Relevant bibliographies by topics / Accounting of technical improvements and repairs

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Conference papers

Academic literature on the topic 'Accounting of technical improvements and repairs'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Accounting of technical improvements and repairs.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Accounting of technical improvements and repairs"

1

Urman, Richard D. "A Contemporary Medicolegal Analysis of Injury Related to Peripheral Nerve Blocks." Pain Physician 4, no. 22;4 (2019): 389–99. http://dx.doi.org/10.36076/ppj/2019.22.389.

Full text
Abstract:
Background: Closed malpractice claims can provide insight into low-frequency adverse events in many areas of perioperative and chronic pain care. Over the last decade, there have been changes in surgical and regional anesthetic practice, likely impacting adverse event patterns. Given the wide variability and low frequency of complications associated with peripheral nerve blocks, the study of closed malpractice claims offers an opportunity to examine adverse events, and the patient, technical, and provider factors that led to the claim. Knowledge gained from examination of closed claims has alr
APA, Harvard, Vancouver, ISO, and other styles
2

Kayser, Georgia L., William Moomaw, Jose Miguel Orellana Portillo, and Jeffrey K. Griffiths. "Circuit Rider post-construction support: improvements in domestic water quality and system sustainability in El Salvador." Journal of Water, Sanitation and Hygiene for Development 4, no. 3 (2014): 460–70. http://dx.doi.org/10.2166/washdev.2014.136.

Full text
Abstract:
Small piped water supply systems are often unable to provide reliable, microbiologically safe, and sustainable service over time, and this has direct impacts on public health. Circuit Rider (CR) post-construction support (PCS) addresses this through the provision of technical, financial, and operational assistance to these systems. CRPCS operates in low and high-income countries; yet, no rigorous studies of CRPCS exist. We measured the impact of CRPCS on ‘water quality’ and ‘sustainability’ indicators (technical and administrative capacity, and water supply protection) in El Salvador. In this
APA, Harvard, Vancouver, ISO, and other styles
3

Burnett, Royce D., Don R. Hansen, and Olga Quintana. "Eco-Efficiency: Achieving Productivity Improvements through Environmental Cost Management." Accounting and the Public Interest 7, no. 1 (2007): 66–92. http://dx.doi.org/10.2308/api.2007.7.1.66.

Full text
Abstract:
The purpose of this study is to assess how identifying, tracking, and monitoring environmental costs can assist an agenda adopted to improve environmental performance. We do so by providing a theoretical discussion and contextual model of eco-efficiency that includes cost management as part of its activities. This approach draws on the quality management literature and the Porter hypothesis, which assumes that pollution is a form of technical inefficiency and that properly designed regulations stimulate firms to develop pollution control innovations. Our paper provides several specific contrib
APA, Harvard, Vancouver, ISO, and other styles
4

Ben-Yair, Avner, Dimitri Golenko-Ginzburg, and Zohar Laslo. "HARMONIZED DECISION‐MAKING IN MANAGING RELIABILITY AND SAFETY." Journal of Business Economics and Management 6, no. 1 (2005): 43–51. http://dx.doi.org/10.3846/16111699.2005.9636091.

Full text
Abstract:
A hierarchical technical system functioning under random disturbances and being subject to critical failures at the bottom level which may result in an accident or a hazardous condition including environmental safety violations at the upper level is considered. Certain primary elements at the bottom level, together with their corresponding primary failures, can be refined by undertaking technical improvement. The list of the latter is pre‐given as well. Assume that by means of simulation modeling (SM) it is possible to evaluate the increment of the system's reliability by implementing any set
APA, Harvard, Vancouver, ISO, and other styles
5

Elxan qızı Ağayeva, Ləman. "SAP SYSTEM DRILLING BLOCK, CLASSIFICATION AND CREATION OF APPROPRIATE PLATFORMS." SCIENTIFIC WORK 66, no. 05 (2021): 225–27. http://dx.doi.org/10.36719/2663-4619/66/225-227.

Full text
Abstract:
For companies wishing to monitor inspection and repair processes through the system, the module proposed by SAP as part of the enterprise source planning application is the SAP PM (Plant Maintance) module. The PM module manages all equipment faults and scheduled repairs. The module, which is integrated with procurement, cost accounting, financial and inventory management processes, can automatically order for technical needs, track your current and overhaul costs immediately, and prepare spare parts. Purchase and consumption operations related to the warehouse can be carried out through tracki
APA, Harvard, Vancouver, ISO, and other styles
6

Tsikhalevsky, I. S., and A. G. Rusakov. "A key indicator of the new business process of the organization of operation and repair as a tool for monitoring the technical condition of locomotives." Herald of the Ural State University of Railway Transport, no. 1 (2021): 40–45. http://dx.doi.org/10.20291/2079-0392-2021-1-40-45.

Full text
Abstract:
The revision of the business process of operation and repair of locomotives also led to revision of the indicators that characterize the quality of repairs and maintenance performed. The article considers a new indicator that characterizes the quality of work of locomotive repair enterprises of service companies. The components of the equation are investigated and the procedure for calculating the technical readiness coefficient is analyzed. The analysis of the order regulating the procedure for accounting for the time when the locomotive section is in the condition was made. According to the
APA, Harvard, Vancouver, ISO, and other styles
7

Kovalev, L. I., and I. L. Kovalev. "Calculation of the basic salary and key provisions of the methodology of determining the total costs for the technical service of machines and equipment in livestock." Sel'skohozjajstvennaja tehnika: obsluzhivanie i remont (Agricultural Machinery: Service and Repair), no. 2 (February 1, 2021): 58–65. http://dx.doi.org/10.33920/sel-10-2102-07.

Full text
Abstract:
The most important provisions of the methodology for calculating the basic wages of personnel of repair and maintenance departments and organizations operating in the livestock subcomplex of the agro-industrial complex are presented. The main points of the methodology for calculating the total costs of maintenance and repairs for machines and equipment of livestock farms and complexes are given in relation to the conditions and peculiarities of accounting and planning of repair and maintenance work in livestock raising. An example of practical calculation of costs for various types of maintena
APA, Harvard, Vancouver, ISO, and other styles
8

Husain, Al, Jaka Prima Maulana, and Yuli Widiastuti. "PERANCANGAN SISTEM APLIKASI REQUEST MAINTENANCE TEKNIK DI PERGURUAN TINGGI RAHARJA." Journal CERITA 3, no. 1 (2017): 49–63. http://dx.doi.org/10.33050/cerita.v3i1.620.

Full text
Abstract:
The development of information technology is growing rapidly, making the system change and develop until the need for the desired information can be accessed easily and accurately. Likewise with the operational Higher Education Prog who want the reliability of a system. In the case of operational procurement needs and improvements in Higher Education Prog until now carried out by the technical staff directly working on demand through telvon or speak directly, so inadequate as a reminder of the task request repairs and procurement activity reports Staff. Itcreates the application of the procure
APA, Harvard, Vancouver, ISO, and other styles
9

Söderholm, Peter. "Continuous Improvements of Complex Technical Systems: a Theoretical Quality Management Framework Supported by Requirements Management and Health Management." Total Quality Management & Business Excellence 15, no. 4 (2004): 511–25. http://dx.doi.org/10.1080/1478336042000183569.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Roy, Marie-Christine, Katherine Roy, and Lyne Bouchard. "Human factors in business process re-engineering." Human Systems Management 17, no. 3 (1998): 193–204. http://dx.doi.org/10.3233/hsm-1998-17305.

Full text
Abstract:
Many organizations have implemented radical changes through business process re-engineering (BPR) in recent years. In most cases, these changes have been necessary to meet the requirements of a more competitive and global market. Rather than focus on these economic objectives, this paper describes how several organizational transformations took human dimensions into account. The literature in information technology implementation and organizational change provides some important guidelines for integrating human factors into design considerations. Furthermore, it shows that technical, technolog
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Accounting of technical improvements and repairs"

1

Chalupová, Hana. "Technické zhodnocení budovy." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240050.

Full text
Abstract:
The diploma thesis presents the procedure for calculating the value of the technical improvements of building owner for accounting registration and taking account of another way to use of the building. In this work are explained the concepts related to technical improvements of building. The practical part deals with the practical example revitalization of the block of flats in which it is applied methodology for the technical improvements.
APA, Harvard, Vancouver, ISO, and other styles
2

Urban, Marek. "Daňové aspekty oprav a úprav dlouhodobého hmotného majetku." Master's thesis, Vysoká škola ekonomická v Praze, 2017. http://www.nusl.cz/ntk/nusl-360573.

Full text
Abstract:
The diploma thesis deals with the tax aspects of repairs and technical evaluation of tangible fixed assets, as well as aspects of creation of reserves for repair of tangible assets. The aim of the thesis is to identify problem areas of legal regulation in relation to this area and to propose their solution. The first part of the thesis summarizes the current legal regulations of the investigated area in the Czech Republic. Summary is followed by a case study based on a real tax audit, which demonstrates problem areas of legal regulation. The conclusion of the case study is the comparison of th
APA, Harvard, Vancouver, ISO, and other styles
3

Krejčík, Martin. "Dlouhodobá hmotná aktiva v účetním zobrazení se zaměřením na daňové souvislosti." Master's thesis, Vysoká škola ekonomická v Praze, 2016. http://www.nusl.cz/ntk/nusl-264563.

Full text
Abstract:
This diploma thesis focuses on the tangible fixed assets of the accounting and tax perspective. The analysis of the first part of this thesis proceeds in basic theoretical and legislative framework, both in Czech and international perspective. There is also analyzed the cycle of tangible fixed assets, which is dealt with in detail their acquisition, use and disposal. In the practical part there are selected facts, which took place at the company engaged in property lease and tangible assets directly related. These facts are then commented on accounting and tax perspective.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Accounting of technical improvements and repairs"

1

Office, General Accounting. Federal research: Aging federal laboratories need repairs and upgrades : report to the Vice Chairman, Joint Economic Committee, U.S. Congress. The Office, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Toye, John. Development as economic growth, 1956–. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780198723349.003.0008.

Full text
Abstract:
Economists often conflate the theory of economic development with the theory of economic growth. This practice has become increasingly popular since Robert Solow made elegant improvements to the Harrod–Domar growth model, but left it unclear whether it was meant to be applicable in developing countries. Solow’s model has one sector only and aggregates growth as increased GNP. It has no place for changes in the balance between economic sectors that characterize development. A related technique is growth accounting, which disaggregates growth into amounts generated by capital and labour inputs,
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Accounting of technical improvements and repairs"

1

Batailly, Alain, Mathias Legrand, Antoine Millecamps, Sèbastien Cochon, and François Garcin. "Redesign of a High-Pressure Compressor Blade Accounting for Nonlinear Structural Interactions." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-25673.

Full text
Abstract:
Recent numerical developments dedicated to the simulation of rotor/stator interaction involving direct structural contacts have been integrated within the Snecma industrial environment. This paper presents the first attempt to benefit from these developments and account for structural blade/casing contacts at the design stage of a high-pressure compressor blade. The blade of interest underwent structural divergence after blade/abradable coating contact occurrences on a rig test. The design improvements were carried out in several steps with significant modifications of the blade stacking law w
APA, Harvard, Vancouver, ISO, and other styles
2

Whitaker, Steven M., and Jeffrey P. Bons. "An Improved Particle Impact Model by Accounting for Rate of Strain and Stochastic Rebound." In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-77158.

Full text
Abstract:
A methodology for informing physics-based impact and deposition models through the use of novel experimental and analysis techniques is presented. Coefficient of Restitution (CoR) data were obtained for Arizona Road Dust (ARD), AFRL02 dust, and each component of AFRL02 impacting a Hastelloy X plate at a variety of flow temperatures (295–866 K), surface temperatures (295–1255 K), particle velocities (0–100 m/s), and impact angles (0–90 degrees). High speed Particle Shadow Velocimetry (PSV) allowed individual impact data to be obtained for more than 8 million particles overall, corresponding to
APA, Harvard, Vancouver, ISO, and other styles
3

Batailly, Alain, and Antoine Millecamps. "Minimising Clearance Consumption: A Key Factor for the Design of Blades Robust to Rotor/Stator Interactions?" In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-56721.

Full text
Abstract:
The recent development of a numerical strategy dedicated to the simulation of rotor/stator interactions stemming from structural contacts in modern aircraft engines led to the first optimization of a high-pressure compressor blade profile accounting for criteria related to non-linear contact simulations. This optimization procedure revealed very significant improvements in terms of amplitudes of vibration but failed to identify key design parameters. Satisfying numerical results were obtained by a minor modification of a combination of many design parameters. Based on this observation, this co
APA, Harvard, Vancouver, ISO, and other styles
4

Eitenmüller, Johannes, Manuel Wilhelm, Leonhard Gresser, et al. "Highly Accurate Delta Efficiency Measurements at the Large Scale Turbine Rig." In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-90294.

Full text
Abstract:
Abstract High pressure turbines are nowadays designed to a point where most design enhancements only yield marginal efficiency improvements. This challenges research facilities to reliably resolve ever smaller differences in efficiency caused by individual design changes. In recent years, immense efforts towards such highly accurate delta-efficiency measurements have been undertaken at the Large Scale Turbine Rig (LSTR). This paper comprises an overview of the applied methodology and the achievements on the basis of various validation cases. By thoroughly controlling the operation point and ac
APA, Harvard, Vancouver, ISO, and other styles
5

Buske, Clemens, Wolfram C. Ullrich, and Ingo Roehle. "Numerical Study of Incidence Angles and Gap Heights in Turbine Cascades and Rotors on Tip Clearance Losses." In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-94872.

Full text
Abstract:
The design and optimization of turbines demands the use of fast low-fidelity tools. To obtain adequate results, loss correlations simplifying the complex turbine throughflow are implemented. Accounting for modern turbine designs and flow conditions, revisions of profile and secondary loss correlations were primarily focused upon, while improvements of the tip clearance loss correlations are difficult to achieve. Realistic engine-like conditions concerning variations of the tip clearance, blade loading and solidity are time- and cost-intensive to investigate. This paper is focused on an extensi
APA, Harvard, Vancouver, ISO, and other styles
6

Lim, Jamie, Christopher A. Perullo, Joe Milton, et al. "The EPRI Gas Turbine Digital Twin – a Platform for Operator Focused Integrated Diagnostics and Performance Forecasting." In ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/gt2021-59572.

Full text
Abstract:
Abstract EPRI has been developing a digital twin of simple and combined cycle gas turbines over the last 5+ years to provide owners and operators with improved capabilities that typically reside in the expert domain of OEMs and 3rd party service providers. The digital twin is a digital model, a physics-based representation of the actual asset. The model is thermodynamic and is created with the intent to support 5 M&D areas: • Integrate with existing M&D tools such as advanced pattern recognition (APR) • Power plant performance prediction and trending such as day, week, and month ahead
APA, Harvard, Vancouver, ISO, and other styles
7

Matzgeller, Roland, Alexander Bleh, and Daniela Klaubert. "Development of a Comprehensive Model for Plasma Actuation in 3D-RANS-Simulations." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-56379.

Full text
Abstract:
Being a comparably new technology, plasma actuation as a method to influence the flow in turbomachines has been investigated with a lot of effort in the past few years. Most of these investigations related to turbomachinery applications were carried out numerically using extensions to various RANS-codes and showed rather good improvements of the flow, particularly when using plasma actuators to suppress separations. Although most of these works gave a good impression of the capabilities of plasma actuators a comprehensive model of plasma actuation accounting for the impact of local static pres
APA, Harvard, Vancouver, ISO, and other styles
8

Narasimhan, Sridhar, and Avram Bar-Cohen. "Compact Modeling of Unshrouded Plate Fin Heat Sinks." In ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35327.

Full text
Abstract:
The present work considers the compact modeling of unshrouded parallel plate heat sinks in laminar forced convection. The computational domain includes three heat sinks in series, cooled by an intake fan. The two upstream heat sinks are represented as “porous blocks”, each with an effective thermal conductivity and a pressure loss coefficient, while the downstream heat sink, assumed to be the component requiring the most accurate characterization, is modeled in detail. A large parametric space covering three typical heat sink geometries, as well as a range of common inlet velocities, separatio
APA, Harvard, Vancouver, ISO, and other styles
9

San Andrés, Luis, and Yingkun Li. "Effect of Pad Flexibility on the Performance of Tilting Pad Journal Bearings: Benchmarking a Predictive Model." In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-42776.

Full text
Abstract:
Tilting pad journal bearings (TPJBs) supporting high performance turbomachinery rotors have undergone steady design improvements to satisfy ever stringent operating conditions that include large specific loads due to smaller footprints, and high surface speeds that promote flow turbulence and thus larger drag power losses. Simultaneously, predictive models continuously evolve to include minute details on bearing geometry, pads and pivots’ configurations, oil delivery systems, etc. In general, predicted TPJB rotordynamic force coefficients correlate well with experimental data for operation wit
APA, Harvard, Vancouver, ISO, and other styles
10

Efthymiou, Mike, and Jan Willem van de Graaf. "Reliability and (Re)Assessment of Fixed Steel Structures." In ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2011. http://dx.doi.org/10.1115/omae2011-50253.

Full text
Abstract:
This paper reviews the structural integrity and reliability of fixed steel offshore structures with a focus on improved models and incorporation of these models in design standards. Technical achievements in four key areas are reviewed which, when combined, resulted in a step improvement in the calculation of structural reliability. The first area is the extreme environmental loading on an offshore platform; the second area is the joint occurrence of waves, winds and currents, i.e. accounting for the fact that these do not, in general, peak at the same time and do not act in the same direction
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography