Relevant bibliographies by topics / Accessory design

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Accessory design'

Author: Grafiati
Published: 5 June 2025
Last updated: 24 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Accessory design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Accessory design"

1

Yang, Jien, Hang Xu, and Ming Qiu Zhou. "Design of Electrical Accessory Integrated Test System." Advanced Materials Research 466-467 (February 2012): 1382–85. http://dx.doi.org/10.4028/www.scientific.net/amr.466-467.1382.

Full text
Abstract:
To meet the needs of certain series of airborne electrical accessory test, a set of airborne electrical accessory integrated test system is built. The core of the test system is IPC, the hardware and software adopt modular structure. Based on computer control, database processing, self-identification and security technology, the integration and intelligent on airborne electrical accessory test are realized in system. The application results show that this system can not only improve the efficiency of maintenance support, but also has the further ability of extendibility.
APA, Harvard, Vancouver, ISO, and other styles
2

Conroy, C. M., J. D. Guthrie, A. J. Sharkins, B. J. Sparr, R. A. Crocombe, and R. Curbelo. "An Infrared Accessory for Studying the Emissivity of Aluminum Surfaces." Applied Spectroscopy 41, no. 4 (1987): 688–92. http://dx.doi.org/10.1366/0003702874448436.

Full text
Abstract:
Temperature measurement of aluminum surfaces by remote sensing of infrared radiation is difficult because of the low and varying emissivity of aluminum. The variation in emissivity may be dependent on factors like surface roughness, surface oxides, temperature, or wavelength of the measurement. In order that the factors which affect the emissivity of pure aluminum might be studied, a specialized emission accessory was built to be used in conjunction with a Fourier transform infrared spectrometer. This paper describes the design of the accessory and presents emission spectra and emissivity curves demonstrating the accessory's capabilities.
APA, Harvard, Vancouver, ISO, and other styles
3

Meissner, Florian, Michelle Costa Galbas, Hendrik Straky, et al. "In Vivo Testing of a Second-Generation Prototype Accessory for Single Transapical Left Ventricular Assist Device Implantation." Bioengineering 11, no. 8 (2024): 848. http://dx.doi.org/10.3390/bioengineering11080848.

Full text
Abstract:
A new accessory was developed to allow implantation of left ventricular assist devices (LVADs) without requiring an anastomosis to the ascending aorta. The accessory combines the LVAD inflow and outflow into a dual-lumen device. Initial prototypes encountered reduced pump performance in vitro, but a second-generation prototype successfully addressed this issue. This feasibility study aimed to demonstrate the anatomic fit, safe implantation, and hemodynamic effectiveness of the LVAD with the accessory. The accessory was implanted in ten female pigs (104 ± 13 kg). Following sternotomy and apical coring under cardiopulmonary bypass, a balloon catheter was retrogradely inserted and exteriorized through the coring site, where it was inflated within the distal third of the outflow graft. It was utilized to pull the accessory’s outflow across the aortic valve. After LVAD attachment, the catheter was removed. Echocardiography revealed no relevant valve regurgitation post-implantation. During ramp testing, pump flow increased from 3.7 ± 1.2 to 5.4 ± 1.2 L/min. Necropsy confirmed correct accessory placement in nine animals. No valve lesions or device thrombosis were observed. The accessory enabled LVAD implantation without compromising pump performance. Future work includes design refinements for implantation without cardiopulmonary bypass and long-term testing in a chronic heart failure model.
APA, Harvard, Vancouver, ISO, and other styles
4

Meissner, Florian, Derya Eichelkraut, Marius Schimmel, et al. "Impact of an Accessory for Left Ventricular Assist Devices on Device Flow and Pressure Head In Vitro." Bioengineering 10, no. 4 (2023): 486. http://dx.doi.org/10.3390/bioengineering10040486.

Full text
Abstract:
A novel accessory directing the blood from the outflow of a left ventricular assist device (LVAD) back through the left ventricular apex and across the aortic valve allows LVAD implantation via the left ventricular apex solely but may affect the LVAD performance. We quantified the effect of the accessory on LVAD flow and pressure head in vitro. In a mock circulatory loop, a centrifugal-flow LVAD (HeartMate 3, Abbott, Abbott Park, IL, USA) with (Accessory) and without the accessory (Control) was compared under physiological conditions using a water/glycerol solution as a blood substitute. The pump was operated at 4000, 5200, and 6400 rpm and 5 different resistance levels. Flow, inlet, and outlet pressure were measured, and pressure head was calculated. Compared to the Control, flow and pressure head in the Accessory group were reduced by an overall average of 0.26 L/min and 9.9 mmHg (all speeds and resistance levels). The highest decline in flow and pressure head occurred at the lowest resistance levels. In conclusion, the accessory leads to a reduction of LVAD flow and pressure head that is enhanced by decreases in resistance. Future developments in the LVAD accessory’s design may reduce these effects and allow unimpaired LVAD performance and minimally invasive device implantation.
APA, Harvard, Vancouver, ISO, and other styles
5

Beikmann, R. S., N. C. Perkins, and A. G. Ulsoy. "Design and Analysis of Automotive Serpentine Belt Drive Systems for Steady State Performance." Journal of Mechanical Design 119, no. 2 (1997): 162–68. http://dx.doi.org/10.1115/1.2826231.

Full text
Abstract:
Serpentine belt drive systems with spring-loaded tensioners are now widely used in automotive engine accessory drive design. The steady state tension in each belt span is a major factor affecting belt slip and vibration. These tensions are determined by the accessory loads, the accessory drive geometry, and the tensioner properties. This paper focuses on the design parameters that determine how effectively the tensioner maintains a constant tractive belt tension, despite belt stretch due to accessory loads and belt speed. A nonlinear model predicting the operating state of the belt/tensioner system is derived, and solved using (1) numerical, and (2) approximate, closed-form methods. Inspection of the closed-form solution reveals a single design parameter, referred to as the “tensioner constant,” that measures the effectiveness of the tensioner. Tension measurements on an experimental drive system confirm the theoretical predictions.
APA, Harvard, Vancouver, ISO, and other styles
6

Fang, Hui Min, and Gang Zhao. "The Development of Database System of Parameter and Coefficient for the Common Shafting Parts." Applied Mechanics and Materials 496-500 (January 2014): 1752–56. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.1752.

Full text
Abstract:
This article illustrates with the criterion of the common shafting accessorys design, using the Visual C++ and the Access to primarily set up the parameters and coefficients database of the shafting accessories, which are mostly the gear and the conical roller gearing. Setting up its function as demanding, appending and deletion, etc. Making the data processing for mechanical design and other fields conveniently. Through this research and exploitation, It can account for setting up the parameters and coefficients database of the standard accessory is necessary and really count for engineering.
APA, Harvard, Vancouver, ISO, and other styles
7

Kim, Jun Hyeop. "A Study on Accessory Design for Laryngectomee Using Service Design Process." Journal of Basic Design & Art 20, no. 3 (2019): 63–74. http://dx.doi.org/10.47294/ksbda.20.3.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hwang, Bo Hyun, and So Hyoung Park. "Design Type Research of Gucci Fashion Accessory Hardware." Journal of Basic Design & Art 21, no. 5 (2020): 687–704. http://dx.doi.org/10.47294/ksbda.21.5.49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Davis, LaPorchia C., Joel Tomlinson, Lombuso Khoza, and Najma Jamaludeen. "Collaboration of 3D technology and fashion innovations: A creative accessory development assessment." Fashion, Style & Popular Culture 7, no. 2 (2020): 179–91. http://dx.doi.org/10.1386/fspc_00013_1.

Full text
Abstract:
Abstract In this study, we examined student experiences surrounding the utilization of 3D printing for accessory production by fashion merchandising students enrolled in an Apparel Construction and Evaluation course at a historically Black university. The students designed and produced a sustainable 3D accessory prototype, and at the end of the course, completed a survey on their experiences surrounding drafting and the design-making process using computer-aided design (CAD). Faculty in the Apparel Construction and Evaluation course collaborated with Department of Technology faculty to help advance students' design skills in mass manufacturing in the fashion industry. Each student completed a month of impactful technology experience by creating sustainable prototypes of 3D accessories for their end-of-year fashion showcase held annually in the department. Results were compiled from student-completed surveys administered at the end of the course. This research was undertaken with the primary goal of assessing creative learning and was focused on three objectives: (1) to have students rethink and develop their own sustainable accessory line; (2) to provide students with real-world fashion accessory applications and (3) to increase students' understanding of computer-aided methods of design through 3D modeling, shapes and figures.
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Shi-chang, Xiao-ming Xu, Feng Gao, et al. "Analysis and Design of the Accessory Structure under the Large Deformation of a Flexible Roof." Advances in Civil Engineering 2022 (September 13, 2022): 1–9. http://dx.doi.org/10.1155/2022/6997928.

Full text
Abstract:
An increasing number of large-span space structures use flexible roofs to achieve a light and splendid architectural effect. When a flexible structural system such as a cable net is applied in a large-span stadium, the roof will deform significantly under the self-weight and wind load. Accessory structures of the roof such as catwalks, radial drainage pipes, circular drainage channels, and radial cable trenches need to cooperate with the large deformation of the roof to prevent damage caused by the large deformation of the roof. To thoroughly unveil the analysis and design method of an accessory structure, this paper first carried out the wind tunnel test to determine the wind load of the structure. Then, the gust response factors of each roof area and the dynamic amplification coefficient of the accessory structure considering the roof vibration were determined. Next, circular and radial catwalks were designed based on static analysis. A sliding joint was set in the accessory structure to adapt to the large deformation of the roof. Finally, a time history analysis of the catwalk was carried out to obtain the maximum deformation value of the sliding joint for the safety of the structure. The results demonstrate that the maximum deformation is less than the value given by the design and meets the specification.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Accessory design"

1

Larsson, Emelie. "Wax-accessory for cross-country skiers : Development of a wax-bench that collect waste." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-70833.

Full text
Abstract:
This is a master thesis report for MSc in Industrial Design Engineering at Luleå University of Technology. It is a development project where a wax-bench for cross-country skiing has been developed. The wax-bench have been developed to facilitate the clean-up for the user and to gather all wax-accessories at one place. In this report the entire project can be followed from start to finish, how the requirements were found, who is the user, what should the product handle and how was the ideas ge- nerated. The final result is a wax- box that is vacuum formed and folded in the middle. In the box there are adjustable profiles to place the ski on and an adjustable attachment part in the center that attaches to the skis binding. The box acts as a collector of the waste that is produced when waxing skis, and as storage of waxing accessories when not in use. How to install the accessory in the box is not yet determined, but the idea is to develop a specific bag that fits perfectly in the wax-box and includes all the usual accessories. This bag should then be taken out when you wax and put back in the box after complete the waxing.<br>I den här rapporten kan man följa ett examensarbete för civilingenjörsprogrammet Tek- nisk Design på Luleå Tekniska Universitet. Projektet består av ett utvecklingsarbete där en vallabänk för längdskidåkning har utvecklas. Vallabänken har utvecklats för att underlätta städningen för användaren och för att samla alla vallatillbehör på en och samma plats. I den här rapporten kan man följa hela projektet från start till mål, hur kraven hittades, vem är användaren, vad ska produkten klara av och hur genererades ideer. Det slutgiltiga resultatet är en valla-låda som är vakuumformad och viks ihop på mitten. I lådan finns det justerbara profiler att placera skidan på samt ett justerbart fäste i mitten som fäster i skidans bindning. Lådan fungerar som uppsamlare av skräpet som bildas när man vallar skidor och som förvaring av vallatillbehör när den inte används. Hur valla-tillbehöret ska placeras är ännu inte fastställt men tanken är att det ska utvecklas en specifik väska som passar in perfekt i valla-boxen och som har plats för alla de vanliga tillbehören. Denna väska ska sedan gå att plocka ur när man vallar och placera tillbaka i boxen efter utförd vallning.
APA, Harvard, Vancouver, ISO, and other styles
2

Jusis, Camilla. "Knot – A Signature Based Notification System." Thesis, Malmö högskola, Fakulteten för kultur och samhälle (KS), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-23938.

Full text
Abstract:
The thesis project underlines the importance of designing calm and subtle technologies, by exploring how mobile communicative technologies, such as cell phones, could notify their users about incoming information in a more natural, and non-intrusive manner. The aim of the thesis was to find a way for cell phones to act more appropriately in public and social settings, where they now often are considered intrusive due to their uninhibited manifestations.The thesis provides a theoretical understanding of how normative expectations of cell phone conduct are constituted and maintained within public and social settings. The theories are further grounded in practical work, where the project employ user centered design methods and techniques to, in a collaborative manner, together with users explore the research field to generate insights. Solutions have further been prototyped and evaluated together with users in their everyday settings.Taking inspiration from calm technology, the project looks into how information can be notified, in a more subtle manner in the periphery of the user’s attention. Users’ own priming abilities have been considered as a personal way to recognize the notification and to further associate it as relevant information.As a solution for intrusive cell phones, the thesis proposes Knot; a signature based notification system, which builds on friends’ abilities to recognize each other’s characteristic traits. The system consists of a notification rope, which is a free standing phone accessory that twists and turns, when new information is arriving to the user’s cell phone. It can present whom the information is from by shaping itself into the sender’s representative Knot-signature. If the user can recognize the signature, it will immediately trigger a meaningful association to the person who sent the information.The solution builds upon the restrictiveness between those who can associate a certain signature to a certain person, and those who cannot. For those who have the ability to associate to the signature, its role as a notifier will become meaningful and informative, while for others, who do not share this ability, the signature would be subtle and meaningless, and hence not interfering. The thesis exemplifies how interfaces could provide users with output in a more natural way, by considering users’ previous skills and knowledge, and primarily their priming abilities.
APA, Harvard, Vancouver, ISO, and other styles
3

GASPAROTTO, SILVIA. "L'ecosistema del design aperto : open source, collaborazione e accesso nella progettazione e nella produzione." Doctoral thesis, Università IUAV di Venezia, 2016. http://hdl.handle.net/11578/278723.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Portaro, Angelica. "Modellazione termodinamica in design e off-design di un termovalorizzatore per la riduzione del consumo di gas naturale accessorio e dell’impatto ambientale." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.

Find full text
Abstract:
La presente tesi illustra la modellazione del ciclo termico del Termovalorizzatore di Granarolo dell'Emilia, simulato sia in condizioni di design che in condizioni di off-design, tramite il software Thermoflex. L'obiettivo è quello di verificare la convenienza della modifica del layout attuale prevista, che prevede la realizzazione di un sistema di preriscaldo dei fumi di combustione prima dell'ingresso nel sistema SCR, tramite vapore surriscaldato. La modellazione è stata approfondita per le condizioni di marcia di fuori progetto tramite simulazione in off-design, attenzionando la penalizzazione della turbina a vapore e la degradazione delle sue prestazioni. Infine, è stata svolta un'analisi economica e ambientale con l'obiettivo di dimostrare la riduzione dell'impatto ambientale e calcolare il tempo di ritorno economico dell'investimento.
APA, Harvard, Vancouver, ISO, and other styles
5

Francesco, Rossetto. "Design of Multiple Access Techniques for Multihop Wireless Networks\\from a Physical Layer Point of View." Doctoral thesis, Università degli studi di Padova, 2009. http://hdl.handle.net/11577/3425608.

Full text
Abstract:
This thesis collects the key research results on wireless networking developed during the three years of the PhD. The approach that underlies all work has been the analysis and design of wireless network protocols together with their physical layer. The former have been created keeping in mind the features of the adopted physical layer techniques and, conversely, the physical layer has been chosen according to the employed MAC/routing and its necessities. The results focus on three main areas. In the first branch, MIMO signal processing is applied in order to optimize broadcast in a wireless MIMO network, to improve the robustness of Network Coding to the vagaries of the wireless environment and finally to design cooperative protocols that reward nodes which help each other. In all these cases, great emphasis has been placed on signal processing and on its actual algorithmic implementation. In the second part, Carrier Sense optimization for radio networks is studied. First a special type of carrier sense system for MIMO ad hoc networks is described. Then, attention is focused on single antenna terminals, and an analytical model for carrier sense optimization in static networks (i.e., topology is known) is developed so as to find the carrier sense threshold that maximizes aggregate throughput. Moreover, specific algorithms have been created also for dynamic networks (i.e., nodes are mobile or the topology is not known beforehand). In addition, the analytical model for static networks is applied also to design a low-complexity, high-performance scheduler for mesh networks. In any case, interference analysis and the characteristics of the propagation environment play a key role to study this problem. In the last portion of this thesis, a more theoretical approach is undertaken: the performance of an Aloha multihop wireless network in terms of throughput and delay is analyzed, under saturation conditions or not. The impact of a variety of physical layer parameters (like rate, path-loss exponent or SNR decoding threshold) on network performance is analyzed, and we establish how certain parameters (e.g., transmission probability, rate, route length, admission control) must be tuned in order to optimize performance.
APA, Harvard, Vancouver, ISO, and other styles
6

Chien-Yu, Liu, and 劉健宇. "The research of integrated new product design-the auxiliary accessory design for Transnet." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/4722n5.

Full text
Abstract:
碩士<br>國立高雄師範大學<br>工業設計學系<br>102<br>Due to the development of internet and technology, many of commerce now have transferred to e-commerce. Precisely and timely cash flow and information flow are its identity. Although commerce could be done on internet, goods can’t be transferred through the internet by present technology. Shops need to deliver goods to consumers through logistics system. The efficiency and availability of logistics system depend on logistician can use tools which like logistics vehicles, carts and Auxiliary systems efficiently or not. The industry use both motorized vehicles (truck, motor scooter) and non-motorized vehicles (cart, dray) as delivery equipment for now. Therefore, Because Taiwan is a highly urbanized community many narrow alleys are hard to reach by the vehicle currently being used. In this study we use this background as our motivation and want to know if there are any possible to develop an auxiliary accessory for improving the working environment of logisticians by our profession. We care also contribute to the community. According to Innovation and New Product Development method, this study can be separated into 4 stage: (1) the first stage is identifying opportunities. Through data collection and interviewing major delivery industry executives and drivers which includes industries from northern, central and southern Taiwan. After further understanding, we found that improving existing 4 wheel cart is a positive suggestion; (2) the second stage is understanding opportunities. Conduct STEEP and analyze product opportunity gap. STEEP is a modern STEP analyze which can analyze product trend in external environment or in internal policies. By integrating the interviewing into the results, we can find out the relationship between product and product opportunities. An initial innovative concept will generate. The concept can be put into the third stage; (3) the third stage is conceptualize opportunities. By collecting opinions from target users to clarify whether the concept is appropriate or not; (4) the fourth stage is realizing opportunities. Using the result from 3 stage above to correct the initial concept. Through Innovation and New Product Development method, we can design a product which truly fit the environment and care users. The product also can make a positive influence to environment and community. After the analyzing, we found that specific product functional requirements in concepts get more attention from target users. In 11 design features, there are 4 needs correction. There are no significant difference in abstract product satisfaction. Only in northern area have higher satisfaction to “power”. Because northern area has a heavier business volume, they have a greater need to Auxiliary power of dray. In the last, using 3D modeling to present the innovation concept design which has been improved.
APA, Harvard, Vancouver, ISO, and other styles
7

TSAI, SHIN-JUNG, and 蔡欣融. "Integrating the TRIZ and Taguchi Method for Hair Accessory Design." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/kahd8n.

Full text
Abstract:
碩士<br>實踐大學<br>工業產品設計學系碩士在職專班<br>105<br>This study was tantamount to integrate the system design thought (TRIZ and Taguchi robust design method) and creative design (snow paper-cuts), used in the design of hair products. Through the recombination of creative contour and light texture, color, performing on the type of hair, the consumer concept of paper-cut art is, even more, infiltration in life. Infusing the paper-cut patterns into emotional awareness, as well as making the hair of the aesthetic appearance, this study tried to integrate the art of beauty altogether. The study is divided into three stages; firstly, using the pre-questionnaire and analysis, to explore hair design of product development, in view of the different age and hair accessory material configuration and design, then how to be more close to the user's requirements. Secondly, the integration of TRIZ innovation and Taguchi robust design method was adopted to organize an orthogonal table for a second questionnaire. In the third stage, we optimized the combination conditions for the design of hair design. This was done to obtain the market demand for the validation of satisfaction according to the results of the questionnaire. The research found that design thinking and perceptual creation, combined with system design could be more devoted to the upgrading of the overall market demand and practical.
APA, Harvard, Vancouver, ISO, and other styles
8

Huang, Shih-Chen, and 黃士甄. "Light Modern Wave - in Graphic Design for Furniture and Home Accessory." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/98886885770773487963.

Full text
Abstract:
碩士<br>輔仁大學<br>應用美術學系碩士班<br>97<br>It is the era of postmodernity, and discourses of Postmodernism thrive. Some postmodern designs emphasize the importance of idiosyncratic style. Slightly against this trend, one fashion intends to turn back to the embrace of the Minimalism but still infuses the elements of self-description in designs. The narrator coins a new term to brand this trend: the “Light Modern Wave.” This paper would discuss the “Light Modern Wave” mainly through the furniture and home accessory. Within the following discussion, this paper would like to prove that under the big frame of postmodernity, Light Modern Design inherits the spirit of modernism, later influencing the graphic design. The works of the narrator are presented through graphical imagery creation of huge sizes. They are photographs from several pieces of furniture and home accessory of light modern style designed by the new generation. The graphical formula demands the harmony of the idiosyncratic styles and the shapes of the industrial design. With the accompany of advertising sentences, the graphical image calls up the ultimate emotional desire of homely and comfortable atmosphere. Those were the overall application of Light Modern Design style. The purpose of this study was to integrate the returning phenomena of Minimalism, that is the “Light Modern Wave,” and its application to the graphic design which hopefully pioneering a new style in the current era. The contribution of this paper, on one hand, is giving a paranoiac discussion on the furniture and home accessory in the Light Modern Wave; on the other hand, it would construct a strong basis of the design objections and product identity. Furthermore, the narrator hopes to set up criteria of Light Modern design style in graphic design that resorts to simplicity and emotional requests in the creative works.
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Su Jia, and 蘇佳晨. "A Study of Consumer Preference for Subculture Style in Accessory Design." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/19106774151783698227.

Full text
Abstract:
碩士<br>大葉大學<br>設計暨藝術學院碩士班<br>101<br>Many designers look for inspiration hidden in subculture style. In such creating process, they often express subversive ideas, while creative ideas are emerging endlessly. In order to provide designers with a reference and direction, this study aims to explore consumer preferences for subculture style in accessory design found in a Taiwanese creative market. The goals of this study include: 1. to investigate consumer preference for subculture style in accessory design; 2. to analyze subculture designing principles applied in accessory design. The results of this questionnaire interview are: 1. the acceptance will increase as consumers get older. The form of products is the primal factor of considering buying. The most popular accessory designs possess elements of the form and functionality, which are “fashion logo style”, “ethnic style”, and “street style”; 2. Most subculture accessory designs imply the concept of subversion. Those with elements of the narrative and ideology are rather favored by consumers with designing background. Replacing the precious jewelry, the materials used in such designs are mostly copper, silver plating, acrylic, and so on. The author recommends that, through subculture design, if the designer can avoid the radical ideas in the subculture style, he or she can bridge the gap between consumers and the subculture. On one hand, consumer will sense the ideology and concept of the subculture. And, on the other hand, it makes the design products more unique and meaningful. Keyword: Subculture style, accessory design, Huashan cultural and creative market
APA, Harvard, Vancouver, ISO, and other styles
10

Lin, Xin-Yu, and 林歆語. "Gazing-Pairing Accessory Design for Cat Aficionado and Cat Design Statement by Xin-Yu Lin." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/z64gzf.

Full text
Abstract:
碩士<br>國立清華大學<br>藝術與設計學系所<br>107<br>In the past, domestic cats have always played the role of catching mice, tipping toward practical purposes, but now they are mostly raised by DINK and single families as a companion, indicating that the role of cats has gradually shifted into being family members or friends. A “Pairing Accessory” is a symbol that proves the relationship between the owner and cat. If the cat wears an accessory, it not only enables other people to recognize the relationship between the cat and its owner but also enhances the owner’s sense of identity toward the cat. This design takes the study of the emotional link between domestic cats and owners as the main axis in its focus toward matching accessories for pet and owner and design relevant pet accessories sets. First, the author, through the use of information gathered from literature review, studies the relationship between people and pets, Taiwan’s cat culture and the types of domestic cat accessories, and Taiwan’s relevant festive jewelry and related studies. For the research methodology, the author will draw up the questionnaire in advance, which will be used to collect information about the public’s general interests toward pet accessories, product preference, and selection. Then, the author will visit the pet product exhibition and local pet stores to investigate relevant pet collar brands to understand the current market trend. Through the results of the previously conducted research, the author will develop a pet brand marketing strategy, followed by the product design and execution, and after that, design a questionnaire to survey the public opinions on the author’s design. The design will be divided into two major series—“festive series” and “customized series,” which is then further divided into six themes. The “festive series” comprises four important festivals—“Chinese new year,” “valentine's day,” “cat festival,” and “birthday,” while the “customized series” is the customized design targeted at the two cats, “Candy” and “Meimei” raised by their respective owners. The festive series will be designed according to Taiwan's festival characteristics, while the custom series will be discussed and designed according to the income, personal style, and preferences of the two cat owners and the products will be finally produced and exhibited. Through product presentation during the exhibition and the survey of questionnaires after the event, it was found that cats are generally regarded by owners as children, and owners no longer think of cats as just pets. Matching accessories between owner and pet have more attraction power toward the female population who raise cats, and most consumers are fond of customized matching accessories and hope to own accessories specific to their pets' birthday or anniversary. Based on the above conclusion, in future brand management, the author will execute design development targeted at the consumers' needs.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Accessory design"

1

Canada Mortgage and Housing Corporation. The inclusion of made-to-convert lots in a new plan of subdivision : Department of Planning and Development, City of London, Ontario : [case study] =: Intégration de terrains réservés aux logements polyvalents dans un nouveau lotissement : Département de l'urbanisme et de l'aménagement, Municipalité de London, Ontario : [étude de cas]. Canada Mortgage and Housing Corporation = Société canadienne d'hypothèques et de logement, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

D'Amato, Gabriella. Moda e design: Stili e accessori del Novecento. B. Mondadori, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Accessory Design. Fairchild Books, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Huey, Sue, and Susie Draffan. Bag: The Ultimate Fashion Accessory. King Publishing, Laurence, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Terashima, Unknown. 100 Years of Bicycle Component and Accessory Design. Cycle Publishing/Van Der Plas Publications, 2017.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Data Book: 100 Years of Bicycle Component & Accessory Design. 2nd ed. VeloPress, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

McGee, Robin L., and Arnold S. Levine. Patterns for Costume Accessories: The Solution to Almost Any Costume Accessory Need. Costume & Fashion Press, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Noguchi and Van Der Plas Publications. 100 Years of Bicycle Component and Accessory Design: The Data Book (Cycling Resources) (Cycling Resources). Cycle Publishing, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Press, PinkRose. Face Chart Makeup Essential Design Accessory: Blank Face Charts to Practice 120 Looks for Makeup Artists, Essential Workbook, 8. 5x11. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Essential Design Accessory Makeup Face Chart: Blank Face Charts to Practice 120 Looks for Makeup Artists, Essential Workbook, 8. 5x11. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Accessory design"

1

Gupta, Abhishek, Akash Kaushik, and Vishwa Goswami. "Glame—Glass Holding Plate Accessory." In Design for Tomorrow—Volume 3. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0084-5_44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mukhopadhyay, Prabir. "Ergonomics in Fashion and Accessory Products: Comfort and Functionality." In Design Science and Innovation. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4534-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mukhopadhyay, Prabir. "Human Body Dimensions in Fashion and Lifestyle Accessory Products." In Design Science and Innovation. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4534-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Hesen. "Limitations of Accessory Design of Fashion Life Chain Stores Based on Internet Informatization." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43309-3_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sun, Yu, Xuyang Cao, Yunbo Yuan, Guang Zhao, Song Ma, and Haofan Li. "Fault Simulation and Experimental Validation of Accessory Transmission System." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1876-4_31.

Full text
Abstract:
AbstractAs an important part of the aero-engine, the accessory transmission system affects the operation status of the engine, and it is of great significance to carry out fault mechanism analysis and fault identification. This paper takes a certain type of aero-engine accessory transmission system as the research object, flexes the box using ANSYS, establishes a rigid-flexible coupling model under normal working conditions and fault conditions through ADAMS, and studies the vibration characteristics in single fault and multi-fault combination modes, such as unbalance of the shaft system, gear misalignment and gear broken tooth. Considering different load loading conditions, the dynamic simulation of the transmission system is carried out, the shafting displacement and box acceleration response are extracted, the time–frequency domain feature information of the vibration signal is analyzed, and the fault characteristics and fault types are corresponded one-to-one. The test bench for the principle prototype of the accessory transmission system is designed and built, and the experimental research is carried out. The results show that the simulation results have good consistency with the principle prototype test results, which verifies the rationality of the simulation model.
APA, Harvard, Vancouver, ISO, and other styles
6

Feng, Wenhan, and Yueyue Wang. "Urban Memory Accessor: Mechanical Design of Interactive Installation Based on Arduino." In Proceedings of the 2019 DigitalFUTURES. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8153-9_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Maggini, Massimo. "La competenza lessicale nei metodi d’insegnamento linguistico." In Competenza lessicale e apprendimento dell’Italiano L2. Firenze University Press, 2021. http://dx.doi.org/10.36253/978-88-5518-403-8.03.

Full text
Abstract:
The article analyzes the importance of the development of lexical competence within the various glottodidactic methods. In particular, it is highlighted how, at present, teaching vocabulary has definitively freed itself from a subordinate, almost accessory, position with respect to grammar teaching. The article then focuses on the role of the dictionary in learning vocabulary and on the necessary skills for its use. It is highlighted the lack, in Italian L2, of pedagogical dictionaries, i.e. simplified monolingual dictionaries specifically designed for a non-Italian speaking public. The article ends with the description of the most important corpora of Italian language, which could became useful operational tools in teaching vocabulary.
APA, Harvard, Vancouver, ISO, and other styles
8

"Anatomy of an accessory." In Basics Fashion Design 09: Designing Accessories. AVA Publishing SA, 2012. http://dx.doi.org/10.5040/9781474218306.ch-001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kuniavsky, Mike. "The Whirlpool Centralpark™ RefrigeratorThe Design of an Accessory Port." In Smart Things: Ubiquitous Computing User Experience Design. Elsevier, 2010. http://dx.doi.org/10.1016/b978-0-12-374899-7.00005-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Farrell, A. P. "DESIGN AND PHYSIOLOGY OF THE HEART | Accessory Hearts in Fishes." In Encyclopedia of Fish Physiology. Elsevier, 2011. http://dx.doi.org/10.1016/b978-0-12-374553-8.00243-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Accessory design"

1

S, Nivash Kumar, Suhail Ansari T. A, Minhas Naheem, Bala Siva Surya Pattu Arun, Manojkumar Lakshmanan, and Mohanasankar Sivaprakasam. "Design and Development of a Universal Accessory for Instruments and Implants Navigation in Image-Guided Spine Surgeries." In 2024 46th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). IEEE, 2024. https://doi.org/10.1109/embc53108.2024.10782709.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mukherjee, Siddhartha, Russell Mueller, and Mukundhan Chakram. "Flow and Heat Transfer Simulation in a Splash Lubricated Bell 525 Accessory Gearbox." In Vertical Flight Society 73rd Annual Forum & Technology Display. The Vertical Flight Society, 2017. http://dx.doi.org/10.4050/f-0073-2017-12148.

Full text
Abstract:
Operating temperatures in a drive system gearbox are impacted by multiple factors like mechanical power, operating environment, geometrical design and lubricant properties. Cooling and lubrication performance is critical to operation and durability. Oil properties like viscosity, specific gravity and thermal conductivity play a major role in determining the quality of lubrication inside the gearbox and the efficiency of waste heat exchange. The interaction of lubricating oil with gears and surrounding structures is however a complex multi-physical problem. Complete coupled modeling of the various micro and macro physical phenomena at play inside the gearbox is challenging and computationally expensive. For this reason, manufacturers have traditionally relied on experimental evaluations of prototype gear boxes for product development. A more desirable approach is to develop a full simulation capability to aid the design process and minimize development risk. To this end, a CFD methodology for the prediction of lubricating oil flow and heat transfer is developed. The methodology is applied and validated with the "splash lubricated" accessory gearbox of the Bell 525.
APA, Harvard, Vancouver, ISO, and other styles
3

Ropakshi, Parmeet Kaur, Vaibhavi Yadav, Vijay Kumar, and Narendra Kumar Chahar. "AccessArc: Transforming Digital Accessibility Through Secure AI-Powered Inclusive Design and Unified Service Integration." In 2025 First International Conference on Advances in Computer Science, Electrical, Electronics, and Communication Technologies (CE2CT). IEEE, 2025. https://doi.org/10.1109/ce2ct64011.2025.10939396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Radoi, Radu, Liliana Dumitrescu, Bogdan Tudor, Andrei Benescu, and Robert Blejan. "PHOTOVOLTAIC SYSTEM FOR POWERING A REMOTE ACTUATION SYSTEM." In 24th SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/4.1/s17.23.

Full text
Abstract:
In isolated areas without access to the grid where it is necessary to operate certain equipment, such as the operation of a valve in a mining area or some gates on a irrigation canals, an installation with fotovoltaic supply can be used. Considering the intermittent operation regime of the driven equipment, a solar-powered drive installation can be designed, and by storing the energy in a battery, operation can be ensured during the night as well. Thus, the PV power system must be sized (PV peak power, battery and inverter capacities) so as to support the power of a compact hydraulic power pack and accessory equipment. In order not to be damaged by the weather conditions, the equipment must be housed in a water-resistant enclosure The system must also be equipped with an energy management unit and remote control (GSM or LoRa Gateway). The article presents the realization of such a system and the tests carried out to monitor the production and consumption of electricity during several operating cycles.
APA, Harvard, Vancouver, ISO, and other styles
5

Trim, L. R. "Principles of accessory design." In IEE Colloquium on Ensuring the Reliability of 11 - 132 kV Cable Accessories. IEE, 1998. http://dx.doi.org/10.1049/ic:19980023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gregory, B. "Basic principles of accessory design." In IEE Two Day Colloquium on Supertension (66-500kV) Polymeric Cables and their Accessories. IEE, 1995. http://dx.doi.org/10.1049/ic:19951333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nassar, Alexander. "Design Concept of Magnesium Accessory Drive Brackets." In International Congress & Exposition. SAE International, 1991. http://dx.doi.org/10.4271/910553.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fleck, Wolfgang, Dominik Hollmuller, Johannes Wittmann, Gregor Aradi, Roman Beneder, and Martin Horauer. "dandel.io - Design of an audio-recorder accessory." In 2014 IEEE/ASME 10th International Conference on Mechatronic and Embedded Systems and Applications (MESA). IEEE, 2014. http://dx.doi.org/10.1109/mesa.2014.6935552.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kumar, Adil A., P. Sree Sai Sharan, Mohamed Rehan, B. N. Chandra Shekar, and Rajeshwari Hegde. "Design of a modular real time smart accessory." In 2015 International Conference on Applied and Theoretical Computing and Communication Technology (iCATccT). IEEE, 2015. http://dx.doi.org/10.1109/icatcct.2015.7456864.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Katou, Seiya, and Takashi Nakakuki. "Design of cantilever accessory for atomic force microscope." In 2012 IEEE 12th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2012. http://dx.doi.org/10.1109/nano.2012.6321920.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Accessory design"

1

Heifetz, Yael, and Michael Bender. Success and failure in insect fertilization and reproduction - the role of the female accessory glands. United States Department of Agriculture, 2006. http://dx.doi.org/10.32747/2006.7695586.bard.

Full text
Abstract:
The research problem. Understanding of insect reproduction has been critical to the design of insect pest control strategies including disruptions of mate-finding, courtship and sperm transfer by male insects. It is well known that males transfer proteins to females during mating that profoundly affect female reproductive physiology, but little is known about the molecular basis of female mating response and no attempts have yet been made to interfere with female post-mating responses that directly bear on the efficacy of fertilization. The female reproductive tract provides a crucial environment for the events of fertilization yet thus far those events and the role of the female tract in influencing them are poorly understood. For this project, we have chosen to focus on the lower reproductive tract because it is the site of two processes critical to reproduction: sperm management (storage, maintenance, and release from storage) and fertilization. E,fforts during this project period centered on the elucidation of mating responses in the female lower reproductive tract The central goals of this project were: 1. To identify mating-responsive genes in the female lower reproductive tract using DNA microarray technology. 2. In parallel, to identify mating-responsive genes in these tissues using proteomic assays (2D gels and LC-MS/MS techniques). 3. To integrate proteomic and genomic analyses of reproductive tract gene expression to identify significant genes for functional analysis. Our main achievements were: 1. Identification of mating-responsive genes in the female lower reproductive tract. We identified 539 mating-responsive genes using genomic and proteomic approaches. This analysis revealed a shift from gene silencing to gene activation soon after mating and a peak in differential gene expression at 6 hours post-mating. In addition, comparison of the two datasets revealed an expression pattern consistent with the model that important reproductive proteins are pre-programmed for synthesis prior to mating. This work was published in Mack et al. (2006). Validation experiments using real-time PCR techniques suggest that microarray assays provide a conservativestimate of the true transcriptional activity in reproductive tissues. 2.lntegration of proteomics and genomics data sets. We compared the expression profiles from DNA microarray data with the proteins identified in our proteomic experiments. Although comparing the two data sets poses analyical challenges, it provides a more complete view of gene expression as well as insights into how specific genes may be regulated. This work was published in Mack et al. (2006). 3. Development of primary reproductive tract cell cultures. We developed primary cell cultures of dispersed reproductive tract cell types and determined conditions for organ culture of the entire reproductive tract. This work will allow us to rapidly screen mating-responsive genes for a variety of reproductive-tract specifi c functions. Scientific and agricultural significance. Together, these studies have defined the genetic response to mating in a part of the female reproductive tract that is critical for successful fertllization and have identified alarge set of mating-responsive genes. This work is the first to combine both genomic and proteomic approaches in determining female mating response in these tissues and has provided important insights into insect reproductive behavior.
APA, Harvard, Vancouver, ISO, and other styles
2

Anzt, H., T. Cojean, and T. Gruetzmacher. Technical report: Design of the accessor. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1763198.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Accessory design' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography