Log in

Relevant bibliographies by topics / Abrasive slurry jet

Contents

Journal articles
Dissertations / Theses
Conference papers
Reports

Academic literature on the topic 'Abrasive slurry jet'

Author: Grafiati

Published: 4 June 2021

Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Abrasive slurry jet.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Abrasive slurry jet"

1

Luo, Wu Sheng, Cheng Yong Wang, Yue Xian Song, and Yan Pei Liao. "Characteristics and Polishing Effect of Abrasive Jet Beam with Polymer Abrasive Suspension Additives." Advanced Materials Research 126-128 (August 2010): 9–13. http://dx.doi.org/10.4028/www.scientific.net/amr.126-128.9.

Full text

Abstract:

We compared the characteristics and polishing effect of abrasive suspension slurry jets with and without high polymer added. Results show that adding high polymer to the slurry jet leads to more concentrated jet beam and, consequently, surface roughness in the jet polished region is approximately equal and the interface between polished and unpolished regions is narrowed. We also examined the surface forming process polishing with slurry jet added with high polymer, and then proposed a polishing model of the process.

APA, Harvard, Vancouver, ISO, and other styles

2

Luo, Wu Sheng, Cheng Yong Wang, Jun Wang, and Yue Xian Song. "A Study of Jet Formation for Premixed Slurry Jet Nozzle Using the Discrete Phase Model." Advanced Materials Research 325 (August 2011): 638–44. http://dx.doi.org/10.4028/www.scientific.net/amr.325.638.

Full text

Abstract:

Abrasive jets can be used for polishing when fine slurry is used. This paper presents a model for the jet formation process, CFD simulations are carried out for the prediction of flow pattern in a nozzle with abrasive suspension slurry jets using the discrete phase model. The CFD model aids in understanding the process because of the difficulties in performing the direct measurement of the jet axial velocity and radial velocity, the model simulates the different pressure premixed slurry pass through the pipeline and the focus tube to the atmosphere. The model is able to predict the orifice eff

APA, Harvard, Vancouver, ISO, and other styles

3

Wang, Xinyong, Dapeng Zhou, Guodong Zhu, and Chuwen Guo. "Rheological properties of two high polymers suspended in an abrasive slurry jet." e-Polymers 21, no. 1 (2021): 186–93. http://dx.doi.org/10.1515/epoly-2021-0005.

Full text

Abstract:

Abstract With high polymer added into suspension, the use of abrasive slurry jet (ASJ) has significant advantages in energy management. The quality and efficiency of ASJ are affected distinctly by its structure and the flow field feature, both of which depend on the rheological properties of the abrasive slurry. Therefore, this paper carries out a series of experiments to study the rheological properties of abrasive slurry with polyacrylamide (PAM) and carboxy methyl cellulose (CMC) commonly used in ASJ. The paper also explores the effect of temperature and abrasive on the apparent viscosity o

APA, Harvard, Vancouver, ISO, and other styles

4

Wang, F. C., L. L. Shi, and C. W. Guo. "Design of a new abrasive slurry jet generator." IOP Conference Series: Materials Science and Engineering 283 (December 2017): 012026. http://dx.doi.org/10.1088/1757-899x/283/1/012026.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Nouraei, H., A. Wodoslawsky, M. Papini, and J. K. Spelt. "Characteristics of abrasive slurry jet micro-machining: A comparison with abrasive air jet micro-machining." Journal of Materials Processing Technology 213, no. 10 (2013): 1711–24. http://dx.doi.org/10.1016/j.jmatprotec.2013.03.024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Li, Chang He, Shi Chao Xiu, Ya Li Hou, and Guang Qi Cai. "Power Spectral Density Analysis Finished Surface by Abrasive Jet with Grinding Wheel as Restraint." Advanced Materials Research 24-25 (September 2007): 337–42. http://dx.doi.org/10.4028/www.scientific.net/amr.24-25.337.

Full text

Abstract:

The abrasive jet finishing process with wheel as restraint is a kind of compound precision finishing process that combined grinding with abrasive jet precision machining, in which inject slurry of abrasive and liquid solvent to grinding zone between grinding wheel and work surface under no depth of cut feed condition when workpiece grinding were accomplished. The abrasive particles are driven and energized by the rotating grinding wheel and liquid hydrodynamic pressure and increased slurry speed between grinding wheel and work surface to achieve micro removal machining. The micro removal machi

APA, Harvard, Vancouver, ISO, and other styles

7

Qiang, C. H., and C. W. Guo. "Abrasive slurry jet cutting model based on fuzzy relations." IOP Conference Series: Materials Science and Engineering 283 (December 2017): 012025. http://dx.doi.org/10.1088/1757-899x/283/1/012025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Chang He, Ya Li Hou, Yu Cheng Ding, and Bing Heng Lu. "Power Spectral Density and Cross Correlation Function Analysis of Finished Surface by Abrasive Jet with Grinding Wheel as Restraint." Key Engineering Materials 416 (September 2009): 300–305. http://dx.doi.org/10.4028/www.scientific.net/kem.416.300.

Full text

Abstract:

The abrasive jet finishing process with wheel as restraint is a kind of compound precision finishing process that combined grinding with abrasive jet machining, in which inject slurry of abrasive and liquid solvent to grinding zone between grinding wheel and work surface under no radial feed condition when workpiece grinding were accomplished. The abrasive particles are driven and energized by the rotating grinding wheel and liquid hydrodynamic pressure and increased slurry speed between grinding wheel and work surface to achieve micro removal finishing.In the paper,the finished surface morpho

APA, Harvard, Vancouver, ISO, and other styles

9

Li, Chang He, Guang Qi Cai, and Shi Chao Xiu. "Study on Surface Topography and Tribological Characteristics Finished by Abrasive Jet with Grinding Wheel as Restraint." Materials Science Forum 532-533 (December 2006): 61–64. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.61.

Full text

Abstract:

The abrasive jet finishing process with wheel as restraint is a kind of compound precision finishing process that combined grinding with abrasive jet machining, in which inject slurry of abrasive and liquid solvent to grinding zone between grinding wheel and work surface under no radial feed condition when workpiece grinding were accomplished. The abrasive particles are driven and energized by the rotating grinding wheel and liquid hydrodynamic pressure and increased slurry speed between grinding wheel and work surface to achieve micro removal machining. The micro removal machining with grindi

APA, Harvard, Vancouver, ISO, and other styles

10

Hashish, M. "Comparative Evaluation of Abrasive Liquid Jet Machining Systems." Journal of Engineering for Industry 115, no. 1 (1993): 44–50. http://dx.doi.org/10.1115/1.2901637.

Full text

Abstract:

This paper presents a comparison between two types of abrasive liquid jet cutting systems: entrainment systems, which typically use abrasive-waterjets (AWJs) to perform the cutting; and systems that use directly pumped abrasive slurry jets (ASJs) to perform the cutting. The hardware features and the performance characteristics of the two types of systems are addressed. A simplified analysis indicates that at an abrasive-to-liquid ratio of 1:1, high-pressure directly pumped ASJs are twice as efficient as entrainment AWJs in transferring energy to the particles. Also, directly pumped ASJs are po

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Abrasive slurry jet"

1

Lallave-Cortes, Jorge C. "Numerical heat transfer during partially-confined, confined, and free liquid jet impingement with rotation and chemical mechanical planarization process modeling." [Tampa, Fla] : University of South Florida, 2009. http://purl.fcla.edu/usf/dc/et/SFE0002968.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kowsari, Kavin. "The Effects of Dilute Polymer Solutions on the Shape, Size, and Roughness of Abrasive Slurry Jet Micro-machined Channels and Holes in Brittle and Ductile Materials." Thesis, 2013. http://hdl.handle.net/1807/42988.

Full text

Abstract:

The present study investigated the effect of dilute polymer solutions on the size, shape, and roughness of channels and holes, machined in metal and glass using a novel abrasive slurry-jet micro-machining (ASJM) apparatus. The apparatus consisted of a slurry pump and a pulsation damper connected to an open reservoir tank to generate a 140-micron turbulent jet containing 1 wt% 10-micron alumina particles. With the addition of 50 wppm of 8-M (million) molecular weight polyethylene oxide (PEO), the widths of the channels and diameters of holes machined in glass decreased by an average amount of 2

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Abrasive slurry jet"

1

Fähnle, Oliver W., Hedser van Brug, and Hans J. Frankena. "Kinetic finishing applying a low pressure abrasive slurry jet system." In Fabrication and Testing of Aspheres. OSA, 1999. http://dx.doi.org/10.1364/fta.1999.ap3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Patel, Divyansh, and Puneet Tandon. "Optimization of Kerf Surface and Material Removal Rate Using Abrasive Water-Slurry Jet Machining Setup." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64245.

Full text

Abstract:

This work presents a description of abrasive water-slurry jet machining (AWSJM) to improve machining capabilities of conventional abrasive water jet machine. The present work proposes a new approach of AWSJM by equipping the conventional abrasive water jet machine (AWJM) with a programmable servomotor controlled abrasive flow control valve and fabricating a setup for injecting polymer solution into the abrasive water jet nozzle, which improves the performance of abrasive jet. Three types of concentrations are prepared to perform the experiments at different values of pressure, abrasive flow ra

APA, Harvard, Vancouver, ISO, and other styles

3

Haghbin, Naser, Farbod Ahmadzadeh, Jan K. Spelt, and Marcello Papini. "Micro-Machining of Channels using a High Pressure Abrasive Slurry Jet Machine (HASJM)." In Proceedings of the 4M/ICOMM2015 Conference. Research Publishing Services, 2015. http://dx.doi.org/10.3850/978-981-09-4609-8_110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

"Effect of Slurry Temperature on Kerf Taper Angle in Abrasive Water Jet Machining." In 2nd International Conference on Innovations in Engineering and Technology. International Institute of Engineers, 2014. http://dx.doi.org/10.15242/iie.e0914033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Padsalgikar, Ashwin, Ramin Dabirian, Ken Oglesby, Ram S. Mohan, and Ovadia Shoham. "Performance of Supercritical Slurry Jet Drilling System." In ASME 2017 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/fedsm2017-69462.

Full text

Abstract:

A slurry jet driller is a novel drilling method, which delivers an abrasive slurry and supercritical gas mixture, to an expander nozzle. The expanded fluids flowing out of the nozzle, energize the particles, which hit the target material and erode it, achieving drilling. The expansion of the gas from a super critical state to in situ pressure and temperature conditions is the driving mechanism of the drilling operation. The primary objective of this paper is to evaluate the feasibility of the novel slurry jet drilling system. An experimental program is carried out for testing the performance o

APA, Harvard, Vancouver, ISO, and other styles

6

Nouraei, H., K. Kowsari, B. Samareh, M. Papini, and J. K. Spelt. "A Combined Numerical-Analytical Methodology for Surface Profile Prediction of Abrasive Slurry Jet Micro-Machined Holes." In Proceedings of the 4M/ICOMM2015 Conference. Research Publishing Services, 2015. http://dx.doi.org/10.3850/978-981-09-4609-8_112.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Patel, Shreyansh, and Sinan Mu¨ftu¨. "On Polishing and Erosion of Aluminum Substrates by a Jet of Alumina Slurry." In ASME/STLE 2011 International Joint Tribology Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ijtc2011-61082.

Full text

Abstract:

Polishing of a nominally flat aluminum substrate using a fluid jet, carrying abrasive particles, was investigated. The effects of jet orientation and polishing duration were studied, on a fixed spot on the aluminum substrate. Stylus profilometry was used to examine the final surface along different directions. It was seen that the final erosion contour is strongly dependent on the jet orientation. The surface roughness was found to be dependent on the slurry parameters. On average, the average roughness (Ra) of the aluminum surface was reduced from 430 nm to 139 nm. Best polishing was obtained

APA, Harvard, Vancouver, ISO, and other styles

8

Gupta, Anuj. "Applications of Abrasive Fluid-Jets for Completion and Stimulation of Oil and Gas Wells." In ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/omae2009-79953.

Full text

Abstract:

This paper provides an overview of the development of abrasive-slurry-jet methods for completion and stimulation applications. Abrasive particles added to the fluid dramatically reduced the system pressure requirements. The paper discusses the technical capabilities of cutting through various materials and formations and also discusses improvements and proven applications. Abrasive fluid-jet systems are capable of cutting through rocks of all types, and with greater location control that is not susceptible to the geologically induced deviations encountered with mechanical methods. Abrasive flu

APA, Harvard, Vancouver, ISO, and other styles

9

Mansouri, Amir, Hadi Arabnejad Khanouki, Siamack A. Shirazi, and Brenton S. McLaury. "Particle Tracking Velocimetry (PTV) Measurement of Abrasive Microparticle Impact Speed and Angle in Both Air-Sand and Slurry Erosion Testers." In ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/fedsm2016-7768.

Full text

Abstract:

Solid particle laden flows are very common in many industries including oil and gas and mining. Repetitive impacts of the solid particles entrained in fluid flow can cause erosion damage in industrial equipment. Among the numerous factors which are known to affect the solid particle erosion rate, the particle impact speed and angle are the most important. It is widely accepted that the erosion rate of material is dependent on the particle speed by a power law Vn, where typically n = 2–3. Therefore, accurate measurements of abrasive particle impact speed and angle are very important in solid pa

APA, Harvard, Vancouver, ISO, and other styles

10

Messa, Gianandrea Vittorio, and Yongbo Wang. "Importance of Accounting for Finite Particle Size in CFD-Based Erosion Prediction." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-84248.

Full text

Abstract:

Being capable in predicting the removal of material from a surface subjected to the impingements of solid particles within a carrier liquid is of considerable industrial interest. This phenomenon, called impact erosion, is of concern in many applications due to its severe technical and economic consequences. The use of Computational Fluid Dynamics (CFD) techniques for impact erosion prediction is a challenging approach to avoid the cost and complexity of laboratory testing. A well-established methodology exists for CFD-based erosion estimation, consisting in the simulation of the slurry flow b

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Abrasive slurry jet"

1

Oglesby, Kenneth, Stefan Finsterle, Yingqi Zhang, et al. Michrohole Arrays Drilled with Advanced Abrasive Slurry Jet Technology to Efficiently Exploit Enhanced Geothermal Systems. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1253190.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!