Relevant bibliographies by topics / 3D printng

Contents

  1. Dissertations / Theses

Academic literature on the topic '3D printng'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '3D printng.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "3D printng"

1

Tipton, Roger B. "Direct Print Additive Manufacturing of Optical Fiber Interconnects." Scholar Commons, 2018. https://scholarcommons.usf.edu/etd/7651.

Full text
Abstract:
High performance communications, sensing and computing systems are growing exponentially as modern life continues to rely more and more on technology. One of the factors that are currently limiting computing and transmission speeds are copper wire interconnects between devices. Optical fiber interconnects would greatly increase the speed of today’s electronic devices. In this study it has been demonstrated that by using a new Direct Print Additive Manufacturing (DPAM) process of Fused Deposition Modeling (FDM) of plastic and micro-dispensin
APA, Harvard, Vancouver, ISO, and other styles
2

Sheikh, Mustafa, and Yasin Zahedi. "3D-Printing av betongÄr det möjligt att printa ut enfamiljshus i Sverige?" Thesis, Örebro universitet, Institutionen för naturvetenskap och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-94403.

Full text
Abstract:
Byggbranschen är alltid i förändring och sättet att bygga utvecklas ständigt inom byggbranschen. Att bygga enfamiljshus idag krävs det mycket arbete och byggbranschen kritiseras ofta när det gäller hastighet som behövs för nybyggnationer. Byggbranschen behöver därför en ny metod och kanske kan 3D-printing vara en alternativ lösning i framtiden. Detta examensarbete syftar därför till att undersöka om det finns möjligheter att kunna bygga enfamiljshus i Sverige med hjälp av 3D-printing. Underökningens har genomförts genom att intervjua olika personer samt söka information på Internet.Syfte med f
APA, Harvard, Vancouver, ISO, and other styles
3

JOHANSSON, ANNA. "3D-2D-3D." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-18108.

Full text
Abstract:
The area of this work is a combination of draping and printing. It strives towards the technique that dazzles the eye with illusions of more than one dimension. As a viewer you will believe that the prints are real drapings while they are flat surfaces. Today prints in fashion are categorized as placed prints or all-over prints, and generally created as a flat surface to decorate the garments. In this work the idea is to manipulate and challenge the boundaries of print and give it life through the body shapes and in the movement. Potentially this work could be an introduction to a new way of w
APA, Harvard, Vancouver, ISO, and other styles
4

Lundberg, Rasmus. "Kontextuell helhet av 3D-printad träullsandwich - Från prefab till printning in-situ." Thesis, KTH, Arkitektur, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-273734.

Full text
Abstract:
Projektet syftar till att föreslå en rimlig riktning för hur additiva produktionsmetoder, alltså tillverkningsmetoder som använder lager-på-lager-teknik, kan tänkas påverka arkitekturen, att försöka sätta sig in i teknikerna och komma fram till vilken riktning som upplevs mest givande eller gångbar. Hur ska man nyttja potentialen med den nya tekniken på ett bra sätt? Jag har försökt ta fram en produkt som nyttjar potentialen hos de additiva produktionsmetoderna och som upplevs tänkbar för fullskalig realisering i byggsektorn i en närliggande framtid. Produkten består av en metod för framställn
APA, Harvard, Vancouver, ISO, and other styles
5

Shanmugham, Chetiyar Krishna Kumar, and Venkata Sri Sai Sumanth Galla. "Measurement of Surface Defects in 3D Printed Models." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-32487.

Full text
Abstract:
The ease of manufacturing using additive manufacturing (3D-Printing) reduces the overall production cost compared with the traditional manufacturing techniques. Because of the benefits of 3D printing technologies, it is proposed to be used in manufacturing of different products. But there are some flaws that are causing significant effect on 3D printed models which degrades the quality of the product. Hence in order to handle these defects, different measurement techniques are needed to quantify the defects that are seen on the surface of 3D-printed models. In our study there are two experimen
APA, Harvard, Vancouver, ISO, and other styles
6

Alkhado, Fidan. "3D-printing Framtidens läkemedelstillverkning." Thesis, Uppsala universitet, Institutionen för farmaceutisk biovetenskap, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-441011.

Full text
Abstract:
Introduktion: Tredimensionell printing (3DP) är en teknik som använder en digital fil för att producera ett 3D-objekt, exempelvis en läkemedelstablett, genom en så kallad additiv process, vilket innebär att byggmaterialet läggs på successivt lager för lager. Syfte: Denna studie har ett tvådelat syfte, dels att presentera två 3D-printingstekniker, laserbaserade system (SLA) och smält deponeringsmodellering (FDM) som idag används för läkemedelsframställning samt göra en metodjämförelse, dels att ge exempel på samt beskriva några olika tabletter som framställts med hjälp av dessa tekniker. Metod:
APA, Harvard, Vancouver, ISO, and other styles
7

Gong, Hua. "3D Printing for Microfluidics." BYU ScholarsArchive, 2018. https://scholarsarchive.byu.edu/etd/7690.

Full text
Abstract:
This dissertation focuses on developing 3D printing as a fabrication method for microfluidic devices. Specifically, I concentrate on the 3D printing approach known as Digital Light Processing stereolithography (DLP-SLA) in which serially projected images are used to sequentially photopolymerize layers to build a microfluidic device. The motivation for this work is to explore a much faster alternative to cleanroom-based microfabrication that additionally offers the opportunity to densely integrate microfluidic elements in compact 3D layouts for dramatic device volume reduction. In the course of
APA, Harvard, Vancouver, ISO, and other styles
8

Sundaram, Subramanian Ph D. Massachusetts Institute of Technology. "3D-printing form and function." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/120416.

Full text
Abstract:
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2018.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 153-171).<br>Integrating diverse functions inside man-made parts with specific shapes, in a highly scalable manner, is the central challenge in manufacturing. Functional integration is typically achieved by assembling specialized parts, each independently made using carefully designed production techniques - for example, in assembly lines in the automotive industry. Externally assembling sp
APA, Harvard, Vancouver, ISO, and other styles
9

Jalwan, Hala, and Gregory Israel. "3D printing your supply chain." Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/92111.

Full text
Abstract:
Thesis: M. Eng. in Logistics, Massachusetts Institute of Technology, Engineering Systems Division, 2014.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 53-54).<br>Increasing the pace of product innovation in the consumer packaged goods industry can be achieved by implementing new technologies and streamlining processes. Our research is conducted primarily through extensive interviews with 3D printing experts and stakeholders in product development of a leading cosmetics manufacturer. We identify a framework where additive manufacturing technology such as
APA, Harvard, Vancouver, ISO, and other styles
10

Park, Allen S. M. (Allen S. ). Massachusetts Institute of Technology. "Machine-vision assisted 3D printing." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/113162.

Full text
Abstract:
Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2016.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 71-72).<br>I augmented a 3D printer with software for a 3D scanning system in order to incorporate feedback into the printing process. After calibration of the scanning system and the printer, the 3D scanning system is capab
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic '3D printng' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography