Log in

Relevant bibliographies by topics / 3D modeliai / Journal articles

To see the other types of publications on this topic, follow the link: 3D modeliai.

Journal articles on the topic '3D modeliai'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic '3D modeliai.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Statkus, Tautvydas. "MODELING OF THE JACKED PILE STATIC LOAD TEST WITH PLAXIS 3D / SPAUSTINIO POLIO BANDYMO STATINE APKROVA MODELIAVIMAS PLAXIS 3D." Mokslas – Lietuvos ateitis 8, no. 5 (2016): 495–98. http://dx.doi.org/10.3846/mla.2016.973.

Full text

Abstract:

In this article jacked pile installation technology and its current processes, altering the base physical and mechanical characteristics are discussed. For the jacked pile static load test simulation Plax 3D software was selected, the opportunities and developments were described. Model building, materials, models, model geometry, finite elements, boundary conditions and assumptions adopted in addressing problems described in detail. Three different tasks formulated and load-settlement dependence a comparison of the results with the experiment given. Conclusions are formulated according to the

APA, Harvard, Vancouver, ISO, and other styles

2

Savičienė, Laura. "Žmogaus ir kompiuterio sąsajos projektavimas skrydžių valdymo sprendimų priėmimo sistemai*." Informacijos mokslai 50 (January 1, 2009): 181–86. http://dx.doi.org/10.15388/im.2009.0.3241.

Full text

Abstract:

Vis daugėjant skrydžių ir atsirandant naujoms oro erdvės valdymo iniciatyvoms ypač svarbu tobulinti skrydžių valdymo sistemas. Jose labai reikšmingas žmogiškasis veiksnys, taigi ir tai, kokiu būdu sistema pateikia žmogui informaciją. Straipsnyje apžvelgiami naujausi informacijos vaizdavimo skrydžių valdymo sistemose tyrimai. Esamų 2D vaizdavimo būdų jau nebeužtenka, o 3D vaizdavimas taip pat turi trūkumų. Todėl tikslinga integruoti 2D ir 3D vaizdus. Straipsnyje pateikiami eskiziniai sprendimai, priimti projektuojant sprendimų priėmimo sistemos sąsają. Naujumas yra žinių apie lėktuvų tūpimo ir

APA, Harvard, Vancouver, ISO, and other styles

3

Kim, Minkwan, and Joo Hyoung Lee. "STUDY ON NONLINEAR PAVEMENT RESPONSES OF LOW VOLUME ROADWAYS SUBJECT TO MULTIPLE WHEEL LOADS / NETIESINĖS KELIO DANGOS PRIKLAUSOMYBĖS NUO MAŽO INTENSYVUMO KELIŲ, VEIKIAMŲ DAUGKARTINĖMIS RATŲ APKROVOMIS, TYRIMAS." Journal of Civil Engineering and Management 17, no. 1 (2011): 45–54. http://dx.doi.org/10.3846/13923730.2011.554012.

Full text

Abstract:

This paper describes numerical analyses on low volume roads (LVRs) using a nonlinear three-dimensional (3D) finite element model (FEM). Various pavement scenarios are analyzed to investigate the effects of pavement layer thicknesses, traffic loads, and material properties on pavement responses, such as surface deflection and subgrade strain. Each scenario incorporates a different combination of wheel/axle configurations and pavement geomaterial properties to analyze the nonlinear behavior of thinly surfaced asphalt pavement. In this numerical study, nonlinear stress-dependent models are employ

APA, Harvard, Vancouver, ISO, and other styles

4

Chieh Chang, Wei, and Wei Min Jeng. "Streamlined Workflow for 3D Modeling with Animated Characters." Journal of Software 10, no. 7 (2015): 912–18. http://dx.doi.org/10.17706//jsw.10.7.912-918.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hong. "3D Indoor Modeling Based on Terrestrial Laser Scanning." Journal of the Korean Society of Civil Engineers 35, no. 2 (2015): 525. http://dx.doi.org/10.12652/ksce.2015.35.2.0525.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jang, Yong-Suk, Boo-Gyoun Kim, Seong-Won Cho, and Sun-Tae Chung. "3D Face Modeling based on 3D Morphable Shape Model." Journal of the Korea Contents Association 8, no. 1 (2008): 212–27. http://dx.doi.org/10.5392/jkca.2008.8.1.212.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Popkonstantinovic, Branislav, Misa Stojicevic, Zorana Jeli, Milos Obradovic, and Popa Dragos-Laurentiu. "Simulation and motion study of mechanical integrator 3D model." FME Transactions 47, no. 2 (2019): 299–303. http://dx.doi.org/10.5937/fmet1902299p.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hajji, Rafika, and Roland Billen. "Collaborative 3D Modeling." International Journal of 3-D Information Modeling 5, no. 3 (2016): 47–67. http://dx.doi.org/10.4018/ij3dim.2016070104.

Full text

Abstract:

The need of 3D city models increases day by day. However, 3D modeling still faces some impediments to be generalized. Therefore, new solutions such as collaboration should be investigated. The paper presents a new vision of collaboration applied on 3D modeling through the definition of the concept of a 3D collaborative model. The paper highlights basic questions to be considered for the definition and the development of that model then argues the importance of reuse of 2D data as a promising solution to reconstruct 3D data and to upgrade to integrated 3D solutions in the future. This idea is s

APA, Harvard, Vancouver, ISO, and other styles

9

Song, Eungyeol, Wan-Ki Koh, and Sunjin Yu. "Single Image-Based 3D Face Modeling for 3D Printing." Journal of the Korean Society of Radiology 10, no. 8 (2016): 571–76. http://dx.doi.org/10.7742/jksr.2016.10.8.571.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Sergeyeva, O. Yu. "Additive technologies and 3d modeling." Nanotechnologies in Construction: A Scientific Internet-Journal 10, no. 4 (2018): 142–58. http://dx.doi.org/10.15828/2075-8545-2018-10-4-142-158.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Kim, Sang-Hoon. "Realistic individual 3D face modeling." Journal of the Korea institute of electronic communication sciences 8, no. 8 (2013): 1187–93. http://dx.doi.org/10.13067/jkiecs.2013.8.8.1187.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Oh, Seol Young, and Dongae Suh. "Producing the insoles for flat feet of senior men using 3D systems based on 3D scanning, 3D modeling, and 3D printing." Research Journal of the Costume Culture 25, no. 3 (2017): 270–84. http://dx.doi.org/10.7741/rjcc.2017.25.3.270.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Han, Jung-Soo. "Construction Design 3D Modeling in Smart Phone." Journal of Digital Policy and Management 11, no. 12 (2013): 333–38. http://dx.doi.org/10.14400/jdpm.2013.11.12.333.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Benzer, Ali Ihsan, and Bunyamin Yildiz. "THE EFFECT OF COMPUTER-AIDED 3D MODELING ACTIVITIES ON PRE-SERVICE TEACHERS’ SPATIAL ABILITIES AND ATTITUDES TOWARDS 3D MODELING." Journal of Baltic Science Education 18, no. 3 (2019): 335–48. http://dx.doi.org/10.33225/jbse/19.18.335.

Full text

Abstract:

The computer-aided 3D modelling which is one of the innovative technologies can offer great opportunities to improve students' skills. The aim of this research was to examine the effects of computer-aided 3D modeling activities on pre-service teachers’ spatial abilities and attitudes towards 3D modeling and the relevant course. The study group of the research was composed of 55 pre-service IT teachers at a state university in Turkey. The research was carried out in quasi-experimental design based on pre-post test model. The experimental research was carried out with the experimental group for

APA, Harvard, Vancouver, ISO, and other styles

15

Somogyi, A., A. Barsi, B. Molnar, and T. Lovas. "CROWDSOURCING BASED 3D MODELING." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B5 (June 15, 2016): 587–90. http://dx.doi.org/10.5194/isprsarchives-xli-b5-587-2016.

Full text

Abstract:

Web-based photo albums that support organizing and viewing the users’ images are widely used. These services provide a convenient solution for storing, editing and sharing images. In many cases, the users attach geotags to the images in order to enable using them e.g. in location based applications on social networks. &lt;br&gt;&lt;br&gt; Our paper discusses a procedure that collects open access images from a site frequently visited by tourists. Geotagged pictures showing the image of a sight or tourist attraction are selected and processed in photogrammetric processing softwar

APA, Harvard, Vancouver, ISO, and other styles

16

Somogyi, A., A. Barsi, B. Molnar, and T. Lovas. "CROWDSOURCING BASED 3D MODELING." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B5 (June 15, 2016): 587–90. http://dx.doi.org/10.5194/isprs-archives-xli-b5-587-2016.

Full text

Abstract:

Web-based photo albums that support organizing and viewing the users’ images are widely used. These services provide a convenient solution for storing, editing and sharing images. In many cases, the users attach geotags to the images in order to enable using them e.g. in location based applications on social networks. <br><br> Our paper discusses a procedure that collects open access images from a site frequently visited by tourists. Geotagged pictures showing the image of a sight or tourist attraction are selected and processed in photogrammetric processing software that produces

APA, Harvard, Vancouver, ISO, and other styles

17

Pyataev, A. S. "3D TREE MODELING ALGORITHM." Siberian Journal of Science and Technology 19, no. 4 (2018): 598–604. http://dx.doi.org/10.31772/2587-6066-2018-19-4-598-604.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Rivers, Alec, Frédo Durand, and Takeo Igarashi. "3D modeling with silhouettes." ACM Transactions on Graphics 29, no. 4 (2010): 1–8. http://dx.doi.org/10.1145/1778765.1778846.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Andrews, James, Hailin Jin, and Carlo Séquin. "Interactive Inverse 3D Modeling." Computer-Aided Design and Applications 9, no. 6 (2012): 881–900. http://dx.doi.org/10.3722/cadaps.2012.881-900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Fontijne, D., and L. Dorst. "Modeling 3D euclidean geometry." IEEE Computer Graphics and Applications 23, no. 2 (2003): 68–78. http://dx.doi.org/10.1109/mcg.2003.1185582.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Wang, S. W., and A. E. Kaufman. "Volume-sampled 3D modeling." IEEE Computer Graphics and Applications 14, no. 5 (1994): 26–32. http://dx.doi.org/10.1109/38.310721.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Duflos, E., P. Penel, and P. Vanheeghe. "3D guidance law modeling." IEEE Transactions on Aerospace and Electronic Systems 35, no. 1 (1999): 72–83. http://dx.doi.org/10.1109/7.745681.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Kil, Yong Joo, Pietro Renzulli, Oliver Kreylos, Bernd Hamann, Guiseppe Monno, and Oliver G. Staadt. "3D warp brush modeling." Computers & Graphics 30, no. 4 (2006): 610–18. http://dx.doi.org/10.1016/j.cag.2006.03.014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Maleva, A. A., and A. A. Tretyakovа. "PRACTICAL WORK ON 3D MODELING IN KOMPAS-3D." Informatics in school, no. 10 (December 21, 2018): 25–30. http://dx.doi.org/10.32517/2221-1993-2018-17-10-25-30.

Full text

Abstract:

The article presents the practical work for students of the 8th — 9th grades on the development of a 3D model in the KOMPAS-3D program, as well as methodological recommendations for its use by the teacher.

APA, Harvard, Vancouver, ISO, and other styles

25

de la Losa, Arnaud, and Bernard Cervelle. "3D Topological modeling and visualisation for 3D GIS." Computers & Graphics 23, no. 4 (1999): 469–78. http://dx.doi.org/10.1016/s0097-8493(99)00066-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Ju, Seunghwan, Heesuk Seo, and Sunghyu Han. "Light 3D Modeling with mobile equipment." Journal of the Korea Society of Digital Industry and Information Management 12, no. 4 (2016): 107–14. http://dx.doi.org/10.17662/ksdim.2016.12.4.107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Shafran, Yuriy, and Aleksandr Khoperskov. "Modeling of Industrial Ventilation Systems: Design Issue of 3D Computational Mesh." Vestnik Volgogradskogo gosudarstvennogo universiteta. Serija 1. Mathematica. Physica, no. 2 (June 2016): 52–62. http://dx.doi.org/10.15688/jvolsu1.2016.2.6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Khochare, Somnath D., and Ashish P. Waghmare. "3D, 4D and 5D of Buiding Information Modeling For Real Estate Projects." Journal of Advances and Scholarly Researches in Allied Education 15, no. 2 (2018): 293–98. http://dx.doi.org/10.29070/15/56833.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Orujlu, E. N., A. N. Mammadov, and M. B. Babanly. "3D ANALYTICAL MODELING OF CRYSTALLIZATION SURFACES OF THE MnTe–SnTe–Sb2Te3 SYSTEM." Azerbaijan Chemical Journal, no. 2 (June 29, 2021): 94–100. http://dx.doi.org/10.32737/0005-2531-2021-2-94-100.

Full text

Abstract:

An analytical method was used for 3D modeling of crystallization surfaces of the MnTe–SnTe–Sb2Te3 system based on the existing data of boundary systems and a small number of experimental DTA- measurements. All analytical dependencies temperatures on composition for liquidus of the binary and three-system were obtained using the 2D and 3D options of the OriginLab software. The obtained results allowed us to visualize the crystallization surfaces of the phases based on initial components of the MnTe–SnTe–Sb2Te3 system as a separate form and in one graph

APA, Harvard, Vancouver, ISO, and other styles

30

Yekti, Bharoto. "Studi Efektivitas Praktik Modeling Dalam Produksi Asset Animasi Stop Motion Menggunakan 3D Printing." ULTIMART Jurnal Komunikasi Visual 7, no. 2 (2016): 36–46. http://dx.doi.org/10.31937/ultimart.v7i2.384.

Full text

Abstract:

Teknologi 3D printing sudah mulai banyak digunakan di industri animasi terutama animasi stop motion. Penggunaan 3D printer untuk animasi stop motion paling banyak digunakan pada teknik replacement animation. Perangkat lunak yang digunakan untuk membuat aset animasi stop motion tidak terbatas pada jenis perangkat lunak untuk animasi 3 Dimensi (3D) saja, Teknik 3D digital sculpting juga dapat digunakan untuk membentuk 3D model yang kemudian bisa diproses menjadi aset untuk animasi stop motion dengan 3D printer. Penelitian ini membandingkan pembuatan model 3Dimensi yang menggunakan metode polygon

APA, Harvard, Vancouver, ISO, and other styles

31

Chen, Qiang, and Li Mei Xu. "Three-Dimensional Recognition Technology for Rare English Words." Applied Mechanics and Materials 644-650 (September 2014): 4121–24. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.4121.

Full text

Abstract:

This paper mainly studies modeling and recognition of 3D English words’ images. With the development of secondary modeling, segmentation and recognition theories and the application of evolution computation in 3D modeling and recognition, this paper analyzes the issues of parameter fitting in the 3D model, multi-object scene segmentation and parts recognition aiming at the 3D data features in the English words. The 3D model is used as the primitives part to model and segment the scenes and the group parallel evolution and the relationship matching theories are introduced into the 3D modeling a

APA, Harvard, Vancouver, ISO, and other styles

32

GARAYEVA, ENZHE R., ILSIYAR I. BIKMULLINA, and IGOR A. BARKOV. "FEATURES OF PREPARING 3D OBJECTS MODELED IN BLENDER FOR IMPORT INTO UNITY 3D." CASPIAN JOURNAL: Control and High Technologies 52, no. 4 (2020): 66–74. http://dx.doi.org/10.21672/2074-1707.2020.52.4.066-074.

Full text

Abstract:

When developing a game in Unity using 3D models, it became necessary to create your own 3D models, so Unity's own capabilities were analyzed for creating 3D models. Since Unity's capabilities as a 3D modeling environment are limited, third-party software products designed to model 3D objects were considered. As a result of the analysis, the 3D blender editor was chosen for the development of objects, and therefore there was a need to study the features of importing finished objects from Blender to Unity. Unity's decision to use 3D models created in Blender is based on Unity's limited 3D modeli

APA, Harvard, Vancouver, ISO, and other styles

33

Huang, Mu, and Xiao Li Rong. "Geological Modeling System Based on Flash3D Technology." Applied Mechanics and Materials 256-259 (December 2012): 2285–92. http://dx.doi.org/10.4028/www.scientific.net/amm.256-259.2285.

Full text

Abstract:

3D geological modeling is an inter-discipline subject applying computer technology to the geological research. With the development of Internet, 3D geological modeling based on Web has become a hot spot. In this article, we applied the Flash3D technology to the 3D geological modeling based on Web. We designed a process which use borehole data as original data source, automatic interpolation and identify strata from it, then calculate modeling data. We developed a 3D geological and geographical system based on Flex and Java platform using Flash3D engine technology. The system is a true 3D geolo

APA, Harvard, Vancouver, ISO, and other styles

34

van Manen, Teunis, Shahram Janbaz, and Amir A. Zadpoor. "Programming 2D/3D shape-shifting with hobbyist 3D printers." Materials Horizons 4, no. 6 (2017): 1064–69. http://dx.doi.org/10.1039/c7mh00269f.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Ding, Guo Liang, Yi Guo, and Zhi Qiang Li. "Design and 3D Modeling System Development of a Classical V-Belt Drive." Advanced Materials Research 971-973 (June 2014): 428–31. http://dx.doi.org/10.4028/www.scientific.net/amr.971-973.428.

Full text

Abstract:

to realize computer-aided design and 3D modeling of the classical V-belt drive, a classical V-belt drive design and 3D modeling system was developed with the SolidWorks platform and using Visual Basic language. This system is composed of the design subsystem and the 3D modeling subsystem, which enabled the classical V-belt design process to be automatic and the fast 3D modeling of parts and assemblies. The application of design and 3D modeling for the classical V-belt drive system on the pot-seedling hole-forming machine has shown that this system can ensure accurate design results and shorten

APA, Harvard, Vancouver, ISO, and other styles

36

Jiang, Ting Yao, Le Le Cui, and Jia Heng Li. "An Implementation of 3D Landslide Geological Modeling and Visualization." Advanced Materials Research 594-597 (November 2012): 2338–43. http://dx.doi.org/10.4028/www.scientific.net/amr.594-597.2338.

Full text

Abstract:

Three-dimensional (3D) geological modeling and visualization of landslide is very important for landslide monitoring and stability evaluation. Unfortunately there have not been very efficient methods to realize this modeling and visualization process currently. An implementation of 3D landslide geological modeling and visualization based on a hybrid data structure of TIN and GTP is introduced in this paper. The proposed implementation method includes three sections: pre-processing terrain data for known or history data; 3D modeling of landslide terrain surface, slip surface and geological stru

APA, Harvard, Vancouver, ISO, and other styles

37

Куриный, В. В., В. В. Солецкий, and Б. Лю. "Technological Peculiarities of Manufacturing Two-Media UAV Using Fused Deposition Modeling." MORSKIE INTELLEKTUAL`NYE TEHNOLOGII), no. 2(52) (June 20, 2021): 34–41. http://dx.doi.org/10.37220/mit.2021.52.2.049.

Full text

Abstract:

В статье представлены двухсредные дроны разработанные в различных странах мира. Приведены ссылки на источники. Представлена конструкция разработанного в ФГБОУ ВО «КнАГТУ» двухсредного дрона. Разработанный аппарат является конвертопланом. Описана примененная для изготовления двухсредного дрона технология с применением метода послойного наплавления филамента. Описаны выявленные в процессе изготовления и пробной эксплуатации недостатки использованной технологии изготовления дрона и выбранного филамента PLA. Проведен анализ филаментов с целью подбора вида пригодного для изготовления объектов конта

APA, Harvard, Vancouver, ISO, and other styles

38

Wang, Ting Ting. "Simulation and Analysis on Fast Modeling for Large-Scale 3D Dynamic Images." Applied Mechanics and Materials 651-653 (September 2014): 2233–36. http://dx.doi.org/10.4028/www.scientific.net/amm.651-653.2233.

Full text

Abstract:

In the process of modeling of 3D dynamic images, influenced by the large volume of the objects, it is difficult for the traditional method to build a model really show the effects of 3D dynamic images. To solve this problem, the paper proposes a new fast modeling method for large-scale 3D dynamic images through the usage of OpenGL. It promotes the design result from 2D space to 3D space, thus making the images more lifelike. The experiment shows that the 3D dynamic images modeling algorithm can rapidly build the 3D model with excellent effect saving time and improving work efficiency.

APA, Harvard, Vancouver, ISO, and other styles

39

Elchishcheva, T. F. "Architect’s Training in 3D-Modeling Virtual Environment." Voprosy sovremennoj nauki i praktiki. Universitet imeni V.I. Vernadskogo, no. 4(58) (2015): 146–54. http://dx.doi.org/10.17277/voprosy.2015.04.pp.146-154.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

ISE, Keisuke, Yoshito IKEMATA, and Akihito SANO. "2P1-U09 Modeling of 3D Rimless Wheel." Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) 2015 (2015): _2P1—U09_1—_2P1—U09_2. http://dx.doi.org/10.1299/jsmermd.2015._2p1-u09_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Jang, Jun Hee, and Jong Woo Joo. "Image data process for reflector 3D modeling." Journal of Digital Contents Society 20, no. 11 (2019): 2263–71. http://dx.doi.org/10.9728/dcs.2019.20.11.2263.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Mulahusić, Admir, Nedim Tuno, Jusuf Topoljak, and Džemaila Balić. "Using an Imaging Station in making a 3D model of a complex cultural and historical heritage object." Geodetski vestnik 60, no. 01 (2016): 28–41. http://dx.doi.org/10.15292/geodetski-vestnik.2016.01.28-41.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Bolegenova, S. A., A. S. Askarova, A. Bekmukhamet, et al. "3D modeling high temperature flows in the combustion chambers of the power plants." International Journal of Mathematics and Physics 7, no. 1 (2016): 73–82. http://dx.doi.org/10.26577/2218-7987-2016-7-1-73-82.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Han, Youngmo. "3D-Modeling-Based Template Matching." KIPS Transactions on Software and Data Engineering 5, no. 12 (2016): 663–70. http://dx.doi.org/10.3745/ktsde.2016.5.12.663.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Barazzetti, L., M. Previtali, and M. Scaioni. "3D MODELING FROM GNOMONIC PROJECTIONS." ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences I-3 (July 13, 2012): 19–24. http://dx.doi.org/10.5194/isprsannals-i-3-19-2012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Kyratzi, Sofia, and Nickolas S. Sapidis. "3D Object Modeling using Sketches." Information Resources Management Journal 24, no. 4 (2011): 27–49. http://dx.doi.org/10.4018/irmj.2011100102.

Full text

Abstract:

In this paper, the authors present a new algorithm for constructing a solid model when the given input is only one partial-view sketch (“natural sketch”). This algorithm is a two-step process, where first a complete (wireframe) sketch is derived, which is then transformed into a 3D polyhedron. The paper details topological and geometric aspects of the process, as well as the essential “user-interaction” components dealing with cases where the sketch-to-solid problem does not have a unique solution.

APA, Harvard, Vancouver, ISO, and other styles

47

Masiero, A., F. Chiabrando, A. M. Lingua, et al. "3D MODELING OF GIRIFALCO FORTRESS." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-2/W9 (January 31, 2019): 473–78. http://dx.doi.org/10.5194/isprs-archives-xlii-2-w9-473-2019.

Full text

Abstract:

<p><strong>Abstract.</strong> Despite photogrammetry has been longly used for 3D model production, the recent development of structure from motion based reconstructions and the spread of unmanned aerial vehicles (UAV) are increasing its usage even further. Actually, the combined use of nadir and oblique UAV photogrammetry allows to cross the bridge between close range and aerial photogrammetry, enabling the quick acquisition of images for detailed 3D model production. This paper assesses the accuracy of UAV photogrammetry in the reconstruction of a cultural heritage building,

APA, Harvard, Vancouver, ISO, and other styles

48

Hryniewicz, M., I. Sotome, J. Anthonis, H. Ramon, and J. De Baerdemaeker. "3D SURFACE MODELING WITH STEREOVISION." Acta Horticulturae, no. 674 (May 2005): 561–65. http://dx.doi.org/10.17660/actahortic.2005.674.73.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

España, Marı́a Luisa, Frédéric Baret, Franck Aries, M. Chelle, B. Andrieu, and Laurent Prévot. "Modeling maize canopy 3D architecture." Ecological Modelling 122, no. 1-2 (1999): 25–43. http://dx.doi.org/10.1016/s0304-3800(99)00070-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Basarir, Hakan, Celal Karpuz, and Levent Tutluoğlu. "3D Modeling of Ripping Process." International Journal of Geomechanics 8, no. 1 (2008): 11–19. http://dx.doi.org/10.1061/(asce)1532-3641(2008)8:1(11).

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!