Relevant bibliographies by topics / 2024 alloy

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic '2024 alloy'

Author: Grafiati
Published: 4 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '2024 alloy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "2024 alloy"

1

Sheppard, T. "Extrusion of AA 2024 alloy." Materials Science and Technology 9, no. 5 (May 1993): 430–40. http://dx.doi.org/10.1179/mst.1993.9.5.430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Veljic, Darko, Bojan Medjo, Marko Rakin, Zoran Radosavljevic, and Nikola Bajic. "Analysis of the tool plunge in friction stir welding - comparison of aluminium alloys 2024 T3 and 2024 T351." Thermal Science 20, no. 1 (2016): 247–54. http://dx.doi.org/10.2298/tsci150313059v.

Full text
Abstract:
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding (FSW) of high-strength aluminium alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the material is done at different rotating speeds. A three-dimensional finite element (FE) model for thermomechanical simulation is developed. It is based on arbitrary Lagrangian-Eulerian formulation, and Johnson-Cook material law is used for modelling of material behaviour. From comparison of the numerical results for alloys 2024 T3 and 2024 T351, it can be seen that the former has more intensive heat generation from the plastic deformation, due to its higher strength. Friction heat generation is only slightly different for the two alloys. Therefore, temperatures in the working plate are higher in the alloy 2024 T3 for the same parameters of the plunge stage. Equivalent plastic strain is higher for 2024 T351 alloy, and the highest values are determined under the tool shoulder and around the tool pin. For the alloy 2024 T3, equivalent plastic strain is the highest in the influence zone of the tool pin.
APA, Harvard, Vancouver, ISO, and other styles
3

Kemp, R. M. J., R. N. Wilson, and P. J. Gregson. "A Comparison of the Corrosion Fatigue Properties of Plate Aluminium Alloys for Aerospace Applications." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 207, no. 2 (July 1993): 97–104. http://dx.doi.org/10.1243/pime_proc_1993_207_253_02.

Full text
Abstract:
A corrosive environment such as salt water can severely degrade the fatigue properties of aluminium alloys used in aerospace applications. The corrosion fatigue crack growth rate properties of two conventional alloys, that is Al-Zn-Mg-Cu-Zr alloy (7010-T7651) and Al-Cu-Mg alloy (2024–T351) have been compared with the more recently developed Al-Li-Cu-Mg alloy (8090-T8771). Increased growth rates were observed in salt water compared to air for 7010 and 8090 but not for 2024. Comparing the three alloys, the 8090 alloy corrosion fatigue rates were similar to those of 2024 which were considerably less than those for 7010. The increase in crack growth in 8090 due to environment was associated with a decrease in the high level of crack closure observed for tests in air. The susceptibility of an alloy to corrosion fatigue can be summarized using a ‘corrosion fatigue resistance’ index, Rcf
APA, Harvard, Vancouver, ISO, and other styles
4

Mrówka-Nowotnik, Grazyna, and Jan Sieniawski. "Analysis of Intermetallic Phases in 2024 Aluminium Alloy." Solid State Phenomena 197 (February 2013): 238–43. http://dx.doi.org/10.4028/www.scientific.net/ssp.197.238.

Full text
Abstract:
The main objective of this study was to analyze the evolution of the microstructure (morphology, composition and distribution of intermetallic phases) in the 2024 aluminium alloy cooled with different cooling rates after solidification process. A few techniques: optical light microscopy (LM), scanning (SEM) electron microscopy combined with an energy dispersive X-ray microanalysis (EDS), X-ray diffraction (XRD) were used to identify intermetallics in the examined alloy. The results show that the microstructure of 2024 aluminum alloys in as-cast condition consisted following intermetallic phases: Al2Cu, Al2CuMg, Al7Cu2Fe, Al4Cu2Mg8Si7, AlCuFeMnSi and Mg2Si.
APA, Harvard, Vancouver, ISO, and other styles
5

Zhu, Cheng, Zhihao Zhao, Gaosong Wang, Qingfeng Zhu, and Shiliang Wang. "Effect of 2024 Al Alloy Insert on the Grain Refinement of a 2024 Al Alloy Prepared via Insert Mold Casting." Metals 9, no. 10 (October 21, 2019): 1126. http://dx.doi.org/10.3390/met9101126.

Full text
Abstract:
In this study, an insert mold casting was fabricated by inserting 2024 Al extruded rods into a 2024 Al melt. The molds were kept at a 2024 Al melt for different times. The 2024 Al extruded rods were used to refine the 2024 Al alloy grains because the advantage of this method is that it is contamination free compared with other grain refiners. Moreover, we investigated the macro and microstructure of the ingots. Further, we analyzed the refinement mechanism of the 2024 Al rod on the 2024 Al alloy. Our result showed that when the immersion time of the 2024 Al insert was 0 s, a metallurgical bonding was partly formed between the 2024 Al insert and the 2024 Al alloy mold cast. When the immersion time of the 2024 Al insert increased to 5 s, the 2024 solid insert was dissolved in the liquid; the coarse dendritic grains were replaced by fine equiaxed grains. The refinement mechanism for the insertion of a 2024 Al rod on the 2024 Al alloy was to melt the 2024 Al insert and have it decrease the degree of the liquid superheat, which thus increased the cooling rate and provided a large number of small particles that acted as the nucleus of heterogeneous nucleation. However, these particles were melted gradually in the high-temperature liquid after an increase of immersion time. Thus, the refinement effect of 2024 Al insert on the solidified structure was weakened.
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, Seon Ho, Kyu Sik Kim, Shae K. Kim, Young Ok Yoon, Kyu Sang Cho, and Kee Ahn Lee. "Microstructure and Mechanical Properties of Eco-2024-T3 Aluminum Alloy." Advanced Materials Research 602-604 (December 2012): 623–26. http://dx.doi.org/10.4028/www.scientific.net/amr.602-604.623.

Full text
Abstract:
In this study, the microstructures and mechanical properties of the recently developed Eco-2024-T3 alloy were examined. Eco-2024 is made using Eco-Mg (Mg-Al2Ca) in place of element Mg during the manufacture of alloy 2024-T3. This is an alloy that has economic advantage and excellent properties. Alloy Eco-2024 showed smaller crystal grains that were distributed more evenly compared to the existing alloy 2024-T3. It consisted of Al matrices containing minute amounts of Al2CuMg, Al2Cu, and Ca phases and showed microstructures with reduced amounts of Fe phases or oxide. As a result of tensile tests, this alloy exhibited yield strength of 413 MPa, tensile strength of 527 MPa, and elongation of 15.4%. In other words, it showed higher strength than the existing alloy 2024 but was similar to the existing alloy 2024 in terms of elongation. In fatigue tests, alloy Eco-2024-T3 recorded fatigue limit of 330 MPa or around 80% of its yield strength; this is a much more excellent property compared to the existing alloy 2024-T3, which has fatigue limit of 250 MPa. Based on the aforementioned results, the correlation between the excellent mechanical properties of alloy Eco-2024-T3 and its microstructure was examined.
APA, Harvard, Vancouver, ISO, and other styles
7

Khunbanterng, Nisachon, Sirikul Wisutmethangoon, Thawatchai Plookphol, and Jessada Wannasin. "Effect of Sr Addition on Microstructure and Mechanical Properties of Semi-Solid 2024 Al Alloys." Applied Mechanics and Materials 496-500 (January 2014): 336–39. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.336.

Full text
Abstract:
Semi-solid 2024 Al alloys with strontium (Sr) addition of 0.15 wt% and 0.3 wt% were prepared by Gas Induced Semi-Solid (GISS) process. Effect of Sr addition on the microstructure and mechanical properties of the semi-solid 2024 alloy was investigated. It was found that the tensile strength and % elongation of the T6 heat treated alloy with the Sr addition were higher than those without Sr addition owing to the reduction of Mg2Si phase formation. The semi-solid 2024 Al alloy with 0.15%Sr addition obtained the average highest tensile strength of 382 MPa and elongation of 6.45%.
APA, Harvard, Vancouver, ISO, and other styles
8

Anghelina, Florina Violeta, Vasile Bratu, Elena Valentina Stoian, and Ileana Nicoleta Popescu. "Microstructural Investigation of Aluminum Alloys Type "2024" for the Aviation Industry." Advanced Materials Research 1114 (July 2015): 62–67. http://dx.doi.org/10.4028/www.scientific.net/amr.1114.62.

Full text
Abstract:
This paper presents experimental results revealed on the samples type 2024 aluminum alloy used in aeronautics. The results of microstructural and compositional investigations presented in this paper were performed on samples taken from 2024 Al alloy samples produced by ALRO Slatina. The main objective of the investigation is the conformity assessment of alloys in terms of chemical composition with the specifications type of aviation [SAE AMS 47N, EN 515, etc]. It also aims microstructural conformity assessment in terms of the grain and the hardening effects by natural or artificial aging applied by the manufacturer. Adequate characterization of 2024 aluminum alloys type was achieved by combined investigations: (i) Wet Chemical Analysis, (ii) Spectrochemical Analysis and (iii) Electron Microscopy. The main conclusion that emerges from the investigations carried out on aluminum samples revealed that: (a) alloys fits in terms of composition with the standard specification for 2024, in all cases; (b) microstructure vary in fineness of grain, but meets the requirements of aviation rules; the investigated microstructures have been appreciated as adequate of aluminum alloys type "2024".
APA, Harvard, Vancouver, ISO, and other styles
9

Kyogoku, Hideki, Kohei Yamamoto, Toshi Taka Ikeshoji, Kazuya Nakamura, and Makiko Yonehara. "Melting and Solidification Behavior of High-Strength Aluminum Alloy during Selective Laser Melting." Materials Science Forum 941 (December 2018): 1300–1305. http://dx.doi.org/10.4028/www.scientific.net/msf.941.1300.

Full text
Abstract:
Additive manufacturing (AM) technology has been dramatically attracted attention because of advantages in building free-shaped parts and simplification of manufacturing process. Recently the most relevant alloys, such as TiAl6V4, Inconel 718, AlSi10Mg and so on, are able to manufacture the parts using metal AM technology. However high-strength 2024, 6061 and 7075 aluminum alloys are difficult to fabricate using selective laser melting (SLM) owing to solidification cracking during solidification. In this research, the melting and solidification behaviors of AlSi10Mg alloy during SLM process were observed under various fabrication conditions of laser power and scan speed using a high-speed camera. It was found that the melting and solidification behavior of the alloy is greatly different by the fabrication conditions. And also the mechanism of solidification cracking in 2024 and 6061 aluminum alloys is investigated by the observation of the surface morphology and microstructure of the alloys using OM, SEM and EDS, comparing with Al10SiMg alloy. As a result, crack-free 2024 and 6061 aluminum alloy parts can be obtained by fabrication at the higer enrgy density.
APA, Harvard, Vancouver, ISO, and other styles
10

Hughes, A. E., R. J. Taylor, and B. R. W. Hinton. "Chromate Conversion Coatings on 2024 Al Alloy." Surface and Interface Analysis 25, no. 4 (April 1997): 223–34. http://dx.doi.org/10.1002/(sici)1096-9918(199704)25:4<223::aid-sia225>3.0.co;2-d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "2024 alloy"

1

Subramaniyan, Jaya. "Extrusion of 2024 aluminium alloy sections." Thesis, Imperial College London, 1989. http://hdl.handle.net/10044/1/47677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Akhtar, Anisa Shera. "Surface science studies of conversion coatings on 2024-T3 aluminum alloy." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/1713.

Full text
Abstract:
The research in this thesis aims to develop new mechanistic knowledge for coating processes at 2024-Al alloy surfaces, ultimately to aid the design of new protective coatings. Coatings formed by phosphating, chromating, and permanganating were characterized especially by scanning Auger microscopy (SAM), X-ray photoelectron spectroscopy, and scanning electron microscopy . The objective was to learn about growth (nm level) as a function of time for different coating baths, as well as a function of lateral position across the different surface microstructural regions, specifically on the μm-sized Al-Cu-Mg and Al-Cu-Fe-Mn particles which are embedded in the alloy matrix . The research characterizes coating thickness, composition, and morphology. The thesis emphasizes learning about the effect of different additives in zinc phosphating baths . It was found that the Ni²⁺ additive has two main roles : first, the rate of increase in local solution pH is limited by the slower kinetics of reactions involving Ni²⁺ compared to Zn²⁺, leading to thinner zinc phosphate (ZPO) coatings when Ni²⁺ is present. Second, most Ni²⁺ deposition occurs during the later stages of the coating process in the form of nickel phosphate and a Ni-Al oxide in the coating pores on the alloy surface, increasing the corrosion resistance. Aluminum fluoride precipitates first during the initial stages of the coating process, followed by aluminum phosphate, zinc oxide, and finally ZPO. When Ni²⁺ is present in the coating solution at 2000 ppm, ZnO predominates in the coating above the A-Cu-Fe-Mn particle while ZPO dominates on the rest of the surface. The Mn²⁺ additive gives a more even coating distribution (compared with Ni²⁺) across the whole surface. The Mn²⁺ -containing ZPO coating is similar to the chromate coating in terms of evenness, while there is more coating deposition at the second-phase particles for permanganate coatings. The oxides on the Al-Cu-Fe-Mn and matrix regions are similar before coating, thereby confirming that a variety of observed differences in ZPO coating characteristics at these regions arise from the different electrochemical characteristics of the underlying metals. Upon exposure to a corrosive solution, the ZPO coating provides more protection to the second-phase particles compared to the matrix.
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Xi. "Corrosion Protection of Aluminum Alloy 2024-T3 by Al-Rich Primer." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1557143060015145.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ganguly, Supriyo. "Non-destructive measurement of residual stresses in welded aluminium 2024 airframe alloy." Thesis, n.p, 2004. http://ethos.bl.uk/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cai, Hong. "Microbiologically influenced corrosion and titanate conversion coatings on aluminum alloy 2024-T3 /." View online ; access limited to URI, 2006. http://0-wwwlib.umi.com.helin.uri.edu/dissertations/dlnow/3225314.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gujarathi, Kedar Kanayalal. "Corrosion of aluminum alloy 2024 belonging to the 1930s in seawater environment." [College Station, Tex. : Texas A&M University, 2008. http://hdl.handle.net/1969.1/ETD-TAMU-3002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gordon, Matthew. "A Nacreous Self-Assembled Nanolaminate for Corrosion Resistance on 2024-Al Alloy." Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/33548.

Full text
Abstract:
Nanometer thick layers of clay and polymer were formed on mica, silicon, and aluminum 2024-T3 alloy using alternating solutions of positively and negatively charged polymer and clay, respectively. Atomic force microscopy was used to observe the morphology of the composite films on mica and silicon. It was found that solution concentrations of clay above 0.02 weight percent lead to the uncontrolled deposition of clay platelets on the substrateâ s surface. By using solution concentrations of clay above 0.02 weight percent and ultrasonic agitation together it is possible to deposit a uniform monolayer of clay platelets on a mica substrate in £ 20 seconds. Ultrasonic agitation also produced crude patterns of montmorillonite platelets. Thin films of poly(diallydimethylammonium chloride) (PDDA) were made using concentrations ³ 2 weight percent of PDDA. It was found that the PDDA formed several unusual morphologies. Spherulites of PDDA were observed with AFM and the glass transition temperature of high molecular weight PDDA was measured using differential scanning calorimetry (DSC). Circular regions of positive charge were discovered on silicon wafers provided by three different sources. These areas of charge have never been reported in literature, but can easily be detected by placing wafers into solutions containing negatively or positively charged solutions of clay or polymer, respectively. The exact nature of these charged regions is unknown, but it is hypothesized that impurities on silicon wafers create the circular regions of positive charge. ISAM films made of a polyamide salt and a synthetic clay, Laponite RD®, demonstrated significant corrosion resistance on 2024-T3 Al alloys after 168 hours of salt spray testing. The ISAM films offered corrosion protection only if there was a significant layer of underlying surface oxide present, however. It was found that ISAM deposited films of polyarylic acid (PAA) and polyallylamine hydrochloride (PAH) may offer some corrosion resistance on 2024-T3 Al alloys, but these filmsâ corrosion resistance is severely hampered by the presence of Cl- in the PAH solution. Funding from this project was gratefully received from the Materials Science and Engineering Department at Virginia Tech; Luna Innovations Inc; the American Chemical Society / Petroleum Research Fund #34412-G5 and the Environmental Protection Agency Contract #68-D-00-244.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
8

GUO, YANG. "A Study of Trivalent Chrome Process Coatings on Aluminum Alloy 2024-T3." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1308166499.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Patel, Rishikumar M. "Investigating the Mechanical Behavior of Conventionally Processed High Strength Aluminum Alloy 2024." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1523106869575194.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Efthymiadis, Panos. "Multiscale experimentation & modeling of fatigue crack development in aluminium alloy 2024." Thesis, University of Sheffield, 2015. http://etheses.whiterose.ac.uk/7735/.

Full text
Abstract:
The objective of this research project is to be able to understand the role of various microstructural features on Fatigue Crack Initiation (FCI) of metallic alloys. By employing a novel experimental set-up, mechanical testing was performed in situ within an SEM chamber, and the deformation of the individual grains was observed real time. A physically-based Crystal Plasticity (CP) model was then developed that accurately predicts the macro and micro mechanical behaviour for Al2024 T3. An experimentally informed FCI criterion was developed that accounts for the effect of local slip bands and the applied local strains. While ‘precious’ insights were given on the small crack growth regime observing the occurring microscale phenomena. FCI is a multiscale process and thus evaluating the microscale does not cover fully the understanding of local deformation and damage. Thus a multiscale DIC process was employed to better understand the macro and mesoscale as well. 3D Digital Image Correlation (DIC) was employed and the strain distributions (at the sample scale) were obtained for various loading conditions. High magnification camera based 2D DIC was then used and the strain measurements were also extracted at clusters of grains. Useful observations were given for the different strain components (εxx, εyy, εxy). Finally the total fatigue lifetime of the component was compared to the modeled FCI for various loading conditions.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "2024 alloy"

1

Beaver, P. W. Experimental and theoretical determination of J(IC) for 2024-T351 aluminium alloy. Melbourne, Australia: Aeronautical Research Laboratories, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kim, Young-Won, Wilfried Smarsly, Junpin Lin, Dennis Dimiduk, and Fritz Appel, eds. Gamma Titanium Aluminide Alloys 2014. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118998489.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

International Conference on Shape Memory and Superelastic Technologies (2004 Baden-Baden, Germany). SMST-2004: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, October 3-7, 2004, Kurhaus Baden-Baden, Baden-Baden, Germany. Edited by Mertmann Matthias. Materials Park, OH: ASM International, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

International Symposium on Superalloys (10th 2004 Seven Springs, Pa.). Superalloys 2004: Proceedings of the Tenth International Symposium on Superalloys : held September 19-23, 2004, Seven Springs Mountain resort in Champion, Pennsylvania. Warrendale, Pa: TMS, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Parliament, Scotland. Stirling-Alloa-Kincardine Railway and Linked Improvements (Scotland) Act 2004. Edinburgh: Stationery Office, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Magnesium, Technology Symposium (5th 2004 Charlotte N. C. ). Magnesium technology 2004: Proceedings of the symposium held during the 2004 TMS Annual Meeting in Charlotte, North Carolina, U.S.A., March 14-18, 2004. Warrendale, Pa: TMS, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Oman) International Conference on the Semi-Solid Processing of Alloys and Composites (13th 2014 Muscat. Semi-solid processing of alloys and composites XIII: Selected, peer reviewed papers from the 13th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2014), September 15-17, 2014, Muscat, Sultanate of Oman. Pfaffikon, Switzerland: Trans Tech Publications Ltd., 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

International, Conference on Zinc and Zinc Alloy Coated Steel Sheet (6th 2004 Chicago IL U. S. A. ). 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet: GALVATECH '04, April 4-7, 2004. Warrendale, PA: Association for Iron & Steel Technology, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kolkman, H. J. Microstructural and fractographic analysis of fatigue crack propagation in 2024-T351 and 2324-T39. Amsterdam: National Aerospace Laboratory, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

K, Kokula Krishna Hari, ed. Investigations of Analysis and Fabrication of butt joint using friction stir welding of A319 Aluminum Alloy: ICIEMS 2014. India: Association of Scientists, Developers and Faculties, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "2024 alloy"

1

Siddiqui, R. A. "Ageing Characteristics of 2024 Aluminium Alloy." In Proceedings of the Twenty-Ninth International Matador Conference, 381–87. London: Macmillan Education UK, 1992. http://dx.doi.org/10.1007/978-1-349-12433-6_49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

McEvily, A. J., Masahiro Endo, S. Cho, J. Kasivitamnuay, and Hisao Matsunaga. "Fatigue Striations and Fissures in 2024-T3 Aluminum Alloy." In Materials Science Forum, 397–400. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-469-3.397.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cheneke, Semegn, and D. Benny Karunakar. "Some Studies on 2024 Rheocast Alloy Through Taguchi Optimization Method." In Lecture Notes on Multidisciplinary Industrial Engineering, 257–76. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4550-4_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tolley, Alfredo, Rafael Ferragut, and Alberto Somoza. "Study of the Nanostructures Formed in 2024 Alloy during Thermomechanical Treatments." In Materials Science Forum, 489–94. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-408-1.489.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Xu, X. J., Seock Sam Kim, and Y. S. Zheng. "Improvement in Strength of 2024 Al Alloy by Enhanced Solution Treatment." In Key Engineering Materials, 2362–67. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.2362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Özdeş, Hüseyin, İlker Erdeniz, Eray Erzi, and Derya Dişpinar. "Near-Net-Shape Processing of 2024 Aluminium Alloy by SIMA Method." In Shape Casting: 5th International Symposium 2014, 233–40. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48130-2_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Özdeş, Hüseyin, İlker Erdeni̇z, Eray Erzi, and Derya Dişpinar. "Near-Net-Shape Processing of 2024 Aluminium Alloy by Sima Method." In Shape Casting: 5th International Symposium 2014, 233–40. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118888100.ch29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Milcic, Miodrag, Tomaz Vuherer, Igor Radisavljevic, and Dragan Milcic. "Experimental Investigation of Mechanical Properties on Friction Stir Welded Aluminum 2024 Alloy." In Experimental and Numerical Investigations in Materials Science and Engineering, 44–58. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99620-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dorward, R. C., and D. J. Beerntsen. "Effects of Casting Practice on Macrosegregation and Microstructure of 2024 Alloy Billet." In Essential Readings in Light Metals, 825–30. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118647783.ch103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dorward, R. C., and D. J. Beerntsen. "Effects of Casting Practice on Macrosegregation and Microstructure of 2024 Alloy Billet." In Essential Readings in Light Metals, 825–30. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48228-6_103.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "2024 alloy"

1

Riveiro, A., J. Pou, F. Lusquiños, M. Boutinguiza, F. Quintero, R. Soto, R. Comesaña, and M. Pérez-Amor. "Laser cutting of 2024-T3 aeronautic aluminium alloy." In ICALEO® 2006: 25th International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2006. http://dx.doi.org/10.2351/1.5060829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nair, R. Madhavan, B. Durairajan, and B. Bahr. "High Speed Drilling of Al-2024-T3 Alloy." In General Aviation Technology Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2002. http://dx.doi.org/10.4271/2002-01-1516.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ramos, J. A., J. Magee, K. Watkins, W. M. Steen, and F. Noble. "Microstructure of laser bent aluminium alloy Alclad 2024-T3." In ICALEO® ‘98: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1998. http://dx.doi.org/10.2351/1.5059146.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Panagopoulos, Christos N., K. G. Georgarakis, Alexis Carabelas, and Alexandra Manousaki. "Surface modifications of 2024 Al alloy by laser treatment." In Medical Imaging 2003 Physiology and Function: Methods, Systems, and Applications, edited by Alexis Carabelas, Giuseppe Baldacchini, Paolo Di Lazzaro, and Dimitrios Zevgolis. SPIE, 2003. http://dx.doi.org/10.1117/12.513594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Xiaoqiang, Honghan Yu, Guiqiang Guo, and Dongsheng Li. "Single-point incremental forming of 2024-T3 aluminum alloy sheets." In NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers. AIP, 2013. http://dx.doi.org/10.1063/1.4850103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Parkhill, Robert L., and Edward T. Knobbe. "Surface texturing of aluminum alloy 2024 via excimer laser irradiation." In Photonics West '97, edited by Harry Shields and Peter E. Dyer. SPIE, 1997. http://dx.doi.org/10.1117/12.270085.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Alfieri, Vittorio, Fabrizia Caiazzo, and Vincenzo Sergi. "Dissimilar joining of titanium alloy Ti-6Al-4V to aluminum alloy 2024 via laser welding." In ICALEO® 2013: 32nd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2013. http://dx.doi.org/10.2351/1.5062926.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Hao, Yihui Huang, Zhenying Du, Wenwu Zhang, and Mengxue Bi. "Effect of Laser Shock Peening on Electrochemical Corrosion Resistance of 2024 Aluminum Alloy." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8549.

Full text
Abstract:
Laser shock peening is an innovation technique due to its significant improvement on the corrosion resistance of metallic materials. The study describes the effect of laser shock peening with multiple LSP impacts on the corrosion resistance of 2024 aluminum alloy in NaCl water solution with a mass fraction of 3.5% by using electrochemical technique. The experimental results reveal that LSP significantly reduces the corrosion rate of 2024 aluminum alloy, and as the number of impacts increases the corrosion rate decreases. The study demonstrates that LSP is an effective method to improve the electrochemical corrosion resistance of 2024 aluminum alloy.
APA, Harvard, Vancouver, ISO, and other styles
9

Caiazzo, Fabrizia, Vittorio Alfieri, Francesco Cardaropoli, Gaetano Corrado, and Vincenzo Sergi. "Characterization of disk-laser dissimilar welding of titanium alloy Ti-6Al-4V to aluminum alloy 2024." In SPIE LASE, edited by Friedhelm Dorsch. SPIE, 2013. http://dx.doi.org/10.1117/12.2004681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Xudong, Rongshi Xiao, and Kai Chen. "Study on welding of 2024 aluminum alloy sheet with disc laser." In ICALEO® 2009: 28th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2009. http://dx.doi.org/10.2351/1.5061550.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "2024 alloy"

1

Wang, Le-Min, and Chih-Jrn Tsai. Creep Resistance of 2024 Aluminum Alloy. Warrendale, PA: SAE International, October 2013. http://dx.doi.org/10.4271/2013-32-9110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kariya, Harumichi, and Bonnie Antoun. Effect of High Temperature CO2 on Haynes 230 Alloy (Updated Jan 2021). Office of Scientific and Technical Information (OSTI), January 2021. http://dx.doi.org/10.2172/1763860.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Frazier, W. E., and J. Waldman. Thermal Mechanical Processing of Al-Li Alloy 2020 To Achieve Fine Grain Size. Fort Belvoir, VA: Defense Technical Information Center, October 1987. http://dx.doi.org/10.21236/ada199249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Yanli. Report on FY 2020 testing of Alloy 709 in support of EPP analysis. Office of Scientific and Technical Information (OSTI), October 2020. http://dx.doi.org/10.2172/1761623.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Koch, Gerhardus H., Elise L. Hagerdorn, and Alan P. Berens. Effect of Preexisting Corrosion on Fatigue Cracking of Aluminum Alloys 2024-T3 and 7075-T6. Fort Belvoir, VA: Defense Technical Information Center, August 1995. http://dx.doi.org/10.21236/ada430616.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yu, Lingyu, and Kumar V. Jata. Review and Study of Physics Driven Pitting Corrosion Modeling in 2024-T3 Aluminum Alloys (Postprint). Fort Belvoir, VA: Defense Technical Information Center, May 2015. http://dx.doi.org/10.21236/ada624864.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Feng, Zhili, Tao Dai, Doug Kyle, Yanli Wang, and Yiyu Wang. Report on FY 2020 Welding Parameters Optimization and the Fabrication of Qualified Alloy 709 Welds. Office of Scientific and Technical Information (OSTI), September 2020. http://dx.doi.org/10.2172/1820854.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Krentz, Timothy. 2020 Report - SRNL Aging and Lifetimes program tritium aging studies on structural alloys. Office of Scientific and Technical Information (OSTI), January 2021. http://dx.doi.org/10.2172/1764824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Yanli, Peijun Hou, and Sam Sham. Report on FY 2020 creep, fatigue and creep fatigue testing of Alloy 709 base metal at ORNL. Office of Scientific and Technical Information (OSTI), September 2020. http://dx.doi.org/10.2172/1671410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Yanli, Peijun Hou, and T. Sham. Report on FY 2021 creep, fatigue and creep fatigue testing of Alloy 709 base metal at ORNL. Office of Scientific and Technical Information (OSTI), August 2021. http://dx.doi.org/10.2172/1813151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic '2024 alloy' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography