Увійти

Готові списки джерел за темами / Various Loads / Дисертації

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Various Loads.

Дисертації з теми "Various Loads"

Автор: Grafiati

Опубліковано: 3 червня 2025

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-41 дисертацій для дослідження на тему "Various Loads".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Ogden, Cedric A. "Comparing emissions of a propane engine at various speeds and loads /." Available to subscribers only, 2006. http://proquest.umi.com/pqdweb?did=1240701741&sid=1&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Elliott, Robin James. "Stability and metabolic analysis of walking on cross-slopes with various vertically placed backpack loads and without loads." Thesis, The University of Utah, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10248968.

Повний текст джерела

Анотація:

<p> Though many who walk along roadside cambers and hill edges may have an interest in making their travels sure and effective, those most concerned may be soldiers in the infantry. They need to be injury free and have as much energy as possible when they march into battle.</p><p> Walking on uneven ground without being injured by falling down (particularly with a heavy backpack) is generally accomplished by maintaining stability. This present study was conducted to determine an individual’s most stable position (using a stability formula which compares dynamic center of mass with cente

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Majstorovic, Jordan Mitchell. "Top Tether: Dynamic Loads and the Effects of Various Parameters; Effectiveness in Side Impacts." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429646981.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

SAIYASITPANICH, PHIRUN. "INFLUENCE OF DIFFERENT APPLIED LOADS AND VARIOUS SULFUR LEVELS IN DIESEL FUELS ON DIESEL PARTICULATE EMISSIONS." University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1064408436.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Puszko, Gregory D. "Terramechanical analysis of rover wheel mobility over simulated Martian terrain at various slip conditions and vertical loads." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/83739.

Повний текст джерела

Анотація:

Thesis (S.B.)--Massachusetts Institute of Technology, Department of Mechanical Engineering, 2013.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 44-45).<br>Unmanned Mars rovers are presented with the unique challenge of requiring autonomous driving control over rough, adverse territory. A software package, dubbed Artemis, was developed in order to model the expected forces and torques on a rover's drive wheels while traveling across unfamiliar Martian terrain. However, experimental testing must be done in order to validate this theoretical model. A test

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Cheong, H. K. "Lateraly confine concrete prisms under various load conditions." Thesis, Imperial College London, 1985. http://hdl.handle.net/10044/1/37658.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Rohleder, Schyler. "Performance analysis software for reinforced concrete beam-columns under various load and displacement patterns." Thesis, Kansas State University, 2016. http://hdl.handle.net/2097/34604.

Повний текст джерела

Анотація:

Master of Science<br>Department of Civil Engineering<br>Asad Esmaeily<br>Performance-based building design is a necessity in geographic locations where buildings are susceptible to large earthquakes and high winds. This design method requires an analysis of the performance of the structural system with loadings and deflections caused by earthquakes and wind. Current design codes include the load intensity in analysis procedures, but do not consider the effect of load pattern in the performance analysis of reinforced concrete columns. Because a thorough analysis must take into consideration loa

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Lou, Chin Wang. "Self-learning and adaptive electric load forecaster tackling various data uncertainties." Thesis, University of Macau, 2015. http://umaclib3.umac.mo/record=b3335456.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Boyko, I. I. "Characteristics of HIV load in various tissues of an infected organism." Thesis, БДМУ, 2020. http://dspace.bsmu.edu.ua:8080/xmlui/handle/123456789/18219.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Singh, Yuvraj. "Regression Models to Predict Coastdown Road Load for Various Vehicle Types." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1595265184541326.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Charla, Shiva Bhavani Reddy. "Examining Various Input Patterns Effecting Software Application Performance : A Quasi-experiment on Performance Testing." Thesis, Blekinge Tekniska Högskola, Institutionen för programvaruteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-13587.

Повний текст джерела

Анотація:

Nowadays, non-functional testing has a great impact on the real-time environment. Non-functional testing helps to analyze the performance of the application on both server and client. Load testing attempts to cause the system under test to respond incorrectly in a situation that differs from its normal operation, but rarely encountered in real world use. Examples include providing abnormal inputs to the software or placing real-time software under unexpectedly high loads. High loads are induced over the application to test the performance, but there is a possibility that particular pattern of

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Alluqmani, Ayed Eid. "Development of prediction and design models for wide concrete beams with various load and support widths." Thesis, University of Strathclyde, 2014. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=23508.

Повний текст джерела

Анотація:

In reinforced concrete (RC) structures, wide RC beams are used as primary structural members to support floor loads and to transfer forces from the floor to the vertical elements which are below them, e.g. columns and walls. In these cases, wide concrete beams may be loaded and supported by wide columns or walls (full-width loads and supports) and/or by narrow columns (partial-width loads and supports). In both cases of support and load conditions, the one-way (beam) and two-way (punching) shear capacities should be checked for wide RC members. For both wide and narrow load/support configurati

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Poutiainen, Zacharias. "Short-Term Heat Load Forecasting in District Heating Systems : A Comparative Study of Various Forecasting Methods." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-265670.

Повний текст джерела

Анотація:

Short term heat load forecasts are vital for optimal production planning and commitment of generation units. The generation utility also bares a balance responsibility toward the electricity market as a result of CHP generation. Sub-optimal load forecasts can lead to high costs relating to unit commitment, fuel usage and balancing costs. This thesis presents the empirical comparison of various models for 24h heat load forecasting. Five methods were investigated including four supervised machine learning algorithms; neural networks, support vector machines, random forests and boosted decision t

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Gaihre, Nirajan. "ANALYTICAL AND NUMERICAL MODELING OF FOUNDATIONS FOR TALL WIND TURBINE IN VARIOUS SOILS." OpenSIUC, 2020. https://opensiuc.lib.siu.edu/theses/2650.

Повний текст джерела

Анотація:

Wind farm construction is increasing progressively, to cope-up with the current global energy scenario. The advantage of clean energy and sustainability helps wind turbine construction to flourish rapidly. Location of wind turbines is independent of foundation soil condition but depends on the wind speeds and socio-environment issues. Hence, a construction sites may not be favorable in terms of geotechnical demands. The taller wind towers facilitate the generation of high energy production, which will increase loads on the foundation, and eventually increase the dimension of the foundation. He

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Stewart, Joyce. "Using technology to assist Mathematical Literacy learners understand the implications of various scenarios of loan circumstances when buying a house." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-83110.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Moradi, Eshkafti Milad Verfasser], and Hartmut [Gutachter] [Pasternak. "Influence of various welding sequence schemes on the load bearing capacity of square hollow section T-joint / Milad Moradi Eshkafti ; Gutachter: Hartmut Pasternak." Cottbus : BTU Cottbus - Senftenberg, 2018. http://d-nb.info/1151520985/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Lee, Moonsu. "Analytical models to evaluate system performance measures for vehicle based material-handling systems under various dispatching policies." Diss., Texas A&M University, 2005. http://txspace.tamu.edu/bitstream/handle/1969.1/2352/etd-tamu-2005A-INEN-Lee.pdf?sequence=1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Roth, George J. "Stability Analysis of a Constant Power Load Serviced by a Buck Converter as the Source Impedance Varies." Thesis, Monterey, California. Naval Postgraduate School, 2012. http://hdl.handle.net/10945/17451.

Повний текст джерела

Анотація:

Approved for public release; distribution is unlimited<br>As the NAVY moves forward with plans to become less dependent on fossil fuels and more dependent on hybrid electric drives and all-electric ships, being aware of the stability issues associated with direct current (DC)-DC and DC-alternating current (AC) power converters and understanding how to solve the issues that come with using them, are very important. The negative input impedance that is observed when using a buck converter servicing a constant power load (CPL) is one of the issues that needs to be understood. Understanding the st

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Bundschuh, Mirco [Verfasser], and Ralf [Akademischer Betreuer] Schulz. "Application of ozone as tertiary treatment step to reduce the load of micropollutants : an ecotoxicological assessment at various levels of ecological complexity = Ozonierung von Abwasser als tertiären Reinigungsschritt zur Reduktion der Mikroverunreinigungen / Mirco Bundschuh. Gutachter: Ralf Schulz." Landau : Universitätsbibliothek Landau, 2011. http://d-nb.info/1011799510/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Ching-Fang, Chang, and 張靜芳. "THE SPINAL CURVATUREUNDER VARIOUS LOADS IN DEADLIFT." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/67554606874059916174.

Повний текст джерела

Анотація:

碩士<br>國立臺灣體育學院<br>體育研究所<br>93<br>ABSTRACT 　　The purposes of this study were to estimate the deformation of spinal curve and to evaluate the strategies of weight-lifting in deadlift with different loading. Four males (age: 26.8 ± 3.3 years, height: 162 ± 5 cm, weight: 58.8 ± 5.8 kg) and four females (age: 21.5 ± 1.8 years, height: 162 ± 4 cm, weight: 61.3 ± 6.5 kg) who are national powerlifting athletes were recruited in this study. Each subject was asked to perform the deadlift in the motion laboratory with 30%, 50%, 70%, and 90% of his/her peak performance of deadlift. The VICON 612 motion an

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Ou, Yin-Sheng, and 歐寅生. "Body Loads of Various Shaking Postures While Shaking the Beverages." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/t4ayrd.

Повний текст джерела

Анотація:

碩士<br>明志科技大學<br>工業工程與管理系碩士班<br>103<br>This study preliminarily interviewed 4 respondents and collected 60 Nordic Musculoskeletal Questionnaire (NMQ) data of the beverages to understand the task procedure and their discomforts on various body sites. Therefore, twenty participants (10 males and 10 females) were recruited and requested to perform the simulated beverage shaking tasks under 3 shaking methods (upward shaking, curve shaking, and downward shaking) and 2 shake-cups (materials of PC and stainless steel). The wrist postures at various task combinations were analyzed, as well as the ease

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Waghmare, Ambadas Devrao. "Response of Plain and Reinforced Concrete Elements to Various Mechanical Loads." Thesis, 2019. https://etd.iisc.ac.in/handle/2005/5013.

Повний текст джерела

Анотація:

Reinforced concrete (RC) is being used for a wide range of structural applications. In order to design safe and economical RC structural elements it is necessary to analyse these elements accounting for the realistic phenomenon (cracking and crushing of concrete, strain-softening in plain concrete, aggregate interlock, dowel action, tension stiffening in RC, bond-slip, yielding of steel, etc.) under applied loading to capture the behaviour over the entire loading path. In this study, the improvisation needed in the form of a decrease in elastic modulus and increase in Poisson’s ratio in the si

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Homam, Sayed Mukhtar. "Fibre reinforced polymers (FRP) and FRP-concrete composites subjected to various loads and environmental exposures." 2005. http://link.library.utoronto.ca/eir/EIRdetail.cfm?Resources__ID=370907&T=F.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Chen, Jou-Heng, and 陳柔衡. "Free vibration analyses of Euler-Bernoulli beams subjected to axial loads and carrying various concentrated elements." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/82907729588645985898.

Повний текст джерела

Анотація:

碩士<br>國立成功大學<br>系統及船舶機電工程學系碩博士班<br>95<br>This thesis determines the natural frequencies and the corresponding mode shapes of an axial-loaded uniform or non-uniform beam carrying any sets of concentrated elements by using the numerical assembly method (NAM) with each set of concentrated element consisting of a lumped mass with eccentricity and rotary inertia, a translational spring and a rotational spring. First of all, a uniform or non-uniform beam is subdivided into many beam segments with any two adjacent beam segments joined at a node and each node is attached by one set of aforesaid concen

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Liu, Tai-Lin, and 劉玳伶. "Evaluation of Various Design Methods for Predicting Reinforcement Loads within Two Different Facing Stiffness Geosynthetic-Reinforced Soil Structures." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/m2frw3.

Повний текст джерела

Анотація:

碩士<br>國立臺灣科技大學<br>營建工程系<br>100<br>Proper estimation of reinforcement loads is a key to evaluate the internal stabilities of Geosynthetic-Reinforced Soil (GRS) structures. Prediction methods for reinforcement loads within GRS structures in current practice can be categorized into two approaches: force equilibrium approach (i.e., earth pressure method and limit equilibrium method) and deformation based approach (i.e., K-stiffness method and finite element method). Until today, the effects of these methods have not been extensively examined and compared yet. In this paper, the reinforcement loads

Стилі APA, Harvard, Vancouver, ISO та ін.

26

詹榮茂. "Analysis and applications of optimal load flow by various factors." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/66386323216851870034.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

NEMADE, MAYUR MADHUKAR. "EFFECT OF VARIOUS DESIGN PARAMETERS OF CHIMNEY UNDER WIND LOAD." Thesis, 2023. http://dspace.dtu.ac.in:8080/jspui/handle/repository/20006.

Повний текст джерела

Анотація:

This thesis investigates the impact of wind on high-rise chimneys, focusing on predicting wind loads and analysing the effects of varying chimney dimensions. Using computational fluid dynamics (CFD) simulations, the study considers variables such as wind speed, direction, turbulence, chimney shape, size, and parameter variations. Simulations were conducted using ANSYS CFX 2022 R2 and AutoCAD, covering wind incidence angles from 0 to 180 degrees. Pressure contours and coefficient of pressure (Cp) values were analysed to understand pressure distribution and wind-induced forces. Resu

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Todd, A. I., and P. A. Scott. "Metabolic responses to various combinations of gradient, load and marching speed." 2002. http://hdl.handle.net/10962/d1009331.

Повний текст джерела

Анотація:

This study examined the metabolic cost of South African soldiers carrying loads under various conditions of gradient and marching speed. Thirty-two male soldiers participated in the study. Three speed and load combinations, 4, 5 and 6 km.h[superscript (-1)] carrying of 50, 35 and 20 kg respectively, were imposed, on each of three gradients: -10%, 0% and +10%; a total of nine experimental conditions. Subjects wore standardized military uniforms and breathed into a portable ergospirometer (Metamax) for the duration of each condition. Subjects were required to march for six minutes under each con

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Wu-BIng-Ze and 吳秉澤. "Effect of Prolonged standing types on lower extremity load Under various body physiques." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/68931807154117083688.

Повний текст джерела

Анотація:

碩士<br>明志科技大學<br>工業工程與管理系碩士班<br>102<br>This study recruited 20 healthy male participants (10 of each BMI in normal and overweight) to examine their shank circumference increases of every 20 min under two prolonged standing conditions, namely static standing and intermittent standing (with 1 min resting after every 20 min standing), for 2 hr. Results show that prolonged standing type, physique, and sustained time significantly affected the participants’ shank circumference increases (all p<.001). No interactions were observed in the analyses. Increases in shank circumference were lower (0.44 cm)

Стилі APA, Harvard, Vancouver, ISO та ін.

30

YEH, GEN-YUNG, and 葉根元. "STRESS SINGULARITIES RESULTING FROM VARIOUS BOUNDARY CONDITIONS OF WEDGE COMPOSITE PLATES UNDER TRANSVERSE LOAD." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/50222594472913533957.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Shembesh, Marwa A. "Retention strength, failure load, and fatigue of various ceramics and cement combinations to titanium." Thesis, 2021. https://hdl.handle.net/2144/42845.

Повний текст джерела

Анотація:

OBJECTIVE: The objective of this in vitro study is to assess the bond between titanium and various ceramic materials as well as the failure load, and fatigue of bonded abutment materials. MATERIALS AND METHODS: Part I: A titanium pin (Grade V Ti alloy, 6.4 mm high, 8.2° taper) was scanned using the Sirona Inlab scanner software version SW4.2.5. A crown (tooth #19) was designed to fit the pin and machined using four crown materials (Ivoclar e.max, Vita Enamic, Vitablocs Mark II, and Sirona inCoris zirconia). Pins were held in a CNC machine to reproducibly sandblast each pin at the same sp

Стилі APA, Harvard, Vancouver, ISO та ін.

32

El, Menoufy Adham Mohamed. "Creep Behaviour of Post-Installed Adhesive Anchors under Various Sustained Load Levels and Environmental Exposures." Thesis, 2010. http://hdl.handle.net/10012/5348.

Повний текст джерела

Анотація:

This thesis describes an experimental study on the long-term creep behaviour of adhesive anchors under sustained tensile loads in combination with different environmental exposures. A comprehensive background and literature review is presented, focusing on various bond stress models for adhesive anchors, factors affecting their bond behavior, and an overview of available testing standards and evaluation criteria. The experimental program comprises of 82 test specimens. The specimens consist of a cylindrical shaped concrete block of 300 mm (12 inch) in diameter and 200mm (8 inch) in depth, with

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Li, Chih-Hao, and 李智皓. "Analysis of Air Conditioning Load of Single House with Various Building Envelopes in Yilan Area." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/03422054361309920933.

Повний текст джерела

Анотація:

碩士<br>國立宜蘭大學<br>建築與永續規劃研究所碩士班<br>101<br>In order to counteract the threats created by global warming to our environment, the issue of how to conserve energy and minimize the carbon emission as well as seek for sustained development for environment has become important throughout the world. Nevertheless with raised standard in people living quality, air conditioning is the indispensible element for all homeowners therefore the annual growth found in the air conditioning load would indirectly cause undue stress to the environment hence how to reduce the air conditioning load would become one of

Стилі APA, Harvard, Vancouver, ISO та ін.

34

RAO, PING-HAI, and 饒平海. "A study into the relationships between various load-intensities and barbell velocities on back jerk." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/49ywek.

Повний текст джерела

Анотація:

碩士<br>國立體育大學<br>競技與教練科學研究所<br>107<br>Purpose: The purpose of this study investigated the reliability of the load–velocity relationship to predict the back jerk (BJ) movement one repetition maximum (1RM). Method: Subjects were sixteen trained strength males of which were at least one years’ experience (age: 25.1 ± 3.3, high: 173.9 ± 5.0cm, weight: 77.7 ± 14.5kg). performed four 1RM test with each trial separated by 48 hours, except for familiarization session (1 week). 1RM trials comprised lifts from six relative loads, including 50, 60, 70, 80, 90, and 100% 1RM, utilize linear transducer to co

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Lin, Yu-xian, and 林育賢. "Experimental Study of Load-Carrying Capacities and Failure modes of Various Falseworks used in Building Construction." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/85289617971321025595.

Повний текст джерела

Анотація:

碩士<br>國立雲林科技大學<br>營建工程系碩士班<br>100<br>In the building construction, the selection from different types of falseworks is always based on the headroom of the buildings. Generally speaking, the 1-layer shoring system is for headroom under 4 m, 2-layer system for headroom 4 m~ 7m, and blended scaffolds for headroom over 7 m. The failure models and load capacities of these falseworks are different due to their installations. This research mainly investigates load capacities and failure models of these falseworks by experimental tests. Based on the setup of currently domestic construction situations,

Стилі APA, Harvard, Vancouver, ISO та ін.

36

張鴻鈞. "The Influence of Thermal-Cycle and Load Sequence on Fatigue Life of Various Lay-up Carbon/Epoxy Laminates." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/66407179860597230699.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Lee, Shih-Chang, and 李士璋. "EndoFEM Simulations of Crack Growth Induced Plastic Wake and Closure Load on Al2024-T3 CCT Specimen under Various Stress Ratios." Thesis, 1995. http://ndltd.ncl.edu.tw/handle/22482460963764766101.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Al-Angari, Nadia 1982. "Effects of Various Thicknesses on Load to Fracture of Posterior CAD/CAM Lithium Disilicate Glass Ceramic Crowns Subjected to Cyclic Fatigue." Thesis, 2015. http://hdl.handle.net/1805/6495.

Повний текст джерела

Анотація:

Indiana University-Purdue University Indianapolis (IUPUI)<br>Background: New glass ceramics and Computer-Aided Design/Computer Assisted Manufacture (CAD/CAM) have become common aspects of modern dentistry. The use of posterior ceramic crowns with a high level of esthetics, fabricated using the CAD/CAM technology is a current treatment modality. Several materials have been used to fabricate these crowns, including lithium disilicate glass-ceramics, which have not been fully investigated in the literature. Objective: to investigate the load to fracture of lithium disilicate glass ceramic poste

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Su, Chin-Yen, and 蘇琴硯. "Numerical simulation study for the performance of a Large Solar Hot Water System with a Stratification Storage Tank for Various Load time." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/28779804165998380216.

Повний текст джерела

Анотація:

碩士<br>國立中山大學<br>機械與機電工程學系研究所<br>101<br>In order to reduce global warming, the development of renewable energy sources is imperative. One of the most viable solar energy utility is the solar hot water system. In this study, a three-dimensional CFD program is employed to simulate the field in the storage tank of a large solar hot water system. The storage tank simulation is coupled with a system simulation program, TRNSYS, to simulate the entire solar hot water system. The parameters for the storage tank including the number of stratification baffles in the tank and the location of hot water

Стилі APA, Harvard, Vancouver, ISO та ін.

40

MENDLOVÁ, Olga. "Redcord na vozíku." Master's thesis, 2015. http://www.nusl.cz/ntk/nusl-187931.

Повний текст джерела

Анотація:

Diploma thesis deals with a suspension system of cords and slings called Redcord. Redcord helps physiotherapists as their auxiliary third hand. Redcord has a wide range of application. The main goal of the thesis is to develop and test training units in Redcord for spinal patients on a wheelchair in the Rehabilitation Institute Kladruby. This goal was successfully realized and the group exercise in Redcord were implemented between the procedures of the rehabilitation program. The study also discusses the effectiveness of exercise in Redcord, the evaluation of different dosage of load and monit

Стилі APA, Harvard, Vancouver, ISO та ін.

41

"Neural activity associated with controlled and automatic attention varies with age, working memory capacity and perceptual load." Tulane University, 2010.

Знайти повний текст джерела

Анотація:

Behavioral studies in young adults have shown that working memory capacity (WMC), the ability to maintain and manipulate items in memory, may be associated with individual differences in selective attention. Changes in WMC may also reflect reduced controlled attention and/or increased distractibility observed in aging. Age and individual differences in selective attention may be further modulated by bottom-up manipulations of perceptual load. This project assessed the neural basis of age and individual differences in WMC by measuring auditory (N100) and long-latency (P300, slow wave) event-rel

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!