Log in

Relevant bibliographies by topics / 2%Bleaching powder solution

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers
Reports

Academic literature on the topic '2%Bleaching powder solution'

Author: Grafiati

Published: 5 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '2%Bleaching powder solution.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "2%Bleaching powder solution"

1

Das, Ashish Kumar, Zinia Sultana, Ahamed Kabir, and Md Shahidul Kabir. "Effect of Washing on Reducing Bacterial Loads in Common Vegetables Sold in Dhaka City." Bangladesh Journal of Microbiology 35, no. 2 (2019): 96–101. http://dx.doi.org/10.3329/bjm.v35i2.42637.

Full text

Abstract:

Vegetables and fruits can be contaminated with microorganisms from different sources during production and processing. Quality of vegetables usually relies on the quality of processing water and sanitizers used to reduce microbial load and increase shelf-life of vegetables. The present study demonstrates the role of washing on reducing bacterial loads in common vegetables sold in Dhaka city. A total of seventy two samples comprising of eighteen types of fresh vegetables were collected. Total heterotrophic bacteria, coliforms and Enterobacteriaceae were determined in 72 samples including potato

APA, Harvard, Vancouver, ISO, and other styles

2

Rahman, MM, AA Khan, IH Mian, AM Akanda, and MZ Alam. "Effect of some chemicals on incidence of poato soft rot disease in Bangladesh." Bangladesh Journal of Scientific and Industrial Research 52, no. 2 (2017): 135–40. http://dx.doi.org/10.3329/bjsir.v52i2.32936.

Full text

Abstract:

Bactericidal effect was investigated by chemicals against potato soft rot bacteria in vitro and in storage. The chemicals were acetic acid, boric acid, bleaching powder, lactic acid, calcium hydroxide, calcium chloride, potassium chloride and sodium hypo-chloride. Among eight chemicals only three chemicals viz. acetic acid, boric acid and bleaching powder showed bactericidal activity against potato soft rot bacteria Pectobacterium carotovorum subsp. carotovorum (E. carotovora subsp. carotovora) P-138 in vitro. Based on the results of in vitro experiment three chemicals, acetic acid, boric acid

APA, Harvard, Vancouver, ISO, and other styles

3

Sergey, Kozak. "Justification for immersion tanks usage in poultry meat processing." Poultry and Chicken Products 24, no. 2 (2022): 46–48. http://dx.doi.org/10.30975/2073-4999-2022-24-2-46-48.

Full text

Abstract:

Immersion tanks usage expediency is justified in primary poultry processing department. It is proved that this tanks usage with 0.07% peracetic content solutions of technologic aid means in poultry slaughtering department gives the possibility to decrease carcasses surface insemination after defeathering by 34.7% with 10 s exposition and solution temperature 35±2°C and to decrease insemination by 48.34% before cooling bath with 9 s exposition and solution temperature 9±1°C. Additional antimicrobial carcasses treatment doesn’t change its sensory qualities except the surface weak bleaching.

APA, Harvard, Vancouver, ISO, and other styles

4

Li, Cheng-Ai, Boemjin Ko, Kwang-Hyun Park, et al. "High-Performance Electrochromic Devices Based on Size-Controlled 2D WO3 Nanosheets Prepared Using the Intercalation Method." Materials 17, no. 1 (2023): 41. http://dx.doi.org/10.3390/ma17010041.

Full text

Abstract:

It is difficult to obtain ultrathin two-dimensional (2D) tungsten trioxide (WO3) nanosheets through direct exfoliation from bulk WO3 in solution due to the strong bonding between interlayers. Herein, WO3 nanosheets with controllable sizes were synthesized via K+ intercalation and the exfoliation of WO3 powder using sonication and temperature. Because of the intercalation and expansion in the interlayer distance, the intercalated WO3 could be successfully exfoliated to produce a large quantity of individual 2D WO3 nanosheets in N-methyl-2-pyrrolidone under sonication. The exfoliated ultrathin W

APA, Harvard, Vancouver, ISO, and other styles

5

K., S. Beenakumari. "Photocatalytic activity of nano sized nickel tin oxide prepared by co-precipitation method." Journal of Indian Chemical Society Vol. 91, Oct 2014 (2014): 1937–41. https://doi.org/10.5281/zenodo.5733899.

Full text

Abstract:

Department of Chemistry, All Saints’ College, Thiruvananthapuram-695 007, Kerala, India <em>E-mail </em>: beenagireesh@yahoo.co.uk <em>Manuscript received online 09 May 2014, revised 21 May 2014, accepted 22 May 2014</em> Visible light induced nano sized nicke tin oxide (NiSnO<sub>3</sub>) photocatalysts was synthesized by a simple and organic free co-precipitation method from a bath contains equimolar mixture of nickel and tin ions. The crystallographic property of synthesized nickel tin oxide powder was studied using X-ray diffraction technique. The particle size calculated based on th

APA, Harvard, Vancouver, ISO, and other styles

6

Zaror, C., V. Carrasco, L. Perez, G. Soto, M. A. Mondaca, and H. Mansilla. "Kinetics and toxicity of direct reaction between ozone and 1,2-dihydrobenzene in dilute aqueous solution." Water Science and Technology 43, no. 2 (2001): 321–26. http://dx.doi.org/10.2166/wst.2001.0106.

Full text

Abstract:

The presence of toxic aromatic organic compounds in industrial wastewater affects the efficiency of conventional biological treatment. The oxidizing power of ozone represents an interesting pretreatment to reduce toxicity and increase biodegradability. At low pH, ozone is known to attack electron-rich structures by direct electrophilic reactions which open aromatic rings, and generate smaller oxidized compounds. This paper reports experimental results on kinetic and toxicity aspects of ozone direct reactions with 1,2-dihydrobenzene. This toxic compound is frequently found in cellulose bleachin

APA, Harvard, Vancouver, ISO, and other styles

7

Zhang, Dongfang. "Heterogeneous photocatalytic removal and reaction kinetics of Rhodamine-B dye with Au loaded TiO2 nanohybrid catalysts." Polish Journal of Chemical Technology 14, no. 2 (2012): 42–48. http://dx.doi.org/10.2478/v10026-012-0069-2.

Full text

Abstract:

Heterogeneous photocatalytic removal and reaction kinetics of Rhodamine-B dye with Au loaded TiO2 nanohybrid catalysts Heterogeneous photocatalytic removal of Rhodamine-B (RhB) dye by metallic Au nanopatrticles deposited TiO2 photocatalyst was studied. For this study, a chemical reduction method by hydrazine hydrate for gold deposition was employed in order to synthesize Au/TiO2 nanocomposite system. For the characterization of the synthesized nanomaterials, X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), the Fourier transformatio

APA, Harvard, Vancouver, ISO, and other styles

8

Darni, Yuli, Lia Lismeri, Muhammad Hanif, Sarkowi Sarkowi, and Dita Synthauli Evaniya. "Peningkatan Kuat Tarik Bioplastik dengan Filler Microfibrillated Cellulose dari Batang Sorgum." Jurnal Teknik Kimia Indonesia 18, no. 2 (2020): 37. http://dx.doi.org/10.5614/jtki.2019.18.2.1.

Full text

Abstract:

Abstrak. Penelitian ini membahas tentang pengaruh rasio pati terhadap kitosan (dalam basis berat) dan konsentrasi microfibrillated cellulose sebagai filler dalam pembuatan bioplastik menggunakan pati sorgum, kitosan dan gliserol. Dalam penelitian ini, rasio pati terhadap kitosan yang divariasikan adalah 10:0, 9,5:0,5, 8,5:1,5, 7,5:2,5, 6,5:3,5, 5,5:4,5 (gr/gr). Microfibrillated cellulose sebagai filler disintesis dari batang sorgum dengan metode semimekanis. Perlakuan kimia diawali dengan delignifikasi batang sorgum dengan KOH 4% pada temperatur 80oC selama 1 jam untuk menghilangkan lignin. Se

APA, Harvard, Vancouver, ISO, and other styles

9

Razsamakin, A. V., V. I. Gots, I. I. Rudenko, and О. G. Gelevera. "THE ROLE OF CaCO3 IN THE FORMATION OF STRENGTH AND DECORATIVE PROPERTIES OF POWDER ALKALINE-ACTIVATED SLAG CEMENT CONCRETE." Modern construction and architecture, no. 9 (September 30, 2024): 71–81. http://dx.doi.org/10.31650/2786-6696-2024-9-71-81.

Full text

Abstract:

The article discusses approaches to the formation of compositions of alkali-activated decorative Portland slag cements containing Portland cement type CEM1 5...45% with high performance and decorative properties. The optimization of the compositions of decorative alkali-activated Portland slag cements was carried out using statistical methods for designing experiments. Finely dispersed TiO2 and CaCO3 additives with a whiteness of 90% were used as bleaching components. The alkaline component is sodium metasilicate in the form of a non-hygroscopic powder. The research carried out made it possibl

APA, Harvard, Vancouver, ISO, and other styles

10

Xu, Xianmeng, Dandan Zhang, Xiaohua Liu, Rong Zheng, and Tingqi Jiang. "Ultrasonic-Assisted Extraction and Antioxidant Evaluation of Resveratrol from Peanut Sprouts." Processes 12, no. 10 (2024): 2295. http://dx.doi.org/10.3390/pr12102295.

Full text

Abstract:

The orthogonal array design method was used to optimize ultrasonic-assisted extraction of resveratrol from peanut sprouts. The results showed that the highest extraction yield of resveratrol using ultrasonic-assisted extraction could be up to 1.1%. The optimal extraction conditions were liquid to solid ratio of 30:1 (mL/g) and ethanol concentration of 80% (v/v) as solvent for 40 min at the temperature of 70 °C. AB-8 macroporous adsorption resin was used to purify the crude extract and the resveratrol content increased to 47.5% after one treatment run. The optimal adsorption parameters were ini

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "2%Bleaching powder solution"

1

Ekstrand, Åsa. "Novel powder-coating solution to improved micro-structures of ZnO based varistors, WC-Co cutting tools and Co/Ni nano-phase films and spongs /." Uppsala : Acta Universitatis Upsaliensis : Univ.-bibl. [distributör], 2002. http://publications.uu.se/theses/91-554-5275-2/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "2%Bleaching powder solution"

1

Geng, Ying, Li Peng, and Yujing Ou. "Experimental study on the preparation of sodium silicate solution using microsilica powder." In Advances in Civil Engineering and Environmental Engineering, Volume 2. CRC Press, 2023. http://dx.doi.org/10.1201/9781003383031-39.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kaduk, James A. "Ab initio structure solution using synchrotron powder diffraction." In Reference Module in Chemistry, Molecular Sciences and Chemical Engineering. Elsevier, 2022. http://dx.doi.org/10.1016/b978-0-12-823144-9.00138-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Khemakhem, Sabeur. "Preparation and Evaluation of Hydrophobic Grafted Ceramic Membrane: For Application in Water Desalination." In Wastewater Treatment. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.104899.

Full text

Abstract:

A new inorganic hydrophobic porous membrane was prepared and applied in desalination with the air-gap membrane distillation process. Ceramic supports from low-cost natural Tunisian sand have been elaborated by the extrusion method. The microfiltration layer has been elaborated from ZrO2 powder by slip casting technical using a solution of water, sand powder, and polyvinyl alcohol solution. The hydrophobic surface of the active layer was elaborated by grafting 1H,1H,2H,2H-perfluorodecyltriethoxysilane on the ceramic microfiltration membrane surface (Tunisian Sand/Zirconia), to prepare a hydroph

APA, Harvard, Vancouver, ISO, and other styles

4

Sahu, Ashish Kumar, Sudipta Swain, Saurav Datta, and Kaushik Kumar. "Effect of Ageing Temperature on Microstructure and Microhardness of L-PBFed 18Ni(300) Maraging Steel." In Modeling, Analysis, and Control of 3D Printing Processes. IGI Global, 2025. https://doi.org/10.4018/979-8-3373-0533-2.ch016.

Full text

Abstract:

This study investigates the aging response of Maraging Steel 300 fabricated via Laser-Powder Bed Fusion (L-PBF). The as-built specimens undergo a post-heat treatment sequence comprising Solution Treatment (ST) at 840 °C for 2 hours followed by water quenching and subsequent Aging Treatment (AT) at 450 °C, 490 °C, and 550 °C for 2 hours each. The effect of post-heat treatment on microstructure and microhardness is analyzed, revealing a solidification sub-structure with semi-elliptical overlapped Melt Pool Boundaries (MPBs) and fine columnar dendritic/cellular grain morphology due to thermal gra

APA, Harvard, Vancouver, ISO, and other styles

5

Gurung, Dinesh, Md Shafinur Murad, Nivedhan Ravi, et al. "Sulfonated PEEK Fiber Reinforced Composites for Increased Thermal and Mechanical Properties." In Proceedings of the 2023 International IEMS Conference, March 5-7, 2023. Wichita State University, 2023. http://dx.doi.org/10.62704/10057/26124.

Full text

Abstract:

Polyetheretherketone (PEEK) is a special set of thermoplastic polymers that possess fascinating mechanical, chemical, and electrical properties for various industries, such as aircraft, biomedical, automotive, satellite, energy, and defense. Recently, sulfonated PEEK (SPEEK)-based fiber-reinforced composites have been designed and fabricated for the same purposes. However, manufacturing PEEK fiber composites is considerably difficult because of the inertness and high melting point of PEEK; thus, the sulfonation process is a necessary step to make the PEEK composites in many cases. About 5 wt%

APA, Harvard, Vancouver, ISO, and other styles

6

Ali, Akbar, Aleksey Kuznetsov, Muhammad Ibrahim, et al. "Chemistry and Modern Techniques of Characterization of Co-Crystals." In Drugs Modification via Co-crystallization [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.108694.

Full text

Abstract:

Co-crystals are multicomponent molecular materials held together through non-covalent interactions that have recently attracted the attention of supramolecular scientists. They are the monophasic homogeneous materials where a naturally occurring pharmaceutical active ingredient (API) and a pharmaceutically acceptable co-crystal former are bonded together in a 1:1 via non-covalent forces such as H-bonds, π–π, and van der Waals forces. Co-crystallization is a promising research field, especially for the pharmaceutical industry, due to the enormous potential of improved solubility and bioavailabi

APA, Harvard, Vancouver, ISO, and other styles

7

Senzaki, Tatsuya, Michiaki Matsukawa, Takanori Yonai, et al. "Functional Materials Synthesis and Physical Properties." In Recent Perspectives in Pyrolysis Research. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.100241.

Full text

Abstract:

A citrate pyrolysis technique is a unique route to prepare reactive precursor mixtures through an ignition process of concentrated aqueous solution. This procedure enables to synthesize highly homogeneous and fine powders for functional materials. The double-chain based superconductor Pr2Ba4Cu7O15−δ and double perovskite photocatalytic semiconductor Ba2Tb(Bi,Sb)O6 were synthesized by using the citrate pyrolysis technique. For the present sample with a reduction treatment for 72 h, a sharp superconducting transition appeared at an onset temperature Tc,on=26 K accompanied by a zero-resistance st

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "2%Bleaching powder solution"

1

Yann, Theara, Charinee Winotapun, Phanny Yos, Lee Hwei Voon, and Orathai Boondamnoen. "Particle Characteristics of Diatomite Activated by Alkaline Solution." In 2024 8th International Conference on Materials Engineering and Nano Sciences & 2024 8th International Conference on Material Engineering and Manufacturing. Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-d4jwe2.

Full text

Abstract:

In this study, the activation of natural diatomite was done with alkaline solution. The diatomite powder was sieved and purified prior to activation at room temperature (Alk-DA RT) and 85 °C (Alk-DA 85 °C). The effect of activation time of Alk-DA 85 °C samples was observed for 1 h, 2 h and 5 h. At temperature interval from room temperature to 530 °C, the weight loss for all of Alk-DA are less than R-DA. The reduction of particle aggregation was found in Alk-DA at both RT and 85 °C as shown in SEM images, indicating the activation by NaOH that effectively breaks down the bulky structure. The fo

APA, Harvard, Vancouver, ISO, and other styles

2

Chen, Wei, Thomas Dobrowolski, Satya Ganti, Tim Haeberle, Aaron Avagliano, and Anjani Achanta. "Material Capabilities of Additively Manufactured Alloy UNS N07718 in an H2S-Containing Environment." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17938.

Full text

Abstract:

Abstract Additive manufacturing (AM), specifically Laser Powder Bed Fusion (LPBF), brings benefits to the Oil & Gas industry in the areas of better performance, inventory management, and cost reduction. However, selection of AM alloy UNS(1) N07718 (AM 718) face uncertain material capabilities for critical applications such as sour service, when compared to its wrought counterpart specified in API(2) 6ACRA (oilfield 718). This study reveals that AM 718 of modified solution treatment combined with standard API 6ACRA age hardening are capable of meeting the yield strength, tensile strength, e

APA, Harvard, Vancouver, ISO, and other styles

3

Chen, Wei, Thomas Dobrowolski, Paul Agosta, et al. "Developing Additively Manufactured Alloy UNS N07718 for Critical Oilfield Applications." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-19220.

Full text

Abstract:

Abstract Additively Manufactured (AM) Alloy UNS(1) N07718, specifically using Laser Powder Bed Fusion (LPBF), has been increasingly adopted for components in oilfield applications. However, there is uncertainty of the differences in properties between AM (interchangeable with LPBF herein) 718 and wrought oilfield API(2) 6ACRA 718 material used in sour or hydrogen-generating conditions. Recent literature has shown promising results in mechanical properties and sour performance for AM 718, but certain technology gaps persist. This paper shows results of mechanical and corrosion testing of AM 718

APA, Harvard, Vancouver, ISO, and other styles

4

Sugahara, Katsuo, and Yoshio Takizawa. "Development of a New Corrosion Resistant Ni-Cr-Mo-Ta Alloy with Improved Corrosion Resistance to Sulfur Dewpoint Corrosion." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96413.

Full text

Abstract:

Abstract A new corrosion resistant Ni-Cr-Mo-Ta alloy has been developed with improved corrosion resistance to sulfur dewpoint corrosion. The corrosion tests show that this alloy can be used for heat-exchangers to recover waste heat at low temperatures in fossil fuel-fired power plants. This new alloy, which is composed of 20% chromium, 20% molybdenum, 2% tantalum and balance nickel, shows excellent corrosion resistance to sulfur dewpoint corrosion. The general and localized corrosion resistance behavior of this new alloy has been tested in different candidate solutions such as sulfuric acid so

APA, Harvard, Vancouver, ISO, and other styles

5

Huang, Jin, Bruce Brown, Xiu Jiang, Brian Kinsella, and Srdjan Nesic. "Internal CO2 Corrosion of Mild Steel Pipelines under Inert Solid Deposits." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10379.

Full text

Abstract:

Under-deposit CO2 corrosion occurs when solids like sand, corrosion products, wax or a variety of other particles deposit on the bottom of pipelines, forming a bed or layer of solids1, 2. Under-deposit CO2 corrosion is different from “regular” CO2 corrosion as the aqueous solution beneath the solids is chemically and physically different from the “bulk” solution in the pipe. The presence of solids can also limit inhibitor access to the metal surface which can initiate severe localized corrosion3. Initial testing was directed towards defining and modeling the fundamental mild steel CO2 corrosio

APA, Harvard, Vancouver, ISO, and other styles

6

Cao, Liu, Dian Li, Sydney Fields, and Yufeng Zheng. "Microstructure Characterization of Additively Manufactured Alloy 718." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-19419.

Full text

Abstract:

Abstract Additive manufacturing (AM) provides a new approach to the design and manufacture of components from metal powder and provides unique advantages over traditional manufacturing. An industry joint project was recently conducted to investigate the performance of AM’d alloy 718 (UNS N077168) in sour conditions specified in NACE(1) MR0175/ISO(2)15156. The evident variation of properties and performance was noticed on three batches of AM 718 samples from different vendors, even though they were solution annealed and aged individually to meet the same specification of API(3) 6ACRA 150K grade

APA, Harvard, Vancouver, ISO, and other styles

7

Rabea, Moe A., and Herbert Wang. "Effects of Silicon Carbide in Corrosion of A36 Gas Shielded Flux Core Welding." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-21163.

Full text

Abstract:

Abstract Using Gas Shielded Flux Core welding, a butt joint can be analyzed for surface corrosion. The material used with both of these welding processes in this experiment is 1/4-inch A36 Hot Rolled Flat Bar, cut from a single piece, variations of the stock material are minimized. The material is chosen as it is one of the most prevalent material used in many industries that incorporate heavy steel usage. The flat bar measures 3-inch in width, 1/4-inch in thickness, and are cut into 2-inch test pieces. Two pieces form a single test subject, which are welded together. One set of the test piece

APA, Harvard, Vancouver, ISO, and other styles

8

Cesar, Ilene C. R., Marcela L. Redígolo, Priscila C. S. Liporoni, and Egberto Munin. "Comparison between the traditional and the laser bleaching treatment." In European Conference on Biomedical Optics. Optica Publishing Group, 2001. http://dx.doi.org/10.1364/ecbo.2001.4433_193.

Full text

Abstract:

Fifteen human embedded third molars were used in this in vitro study to evaluate the effects of two bleaching products associated or not with Argon laser application. The samples received a cervical-apical cut and were longitudinally cut into 4 parts resulting in 75 specimens. These parts were divided at random into 5 groups and submitted to the traditional power bleaching procedure for enamel. Group 1 was separated as a control group. Group 2 was exposed to 37 % carbamide peroxide bleaching solution and developed with an Argon laser application. The same solution was used in Group 3 but the b

APA, Harvard, Vancouver, ISO, and other styles

9

Rodrigues, F., A. P. Serro, and C. G. Figueiredo-Pina. "Study of the Impact of the Bleaching with 6 % H2O2 Solution on Teeth Wear." In BALTTRIB 2015. Aleksandras Stulginskis University, 2015. http://dx.doi.org/10.15544/balttrib.2015.30.

Full text

Abstract:

This study aims to evaluate the effect of a 6 % hydrogen peroxide (H 2 O 2 ) solution, activated with UV-light, in colour, wear, microhardness and roughness of enamel surface. Five teeth were cut, polished and exposed to black tea solution to confer them a dark color. The specimens were tested before and after bleaching using a spectrophotometer colour equipment, a nanotribometer, a micro durometer and a SEM. On comparing with untreated, the treated enamel surface showed an improvement of colour but a reduction of microhardness and an increase of roughness and wear. A 6 % hydrogen peroxide sol

APA, Harvard, Vancouver, ISO, and other styles

10

Branco, A., M. Polido, A. P. Serro, and C. G. Figueiredo-Pina. "STUDY OF THE EFFECT OF H2O2 USED IN WHITENING TREATMENTS ON HUMAN ENAMEL WEAR RESISTANCE." In BALTTRIB. Aleksandras Stulginskis University, 2017. http://dx.doi.org/10.15544/balttrib.2017.22.

Full text

Abstract:

Tooth whitening treatments are based on the application of bleaching agents on the teeth surface, which can impair teeth health, due to its effect on enamel properties. The present work has the purpose of studying the effect of pH of H2O2 solutions on wear resistance of teeth. Friction coefficient, enamel microhardness, morphology and topography were also evaluated to better understand the induced changes. Three pH values (2, 4 and 6) of H2O2 solution were tested. First, human molars and premolars were disinfected, polished, cut in four equal pieces and darkened in a black tea solution. After,

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "2%Bleaching powder solution"

1

ตัณฑะพานิชกุล, วิวัฒน์. การศึกษาผลกระทบของปริมาณน้ำในเซลลูโลสไนเตรตต่อคุณสมบัติของน้ำยาทาเล็บ ที่มีดินเหนียวเป็นสารปรับสภาพการไหล : รายงานวิจัยแบบสมบูรณ์. จุฬาลงกรณ์มหาวิทยาลัย, 2004. https://doi.org/10.58837/chula.res.2004.55.

Full text

Abstract:

Cellulose nitrate (CN) is a semi-synthetic polymer rendering outstanding film properties such as good transparency, and water resistance, thus finds its major utilization in coating industry. Raw CN has water and isopropyl alcohol by-product at maximum content of approximately 3 and 30 wt%, respectively. The tolerance water level in the CN powder for a potential application as nail polish is investigated in order to produce good film-forming properties. The effect of adding layered silicate clay particles as thixotropic agent in the nail enamel is also examined. The water content was varied at

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!