Log in

Relevant bibliographies by topics / 7075 Al. matrix

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic '7075 Al. matrix'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic '7075 Al. matrix.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "7075 Al. matrix"

1

Xu, Ping, Feng Wang, Hui Min Liu, and Xiang Dong Liu. "Microstructure and Wear Properties of TiC/7075 Composites by In Situ Reaction Liquidus Curve Casting Method." Materials Science Forum 675-677 (February 2011): 1121–24. http://dx.doi.org/10.4028/www.scientific.net/msf.675-677.1121.

Full text

Abstract:

7075 matrix alloy was fabricated by in-situ reaction liquidus curve casting method, and its as-cast microstructure was analyzed, the wear properties of these composites and matrix alloy were studied under the different conditions. The results show that the wear resistance of TiC/7075 composites is superior to 7075 matrix alloy in the same conditions (with same load or rotating velocity). Because of introduction of particle reinforcements, the wear resistance of the composite is enhanced by 1.5～4 times than that of its matrix. In addition, the wear mass loss of TiC/7075 composites increases alm

APA, Harvard, Vancouver, ISO, and other styles

2

Gao, Qian, Bin Yang, Guisheng Gan, et al. "Microstructure and Wear Resistance of TiB2/7075 Composites Produced via Rheocasting." Metals 10, no. 8 (2020): 1068. http://dx.doi.org/10.3390/met10081068.

Full text

Abstract:

In this study, TiB2/7075 aluminum matrix composites were prepared via in situ synthesis. It was found that TiB2 particles are mainly quadrate. Large TiB2 particles (1–2 μm) agglomerate at grain boundaries, but most of the particles are on the submicron scale. Adding 4.5 wt.% TiB2 particles effectively optimizes α-Al grains in the 7075 aluminum alloy. By combining in situ reinforcing particles with the self-stirring effect of a serpentuator, rheocasting of the 7075 aluminum alloy was achieved in a simple and economical way. The average grain size of the specimen after rheocasting and heat treat

APA, Harvard, Vancouver, ISO, and other styles

3

Gan, Gui Sheng, Da Quan Xia, Xin Liu, et al. "Microstructure Evolution of TiB₂/7075 Composites in Semi-Solid State near Liquids within Holding Time." Solid State Phenomena 285 (January 2019): 127–32. http://dx.doi.org/10.4028/www.scientific.net/ssp.285.127.

Full text

Abstract:

Novel reactive technique has been employed in synthesis of 7075 Al matrix composites, and effect of TiB2 particles on sedimentation and microstructure of 7075 Al Alloy in near liquidus was investigated. Researchers have shown that 4.5%TiB2/7075 composites had the smallest grains and the minimum liquidus and solidus temperatures in 7075 Al matrix composites. 4.5%TiB2/7075 composites holding for 21 hours appeared stratification phenomenon, the globular grains were 61μm and 214μm, 250μm and 283μm with the increase of holding time respectively. The microstructures evolution of TiB2 /7075 composite

APA, Harvard, Vancouver, ISO, and other styles

4

Karunanithi, R., K. S. Ghosh, and Supriya Bera. "Synthesis and Characterization of TiO₂ Dispersed Al 7075 Micro- and Nanocomposite." Advanced Materials Research 984-985 (July 2014): 313–18. http://dx.doi.org/10.4028/www.scientific.net/amr.984-985.313.

Full text

Abstract:

Micro-TiO2and nanoTiO2dispersed Al 7075 composites have been synthesized by mechanical milling followed by cold compaction and sintering. The compressibility of the nanocomposites is less than the micro composite, but sintered density of the nanocomposite is higher that the microcomposite. Nanocomposite shows better hardness than microcomposite. However, both types of composites do not show artificial ageing characteristics like unreinforced Al 7075 alloy. Microstructural analysis through XRD and TEM reveals that the formation of MgTiO3and ZnO near TiO2-Al 7075 matrix interface causes depletio

APA, Harvard, Vancouver, ISO, and other styles

5

Lal, Shyam, Sudhir Kumar, and Zahid A. Khan. "Microstructure evaluation, thermal and mechanical characterization of hybrid metal matrix composite." Science and Engineering of Composite Materials 25, no. 6 (2018): 1187–96. http://dx.doi.org/10.1515/secm-2017-0210.

Full text

Abstract:

AbstractIn this paper, an inert gas assisted electromagnetic stir casting process is adapted for manufacturing a cast hybrid metal matrix composite (MMC) using Al2O3 and SiC particulates as a hard phase reinforcement in Al 7075 alloy metal matrix. Four different samples containing 5, 10, 15 and 20 wt% of Al2O3 and SiC with Al 7075 alloy composites were fabricated. The characterizations for all the samples were carried out through optical microstructure, scanning electron microscopy (SEM) fractograph, X-ray diffraction (XRD) analysis, differential thermal analysis (DTA) analysis and mechanical

APA, Harvard, Vancouver, ISO, and other styles

6

Ramkumar, K. R., Habtamu Bekele, and S. Sivasankaran. "Experimental Investigation on Mechanical and Turning Behavior of Al 7075/x% wt. TiB2-1% Gr In Situ Hybrid Composite." Advances in Materials Science and Engineering 2015 (2015): 1–14. http://dx.doi.org/10.1155/2015/727141.

Full text

Abstract:

The present research work involves the study of AA 7075-TiB2-Gr in situ composite through stir casting route. This in situ method involves formation of reinforcements within the matrix by the chemical reaction of two or more compounds which also produces some changes in the matrix material within the vicinity. Titanium Diboride (TiB2) and graphite were the reinforcement in a matrix of AA 7075 alloy. The composite was prepared with the formation of the reinforcement inside the molten matrix by adding salts of Potassium Tetrafluoroborate (KBF4) and Potassium Hexafluorotitanate (K2TiF6). The samp

APA, Harvard, Vancouver, ISO, and other styles

7

Gan, Gui Sheng, Qian Gao, Bin Yang, and Shu De Gan. "Effect Sedimentation of TiB₂ Particles on the Microstructure of 7075 Al Alloy." Advanced Materials Research 904 (March 2014): 50–53. http://dx.doi.org/10.4028/www.scientific.net/amr.904.50.

Full text

Abstract:

Novel reactive technique has been employed in synthesis of 7075 Al matrix composites and sedimentation of TiB2 particles were studied by viscosity test. Researches have shown that most TiB2 particles reached about 900~1400nm in 3%TiB2/7075 composites, and about 600~800nm when the content is up to 6% TiB2 particles. The grain size of the 3%TiB2/7075 composites became the rosette from dendrites in 7075 Al alloy, but α-Al became the dendrite after added 6%TiB2 in 7075 Al alloy. After viscosity test, nearly spherical grains and gross dendrites can be found above and below the boundary layer respec

APA, Harvard, Vancouver, ISO, and other styles

8

Ming, Hu, Ren Xiaoxue, Sun Jianbo, Zhang Yunlong, Teng Chunfeng, and Qiao Guang. "Fabrication and microstructural analysis of 3A21/7075 aluminum alloy cladding material based on impact jet solid–liquid compound casting." Composites and Advanced Materials 30 (January 1, 2021): 2633366X2093448. http://dx.doi.org/10.1177/2633366x20934485.

Full text

Abstract:

To solve thickness problem for high-strength aluminum alloy used as plastic mold materials and eliminate oxide film on the surface of aluminum alloy, a new compound casting, namely impact jet solid–liquid compound casting, was developed to fabricate 3A21/7075 aluminum alloy cladding material. Then, optical microscope (OM), electron-backscattered diffraction (EBSD) technique, and transmission electron microscope (TEM) together with energy-dispersive spectrometer (EDS) were used to analyze microstructure of 3A21/7075 aluminum alloy cladding material. The OM and EBSD results showed that the 3A21/

APA, Harvard, Vancouver, ISO, and other styles

9

Pradeep Devaneyan, S., R. Ganesh, and T. Senthilvelan. "On the Mechanical Properties of Hybrid Aluminium 7075 Matrix Composite Material Reinforced with SiC and TiC Produced by Powder Metallurgy Method." Indian Journal of Materials Science 2017 (January 23, 2017): 1–6. http://dx.doi.org/10.1155/2017/3067257.

Full text

Abstract:

Metal matrix composites are widely used in components of various components of industrial equipment because of their superior material properties like high stiffness to weight ratio and high impact strength and fracture toughness while compared to the conventional material. Due to the concepts of high strength to low weight ratio, Al 7075 was extensively applied in aircraft engine and wings. Even if Al 7075 has higher hardness, higher strength, excellent wear resistance, and high-temperature corrosion protection, it is in need of further enhancement of properties for increasing its applicabili

APA, Harvard, Vancouver, ISO, and other styles

10

Suryakumari, T. S. A., S. Ranganathan, and P. Shankar. "Study on Mechanical Properties of Al 7075 Hybrid Metal Matrix Composites." Applied Mechanics and Materials 813-814 (November 2015): 230–34. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.230.

Full text

Abstract:

The present investigation involves studying the mechanical properties of the fabricated aluminium 7075 hybrid metal matrix composites reinforced with various weight % of SiC and Al2 O3 particulates by stir casting method. The Al 7075 hybrid metal matrix composites specimen were fabricated using L9 orthogonal array. The mechanical properties like Brinell Harness (BHN), Rockwell Hardness (HRC) and impact loads were experimented. The mechanical properties like hardness and impact loads have improved with the increase in weight percentage of SiC and Al2O3 particulates in the hybrid aluminium matri

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "7075 Al. matrix"

1

Armstrong, William D. "Thermal cycling damage accumulation processes in an advanced metal matrix composite /." Thesis, Connect to this title online; UW restricted, 1991. http://hdl.handle.net/1773/7075.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yilmaz, Hamdi Sencer. "Characterization Of Silicon Carbide Particulate Reinforced Squeeze Cast Aluminum 7075 Matrix Composite." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/3/12605261/index.pdf.

Full text

Abstract:

The aim of this study is to investigate the mechanical behavior and its relation with processing and microstructure of the silicon carbide particulate (SiCp) reinforced aluminum matrix composite. Aluminum 7075 alloy is chosen as matrix alloy, in which zinc is the main alloying element. Four different additions of SiCp were used and the weight fractions were 10%, 15%, 20% and 30%. Composites were processed by with squeeze casting and the applied pressure during casting was 80 MPa. The mould is specially designed to produce both specimens ready for tensile and three point bending tests. Both a

APA, Harvard, Vancouver, ISO, and other styles

3

Ren, Zheng Materials Science &amp Engineering Faculty of Science UNSW. "Mechanical properties of 7075 aluminium matrix composites reinforced by nanometric silicon carbide particulates." Awarded by:University of New South Wales, 2007. http://handle.unsw.edu.au/1959.4/34742.

Full text

Abstract:

Aluminium composites reinforced by particles have received considerable attention because of their superior mechanical properties over monolithic aluminum matrix. Over the last ten years, nanocomposites with nano-sized reinforcements have become a revolutionary progress for composites because they have different strengthening mechanisms as compared to that in composites with micro-sized reinforcements. Consequently novel properties can be expected from the nanometric particulate reinforced composites. The aim of this project was to fabricate SiC (50nm)/7075 aluminium composites via a modified

APA, Harvard, Vancouver, ISO, and other styles

4

Vasconcelos, de Araújo Kalasas. "A Álgebra de Gauss de uma Álgebra Monomial." Universidade Federal de Pernambuco, 2007. https://repositorio.ufpe.br/handle/123456789/7075.

Full text

Abstract:

Made available in DSpace on 2014-06-12T18:28:47Z (GMT). No. of bitstreams: 2 arquivo646_1.pdf: 442286 bytes, checksum: 8143ec3c3a5b067f3662ed8fb12ba045 (MD5) license.txt: 1748 bytes, checksum: 8a4605be74aa9ea9d79846c1fba20a33 (MD5) Previous issue date: 2007<br>Universidade Federal de Sergipe<br>A álgebra de Gauss associada à k-subálgebra de um anel polinomial k[t0; : : : ; td] gerado por um número finito de formas de mesmo grau corresponde ao anel de coordenadas homogêneo da imagem de Gauss de uma variedade projetiva uniracional sobre k. Focaremos o caso onde os geradores são monômios. Po

APA, Harvard, Vancouver, ISO, and other styles

5

Carlson, Russel O. "Tournament Matrices an Overview." DigitalCommons@USU, 2002. https://digitalcommons.usu.edu/etd/7070.

Full text

Abstract:

The results of a round robin tournament can be represented as a matrix of zeros and ones, by ordering the players and placing a one in the (i,j) position if player i beat player j, and zeros otherwise. These matrices, called tournament matrices, can be represented by graphs, called tournament graphs. They have been the subject of much research and study, yet there have been few attempts to give a wide exposition on the subject. Those that have been done tend to focus on the graph theoretical aspects of tournaments. S. Ree and Y. Koh did write a brief survey from the matrix viewpoint in 1998, b

APA, Harvard, Vancouver, ISO, and other styles

6

Rousseau, Marjolaine. "Assessment of a novel matrix as a delivery device for antimicrobials and bone morphogenetic protein-2." Thesis, Kansas State University, 2011. http://hdl.handle.net/2097/7072.

Full text

Abstract:

Master of Science<br>Department of Clinical Sciences<br>David E. Anderson<br>Drug delivery systems for time release of recombinant human bone morphogenetic protein-2 (rhBMP-2) and antibiotics in orthopedic surgeries continue to be developed. Recently, a biodegradable novel polymeric matrix has been developed for this purpose. We hypothesized that impregnation of the matrix with rhBMP-2 would enhance bone healing. The objectives of the study were to characterize elution of rhBMP-2 and two antimicrobials (tigecycline, tobramycin) from the matrix, and bone response to the matrix in the presence o

APA, Harvard, Vancouver, ISO, and other styles

7

Brinzer, Robert Adolf. "Drosophila, metabolomics and insecticide action." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/7072/.

Full text

Abstract:

The growing problem of insecticide resistance is jeopardising current pest control strategies and current insecticide development pipelines are failing to provide new alternatives quickly enough. Metabolomics offers a potential solution to the bottleneck in insecticide target discovery. As a proof of concept, metabolomics data for permethrin exposed Drosophila melanogaster was analysed and interpreted. Changes in the metabolism of amino acids, glycogen, glycolysis, energy, nitrogen, NAD+, purine, pyrimidine, lipids and carnitine were observed along with markers for acidosis, ammonia stress, ox

APA, Harvard, Vancouver, ISO, and other styles

8

Maraschin, Thuany Garcia. "Prepara??o de ?xido de grafeno e ?xido de grafeno reduzido e dispers?o em matriz polim?rica biodegrad?vel." Pontif?cia Universidade Cat?lica do Rio Grande do Sul, 2016. http://tede2.pucrs.br/tede2/handle/tede/7065.

Full text

Abstract:

Submitted by Setor de Tratamento da Informa??o - BC/PUCRS (tede2@pucrs.br) on 2016-11-29T15:45:36Z No. of bitstreams: 1 DIS_THUANY_GARCIA_MARASCHIN_COMPLETO.pdf: 3644963 bytes, checksum: fa378de0f5287d6d9eeabe72fda2aa16 (MD5)<br>Made available in DSpace on 2016-11-29T15:45:36Z (GMT). No. of bitstreams: 1 DIS_THUANY_GARCIA_MARASCHIN_COMPLETO.pdf: 3644963 bytes, checksum: fa378de0f5287d6d9eeabe72fda2aa16 (MD5) Previous issue date: 2016-08-26<br>Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior - CAPES<br>The development of methodologies able to prepare new materials, using graphene i

APA, Harvard, Vancouver, ISO, and other styles

9

Lanfer, Babette. "Aligned Fibrillar Collagen Matrices for Tissue Engineering." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-33373.

Full text

Abstract:

The desire for repair of tissue defects and injury is the major need prompting research into tissue engineering. Engineering of anisotropic tissues requires production of ordered substrates that orient cells preferentially and support cell viability and differentiation. Towards this goal, this thesis investigated methodologies to align extracellular matrix structures in vitro to guide stem/progenitor cell behaviour for tissue regeneration. Aligned collagen fibrils were deposited on planar substrates from collagen solutions streaming through a microfluidic channel system. Collagen solution conc

APA, Harvard, Vancouver, ISO, and other styles

10

Herklotz, Manuela. "Substratinduzierte Differenzierung von Endothelzellen." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2008. http://nbn-resolving.de/urn:nbn:de:bsz:14-ds-1219131891456-62721.

Full text

Abstract:

Der Erfolg neuer Strategien in der Regenerativen Medizin und im Tissue Engineering hängt maßgeblich von einem gut entwickeltem vaskulären Netzwerk ab, welches die auf den Implantaten wachsenden Zellen und Gewebe versorgen. Oberflächeneigenschaften der Implantate sowie die Präsentation verschiedener Liganden für extrazelluläre Matrixproteine spielen bei der Besiedlung der Implantate, als auch bei der Bildung versorgender Blutgefäße durch die Endothelzellen eine wesentliche Rolle. In dieser Arbeit konnte durch Variation der Anbindungsstärke (kovalent oder physisorptiv) des extrazellulären Matrix

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "7075 Al. matrix"

1

Olshevsky, Vadim, and Eugene Tyrtyshnikov. Matrix Methods: Theory, Algorithms and Applications. WORLD SCIENTIFIC, 2010. http://dx.doi.org/10.1142/7070.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "7075 Al. matrix"

1

Prasanna Nagasai, B., S. Srikanth, and J. A. Ranga Babu. "Mechanical Properties of AA 7075-Nano ZrO2 Reinforced Matrix Composites." In Advances in Applied Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1201-8_98.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Balaji, R., J. V. Muruga Lal Jeyan, A. Basithrahman, Talasila Estheru Rani, and S. Abirami. "Comparative Analysis on Mechanical Properties of Al 6061 and Al 7075 Cross Matrix Composites." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5151-2_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Durga Prasada Rao, V., V. Navya Geethika, and P. S. Krishnaveni. "Multi-objective Optimization of Mechanical Properties of Aluminium 7075-Based Hybrid Metal Matrix Composite Using Genetic Algorithm." In Advances in 3D Printing & Additive Manufacturing Technologies. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0812-2_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Praveen, D. Vijay, D. Ranga Raju, and M. V. Jagannadha Raju. "Investigation on Wear Properties of Nickel-Coated Al2O3P-Reinforced AA-7075 Metal Matrix Composites Using Grey Relational Analysis." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4488-0_69.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Mondal, Goutam, Pradipta Kumar Rout, Gourab Mohanty, and B. Surekha. "Characterization and Comparison of Functionally Graded Al/Mg and Al/Al 7075 Metal Matrix Composites Manufactured by Die Casting." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6374-0_23.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mishra, Atmanand, Dinesh Kumar Kasdekar, and Sharad Agrawal. "Empirical Modeling and Multi-objective Optimization of 7075 Metal Matrix Composites on Machining of Computerized Numerical Control Wire Electrical Discharge Machining Process." In Algorithms for Intelligent Systems. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0426-6_22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bharath, K., and A. Bovas Herbert Bejaxhin. "Comparative Investigation of Surface Roughness Reduction in CNC Milling of Novel Hybrid Al 7075-Mg-SiC-FA and Al 6061-SiC-Mg Metal Matrix Composites." In Advances in Additive Manufacturing Technologies. CRC Press, 2024. http://dx.doi.org/10.1201/9781003545774-56.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Stenzenberger, H. D. "Development of Thermosetting Polyimide Matrix Resins." In Carbon Fibres and Their Composites. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-70725-4_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mallesh, G., R. Pavankumar, V. G. Pradeep Kumar, and L. Laxman Naik. "Synthesis and Characterization of Al 7072-Al2O3 Metal Matrix Composites." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4745-4_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stenzenberger, H. D. "Thermosetting Matrix Systems and Their Influence for Carbon Fibre Reinforcement." In Carbon Fibres and Their Composites. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-70725-4_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "7075 Al. matrix"

1

Mansfeld, F., S. Lin, S. Kim, and H. Shih. "Corrosion Protection of Al Alloys and Al-Based Metal Matrix Composites by Chemical Passivation." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88380.

Full text

Abstract:

Abstract Chemical passivation by immersion of Al alloys and Al 6061/SiC and Al 6061/ graphite metal matrix composites in a CeCl3 solution produces very corrosion resistant surfaces. Al 6061 and Al 7075-T6 which had been immersed in 1000 ppm CeCl3 for one week did not suffer from pitting corrosion during immersion in aerated 0.5 N NaCl for three weeks. For Al 7075-T73 some improvement of the corrosion resistance was also achieved, but to a much lesser extent. Chemical passivation in CeCl3 was also successful for Al/SiC and Al/ graphite. A comparison with the improvements of the corrosion resist

APA, Harvard, Vancouver, ISO, and other styles

2

Mansfeld, F., Y. Wang, H. Xiao, and H. Shih. "Monitoring of Localized Corrosion with Electrochemical Impedance Spectroscopy (EIS)." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92229.

Full text

Abstract:

Abstract Experimental evidence collected by the authors shows that the growth of pits on Al alloys and Al-based metal matrix composites can be monitored by EIS. Characteristic changes occur in the impedance spectra when pits have exceeded a certain minimum depth. The phase angle is especially sensitive to the initiation of pits. A model for the impedance of pitted Al surfaces has been developed. The procedure for fitting experimental EIS-data to this model has been illustrated. The growth of pits and its time dependence can be followed based on the values of the polarization resistance R°pit o

APA, Harvard, Vancouver, ISO, and other styles

3

Arvin, Charles L., Juan Jiang, Albert E. Miller, Kunigahalli L. Vasanth, and Gautam Banerjee. "Corrosion Inhibition of Al and Al Alloys with Permanganate Solutions." In CORROSION 2001. NACE International, 2001. https://doi.org/10.5006/c2001-01548.

Full text

Abstract:

Abstract Two green inhibitor formulations have been developed for treating aluminum alloys 2024-T3 and 6061-T6. The formulation consists of the oxoanion MnO4− with a catalytic amount of either Cr(VI) (50μg/L present as dichromate) or acetic acid. Both formulations are considered green since they contain Cr(VI) concentrations that are below the EPA safe limit for drinking water that is 100μg/L. The inhibitor formulations have been previously tested on anodized aluminum alloy coupons followed by sealing in a bath containing the inhibitor formulation. The combination of anodizing and sealing last

APA, Harvard, Vancouver, ISO, and other styles

4

Devan, P. D., V. R. Muruganantham, and G. Rajkumar. "Prediction of mechanical characteristics of aluminium 7075 metal matrix composites." In THE 8TH ANNUAL INTERNATIONAL SEMINAR ON TRENDS IN SCIENCE AND SCIENCE EDUCATION (AISTSSE) 2021. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0108115.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Meydanoglu, O., B. Jodoin, and E. Sabri Kayali. "Microstructure and Mechanical Properties of 7075 Al Matrix SiC Reinforced Composite Coatings Produced by the Cold Gas Dynamic Spraying Process." In ITSC2011, edited by B. R. Marple, A. Agarwal, M. M. Hyland, et al. DVS Media GmbH, 2011. http://dx.doi.org/10.31399/asm.cp.itsc2011p0603.

Full text

Abstract:

Abstract Microstructure and mechanical properties of 7075 Al alloy matrix and SiC reinforced composite coatings deposited on a T6 6061 Al alloy by cold spray are investigated. Feedstocks are prepared as mixtures of 7075 Al alloy and SiC powders with SiC content varying between 0 to 40 vol. %. Microstructural characterization is carried out by optical and scanning electron microscopic examinations and X-ray diffraction (XRD) analysis. The coatings mechanical behavior is evaluated using hardness measurements and wear tests. Wear tests are conducted under dry conditions using a ball-on disc teste

APA, Harvard, Vancouver, ISO, and other styles

6

Vallimanalan, A., M. Murali, R. Mahendran, and S. Manivannan. "Corrosion Properties of Aluminium 7075 Basalt Particulate Reinforced Metal Matrix Composite Prepared by Stir Casting." In Automotive Technical Papers. SAE International, 2024. https://doi.org/10.4271/2024-01-5201.

Full text

Abstract:

<div class="section abstract"><div class="htmlview paragraph">Basalt-based products are known to provide substantial wear and corrosion resistance even in harsh environments. This paper aims to explore the stir casting technique as an efficient way to reinforce basalt particulates into Aluminium (AA7075). The properties such as hardness, ultimate tensile strength with corrosion behaviour of the composites were evaluated and compared with as-cast AA7075 fabricated under the same conditions. It is evident from the results that an increase in basalt particulate content significantly i

APA, Harvard, Vancouver, ISO, and other styles

7

P., Geetha Satya Sai Sree, Ravi Kumar Narra, and V. Rama Koteswara Rao. "Comparison of tensile properties of Al 5154 /SiC/ TiB2 with Al 7075/6063 metal matrix composites." In THE 3RD INTERNATIONAL CONFERENCE ON MATHEMATICS AND SCIENCES (THE 3RD ICMSc): A Brighter Future with Tropical Innovation in the Application of Industry 4.0. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0120273.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Leela Prasanna Lakshmi, S., and K. Prahlada Rao. "Multi-Objective Optimization of Laser Cutting Process on Al 7075 Metal Matrix Composites for Automobile Applications." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0077.

Full text

Abstract:

<div class="section abstract"><div class="htmlview paragraph">Aluminum is preferred as a material for matrix composites due to its high technical characteristics and low density. Due to its stiffness, specific strength, and wear resistance, MMCs are being widely used in various automotive applications. Due to its high strength and toughness, Al 7075 is a widely used heat treatable aluminum alloy. It is also used in the car and aerospace industries. B4C is a highly attractive reinforcing material due to its thermal and chemical stability. Compared to other reinforcements such as SiC

APA, Harvard, Vancouver, ISO, and other styles

9

Kandpal, Bhaskar Chandra, Nitin Johri, Nilesh Ramdas, et al. "Analysis of mechanical properties of aluminium alloy 7075 based metal matrix composites utilizing stir casting blade stirrer." In 3RD INTERNATIONAL CONFERENCE OF BIO-BASED ECONOMY FOR APPLICATION AND UTILITY. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0113055.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Prabhakar, Pranav Kumar, Joseph Manuel, S. Kaliappan, Pravin P. Patil, T. Mothilal, and H. Mohammed Ali. "Mechanical and wear properties of 7075 Al reinforced with graphite particulate metal matrix composites: Preparation and evaluation." In THE FOURTH SCIENTIFIC CONFERENCE FOR ELECTRICAL ENGINEERING TECHNIQUES RESEARCH (EETR2022). AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0167686.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!