Увійти

Готові списки джерел за темами / Treatment shafts / Дисертації

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Treatment shafts.

Дисертації з теми "Treatment shafts"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-22 дисертацій для дослідження на тему "Treatment shafts".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Andersson, Sofia. "Study of Dross in Ductile Cast Iron Main Shafts." Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-37148.

Повний текст джерела

Анотація:

The study of dross in ductile cast iron main shafts was performed at Global Castings Guldsmedshyttan AB and presented in this master thesis. The purpose of the study was to obtain answers to why dross defects were present in some of the foundry's casted main shafts, with the main problem located at the flange of the shaft. The chemical composition of the dross formations and which steps in the casting process that increased the dross formation were of interest. The study only included dross in main shafts manufactured at Global Castings Guldsmedshyttan AB. Dross particles form when elements su

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Савчук, Володимир Іванович, Владимир Иванович Савчук, Volodymyr Ivanovych Savchuk, А. О. Куманцев та С. В. Порохня. "Особенности конструкции устройств, применяемых при обработке валов абразивными брусками". Thesis, Издательство СумГУ, 2007. http://essuir.sumdu.edu.ua/handle/123456789/19100.

Повний текст джерела

Анотація:

Нами предложено устройство, позволившее обеспечить требуемые параметры при отделочной обработке валов, такие как возможность регулирования частот радиальных и осевых колебаний бруска в широком диапазоне, а также изменение амплитуды движения режущего инструмента в процессе обработки. При цитировании документа, используйте ссылку http://essuir.sumdu.edu.ua/handle/123456789/19100

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Durfy, Jennifer L. "Investigation of damping treatments for propeller shaft vibration." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0029/MQ65288.pdf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Мірошніченко, О. М., О. В. Лупирь, Тетяна Павлівна Говорун, Татьяна Павловна Говорун та Tetiana Pavlivna Hovorun. "Застосування хіміко-термоциклічної обробки для валів зі сталі 25ХГТ". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/64073.

Повний текст джерела

Анотація:

Часто традиційні способи зміцнюючих технологій виявляються недостатньо ефективними при вирішенні задач нової техніки. Це призвело до розробки у останній час способів та режимів, в основі яких лежать прийоми, що дозволяють інтенсифікувати велику кількість фізико-хімічних процесів за рахунок використання природи матеріалів і особливостей протікаючих у них структурних перетворень.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Sinikumpu, J. J. (Juha-Jaakko). "Forearm shaft fractures in children." Doctoral thesis, Oulun yliopisto, 2013. http://urn.fi/urn:isbn:9789526203003.

Повний текст джерела

Анотація:

Abstract There are previous reports of an increasing incidence of children’s forearm fractures in the last few decades. Their surgical treatment is evolving. The present study was aimed at determining the incidence and background of these fractures and their treatment. It was also aimed to analyse the short- and long-term outcomes. A comprehensive population-based study (N=168) among 86,000 children in Oulu University Hospital District over a decade (2000–2009) was performed to analyse the incidence of middle-third forearm fractures. Further data (N=291) covering 1997–2009 was achieved in orde

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Matsuba, Stephen N. "The Prism of war : Shaw's treatment of war in Arms and the man and Heartbreak house." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/26887.

Повний текст джерела

Анотація:

Many critics examine Shaw's plays in terms of the subjects they deal with, but they often ignore what aspects of these subjects Shaw draws on or how he uses them. One subject that appears in many of his works is war. This thesis examines Shaw's treatment of war in Arms and the Man and Heartbreak House, and attempts to discover a common element between them that reveals something not only about the plays themselves, but also about Shaw's drama in general. The chapter on Arms and the Man notes how Shaw makes war a highly visible element of the play, but avoids dealing with issues directly relat

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Isert, Dietmar. "The accounting treatment of derivatives on a reporting entity's own shares adding the new category "equity derivatives"." Baden-Baden Nomos, 2008. http://d-nb.info/993924395/04.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Lazarinis, Stergios. "Form and Finish of Implants in Uncemented Hip Arthroplasty : Effects of Different Shapes and Surface Treatments on Implant Stability." Doctoral thesis, Uppsala universitet, Ortopedi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-185299.

Повний текст джерела

Анотація:

The design of an uncemented hip arthroplasty implant affects its long-term survival. Characteristics such as the form and the finish of the implant are crucial in order to achieve the best possible conditions for long-term implant survival. In this thesis we hypothesized that different shapes of stems and cups used in primary and revision total hip arthroplasty (THA), and their finish with hydroxyapatite (HA) coating affect implant stability and thus long-term survival. In 2 prospective cohort studies the clinical outcome, the stability measured with radiostereometric analysis (RSA), and the p

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Fini, Stefano. "Effect of friction, surface treatment and adhesive-reinforcement on the behavior of threaded connections. Effetto dell'attrito, dei trattamenti superficiali e dell'incollaggio sul comportamento dei collegamenti filettati." Doctoral thesis, Università degli studi di Padova, 2017. http://hdl.handle.net/11577/3422419.

Повний текст джерела

Анотація:

This study aims at analyzing the phenomena which characterize threaded connections. This type of joint has been known for thousands years (one of the first applications is attributable to Archimedes) allows transforming a torque into an axial force, typically used to lock two or more components thanks to the friction forces that arise between the connected bodies. One of the main strengths of this type of coupling is the possibility to assemble and disassemble the assembled parts; in addition, it can be applicable to almost any type of material. However, the joint system is characterized by

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Kindo, Ajit Kumar, and Rajesh Goel. "Optimization of heat treatment of steel developed for turbine shafts." Thesis, 2012. http://ethesis.nitrkl.ac.in/3450/1/THESIS(108MM015%2C_108MM022).pdf.

Повний текст джерела

Анотація:

Turbine shafts are basically used in steam turbine, hydro turbine and wind turbines. These turbine shafts require very stringent properties. Generally high yield strength, tensile strength and percentage elongation are required along with high impact values at the same time. In addition, the material should exhibit good high temperature properties such as creep, elevated temperature strength and thermal stability. Practically the turbine shafts used are very massive in size. Hence, the coefficient of thermal expansion should be small so as to maintain a minimum temperature gradient between the

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Lung, Yun-han, and 龍雲漢. "Robust Design of Transmission Shaft for Minimizing Heat Treatment Distortion." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/45510225212231967407.

Повний текст джерела

Анотація:

碩士<br>國立臺灣科技大學<br>機械工程系<br>87<br>This thesis addresses the relation between geometric design and dimensional distortion pattern of transmission shaft due to heat treatment. The study first explores the origin of dimensional distortion from part materials and quenching processes to comprehend the key points of part design. Taguchi's method is applied to analyze the major control and noise factors of heat treatment. A regression model of dimension distortion is then derived for the spline section of a three-stage shaft. The regression model is applied to the parameter design of transmission shaf

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Hsu, Ming-Wei, and 許銘維. "The study of rocker arm bearing shaft high frequency hardening treatment parameters." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/e3vmc8.

Повний текст джерела

Анотація:

碩士<br>國立中央大學<br>機械工程學系在職專班<br>106<br>The rocker arm bearing is mainly used in a cylinder head cam mechanism of a motorcycle engine and assumes the opening and closing functions of the valve. It plays an important role in the intake and exhaust of fuel and combustion gases in the engine. In the running of the engine, the cam will rotate constantly. The slider rocker arm was used in the past. The current method of "rolling contact" is used instead of friction. When the rocker bearing is rolling, the shaft needs to bear the collision and friction. Since the stress generation and damage often focu

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Lu, Kuan-Yi, and 盧光義. "Finite Element Analysis of New Intramedullary Interlocking Nails in Treatment of Femoral Shaft Fractures." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/99481674197880464802.

Повний текст джерела

Анотація:

碩士<br>國立陽明大學<br>醫學工程研究所<br>88<br>The design parameters of a femoral intramedullar (IM) nail were investigated through measuring the geometrical dimensions of femur X-ray films. A CAE commercial package I-Deas was used to model and investigate the functions of new designed modular IM nail and to compare with the conventional one - Richard nail. Two finite element models were constructed from CT femoral imaged, namely, femur with the designed nail and femur with Richard nail. Each modeling was analyzed in the cases of 5mm thick communication fragment in 13 different locations along the femoral s

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Liao, Pei Yi, and 廖珮懿. "Biomechanical Study for Treatment of Ipsilateral Femoral Neck and Shaft Fractures Using Intramedullary Nail." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/47296752832587255105.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Chung, Han-Pin, and 鍾翰賓. "Biomechanical Study of Different Fixation Techniques of Interlocking Nail with Slot Hole Design for the Treatment of Femoral Shaft Fractures." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/17663799406910155173.

Повний текст джерела

Анотація:

碩士<br>國立臺灣科技大學<br>機械工程系<br>101<br>An interlocking nail system has become a standard treatment for femoral shaft fracture, because of the superiority of better stability over plates. The usual fixation of traditional nail is static fixation for its great stability, however, a traditional nail with static fixation may make femoral fracture nonunion owing to the gaps between fracture fragments. Then, immediate dynamization is regarded as an effective treatment for nonunion. The principle of dynamization with traditional nail is to remove all proximal or distal screws to reduce gaps within fractur

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Huang, Tse-Jung, and 黃則容. "Channel Shapes by Hydrogen Plasma and High Temperature Treatments on Electrical Properties of SOI FinFETs." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/69089606317984150608.

Повний текст джерела

Анотація:

碩士<br>國立清華大學<br>工程與系統科學系<br>104<br>When transistors’ feature sizes scale down lower than 20 nm, conventional MOSFET confront some issues such as the effects of subthreshold leakage, gate leakage, and so on. These issues can be resolved by FinFET structure. The electrical characteristics of FinFET can be bettter if its channel shape is high and thin. Effects of hydrogen plasma and high temperature treatment are studied in this thesis. When hydrogen plasma treatment is aplied on silicon surface, a slight etching could make channel more vertical, namely trimming, and enhances electrical character

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Lee, Yi-Hui, and 李怡慧. "A Study of the Efficient Performance of Grouting Treatment for Groundwater Seepage —Case of the No.3 shaft in Ping-Lin Tunnel." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/62578268968655273487.

Повний текст джерела

Анотація:

碩士<br>國立海洋大學<br>河海工程學系碩士在職專班<br>91<br>In recent years, it is inevitable for the engineering works to reach their sites to mountain region, as a number of big projects of public works in Taiwan are being impelled, such that the importance of tunnel engineering becomes pronounced from day to day, and new records of tunnel length and diameter are created. Therefore, under the demands for high quality of engineering technique as day by day shaft engineering works are getting as one of major key which is the important subject of a long tunnel. Taipei-Ilan Expressway is a 31km east-west

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Vižďák, Jozef. "Smluvní autonomie při konstrukci druhů akcií a její limity." Master's thesis, 2020. http://www.nusl.cz/ntk/nusl-437843.

Повний текст джерела

Анотація:

The theme of this diploma thesis is "Contracting autonomy in construction of types of shares and its limits". It aimed to analyse the domestic legal regulation. Its effort was to set limits in the construction of types of shares. This was achieved especially through grammatical, logical, systematical and teleological interpretation of legal regulation, with help of law doctrine, and on the smaller scale by comparisons with foreign legal systems. It succeeded in analysing key provisions and setting limits that cannot be crossed when constructing types of shares. The aim of the diploma thesis wa

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Švejda, Jiří. "Smluvní autonomie při konstrukci druhů akcií a její limity." Master's thesis, 2019. http://www.nusl.cz/ntk/nusl-403903.

Повний текст джерела

Анотація:

The theme of this diploma thesis is " Contracting autonomy in construction of types of shares and its limits". Its aim was to analyse the domestic legal regulation and to clarify the limits in the construction of types of shares. To achieve this aim, the author tried to interpret the limits of the key provisions of the Business Corporation Act with the support of professional literature and comparisons with foreign legal systems, especially with the United Kingdom. The aim of the thesis was fulfilled. The key provisions were analysed, and the limits were set. The author of the thesis concluded

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Cho, Tomas, and 曹偉浪. "Design Optimization of Screw Position on the Fixation Stability of Locking Compression Plate for the Treatment of Femoral Shaft Fracture using FEA-based DPSO algorithm." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/rh4t56.

Повний текст джерела

Анотація:

碩士<br>國立臺灣科技大學<br>機械工程系<br>99<br>Locked compression plates (LCP) have been widely used for a diaphyseal femoral fracture treatment and showed an improved fixation in osteoporotic bone. The clinical experiences have been used to investigate the fixation stability of the bone by considering several numbers and positions of the screws in the twelve-hole LCP. In fact, there are a lot of possible locations which can be placed in the plate holes. As an example, for six screws in the twelve-hole plate, there would be 924 possible locations of the screws. The purpose of this study is to discover the b

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Kristanová, Lenka. "Smluvní autonomie při konstrukci druhů akcií a její limity." Master's thesis, 2016. http://www.nusl.cz/ntk/nusl-353345.

Повний текст джерела

Анотація:

The theme of this diploma thesis is "Contracting autonomy in construction of classes of shares and its limits". Its aim is to answer the question to what extent is the contracting autonomy of shareholders limited, when it comes to construction of classes of shares. The answer is being found by means of a negative analysis that lists both statutory and case-law based limits that restrict that autonomy. It also presents legal consequences, from which suffer those classes of special shares that collide with the statutory provisions and the constructions of rights that are questionable or vague. T

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Ferreira, Emile. "A clinically controlled study investigating the effect of dry needling muscle tissue in asymptomatic subjects with respect to post-needling soreness." Thesis, 2006. http://hdl.handle.net/10321/341.

Повний текст джерела

Анотація:

Thesis (M.Tech.: Chiropractic)- Dept. of Chiropractic, Durban Institute of Technology, 2006. 88 leaves.<br>Myofascial pain syndrome is the second most common reason patients seek the help of health care workers. It costs billions of dollars each year in lost revenue due to loss of productivity and other costs. The treatment of myofascial pain syndrome has been extensively researched and it appears that dry needling and medicinal injections of trigger points are some of the most effective modalities. However, an unwanted side effect common to both these therapies is post-needling soreness.

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!