To see the other types of publications on this topic, follow the link: Abrasive grinding.

Journal articles on the topic 'Abrasive grinding'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Abrasive grinding.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Liao, Zhi Jie, Mu Xiao, Hai Yan Wu, Feng Xia, Ying Chen, and J. Z. Xiao. "Effect of t-ZrO2 Content on Grinding Performance of Fused Zirconia Alumina Abrasive." Advanced Materials Research 873 (December 2013): 431–35. http://dx.doi.org/10.4028/www.scientific.net/amr.873.431.

Full text
Abstract:
Fused zirconia alumina has been broadly applied in abrasive industry due to its excellent strength and toughness. The aim of the present work is to investigate the effect of t-ZrO2 content on grinding performance of fused zirconia alumina. Commercial fused alumina zirconia (ZA25) powder was used to fabricate the particle size of 380-830 μm abrasive samples for grinding experiment by pressure granulation and sintering at different temperatures. Phase identification of abrasives sintered at different temperatures was made by X-ray diffractometry and the correlations between t-ZrO2 content and gr
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Huali, Minghui Zhang, Jicai Kuai, and Dmitrii V. Ardashev. "ELID Dressing Behaviors of Non-Abrasive Iron-Based Grinding Wheels." Applied Sciences 13, no. 19 (2023): 11047. http://dx.doi.org/10.3390/app131911047.

Full text
Abstract:
Non-abrasive iron-based grinding diamond wheels, lacking abrasive particles, negate the concern of detached passivated abrasives scratching the polished surface. During the Electrolytic In-Process Dressing (ELID) polishing process, α-Fe2O3 particles form on the oxide film surface of the iron-based grinding diamond wheel devoid of abrasives. These particles assume the role of the grinding diamond wheel for polishing. Therefore, the ELID electrolytic performance and the oxide film formation performance of the non-abrasive iron-based grinding diamond wheel significantly influence the formation of
APA, Harvard, Vancouver, ISO, and other styles
3

Wu, Hai Long, Yun Huang, Zhi Huang, and G. J. Cheng. "Experimental Research on the Abrasive Belt Grinding Turbine Blades Material 1Cr13 Stainless Steel." Key Engineering Materials 487 (July 2011): 452–56. http://dx.doi.org/10.4028/www.scientific.net/kem.487.452.

Full text
Abstract:
Blades are the key parts of the turbine, which usually use materials such as 1Cr13 stainless steel. These materials are of high strength, great toughness, and good thermo hardening, but the process is difficult. Abrasive belt grinding has good grinding performance. Grinding tests of three kinds of abrasive belts were carried out on 1Cr13 stainless steel; the relationship between the material removal rate and the species, such as abrasive belt type, belt speed, the normal grinding force, and grinding fluid, was studied; after the belt grinding, the microscopic morphology of the surface was anal
APA, Harvard, Vancouver, ISO, and other styles
4

Xiao, G. J., Y. Huang, R. K. Cheng, and Y. Lu. "Experimental Research on the Mathematical Model of Abrasion Ratio Based on the Abrasive Belt Grinding." Applied Mechanics and Materials 328 (June 2013): 480–85. http://dx.doi.org/10.4028/www.scientific.net/amm.328.480.

Full text
Abstract:
Abrasion ratio is an important parameter to estimate the wear resistance of abrasive belt grinding, reacting the relationship between the material removal and the abrasive belt wear, and also, its value is an important basis to instruct the process of abrasive belt grinding. The mathematical model of material removal is obtained by analyzing the basic mechanism theory of centerless cylindrical grinding in this paper, and the impact curve which react the relationship between the abrasion ration and the material removal or cutting depth is obtained by using the software of Mathematica. The abras
APA, Harvard, Vancouver, ISO, and other styles
5

Kang, Ren Ke, Shang Gao, Zhu Ji Jin, and Dong Ming Guo. "Study on Grinding Performance of Soft Abrasive Wheel for Silicon Wafer." Key Engineering Materials 416 (September 2009): 529–34. http://dx.doi.org/10.4028/www.scientific.net/kem.416.529.

Full text
Abstract:
With the development of IC manufacturing technology, the machining precision and surface quality of silicon wafer are proposed much higher, but now the planarization techniques of silicon wafer using free abrasive and bonded abrasive have the disadvantage of poor profile accuracy, environmental pollution, deep damage layer, etc. A soft abrasive wheel combining chemical and medical effect was developed in this paper, it could get super smooth, low damage wafer surface by utilizing mechanical friction of abrasives and chemical reaction among abrasives, additives, silicon. A comparison experiment
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, G. Z., and Jiang Han. "Study on Honing Mechanism of Gear Surface Using an Internal Honing Wheel Based on Single-Particle Abrasive." Key Engineering Materials 764 (February 2018): 235–44. http://dx.doi.org/10.4028/www.scientific.net/kem.764.235.

Full text
Abstract:
Based on geometry model of single abrasive particle, comparing abrasive geometries of different materials displayed in SEM images, it is proposed that abrasive geometry is similar to inverted cone with vertex radius in sphere. Based on abrasives with inverted cone geometry, through introducing sliding ratio, mathematical models of cutting force and specific grinding energy of single abrasive have been established to study about cutting force in meshing line of single abrasive; in accordance with specific grinding energy of single abrasive, combined with internal meshing principle, the relation
APA, Harvard, Vancouver, ISO, and other styles
7

Lu, Jia Bin, Qiu Sheng Yan, Hong Tian, and Wei Qiang Gao. "Effect of Abrasive on the Machining Performance the EMR-Effect-Based Tiny-Grinding Wheel." Advanced Materials Research 135 (October 2010): 24–29. http://dx.doi.org/10.4028/www.scientific.net/amr.135.24.

Full text
Abstract:
Based on the electro-magneto-rheological (EMR) effect, the Fe3O4-based EMR fluid dispersed with micron-sized finishing abrasives is used as a polishing fluid to form a dynamical tiny-grinding wheel under an electro-magnetically coupled field. Using this EMR-effect-based tiny-grinding wheel, experiments were conducted to investigate the effect of the grain size, content and material of abrasive on material removal effect of normal glass. Results indicate that the abrasive can change the chain-like structure of the EMR-effect-based tiny-grinding wheel and influence the material removal ability o
APA, Harvard, Vancouver, ISO, and other styles
8

Kim, T. W., Sang Hoon Hyun, Joo Sun Kim, Jong Ho Lee, and Hae Won Lee. "Fabrication of Nanoabrasive Grinding Wheels and Their Application to Grinding Silicon Wafers." Key Engineering Materials 317-318 (August 2006): 373–76. http://dx.doi.org/10.4028/www.scientific.net/kem.317-318.373.

Full text
Abstract:
In the surface machining of brittle materials, there exists a transition from brittle to ductile modes when the depth of cut is reduced below a critical size using ultrafine abrasive grains. Vitrified grinding wheels containing ultrafine abrasives in the sub-micrometer to nanometer range were fabricated by mechanochemically milling nanoabrasive particles and subsequent viscous sintering of abrasive-binder composites. The grinding characteristics of the nanoabrasive grinding wheels were evaluated for the fine grinding of silicon wafers in terms of a variety of variables. Preliminary wafer grind
APA, Harvard, Vancouver, ISO, and other styles
9

Godino, Leire, Iñigo Pombo, Jose Sanchez, and Borja Izquierdo. "An Original Tribometer to Analyze the Behavior of Abrasive Grains in the Grinding Process." Metals 8, no. 7 (2018): 557. http://dx.doi.org/10.3390/met8070557.

Full text
Abstract:
Manufacturing of grinding wheels is continuously adapting to new industrial requirements. New abrasives and new wheel configurations, together with wheel wear control allow for grinding process optimization. However, the wear behavior of the new abrasive materials is not usually studied from a scientific point of view due to the difficulty to control and monitor all the variables affecting the tribochemical wear mechanisms. In this work, an original design of pin-on-disk tribometer is developed in a CNC (Computer Numerical Control) grinding machine. An Alumina grinding wheel with special chara
APA, Harvard, Vancouver, ISO, and other styles
10

Magstr., Jumaniyazov Abror Ergash o'g'li, and rahbar: t.f.f.d. (PhD) Narmatov Elmurod Avazovich Ilmiy. "IMPROVING THE EFFICIENCY OF THE GRINDING PROCESS BY CHANGING THE STRUCTURAL CHARACTERISTICS OF THE ABRASIVE TOOL." International journal of advanced research in education, technology and management 2, no. 4 (2023): 63–74. https://doi.org/10.5281/zenodo.7840005.

Full text
Abstract:
Based on experimental and analytical studies, it was found that the efficiency of the grinding process depends on the grain composition and the content of the main fraction in it. Grain compositions of abrasive materials produced by domestic manufacturers are regulated by standards and regulations. According to them, each grain composition of abrasives consists, as a rule, of five fractions. Statistical processing and analysis of more than 80 different grain compositions of abrasive materials allowed us to establish regularities in measuring the percentage of individual fractions from the gran
APA, Harvard, Vancouver, ISO, and other styles
11

Zhao, Zheng Cai, Jiu Hua Xu, Yu Can Fu, and Zhi Wei Zhang. "Creep Feed Grinding of Ni-Based Superalloy with Micro-Crystalline Ceramic Alumina Wheels." Advanced Materials Research 797 (September 2013): 511–15. http://dx.doi.org/10.4028/www.scientific.net/amr.797.511.

Full text
Abstract:
This article studies the performance of ceramic grinding wheel made of micro-crystalline alumina in the creep feed grinding of nickel-based superalloy Inconel 718. The effects of abrasives and specific pore volume on the performance of wheels are experimentally discussed. Grinding force and temperature were measured and analyzed during grinding tests. The surface roughness was used to describe the quality of ground surfaces. The results indicate that the micro-crystalline alumina SG abrasive wheel with large specific volume has good grinding properties when grinding Inconel 718 in comparison o
APA, Harvard, Vancouver, ISO, and other styles
12

Pavloušková, Zina, David Jech, Pavel Komarov, et al. "Characterization of High-Speed Alumina Abrasive Grinding Wheel." Defect and Diffusion Forum 405 (November 2020): 365–69. http://dx.doi.org/10.4028/www.scientific.net/ddf.405.365.

Full text
Abstract:
The high-speed grinding wheel can be defined as a self-sharpening composite structural tool composed from abrasive grains held in a specific binder. The main properties of grinding wheels depend on the type of abrasive elements, grit size, grade, binder and the resulting structure, which is influenced by several crucial technological processing steps. Preparation of an initial mixture of abrasive particles together with permanent binder’s mixture and temporary binder followed by pressing and high-temperature sintering is the essential technological step in the manufacturing of high-quality gri
APA, Harvard, Vancouver, ISO, and other styles
13

Cui, Z. M., Y. G. Han, J. P. Kong, and Q. Q. Chen. "Experimental Study on a New Combination Processing Technology of Polycrystalline Diamond." Advanced Materials Research 797 (September 2013): 491–94. http://dx.doi.org/10.4028/www.scientific.net/amr.797.491.

Full text
Abstract:
Polycrystalline diamond compacts (PCD) has high hardness, good anti abrasion property. The precision processing technology of PCD is key technology in applications. This article introduces a new combination machining method of polycrystalline diamond (PCD). This machining method combines diffusion machining with free abrasive milling. In the processing polycrystalline diamonds in PCD were removed by the diffusing; binders in PCD were removed by grinding. The two main factors in the processing were described. The results of the experiment indicate that grinding speed, abrasives particle - size
APA, Harvard, Vancouver, ISO, and other styles
14

Obikawa, Toshiyuki, and J. Shinozuka. "Analysis of Grinding Temperature Considering Surface Generation Mechanism." Key Engineering Materials 291-292 (August 2005): 97–102. http://dx.doi.org/10.4028/www.scientific.net/kem.291-292.97.

Full text
Abstract:
Grinding temperature was analyzed considering heat generation by cutting with each abrasive on the wheel working periphery. A geometrical analysis of interference between the abrasives and workpiece gave the instantaneous cutting cross section, and visualized the surface topography generated by the time. Using the specific grinding energy and the instantaneous cutting cross sections, the instantaneous distribution of heat generation on the wheel-workpiece contact area was obtained. Then grinding temperature was calculated for a given heat partition into the workpiece. Since a cutting with an a
APA, Harvard, Vancouver, ISO, and other styles
15

Kacalak, Wojciech, Dariusz Lipiński, Filip Szafraniec, Michał Wieczorowski, and Paweł Twardowski. "Technological Aspects of Variation in Process Characteristics and Tool Condition in Grinding Process Diagnostics." Materials 16, no. 4 (2023): 1493. http://dx.doi.org/10.3390/ma16041493.

Full text
Abstract:
The article presents the technological aspects of the diagnostics of grinding processes. The main features of the grinding process and their importance in diagnostic issues are discussed. Selected issues of research and assessment of the condition of the active surface of grinding wheels are presented. The authors pointed out that the parameters used to assess the topography of the ground surfaces do not have sufficient possibilities to differentiate the surface condition of the grinding wheels. This publication draws attention to the possibility of using new dedicated parameters to assess the
APA, Harvard, Vancouver, ISO, and other styles
16

Luo, Zhong Ping, and Ya Lin Yao. "A Study on the Methods for Precise Sorting of Synthetic Diamond Abrasives." Key Engineering Materials 304-305 (February 2006): 66–70. http://dx.doi.org/10.4028/www.scientific.net/kem.304-305.66.

Full text
Abstract:
In an abrasive tool the abrasive is the main part undertaking grinding work, thus, the grinding effects mainly depend on the types and properties of the abrasive. The strength and fracture property of the abrasive grain in a synthetic diamond abrasive tool have a direct influence on the operational performance of the tool. Generally, it is expected that the strength and protrusion height of the grain are as same as possible. The strength and fragmenting property of the abrasive grain hinge on its crystal shape and regularity and completeness, internal vice, impurity content and impurity distri
APA, Harvard, Vancouver, ISO, and other styles
17

Zhang, Die, Yun Huang, Xian Yin, Li Qi Zhou, Yu Hang Yang, and Lu Yong. "Experiment Research on ZrO2 Engineering Ceramics with Abrasive Belt Grinding." Advanced Materials Research 1017 (September 2014): 92–97. http://dx.doi.org/10.4028/www.scientific.net/amr.1017.92.

Full text
Abstract:
Abrasive belt grinding experiments of ZrO2Engineering Ceramics are carried out by using 4 different abrasive belts. The orthogonal test with zirconia-corundum belt was to get the best grinding parameter, the amount of material removal workpiece surface roughness and belt wear were measured to get the best grinding parameter.In this paper,the influence of abrasive belt granularity and different grinding parameters to grinding efficiency and workpiece surface quality throughout the process of grinding ZrO2Engineering Ceramics was analyzed. Analysis wear mechanism of engineering ceramics based on
APA, Harvard, Vancouver, ISO, and other styles
18

Zhang, Shan, Yu Shan Lu, Jun Wang, Fei Ma, Zhi Zhen Liu, and Long Xiang. "An Experimental Investigation on the Grinding Force of the Electroplating CBN Grinding Wheel with Abrasive Ordering Pattern." Applied Mechanics and Materials 687-691 (November 2014): 534–37. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.534.

Full text
Abstract:
In order to obtain the effects of abrasive configurations on the grinding force of superhard abrasive grinding wheel, an experiment was carried out, which grinds steel material by the use of electroplating CBN grinding wheel with different abrasive configurations, mainly including disordered, phyllotactic, matrix and dislocation configurations. The results show that under the experiment conditions, the grinding force of each grinding wheel will increase with the grinding parameters, the grinding force is smaller by the grinding wheel with orderly configurations than disordered configurations a
APA, Harvard, Vancouver, ISO, and other styles
19

Gusakova, Liana. "ABRASIVE DISC IMPREGNATION." Bulletin of Bryansk state technical university 2019, no. 12 (2019): 13–20. http://dx.doi.org/10.30987/1999-8775-2019-2019-12-13-20.

Full text
Abstract:
In order to solve the problems of the effectiveness increase in parts machining with grinding there are developed impregnated abrasive discs. The impregnated grinding disc application allows increasing effectiveness, intensifying a process, increasing surface smoothness with minimum defects as compared with non-impregnated disc grinding. 
 The investigations of grinding processes were based on the regulations of the theory of friction and wear, theory of cutting, physical-chemical mechanics of materials, physical and colloid chemistry, non-equilibrium thermodynamics. 
 Physical-chemi
APA, Harvard, Vancouver, ISO, and other styles
20

Suzuki, Hirofumi, and Kazuhito Ohashi. "Special Issue on Advanced Abrasive Process Technologies." International Journal of Automation Technology 13, no. 6 (2019): 721. http://dx.doi.org/10.20965/ijat.2019.p0721.

Full text
Abstract:
The demand for high-precision and high-efficiency machining of hard ceramics such as silicon carbide (SiC) for semiconductors and hardened steel for molding dies has significantly increased for power devices in automobiles, optical devices, and medical devices. Certain types of hard metals can be machined by deterministic precision-cutting processes. However, hard and brittle ceramics, hardened steel for molds, or semiconductor materials have to be machined by precision abrasive technologies such as grinding, polishing, and ultrasonic vibration technologies with diamond super abrasives. The ma
APA, Harvard, Vancouver, ISO, and other styles
21

Yamada, Takazo, Kazuhito Ohashi, Hirofumi Suzuki, and Akinori Yui. "Special Issue on High Performance Abrasive Technologies." International Journal of Automation Technology 16, no. 1 (2022): 3–4. http://dx.doi.org/10.20965/ijat.2022.p0003.

Full text
Abstract:
Demand for the high-precision and high-efficiency machining of hard ceramics, such as silicon carbide for semiconductors and hardened steel for molding dies, has significantly increased for optical and medical devices as well as for powered devices in automobiles. Certain types of hard metals can be machined by deterministic precision-cutting processes. However, hard and brittle ceramics, hardened steel for molds, and semiconductor materials have to be machined using precision abrasive technologies, such as grinding, polishing, and ultrasonic vibration technologies that use diamond super abras
APA, Harvard, Vancouver, ISO, and other styles
22

Alekseyev, N. S., S. V. Ivanov, Ye A. Boyko, and V. A. Kaporin. "Choosing abrasive materials for the grinding of iron-based plasma coatings." Traktory i sel hozmashiny 79, no. 2 (2012): 51–55. http://dx.doi.org/10.17816/0321-4443-69406.

Full text
Abstract:
Test results of wear resistance of some abrasive grains made of different abrasive materials during the microcutting of plasma coating and hardened steel 45 are published. As a result of given research the most wear resistant abrasives during the microcutting of specified materials have been found out. Electronic-microscopic and micro-X-ray spectral research of working surfaces of isolated grains allowed to reveal the physical and chemical processes in contact between abrasive and metal, and also to establish the adhesion activity of abrasive materials related to the plasma coating.
APA, Harvard, Vancouver, ISO, and other styles
23

Lu, Yu Shan, Cheng Yi Zhao, Jun Wang, Yan He, and Zhi Hui Kou. "Design and Fabrication of the Superabrasive Grinding Wheel with Phyllotactic Pattern." Advanced Materials Research 472-475 (February 2012): 2354–60. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2354.

Full text
Abstract:
In order to achieve the controllability of the abrasive arrangement on the working surface of grinding wheel,a new kind of the superabrasive grinding wheel, which has defined abrasive grain cluster pattern, has been designed based on the phyllotaxis theory of biology, and fabricated with UV lithography method and electroplating technology. The analytical results indicate that the phyllotactic parameters influence on the abrasive arrangement configuration on the work surface of the superabrasive grinding wheel, so as to improve grinding performance of the grinding wheel, increasing the diameter
APA, Harvard, Vancouver, ISO, and other styles
24

Deng, Zhao Hui, Wei Liu, Lin Lin Wan, and Hao Tang. "Experiment Research Progresses of Single Abrasive Grain Grinding." Key Engineering Materials 589-590 (October 2013): 470–74. http://dx.doi.org/10.4028/www.scientific.net/kem.589-590.470.

Full text
Abstract:
Grinding Mechanism is very complex and difficult, and it can be simplified to a single abrasive grain grinding research. With the analysis of process and result of single abrasive grain grinding from experiment, the purpose can be achieved of understanding the complexity of the grinding mechanism. According to the characteristics of grinding process, the current domestic and international research status of single abrasive grain grinding experiments is introduced. The different experimental methods used by scholars are analyzed in detail, as well as grinding characteristics of single abrasive
APA, Harvard, Vancouver, ISO, and other styles
25

Li, Shi Lei, Tao Lin, Zhi Wang, and Xin Bo He. "Effect on the Grinding Performance by the Different Elements of the Auxiliary Material." Advanced Materials Research 893 (February 2014): 649–52. http://dx.doi.org/10.4028/www.scientific.net/amr.893.649.

Full text
Abstract:
The effect of different elements of the auxiliary material on the grinding performance was studied in this paper. Through the grinding experiment, the grinding performance of the abrasive tool can be obtained. It shows that the grinding rate decreased until its content reached to16% following with increasing the NaHCO3 content. And the abrasive removal rate reduced, while the grinding efficiency was lower than the abrasive tool without adding NaHCO3. When ZnO content was reached 3%, the grinding rate increased by 43.48% and the grinding efficiency was also improved; while continue to increase
APA, Harvard, Vancouver, ISO, and other styles
26

Kashimura, Satoshi, Katsufumi Inazawa, Hitoshi Ohmori, and Nobuhide Itoh. "Development of Resin Fibrous Grinding Wheels Using Twin Nozzle PELID and Analysis of Their Grinding Performance." International Journal of Automation Technology 15, no. 1 (2021): 49–56. http://dx.doi.org/10.20965/ijat.2021.p0049.

Full text
Abstract:
The development of grinding wheels that are capable of improving the grinding accuracy and the finished surface roughness via the grinding process is increasingly sought in industries. The refinement of grinding wheels comprising abrasive grains is an effective means of improving the ground surface quality. The general methods used for fabricating grinding wheels tend to facilitate the aggregation of fine abrasive grains, resulting in poor abrasive distribution. Therefore, we focused on the electro-spinning mode of Patterning with Electrostatically Injected Droplet (PELID), which is capable of
APA, Harvard, Vancouver, ISO, and other styles
27

Zhao, Bo, C. Y. Zhao, and G. F. Gao. "Research on the Topography Features of the Densely Bonded Diamond Grinding Wheel Dressed by Elliptical Ultrasonic Vibration." Advanced Materials Research 188 (March 2011): 330–35. http://dx.doi.org/10.4028/www.scientific.net/amr.188.330.

Full text
Abstract:
In this paper, on the influence of different dressing methods, such as elliptical ultrasonic vibration, on the grinding wheel bonded delta, the morphology of abrasive grains of wheel, the protrusion height and the grinding wheel topography was studied by experiment. The experiment shows that the abrasive grains of grinding wheel surface dressed by elliptical ultrasonic vibration are great in protrusion height and trench depth, and the bonded delta grain after grinding is narrow, short, and irregular with significant reduced semi-surrounded area compared with by ordinary dressing method. The ab
APA, Harvard, Vancouver, ISO, and other styles
28

Odior, Andrew Oyakhobo, Festus A. Oyawale, Sunday O. Oyedepo, and Samson A. Aasa. "Theoretical considerations of machining with grinding wheels." International Journal of Engineering & Technology 2, no. 2 (2013): 126. http://dx.doi.org/10.14419/ijet.v2i2.687.

Full text
Abstract:
Grinding is one of the most versatile methods of removing material from machine parts by the cutting action of the countless hard and sharp abrasive particles of a revolving grinding wheel. It works by forcing the abrasive grains into the surface of the workpiece so that each grain cuts away a small bit of material in the form of chips. Abrasive grinding wheel is an expendable wheel that carries an abrasive compound on its periphery. They are made of small, sharp and very hard natural or synthetic abrasive minerals, bonded together in a matrix to form a wheel. The paper presents a review of so
APA, Harvard, Vancouver, ISO, and other styles
29

Kuai, Ji Cai, Dmitrii V. Ardashev, Jia Qi Zhang та Hua Li Zhang. "Manufacturing Technology of α-Fe Bonded Grinding Wheel Free Abrasive". Key Engineering Materials 780 (вересень 2018): 111–15. http://dx.doi.org/10.4028/www.scientific.net/kem.780.111.

Full text
Abstract:
ELID ultra-precision grinding mirror surface can achieve nanometer precision. However, after the grinding wheel passivates the abrasive particles in electrolysis, it is easy to scratch the ultra-precision ELID grinding surface into the grinding process. In order to solve this problem, a non-abrasive grain α-Fe bonded grinding wheel is propose, which contains no abrasive particles. After electrolysis, oxide film is formed on the surface of the wheel. In ultra-precision ELID grinding, there is no abrasive particles involved, only the polishing effect of oxide film. There is no need to worry abou
APA, Harvard, Vancouver, ISO, and other styles
30

Zhang, Gao Feng, Bi Zhang, Zhao Hui Deng, and Yuan Qiang Tan. "Grinding of Nanostructured WC Coatings with Single Fibrous-Abrasive Wheel." Key Engineering Materials 416 (September 2009): 482–86. http://dx.doi.org/10.4028/www.scientific.net/kem.416.482.

Full text
Abstract:
The random nature of the abrasive geometries and their distribution in a grinding wheel results in high specific grinding energy and temperature rise, large grinding forces and large deflection in the grinding system. To overcome the shortcomings encountered in grinding, it is necessary to design a new grinding wheel that is structured in controlled abrasive geometries with preferred spatial positioning and orientation. This paper deals with an experimental research of single fibrous-abrasive grinding of a nanostructured WC/12Co Coating. Prepared by the laser cutting of polycrystalline diamond
APA, Harvard, Vancouver, ISO, and other styles
31

Zhu, Lin, Peng Hai, and De Ming Xiao. "Experimental Research on Deep Hole Honing of Difficult-to-Cut Materials Based on Mixture-Abrasive Honing Stones." Key Engineering Materials 416 (September 2009): 461–66. http://dx.doi.org/10.4028/www.scientific.net/kem.416.461.

Full text
Abstract:
The deep hole honing is an effective and precise method in deep hole processing. It can remove the machining allowance to ensure the hole size and the shape accuracy, and have better surface quality of a hole. The difficult-to-cut materials such as precipitation-hardening stainless steel, stainless steel (1Cr18Ni9Ti) and titanium alloy have the properties of high hardness, wear resistance, heat resistance, and corrosion resistance. The conventional single-abrasive honing stones can not handle the difficult-to-cut materials effectively because of their single-abrasive property. For higher effic
APA, Harvard, Vancouver, ISO, and other styles
32

Zhang, Jian Hua, Pei Qi Ge, and L. Zhang. "Theory and Experiment Study on the Grinding Force." Advanced Materials Research 24-25 (September 2007): 217–22. http://dx.doi.org/10.4028/www.scientific.net/amr.24-25.217.

Full text
Abstract:
The grinding force was one of the most important parameters, almost related with all the parameters in grinding. In this paper, the grinding force model was established by a new method. The abrasive grains were analyzed using the statistical probability method. The abrasive grains were divided into two types, one was the cutting abrasive grain, and the other was contacting abrasive grain. The force analysis of a single abrasive grain was done. The grinding force model was established on the basis of the statistical probability method and the force analysis of a single abrasive grain. Theoretic
APA, Harvard, Vancouver, ISO, and other styles
33

Zhang, Jing Qiang, Peng Guan, Chong Su, and Wan Shan Wang. "Simulation of Vitrified CBN Grinding Wheel Abrasive Wear Based on SPH." Advanced Materials Research 317-319 (August 2011): 498–502. http://dx.doi.org/10.4028/www.scientific.net/amr.317-319.498.

Full text
Abstract:
This paper used spatial random cutting plane method for modeling the real irregular grain shapes, and method of smoothed particle hydrodynamic (SPH) was used to establish CBN grinding wheel abrasive wear model. In order to research the wear mechanism of CBN abrasive and the relationships between grinding parameters and grinding wheel wear, simulation of the wheel abrasive wear process was simulated by the LS-DYNA explicit dynamics. According to the results obtained by simulation of abrasive wear model which has the same law with the actual wear abrasive, it is has realistic instructive signifi
APA, Harvard, Vancouver, ISO, and other styles
34

Yuan, Ju Long, Dong Qiang Yu, Zhi Wei Wang, Yi Yang, Miao Qian, and Bing Hai Lv. "Experimental Validation of the ‘Trap’ Effect of the Semibonded Abrasive Grinding Plate." Advanced Materials Research 53-54 (July 2008): 161–66. http://dx.doi.org/10.4028/www.scientific.net/amr.53-54.161.

Full text
Abstract:
The semibonded abrasive machining technique is expected to get high surface integrity and processing efficiency attributed to the „trap‟ effect which can reduce or even eliminate the surface damage induced by the larger particles. The goal of the work is to validate the „trap‟ effect by the experiments of semibonded and loose abrasive machining under the conditions of adding and not adding the larger particles. Free surface damage monocrystal silicon wafers after polishing are adopted as workpieces, and 1000# SiC as abrasive particles while 180# SiC as the larger particles. The cast iron plate
APA, Harvard, Vancouver, ISO, and other styles
35

Xiang, Long, Yu Shan Lu, Jun Wang, Zhi Zhen Liu, Shan Zhang, and Fei Ma. "Experimental Investigations on the Grinding Temperature of the Superhard Grinding Wheel with Ordering Abrasive Pattern." Applied Mechanics and Materials 713-715 (January 2015): 90–94. http://dx.doi.org/10.4028/www.scientific.net/amm.713-715.90.

Full text
Abstract:
In the area of grinding, ordering the abrasive gains is one of the key ways to improve the grinding wheel performance. In this article, the experimental investigations on the grinding temperature were carried out including using the superhard abrasive grinding wheel with phyllotactic, matrix, dislocation and disordered configuration, the temperature distribution of the grinding workpiece surface and the effects of grinding parameters on the temperature of workpiece surface have been obtained. The experimental results showed that the grinding temperature can be reduced efficiently by choicing t
APA, Harvard, Vancouver, ISO, and other styles
36

Wang, Qin Sheng, Cun Liang, and Qing Guo Zhao. "Development and Application of CSD Diamond Abrasives." Advanced Materials Research 76-78 (June 2009): 673–77. http://dx.doi.org/10.4028/www.scientific.net/amr.76-78.673.

Full text
Abstract:
. Traditional diamond grits used for making resin bonded abrasives are monocrystalline in acicular shape and with smooth surface, so they are easy to fall off prematurely during grinding, the use effect is not good. Taking the powder graphite and the iron-base alloy catalyst as the raw material by adopting a new indirect heating craft, under the high pressure and high temperature conditions within cubic press, this project developed a new variety of diamond -- CSD abrasive with crumb structure. They have equi-axed shape and rough surface. It has been proved that the abrasive wheels made with C
APA, Harvard, Vancouver, ISO, and other styles
37

Yi, Liang, Yun Huang, G. H. Liu, and Z. Huang. "Experimental Research on the Electrochemical Abrasive Belt Grinding 0Cr17Ni4Cu4Nb Stainless Steel." Materials Science Forum 626-627 (August 2009): 617–22. http://dx.doi.org/10.4028/www.scientific.net/msf.626-627.617.

Full text
Abstract:
This article introduces a new way combining electrochemical and traditional abrasive grinding belt called Electrochemical Abrasive Belt Grinding. Through the study of grinding the 0Cr17Ni4Cu4Nb stainless steel, analyzes the influence of all the key factors for surface roughness during the process of electrochemical abrasive belt grinding by means of multivariate orthogonal experimental methods and single factor experimental method.
APA, Harvard, Vancouver, ISO, and other styles
38

Ichida, Y., and K. Kishi. "The Development of Nanocrystalline CBN for Enhanced Superalloy Grinding Performance." Journal of Manufacturing Science and Engineering 119, no. 1 (1997): 110–17. http://dx.doi.org/10.1115/1.2836547.

Full text
Abstract:
CBN grinding wheels are increasingly used on a wide range of engineering materials. This paper compares the grinding performance of monocrystalline (M-CBN) and polycrystalline (P-CBN) abrasives with a newly developed nanocrystalline (N-CBN) abrasive, when grinding nickel-based superalloys. The N-CBN grits possess average crystal grain diameters less than 1 μm compared to average primary grain diameters of 2.3 μm for P-CBN. It was found that the nanocrystalline CBN grits possess higher fracture strength which give reduced wear rates and yield an order of magnitude increase in grinding wheel lif
APA, Harvard, Vancouver, ISO, and other styles
39

Cooper, William L., and Adrienne S. Lavine. "Grinding Process Size Effect and Kinematics Numerical Analysis." Journal of Manufacturing Science and Engineering 122, no. 1 (1999): 59–69. http://dx.doi.org/10.1115/1.538888.

Full text
Abstract:
The present work developed numerical codes that simulate steady-state grinding process kinematics. The three-dimensional modeling procedure entails the following: specifying the sizes, shapes, and positions of individual abrasive grains on the wheel surface; geometrically calculating the abrasive grains’ depth of cut distributions along the grinding zone as they pass through the grinding zone (neglecting wheel, abrasive grain, and workpiece deflections); using an empirical relationship to relate the abrasive grains’ geometric depths of cut to the grains’ actual depths of cut; and updating the
APA, Harvard, Vancouver, ISO, and other styles
40

Sawa, Takekazu, Naohiro Nishikawa, and Yasushi Ikuse. "Evaluation of Grinding Performance by Mechanical Properties of Super Abrasive Wheel - Evaluation of Grade by Grinding Force." Key Engineering Materials 656-657 (July 2015): 266–70. http://dx.doi.org/10.4028/www.scientific.net/kem.656-657.266.

Full text
Abstract:
There is the grade as one of the selection criteria of a grinding wheel like WA whetstone or GC whetstone. The grade of grinding wheel is defined as an index which shows the strength of connection of a grain and a grain, and is usually estimated by bending strength. There are many papers about the relationship between the grade of a grinding wheel and the grinding performance. And, the relationship between the grade of a grinding wheel and the grinding performance is almost clear. Also, the relationship between mechanical properties of a grinding wheel and the grade is also clear. On the other
APA, Harvard, Vancouver, ISO, and other styles
41

Tian, Yebing, Linguang Li, Shuo Fan, Qianjian Guo, and Xiang Cheng. "A novel high-shear and low-pressure grinding method using specially developed abrasive tools." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 1-2 (2020): 166–72. http://dx.doi.org/10.1177/0954405420949106.

Full text
Abstract:
In this work, a novel grinding method using a special abrasive tool was first proposed to achieve high tangential grinding force and low normal grinding force. The abrasive tool was developed with flexible composites to remove workpiece materials under “high-shear and low-pressure” grinding mode. The concept of the high-shear and low-pressure grinding method was introduced in detail. Grinding tests were carried out on a precision grinder with the developed abrasive tool for single crystal silicon specimens. The results showed that the grinding force ratio between tangential force and normal fo
APA, Harvard, Vancouver, ISO, and other styles
42

Yuan, Suo Xian, and Bo Bi. "Experimental Study on the Belt Grinding Mechanism for Aluminum Alloys." Applied Mechanics and Materials 16-19 (October 2009): 60–64. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.60.

Full text
Abstract:
As a new technique integrating grinding and polishing, the technology of abrasive belt grinding is considered as a processing method with high quality, high efficiency, low consumption and wide range of application owing to its features of high processing efficiency, “cold” grinding, stable grinding speed, high precision and low costs. Taking aluminum alloy material as object of study and on the basis of the grinding technology of surface abrasive belt grinding machine, this paper carried out in-depth experimental study on the grinding mechanism of abrasive belt with aluminum alloy materials.
APA, Harvard, Vancouver, ISO, and other styles
43

Suzuki, Hirofumi, and Kazuhito Ohashi. "Special Issue on Precision Abrasive Technology of Difficult-to-Machine Materials." International Journal of Automation Technology 12, no. 6 (2018): 861. http://dx.doi.org/10.20965/ijat.2018.p0861.

Full text
Abstract:
The demand for high-precision hard components and their molds/dies have increased in various industries such as in the optical, automotive, and communication industries, as well as in life and medical sciences. Some difficult-to-machine materials can be reliably machined using deterministic precision cutting processes. On the other hand, hard and brittle materials such as ceramics, carbides, hardened steel of molds, glassy materials, or semiconductor materials have to be machined using precision abrasive technologies with super abrasives of diamond or cBN. However, the machining of high-precis
APA, Harvard, Vancouver, ISO, and other styles
44

Chai, Hua, Yun Huang, Yun Zhao, and Xin Dong Zhang. "Experimental Research on the Abrasive Belt Grinding Titanium Alloy Blade of Aviation Engine." Advanced Materials Research 565 (September 2012): 64–69. http://dx.doi.org/10.4028/www.scientific.net/amr.565.64.

Full text
Abstract:
In abrasive belt grinding Titanium alloy blade of aviation engine experiment, through the single factor experiment method, the influence of abrasive belt linear speed and work-piece feeding speed on the grinding quantity is discussed. The relationship between the clogging degree of abrasive belt and grinding time is analyzed. Then the influence of abrasive belt linear speed and work-piece feeding speed on the clogging degree of belt is discussed. The results indicate that when grinding time is 3 ~ 30 min or so, the clogging degree of belt does not change significantly. Therefore the grinding p
APA, Harvard, Vancouver, ISO, and other styles
45

Yang, Chun Qiang, Yun Huang, Zhi Huang, and Xiao Zhen Li. "Experimental Research on the Abrasive Belt Grinding Blades Material 1Cr13 Stainless Steel." Advanced Materials Research 148-149 (October 2010): 130–35. http://dx.doi.org/10.4028/www.scientific.net/amr.148-149.130.

Full text
Abstract:
Blades are the key parts of turbines. The materials used for making blades have many excellent performances such as high intensity, corrosion resistant and temperature resistant. They are of hard to machine materials. However, there is little information available in the literature related to abrasive belt grinding blades materials. And its mechanisms have not yet been fully explained. This paper aims to make a contribution to the understanding of the wear mechanisms of the abrasive belt and its influence factors. A series of tests were conducted on 1Cr13 stainless steel. The surface roughness
APA, Harvard, Vancouver, ISO, and other styles
46

Zhang, J. Q., Peng Guan, Chong Su, T. B. Yu, and Wan Shan Wang. "Simulation of Grinding Wheel with Random Three-Dimensional Abrasive and Microporous Bond." Key Engineering Materials 487 (July 2011): 209–14. http://dx.doi.org/10.4028/www.scientific.net/kem.487.209.

Full text
Abstract:
Be different from traditional simulation modeling method, in this paper, a random shape and distribution polyhedrons abrasive modeling method has been developed which simulation model is similar to the grinding wheel surface topography. Imitated the industrial process of abrasive production cutting, the characteristics of random distribution in the space and anisotropic of the abrasive particle shape on grinding wheel surface was also considered. A random geometry abrasive solid simulation model was developed which used random segmentation plane. Simulation modeling of grinding wheel in the pa
APA, Harvard, Vancouver, ISO, and other styles
47

Chen, Ya Xiong, Yun Huang, Gui Jian Xiao, Gui Lin Chen, Zhi Wu Liu, and Xiu Mei Liu. "Experiment and Surface Roughness Prediction Model for Ti-6Al-4V in Abrasive Belt Grinding." Advanced Materials Research 1136 (January 2016): 42–47. http://dx.doi.org/10.4028/www.scientific.net/amr.1136.42.

Full text
Abstract:
In abrasive belt grinding, abrasive belt granularity, abrasive belt speed,feeding speed and grinding force have a great influence on the surface roughness. In order to predicate the surface roughness of Ti-6Al-4V,a response surface methodology are used to build the model to predict surface roughness,and the influence of various parameters on surface roughness was analysed. The research shows that with the abrasive belt granularity and abrasive belt speed increasing,the work piece surface roughness decreases;with the grinding force and feeding speed increasing,the work piece surface roughness i
APA, Harvard, Vancouver, ISO, and other styles
48

Cui, Z. M., J. P. Kong, X. P. Yang, and Lei Du. "The Experimental Study on Characteristics of Low-Temperature Grinding of Ceramic Hollow Ball Super-Hard Composite Abrasive." Key Engineering Materials 487 (July 2011): 113–15. http://dx.doi.org/10.4028/www.scientific.net/kem.487.113.

Full text
Abstract:
Ceramic hollow ball Super hard composite abrasive has spherical hollow Mini-bore structure, This article introduced the structure of hollow spherical super hard abrasive, grinding model and the experimental investigations were conducted, It is found that the grinding wheel with hollow ball Super hard composite abrasive has more holes in the working layer of grinding wheel and can carrying more cooling fluid into the grinding area for heat exchanges, thus reducing the grinding temperature.
APA, Harvard, Vancouver, ISO, and other styles
49

Nosenko, V. A., M. V. Danilenko, and V. V. Vasilyev. "DETERMINING THE CHARACTER OF DISTRIBUTION THE CONTACTING VERTICES OF GRAINS AT THE SURFACE ON THE GRINDING WHEEL, TAKING INTO ACCOUNT THE MULTI-PASSAGE OF PROCESS." IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY, no. 1(248) (January 27, 2021): 23–26. http://dx.doi.org/10.35211/1990-5297-2021-1-248-23-26.

Full text
Abstract:
The article is devoted to the method of determining the nature of distribution the contacting vertices of grains on the working surface of grinding wheel, depending on the grinding time. The number of contacting grains is determined by the probability of contact. A distinctive feature is the use of a mathematical model that takes into account the change in the distribution of grain vertices as a result of wear of the abrasive tool during the grinding period. Considered the probabilities in three types of wear: abrasion and spallation of the grain's vertices, pull-out grain from the bundles of
APA, Harvard, Vancouver, ISO, and other styles
50

Li, Chang He, Ling Yun Qi, and Hua Yang Zhao. "Application and Development of High-Efficiency Abrasive Finishing." Advanced Materials Research 189-193 (February 2011): 3113–16. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.3113.

Full text
Abstract:
High-efficiency abrasive machining is one of the important technology of advanced manufacture. Combined with raw and finishing machining, it can attain high removal rate like turning, milling and planning. The difficult-to-grinding materials can also be ground by means of this method with high performance. In the present paper, development status and latest progresses on high efficiency abrasive machining technologies relate to high speed and super-high speed grinding, high efficiency deep-cut grinding, hard and brittle materials high-efficiency grinding, powerful grinding and belt grinding we
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!