Academic literature on the topic '620.110 151'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '620.110 151.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "620.110 151"

1

Huuskonen, Arto. "Lihanautojen valkuaisruokinnan optimointi kokoviljasäilörehuruokinnalla." Suomen Maataloustieteellisen Seuran Tiedote, no. 30 (January 31, 2014): 1–7. http://dx.doi.org/10.33354/smst.75401.

Full text
Abstract:
Tutkimuksen tavoitteena oli selvittää valkuaislisän merkitystä maitorotuisten sonnien kokoviljasäilö-rehuruokinnalla. Koe-eläimet (36 kpl maitorotuisia sonneja) olivat ruokintakokeen alkaessa keskimäärin 217 vuorokauden ikäisiä. Sonnit jaettiin kokeen alussa elopainon ja rodun perusteella yhdeksään neljän eläimen blokkiin, joista ne edelleen arvottiin neljälle koeruokinnalle. Ryhmän 1 sonnit saivat vapaasti seosrehua, jossa oli kokoviljasäilörehua (60 % kuiva-aineesta) ja litistettyä ohraa (40 % kuiva-aineesta). Ryhmä ei saanut valkuaistäydennystä. Ryhmän 2 sonnit ruokittiin muutoin kuten ryhm
APA, Harvard, Vancouver, ISO, and other styles
2

Anzalone, Ruggero, Andrea Severino, Giuseppe D'Arrigo, et al. "3C-SiC Heteroepitaxy on (100), (111) and (110) Si Using Trichlorosilane (TCS) as the Silicon Precursor." Materials Science Forum 600-603 (September 2008): 243–46. http://dx.doi.org/10.4028/www.scientific.net/msf.600-603.243.

Full text
Abstract:
The aim of this work is to improve the heteroepitaxial growth process of 3C-SiC on Si substrates using Trichlorosilane (SiHCl3) as the silicon growth precursor. With this precursor it has been shown that it is possible to simultaneously increase the growth rate of the process and avoid the nucleation of silicon droplets in the gas phase. Growth experiments were conducted on three (3) Si substrate orientations in order to assess the impact of the Si substrate on the resulting 3C-SiC film. X-ray Diffraction (XRD), Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) analysis
APA, Harvard, Vancouver, ISO, and other styles
3

Sun, Shi-Gang, and Yan Lin. "Kinetics of isopropanol oxidation on Pt(111), Pt(110), Pt(100), Pt(610) and Pt(211) single crystal electrodes -." Electrochimica Acta 44, no. 6-7 (1998): 1153–62. http://dx.doi.org/10.1016/s0013-4686(98)00218-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ražnjević, Sergej, Sandra Drev, Andreas E. Bumberger та ін. "Structural Characterization of La0.6Sr0.4CoO3−δ Thin Films Grown on (100)-, (110)-, and (111)-Oriented La0.95Sr0.05Ga0.95Mg0.05O3−δ". Materials 17, № 8 (2024): 1802. http://dx.doi.org/10.3390/ma17081802.

Full text
Abstract:
In this study, a detailed structural characterization of epitaxial La0.6Sr0.4CoO3−δ (LSC) films grown in (100), (110), and (111) orientations was conducted. LSC is a model air electrode material in solid oxide fuel and electrolysis cells and understanding the correlation of bulk structure and catalytic activity is essential for the design of future electrode materials. Thin films were grown on single crystals of the perovskite material La0.95Sr0.05Ga0.95Mg0.05O3−δ cut in three different directions. This enabled an examination of structural details at the atomic scale for a realistic material c
APA, Harvard, Vancouver, ISO, and other styles
5

Raballand, Thierry. "Stirling Engine and absolute sealing." E3S Web of Conferences 313 (2021): 04004. http://dx.doi.org/10.1051/e3sconf/202131304004.

Full text
Abstract:
Referring to the sketches, the alternative rotation of shaft (101) allows for absolute sealing between the left side and the right side of seal (1020). A device for total sealing around a shaft in alternating rotation is characterized in that a seal (1020), the main part of the device, called a torsion disc, constitutes the material insulator and is fixed on a shaft (101) by means of two spacers (610) and (620), where the spacer (610) is held in position by the bearing (710) and the spacer (620), which clamps the seal (1020), is held in position by the bearing (720). Along the shaft (101) on b
APA, Harvard, Vancouver, ISO, and other styles
6

Guan, Tong, Sharon Esi Duoduwa, S. Balakumar, et al. "Evaluating strategies for global respiratory pandemic control at ports: a modelling study." BMJ Public Health 3, no. 1 (2025): e001782. https://doi.org/10.1136/bmjph-2024-001782.

Full text
Abstract:
BackgroundHeavy reliance on container shipping during the COVID-19 pandemic with lockdown implementation and air travel bans placed substantial pressure on shipping crews and ports. Long waiting times at ports, substantial economic losses and massive supply chain disruption of essential and medical goods were observed. To minimise this for future pandemic preparedness, we explore the use of quarantining and testing of crews preboarding instead of quarantining at port calls or during voyages.MethodsUsing a microsimulation model of 10 000 vessels and 300 000 crew, we examine the effectiveness of
APA, Harvard, Vancouver, ISO, and other styles
7

Tkach, E. V., Yu S. Filimonova, G. A. Shusev, and A. L. Shein. "Improvement of hydrophysical properties of modified heavy-duty concrete working in severe operating conditions." Building and Reconstruction 1, no. 1 (2025): 112–23. https://doi.org/10.33979/2073-7416-2025-117-1-101-111.

Full text
Abstract:
Requirements for concrete used in the manufacture of structures operating in harsh operating conditions are different from those for concrete used in industrial and civil construction. Such special requirements are primarily due to difficult operating conditions, in particular for tunnel structures. Under the influence of a whole range of aggressive environmental factors, this type of structure is partially or completely destroyed, which in turn reduces their design service life. Therefore, a necessary condition for increasing their durability is the creation of a modified dense concrete struc
APA, Harvard, Vancouver, ISO, and other styles
8

Hao, Hui Nan, Xu Wang та Fu He Wang. "First-Principles Study on the Clean and Nb Doped TiO2(110)γ-TiAl(111) Interfaces". Advanced Materials Research 602-604 (грудень 2012): 555–58. http://dx.doi.org/10.4028/www.scientific.net/amr.602-604.555.

Full text
Abstract:
In this paper, the structural stability, adhesion and chemical bonding of the TiO2 (110)/TiAl (111) interface are investigated by the first-principles calculations. We predict the maximum adhesion energy of 1.91J/m2 of the TiO2/TiAl interface. We also calculated the Nb doped interface, and found that the doped Nb atom prefers to replace the Ti atom at the second layer of TiAl slab. The atomic geometry and density of states are analyzed. The results show that the effect of doped Nb is localized and insignificant on the TiO2 (110)/TiAl(111) interface.
APA, Harvard, Vancouver, ISO, and other styles
9

Kadyrova, R. S. "Indicators and criteria for assessing the quality of public service delivery." ECONOMIC Series of the Bulletin of the L N Gumilyov ENU, no. 2 (January 27, 2023): 101–11. http://dx.doi.org/10.32523/2079-620x-2021-2-101-111.

Full text
Abstract:
The article describes the nature of public services and the problem of improving theirquality and accessibility for citizens. There have been studied the issues of the public authorities’services which comply the quality, timeliness and are primarily focused on the satisfaction ofcitizens in these services.Currently, the use of a citizen-centered approach in provision of services to measure the level ofsatisfaction of population with public services is one of the relevant research areas. Therefore, thework analyzes the issues of citizens’ public services satisfaction.The article describes the
APA, Harvard, Vancouver, ISO, and other styles
10

Zielinski, Marcin, Marc Portail, Thierry Chassagne, and Yvon Cordier. "Strain in 3C–SiC Heteroepitaxial Layers Grown on (100) and (111) Oriented Silicon Substrates." Materials Science Forum 600-603 (September 2008): 207–10. http://dx.doi.org/10.4028/www.scientific.net/msf.600-603.207.

Full text
Abstract:
We discuss the influence of the growth conditions (composition of the gaseous phase, growth duration, growth temperature) and wafer properties (orientation, miscut, thickness) on the residual strain of 3C-SiC films grown on silicon substrates. We show that the strain related effects are observed for both studied orientations however some of them (namely the creep effects) were up to now stated only for (100) oriented layers. We also point out the main difference in strain control between the (111) and (100) orientations.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "620.110 151"

1

Reiner, Carla [Verfasser]. "Lokalisation der potentiellen Radioimmunkonjugate 131 I-ch.MK1, 131 I-5A2, 111 In-ch.MK1 und 111 In-5A2 in SCID-Mäusen / Carla Reiner." Köln : Deutsche Zentralbibliothek für Medizin, 2011. http://d-nb.info/1010395432/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ebel, Christoph [Verfasser]. "Hochgeschwindigkeitsumflechten für die Fertigung von Faserverbundbauteilen / Christoph Sebastian Ebel." München : Verlag Dr. Hut, 2017. http://nbn-resolving.de/urn:nbn:de:101:1-2017100617464.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hajikhani, Aidin [Verfasser]. "Chemo-Mechanical Modeling of Polymeric Hydrogels / Aidin Hajikhani." Hannover : Gottfried Wilhelm Leibniz Universität, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021080502090608988915.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Götzinger, Robert [Verfasser]. "Entwicklung eines Blattbildners zur Erzeugung hochorientierter Papiere für das Bauen mit Papier sowie Komposite für den Leichtbau mit Papier / Robert Götzinger." Düren : Shaker, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021080805205505924119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Meißner, Tobias Marc [Verfasser]. "Neuartige Diffusionsschichten auf Cr-Basis zum Korrosionsschutz ferritisch-martensitischer Stähle im Kontakt mit partiell festen und flüssigen Salzen / Tobias Marc Meißner." Düren : Shaker, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021080805221420242711.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fromm, Helge Boris [Verfasser]. "Bewertung innovativer Instandhaltungsszenarien in den frühen Phasen des Innovationsprozesses in der Luftfahrt / Helge B Fromm." Aachen : Shaker, 2009. http://nbn-resolving.de/urn:nbn:de:101:1-2018061705435684834277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tkocz, Jasmin [Verfasser]. "Schnellfertigung von dünnwandigen Stabbauteilen aus Hochleistungsbeton mit gesteuerter Wärmebehandlung / Jasmin Tkocz." Düren : Shaker, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021080805232235484535.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rüppel, Annette [Verfasser]. "Untersuchung von Flüssigsilikonkautschuk-Polypropylen-Verbunden : Einflüsse der Lagerung und des Verarbeitungsprozesses auf die Haftungseigenschaften / Annette Rüppel." Kassel : kassel university press c/o Universität Kassel - Universitätsbibliothek, 2021. http://nbn-resolving.de/urn:nbn:de:101:1-2021083014413961688768.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Heuer, Sebastian [Verfasser]. "Massen- und Speziesfreisetzung bei der Pyrolyse in Oxyfuel-Atmosphäre / Sebastian Andre Heuer." Aachen : Shaker, 2019. http://nbn-resolving.de/urn:nbn:de:101:1-2019061606211197451717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Freitas, Rainhill Koffi [Verfasser]. "Lattice-Boltzmann Methods for Internal Flows / Rainhill K Freitas." Aachen : Shaker, 2008. http://nbn-resolving.de/urn:nbn:de:101:1-2018071506430404802375.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "620.110 151"

1

Fassbinder, Samuel Day, Anthony J. Nocella II, and Richard Kahn, eds. Greening the Academy. SensePublishers, 2012. http://dx.doi.org/10.1007/978-94-6209-101-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Гурбанська, А. І. Жанровий дискурс української повісті 60-80-х років XX ст. Видавництво КНУКіМ, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Гурбанська, А. І. Жанровий дискурс української повісті 60-80-х років XX ст. Видавництво КНУКіМ, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Гурбанська, А. І. Жанровий дискурс української повісті 60-80-х років XX ст. Видавництво КНУКіМ, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ніколаєнко, С. Освіта і наука. Законодавчі та методологічні основи. Політехніка, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Быргэу, М. М. Организация профилактики преступлений органами внутренних дел: концептуальные основы, практика, перспективы совершенствования (опыт Республики Молдова). Издательство Национального университета внутренних дел, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

1945-, Woodman A. J., and Sallust 86-34 B. C, eds. Catiline's War, the Jugurthine War, Histories. Penguin, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wendell, Batstone William, ed. Catiline's conspiracy: The Jugurthine War ; Histories. Oxford University Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Illinois. Illinois Clinical Laboratory Act: Ill. rev. stat., ch. 111 1/2, par. 621-101 et. seq.). Illinois clinical laboratory code : 77 Ill. adm. code 450) : effective July 1, 1989. Illinois Dept. of Public Health, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Milano, Andrea. Persona in teologia: Alle origini del significato di persona nel cristianesimo antico. Edizioni dehoniane, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "620.110 151"

1

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Sb-111 (Antimony)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_124.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Sb-115 (Antimony)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Te-111 (Tellurium)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_160.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Te-115 (Tellurium)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Cd-111 (Cadmium)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for I-111 (Iodine)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for I-115 (Iodine)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_197.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Cd-115 (Cadmium)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Xe-111 (Xenon)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_227.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sukhoruchkin, S. I., and Z. N. Soroko. "Excited Nuclear States for Xe-115 (Xenon)." In Nuclei with Z = 48 - 60. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30693-8_231.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "620.110 151"

1

Felton, Peter, John W. Oldfield, and Mohammed Ai-Maslamani. "Localised Corrosion Testing of CRA Materials in Elevated Temperature Sour Gas Environments." In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99593.

Full text
Abstract:
Abstract An exposure test programme has been undertaken to investigate the localised corrosion resistance of Alloys 28, 825, G3 and 625 in two simulated sour gas environments at 150°C. The chloride levels in these test environments, containing 30 psi (0.21 MPa) H2S and 101 psi (0.70 MPa) CO2, were 150 ppm and 30,000 ppm. The general corrosion rate of each material was found to be negligible in each test. Alloy 825 alone was susceptible to minor pitting and crevice initiation in the 150 ppm chloride environment. Increasing the chloride level to 30,000 ppm resulted in more severe crevice attack
APA, Harvard, Vancouver, ISO, and other styles
2

Köhler, M., and D. C. Agarwal. "Thermal Stability and Microstructural Changes of Some Ni-Cr-Mo Alloys as Detected by Corrosion Testing." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98313.

Full text
Abstract:
Abstract Wrought Ni-Cr-Mo alloys of the C-family show a sensitivity to intercrystalline attack especially after exposure in the temperature range of 650°C to 950°C. Nevertheless, microstructural changes due to precipitation of intermetallic phases can occur up to a temperature level of 1050°C and this can affect the localized corrosion resistance. Thermal stability of wrought Alloy C-276 is a lot lower in comparison to Alloy 59. Sensitized at 870°C for only 1 hour, Alloy C-276 fails in the ASTM-G 28 B test due to rapid intercrystalline penetration and pitting whereas Alloy 59 can be aged up to
APA, Harvard, Vancouver, ISO, and other styles
3

Peng, Z. F., L. S. Cai, F. F. Peng, Y. P. Hu, and F. Y. Chen. "Effects of Variation of Phase Chemistry on Multi-Region Stress Rupture Properties at 625°C for P92 Steel." In AM-EPRI 2010, edited by D. Gandy, J. Shingledecker, and R. Viswanathan. ASM International, 2010. http://dx.doi.org/10.31399/asm.cp.am-epri-2010p0667.

Full text
Abstract:
Abstract A study of P92 steel's creep-rupture behavior at 625°C revealed distinct relationships between phase chemistry and stress rupture properties across two regions: high-stress/short-term (180-150 MPa for 30-454 h) and low-stress/long-term (140-110 MPa for 2881-10,122 h). Using EPMA-EDS with Multiphase Separation Method (MPSM), researchers analyzed how M23C6 and Laves phase coarsening and chemistry (focusing on Cr, W, and Mo distribution) varied between these regions. This multi-region analysis established a framework for more efficient creep testing and improved extrapolation of short-te
APA, Harvard, Vancouver, ISO, and other styles
4

Chiang, Kuang-Tsan Kenneth, and Lietai Yang. "Aluminum and Nickel Alloy Multielectrode Sensors for Corrosion Monitoring at High Temperatures." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09440.

Full text
Abstract:
Abstract Existing coupled multielectrode array sensors (CMAS) with epoxy insulation are promising devices for application as online tools for corrosion monitoring. However, most of these devices have an upper operating temperature limit of approximately 70 °C. The sensor has an array of electrodes made from the metallic material of interest. The electrodes are electrically insulated from each other with a paint or mounting material (epoxy) but coupled by an external circuit and arranged so that a small area of the electrode contacts a corrosive environment. However, epoxy and paint are strongl
APA, Harvard, Vancouver, ISO, and other styles
5

Slusser, Joseph W., Sheldon W. Dean, and David M. Drummer. "Stress Corrosion Cracking of Cu Alloys and Ni Alloys." In CORROSION 1986. NACE International, 1986. https://doi.org/10.5006/c1986-86330.

Full text
Abstract:
Abstract Stress corrosion cracking (SCC) of copper alloys, particularly brasses, has been a serious industrial problem for many years and the subject of numerous studies. Generally, SCC of brass has been attributed to the presence of ammonia. Copper alloy CDA 220 brass (90 Cu-10 Zn) is considered fairly resistant to NH3 SCC because of its low Zn content. However, recently we have noted intergranular failures of CDA 220 brass rupture discs originating on the atmospheric side. Surface analysis of the failed discs showed the presence of N or S compounds. A series of SCC tests was conducted with r
APA, Harvard, Vancouver, ISO, and other styles
6

Zetlmeisl, Michael J. "A Laboratory and Field Investigation of Naphthenic Acid Corrosion Inhibition." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95334.

Full text
Abstract:
Abstract This paper presents results of a laboratory and field study of naphthenic acid corrosion and the development of an effective chemical inhibitor for this type of corrosive attack. In the laboratory corrosion test, which involved 20 hour weight loss measurements in high flash solvent with a total acid number (TAN) of 16 mg KOH/gm at a temperature of 600°F (316°C), blank corrosion rates averaged 140 to 150 mpy (3.56 to 3.81 mm/y). Inhibited rates averaged about 10 to 12 mpy (0.254 to 0.305 mm/y). The field test was carried out on a heavy vacuum gas oil (HVGO) stream at 550°F (288°C). Bla
APA, Harvard, Vancouver, ISO, and other styles
7

Stilwell, Philippa, Agnieszka Wojciechowska, Kate Oloughlin, et al. "621 Establishment of a national NHS 111 Paediatric Clinical Assessment Service (PCAS)." In Royal College of Paediatrics and Child Health, Abstracts of the RCPCH Conference, Liverpool, 28–30 June 2022. BMJ Publishing Group Ltd and Royal College of Paediatrics and Child Health, 2022. http://dx.doi.org/10.1136/archdischild-2022-rcpch.555.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kwong, James, Jeff Kalani, and Mathew Francis. "Emergency Design/Build By-Pass Tunneling Behind a 600-m High Cliff." In GeoTrans 2004. American Society of Civil Engineers, 2004. http://dx.doi.org/10.1061/40744(154)140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ceuca, S., A. Ferrara, S. Baietta, S. Campanari, P. Chiesa, and Nicola Zecca. "Benchmarking Combined Cycle Power Plant Designs Employing 9-12%Cr CSEF Steels in Environments Prone to Steam Oxidation." In AM-EPRI 2019, edited by J. Shingledecker and M. Takeyama. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.am-epri-2019p0990.

Full text
Abstract:
Abstract To stay competitive in today’s dynamic energy market, traditional thermal power plants must enhance efficiency, operate flexibly, and reduce greenhouse gas emissions. This creates challenges for material industries to provide solutions for harsh operating conditions and fluctuating loads. Higher efficiency demands steels with excellent steam oxidation resistance, favoring ferritic steels for cycling operation due to their limited thermal expansion. This paper presents a study modeling a combined cycle power plant using GE 9HA0.2 GT technology. The analysis compares different maximum l
APA, Harvard, Vancouver, ISO, and other styles
10

Galvin, DAJ, A. C. Meek, P. Pate, and C. N. McCollum. "DO PLATELET INHIBITORS INCREASE OPERATIVE BLOOD LOSS?" In XIth International Congress on Thrombosis and Haemostasis. Schattauer GmbH, 1987. http://dx.doi.org/10.1055/s-0038-1644225.

Full text
Abstract:
Although platelet inhibitory therapy improves arterial graft patency, surgeons are anxious that preoperative administration may increase operative bleeding. We investigated the effect of platelet inhibitors on blood loss during femoral artery replacement in dogs.Thirty greyhounds were randomised to receive placebo, a thromboxane antagonist GR32191 25mg (Glaxo Group Research) or aspirin 150mg (ASA) plus dipyridamole 50mg (DPM) twice daily starting 48 hours prior to implanting a 6cm length of 6mm PTFE in the femoral artery using standardised incision, mobilisation and anastomosis with 6.0 prolen
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "620.110 151"

1

Sorum, Matthew, Jordan Pruszenski, Kyle Joly, and Matthew Cameron. Moose (Alces alces) population survey in Yukon-Charley Rivers National Preserve, November 2022. National Park Service, 2023. http://dx.doi.org/10.36967/2301061.

Full text
Abstract:
Overall survey dates: November 6-19, 2022 (10 days of survey, 3 weather days) Total survey area: 3,096 mi2 (8,018 km2), 555 survey units Area surveyed: 614 mi2 (1,590 km2), 110 survey units Total moose observed: 183 (101 cows, 21 calves [2 set of twins], 61 bulls) Average search effort: 5.9 minutes/mi2 (3.5 minutes/km2) Population estimate: 738 moose (90% CI: 548-928; +/-26%); long-term average 848 moose Estimated density: 0.24 moose/mi2 (0.62 moose/km2); long-term average 0.27 moose/mi2 Estimated age/sex ratios: 19 calves:100 cows, 7 yearlings bulls:100 cows, 60 bulls:100 cows
APA, Harvard, Vancouver, ISO, and other styles
2

Xu, H., S. Fyfitch, P. Scott, M. Foucault, R. Kilian, and M. Winters. Materials Reliability Program Resistance to Primary Water Stress Corrosion Cracking of Alloys 690, 52, and 152 in Pressurized Water Reactors (MRP-111). Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/837205.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

ภัคภิญโญ, สมศักดิ์, จิโรจ ศศิปรียจันทร์ та รชฎ ตันติเลิศเจริญ. การทำลายเชื้อไวรัสเอเวียนอินฟลูเอนซาสายพันธุ์เอช 5 เอ็น 1 ที่แยกได้จากไก่ในประเทศไทยด้วยสารเคมีและวิธีทางกายภาพ : รายงานผลการวิจัย. จุฬาลงกรณ์มหาวิทยลัย, 2006. https://doi.org/10.58837/chula.res.2006.83.

Full text
Abstract:
การศึกษาครั้งนี้เป็นการศึกษาความคงทนของเชื้อไวรัสเอเวียนอินฟลูเอนซาสายพันธุ์ เอช 5 เอ็น 1 ที่แยกไก่จากไก่ในเขตจังหวัดภาคกลาง และภาคตะวันออกของประเทศไทย ระหว่างเดือนมกราคม ถึง กุมภาพันธ์ 2547 ซึ่งเป็นการระบาดครั้งแรก และ เดือนตุลาคม 2547 ซึ่งเป็นการระบาดครั้งที่ 2 ด้วยน้ำยาฆ่าเชื้อ วิธีทางกายภาพและความเป็นกรด-ด่าง ด้วยการเก็บตัวอย่าง อวัยวะ ปอด ลำไส้ ท่อลม และตับ จากไก่ป่วยที่สงสัย มาทำการแยกและพิสูจน์เชื้อไวรัสเอเวียนอินฟลูเอนซาสายพันธุ์ เอช 5 เอ็น 1 ด้วยวิธีการฉีดในไข่ไก่ฟักอายุ 11 วัน วิธีการจับกลุ่มตกตะกอนของเม็ดเลือดแดง วิธีการยับยั้งจับกลุ่มตกตะกอนของเม็ดเลือดแดง และวิธีการตรวจหาเชื้อไวรั
APA, Harvard, Vancouver, ISO, and other styles
4

เกียรติมานะกุล, สุนทร, อติชาต พรหมาสา та มาริษศักร์ กัลล์ประวิทธ์. การศึกษาเปรียบเทียบการวัดความดันเลือดแดงโดยทางตรงและทางอ้อมด้วยวิธี Oscillometric ในเสือขณะสลบ : รายงานผลการวิจัยฉบับสมบูรณ์. จุฬาลงกรณ์มหาวิทยาลัย, 2000. https://doi.org/10.58837/chula.res.2000.50.

Full text
Abstract:
การศึกษาเปรียบเทียบการวัดความดันเลือดแดงโดยตรงและโดยทางอ้อมด้วยวิธี oscillometric ในเสือขณะสลบ โดยใช้เสือโคร่งสุขภาพดีจำนวน 12 ตัว เป็นเพศผู้ 7 ตัว และเพศเมีย 5 ตัว อายุเฉลี่ย 4+-1.39 เดือน น้ำหนักเฉลี่ย 18+-10.65 กก. วางยาสลบโดยใช้ ketamine, xylazine และ atropine sulphate รวมเข็มเดียวกันบริหารเข้ากล้ามเนื้อ จดบันทึกอัตราการเต้นของหัวใจ ความดันเลือดแดง systolic, diastolic และความดันเลือดแดงเฉลี่ย โดยวัดความดันเลือดแดงโดยตรงที่บริเวณข้อเท้าขาหลังซ้าย และวัดความดันเลือดแดงโดยทางอ้อมด้วยวิธี oscillometric ที่ข้อเท้าขาหลังขวา และที่โคนหาง ผลการศึกษาพบว่า เสือขณะสลบมีอัตราการเต้นของหัวใจ 109+-16.27
APA, Harvard, Vancouver, ISO, and other styles
5

สุมิตร, ธัชชัย, วีระชัย บัญชรเทวกุล, ศิริวัฒนา บัญชรเทวกุล, สุวิทย์ ปุณณชัยยะ та นเรศร์ จันทน์ขาว. การพัฒนาวัสดุจุดหลอมตัวต่ำสำหรับกำบังรังสีเอกซ์และรังสีแกมมา. จุฬาลงกรณ์มหาวิทยาลัย, 1993. https://doi.org/10.58837/chula.res.1993.21.

Full text
Abstract:
ผลการศึกษาเกี่ยวกับการพัฒนาวัสดุจุดหลอมตัวต่ำสำหรับกำบังรังสีเอ็กซ์และรังสีแกมมาพบว่า โลหะผสมเทอนารีระบบมิสมัท-ตะกั่ว-ดีบุก บิสมัท-แคดเมียม-ตะกั่ว และบิสมัท-แคดเมียม-ดีบุก เหมาะกับการหล่อโลหะในช่วงอุณหภูมิ 120-175 องศาเซลเซียส ในขณะที่โลหะผสมควอเทอนารีระบบบิสมัท-ตะกั่ว-ดีบุก-แคดเมียม เหมาะกับการหล่อโลหะในช่วงอุณหภูมิ 95-120 องศาเซลเซียส โครงสร้างของโลหะผสมเทอนารีพบว่ามีเนื้อแน่น สามารถประเมินความหนาแน่นจากการคำนวณในขณะที่โลหะผสมควอเทอนารีจะมีเฟสของสารประกอบระหว่างโลหะซึ่งมีความหนาแน่นต่ำปรากฏ ทำให้ไม่สามารถประเมินความหนาแน่นโดยการคำนวณ ความแข็งแรงของโลหะผสมทั้งสองระบบมีค่าประมาณ 2-3 เท่าของโลห
APA, Harvard, Vancouver, ISO, and other styles
6

Reiter, Patrick, Hannes Poier, Christian Holter, et al. Business Models of Solar Thermal and Hybrid Technologies. IEA SHC Task 55, 2019. http://dx.doi.org/10.18777/ieashc-task55-2019-0002.

Full text
Abstract:
District Heating required annually 600 TWh in the European Union and represents more than 10% of the EUs heat demand. Fossil fuels are the major source for heat production. Approximately 5000 district heating grids in the EU are operated by burning fossil fuels valued at € 18 billion (600 TWh) and emitting more than 150 million tons of CO2 emissions every year.
APA, Harvard, Vancouver, ISO, and other styles
7

สุพุทธิธาดา, อารีรัตน์, เสก อักษรานุเคราะห์, ศศิวิมล อักษรถึง та อธิการ เทพบุตร์. ประสิทธิผลของ double TENS ในโรคข้อเข่าเสื่อมที่มีความรุนแรงน้อยถึงปานกลาง. จุฬาลงกรณ์มหาวิทยาลัย, 2007. https://doi.org/10.58837/chula.res.2007.29.

Full text
Abstract:
วัตถุประสงค์: เพื่อศึกษาประสิทธิผลของ double TENS เปรียบเทียบกับการรับประทานยา Diclofenac การใช้ single TENS และultrasound ในด้านอาการปวดและความสามารถในการทำกิจกรรม ในผู้ป่วยโรคข้อเข่าเสื่อมที่มีความรุนแรงน้อยถึงปานกลาง รูปแบบการวิจัย: การศึกษาเชิงการทดลองแบบสุ่ม มีกลุ่มควบคุมและผู้ประเมินไม่ทราบว่าผู้ป่วยอยู่ในกลุ่มใด (Experimental randomized single blinded controlled trial) วิธีการศึกษา: สุ่มเลือกผู้ป่วยโรคข้อเข่าเสื่อมออกเป็น4 กลุ่ม ดังนี้ กลุ่ม 1 ได้รับการรักษาด้วย double TENS ความถี่ 50 และ 150 Hz นาน 10 นาที โดยวางให้จุดตัดของกระแสไฟฟ้าเป็นตำแหน่งที่ปวดที่สุด กลุ่ม 2 ได้รับการรักษาด้วย d
APA, Harvard, Vancouver, ISO, and other styles
8

ตัณฑะพานิชกุล, วิวัฒน์. การผลิตบรรจุภัณฑ์จากชานอ้อย : รายงานวิจัยฉบับสมบูรณ์. จุฬาลงกรณ์มหาวิทยาลัย, 2003. https://doi.org/10.58837/chula.res.2003.52.

Full text
Abstract:
ชานอ้อยเป็นผลิตภัณฑ์ที่เหลือใช้จากอุตสาหกรรมน้ำตาล ซึ่งจะใช้ประโยชน์เป็นวัตถุดิบในการผลิตบรรจุภัณฑ์ที่สามารถย่อยสลายในธรรมชาติได้ ในงานวิจัยนี้ได้นำชานอ้อยมาใช้เป็นวัตถุดิบในการผลิตบรรจุภัณฑ์ ในงานวิจัยได้ให้ความสนใจกระบวนการผลิตใหม่ๆ ของการผลิตบรรจุภัณฑ์จากชานอ้อยซึ่งเส้นใยของชานอ้อยและพลาสติไซเซอร์มีคุณสมบัติที่ให้ความแข็งแรงและป้องกันน้ำได้ดี นอกจากคุณสมบัตินี้แล้วยังมีคุณสมบัติอื่นๆ อีกนั้นก็คือ สามารถย่อยสลายตามธรรมชาติและยังสามารถป้องกันการซึมผ่านของออกซิเจนได้ ซึ่งจะใช้เป็นส่วนประกอบที่สำคัญในการผลิตบรรจุภัณฑ์เพื่อยืดอายุผลไม้ จากการทดลองเพื่อหากระบวนการและอัตราส่วนที่ดีที่สุดเพื่อใช้ใน
APA, Harvard, Vancouver, ISO, and other styles
9

ตัณฑะพานิชกุล, วิวัฒน์. การผลิตซีโอไลต์ชนิด ZSM-5 ละเอียดพิเศษจากกากของเสีย : รายงานวิจัยฉบับสมบูรณ์. จุฬาลงกรณ์มหาวิทยาลัย, 2004. https://doi.org/10.58837/chula.res.2004.57.

Full text
Abstract:
สังเคราะห์ซีโอไลต์ชนิด ZSM-5 โดยใช้เถ้าแกลบเป็นแหล่งของซิลิกาเพื่อศึกษาตัวแปรที่มีผลต่อขนาดของซีโอไลต์ชนิด ZSM-5 ในขั้นแรกเป็นการเตรียมเถ้าแกลบ โดยการนำเถ้าแกลบไปต้มกับกรดไฮโดรคลอริกความเข้มข้น 1 โมลาร์ หลังจากนั้นนำแกลบไปเผาด้วยเตาภายใต้บรรยากาศออกซิเจนที่อุณหภูมิ 700 องศาเซลเซียส เป็นระยะเวลา 60 นาที ได้เถ้าแกลบที่มีองค์ประกอบเป็นซิลิกาบริสุทธิ์ 99.7% โดยน้ำหนัก จากนั้นหา สภาวะที่เหมาะสมในการสังเคราะห์ซีโอไลต์ชนิด ZSM-5 โดยสภาวะที่เหมาะสมในการสังเคราะห์คือ อัตราส่วนโดยโมลของซิลิกาต่ออะลูมินาเท่ากับ 40 และค่า pH เท่ากับ 11 เมื่อใช้อัตราส่วนโดยโมลของเตตระโพรพิลแอมโมเนียมโบรไมด์ต่ออะลูมินาเท่าก
APA, Harvard, Vancouver, ISO, and other styles
10

เร่งพิพัฒน์, ศิริรัตน์. การทำบริสุทธิ์สารต่อต้านจุลชีพจาก Bacillus S11 : รายงานผลการวิจัย. จุฬาลงกรณ์มหาวิทยาลัย, 1999. https://doi.org/10.58837/chula.res.1999.45.

Full text
Abstract:
Bacillus sp. S11 ที่ใช้เป็นโพรไบโอติกในการเพาะเลี้ยงกุ้งกุลาดำสามารถสร้างสารต้านจุลชีพได้ในระยะ log phase ของการเจริญ ภาวะการเลี้ยงที่เหมาะสมต่อการสร้างสารนี้คือ การใช้อาหารเลี้ยงเชื้อที่ประกอบด้วย สารสกัดจากยีสต์ 2% (น้ำหนัก/ปริมาตร) ไดโพแทสเซียมฟอสเฟต 0.25% (น้ำหนัก/ปริมาตร) pH ของอาหารเลี้ยงเชื้อเริ่มต้นที่ 7.0 ใช้ปริมาณหัวเชื้อตั้งต้นที่ 2.0% (ปริมาตร/ปริมาตร) อุณหภูมิในการเพาะเลี้ยง 40 องศาเซลเซียส บนเครื่องเขย่า 200 รอบต่อนาที สารต้านจุลชีพที่ได้ถูกนำให้บริสุทธิ์ตามขั้นตอนดังนี้ ตกตะกอนด้วย 0-30% แอมโมเนียม ซัลเฟต ผ่านคอลัมน์ Sephadex G-50 และผ่าน DEAE-Sephadex ให้ค่า specific activity เ
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!