Log in

Relevant bibliographies by topics / 3D printing Prototyping / Journal articles

To see the other types of publications on this topic, follow the link: 3D printing Prototyping.

Journal articles on the topic '3D printing Prototyping'

Author: Grafiati

Published: 7 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic '3D printing Prototyping.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Raut, Shrikant V., and R. R. Arakerimath. "Comparison and Selection of Suitable 3D Printing Technology to Replicate Plastic Material Properties for Rapid Prototyping." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 1–3. http://dx.doi.org/10.22214/ijraset.2022.40415.

Full text

Abstract:

Abstract: In R&D there is need of rapid prototyping to validate new concepts. 3D printing is widely used now a days For rapid prototyping of new concepts. As there are numerous 3D printing technologies are available now in market so it is always difficult to select correct 3D printing technology to replicate plastic material as per requirement in prototyping. Engineers in industry initially struggle or spend time to select best suited 3D printing technology for rapid prototyping of their concept or part. In this study we will be reviewing different available 3D printing technologies and it

APA, Harvard, Vancouver, ISO, and other styles

2

Bodani, Jayesh, Urval Panchal, and Prof Marnish Modi. "Research Paper Fabrication of 3D Printer." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 1156–59. http://dx.doi.org/10.22214/ijraset.2022.41481.

Full text

Abstract:

Abstract: 3D printing is called as desktop fabrication. It is a process of prototyping where by a structure is synthesized from a 3d model. The 3d model is stored in as a STL format and then forwarded to a 3D printer. It can use a good range of materials like ABS, PLA, and composites also .3D printing may be a rapidly developing and price optimized sort of rapid prototyping. The 3D printer prints the CAD design layer by layer forming a true object. 3D printing springs from inkjet desktop printers during which multiple deposit jets and therefore the printing material, layer by layer derived fro

APA, Harvard, Vancouver, ISO, and other styles

3

Nugroho, Setiyo adi, and Arie Atwa Magriyanti. "PERKEMBANGAN TEKNOLOGI DALAM PROSES PERCETAKAN 3 DIMENSI DAN APLIKASINYA." Pixel :Jurnal Ilmiah Komputer Grafis 13, no. 1 (2020): 61–68. http://dx.doi.org/10.51903/pixel.v13i1.194.

Full text

Abstract:

Developing of prototype now are became easier with the existence of 3 d printer, now is common known as rapid prototyping method. There are many different method on 3d printing depend on material used for printing. The wide range of material that can be print using 3d printer such as metal to plastic even ceramic. The rapid prototyping using 3d printer have various advantage compare to traditional prototyping. The development of 3d printing makes it not only for prototyping but can be a small batch manufacture, where economic scale of production cannot be reach with traditional production. The

APA, Harvard, Vancouver, ISO, and other styles

4

Li, Bo, Lifan Meng, Hongyu Wang, Jing Li, and Chunmei Liu. "Rapid prototyping eddy current sensors using 3D printing." Rapid Prototyping Journal 24, no. 1 (2018): 106–13. http://dx.doi.org/10.1108/rpj-07-2016-0117.

Full text

Abstract:

Purpose The purpose of this paper is to investigate the process of rapid prototyping eddy current sensors using 3D printing technology. Making full use of the advantages of 3D printing, the authors study on a new method for fabrication of an eddy current sensor. Design/methodology/approach In this paper, the authors establish a 3D model using SolidWorks. And the eddy current sensor is printed by the fused deposition modeling method. Findings Measurement results show that the 3D printing eddy current sensor has a wider linear measurement range and better linearity than the traditional manufactu

APA, Harvard, Vancouver, ISO, and other styles

5

Vega-Feliciano, Josean L., Angélica P. Vera-Torres, Natalia A. Rodríguez-Figueroa, Zairelys A. Reyes-Rivera, Clara E. Isaza, and Mauricio Cabrera-Ríos. "3D Scanning to Enable 3D Printing in Ergonomics Projects." Científica 27, no. 1 (2023): 1–8. http://dx.doi.org/10.46842/ipn.cien.v27n1a01.

Full text

Abstract:

3D Printing is an ideal technology to support prototyping and invention. Its possibilities are, however, limited by the user’s computer-aided modeling skills. Ergonomics would greatly enhance its practice with the adoption of the prototyping capabilities of 3D printers. For this to happen, Industrial Engineers who specialize in Ergonomics must adopt computer-aided modeling courses better suited to this end. Because curriculum modifications usually take a long time in colleges and universities to reflect a change of such nature, this work proposes the use of 3D Scanning to circumvent some of th

APA, Harvard, Vancouver, ISO, and other styles

6

Kahr, Matthias, Wilfried Hortschitz, Harald Steiner, Michael Stifter, Andreas Kainz, and Franz Keplinger. "Novel 3D-Printed MEMS Magnetometer with Optical Detection." Proceedings 2, no. 13 (2018): 783. http://dx.doi.org/10.3390/proceedings2130783.

Full text

Abstract:

This paper reports a novel 3D printed MEMS magnetometer with optical readout, which demonstrates the advantages of 3D printing technology in terms of rapid prototyping. Low-cost and fast product development cycles favour 3D printing as an effective tool. Sensitivity measurement with such devices indicate high accuracy and good structural performance, considering material and technological uncertainties. This paper is focusing on the novelty of the rapid, 3D-printing prototyping approach and verification of the working principle for printed MEMS magnetometers.

APA, Harvard, Vancouver, ISO, and other styles

7

Khona, Nilesh Bharat. "Design and Fabrication of Arduino Based Flexible Manufacturing Process on the Desk: 3D Printing." International Journal for Research in Applied Science and Engineering Technology 10, no. 6 (2022): 2603–10. http://dx.doi.org/10.22214/ijraset.2022.44427.

Full text

Abstract:

Abstract: Rapid prototyping technology also referred to as additive manufacturing or 3D printing, which can be used to create physical objects from geometrical representation by successive addition of materials in layer-by-layer form. 3D printing technology is the fastest emerging technology used to make work easier. It can be used in a wide range of materials such as PLA, ABS, HIPS & composite. 3D printing is a rapidly growing and very perfectly cost optimized form of rapid prototyping. 3D printing technology is appreciable in future challenges for mass production. This type of printing i

APA, Harvard, Vancouver, ISO, and other styles

8

Vorunichev, D. S., and K. Yu Vorunicheva. "Current capabilities of prototyping technologies for multilayer printed circuit boards on a 3D printer." Russian Technological Journal 9, no. 4 (2021): 28–37. http://dx.doi.org/10.32362/2500-316x-2021-9-4-28-37.

Full text

Abstract:

A new direction in 3D printing was investigated – prototyping of single-sided, double-sided and multilayer printed circuit boards. The current capabilities and limitations of 3D printed circuit board printing technology were identified. A comparative analysis of the characteristics of two desktop 3D printers presented in the industry for prototyping radio electronics, as well as the first professional machine DragonFly LDM 2020, which is a mini-factory for prototyping multilayer printed circuit boards, was carried out. The first practical experience of working and printing on DragonFly LDM 202

APA, Harvard, Vancouver, ISO, and other styles

9

Sedunin, Vyacheslav, Yuri Marchenko, and Ilya Kalinin. "PROTOTYPING OF CENTRIFUGAL MICROCOMPRESSORS USING ADDITIVE TECHNOLOGIES." Perm National Research Polytechnic University Aerospace Engineering Bulletin, no. 67 (2021): 27–34. http://dx.doi.org/10.15593/2224-9982/2021.67.03.

Full text

Abstract:

In the fast-developing market of customer products, a development lead time becomes more and more critical. However, these technologies have limits. Also, the application of so-called additive manufacturing technologies, particularly FDM 3D printing, is limited by the materials used and the part’s quality. The significant advantage of additive manufacturing is building components without the use of molds or tools. The paper presents an experience of fast prototyping a centrifugal compressor using 3D printing with polymer plastics. 3D printing of parts has the main goal in this study to develop

APA, Harvard, Vancouver, ISO, and other styles

10

Hems, Edward, and Nigel J. Knott. "3D printing in prosthodontics." Faculty Dental Journal 5, no. 4 (2014): 152–57. http://dx.doi.org/10.1308/204268514x14096686726120.

Full text

Abstract:

A technological revolution in dentistry is creating new paradigms of innovation that were unimaginable only a decade ago. A bull has entered the antique china shop and is running rampant among long-established manufacturing practices dependent upon expensive human skills and craftsmanship. Adventurous dental technophiles and their patients are beginning to enjoy a new world of peerless technical excellence with prodigious potential. The digitisation of dental processes, which includes 3D printing (or rapid prototyping) is beginning to deliver real firepower in dental surgeries.

APA, Harvard, Vancouver, ISO, and other styles

11

Yusof, Yusri, and Mohd Noor Hakim Samson. "Manufacturing of Biocompatible Implant Component Using Rapid Prototyping Technology." Advanced Materials Research 213 (February 2011): 25–30. http://dx.doi.org/10.4028/www.scientific.net/amr.213.25.

Full text

Abstract:

The purpose of this research is to study the manufacturing of biocompatible implant component by using rapid prototyping technology, in particular of 3D printing process. The biocompatible material consist of 80% cobalt-chromium-HAP were prepared by mechanically blended with 10% maltodextrin and 10% polyvinyl alcohol as binding mechanism for 3D printing process. Test specimens were fabricated using experimental 3D printing machine followed by sintering process. The characteristic of the composites were studied using various techniques including Scanning Electron Microscope (SEM and EDS), hardn

APA, Harvard, Vancouver, ISO, and other styles

12

Oleksy, Małgorzata, Klaudia Dynarowicz, and David Aebisher. "Rapid Prototyping Technologies: 3D Printing Applied in Medicine." Pharmaceutics 15, no. 8 (2023): 2169. http://dx.doi.org/10.3390/pharmaceutics15082169.

Full text

Abstract:

Three-dimensional printing technology has been used for more than three decades in many industries, including the automotive and aerospace industries. So far, the use of this technology in medicine has been limited only to 3D printing of anatomical models for educational and training purposes, which is due to the insufficient functional properties of the materials used in the process. Only recent advances in the development of innovative materials have resulted in the flourishing of the use of 3D printing in medicine and pharmacy. Currently, additive manufacturing technology is widely used in

APA, Harvard, Vancouver, ISO, and other styles

13

K, Anoosha. "REVERSE ENGINEERING AND PROTOTYPING OF TWO WHEELER SPROCKET HUB." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem31237.

Full text

Abstract:

This project successfully reverse engineered and prototyped a two-wheeler sprocket hub. A 3D scanner captured the geometry of the original sprocket hub, generating precise data for a digital model. Geomagic software was then utilized to process the scan data and create an STL file, suitable for 3D printing. The final stage involved 3D printing the sprocket hub prototype using a material chosen for its strength and durability. This project not only achieved a comprehensive understanding of the sprocket hub's design through 3D scanning, but also produced a functional prototype for comparison wit

APA, Harvard, Vancouver, ISO, and other styles

14

Cykowska-Błasiak, Małgorzata, and Paweł Ozga. "3D printing, as a tool for planning orthopedic surgery." Budownictwo i Architektura 14, no. 1 (2015): 015–23. http://dx.doi.org/10.35784/bud-arch.1662.

Full text

Abstract:

The purpose of the literature review is to determine the scope of 3D printing, also known as RP (Rapid Prototyping) applications in manufacturing medical model based on CJP (Collor Jet Printing) technology, with emphasis on the use in orthopedic surgery planning. The research of the presented method will be focused on the financial aspect. Researchers accept as axiomatic fact that the main buyer of the MRP (Medical Rapid Prototyping) structure will be the patient while the recipient will be the doctor or surgeon that provides the operation. Using available open-source software solutions

APA, Harvard, Vancouver, ISO, and other styles

15

Siregar, Wandro, Richard A. M. Napitupulu, and Parulian Siagian. "Desain dan Manufaktur Model Piston Jupiter MX 135 cc Dengan Menggunakan 3D Printer." SPROCKET JOURNAL OF MECHANICAL ENGINEERING 1, no. 2 (2020): 73–80. http://dx.doi.org/10.36655/sprocket.v1i2.161.

Full text

Abstract:

A product that will be mass produced requires an initial prototype so that it can assess whether a product design meets the desired criteria and is ready to be mass produced. For the purposes of making the initial prototyping, one alternative is to use 3D printing. Prototyping is an early example of a concept as part of the product development process. Rapid Prototyping allows the visualization of a 3D (three-dimension) image into an original three-dimensional object that has a volume. In addition, rapid prototyping products can also be used to test certain parts. In the design process the 201

APA, Harvard, Vancouver, ISO, and other styles

16

Kovalcik, Adriana. "Recent Advances in 3D Printing of Polyhydroxyalkanoates: A Review." EuroBiotech Journal 5, no. 1 (2021): 48–55. http://dx.doi.org/10.2478/ebtj-2021-0008.

Full text

Abstract:

Abstract In the 21st century, additive manufacturing technologies have gained in popularity mainly due to benefits such as rapid prototyping, faster small production runs, flexibility and space for innovations, non-complexity of the process and broad affordability. In order to meet diverse requirements that 3D models have to meet, it is necessary to develop new 3D printing technologies as well as processed materials. This review is focused on 3D printing technologies applicable for polyhydroxyalkanoates (PHAs). PHAs are thermoplastics regarded as a green alternative to petrochemical polymers.

APA, Harvard, Vancouver, ISO, and other styles

17

Deepika, K. "Modelling and 3d Printing of 4 - Cylinder Engine Block." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 05 (2025): 1–9. https://doi.org/10.55041/ijsrem48781.

Full text

Abstract:

Abstract The advancement of additive manufacturing has revolutionized the prototyping and fabrication of complex mechanical systems, including internal combustion engines. This study focuses on the design, Modelling, and 3D printing of a four-cylinder engine block, replicating its structural and functional features with high precision. Computer-Aided Design (CAD) software was employed to create detailed component models, ensuring accurate dimensions, proper assembly compatibility, and functional motion. The fabrication process utilized Fused Deposition Modelling (FDM) technology with high-stre

APA, Harvard, Vancouver, ISO, and other styles

18

Kramer, Robert C. L. N., Eleonoor J. Verlinden, Livia Angeloni, et al. "Multiscale 3D-printing of microfluidic AFM cantilevers." Lab on a Chip 20, no. 2 (2020): 311–19. http://dx.doi.org/10.1039/c9lc00668k.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Talekar, P. R. "3D Printing: An Introduction to Its Growing Demand and Applications." International Journal of Advance and Applied Research 6, no. 25 (2025): 78–83. https://doi.org/10.5281/zenodo.15290403.

Full text

Abstract:

The process of additive manufacturing, commonly referred to as 3D printing, has transformed a number of sectors by making it possible to produce intricate structures quickly and affordably. A short introduction of 3D printing is given in this paper, emphasizing its wide range of uses and rising demand. This technology's capacity to produce specialized, lightweight, and effective designs in industries like everyday goods, manufacturing, medical equipment, and transportation it is that is driving its growing usage. Prosthetics, bioprinting, and tailored implants are among the medical application

APA, Harvard, Vancouver, ISO, and other styles

20

Akash, Yadav, Swarup J. Chatterjee Dr., and Singh Satyam. "A Review: History of 3D Printing." International Journal of Innovative Science and Research Technology (IJISRT) 9, no. 11 (2024): 1787–91. https://doi.org/10.5281/zenodo.14280886.

Full text

Abstract:

However, the term 3D printing is commonly used to describe an assembling process whereby the final shape of the object results from the addition of several layers of build for the skeleton of the object. This process is better described as additive manufacturing and also referred to as rapid prototyping. After all, the term 3D printing, on the whole, is relatively new, and has been an active part of the current developments in Dentistry. Much publicity encompasses the evolution of 3D printing which is pro-claimed as an innovation that will change CAM manufacturing perpetually, including in the

APA, Harvard, Vancouver, ISO, and other styles

21

Wypysiński, Rafał. "New aspects of 3D printing by robots." Advanced Technologies in Mechanics 3, no. 2(7) (2017): 17. http://dx.doi.org/10.17814/atim.2016.2(7).40.

Full text

Abstract:

Additive technologies are common field of industry and daily life. Almost everyone heard about 3D printing and rapid prototyping technologies. Dynamic evolution of methods gives us new possibilities and open new chances. Let’s look on 3D robot printing, its limitation and advantages.

APA, Harvard, Vancouver, ISO, and other styles

22

Ahmad Zamri, Ahmad Fazlan, Nurul â€˜Ayn Ahmad Sayuti, Abu Hanifa Ab Hamid, and Muhamad Aiman Afiq Mohd Noor. "Additive Manufacturing-3D Printing in Product Design Education: Learning experiences using Fused Deposition Modeling (FDM)." Environment-Behaviour Proceedings Journal 7, SI9 (2022): 511–16. http://dx.doi.org/10.21834/ebpj.v7isi9.4300.

Full text

Abstract:

This research on the participation of industrial design studentsâ€™ experiences in 3D printing and 3D modelling demonstrates that they are successful in fully utilising additive manufacturing in the design process and as a final fabrication method in the product design area. The project begins with the literature review, prototyping tests, and students' participation in 3D modelling in the specific subject of industrial design. The outcome shared a guideline for how to use Rapid Prototyping (RP) 3D Printers in the model-making and prototyping processes. The result was an example of a design pr

APA, Harvard, Vancouver, ISO, and other styles

23

Balanovskii, A. E., V. Yu Konyukhov, and T. A. Oparina. "Prototyping of metal products of various shapes using additive manufacturing." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 81, no. 3 (2025): 18–31. https://doi.org/10.32339/0135-5910-2025-03-18-23.

Full text

Abstract:

Additive manufacturing or 3D printing is replacing traditional subtractive manufacturing, where parts are made by successively removing parts of the workpiece material. In 3D printing, material is added layer by layer, which allows for the production of parts with complex geometric shapes from expensive metals with higher productivity and cost efficiency. In order to carry out 3D printing on an industrial scale, it is necessary to combine robotics with 3D printing software. This article presents the results of adapting an industrial KUKA robot to the 3D printing process. Objects of cylindrical

APA, Harvard, Vancouver, ISO, and other styles

24

Kumar, Ch Jeevan. "PROTOTYPING OF A TWO WHEELER CLUTCH HUB USING REVERSE ENGINEERING TECHNOLOGY." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem32113.

Full text

Abstract:

A clutch hub is a critical component in a two wheeler manual transmission system, responsible for transferring rotational power from the engine to the transmission gears and providing a mechanism for disengaging the gears to allow for smooth gear changes. The clutch hub is placed between clutch basket and pressure plate. The clutch plates are mounted on it. It has teeth at center hole which rotate with main shaft. The prototyping of clutch hub using reverse engineering technique, making it essential to understand its design and functionality reverse engineering is employed to deconstruct an ex

APA, Harvard, Vancouver, ISO, and other styles

25

Šafka, Jiří, Filip Veselka, Martin Lachman, and Michal Ackermann. "Rapid Prototyping Technology for Special Pressure Vessels." Materials Science Forum 919 (April 2018): 222–29. http://dx.doi.org/10.4028/www.scientific.net/msf.919.222.

Full text

Abstract:

The article deals with the topic of 3D printing of pressure vessels and their testing. The main focus of the research was on a 3D model of the pressure vessel, which was originally designed for a student formula racing car project. The described virtual 3D model was designed with regard to 3D printing. The physical model was manufactured using several additive manufacturing technologies. The first technology was FDM using ULTEM 1010 material. The next technology was SLS (Selective Laser Sintering) using polyamide materials (PA3200GF and PA2220). The last technology was SLA (Stereolithography)

APA, Harvard, Vancouver, ISO, and other styles

26

Zhao, Changlong, Qiyin Lv, and Wenzheng Wu. "Application and Prospects of Hydrogel Additive Manufacturing." Gels 8, no. 5 (2022): 297. http://dx.doi.org/10.3390/gels8050297.

Full text

Abstract:

Hydrogel has become a commonly used material for 3D and 4D printing due to its favorable biocompatibility and low cost. Additive manufacturing, also known as 3D printing, was originally referred to as rapid prototyping manufacturing. Variable-feature rapid prototyping technology, also known as 4D printing, is a combination of materials, mathematics, and additives. This study constitutes a literature review to address hydrogel-based additive manufacturing technologies, introducing the characteristics of commonly used 3D printing hydrogel methods, such as direct ink writing, fused deposition mod

APA, Harvard, Vancouver, ISO, and other styles

27

Koo, Jing Wee, Jia Shin Ho, Jia An, Yi Zhang, Chee Kai Chua, and Tzyy Haur Chong. "3D Printing in the Water Treatment Industry." Diffusion Foundations and Materials Applications 31 (November 30, 2022): 1–5. http://dx.doi.org/10.4028/p-s3n109.

Full text

Abstract:

The advancement of 3D printing in the past few decades propelled many ground-breaking developments in the water treatment industry. More specifically, 3D printing has the unique advantage of prototyping parts of high complexity with acute precision within a short period of time. Innovative feed spacers and membranes, which could not be fabricated using conventional methods, can now be 3D printed and evaluated in actual filtration experiments. However, there are still limitations to 3D printing such as the printing resolution, build volume and printing speed which poses some problems, especiall

APA, Harvard, Vancouver, ISO, and other styles

28

M, Naveen, Rajath HG, and Prashanth S. "FUSED LAYER MODELING 3D PRINTING MACHINE." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 07, no. 09 (2023): 1–11. http://dx.doi.org/10.55041/ijsrem25792.

Full text

Abstract:

The study aimed to deepen understanding of additive manufacturing, covering techniques, benefits, trends, and challenges. This knowledge was applied to refine a commercial 3D printer prototype and establish guidelines for practical 3D design. Key aspects included additive manufacturing principles, prototyping, and design, with data collected through model assessments and 3D design processes. An analysis of 3D printing's evolution revealed its extensive impact on society, economy, geopolitics, security, and the environment. A comparative evaluation of existing 3D printing solutions considered c

APA, Harvard, Vancouver, ISO, and other styles

29

Li, Ruixiu, Yu-Huan Ting, Souha H. Youssef, Yunmei Song, and Sanjay Garg. "Three-Dimensional Printing for Cancer Applications: Research Landscape and Technologies." Pharmaceuticals 14, no. 8 (2021): 787. http://dx.doi.org/10.3390/ph14080787.

Full text

Abstract:

As a variety of novel technologies, 3D printing has been considerably applied in the field of health care, including cancer treatment. With its fast prototyping nature, 3D printing could transform basic oncology discoveries to clinical use quickly, speed up and even revolutionise the whole drug discovery and development process. This literature review provides insight into the up-to-date applications of 3D printing on cancer research and treatment, from fundamental research and drug discovery to drug development and clinical applications. These include 3D printing of anticancer pharmaceutics,

APA, Harvard, Vancouver, ISO, and other styles

30

Zhou, Fei, Guo Min Lin, Wen Guang Zhang, and Miao Shang. "3D Printing Technology and the Latest Application in the Aviation Area." Advanced Materials Research 912-914 (April 2014): 1057–60. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.1057.

Full text

Abstract:

The basic working principles of 3-D printing technologyare introduced, development situation of Additive Manufacturing technology athome and abroad are described. The present status and latest achievements ofrapid prototyping (RP) technology that apply in the field of aviation in homeand abroad are described and analyzed in detail. The importance of 3-D printingis pointed out for aeronautical manufacturing.

APA, Harvard, Vancouver, ISO, and other styles

31

Omaia, Derzu, Walter F. M. Correia, and Andre L. M. Santos. "Interactive rapid prototyping combining 3D Printing and Augmented Reality." Journal on Interactive Systems 15, no. 1 (2024): 20–35. http://dx.doi.org/10.5753/jis.2024.3534.

Full text

Abstract:

In the development of new products by the industry, a rapid prototyping stage is recommended so that an initial version of the product can be evaluated. In this way, any necessary corrections can be applied while still in the prototyping stage, preventing design errors from reaching the final product. Augmented Reality (AR) and 3D Printing are techniques that have become ubiquitous in recent years due to the reduction of equipment costs. Several works in the area of rapid prototyping have been developed with one of these techniques in isolation; a few works have tried to unite these two tools.

APA, Harvard, Vancouver, ISO, and other styles

32

Ambrosi, Adriano, and Martin Pumera. "3D-printing technologies for electrochemical applications." Chemical Society Reviews 45, no. 10 (2016): 2740–55. http://dx.doi.org/10.1039/c5cs00714c.

Full text

Abstract:

Since its conception during the 80s, 3D-printing has been receiving unprecedented levels of attention from industry and research laboratories, in addition to end users. Enabling almost infinite possibilities for rapid prototyping, 3D-printing is being considered as fabrication tool in numerous research fields including electrochemistry which can certainly exploit the advantages of this technology for sensing, energy-related and synthetic applications.

APA, Harvard, Vancouver, ISO, and other styles

33

Zhang, Chengsen, Brandon J. Bills, and Nicholas E. Manicke. "Rapid prototyping using 3D printing in bioanalytical research." Bioanalysis 9, no. 4 (2017): 329–31. http://dx.doi.org/10.4155/bio-2016-0293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Brommer, Dieter B., Tristan Giesa, David I. Spivak, and Markus J. Buehler. "Categorical prototyping: incorporating molecular mechanisms into 3D printing." Nanotechnology 27, no. 2 (2015): 024002. http://dx.doi.org/10.1088/0957-4484/27/2/024002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Budzinski, Christel. "3D Printing for Prototyping - An Innovative Manufacturing Technology." Optik & Photonik 9, no. 4 (2014): 23. http://dx.doi.org/10.1002/opph.201490069.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Ali, Shahid, Deepak Kumar Chaurasia, and Dr Tarkeshwar P. Shukla. "A Review: 3D Printing." International Journal for Research in Applied Science and Engineering Technology 10, no. 12 (2022): 1939–41. http://dx.doi.org/10.22214/ijraset.2022.48301.

Full text

Abstract:

Abstract: 3D printing or additive manufacturing is a method of creating three dimensional solid matters from a digital file. The design of a 3D printed object is accomplish using additive processes it is also called as RAPID PROTOTYPING. In an additive process an object is manufactured by dozing consecution layers of material as far as the entire object is created.3D concept has the capabilities to furnish benefits for patients, pharmacists and the pharmaceutical industry alike by empower the on-demand design and production of various formulations with individualized dosages, shapes, sizes, dr

APA, Harvard, Vancouver, ISO, and other styles

37

Slavkina, Viktoriya E. "Material Selection for Prototyping a Heat Exchanger Cover Using Additive Technology." Elektrotekhnologii i elektrooborudovanie v APK 48, no. 4 (2021): 68–74. http://dx.doi.org/10.22314/2658-4859-2021-68-4-68-74.

Full text

Abstract:

The development of new designs involves repeated tests confirming their operability. One of the promising methods of producing prototypes for testing their working capacity is additive manufacturing. To date, the most widespread 3D printing technology is Fused deposition modeling. The advantages of this method over other 3D printing technologies are the simplicity of the process and the availability of equipment and materials, their wide range, which allows you to vary the properties of the product. The article describes the application of the technology for the manufacture of a prototype of a

APA, Harvard, Vancouver, ISO, and other styles

38

Tasoglu, Savas, and Albert Folch. "Editorial for the Special Issue on 3D Printed Microfluidic Devices." Micromachines 9, no. 11 (2018): 609. http://dx.doi.org/10.3390/mi9110609.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Dwi, Hadi Sulistyarini, Puspita Andriani Debrina, Darmawan Zefry, and Hadi Setyarini Putu. "IMPLEMENTATION OF RAPID PROTOTYPING POLYLACTIC ACID USING 3D PRINTING TECHNOLOGY FOR EARLY EDUCATION APPLICATIONS." Eastern-European Journal of Enterprise Technologies 6, no. 1(108) (2020): 20–26. https://doi.org/10.15587/1729-4061.2020.216382.

Full text

Abstract:

One of the technologies that are developing rapidly is 3D printing. 3D printing machines can create objects easily, quickly and in detail. There are three main steps that a 3D printing machine goes through, namely design, printing and finishing. 3D printers using polylactic acid are widely used in various types of fields such as industrial machinery, spacecraft, consumer goods, electronic components, vehicles, medical industry, toy industry and others. In this research, we succeeded in making an educational game tool called Tetris with the 3D printing method using polylactic acid filaments. Th

APA, Harvard, Vancouver, ISO, and other styles

40

Piri, Hossein, Xiaotao T. Bi, Hui Li, and Haijiang Wang. "3D-printed fuel-cell bipolar plates for evaluating flow-field performance." Clean Energy 4, no. 2 (2020): 142–57. http://dx.doi.org/10.1093/ce/zkaa007.

Full text

Abstract:

Abstract In the last decade, many researchers have focused on developing fuel-cell flow-field designs that homogeneously distribute reactants with an optimum pressure drop. Most of the previous studies are numerical simulations and the few experimental studies conducted have used very simple flow-field geometries due to the limitations of the conventional fabrication techniques. 3D printing is an excellent rapid prototyping method for prototyping bipolar plates (BPPs) to perform experiments on new flow-field designs. The present research investigates the applicability of different 3D-printed B

APA, Harvard, Vancouver, ISO, and other styles

41

Crăciun, Răzvan Sebastian, Georgiana Alexandra Moroșanu, and Virgil Gabriel Teodor. "Improving the Quality of Small Pieces Made by Rapid Prototyping." Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building 39, no. 1 (2022): 19–24. http://dx.doi.org/10.35219/tmb.2021.1.03.

Full text

Abstract:

Rapid Prototyping is the rapid fabrication of a part, model, or physical assembly that was designed using any design software (Autodesk Inventor Professional in this case), which is a CAD (Computer-Aided Design) application that helps in the creation of a digital prototype. The creation of the part, model, or assembly is usually completed using the manufacture of additives or more commonly known as 3D printing. The paper presents a 3D design, 3D printing, and verifying the actual dimensions of the printed „washer”. The purpose of this paper is to verify that printing errors are controllable an

APA, Harvard, Vancouver, ISO, and other styles

42

Crăcun, Răzvan-Sebastian, Georgiana Alexandra Moroșanu, and Virgil Gabriel Teodor. "IMPROVING THE QUALITY OF SMALL PIECES MADE BY RAPID PROTOTYPING." Annals of ”Dunarea de Jos” University of Galati, Fascicle V, Technologies in machine building 39 (July 25, 2024): 19–24. http://dx.doi.org/10.35219/tmb.2021.03.

Full text

Abstract:

Rapid Prototyping is the rapid fabrication of a part, model, or physical assembly that was designed using any design software (Autodesk Inventor Professional in this case), which is a CAD (Computer-Aided Design) application that helps in the creation of a digital prototype. The creation of the part, model, or assembly is usually completed using the manufacture of additives or more commonly known as 3D printing. The paper presents a 3D design, 3D printing, and verifying the actual dimensions of the printed „washer”. The purpose of this paper is to verify that printing errors are controllable an

APA, Harvard, Vancouver, ISO, and other styles

43

Fuad Hilmy, Endang Mawarsih, and Rizal Firmansyah. "Pelatihan Proses Slicing Untuk Menentukan Parameter Optimal Dalam Proses 3D Printing (Additive Manufacturing)." JURPIKAT (Jurnal Pengabdian Kepada Masyarakat) 6, no. 2 (2025): 1059–67. https://doi.org/10.37339/jurpikat.v6i2.2271.

Full text

Abstract:

Additive Manufacturing merupakan istilah formal dari rapid prototyping atau yang lebih populer disebut 3D Printing. Proses 3D Printing terjadi dengan menambahkan material lapis demi lapis mengikuti design 3D. Software CAD digunakan khusus untuk membantu dalam proses pembuatan model 3D contohnya Inventor, Solidwork, dll. STL merupakan file output yang dihasilkan supaya dapat diproses oleh software slicing. Proses slicing bertujuan uantuk mengubah model 3D menjadi instruksi yang dapat diikuti oleh printer 3D. Slicing adalah proses memecah model 3D menjadi lapisan-lapisan horizontal yang tipis me

APA, Harvard, Vancouver, ISO, and other styles

44

Siddiqui, Maimuna. "MODELLING AND 3D-PRINTING OF BEVEL GEAR." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33290.

Full text

Abstract:

Bevel gear have teeth cut on conical blanks. The gear pair is used to connect non-parallel intersecting shafts for motor transmissions, differential drives and mechanical instruments. Bevel gears are used for transmission of power between axles in rear wheel of vehicle will be modelled by using solid works. Shaping, Casting and Grinding are the traditional methods of manufacturing of bevel gear which are time consuming, and increased in production cost. To overcome this, new method such as rapid prototyping method of manufacturing is used which offers the potential for faster and more cost-eff

APA, Harvard, Vancouver, ISO, and other styles

45

Rathod, Vijaysing Thau, and Dr B. N. Sontakke. "Applications of PolyJet 3D Printing in Biomedical and Industrial Engineering." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 07 (2025): 1–9. https://doi.org/10.55041/ijsrem51296.

Full text

Abstract:

PolyJet 3D printing technology has emerged as a versatile additive manufacturing process that enables high-resolution, multi-material fabrication with applications in both biomedical and industrial engineering. This study explores the capabilities of PolyJet 3D printing, highlighting its role in producing customized prosthetics, bio-models, and surgical tools in the biomedical field, as well as functional prototypes, tooling, and composite parts in industrial applications. The ability to print intricate geometries with a wide range of digital materials, including biocompatible resins and high-

APA, Harvard, Vancouver, ISO, and other styles

46

Li, Feng, Niall P. Macdonald, Rosanne M. Guijt, and Michael C. Breadmore. "Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing." Lab on a Chip 19, no. 1 (2019): 35–49. http://dx.doi.org/10.1039/c8lc00826d.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Singare, S., Shou Yan Zhong, and Zhen Zhong Sun. "A Method to Fabricate Liver Tissue Engineering Scaffold." Journal of Biomimetics, Biomaterials and Tissue Engineering 11 (September 2011): 73–80. http://dx.doi.org/10.4028/www.scientific.net/jbbte.11.73.

Full text

Abstract:

In this paper, the authors describe a rapid prototyping method to produce vascularized tissue such as liver scaffold for tissue engineering applications. A scaffold with an interconnected channel was designed using a CAD environment. The data were transferred to a Polyjet 3D Printing machine (Eden 250, Object, Israel) to generate the models. Based on the 3D Printing model, a PDMS (polydimethyl-silicone) mould was created which can be used to cast the biodegradable material. The advantages and limitations of Rapid Prototyping (RP) techniques as well as the future direction of RP development in

APA, Harvard, Vancouver, ISO, and other styles

48

Sekou, Singare, Shou Yan Zhong, and Zhen Zhong Sun. "The Use of Rapid Prototyping to Fabricate Liver Tissue Engineering Scaffold." Advanced Materials Research 328-330 (September 2011): 658–61. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.658.

Full text

Abstract:

In this papers, the authors described a rapid prototyping method to produce vascularized tissue such liver scaffold for tissue engineering applications. A scaffold with interconnected channel was designed using CAD environment. The data were transferred to a Polyjet 3D Printing machine (Eden 250, Object, Israel) to generate the models. Based on the 3D Printing model, a PDMS (polydimethyl-silicone) mould was created which can be used to cast the biodegradable poly (L-lactic-co-glycolic acid) (PLGA )material. The advantages and limitations of Rapid Prototyping (RP) techniques as well as the futu

APA, Harvard, Vancouver, ISO, and other styles

49

Senkoylu, Alpaslan, Ismail Daldal, and Mehmet Cetinkaya. "3D printing and spine surgery." Journal of Orthopaedic Surgery 28, no. 2 (2020): 230949902092708. http://dx.doi.org/10.1177/2309499020927081.

Full text

Abstract:

Rapid prototyping (RP), also known as three-dimensional printing (3DP), allows the rapid conversion of anatomical images into physical components by the use of special printers. This novel technology has also become a promising innovation for spine surgery. As a result of the developments in 3DP technology, production speeds have increased, and costs have decreased. This technological development can be used extensively in different parts of spine surgery such as preoperative planning, surgical simulations, patient–clinician communication, education, intraoperative guidance, and even implantab

APA, Harvard, Vancouver, ISO, and other styles

50

Gao, Kuan, Ye Tao, Kai Zhang, and Lu Xiang Song. "Research on Common Problems Based on a Desktop 3D Printer." Applied Mechanics and Materials 757 (April 2015): 175–78. http://dx.doi.org/10.4028/www.scientific.net/amm.757.175.

Full text

Abstract:

3D printing, that is, a kind of rapid prototyping technology, it is a kind of based on the digital model file, using the powder metal or plastic adhesive materials, such as to construct the object by means of step by step a print technology. 3D printing technology rapid development in recent years, It has to develop in the direction of miniature and generalization slowly from large professional, desktop 3D printing equipment is the representative products in this process. Based on the principle and characteristics of 3D printing, use the desktop 3D printer, the causes of some common problems i

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!