To see the other types of publications on this topic, follow the link: AA6063.

Journal articles on the topic 'AA6063'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'AA6063.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Agustín-Sáenz, Cecilia, Patricia Santa Coloma, Francisco J. Fernández-Carretero, Fabiola Brusciotti, and Marta Brizuela. "Design of Corrosion Protective and Antistatic Hybrid Sol-Gel Coatings on 6XXX AlMgSi Alloys for Aerospace Application." Coatings 10, no. 5 (2020): 441. http://dx.doi.org/10.3390/coatings10050441.

Full text
Abstract:
An inorganic–organic coating based on glycidyl-functionalized silica and zirconia was synthesized by sol-gel technology to protect three types of AlMgSi (6XXX series) alloys against corrosion in aerospace applications. Different parameters such as the solid content, the organic/inorganic ratio of the sols and the deposition conditions were studied with the aim to achieve a tradeoff between the corrosion protection, antistatic performance and low vacuum-induced outgassing. Those parameters directly influence the thickness and the density of the coatings, and therefore the barrier effect against
APA, Harvard, Vancouver, ISO, and other styles
2

Saravanan, S., P. Senthil Kumar, T. Palanisamy, et al. "Accelerated Short-Term Techniques to Evaluate Corrosion in TiC Reinforced AA6063 Composites." JOURNAL OF ADVANCES IN CHEMISTRY 13, no. 10 (2017): 5905–13. http://dx.doi.org/10.24297/jac.v13i10.5898.

Full text
Abstract:
AA6063-TiC composites have several weight percentages up to 9 wt. % were fabricated by using stir casting route method. The effects of the weight percentage of TiC particles on the microstructures and corrosion behavior of AA6063-TiC composites were studied. The results revealed that the AA6063-TiC composites exhibited higher density than the AA6063 matrix. The accelerated corrosion tests of AA6063-TiC composites in 3.5 wt. % NaCl aqueous solution at room temperature, the AA6063-TiC composites have better corrosion resistance than the AA6063 matrix. Increasing the weight percentage of the TiC
APA, Harvard, Vancouver, ISO, and other styles
3

Chapke, Yashwanth, and Dinesh N. Kamble. "Effect of friction-welding parameters on the tensile strength of AA6063 with dissimilar joints." Frattura ed Integrità Strutturale 16, no. 62 (2022): 573–84. http://dx.doi.org/10.3221/igf-esis.62.39.

Full text
Abstract:
In this paper, the effect of welding parameters of rotary friction welding between AA6063 and AISI4130 and AA6063 and Copper are investigated. The major influencing parameters considered are upset pressure, friction time and friction pressure of friction welding are considered for this study. The Taguchi’s design of experiments was conducted for the influencing parameters and their levels. The tensile test experimentation was carried out and the results of the AA6063 and AISI4130 and AA6063 and Copper are compared. The ultimate tensile strength of AA6063-AISI4130 joint and AA6063-Copper joint
APA, Harvard, Vancouver, ISO, and other styles
4

Raj Kumar, R., Gnana Prasanna, and G. S. Hikku. "Parameter optimization for wire-cut electrical discharge machining of stir cast AA6063 alloy/SiC (black and green) using Taguchi method with grey relational analysis." Materials Science-Poland 40, no. 1 (2022): 68–83. http://dx.doi.org/10.2478/msp-2022-0011.

Full text
Abstract:
Abstract The present investigation aimed to determine the optimal parameters for wire-cut electrical discharge machining (WEDM) for stir cast aluminum alloy AA6063 at 850°C reinforced with 10 wt.% green SiC (SiC g ) and black SiC (SiC b ) particles. The WEDM machining parameters, such as pulse on time (TON ), wire feed (WF) rate, and flushing pressure (FP) of the resultant stir cast AA6063/SiC b and AA6063/SiC g composites, were optimized using the Taguchi method with L9 orthogonal array to estimate the responses, such as surface roughness and metal removal rate. Further, through grey relation
APA, Harvard, Vancouver, ISO, and other styles
5

Öztürk, İsmail, and Burak Sercan Kaya. "Effect of heat-treatment on crash performance in bumper beam and crash box design and optimization of the system." Materials Testing 64, no. 6 (2022): 768–79. http://dx.doi.org/10.1515/mt-2021-2134.

Full text
Abstract:
Abstract Within the study’s scope, impact analyses of homogeneous bumper beam-crash box systems designed from AA6063-O, AA6063-T5, and AA6063-T6 materials and hybrid systems designed from combinations of these materials were made and compared in terms of energy absorption values. In designs where failure does not occur, the highest energy absorption value was obtained using the AA6063-T5 bumper beam and AA6063-O crash box system, and single and multi-objective optimization studies were conducted using this design. The optimal bumper system improved the crash performance of the structure. Accor
APA, Harvard, Vancouver, ISO, and other styles
6

Srinivasan, D., M. Meignanamoorthy, Amel Gacem, et al. "Tribological Behavior of Al/Nanomagnesium/Aluminum Nitride Composite Synthesized through Liquid Metallurgy Technique." Journal of Nanomaterials 2022 (August 24, 2022): 1–12. http://dx.doi.org/10.1155/2022/7840939.

Full text
Abstract:
Despite its excellent qualities such as hardness, tensile, and yield strength, aluminum alloys are mostly used in aviation fins and car frames. However, wear resistance at maximum load is weak. This effort will now synthesize and investigate the tribological behavior of AA6063- (AlMg0.7Si-) AlN composites. The goal of this experiment is to determine the best wear rate and coefficient of friction for the AA6063-AlN with nanomagnesium composites developed. Weight percent, load (L), sliding velocity (SV), and sliding distance (SD) are the process factors studied, and the output responses are wear
APA, Harvard, Vancouver, ISO, and other styles
7

S, Senthil Kumaran, Jayakumar Kaliappan, Kathiravan Srinivasan, Yuh-Chung Hu, Sanjeevikumar Padmanaban, and Srinivasan N. "Realizing a Novel Friction Stir Processing-Enabled FWTPET Process for Strength Enhancement Using Firefly and PSO Methods." Materials 13, no. 3 (2020): 728. http://dx.doi.org/10.3390/ma13030728.

Full text
Abstract:
The friction welding of tube to tube plate using an external tool (FWTPET) is widely deployed in several industrial applications, such as aerospace, automotive, and power plants. Moreover, for achieving a better tensile strength and hardness in the weld zone, the friction stir processing (FSP) technique was incorporated into the FWTPET process for joining aluminum alloys (AA6063 tube, AA6061 tube plate). Furthermore, it has to be noted that FWTPET was applied for joining the AA6063 tube to the AA6061 tube plate, and FSP was deployed for reinforcing the weld zone with carbon nanotube (CNT) and
APA, Harvard, Vancouver, ISO, and other styles
8

Setyawan, H., N. Muhayat, M. Z. Yuliadi, Y. H. P. Manurung, and T. Triyono. "Effect of artificial ageing temperature in T6-heat treatment on the mechanical properties of dissimilar metals weld between AA5083 and AA6063." Archives of Materials Science and Engineering 123, no. 2 (2023): 72–85. http://dx.doi.org/10.5604/01.3001.0054.2494.

Full text
Abstract:
Aluminium AA5083 is commonly utilised in constructing ship hull shells, which are welded with aluminium AA6063 to act as stiffeners. However, the joints often suffer structural damage, such as longitudinal and transverse cracks in the dissimilar weld area, particularly in the Heat-Affected Zone (HAZ) of AA6063, which includes frames, brackets, and collars. To enhance the mechanical properties of AA6063, T6 heat treatment is commonly employed. The given study investigates the impact of temperature in artificial ageing during the T6 heat treatment on the microstructure and mechanical properties
APA, Harvard, Vancouver, ISO, and other styles
9

Balasubramanian, I. "A Study on Surface Roughness and Cutting Width for Circular Contour Machining of Stir Cast AA6063/SiC Composites in WEDM." JOURNAL OF ADVANCES IN CHEMISTRY 13, no. 10 (2017): 6524–30. http://dx.doi.org/10.24297/jac.v13i10.5829.

Full text
Abstract:
Wire electrical discharge machining is used in machining electric conductive materials with intricate shapes and profiles. This paper presents an experimental investigation on the influence of cutting conditions of WEDM on surface roughness and cutting width of machining of AA6063/SiC composites. Here a semi cylindrical piece is removed from a rectangular plate of AA6063/SiC composites plate fabricated with reinforcing SiC in 0%, 5%, 10% and 15% weight fractions through stir casting. The effect of WEDM parameters such as pulse on time, pulse off time and peak current on surface roughness and c
APA, Harvard, Vancouver, ISO, and other styles
10

Singh, Nilamber K., Maloy K. Singha, Ezio Cadoni, and Narinder K. Gupta. "Strain Rate Sensitivity of an Aluminium Alloy under Compressive Loads." Advanced Materials Research 548 (July 2012): 169–73. http://dx.doi.org/10.4028/www.scientific.net/amr.548.169.

Full text
Abstract:
An experimental investigation on the dynamic compressive behaviour of the aluminium alloy, AA6063-T6 in the strain rate range from 0.001s-1 to 850s-1 is reported here. Cylindrical specimens of AA6063-T6 are tested under universal testing machine at quasi-static (0.001s-1) condition, whereas, experiments at high strain rates (110s-1,400s-1,550s-1,700s-1 and 850s-1) are conducted on the traditional split Hopkinson pressure bar setup. The strain hardening in the material is found to increase with increasing strain rate. It is observed that the existing Johnson-Cook material model with appropriate
APA, Harvard, Vancouver, ISO, and other styles
11

Couper, Malcolm J., Barbara Rinderer, and Ji Yong Yao. "Characterisation of AlFeSi Intermetallics in 6000 Series Aluminium Alloy Extrusions." Materials Science Forum 519-521 (July 2006): 303–8. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.303.

Full text
Abstract:
Alloys designed to optimise strength and extrudability have a lower alloy Mg to Si ratio than has commonly been used in AA6060 and AA6063 alloys. Intermetallic phases have an impact on alloy design since they tie up some of the Mg and Si alloy content. The effect of Mg and Si alloy content on the type of intermetallic phases present has been investigated using TEM, SEM and Thermocalc analysis. Results for Al-Mg-Si-Fe alloys with 0.46 - 0.70 wt%Mg, 0.27 - 1.24 wt%Si and 0.09 - 0.22 wt%Fe are presented. The occurrence of a-AlFeSi (various stoichiometries), b- Al5FeSi, p-Al8FeSi6Mg3, Mg2Si and Si
APA, Harvard, Vancouver, ISO, and other styles
12

Kashyap, Kishore T., K. Bagaria Puneeth, Aniruddha Ram, and Praveenath G. Koppad. "Ageing Kinetics in Carbon Nanotube Reinforced Aluminium Alloy AA6063." Materials Science Forum 710 (January 2012): 780–85. http://dx.doi.org/10.4028/www.scientific.net/msf.710.780.

Full text
Abstract:
Multiwalled carbon nanotubes (MWCNTs) were added to Aluminium alloy AA6063 by powder metallurgy route. The samples were compacted, sintered and microhardness was measured on sintered samples. The weight fraction of MWCNTs was varied between 0.5-2.5%. The hardness of the composite has been observed to increase. The ageing curves after solutionizing and artificial ageing have been plotted for various weight fractions of MWCNTs in AA6063 alloy. Electroless copper coating was given to CNTs and the hardness of the samples with Cu coated CNTs in AA6063 showed a higher hardness than the samples witho
APA, Harvard, Vancouver, ISO, and other styles
13

Aziz, M. Abdel, T. S. Mahmoud, Z. I. Zaki, and A. M. Gaafer. "Heat Treatment and Wear Characteristics of Al2O3 and TiC Particulate Reinforced AA6063 Al Alloy Hybrid Composites." Journal of Tribology 128, no. 4 (2006): 891–94. http://dx.doi.org/10.1115/1.2345416.

Full text
Abstract:
In this article, the heat treatment and dry sliding wear behavior of Al-based AA6063 alloy reinforced with both TiC and Al2O3 ceramic particles were studied. The particles were synthesized by self-propagating high temperature synthesis (SHS) technique. The prepared composite alloy contains 5vol.%Al2O3 and 5vol.% TiC particles. The composite alloy was prepared by vortex method. To attain the peak hardness values of the alloys, age hardening behavior of the monolithic alloy and also the composite alloy was investigated. The wear tests were performed at room temperature using a pin-on-disk type a
APA, Harvard, Vancouver, ISO, and other styles
14

Madura, Jacek, Sandra Puchlerska, Maciej Balcerzak, et al. "Development of Low-Weight and High-Strength AA6005A Extrudates Intended for Modern Architecture and Design of Innovative Die for Extrusion Process." Materials 17, no. 10 (2024): 2437. http://dx.doi.org/10.3390/ma17102437.

Full text
Abstract:
In the realm of modern architecture, the demand for materials that combine strength, durability, and aesthetic flexibility is ever-growing. Addressing this need, this paper presents a study on the innovative use of aluminum extrudates in construction. Focusing on the AA6005 alloy, which is known for its excellent balance of strength, corrosion resistance, and weldability, this research delves into the development of an extrusion process that yields thin-walled, lightweight, yet high-strength structural components. Using FEM simulations, a new extrudate of the AA6005A was developed. It is compa
APA, Harvard, Vancouver, ISO, and other styles
15

Akintayo Rotibi, Kunle Adesina, and Segun Michael Abegunde. "Raphia taedigera seed extract as a green corrosion inhibitor for the corrosion of mild steel in acidic media." World Journal of Advanced Engineering Technology and Sciences 6, no. 1 (2022): 040–46. http://dx.doi.org/10.30574/wjaets.2022.6.1.0063.

Full text
Abstract:
In the present work, ethanolic extract of Raphia taedigera seed was used as corrosion inhibitor for Aluminium alloy 6063 (AA6063) in an acidic environment. The evaluation was carried out with different dosages of the seed extract in 1.0 M HCl using the weight loss method at room temperature. The present study results confirmed that the Raphia taedigera seed extract acts as an effective green corrosion inhibitor for AA6063 in the acid medium. The inhibition efficiency increased with an increase in the extract concentration of the inhibitor. FTIR and SEM analyses confirmed the formation of a pro
APA, Harvard, Vancouver, ISO, and other styles
16

Arun, K. S., T. Panneerselvam, and S. Raghuraman. "Study on Mechanical Properties of Aluminium Based Metal Matrix Composites by Hybrid Reinforcement." Applied Mechanics and Materials 813-814 (November 2015): 116–20. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.116.

Full text
Abstract:
Now a day’s Hybrid Metal Matrix composites has a large number of applications in automobiles, aircrafts and structural applications like brake rotors, engine parts and cylinder liners. The aim of this study is to determine the mechanical properties of boron carbide (B4C) and zirconium silicate (ZrSiO4) particulate reinforced with AA6063 alloy composites. In this experimental study, B4C and ZrSiO4 particulates reinforced with AA6063 composites were manufactured by stir casting technique. Mechanical properties of these composite materials were investigated by different weight percentages, 3%, 6%
APA, Harvard, Vancouver, ISO, and other styles
17

Yeşildal, Ruhi, Sadberk Sezer, and Filiz Karabudak. "Investigation of Tensile and Fatigue Behavior of Cr/CrN/TiCrN/TiCrCN Multilayer Films Coated on AA6063 and AZ91 Alloys by Closed-Field Unbalanced Magnetron Sputtering Process." Applied Sciences 15, no. 7 (2025): 3525. https://doi.org/10.3390/app15073525.

Full text
Abstract:
Despite the widespread use of Mg and Al alloys among light metals in the automobile and aviation industries, they have low tensile and fatigue strength. Therefore, in the present work, AZ91 Mg and AA6063 Al alloys were coated with a multilayer transition metal nitride film (Cr/CrN/TiCrN/TiCrCN) to increase fatigue and tensile strength. Films with Cr/CrN/TiCrN/TiCrCN microstructure architecture were synthesized on the surfaces of AZ91 Mg and AA6063 Al alloys using the CFUBMS (closed-field unbalanced magnetron sputtering) system, one of the PVD (physical vapor deposition) techniques. Films’ stru
APA, Harvard, Vancouver, ISO, and other styles
18

Zhang, K., T. Pettersen, C. O. Paulsen, K. Marthinsen, B. Holmedal, and A. Segatori. "Recrystallization behaviour of AA6063 extrusions." IOP Conference Series: Materials Science and Engineering 89 (August 7, 2015): 012057. http://dx.doi.org/10.1088/1757-899x/89/1/012057.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Mingmuang, Dhammasook, Sukangkana Talangkun, Chawalit Thinvongpitak, Plato Kapranos, Anuprong Pronpijit, and Warunee Bowornkiatkaew. "Effect of Welding Speed on Deformation Behavior of Friction Welded Aluminium/Alumina." Key Engineering Materials 718 (November 2016): 148–53. http://dx.doi.org/10.4028/www.scientific.net/kem.718.148.

Full text
Abstract:
The objective of this experiment was to investigate deformation behavior of friction welded aluminium AA6063/alumina. Effect of welding speed on microstructural change and temperature gradient were determined. The result showed effects of welding speed on temperature and grains flow. Microstructures at the interfaces in all conditions exhibited recrystallised grains and hot deformation characteristic. Areas of Heat affected zone (HAZ) decreased with increasing welding speed. Hardness of recrystallised AA6063 grains decreased approximately by 30%. Increasing in amount of deformation increased t
APA, Harvard, Vancouver, ISO, and other styles
20

Mendoza-Oliveros, Martin Emilio, Angie Katerine Jimenez Miguez, Yeny Angélica Bautista Vargas, et al. "Study of the stir speed and time in AA6030 matrix reinforced with Al2O3 nanoparticles." Journal of Applied Research and Technology 20, no. 1 (2022): 17–23. http://dx.doi.org/10.22201/icat.24486736e.2022.20.1.1642.

Full text
Abstract:
The effect of speed and time of stirring for AA6063 matrix manufactured by Electric Induction Furnace and reinforced 0.75wt.% and 1.5wt.% of Al2O3 nanoparticles is studied. The Specimens produced were subjected to tensile, microhardness, and tribology tests. It is observed that an increase in the speed and agitation time for AA6063 samples reinforced with 0.75%, favors an increase in the grain size, while an opposite effect is observed with the pieces produced with 1.5%, where a grain refining effect is favored, affecting the mechanical properties of the reinforced alloy.
APA, Harvard, Vancouver, ISO, and other styles
21

Thirupathaiah C. "Prediction of Optimal Drilling Parameters of Aa6063/Sic/B4c/Fa Hybrid Composites using Taguchi and Topsis Techniques." Journal of Information Systems Engineering and Management 9, no. 4s (2024): 41–56. https://doi.org/10.52783/jisem.v9i4s.10991.

Full text
Abstract:
This research explores the optimal machining parameters for drilling AA6063/SiC/B4C/FA hybrid composites using a novel multi-response optimization approach that TOPSIS with a Taguchi-based technique. AA6063, an architectural alloy, is characterized by limited strength, surface hardness, and moderated machinability. To enhance these properties, ceramic particles such as SiC, B4C, and FA are incorporated into the base AA6063 using a stir-casting process. This study aims to optimize the drilling conditions to improve the performance and durability of the resulting hybrid composites. A Taguchi L-3
APA, Harvard, Vancouver, ISO, and other styles
22

Grinspan, A. Sahaya, and R. Gnanamoorthy. "Surface modification by oil jet peening in Al alloys, AA6063-T6 and AA6061-T4." Applied Surface Science 253, no. 2 (2006): 997–1005. http://dx.doi.org/10.1016/j.apsusc.2005.12.164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Abdullah, Allina, Afiqah Azman, and B. M. Khirulrizwan. "Optimization of Surface Roughness by Using Different Cutting Tools for Aluminum Alloy 6063." Journal of Computational and Theoretical Nanoscience 17, no. 2 (2020): 961–66. http://dx.doi.org/10.1166/jctn.2020.8750.

Full text
Abstract:
This research outlines an experimental study to determine the optimum parameter of cutting tool for the best surface roughness (Ra) of Aluminum Alloy (AA) 6063. For the experiment in this research, cutting parameters such as cutting speed, depth of cut and feed rate are used to identify the effect of both cutting tools which are tungsten carbide and cermet towards the surface roughness (Ra) of material AA6063. The machining operation involved to cut the material is turning process by using Computer Numerical Control (CNC) Lathe machine. The experimental design was designed by Full Factorial. T
APA, Harvard, Vancouver, ISO, and other styles
24

Prasanna, N. Gnana, R. Rajkumar, and F. Michael Raj. "Non-destructive evaluation from deformed aluminum alloy 6063 and silicon carbides black and green reinforced aluminium alloy based composites." Materials Express 12, no. 3 (2022): 435–45. http://dx.doi.org/10.1166/mex.2022.2166.

Full text
Abstract:
In this work, tensile mechanical properties of the aluminum alloy 6063 (AA6063) with reinforced silicon carbides (SiC) black and green aluminium based composites and the deformed specimens are analyzed using nondestructive evaluation (NDE) of ultrasonic inspections. The specimens making of various weight proportions and its manufacturing of stir casting technique. After tensile test the deformed specimens measure the surfaces using scanning electron microscope (SEM) and Energy Dispersive X-ray spectrum (EDX). Also, conduct the salt spray test of the deformed specimens and compare the surfaces
APA, Harvard, Vancouver, ISO, and other styles
25

Mahmoud, T. S. "Effect of friction stir processing on electrical conductivity and corrosion resistance of AA6063-T6 Al alloy." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 222, no. 7 (2008): 1117–23. http://dx.doi.org/10.1243/09544062jmes847.

Full text
Abstract:
The aim of this paper is to study the effect of friction stir processing (FSP) on electrical conductivity and corrosion resistance of AA6063-T6 Al alloy. Also, the microstructural and mechanical characteristics were examined. Different samples were structured by employing a constant feed rate (ν) of 120 mm/min and different rotating speeds (ω) of 250, 315, 400, 500, 630, and 800 r/min. The results showed that FSP significantly refines the microstructure of the AA6063-T6 Al alloy. Increasing the rotational speed increases the grain size in the centres of stirred zones (SZ). The FSP significantl
APA, Harvard, Vancouver, ISO, and other styles
26

Lu, Cen, Songlin Mu, Jun Du, Kai Zhang, Mincheng Guo, and Ling Chen. "Investigation on the composition and corrosion resistance of cerium-based conversion treatment by alkaline methods on aluminum alloy 6063." RSC Advances 10, no. 60 (2020): 36654–66. http://dx.doi.org/10.1039/d0ra07201j.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Baratzadeh, Farzad, Enkhsaikhan Boldsaikhan, Rajeev Nair, Dwight Burford, and Hamid Lankarani. "Investigation of mechanical properties of AA6082-T6/AA6063-T6 friction stir lap welds." Journal of Advanced Joining Processes 1 (March 2020): 100011. http://dx.doi.org/10.1016/j.jajp.2020.100011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

FAKRUDEEN, SANAULLA PATHAPALYA, ANANDA MURTHYH. C, and BHEEMA RAJU V. "CORROSION INHIBITION OF AA6061 AND AA6063 ALLOY IN HYDROCHLORIC ACID MEDIA BY SCHIFF BASE COMPOUNDS." Journal of the Chilean Chemical Society 57, no. 4 (2012): 1364–70. http://dx.doi.org/10.4067/s0717-97072012000400007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Dhabale, Rahul B., Vijaykumar S. Jatti, Nitin K. Khedkar, and Vinaykumar S. Jatti. "Friction Stir Welding of Dissimilar Materials with Reinforcement of Copper Particulates." Key Engineering Materials 941 (March 17, 2023): 3–10. http://dx.doi.org/10.4028/p-ltn695.

Full text
Abstract:
In this study, the controlled input parameters namely welding speed and spindle speed were optimized by Taguchi method for reinforcement of copper particulates in aluminium alloy (AA6061-AA6063-T6). High carbon and high chromium steel i.e. tool steel D2 type material is used as a friction stir welding tool. Subsequently, the effects of the process parameters were investigated. The signal-to-noise ratios and analysis of variance were applied for statistical analysis. The outcome shows welding speed is the significant parameter than spindle speed. Under the optimum process parameters, 1400 rpm w
APA, Harvard, Vancouver, ISO, and other styles
30

Ma, Y., X. Zhou, J. Wang, et al. "Discoloration of Anodized AA6063 Aluminum Alloy." Journal of The Electrochemical Society 161, no. 6 (2014): C312—C320. http://dx.doi.org/10.1149/2.065406jes.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Medel-Plaza, M., A. Conde, J. J. de Damborenea, J. J. Aguilera-Correa, J. Esteban, and M. A. Arenas. "Tailoring AA6063 for improving antibacterial properties." Applied Surface Science Advances 19 (February 2024): 100574. http://dx.doi.org/10.1016/j.apsadv.2024.100574.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Kumar, Dr B. Vijaya, B. Srikanth, and B. Raju Ch Sandeep D. Indu. "Friction Stir Spot Welding of Aluminium Alloy AA6063." International Journal of Trend in Scientific Research and Development Volume-3, Issue-3 (2019): 1291–94. http://dx.doi.org/10.31142/ijtsrd23316.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Dhabale, Rahul B., Vijay K. Kurkute, Sanket S. Unde, Pradeep Jadhav, Vrushali R. Dhabale, and Anirban Sur. "Multi objective Optimizations of friction stir welding process parameters for reinforcement of copper particles in aluminum alloy using Taguchi based grey relational analysis (GRA) and ANOVA." Journal of Physics: Conference Series 2604, no. 1 (2023): 012001. http://dx.doi.org/10.1088/1742-6596/2604/1/012001.

Full text
Abstract:
Abstract In this paper, optimize process parameters of friction stir welding for reinforcement of copper particulate in between aluminum alloys. It is to boost the thermal conductivity and mechanical properties of base metals. Two dissimilar aluminum alloys with different mechanical properties .AA6061-AA6063. successfully joined. In addition, the introducing copper particles of 325 mesh size in between aluminum alloy 6061 and 6063. It is a direct application of rotating non-consumable friction stir welding tool plunged for reinforcement. Introduction of a copper particle in between aluminum al
APA, Harvard, Vancouver, ISO, and other styles
34

Ravendra, Jujavarapu Sai, and Palukuri Veerendra. "Studies on Effect of Tool Pin Profiles and Welding Parameters on the Friction Stir Welding of Dissimilar Aluminium Alloys AA5052 & AA6063." International Journal for Research in Applied Science and Engineering Technology 10, no. 4 (2022): 3077–89. http://dx.doi.org/10.22214/ijraset.2022.41986.

Full text
Abstract:
Abstract: Friction stir welding (FSW) is a solid-state joining process that uses the frictional heat generated by the rotating tool to soften the metals to form the joint. It is an effective technique for joining dissimilar aluminum alloys and finds its application in various fields such as aerospace and automotive industries. FSW process is energy efficient and environment friendly process. This FSW can produce joints with higher mechanical and metallurgical properties. Formerly, FSW was adopted for low melting metals like aluminum alloys. The various FSW parameters play a vital role in deter
APA, Harvard, Vancouver, ISO, and other styles
35

Chapke, Yashwant, Dinesh Kamble, and Saoud Md Salim Shaikh. "Friction welding of Aluminium Alloy 6063 with copper." E3S Web of Conferences 170 (2020): 02004. http://dx.doi.org/10.1051/e3sconf/202017002004.

Full text
Abstract:
Friction welding process is a forging welding process in which work piece are joined due to heat produced by friction between two joining surfaces and upset pressure is applied by non-rotating work piece. Joining of aluminum alloy with dissimilar material is important research area to focus on as maximum aircraft structures havexx Aluminum alloy frame and aerospace designers familiar with Aluminum alloy and its design considerations. After comparison of mechanical properties and application of light weight alloys aluminum alloys, tungsten, stainless steel and copper, copper selected as dissimi
APA, Harvard, Vancouver, ISO, and other styles
36

Negozio, Marco, Riccardo Pelaccia, Lorenzo Donati, Barbara Reggiani, Tommaso Pinter, and Luca Tomesani. "Finite Element Model Prediction of Charge Weld Behaviour in AA6082 and AA6063 Extruded Profiles." Journal of Materials Engineering and Performance 30, no. 6 (2021): 4691–99. http://dx.doi.org/10.1007/s11665-021-05752-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Adeosun, S. O., O. I. Sekunowo, M. A. Bodude, A. A. Agbeleye, S. A. Balogun, and H. O. Onovo. "Effect of Artificial Aging on Plane Anisotropy of 6063 Aluminium Alloy." ISRN Metallurgy 2012 (February 15, 2012): 1–5. http://dx.doi.org/10.5402/2012/639319.

Full text
Abstract:
Most aluminum profiles’ production by deep-drawing and extrusion processes require certain degree of structural homogeneity because of the segregated second-phase particles in the as-cast structure. Rolled texture and directionality in properties often give rise to excessive earring, breakout, and tears. This study investigates the effect of heat treatment (artificial aging) on the anisotropic behavior of AA6063 alloy between rolling direction (0°) through 90° directions. The results show significant reduction in property variability in the aged samples along the rolling direction 0°, and 90°
APA, Harvard, Vancouver, ISO, and other styles
38

Saravana Kumar, A., and P. Sasikumar. "Mechanical Properties of Multi Axially Forged Hybrid Composite." Applied Mechanics and Materials 813-814 (November 2015): 90–94. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.90.

Full text
Abstract:
This work investigated the influence of multi axial forging (MAF) on the microstructure and mechanical properties of AA6063/Al2O3/Gr hybrid composite. It reveals that the effectiveness of forged composite exhibited better mechanical properties. The AA6063 reinforced with Al2O3 and 1 wt. % graphite (Gr) hybrid composite were fabricated using stir casting technique. The microstructure of the hybrid composite was examined using optical microscope. The mechanical properties in terms of hardness, flexural strength and compression strength were investigated. It was observed that the mechanical prope
APA, Harvard, Vancouver, ISO, and other styles
39

Loukus, Adam R., Ghatu Subhash, and Mehdi Imaninejad. "Optimization of Material Properties and Process Parameters for Tube Hydroforming of Aluminum Extrusions." Journal of Engineering Materials and Technology 129, no. 2 (2006): 233–41. http://dx.doi.org/10.1115/1.2400259.

Full text
Abstract:
Analysis of process optimization for hydroforming of central-bulge and T-branch from AA6063 tubes is conducted for W-temper and T4 heat-treated conditions. Systematic characterization of AA6063 mechanical properties as a function of aging time was also conducted. It was found that hydroforming in the W temper facilitates forming of a bigger T branch (due to available greater ductility), but limits the strength (hardness) of the final component compared to that formed in the T4 condition. By optimizing the material heat-treatment conditions and the process parameters during hydroforming, strain
APA, Harvard, Vancouver, ISO, and other styles
40

Zhao, Ying, Bao Yun Song, Jiu Yang Pei, Chun Bo Jia, Bing Li, and Lin Lin Guo. "FEM Simulation of Weld Quality of AA6063 Aluminium Alloy Profiles during Continuous Extrusion Process with Double Feedstocks." Advanced Materials Research 641-642 (January 2013): 427–31. http://dx.doi.org/10.4028/www.scientific.net/amr.641-642.427.

Full text
Abstract:
In this study, a FE simulation model of the continuous extrusion process with double feedstocks is established. It is aimed to investigate the weld quality of AA6063 aluminium alloy profiles. The results show that with the height of preformed die increasing, the pressure-to-effective stress ratio (K) increases greatly and the welds can be improved. The maximum value of K reaches to 5.5. By observation the microstructure of the welding zone, the extrusion welding line does not extend to the product surface. No defects appeared on the surface of the extruded product. It is proved that the AA6063
APA, Harvard, Vancouver, ISO, and other styles
41

Meignanamoorthy, M., V. Mohanavel, P. Velmurugan, et al. "Effect of Nanoaluminium Nitride Ceramic Particles on Microstructure, Mechanical Wear, and Machining Behavior of Al-Si-Mg Alloy Matrix Composites Produced by Bottom Pouring Type Stir Casting Route." Journal of Nanomaterials 2022 (February 3, 2022): 1–14. http://dx.doi.org/10.1155/2022/5013914.

Full text
Abstract:
Aluminium alloy strengthened with the ceramic particle is widely utilized for numerous engineering usages owing to its less weight, and superior mechanical and tribological behavior. The purpose of this research is to manufacture AA6063-Nano AlN composites via stir casting (SC) process and to examine the mechanical, tribological, electrical, and thermal and CNC drilling behavior. Nano AlN was mixed with AA6063 at 4, 8, and 12 wt.%. The occurrence and dispersal of Nano AlN particles in AA6063 matrix were inspected via Scanning Electron Microscope (SEM). The density and porosity were explored. T
APA, Harvard, Vancouver, ISO, and other styles
42

Gallegos-Melgar, Adriana, Yael González-López, Arturo Abúndez, et al. "Characterization of a C-Based Coating Applied on an AA6063 Alloy and Developed by a Novel Electrochemical Synthesis Route." Coatings 10, no. 2 (2020): 145. http://dx.doi.org/10.3390/coatings10020145.

Full text
Abstract:
This research aimed to obtain a C-based coating electrochemically applied on an AA6063 alloy. Two electrochemical cells were designed and manufactured to obtain the C-based coating film on flat and cylindrical samples. Structural and microstructural characterizations were performed along with fatigue and corrosion performance testing. The structural and microstructural characterization revealed that the C-based coating deposited on AA6063 corresponded to carbon nanofibers and/or polycrystalline graphite. The performance testing showed an increase in fatigue life along with a decrease in corros
APA, Harvard, Vancouver, ISO, and other styles
43

Alberto Muñoz, Jairo, Alexander Komissarov, Martina Avalos, and Raúl E. Bolmaro. "Heat treatment effect on an AA6063 alloy." Materials Letters 277 (October 2020): 128338. http://dx.doi.org/10.1016/j.matlet.2020.128338.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Dai, Mimi, Eduard Feireisl, Elisabetta Rocca, Giulio Schimperna, and Maria E. Schonbek. "Analysis of a diffuse interface model of multispecies tumor growth." Nonlinearity 30, no. 4 (2017): 1639–58. http://dx.doi.org/10.1088/1361-6544/aa6063.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Sharma, Ojasvi, Prateek Gupta, and Tarun Kumar. "Fabrication And Characterisation of AA6063-T6/SiC/Waste Bone Powder Using Electromagnetic Stir Casting." IOP Conference Series: Materials Science and Engineering 1248, no. 1 (2022): 012076. http://dx.doi.org/10.1088/1757-899x/1248/1/012076.

Full text
Abstract:
Abstract Electromagnetic stir casting (EMSC) is a highly effective process to produce the metal matrix composite (MMC) because of the uniform mixing of reinforcement with the matrix. The current research is to investigate AA6063-T6/2wt%SiC/5wt%WBP hybrid composite using Microstructure analysis, Field emission scanning electron microscopy (FESEM), X-ray diffraction analysis (XRD), Energy dispersive X-ray spectroscopy (EDS), Tensile strength and Hardness. Stirring time and speed is kept as constant parameter. Microstructure analysis reveals that there is uniform distribution of reinforcement in
APA, Harvard, Vancouver, ISO, and other styles
46

Mehtedi, M. El, S. Spigarelli, F. Gabrielli, and L. Donati. "Comparison Study of Constitutive Models in Predicting the Hot Deformation Behavior of AA6060 and AA6063 Aluminium Alloys." Materials Today: Proceedings 2, no. 10 (2015): 4732–39. http://dx.doi.org/10.1016/j.matpr.2015.10.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Adediran, Adeolu Adesoji, Francis Odikpo Edoziuno, Olanrewaju Seun Adesina, et al. "Mechanical Characterization and Numerical Optimization of Aluminum Matrix Hybrid Composite." Materials Science Forum 1065 (June 30, 2022): 47–57. http://dx.doi.org/10.4028/p-m21wne.

Full text
Abstract:
Hybridization of aluminium matrix composite is with a view to offset the properties deficient in one composite reinforcement. The present investigation involves a comparative study of AA6063 matrix composites with single reinforcement of Al2O3, SiC, graphene respectively and various hybridized proportions of the same reinforcements. Physical (density and %porosity) and mechanical (tensile strength, fracture toughness, %elongation, elastic modulus, etc.) properties of composites developed via solidification processing technique were evaluated. The porosity of all the composites falls below the
APA, Harvard, Vancouver, ISO, and other styles
48

Edoziuno, Francis Odikpo, Benjamin Ufuoma Odoni, Francis Ireti Alo, and Cynthia Chinasa Nwaeju. "DRY SLIDING WEAR AND SURFACE MORPHOLOGICAL EXAMINATION OF AN ALUMINIUM MATRIX COMPOSITE REINFORCED WITH PALM KERNEL SHELL." Acta Metallurgica Slovaca 26, no. 2 (2020): 54–62. http://dx.doi.org/10.36547/ams.26.2.537.

Full text
Abstract:
The wear resistance and microstructural features of aluminum AA6063 based composites reinforced with seven different mass fractions of palm kernel shell particles (0, 2.5, 5, 7.5, 10, 12.5 & 15wt%) fabricated by stir-casting, were characterized using pin-on-disk tribometer, optical microscope, and ImageJ package. ImageJ particle analysis revealed both the particle size and shape descriptors for the composites' microstructural features. The average grain sizes of all the composites were higher than that of the unreinforced AA6063 matrix. Wear tests conducted under dry sliding condition show
APA, Harvard, Vancouver, ISO, and other styles
49

Rajiv, Selvam, Karibeeran Shanmuga Sundaram, and Pablo Pasquale. "A Study and Analysis on Electromagnetic Compression Forming Processed Aluminum Alloy Tubes." Advanced Materials Research 337 (September 2011): 560–63. http://dx.doi.org/10.4028/www.scientific.net/amr.337.560.

Full text
Abstract:
Electromagnetic forming is one of the high- rate forming methods that are extensively used to form and join axisymmetric tubes and metal sheet. It is a high speed forming process using a pulsed magnetic field to form work pieces made of metals such as copper or aluminum alloys with high electrical conductivity. In this work, the experimental investigation and mathematical analysis of electromagnetic compression forming of aluminum alloy tubes AA6063 is studied. The aim of the work was to verify the results from MATLAB code with the experimental data. Experiments were conducted on aluminum allo
APA, Harvard, Vancouver, ISO, and other styles
50

Saravanan, V., P. R. Thyla, and S. R. Balakrishnan. "The Dry Sliding Wear of Cenosphere -Aluminium Metal Matrix Composite." Advanced Composites Letters 23, no. 3 (2014): 096369351402300. http://dx.doi.org/10.1177/096369351402300301.

Full text
Abstract:
In today's rapidly developing automobile and aeronautical industries, numerous composites are widely used for various applications. This increases the need for continuous research and development of a number of composites. This research work investigated various volume % of cenosphere reinforced AA6063 composites which were made by stir casting method. These composites were surveilled with the help of chemical analysis and scanning electron microscopy to ensure the distribution and bonding between reinforcement and matrix. The design of experiments (DOE) was used to plan the wear tests and the
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!