Dissertations / Theses on the topic '擬像'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 22 dissertations / theses for your research on the topic '擬像.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
CHEN-ZHAN, JIU-EN, and 陳湛久恩. "紅外線影像模擬." Thesis, 1987. http://ndltd.ncl.edu.tw/handle/60602019211251265515.
Full textZHANG, XIAN-MIN, and 張憲民. "以模擬干涉圖顯示像差." Thesis, 1985. http://ndltd.ncl.edu.tw/handle/55315347202357882988.
Full textKUO, WU-YUNG, and 郭武勇. "以MATLAB模擬紅外線成像系統." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/30646070810331510490.
Full text國防大學中正理工學院
應用物理研究所
93
Based on the understanding of algorithm of zone plate theory with zone plate encoded imaging theory, this thesis reveals both the possibility of the building up an infrared (1.5μm) imaging system and the essential parameters of the imaging system within our C3HOG Lab. This encoded imaging system has been simulated with MATLAB software, into which is divided four subsystems：object, encoded zone plate, encoded object shadow and imaging reconstruction. In this thesis , these four subsystems have been simulated successfully, and through the synthesis of the near infrared (1.5μm) encoded imaging system, the essential parameters have been obtained： Object：planar size less than 5 cm and imaging point should not be overlapped. Zone plate：80 zones, 2.5 cm in radius. Shadow：25 cm . Imaging reconstruction：340x340 pixels, time-consuming 435 sec (PC：Intel Pentium III、731MHz、512MB RAM). Planar resolution：7 pixels (0. 1029 cm).
宋詩盈. "台製偶像劇的本質與「擬像」－以流星花園為例." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/85764227276647990195.
Full textHsiao-Jie, Kwen, and 桂曉潔. "熱成像系統光學效能模擬之研究." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/00120143079716600133.
Full text國防大學中正理工學院
兵器系統工程研究所
94
With the development of infrared technology, infrared system of all sorts of design has already been extensively used in military, industry, medical science and science research. It gives better accuracy and easy of use for Non-destructive testing, environmental monitoring, air monitoring and so on. Especially for military application, thermal imaging research has received noticeable attention for every nation. The night vision equipment has become indispensable weapons in today’s battlefield, which is critical for winning the battle at day and night. There are majorly three catagories of night vision equipments developed that are infra-periscope, night vision goggle and thermal imaging system. However, only the last two types are still in service. Specially for thermal imaging system, which has some characteristics as passive in nature, no fear of strong light, good penetration of smog and dust, and good camouflage ability compared to visible light. The thermal imaging system is still much expensive compared to the night vision google. However with the fast development of thermal imaging technology, the manufacture cost is hoped to be down and more popular used. In this paper, we will study the imaging performance factors of an infrared system by using the Infrared radiation theorem. In addition, an opto-mechanical system of a tank thermal imager will be rebuilt by using the concept of optical system design and computer simulation, to examine the critical factors of imaging quality. The simulation results were also studied to give better understanding of the imaging system evaluation and analyze, and providing references for future weapon design.
CHEN, ZHI-SONG, and 陳志松. "MOS陳列影像感測元件之模擬分析." Thesis, 1991. http://ndltd.ncl.edu.tw/handle/60354372570637015187.
Full textChang, Vanisa, and 張家茹. "台灣網路虛擬偶像之行銷策略研究." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/65617642152753160163.
Full textHE, YU-ZHANG, and 何玉璋. "合成口徑雷達訊號成像處理及模擬." Thesis, 1987. http://ndltd.ncl.edu.tw/handle/07390002486646476786.
Full textLIN, HONG-YOU, and 林鴻祐. "知識份子在擬像社會中的社會責任." Thesis, 1991. http://ndltd.ncl.edu.tw/handle/57278597026205813826.
Full text黃德昌. "影像處理與虛擬實境在醫學上的應用." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/76267349872963312392.
Full textZHU, JIN-YI, and 朱晉儀. "二維複雜物體之散射場計算及成像模擬." Thesis, 1989. http://ndltd.ncl.edu.tw/handle/40001968211656272209.
Full textWu, Yi-Ying, and 吳怡瑛. "中華二號衛星影像幾何模擬及方位重建." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/28314639823857039050.
Full text國立中央大學
土木工程研究所
88
The objective of this investigation has two folds. One is to simulate ROCSAT-2 images and the other is to develop a applicable model for geometric correction to ROCSAT-2 images. We will use orthorectified aerial image and digital terrain model as referance data to perform imaging simulation. This is due to the unavailability of ROCSAT-2 image. For ROCSAT-2 image and on-board data simulation, we need to establish a satellite-orbit-model. This model can be divided to four parts. The fisrt one is coordinate-transformation-model which transforms all coordinate systems in this investigation. The second one is satellite-fly-model which describes the satellite orbit. The third one is simulmation-model which simulates ROCSAT-2 image and on-board data. The fourth one is on-board-data-model which simulates on-board data by assuming ROCSAT-2 flying case and adding errors to satellite position and attitude data. The errors include systematic errors and random errors. We compute orientation parameters and position using simulation data. In single image case, we use on-board data to establish initial orbit and correct the orbit with ground control points. Then we use least squares filtering to fine tune the orbit and perform the validation. In stereo images case, we adjust 3-D position in object space by using least squares filtering after correcting orbits of two images. Then the validation is performed.
Tsai, Shang-Hsiu, and 蔡尚修. "合成口徑雷達影像之人工建物分析與模擬." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/92476876706974046780.
Full text國防大學理工學院
空間科學碩士班
98
Image interpretation is aimed at gathering necessary information in efficient ways, and making full use of images. Synthetic Aperture Radar (SAR) is one kind of active systems; it can be used in all-day and all-weather, and offer information that is different from optic systems. Nowadays, the resolution of radar imagery is being improved significantly, so this thesis considers the characteristics of SAR imaging geometry, analyzes artificial targets, and shows the results of SAR image simulators. In order to assist SAR image interpretation by understanding the features of targets, the geometric and radiometric characteristics of SAR imagery are analyzed. The primitive simulation results have shown that：The incidence angle of radar and the size and shape of targets can change the corresponding image features of targets. If the relative orientation of radar and targets is taken into consideration, the correlation between the real and simulated images can be improved.
"傳統的擬像: 從當代藝術的混雜性反思傳統." 2007. http://library.cuhk.edu.hk/record=b5893235.
Full text"2007年8月".
論文(藝術碩士)--香港中文大學, 2007.
參考文獻(leaves 46-48).
"2007 nian 8 yue".
Abstract also in English.
Liang Jiaxian.
Lun wen (Yi shu shuo shi)--Xianggang Zhong wen da xue, 2007.
Can kao wen xian (leaves 46-48).
Chapter (一） --- 前言：一覺之間的疑 惑 --- p.1
Chapter (二） --- 知覺：傳統的定義與印 象 --- p.4
Chapter 2.1 --- 神聖的規範
Chapter 2.2 --- 印象與符號
Chapter (三） --- 超越真實：傳統影像的再現與接 收 --- p.8
Chapter 3.1 --- 眼前的傳統
Chapter 3.2 --- 真實以外
Chapter 3.3 --- 符號慣性
Chapter (四） --- 相遇：當代藝術形態中的混雜模 式 --- p.17
Chapter 4.1 --- 從二元到多元的混雜
Chapter 4.2 --- 文化超市
Chapter (五） --- 再探：從混雜藝術中重拾傳統的意 義 --- p.25
Chapter 5.1 --- 傳統精神融合其他媒介，擴展傳統藝術思想
Chapter 5.2 --- 以傳統元素審視傳統
Chapter 5.3 --- 利用傳統的文化價値確立個人身分
Chapter 5.4 --- 傳統作爲創作材料的一部分
Chapter (六) --- 結論 --- p.40
Chapter 6.1 --- 創作者的起點
Chapter 6.2 --- 混雜藝術的位置
Chapter 6.3 --- 危與機的邊緣
參考書目 --- p.46
附錄 --- p.49
WU, SHEN-SI, and 吳慎思. "光學設計中波前多項式之模擬與像質評價." Thesis, 1989. http://ndltd.ncl.edu.tw/handle/58260817321757094117.
Full text林木豪. "紅外線立體影像動態模擬模式之建立與應用." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/33314882373925652378.
Full text陳允麾. "含房屋之中華二號衛星影像幾何模擬及校正." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/77820513540717641820.
Full text國立中央大學
土木工程研究所
89
The focus of this investigation is the geometric correction for the ROCSAT-2 high resolution satellite images. We correct satellite images using digital surface model (DSM) that includes building and terrain information. Unlike frame photography, where all pixels in the image are exposed simultaneously, each line of a high resolution satellite image is collected in a pushbroom fashion at a different instant of time. Due to unavailability of test data, we need to simulate a high resolution satellite image which considers that the terrain and the building may be hidden each other test, due to we don’t have a applicable data. First of all, we used a satellite-orbit-model of ROCSAT-2, including coordinate-transformation-model, satellite-fly-model, simulation-model and on-board-data-model, and DSM to simulate a high resolution satellite images by Bottom-up approach. In addition, the bases of the simulated image are orthorectified aerial images to minimize differences between the simulate image and the true image. Once imaging simulation had completed, we will use a satellite-orbit-model of ROCSAT-2 and DSM to orthorectify the simulated high resolution satellite''s image by Bottom-up.
DAI, NAN-ZHENG, and 戴南正. "大氣資料及影像處理在擴散模擬應用上之研究." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/02552650681404031533.
Full text杜進安. "低位元率動態影像壓縮編碼國際標準-H.261模擬研究." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/33373569751079495427.
Full textChen, Da-ge, and 陳大戈. "影像式虛擬實境的製作流程探究——以優人神鼓VR奔騰為例." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/zn394z.
Full text國立政治大學
數位內容碩士學位學程
106
With the rapid advancement of information technology, Virtual Reality technology is widely used in all walks of life. This study is aiming at the exploration of the production process of image-based virtual reality, the application of image synthesis and digital special effects technology, and the design and creation of the work "Utheatre VR Pentium" through relevant background research and literature research, combining performance art with ancient poetry animation in the style of ink painting. This paper will cover the background, motivation, purpose and method of creative research in the introduction. In literature review part, it will include the development and application of virtual reality, presentation and comparison of image-based VR production methods, and image synthesis, the development and introduction of digital special effects, and virtual reality related works containing digital special effects. In the end, in the creation concept and production method part, we will discuss the creation research and planning, the production process of digital special effects, the shooting and production of panoramic images, the image rendering and format encoding of virtual reality, etc. The research findings and contributions of the paper conclude: summarizes the main points of digital effects in image-based virtual reality, the 360° panoramic image shooting process, and 360° panoramic image rendering. Moreover, it provides the production process and experience of individual users to image-based virtual reality production processes and software field as reference data.
ching, Lin chao, and 林朝慶. "合成聚焦影像掃描於混凝土結構缺陷檢測之三維數值模擬與實驗研究." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/18254323153963260534.
Full textYang, Chi-yin, and 陽季吟. "探討電腦模擬實驗和動手操作實驗對概念學習之影響－以八年級「透鏡成像」單元為例." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/83907405883491828911.
Full text國立臺灣師範大學
科學教育研究所在職進修碩士班
95
The purpose of this study was to investigate and compare the development of eighth graders’ conceptual understandings about lens and imaging in two learning environments. Seventy students participated in this study and were divided into two groups. In one group, 35 students worked in pairs and used computer simulations to learn (computer group), while in the other group 35 students worked in groups of three and engaged in hands-on experiments (experiment group). Multiple sources of data were collected and analyzed (e.g. concept pre- and post-tests, questionnaires, semi-structural interviews, classroom videotaped and worksheet of experiment). The results showed that students in both groups improved significantly from the pre-test to the post-test, but there appeared no significant difference between the two groups in post-tests. The results showed that both computer simulation and hands-on experiment learning environments helped improve students’ learning achievement. Computer simulations could generate visuals and represent abstract concepts to help students understand complex and abstract ideas. On the other hand, hands-on experiments supported students’ understandings about concrete and observable concepts and enhanced the development of experimental skills through practical experiences. The findings suggest that both learning environments promoted students’ conceptual understandings and provided students with different opportunities for science learning. Implications for science teaching are also discussed and provided in the study.