ni,Co) and Cu-Al-(Zr,Hf)-(Ag,Pd) for Cu-based alloys. These BGAs exhibit useful properties of high mecha
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Krüger, Kathrin, Klaus Seemann, Harald Leiste, Michael Stüber, and Sven Ulrich. "High-frequency magnetoelastic measurements on Fe–Co–Hf–N/Ti–N multilayer coatings." Journal of Magnetism and Magnetic Materials 343 (October 2013): 42–48. http://dx.doi.org/10.1016/j.jmmm.2013.04.071.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Li, Jinchun, Hongquan Song, Ping Qian, and Jiang Shen. "Atomic study of fracture progress of Fe[110]/TMC[100] (TM = Ti, Zr and Hf) semi-coherent interfaces." Modern Physics Letters B 28, no. 24 (2014): 1450192. http://dx.doi.org/10.1142/s0217984914501929.

Повний текст джерела
Анотація:
Using first-principle calculation in combination with the Chen–Möbius inversion method, we get the interfacial potentials of the Fe [110]/ TMC [100] ( TM = Ti , Zr and Hf ) interface system. Based on the interfacial potentials, we investigate the interfacial stability, misfit dislocations and tensile fracture of the semi-coherent interfaces of Fe [110]/ TMC [100] ( TM = Ti , Zr and Hf ). The different sizes of the misfit dislocation models are employed to compare the interfacial energy. Results indicate that Fe [110]/ HfC [100] interface is more stable than Fe [110]/ TMC [100] ( TM = Ti and Zr
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Shih, K. K., and D. B. Dove. "Ti/Ti‐N Hf/Hf‐N and W/W‐N multilayer films with high mechanical hardness." Applied Physics Letters 61, no. 6 (1992): 654–56. http://dx.doi.org/10.1063/1.107812.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Agraval, Pavel, Mikhail Turchanin, Liya Dreval, and Anna Vodopyanova. "Application of CALPHAD Method for Predicting of Concentration Range of Amorphization of Transition Metals Melts." Defect and Diffusion Forum 431 (February 6, 2024): 35–45. http://dx.doi.org/10.4028/p-lvl7lu.

Повний текст джерела
Анотація:
Early, the efficiency of the CALPHAD (Calculation of Phase Diagrams) method to a targeted search for compositions of amorphous alloys has been shown. The method for predicting the ranges of amorphization is based on the calculation of diagrams of metastable phase transformations between supercooled melts and boundary solid solutions on the base of pure elements. In this work, the model parameters for thermodynamic properties of liquid alloys and boundary solid solutions were summarized in a self-consistent database for the multicomponent Cu–Fe–Ni–Ti–Zr–Hf system. Such database for the multicom
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Evseev, Nikolay S., Il’ya A. Zhukov, Raul’ Mubarakov, and Ivan A. Bel’chikov. "A study of the physical and mechanical properties of hot-pressed composite ceramics of the Hf–Ti–Cr–Fe–V–N system." Vestnik Tomskogo gosudarstvennogo universiteta. Matematika i mekhanika, no. 90 (2024): 92–102. http://dx.doi.org/10.17223/19988621/90/8.

Повний текст джерела
Анотація:
The concept of synthesizing multicomponent (five or more components) systems in equiatomic or near-equiatomic percentages has opened a new class of materials, including high-entropy alloys (HEAs) and high-entropy ceramics (HEC). The composition of each element varies from 5 to 35 at.%. It is generally accepted that the exceptional performance of high-entropy materials is achieved through four “basic effects”: the highentropy effect, the lattice distortion effect, the slow diffusion effect, and the “cocktail” effect. The properties of multicomponent systems are determined not only by the consti
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Larsen, K. K., D. Wielandt, and M. Bizzarro. "Multi-element ion-exchange chromatography and high-precision MC-ICP-MS isotope analysis of Mg and Ti from sub-mm-sized meteorite inclusions." Journal of Analytical Atomic Spectrometry 33, no. 4 (2018): 613–28. http://dx.doi.org/10.1039/c7ja00392g.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Song, J. Y., J. J. Lee, S. H. Han, H. J. Kim, and J. Kim. "Soft magnetic properties of as-deposited Fe–Hf–C–N and Fe–Hf–N nanocrystalline thin films." Journal of Applied Physics 83, no. 11 (1998): 6652–54. http://dx.doi.org/10.1063/1.367526.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Ti–Hf–N(Fe)"

1

Погребняк, Олександр Дмитрович, Александр Дмитриевич Погребняк, Oleksandr Dmytrovych Pohrebniak, et al. "Formation of Superhard Nanostructured Ti–Hf–N(Fe) Coatings Obtained by Vacuum Arc Deposition in HF discharge." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34929.

Повний текст джерела
Анотація:
Superhard nanostructured Ti–Hf–N(Fe) coatings are prepared. The formation of local regions of (Ti, Hf)N, FeN, and Hf is detected using μ-PIXE (ion microbeam). It is revealed that the synthesized coatings have a nanohardness of 48 ± 1 GPa and are composed of nanograins with a size of 4.8–10.6 nm, which are enveloped by finer entities of other phases (Ti, Fe)N and FeN. There is a good correlation between the results derived by XRD, TEM, AFM, and SEM and microanalysis, which in turn are complemented by the analysis results obtained using an ion microbeam and PIXE. When you are citing the doc
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Krüger, Kathrin [Verfasser], and Dr S. [Akademischer Betreuer] Ulrich. "Funktionelle PVD-Viellagenschichten aus den Systemen Fe-Co-Hf-N, Ti-N und Ti-Al-N für die Hochfrequenz-Sensorik / Kathrin Krüger. Betreuer: Dr. S. Ulrich." Karlsruhe : KIT-Bibliothek, 2015. http://d-nb.info/1070635707/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Mahdouk, Kamal. "Étude thermodynamique de quelques alliages binaires et ternaires de métaux de transition par calorimétrie à haute température : cas des systèmesOS-TI, OS-ZR, OS-HF, RU-ZR, FE-ZR, FE-HF ET FE-ZR-HF." Nancy 1, 1995. http://www.theses.fr/1995NAN10214.

Повний текст джерела
Анотація:
Ce travail est dédié essentiellement aux mesures d'enthalpies de formation de composes intermétalliques par calorimétrie de réaction directe à températures élevées. Six systèmes binaires et un ternaire de métaux de transition ont été étudiés. L’étude par rayons X et microsonde des produits de la calorimétrie a permis de mettre en évidence deux nouveaux composes: OsZr2 (structure cubique type NiTi2) et Os17Zr54 (structure orthorhombique type Os17Hf54) aussi que de confirmer l'existence de Fe23Zr6. Dans le système Os-Hf, aucune trace des phases Os29Hf71 et OsHf2, qualifiées par Waterstrat de pha
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Погребняк, Олександр Дмитрович, Александр Дмитриевич Погребняк, Oleksandr Dmytrovych Pohrebniak, et al. "Superhard nanostructured coatings based on Ti-Hf-Si-N their properties and structure." Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/20643.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Окулов, А. В. "Прочные низкомодульные сплавы на основе систем Ti-Zr, Ti-Hf, Ti-Nb, Ti-Fe и Ti-Ni для биомедицинского применения : диссертация на соискание ученой степени кандидата технических наук : 05.16.01". Thesis, б. и, 2019. http://hdl.handle.net/10995/95086.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Окулов, А. В. "Прочные низкомодульные сплавы на основе систем Ti-Zr, Ti-Hf, Ti-Nb, Ti-Fe и Ti-Ni для биомедицинского применения : автореферат диссертации на соискание ученой степени кандидата технических наук : 05.16.01". Thesis, б. и, 2019. http://hdl.handle.net/10995/95085.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Погребняк, Олександр Дмитрович, Александр Дмитриевич Погребняк, Oleksandr Dmytrovych Pohrebniak, et al. "Influence of Deposition Parameters on Physical and Mechanical Properties of Nitride High- Entropy Alloys (Ti-Zr-Hf-V-Nb)N." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35408.

Повний текст джерела
Анотація:
Increasing of the negative potential on the substrate during the deposition of high-entropy nitride coatings of (Ti-Zr-Hf-V-Nb)N system leads to formation of the texture along the [111] axis, followed by the growth of its excellence. Increasing of potential on the substrate also leads to increasing of the microhardness values of the coatings from 24.78 GPa to 27.36 GPa. Results of tribological tests showed that after applying the test nitride coatings on steel disc, its durability significantly increased. This suggests high protective properties of (Ti-Zr-Hf-V-Nb)N coatings. By vary
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Demianenko, A. A., and V. M. Rogoz. "Influence of Thermal Treatment on the Structure, Physical and Mechanical Properties of Nanostructured Coatings (Ti, Hf, Nb, Si)N Deposited by C-PVD Method." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35231.

Повний текст джерела
Анотація:
The paper describes the nanostructured coatings produced by C-PVD method at various deposition conditions. Samples with thickness of 2, 3 mm and diameter 10, 42 mm were constructed of steel 0.55 % Fe, 0.45 % C with polished surface. The samples were tested by XRD (small angle X-Ray diffraction), SEM with EDX, AFM, scratch – tester REVETEST, tests of wear resistance and acoustic emission, nanoindenter before annealing. It was discovered that the size of nanograins varied from 3,3 nm to 8 nm by annealing at 500°, 800° and 1000°C. By dint of μ- PIXE were discovered the segregation process of impu
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Vračar, Miloš. "Influence of defect chemistry on heterogeneous catalysis two examples using Sr(Fe x Ti 1-x )O 3-delta and Li 3 N /." [S.l. : s.n.], 2008. http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-35602.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Gachon, Jean-Claude. "Enthalpies de formation des composés binaires de métaux de transition par réaction directe dans un calorimètre 1800 K. : Discussion de méthodes de prévisions thermodynamiques et structurales." Nancy 1, 1986. http://www.theses.fr/1986NAN10055.

Повний текст джерела
Анотація:
Mise au point d'un nouveau calorimètre pouvant fonctionner depuis la température ambiante jusqu'à 1800K. Application à des mesures de capacité calorifique et d'enthalpie de formation ainsi qu'à l'analyse thermique différentielle. Caractérisation de l'enthalpie de 27 composés binaires de métaux de transition. Étude à partir des résultats de plusieurs modèles de prévision des enthalpies de formation d'alliages. Discussion des résultats. Proposition d'un modèle prévisionnel de stoechiométries et des structures des phases binaires susceptibles d'apparaître dans un système métallique
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Ti–Hf–N(Fe)"

1

Hashimoto, Kimio, Dai Kawahara, Yukiko Toshimori, Masahide Hayakawa, Hisato Sakashita, and Haruyuki Kawahara. "New Titanium Alloy of Ti-Fe-O-N for Dental Implant." In Advances in Science and Technology. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-05-2.119.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Oikawa, Katsunari, Hajime Mitsui, and Kiyohito Ishida. "A Thermodynamic Database for Fe-Cr-Mn-Ni-Ti-S-C-N System." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-981-4.711.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Matsuura, Hiroyuki, Wonjin Choi, and Gen Kamimura. "Evolution of Non-metallic Inclusions in Solid Fe–Al–Ti–N Alloy During Heating." In The Minerals, Metals & Materials Series. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51340-9_19.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Pogrebnjak, A. D., A. S. Kaverina, V. M. Beresnev, et al. "Investigation of Multilayer Superhard Ti-Hf-Si-N/NbN/Al2 O3 Coatings for High Performance Protection." In Ceramic Engineering and Science Proceedings. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119040354.ch18.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Laversenne, L. "Synthesis and crystal structure of transition element borohydrides: M(BH4)y, M= Ti, Zr, Hf, Mn, Fe, Cu, Zn, Cd." In Hydrogen Storage Materials. Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-54261-3_52.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Carow-Watamura, U., D. V. Louzguine, and A. Takeuchi. "Cu-Hf-Ti." In Physical Properties of Ternary Amorphous Alloys. Part 3: Systems from Cr-Fe-P to Si-W-Zr. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-14133-1_20.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Friesen, T., J. Haupt, P. N. Gibson, and W. Gissler. "Hardness and Young’s Modulus of Cosputtered Ti-B-N and Hf-B-N Films and Correlations to their Microstructure and Composition." In Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1765-4_32.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Evseev, Nikolay S., and Ivan A. Belchikov. "Study of the Classification Process of Fine Powders of the Hf-Ti-Cr-FeV-N High-Entropy System." In Springer Proceedings in Physics. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1872-6_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Sorlin, O. "The Role of the N = 28 and N = 40 Closed Shells in the Production of the Neutron-Rich Ca-Ti-Cr-Fe-Ni Elements in the Universe." In Origin of Elements in the Solar System. Springer US, 2002. http://dx.doi.org/10.1007/0-306-46927-8_7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

"Ternary System Fe-N-Ti." In Ternary Steel Systems: Phase Diagrams and Phase Transition Data. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-540-88154-4_23.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Ti–Hf–N(Fe)"

1

John, R. C., P. Spencer, A. D. Pelton, et al. "Predictions of Corrosion Products for Alloys Corroding in Complex Gases via Thermochemical Analyses." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03501.

Повний текст джерела
Анотація:
Abstract The capability to perform very user-friendly, thermochemical analyses of complex, real alloys corroding in complex, high-temperature gases has been developed. Predictions of the stabilities of complex assemblies of corrosion products formed by reactions of alloys containing Fe-Cr-Ni-Co-C-N and gases containing S-C-O-H-N species can now be done with unprecedented accuracy and generality. The thermochemical data models are based upon extensive analyses of all available thermochemical data for all possible solid and liquid compounds and solutions based upon all combinations of Fe-Cr-Ni-C
Стилі APA, Harvard, Vancouver, ISO та ін.
2

John, R. C., A. D. Pelton, P. Spencer, A. L. Young, and W. T. Thompson. "Alloy Carburization at Temperatures of 1,200 - 2,100°F (650 - L,150°C)." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03474.

Повний текст джерела
Анотація:
Abstract A large body of knowledge on the carburization of engineering alloys used in high-temperature petrochemical processing equipment is being developed. The capability includes: the facility to perform thermochemical assessments of carbide formation on complex alloys in diverse conditions and the capability to predict carburization for various exposure conditions. The alloys considered are widely used, commercial and based upon mixtures of Fe-Cr-Ni-Co. The gaseous exposure conditions considered contain CH4-H2-H2S-H2O. The thermochemical data models have been prepared to predict phase form
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Köhler, M., U. Heubner, K. W. Eichenhofer, and M. Renner. "Alloy 33, a New Corrosion Resistant Austenitic Material for the Refinery Industry and Related Applications." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95338.

Повний текст джерела
Анотація:
Abstract A new corrosion resistant austenitic material alloyed with nominally (wt. %) 33 Cr, 32 Fe, 31 Ni, 1.6 Mo, 0.6 Cu, 0.4 N exhibits excellent resistance to general and local corrosion in hot mineral acids and chloride bearing solutions. Furthermore, the new alloy stands out for its superior corrosion resistance in many other corrosive environments from acidic to alkaline including resistance to stress corrosion cracking. In mixed HNO3/HF acids the corrosion resistance of Alloy 33 is superior to high chromium nickel-base alloys. In NaOH solutions the new alloy is applicable to conditions
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Pogrebnjak, A. D., A. G. Ponomarev, M. V. Kaverin, et al. "The formation of superhard coatings = 48 GPa in Ti-Hf-N (Fe) and analysis of their structure and properties." In 13th International Conference on Plasma Surface Engineering September 10 - 14, 2012, in Garmisch-Partenkirchen, Germany. Linköping University Electronic Press, 2013. http://dx.doi.org/10.3384/wcc2.475-478.

Повний текст джерела
Анотація:
Superhard nanostructured Ti–Hf–N(Fe) coatings are prepared. The formation of local regions of (Ti, Hf)N, FeN, and Hf is detected using µ-PIXE (ion microbeam). It is revealed that the synthesized coatings have a nanohardness of 48 ± 1 GPa and are composed of nanograins with a size of 4.8–10.6 nm, which are enveloped by finer entities of other phases (Ti, Fe)N and FeN. There is a good correlation between the results derived by XRD, TEM, AFM, and SEM and microanalysis, which in turn are complemented by the analysis results obtained using an ion microbeam and PIXE.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Beresnev, V. M., A. A. Andreev, O. V. Sobol, et al. "General Regularities and Differences of Nanostructured Coatings Based on Nitrides of Zr, Ti, Hf, V, Nb Metals and Their Combinations." In 13th International Conference on Plasma Surface Engineering September 10 - 14, 2012, in Garmisch-Partenkirchen, Germany. Linköping University Electronic Press, 2013. http://dx.doi.org/10.3384/wcc2.72-75.

Повний текст джерела
Анотація:
Using the vacuum-arc source with the HF discharge, nano-structured hard and super-hard coatings based on Ti-Hf-N(Fe), Ti-Hf-Si-N, Ti-Zr-Si-N, and (Ti, Zr, Hf, Nb, V)N of 1.2µm to 2.5µm thickness were manufactured. The coatings were studied using the proton micro-beam µ-PIXE, RBS, SIMS, SEM with EDS, XRD, and tested for adhesion resistance, wear, and nano-hardness. It was found that a concentration of Ti, Zr, Hf, V, and Nb metals as well as a bias potential applied to a substrate and residual pressure in a chamber (N or Ar/N) affected the formation regularities of solid solutions and quasi-amor
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Tayal, Akhil, Mukul Gupta, Ajay Gupta, Jochen Stahn, and M. Horisberger. "Optimization of Ti addition in Fe for Fe-Ti-N thin films." In SOLID STATE PHYSICS: Proceedings of the 56th DAE Solid State Physics Symposium 2011. AIP, 2012. http://dx.doi.org/10.1063/1.4710212.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Storchak, Anastasiia, та Marina Bulanova. "Comparison of the М1(IV)–M2(IV)–{Fe,Co,Ni,Cu} phase diagrams (М–Ti, Zr, Hf)". У IXth INTERNATIONAL SAMSONOV CONFERENCE “MATERIALS SCIENCE OF REFRACTORY COMPOUNDS”. Frantsevich Ukrainian Materials Research Society, 2024. http://dx.doi.org/10.62564/m4-as1327.

Повний текст джерела
Анотація:
Phase relations in Zr-Ti-{Fe,Co,Ni,Cu}, Hf-Ti-{Fe,Co,Ni,Cu} and Hf-Zr-{Fe,Co,Ni,Cu} are discussed based on the results of our research [1, 2] and literature data. The common features and peculiarities of the systems are revealed. The main common feature is the formation of Laves phases. In the systems with Ni and Cu they base on ternary compounds, and in systems with Fe and Co these are binary-based phases. Based on generalizations made and crystallographic data, phase relations in unstudied Hf-Zr-{Co,Ni,Cu} systems are predicted. It is shown that the complexity of the topology of phase diagra
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Srinivasan, K., J. Das, and C. E. Patton. "Intergranular Interactions in Fe-Ti-N Thin Films." In INTERMAG 2006 - IEEE International Magnetics Conference. IEEE, 2006. http://dx.doi.org/10.1109/intmag.2006.375545.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Volosova, M., T. Ramanouskaya, J. Bublikov, C. Sotova, and V. Zelenkov. "Investigation of wear resistance of nanolayer multicomponent coatings Ti-TiN-(Ti,Cr,Al)N and ZrHf-(Zr,Hf)N-(Zr,Hf,Cr,Mo,Al)N." In ADVANCEMENTS IN MATERIALS FOR CIVIL ENGINEERING APPLICATIONS. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0222429.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Burakov, Boris E., and Evgeniy B. Anderson. "Crystalline Ceramics Developed for the Immobilization of Actinide Wastes in Russia." In ASME 2001 8th International Conference on Radioactive Waste Management and Environmental Remediation. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/icem2001-1213.

Повний текст джерела
Анотація:
Abstract It is proposed that only ceramics, which are based on host-phases similar to naturally occurring accessory minerals including zircon, (Zr,Hf,An,…)SiO4; hafnon, (Hf,Zr,An,…)SiO4; baddeleyite, (Zr,Hf,An,…)O2; tazheranite (cubic zirconia), (Zr,Hf,Ca,Ti,An,…)O2; garnet, (Ca,Fe,Gd,An,…)3(Al,Fe,Si,An,…)5O12 and perovskite, (Ca,Gd,An,…)(Al,Fe,Ti,…)O3, are the most suitable materials for actinide (An = U, Pu, Np, Am, Cm) isolation in deep geological formations. Solid solution of Pu in cubic zirconia, (Zr,Pu)O2, could be used as ceramic nuclear fuel which is competitive with mixed oxide fuel,
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Ti–Hf–N(Fe)"

1

Meadows, J. W., D. L. Smith, L. R. Greenwood, R. C. Haight, Y. Ikeda, and C. Konno. Measured fast-neutron activation cross sections of Ag, Cu, Eu, Fe, Hf, Ni, Tb and Ti at 10.3 and 14.8 MeV and for the continuum neutron spectrum produced by 7-MeV deuterons on a thick Be-metal target. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/10105364.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Ruangpornvisuti, Vithaya. Surfaces properties of Zirconia and its adsorption of gases : Research report. Chulalongkorn University, 2015. https://doi.org/10.58837/chula.res.2015.36.

Повний текст джерела
Анотація:
The adsorption of CO and NH₃ gases on the cubic ZrO2 (110) surface was investigated by two–dimensionally periodic slab model DFT method. The relative adsorption energies of these gases on the cubic ZrO₂ (110) surface is in order: NH₃ > CO. The adsorption energies of NH3 on the cubic ZrO₂ (110) surface are –27.62 and –25.51 kcal/mol, obtained using the PBE0 and B3LYP methods, respectively. The CO adsorption on the cubic ZrO2 (110) surface –11.39 and –9.81 kcal/mol, obtained using the PBE0 with rigid and flexible models, respectively. The geometry optimizations of zirconia nanoparticle (ZrO₂–
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!