Academic literature on the topic 'Absorb and condensation technology'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Absorb and condensation technology.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Absorb and condensation technology"

1

Li, Hou-Jun, Liang Cheng, Peng Sun, Fang-Fang Li, and Jun Qiu. "Potential Analysis of Atmospheric Water Harvesting Technologies from the Perspective of “Trading-in Energy for Water”." Water 15, no. 5 (2023): 878. http://dx.doi.org/10.3390/w15050878.

Full text
Abstract:
An applicable, high-volume, and sustainable water uptake technology can alleviate freshwater shortages, improve the energy utilization rate and promote the development of energy technology. Traditional seawater desalination, fog water, and dew collection are limited by the geographical environment, and the water resource transportation cost is high, or the water uptake volume is limited, so they cannot be used on a large scale. There are potential safety problems with wastewater reuse and recycled water. Atmospheric water harvesting technology uses energy for direct condensation or uses adsorb
APA, Harvard, Vancouver, ISO, and other styles
2

Zavoiko, A. S. "Dynamics of Properties of Laser Beams for Surface Hardening of Metals and Enrichment of Uranium and Transuranic Elements (Review)." Фізика і хімія твердого тіла 16, no. 1 (2015): 155–66. http://dx.doi.org/10.15330/pcss.16.1.155-166.

Full text
Abstract:
In this article considered consequence scientific achievement in laser technology which carry out in last time,and actual in development electron trreat equipment material analisis basic position warmth model evaporation and condensation film, sphere be form.
 Discass and analisis problem pass wave interaction and absorb energetic impuls situation, powerful condition on emition characteristics concentration source in they manyfoton ionisation and complex connection for the tecnology regim, and kreterial laser obtaind. This problem developed practical making gas,solution dipping with obtai
APA, Harvard, Vancouver, ISO, and other styles
3

Kozhevnikov, Vitaly A., Alexander V. Fedyukhin, and Konstantin V. Strogonov. "On the issue of reducing greenhouse gas emissions from the combustion of organic fuels." Bulletin of the Tomsk Polytechnic University Geo Assets Engineering 334, no. 11 (2023): 108–27. http://dx.doi.org/10.18799/24131830/2023/11/4122.

Full text
Abstract:
Relevance. Russia has ratified the Paris Climate Agreement. However, European legislation is ambiguously aimed at extracting its own benefits in the current international relations, especially during the period of sanctions against Russia. Expectation of introduction of a carbon tax on the products and services of industry organizations requires a comprehensive analysis of the situation in the field of technology and technologies that contribute to reducing greenhouse gas emissions. Aim. Study of approaches and technologies aimed at reducing greenhouse gas emissions that stimulate the environm
APA, Harvard, Vancouver, ISO, and other styles
4

Rozi, Fathor, and Siti Muti’atul Habibah. "LEARNING METHOD WHILE PLAYING DALAM MENINGKATKAN VERBAL SMART ANAK." Muróbbî: Jurnal Ilmu Pendidikan 7, no. 2 (2023): 317–33. http://dx.doi.org/10.52431/murobbi.v7i2.2032.

Full text
Abstract:
This study aims to find out how the application of the learning method while playing or also called the learning method while playing in improving verbal smart language and speaking skills in early childhood. This study uses a qualitative approach with a case study type. Data collection techniques in the form of observation, interviews, and documentation. Data analysis techniques are carried out systematically starting with data display, condensation, and drawing conclusions. The results of the field research found that the learning process in which the learning while playing method was applie
APA, Harvard, Vancouver, ISO, and other styles
5

Gajbhiye, Dr Pankaj R., Prathmesh R. Behere, Prachi M. Gajbhiye, Yash L. Chincholkar, Harsh M. Dharpure, and Saurabh B. Kewat. "Design Parameters of Parabolic Solar Water Heater with Inbuilt Automatic Solar Tracking System." International Journal for Research in Applied Science and Engineering Technology 11, no. 2 (2023): 821–25. http://dx.doi.org/10.22214/ijraset.2023.49135.

Full text
Abstract:
Abstract: This paper focuses on developing novel technique for a solar water heating system. The novel solar system comprises a parabolic dish concentrator, conical absorber and water heater. In this system, the conical absorber tube directly absorbs solar radiation from the sun and the parabolic dish concentrator reflects the solar radiations towards the conical absorber tube from all directions, therefore both radiations would significantly improve the thermal collector efficiency. The working fluid water is stored at the bottom of the absorber tubes. The absorber tubes get heated and increa
APA, Harvard, Vancouver, ISO, and other styles
6

Potesta González, Malena, Roberto Martínez Pérez, Andrés Meana Fernández, Juan M. González-Caballín Sánchez, Francisco J. Rubio Serrano, and Antonio J. Gutiérrez Trashorras. "Analytical study of the absorber performance of a Hygroscopic cycle for low concentrations of LiBr solutions." Renewable Energy and Power Quality Journal 21, no. 1 (2023): 405–8. http://dx.doi.org/10.24084/repqj21.338.

Full text
Abstract:
Nowadays, higher ambient temperatures and water scarcity, primarily due to climate change, represent a challenge for the refrigeration systems of traditional thermodynamic power cycles. The novel Hygroscopic Cycle Technology arises as a solution to mitigate those drawbacks by means of hygroscopic compounds, which lead to a condensation process by absorption in a mixing chamber, called absorber. Consequently, heat rejection can be achieved at higher cold sink temperatures in a closed loop, avoiding water consumption. In this work, the influence of the concentration of the hygroscopic salt LiBr
APA, Harvard, Vancouver, ISO, and other styles
7

Le, Tri Hieu, Minh Tuan Pham, H. Hadiyanto, Van Viet Pham, and Anh Tuan Hoang. "Influence of Various Basin Types on Performance of Passive Solar Still: A Review." International Journal of Renewable Energy Development 10, no. 4 (2021): 789–802. http://dx.doi.org/10.14710/ijred.2021.38394.

Full text
Abstract:
Passive solar still is the simplest design for distilling seawater by harnessing solar energy. Although it is undeniable that solar still is a promising device to provide an additional freshwater source for global increasing water demand, low thermal efficiency along with daily distillate yield are its major disadvantages. A conventional solar still can produced 2 to 5 L/m2day. Various studies have been carried out to improve passive solar stills in terms of daily productivity, thermal efficiency, and economic effectiveness. Most of the researches that relate to the daily output improvement of
APA, Harvard, Vancouver, ISO, and other styles
8

Cavargna, Augusto, Luigi Mongibello, Marcello Iasiello, and Nicola Bianco. "Analysis of a Phase Change Material-Based Condenser of a Low-Scale Refrigeration System." Energies 16, no. 9 (2023): 3798. http://dx.doi.org/10.3390/en16093798.

Full text
Abstract:
This study concerns the numerical simulation and the experimental implementation of a low-scale Phase Change Material-based (PCM-based) condenser, to be included in a PCM-based portable cooling systems. In this category of cooling systems, the PCM can be integrated either in the condenser or in the evaporator. In the present study, the PCM is integrated in the condenser of the vapor compression cycle to absorb the heat power released from the refrigerant fluid (R134a) during condensation, thus eliminating the need to transfer heat to the external environment. The main objective of the present
APA, Harvard, Vancouver, ISO, and other styles
9

Yakushin, Vladimir, Vanesa Dhalivala, Laima Vevere, and Ugis Cabulis. "Influence of Rigid Polyurethane Foam Production Technology on Cryogenic Water Uptake." Polymers 17, no. 12 (2025): 1669. https://doi.org/10.3390/polym17121669.

Full text
Abstract:
This study explores how production technology influences spray-applied rigid polyurethane (PUR) foam insulation’s cryogenic performance. In cryogenic applications such as liquid gas storage, insulation must minimise heat transfer and resist moisture ingress under severe thermal gradients. Experimental aluminium vessels were insulated with PUR foam of varying thicknesses and surface conditions—rough, machined smooth, and with a urea-based protective coating—and then tested using dynamic boil-off of liquid nitrogen (LN2). Foam properties, including adhesion, mechanical strength, thermal expansio
APA, Harvard, Vancouver, ISO, and other styles
10

Ren, Shangyuan. "Methods to Reduce Building Energy Consumption." Highlights in Science, Engineering and Technology 83 (February 27, 2024): 366–71. http://dx.doi.org/10.54097/qpk1sz54.

Full text
Abstract:
With the development of science and technology, the density of modern buildings in urban areas has increased to a large extent, giving rise to a sharp increase in building energy consumption. Therefore, it’s of great significance to reduce the energy consumption in buildings. The paper discussed the factors of energy consumption in industrial, residential, and commercial buildings, which can be divided into space heating, cooling, water heating, and lighting. There are also several methods of cutting down on wasted energy in buildings in this paper, including the heat pump system, the green ro
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Absorb and condensation technology"

1

Гарбуз, С. В. "Підвищення екологічної безпеки процесу вентиляції резервуарів з нафтопродуктами". Thesis, Національний університет цивільного захисту України, 2018. http://essuir.sumdu.edu.ua/handle/123456789/68005.

Full text
Abstract:
Дисертація присвячена підвищенню рівня екологічної безпеки за рахунок розроблення технології примусової вентиляції резервуарів для зберігання нафтопродуктів, що реалізується інноваційним ежекторно-вихровим способом подання повітря, та абсорбційно-конденсаційної технології уловлення парів летких вуглеводнів, що забезпечує додержання нормативів шкідливого впливу на атмосферне повітря й одержання додаткового еколого-економічного ефекту шляхом використання їх як товарної продукції. Розроблений екологічно безпечний спосіб дегазації наземних резервуарів для зберігання світлих нафтопродуктів, що дозв
APA, Harvard, Vancouver, ISO, and other styles
2

Willett, Lori Jo. "Condensation on heterogeneous regular surfaces /." free to MU campus, to others for purchase, 1999. http://wwwlib.umi.com/cr/mo/fullcit?p9964012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Karkoszka, Krzysztof. "Theoretical investigation of water vapour condensation in presence of noncondensable gases." Licentiate thesis, KTH, Energy Technology, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-321.

Full text
Abstract:
<p>Steam condensation phenomenon plays an important role in many industrial applications. Especially in energy sector this process requires deep understanding. When noncondensable gases are taken into consideration description of the entire phenomenon becomes more complicated. If the surface condensation is taken into consideration this additional species accumulates and creates noncondensable layer near the surface on water vapour condenses. Due to this effect heat and mass transfer rates from gas mixture decreases. Also volume condensation (if it occurs) is affected by the presence of inert
APA, Harvard, Vancouver, ISO, and other styles
4

Al-Fahhad, J. M. "Assessing the capability to acquire and absorb technology within the public sector in developing countries : the case of Kuwait." Thesis, Aston University, 2004. http://publications.aston.ac.uk/10782/.

Full text
Abstract:
The aim of this research is to assess the acquisition and absorption technology capabilities of the public sector in developing countries, with specific focus on the State of Kuwait. The assessment process of these two capabilities was conducted using a model originally designed for the private sector. In addition, the research aims to propose a framework to enhance the technological capability of developing countries, as well as the performance of the public sector. To achieve these aims, an investigation of the technology process to three public ministries in Kuwait was conducted. The prime
APA, Harvard, Vancouver, ISO, and other styles
5

Aoune, Azzeddine. "Experimental and theoretical studies of condensation on a horizontal tube row with vapour shear." Thesis, Heriot-Watt University, 1991. http://hdl.handle.net/10399/811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lindquist, Charlie. "Flue gas heat recovery for district heating : Analysis of flue gas condensation on a crematorium facility at Hovdestalund, Västerås." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-54759.

Full text
Abstract:
This degree project investigates the technical and economic possibility of a heat recovery system on Hovdestalund crematorium. The crematorium will have a solution that allows the facility to become both a producer and consumer to the district heating network. This work became relevant because the Swedish church is going to expand Hovdestalund with additional ovens and therefore energy efficiency is in their sight. With the help of Mälarenergi, a business model to be connected to the district heating network is created for Hovdestalund. The project will go through how to handle the flue gases,
APA, Harvard, Vancouver, ISO, and other styles
7

Khan, Sami Ph D. Massachusetts Institute of Technology. "Hydrophobicity of rare-earth oxide ceramics and their application in promoting sustained drop-wise condensation." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/104029.

Full text
Abstract:
Thesis: S.M. in Technology and Policy, Massachusetts Institute of Technology, Institute for Data, Systems, and Society, Technology and Policy Program, 2016.<br>Thesis: S.M., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2016.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 93-106).<br>Hydrophobic surfaces that are robust can have widespread applications in various industries including energy, hydropower, and transportation. In particular, hydrophobic materials promote dropwise condensation, which results in heat transfer coe
APA, Harvard, Vancouver, ISO, and other styles
8

Estephan, Joyce. "Analyse de la collecte d’eau atmosphérique à partir de surfaces micro-structurées." Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALT109.

Full text
Abstract:
L’accès à l’eau potable est devenu enjeu international, touchant des millions de personnes et mettant ennpéril les écosystèmes. Garantir l’accès équitable à cette ressource représente un défi pour l’humanité. Inspirés par la surface du dos du scarabée combinant à la fois des zones hydrophiles et des zones hydrophobes, nous proposons dans ce travail de thèse, des surfaces structurées, biphiliques capables de condenser et collecter l’eau atmosphérique. Ces surfaces, ayant différentes rugosités, tailles et formesde motifs sont préparées à base de polymère déposé sur silicium en combinant diverses
APA, Harvard, Vancouver, ISO, and other styles
9

Bortolato, Matteo. "Two-phase heat transfer inside minichannels: fundamentals and applications in refrigeration and solar technology." Doctoral thesis, Università degli studi di Padova, 2014. http://hdl.handle.net/11577/3423761.

Full text
Abstract:
This thesis reports the results of many experimental tests conducted to gain a deeper insight on the two-phase heat transfer inside minichannels and to characterize the thermal performance of two refrigerants with low environmental impact: propane (R290) and R1234ze(E). Furthermore, some considerations on the application of the minichannel technology in refrigeration applications and solar concentrators are presented. As pressure drops greatly affect the heat transfer in two-phase flow, the experimental investigation on frictional pressure gradient during adiabatic flow of R134a, R1234ze(E) a
APA, Harvard, Vancouver, ISO, and other styles
10

Fakourian, Seyedhassan. "Co-Milling and Cofiring of Woody Biomass with Coal in Utility Boilers: Enabling Technology Through Experiments and Modelling." BYU ScholarsArchive, 2020. https://scholarsarchive.byu.edu/etd/8719.

Full text
Abstract:
Beetle-killed trees and woody residues degenerate and may lead to wildfires and uncontrolled CO2 emission. Woody biomass is known as a neutral CO2 solid fuel since it generates the same amount of CO2 that takes from atmosphere during its growing up. Cofiring woody biomass with coal in existing coal power plants is a reasonable solution to reduce the net amount of CO2 emission and decrease the risk of wildfires. However, there are some challenges ranging from providing and handling the woody biomass to the operation of cofiring woody biomass with coal. Co-milling of the fuels and ash deposition
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Absorb and condensation technology"

1

Chen, Longfei, Xiaoyan Ma, Guangze Li, and Liuyong Chang. Condensation Particle Counting Technology and Its Applications. CRC Press, 2024. http://dx.doi.org/10.1201/9781003423195.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rifert, V. G. Condensation heat transfer enhancement. WIT Press, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Poincaré Seminar (2nd 2003 Paris, France). Poincare Seminar 2003: Bose-Einstein condensation-entropy. Edited by Dalibard J, Duplantier Bertrand, and Rivasseau Vincent 1955-. Birkhäuser, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Engineering Foundation Conference on Condensation and Condenser Design (1993 St. Augustine, Fla.). Condensation and condenser design: Proceedings of the Engineering Foundation Conference on Condensation and Condenser Design, St. Augustine, Florida, March 7-12, 1993. Published on behalf of the Engineering Foundation by ASME, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Taborek, J. Condensation and Condenser Design. American Society of Mechanical Engineers, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Condensation and condenser design. New York, N.Y ., 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rifert, Volodymyr, and Volodymyr Sereda. Heat Transfer Performance in Heat Exchangers with in-Tube Film Condensation. Primedia eLaunch LLC, 2022.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Moisture analysis and condensation control in building envelopes. ASTM, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Poincaré Seminar 2003: Bose--Einstein Condensation - Entropy (Poincaré Seminare). Birkhäuser Basel, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rifert, V. G., and H. F. Smirnov. Condensation Heat Transfer Enhancement (Developments in Heat Transfer). Wit Pr/Computational Mechanics, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Absorb and condensation technology"

1

Mersmann, Alfons, Matthias Kind, and Johann Stichlmair. "Evaporation and Condensation." In Thermal Separation Technology. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-12525-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lushnikov, Alexey A. "Condensation, Evaporation, Nucleation." In Aerosols - Science and Technology. Wiley-VCH Verlag GmbH & Co. KGaA, 2010. http://dx.doi.org/10.1002/9783527630134.ch4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Delale, Can F., Günter H. Schnerr, and Marinus E. H. van Dongen. "Condensation Discontinuities and Condensation Induced Shock Waves." In Shock Wave Science and Technology Reference Library. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-35846-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Khandekar, Sameer, and Krishnamurthy Muralidhar. "Modeling Dropwise Condensation." In SpringerBriefs in Applied Sciences and Technology. Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-8447-9_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khandekar, Sameer, and Krishnamurthy Muralidhar. "Dropwise Condensation: Experiments." In SpringerBriefs in Applied Sciences and Technology. Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-8447-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Grave, Harald. "Condensation under Vacuum." In Vacuum Technology in the Chemical Industry. Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527653898.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Khandekar, Sameer, and Krishnamurthy Muralidhar. "Dropwise Condensation: Simulation Results." In SpringerBriefs in Applied Sciences and Technology. Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-8447-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Luise, R. R. "Liquid Crystalline Condensation Polymers." In Integration of Fundamental Polymer Science and Technology—5. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3890-1_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Seeley, Ivor H. "Sound and Thermal Insulation, Dampness, Ventilation and Condensation." In Building Technology. Macmillan Education UK, 1995. http://dx.doi.org/10.1007/978-1-349-13565-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Seeley, Ivor H. "Sound and Thermal Insulation, Dampness, Ventilation and Condensation." In Building Technology. Macmillan Education UK, 1993. http://dx.doi.org/10.1007/978-1-349-12946-1_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Absorb and condensation technology"

1

Rollén, Jarl-Erik. "Corrosion Control through Micro-Porous Dry Technology." In SSPC 2008. SSPC, 2008. https://doi.org/10.5006/s2008-00058.

Full text
Abstract:
Abstract Rust is caused by the influence of water, oxygen and time. Air pollution and contaminants on steel surfaces speed up the corrosion process. When corrosion is caused by condensation water, a micro-porous coating can considerably enhance traditional corrosion protection. in 4 distinct ways: It delays the forming of condensation on the surfaceIt absorbs the condensation into the micro-pores during heavy condensation periods, spreads it in the porous matrix and makes it evaporate at a much faster speed than from a smooth surface. Thus it reduces the time corrosive contaminants are in cont
APA, Harvard, Vancouver, ISO, and other styles
2

Charles, Jacques, Jean-Pierre Audouard, and Michel Verneau. "Metallic Answers for F.G.D. Systems." In CORROSION 1998. NACE International, 1998. https://doi.org/10.5006/c1998-98480.

Full text
Abstract:
Abstract To reduce the air pollution caused by fossil energy boilers, flue gas desulfurization units are more and more used in North America, European countries and Asean. The most common technology consists of scrubbing the polluted gas with a slurry of lime or limestone in water. In certain zones of scrubber (absorber) where the reaction between polluted gas and the solution is not complete, acidic condensation can occur and, combined with high temperatures, chlorides and/or fluorides, lead to very aggressive conditions. Generally, metallic materials present the best solution in terms of rel
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Chenyuan, Yongjin Wu, Han Cai, et al. "Long-Term Superhydrophobicity at Copper-Based Interface with Micropillar Structure for Droplet Condensation." In 2024 25th International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2024. http://dx.doi.org/10.1109/icept63120.2024.10668638.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gao, Zhaowen, and Yao Sun. "Numerical Study of Transient Ammonia Flow and Condensation in an Intake System Pipe." In 2024 9th International Conference on Clean Energy and Power Generation Technology (CEPGT). IEEE, 2024. https://doi.org/10.1109/cepgt64143.2024.11064810.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kandziora, Adrian, Bob Wittig, Gerret Asseburg, and Markus Thoben. "Boundary Conditions for Reproducible and Comparable Condensation Tests to Prove the Migration Resistance of Assemblies." In 2024 IEEE 10th Electronics System-Integration Technology Conference (ESTC). IEEE, 2024. http://dx.doi.org/10.1109/estc60143.2024.10712124.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

He, Pengfa, Huaiyu Dong, Hailiang Liu, and Cunli Zhang. "A Monte Carlo Analysis of Condensation Risk from Sensor Error in Magnetic Resonance (MR) Cabinet." In 2024 3rd International Symposium on Semiconductor and Electronic Technology (ISSET). IEEE, 2024. https://doi.org/10.1109/isset62871.2024.10779835.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chandkoti, Ikhlas, Amol Naikwadi, and Manoj Mali. "Moisture Condensation Management in Automotive Headlamp Using Super Hydrophilic Cross-Linked Polymer Composites." In Symposium on International Automotive Technology. SAE International, 2024. http://dx.doi.org/10.4271/2024-26-0084.

Full text
Abstract:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;This work aims to develop potential super hydrophilic cross-linked smart polymer composites and condensation management device (CMD) for condensation control in automotive headlamps. Condensation and moisture buildup in the automotive headlamp decrease the visibility to the driver. The super hydrophilic cross-linked polymer composites were prepared with the combination of polyacrylamide-based hydrogels and hygroscopic lithium bromide desiccants. In this work, we have utilized various desiccants such as calcium chloride (
APA, Harvard, Vancouver, ISO, and other styles
8

Bian, Jiang, and Xuewen Cao. "Research on the Condensation Process of Gaseous Water and Water/Ethanol Mixture in the Laval Nozzle." In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-4917.

Full text
Abstract:
Abstract Condensation phenomenon has been studied actively for decades because of its extensive and significant applications in various fields of technology and engineering. The condensation phenomenon of condensable component in supersonic flows is still not understood very well as a result of the complex nucleation and droplet growth process, especially the condensation characteristic of gas mixture. In this paper, the Laval nozzle was designed based on the bi-cubic curve, state equation of real gas, arc plus straight line and viscous correction of boundary layer. The physical and mathematic
APA, Harvard, Vancouver, ISO, and other styles
9

Ibrahim, Nasiru I., Fahad A. Al-Sulaiman, and Saidur Rahman. "Thermodynamic Analysis of a Mini Hybrid Solar Driven Cooling-Desalination System." In ASME 2016 10th International Conference on Energy Sustainability collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/es2016-59524.

Full text
Abstract:
Water desalination and air conditioning consumes huge amount of energy that mostly come from fossil fuels, which produces harmful emissions detrimental to the environment. This work is concerned with the use of a new hybrid cooling and water desalination system driven by solar thermal energy. The system primarily consists of an evacuated tube solar collector, LiBr absorption chiller, and a humidification-dehumidification (HDH) unit. Seawater is used to cool the condenser and absorber of the chiller as well as the condenser of the HDH unit. The heat rejected by the absorber is used to drive the
APA, Harvard, Vancouver, ISO, and other styles
10

Cetegen, Edvin, Thomas Baummer, Serguei Dessiatoun, and Michael Ohadi. "Heat Transfer Analysis of Microgrooved Evaporator and Condenser Surfaces Utilized in a High Heat Flux Two-Phase Flow Loop." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42001.

Full text
Abstract:
This paper investigates the heat transfer and pressure drop analysis of micro grooved surfaces utilized in evaporators and condensers of a two-phase flow cooling loop. These devices utilize the vapor-liquid phase change to transfer large amounts of heat, and they offer substantially higher heat flux performance with lower pumping power than most liquid cooling technologies. Microgrooved surfaces, combined with force-fed evaporation and condensation technology discussed in this paper yield high heat transfer coefficients with low pressure drops. Our most recent results, aiming to test the limit
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Absorb and condensation technology"

1

Ruschau and Tossey. L52209 Application of Repair Coatings to Wet Surfaces. Pipeline Research Council International, Inc. (PRCI), 2004. http://dx.doi.org/10.55274/r0010377.

Full text
Abstract:
The field application of pipeline repair and rehabilitation coatings can be greatly dependent upon the ambient conditions on the day of the scheduled repair. In some cases, such as the application of FBE at girth welds, temporary shelters can be built over the girth weld area to protect pipe from the elements. However, for the majority of pipeline applications, coatings must be applied to a pipe surface that is not optimized for coating application. Specifically, pipelines which are in service during the repair coating operation will be at the temperature of the product flowing through them re
APA, Harvard, Vancouver, ISO, and other styles
2

Goncharenko, Tatiana, Nataliia Yermakova-Cherchenko, and Yelyzaveta Anedchenko. Experience in the Use of Mobile Technologies as a Physics Learning Method. [б. в.], 2020. http://dx.doi.org/10.31812/123456789/4468.

Full text
Abstract:
Swift changes in society, related to sciences technicians’ development, technologies, by the increase of general volume of information, pull out new requirements for maintenance, structure, and quality of education. It requires teachers to diversify a tool in the direction of the increase in possibilities of the use of mobile technologies and computer systems. Lately in the world, more attention spared to the use of mobile learning, which in obedience to «Recommendations of UNESCO on the questions of a policy in the area of mobile learning» foresees the use of mobile technology, both separate
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!