Relevant bibliographies by topics / AA7001

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'AA7001'

Author: Grafiati
Published: 5 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'AA7001.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "AA7001"

1

Bai, Qing Ling, Jun Cheng Liu, Yue Li, et al. "Hot Tearing Evaluation and Contraction Behaviors of Four AA7xxx Alloys." Materials Science Forum 817 (April 2015): 21–26. http://dx.doi.org/10.4028/www.scientific.net/msf.817.21.

Full text
Abstract:
The hot tearing susceptibilities (HTS) of some AA7×××alloys, AA7050, AA7055, AA7085 and AA7022 were evaluated with constrained rod casting (CRC). Thermal contraction behaviors during solidification were measured as well in a T-shaped setup. The results showed that alloys with HTS from high to low were AA7055, AA7085, AA7050 and AA7022. Zn content in 7××× aluminum alloys seemed to play a major role with respect to the HTS index. Remarkable differences could be seen on thermal contraction behaviors within solidification range for each alloy. The rate and amount of thermal contraction for AA7055
APA, Harvard, Vancouver, ISO, and other styles
2

Mahdi, Huda Salih, Hussain J. Alalkawi, Muzher T. Mohamed, and Saad T. Faris. "Evaluation of creep-fatigue life and strength for AA7001-T6 under constant amplitude loading." Eastern-European Journal of Enterprise Technologies 4, no. 12 (118) (2022): 22–28. http://dx.doi.org/10.15587/1729-4061.2022.263344.

Full text
Abstract:
Aluminum alloys were widely used in the construction, automotive, marine, and aviation industries due to their low specific strength, ease of manufacture, and low weight. The fatigue behavior of aluminum alloys at different temperatures is investigated. Thanks to the rapid development of armament in recent years, 7XXX ultra-high strength aluminum alloys are now used more frequently because of their non-corrosive qualities and low weight. Aluminum alloy 7001-T6 behavior is examined at the Company State for Engineering, Rehabilitation, and Inspection (SIER) in Iraq, where chemical analysis of th
APA, Harvard, Vancouver, ISO, and other styles
3

Huda S. Mahdi, Hussain J. M. Alalkawi, and Saad T. Faris. "Mechanical Properties and Fatigue Life Evaluation under High Temperature and Shot Peening Application using AA7001." International Journal of Nanoelectronics and Materials (IJNeaM) 16, no. 2 (2024): 421–30. http://dx.doi.org/10.58915/ijneam.v16i2.1246.

Full text
Abstract:
In some applications, AA7001 may be subjected to high temperature and fatigue. This interaction leads to varying the mechanical and fatigue properties of the above alloy. This work deals with the effects of tensile properties and constant fatigue amplitude performance. Aluminum alloys have a low specific strength, are simple to produce, and are lightweight, which has made them popular in the construction, automotive, marine, and aviation industries. The history of stress and temperature applied to the component has a significant impact on the time-dependent process of creep and strain damage.
APA, Harvard, Vancouver, ISO, and other styles
4

Huda, Salih Mahdi, J. Alalkawi Hussain, T. Mohamed Muzher, and T. Faris Saad. "Evaluation of creep-fatigue life and strength for AA7001-T6 under constant amplitude loading." Eastern-European Journal of Enterprise Technologies 4, no. 12 (118) (2022): 22–28. https://doi.org/10.15587/1729-4061.2022.263344.

Full text
Abstract:
Aluminum alloys were widely used in the construction, automotive, marine, and aviation industries due to their low specific strength, ease of manufacture, and low weight. The fatigue behavior of aluminum alloys at different temperatures is investigated. Thanks to the rapid development of armament in recent years, 7XXX ultra-high strength aluminum alloys are now used more frequently because of their non-corrosive qualities and low weight. Aluminum alloy 7001-T6 behavior is examined at the Company State for Engineering, Rehabilitation, and Inspection (SIER) in Iraq, where chemical analysis of th
APA, Harvard, Vancouver, ISO, and other styles
5

Romero-Sánchez, Lilian B., Sara Borrego-González, and Aránzazu Díaz-Cuenca. "High surface area biopolymeric-ceramic scaffolds for hard tissue engineering." Biomedical Physics & Engineering Express 3, no. 3 (2017): 035012. http://dx.doi.org/10.1088/2057-1976/aa7001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hamzah, Asaad Khudhair, Raad M. Abed, Abdulwahab M. AL-Mushehdany, and Hussain Jasim M. Alalkawi. "Fatigue Life Estimation under High Temperature and Variable Loading of AA7001-T6 Using Shot Peening." Tikrit Journal of Engineering Sciences 31, no. 2 (2024): 168–74. http://dx.doi.org/10.25130/tjes.31.2.16.

Full text
Abstract:
In this study, the fatigue life of aluminum alloys (7001-T6) was predicted with shot peening at various temperatures. Surface treatment with shot peening steel balls is a mechanism for reducing damage. An experimental investigation was conducted to find the degree of fatigue accumulation for AA7001-T6 under rotational bending loading and stress ratio R = −1. The experiments were conducted at RT (25 ℃), 330 ℃, and SP + 330 ℃ temperatures. A modified damage stress model that considers damage at various load levels was recommended for forecasting the fatigue life under high temperatures. The mode
APA, Harvard, Vancouver, ISO, and other styles
7

Aseel, A. Alhamdany, Yousuf Khenyab Ali, K. Mohammed Qusay, and Jasim M. Alalkawi Hussain. "Development mechanical and fatigue properties of AA7001 after combined SP with deep cryogenic treatment and UIP with deep cryogenic treatment." Eastern-European Journal of Enterprise Technologies 5, no. 1 (113) (2021): 62–69. https://doi.org/10.15587/1729-4061.2021.243391.

Full text
Abstract:
Al alloys have long been of interest to the aerospace community, due to their modest specific strength, ease of manufacture, and low cost. In recent years, with the rapid development of weaponry, 7XXX ultra-high strength aluminum alloys used increasingly in military fields. Chemical analysis of the AA 7001 is supported out at The Company State for Engineering, Rehabilitation and Inspection (SIER) in Iraq. Strengthening the surface (shot penning) is beneficial to delay crack nucleation and extend life. The test samples (tensile and fatigue) are subject to the SP process by using ball steel with
APA, Harvard, Vancouver, ISO, and other styles
8

Alhamdany, Aseel A., Ali Yousuf Khenyab, Qusay K. Mohammed, and Hussain Jasim M. Alalkawi. "Development mechanical and fatigue properties of AA7001 after combined SP with deep cryogenic treatment and UIP with deep cryogenic treatment." Eastern-European Journal of Enterprise Technologies 5, no. 1(113) (2021): 62–69. http://dx.doi.org/10.15587/1729-4061.2021.243391.

Full text
Abstract:
Al alloys have long been of interest to the aerospace community, due to their modest specific strength, ease of manufacture, and low cost. In recent years, with the rapid development of weaponry, 7XXX ultra-high strength aluminum alloys used increasingly in military fields. Chemical analysis of the AA 7001 is supported out at The Company State for Engineering, Rehabilitation and Inspection (SIER) in Iraq. Strengthening the surface (shot penning) is beneficial to delay crack nucleation and extend life. The test samples (tensile and fatigue) are subject to the SP process by using ball steel with
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Chun Mei, Zhi Qian Chen, Su Min Zeng, Nan Pu Cheng, Zhen Hua Geng, and Quan Li. "Effect of Stepped Solution Treatment on Microstructure and Properties of AA7085 Aluminum Alloy." Advanced Materials Research 239-242 (May 2011): 786–92. http://dx.doi.org/10.4028/www.scientific.net/amr.239-242.786.

Full text
Abstract:
The effect of stepped solution treatment on the mechanical properties and the microstructure of AA7085 have been investigated compared to AA7050. Optical and electron microscopy observation and electron probe microanalysis were used to analyze the microstructure and tensile fracture surface of AA7085 and AA7050 processed via various treatment schedules. Besides, X-ray diffractometer and differential scanning calorimeter were used to seek the differences of microstructure characters between AA7085 and AA7050. The results indicate that higher content of Zn along with lower content of Mg and Cu a
APA, Harvard, Vancouver, ISO, and other styles
10

Shah, Zahir, Narcisa Vrinceanu, Muhammad Rooman, Wejdan Deebani, and Meshal Shutaywi. "Mathematical Modelling of Ree-Eyring Nanofluid Using Koo-Kleinstreuer and Cattaneo-Christov Models on Chemically Reactive AA7072-AA7075 Alloys over a Magnetic Dipole Stretching Surface." Coatings 12, no. 3 (2022): 391. http://dx.doi.org/10.3390/coatings12030391.

Full text
Abstract:
In the current study, since nanofluids have a high thermal resistance, and because non-Newtonian (Ree-Eyring) fluid movement on a stretching sheet by means of suspended nanoparticles AA7072-AA7075 is used, the proposed mathematical model takes into account the influence of magnetic dipoles and the Koo-Kleinstreuer model. The Cattaneo-Christov model is used to calculate heat transfer in a two-dimensional flow of Ree-Eyring nanofluid across a stretching sheet, and viscous dissipation is taken into account. The base liquid water with suspended nanoparticles AA7072-AA7075 is considered in this stu
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "AA7001"

1

Torres, Luis Vanderlei 1983. "Avaliação da tixoconformabilidade das ligas AA7075 a AA7004." [s.n.], 2009. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263947.

Full text
Abstract:
Orientador: Eugenio Jose Zoqui<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica<br>Made available in DSpace on 2018-08-13T23:53:31Z (GMT). No. of bitstreams: 1 Torres_LuisVanderlei_M.pdf: 3703013 bytes, checksum: 7115a237d824f9b55bed6bdf9f41d383 (MD5) Previous issue date: 2009<br>Mestrado<br>Materiais e Processos de Fabricação<br>Mestre em Engenharia Mecânica
APA, Harvard, Vancouver, ISO, and other styles
2

Andersson, Nils-Eric. "Structure and properties of thick plate and near surface properties after high speed machining af AA7010 /." Linköping : Univ, 2003. http://www.bibl.liu.se/liupubl/disp/disp2003/tek822s.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Morton, Sean C. "Atmospheric Pitting Corrosion of AA7075-T6 Under Evaporating Droplets." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1367585533.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sun, Tianzhu. "Residual stress development in AA7050 stationary shoulder friction stir welds." Thesis, University of Manchester, 2018. https://www.research.manchester.ac.uk/portal/en/theses/residual-stress-development-in-aa7050-stationary-shoulder-friction-stir-welds(9c4066c2-f3cf-4a3d-bfd0-3f6842de1251).html.

Full text
Abstract:
Stationary shoulder friction stir welding (SSFSW) is a recently developed variant of conventional friction stir welding (FSW). Recent studies have shown that SSFSW can join high strength aluminum alloys with improved mechanical strength and reduced distortion as a result of a narrower and more uniform thermal profile. However, a lack of understanding on the residual stress development in the SSFSW process makes it difficult to assess the structural integrity and delays a widespread application of this technique to industry. This dissertation reports the first systematic investigation into the
APA, Harvard, Vancouver, ISO, and other styles
5

Thomson, Mark S. "Atmospheric Pitting Corrosion Studies of AA7075-T6 Under Electrolyte Droplets." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1461232785.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rêgo, Galtiere Corrêa. "Produção e caracterização de revestimentos híbridos a base de sílica e titânia por sol-gel no aço AISI 1045 e na liga de alumínio AA7075." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/18/18158/tde-12092016-110501/.

Full text
Abstract:
O uso de revestimentos protetores consiste na alternativa mais utilizada para a eliminação ou diminuição dos processos corrosivos nos aços, bem como no alumínio e suas ligas, que apresentam uma ampla gama de aplicações, principalmente na indústria aeronáutica, devido à alta razão resistência/peso e, cujas vidas úteis podem ser comprometidas pela corrosão. Neste trabalho foram produzidos revestimentos a base de sílica e titânia obtidos pelo processo sol-gel em substratos constituídos de aço AISI 1045 e liga de alumínio AA7075, para a proteção à corrosão em ambiente salino. As amostras foram rev
APA, Harvard, Vancouver, ISO, and other styles
7

Younis, Ahmed. "Protection of Aluminum Alloy (AA7075) from Corrosion by Sol-Gel Technique." Doctoral thesis, Universitätsbibliothek Chemnitz, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-83230.

Full text
Abstract:
Die vorliegende Arbeit beschäftigt sich mit der Entwicklung von Sol-Gel-Beschichtungen durch Optimierung der Ausgangszusammensetzung und der Applikations-Parameter für den Korrosionsschutz der Aluminium-Legierung AA7075. Verschiedene Arten von Silanen, z. B. Tetraethoxysilan (TEOS), Phenyltriethoxysilan (PTES) und Phenyltrim­ethoxysilan (PTMS) sind verglichen worden: Der Sol-Gel-Film aus PTMS präpariert, weist dabei die höchste Hydrophobizität auf, was sich insbesondere in den Barriere-Eigenschaften dieser Verbindung zeigte. Die Wirkung von Essigsäure als Katalysator in Sol-Gel-Prozessen wurde
APA, Harvard, Vancouver, ISO, and other styles
8

Cavanaugh, Mary Katherine. "Modeling the Environmental Dependence of Localized Corrosion Evolution in AA7075-T651." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1259702063.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dalai, Biswajit. "Material characterization of AA7075-T651 deformed at different temperatures and strain rates." Licentiate thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-84325.

Full text
Abstract:
In this licentiate thesis, the mechanical response and the microstructure evolution in aluminum alloy (AA) 7075 in its T651 heat treated state have been studied through mechanical tests at varied conditions of strain rate and temperature. First, compression tests were performed on AA7075-T651 samples at room temperature (RT), 100, 200, 300, 400 and 500 °C (melting temperature of AA7075 is ~635 °C) with two comparatively low strain rates of 0.01 and 1 s-1 using a Gleeble thermo-mechanical simulator. The effects of softening mechanisms, such as adiabatic heating, dynamic recovery (DRV) and dynam
APA, Harvard, Vancouver, ISO, and other styles
10

Feltrin, José Vanderlei. "Obtenção e caracterização de estruturas reofundidas e tixofundidas da liga de alumínio AA7075." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2004. http://hdl.handle.net/10183/5708.

Full text
Abstract:
A obtenção de ligas metálicas em forma de pasta, com propriedades tixotrópicas apropriadas para serem utilizadas em processos de tixoconformação, pode ser realizada através de vários processos metalúrgicos. Destacam-se os processos de reofundidos obtidos a partir do líquido com a agitação mecânica do banho, ao longo da solidificação. Esses processos utilizam-se de rotores e propulsores, agitação mecânica usando o processo de duplo-parafuso e a agitação magneto hidrodinâmica. Outros procedimentos para a obtenção de pastas reofundidas a partir do líquido são o processo SCR (Shearing Cooling Roll
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "AA7001"

1

Brigance. Victory Teachers Guide Grade Five (Aa7043). Linguisystems, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Brigance. Victory Teachers Guide Grade Three (Aa7033). Linguisystems, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "AA7001"

1

Wang, Tianzhao, Yong Chae Lim, Sammy Ojo, and Zhili Feng. "Friction Self-piercing Riveting Process for 3T Configuration of AA7075-AA7075-AA6022." In The Minerals, Metals & Materials Series. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-80896-8_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Roth, Manuel. "Untersuchungen zu Aluminium AA7020-T651." In Zur Berechnung von Bauteilen in hybrider Bauweise unter ballistischer Beanspruchung. Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-54686-4_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dobra, Gheorghe, Ioan Sava, Marin Petre, and Gheorghe Popa. "The Optimization of the Homogenization Treatment of AA7075." In Light Metals 2017. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51541-0_42.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rader, Katherine E., Matthew B. Schick, Jon T. Carter, Louis G. Hector, and Eric M. Taleff. "Conditions for Retrogression Forming Aluminum AA7075-T6 Sheet." In Light Metals 2019. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05864-7_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sharma, Chaitanya, D. K. Dwivedi, and P. Kumar. "Friction Stir Welding of Al- Zn- Mg Alloy AA7039." In Light Metals 2012. Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48179-1_85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Klenosky, Daniel R., David R. Johnson, Srinivasan Chandrasekar, and Kevin P. Trumble. "Characterization of Large Strain Extrusion Machining (LSEM) of AA7050." In Light Metals 2017. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51541-0_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nathan, D., S. Ashwin Kannan, and P. Krishna Kumar. "Feasibility Study of TIG Welding of AA6063-AA7075 Alloys." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4745-4_63.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sharma, Chaitanya, D. K. Dwivedi, and P. Kumar. "Friction Stir Welding of Al-Zn-Mg Alloy AA7039." In Light Metals 2012. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118359259.ch85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Varma, N. R. Karthik, Neeraj K. Namboodiri, Sandeep Justin, S. Sreegovind, and K. Manoj Kumar. "Corrosion Studies on AA7075-T7352 Alloys Under Adverse Environments." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4571-7_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Khanh, Nguyen Lam, and Nguyen Van Cuong. "Multi-objective Optimization of AA7075 Aluminum Alloy Drilling Process." In Advances in Engineering Research and Application. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92574-1_64.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "AA7001"

1

Connolly, Brian J., Michelle G. Koul, and Angela L. Moran. "A Comparison Study of Stress Corrosion Crack Growth Rates for AA7XXX Alloys as a Function of Bulk Aqueous Chloride Concentrations and Simulated Crack Tip Chemistries." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03515.

Full text
Abstract:
Abstract Various alloys are being considered for drop-in replacement and refurbishment of corrosion and stress corrosion cracking prone AA7075-T6 (UNS A97075) components on aging military aircraft. This project evaluates three candidate aluminum alloys that meet mechanical property requirements and are thought to be superior to AA7075-T6 in terms of corrosion performance. The three alloys tested include AA7150-T7751 (UNS A97150), AA7249-T76511, and AA7040-T7651. Environmentally assisted crack growth rates for these alloys were documented and compared to those of AA7075-T6 and AA7075-T73 in var
APA, Harvard, Vancouver, ISO, and other styles
2

Deffenbaugh, Kristen L., Michelle G. Koul, and Angela L. Moran. "Environmentally Assisted Cracking Properties of AA7249 Extrusions for Aerospace Applications." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03211.

Full text
Abstract:
Abstract Two candidate replacement alloys are being considered as possible drop-in replacements for A7075-T6 extruded components on the P-3C aircraft (AA7150 and AA7249). Preliminary evaluation indicates that these alloys exhibit improved corrosion resistance without a sacrifice in strength. This paper describes an experimental program that contributes to the body of knowledge required to safely employ AA7249 in lieu of AA7075-T6. This study examines three extrusions and compares the mechanical and EAC properties of each.
APA, Harvard, Vancouver, ISO, and other styles
3

Crum, J. R., P. O. Wakeling, S. K. Mannan, and J. McEwen. "Corrosion Resistance of a High Strength Al-Mg-Li Mechanically Alloyed Material." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92158.

Full text
Abstract:
Abstract Mechanical alloying produces aluminum alloys having improved homogeneity and an ultra fine grain size compared to conventional ingot metallurgy alloys. This contributes to excellent localized corrosion resistance. The beneficial effects of a highly homogeneous, fine grained microstructure and a special heat treatment have been combined in mechanically alloyed IncoMAP alloy AL-905XL* (Al-4Mg-1.3Li) to produce a material with very good resistance to stress corrosion cracking. Laboratory and seacoast exposure data are presented. In addition to good corrosion resistance, this alloy has me
APA, Harvard, Vancouver, ISO, and other styles
4

Borth, David J., Douglas C. Hansen, and Gregory Wolters. "Corrosion Severity Comparison of Three Beach Sites." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17668.

Full text
Abstract:
Abstract A comprehensive corrosion study was conducted over a period of twelve months at three exposure sites along the Florida coast: Daytona Beach, Kennedy Space Center (KSC), and the US Naval Research Laboratory, Key West. The long-term goal was to develop a better method to categorize the environmental severity of the exposure sites in terms of corrosion attack, which will aid in the design of accelerated laboratory testing and lifetime prediction for bare metal substrates in coastal environments. Measurements included site-specific weather parameters, mass loss of 1018 steel, and pitting
APA, Harvard, Vancouver, ISO, and other styles
5

Racicot, R. J., S. C. Yang, and R. Brown. "Corrosion Protection Comparison of a Chromate Conversion Coating to a Novel Conductive Polymer Coating on Aluminum Alloys." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97531.

Full text
Abstract:
Abstract Comparisons of the corrosion resistance performance of a novel polyaniline based double strand conductive polymer coating versus a chromate conversion coating on two aluminum alloys were made. Potentiodynamic scans, electrochemical impedance spectroscopy (EIS) in 0.5N NaCl solutions and ASTM B-117 salt spray tests were performed on coated samples of AA7075-T6 and AA2024-T3 aluminum alloys. Results show the conductive polymer film offers, at the least, an equivalent protection performance as the chromate coating with a two order of magnitude reduction in corrosion current densities in
APA, Harvard, Vancouver, ISO, and other styles
6

Harrison, Nia R., S. George Luckey, Breana Cappuccilli, and Ghassan Kridli. "Paint Bake Influence on AA7075 and AA7085." In WCX™ 17: SAE World Congress Experience. SAE International, 2017. http://dx.doi.org/10.4271/2017-01-1265.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nguyen, Thanh-Cong, Quang-Cherng Hsu, and Tat-Tai Truong. "Modeling and Simulation of 7000-Series Aluminum Extrusion Process for Complex Curtain Structure Profile." In ASME 2024 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/imece2024-143348.

Full text
Abstract:
Abstract The extensive range of applications for aluminum alloys in the 7000 series is linked to their excellent mechanical properties; however, this also restricts their formability, especially with the extrusion process. Practical extrusion die design depends on the traditional “test-and-revise” process to cover all the complicated influence factors, which costs a lot of time and resources. Recently, researchers have investigated the aluminum extrusion process by applying simulation software to overcome those challenges. This study aims to utilize different approaches to virtual simulations,
APA, Harvard, Vancouver, ISO, and other styles
8

Дудина, М. А., С. А. Догадин, А. А. Савченко, А. Г. Борисов, В. Д. Беленюк та Д. В. Фомина. "ОСОБЕННОСТИ ДИФФЕРЕНЦИРОВКИ РЕГУЛЯТОРНЫХ Т-КЛЕТОК КРОВИ У ПАЦИЕНТОВ С БОЛЕЗНЬЮ ГРЕЙВСА ПОСЛЕ РАДИОНУКЛИДНОГО ЛЕЧЕНИЯ". У X (XXIX) НАЦИОНАЛЬНЫЙ КОНГРЕСС ЭНДОКРИНОЛОГОВ с международным участием «Персонализированная медицина и практическое здравоохранение». ФГБУ «НМИЦ эндокринологии» Минздрава России, 2023. http://dx.doi.org/10.14341/cong23-26.05.23-185.

Full text
Abstract:
ЦЕЛЬ: изучить особенности дифференцировки регуляторных Т-клеток (Treg) крови у пациентов с болезнью Грейвса (БГ) после радионуклидного лечения.&#x0D; МАТЕРИАЛЫ И МЕТОДЫ: определение содержания тиреоидных гормонов осуществлялось методом&#x0D; хемилюминесцентного иммуноанализа на автоматическом анализаторе Architecti1000sr (Abbott Diagnostics,&#x0D; США). Исследование фенотипа Treg проводили методом проточной цитометрии с использованием прямой иммунофлуоресценции цельной периферической крови с применением моноклональных антител&#x0D; (BeckmanCoulter, USA), меченных FITC (fluoresceinisothiocyanat
APA, Harvard, Vancouver, ISO, and other styles
9

HAN, Chenyang. "Solid state recycling operations for AA7075." In Metal Forming 2024. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903254-22.

Full text
Abstract:
Abstract. Solid-state recycling offers a sustainable solution characterized by low energy consumption and heightened product efficiency compared to conventional melting-based methods. Among these, Friction Stir Extrusion processes emerge as an innovative and promising category within solid-state recycling, showcasing the ability to directly repurpose machining chips into solid products. However, as these processes primarily yield semi-finished products -typically in the form of wires, rods, or small billets- subsequent post-recycling forming processes become imperative for achieving net-shape
APA, Harvard, Vancouver, ISO, and other styles
10

"Modelirovanie razrusheniya pregrady iz anizotropnogo alyuminievogo splava aa7010-t6 pri dinamicheskom nagruzhenii." In Perspektivnye materialy s ierarkhicheskoy strukturoy dlya novykh tekhnologiy i nadezhnykh konstruktsiy, Khimiya nefti i gaza. Tomsk State University, 2018. http://dx.doi.org/10.17223/9785946217408/229.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "AA7001"

1

Brehm, Johnathon, Jessica Buckner, Christina Profazi, and Alex Hickman. Incipient Melting in AA7075. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1876952.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Koul, Michelle G. Rising Step Load Testing of AA7085-T7452. Defense Technical Information Center, 2007. http://dx.doi.org/10.21236/ada521059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Prevey, Paul S., and John T. Cammett. Restoring Fatigue Performance of Corrosion Damaged Aa7075-T6 and Fretting in 4340 Steel with Low Plasticity Burnishing. Defense Technical Information Center, 2002. http://dx.doi.org/10.21236/ada444606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'AA7001' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography