Relevant bibliographies by topics / Acetone smoothing

Contents

  1. Journal articles
  2. Conference papers

Academic literature on the topic 'Acetone smoothing'

Author: Grafiati
Published: 5 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Acetone smoothing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Acetone smoothing"

1

Coppola, Antonio, Filomena Impero, Cuono Ruggiero, Fabrizio Scala, and Antonino Squillace. "Set-Up of an Experimental Procedure for the Surface Smoothing of FDM Parts through Acetone Vapor." Key Engineering Materials 813 (July 2019): 447–52. http://dx.doi.org/10.4028/www.scientific.net/kem.813.447.

Full text
Abstract:
Fused deposition modeling (FDM) is an additive manufacturing technology where three-dimensional physical models are manufactured by layer-by-layer deposition. However, the layered surface built with FDM suffers from poor surface quality and dimensional accuracy even for basic part geometries. This proves to be unacceptable and not satisfactory for most general purposes with the consequence of a decreased value of the final product. Several methods for post-processing were proposed to achieve fine surface of manufactured components. In particular, for components manufactured with polylactic aci
APA, Harvard, Vancouver, ISO, and other styles
2

Lalehpour, Amirali, Conner Janeteas, and Ahmad Barari. "Surface roughness of FDM parts after post-processing with acetone vapor bath smoothing process." International Journal of Advanced Manufacturing Technology 95, no. 1-4 (2017): 1505–20. http://dx.doi.org/10.1007/s00170-017-1165-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gao, Harry, Dorcas V. Kaweesa, Jacob Moore, and Nicholas A. Meisel. "Investigating the Impact of Acetone Vapor Smoothing on the Strength and Elongation of Printed ABS Parts." JOM 69, no. 3 (2016): 580–85. http://dx.doi.org/10.1007/s11837-016-2214-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baluyut, Rosa Mae D., Jan Rapaela B. Bartolome, H. Romel B. De Guzman, et al. "Design Optimization of DR3AM Vapor Polishing Device for ABS 3D-Printed Parts." Advance Sustainable Science Engineering and Technology 5, no. 2 (2023): 0230207. http://dx.doi.org/10.26877/asset.v5i2.16271.

Full text
Abstract:
3D printing is an additive manufacturing method that turns digital design into an actual product. A 3D-printed part sometimes requires post-processing to enhance its physical and mechanical properties. Acetone vapor polishing is one of those techniques which is highly beneficial in smoothing ABS 3D-printed parts. Previously, an acetone vapor polishing device has been developed which uses a mist maker. However, for a more efficient polishing method, an optimized vapor polishing device using heat has been fabricated in this study. To assess the efficiency of this device, the researchers test the
APA, Harvard, Vancouver, ISO, and other styles
5

Pestano, Viviane, Mariana Pohlmann, and Fabio Pinto da Silva. "Effect of Acetone Vapor Smoothing Process on Surface Finish and Geometric Accuracy of Fused Deposition Modeling ABS Parts." Journal of Materials Science and Chemical Engineering 10, no. 10 (2022): 1–9. http://dx.doi.org/10.4236/msce.2022.1010001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shaffer, Ronald E., and Roger J. Combs. "Comparison of Spectral and Interferogram Processing Methods Using Simulated Passive Fourier Transform Infrared Remote Sensing Data." Applied Spectroscopy 55, no. 10 (2001): 1404–13. http://dx.doi.org/10.1366/0003702011953540.

Full text
Abstract:
Computer-generated synthetic single-beam spectra and interferograms provide a means of comparing signal processing strategies that are employed with passive Fourier transform infrared (FT-IR) sensors. With the use of appropriate radiance models and spectrometer characteristics, synthetic data are generated for one-, two-, and four-component mixtures of organic vapors (ethanol, methanol, acetone, and methyl ethyl ketone) in two passive FT-IR remote sensing scenarios. The single-beam spectra are processed by using Savitsky–Golay smoothing and first-derivative and second-derivative filters. Inter
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, W. L., W. H. Huang, and W. H. Lai. "Investigation of flow characteristics of various-aspect-ratio rectangular nozzles with an aft deck." Shock Waves 34, no. 6 (2024): 527–38. https://doi.org/10.1007/s00193-024-01188-z.

Full text
Abstract:
AbstractThis study presents an experimental and numerical investigation to characterize the plume pattern of a high-aspect-ratio rectangular convergent/divergent nozzle with an aft deck in under-expanded conditions. The function of an aft deck is to shield the infrared signal of an exhaust plume at its strongest intensity located at the immediate downstream region of the nozzle exit. However, this practice may cause undesirable plume deflection, which needs to be reduced as much as possible. The nozzle pressure ratios ranged from 2 to 4, and the effect of the nozzle exit aspect ratio was exami
APA, Harvard, Vancouver, ISO, and other styles
8

Shmoilov, Evgeniy, Mikhail Fedotov, Igor Sharutin, et al. "POLYMER COMPOSITES FOR EXTERNAL REINFORCEMENT OF BUILDING STRUCTURES." International Journal for Computational Civil and Structural Engineering 20, no. 1 (2024): 21–34. http://dx.doi.org/10.22337/2587-9618-2024-20-1-21-34.

Full text
Abstract:
Key aspects of developing effective systems for the external reinforcement of building structures, made of composite polymer materials containing carbon fibers and no-bake polymer binders, ensuring shape formation in the temperature range of 15 - 40 °С no more than 24 hours, characterized by operability in the temperature range from minus 45 ° C to plus 60 ° C.. PCM-based SVA has a number of advantages compared to clips and metal profiles traditionally used for repairing building structures: the load-bearing capacity of the rods increases, the cost of the strengthening of load-bearing structur
APA, Harvard, Vancouver, ISO, and other styles
9

Dr., Swaroopa Rani N. Gupta. "Determination of Lecithin from egg yolk, milk, soyabean seed, sunflower oil Calorimetrically and its FTIR study." Int. Res. Journal of Science & Engineering, 2024 12, no. 1 (2024): 17–27. https://doi.org/10.5281/zenodo.12702228.

Full text
Abstract:
Lecithin is a generic term to designate any group of yellow-brownish fatty substances occurring in animal and plant tissues which are amphiphilic – they attract both water and fatty substances, and are used for smoothing food textures, emulsifying, homogenizing liquid mixtures, and repelling sticking materials. Lecithin’s are mixtures of glycerophospholipids including phosphatidylcholine, phosphatidyl-ethanolamine, phosphatidylinositol, phosphatidylserine, and phosphatidic acid. Lecithin can easily be extracted chemically using solvents such as hexane, ethanol, acetone, petroleum e
APA, Harvard, Vancouver, ISO, and other styles
10

Yan, Jie, and Deng-Guang Yu. "Smoothening electrospinning and obtaining high-quality cellulose acetate nanofibers using a modified coaxial process." Journal of Materials Science 47, no. 20 (2012): 7138–47. http://dx.doi.org/10.1007/s10853-012-6653-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Conference papers on the topic "Acetone smoothing"

1

Bae, Heechang, Eric Rada, Tyler Scheff, Matthew Michaelis, and Awlad Hossain. "Exploring the Influence of Acetone Vapor Processing and Subsequent Drying Methods on the Fatigue Performance of 3D Printed ABS Parts." In ASME 2024 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2024. https://doi.org/10.1115/imece2024-141531.

Full text
Abstract:
Abstract Fused Deposition Modeling (FDM), a method in additive manufacturing and 3D printing, is extensively utilized where materials are melted, extruded, and layered to fabricate a desired object. Recently applications of FDM technologies have surged extending not only to rapid prototyping but also to the mass production of finalized products. Components in 3D printing are often formed in distinct layers which inherently introduces structural unpredictability due to discontinuities, voids and insufficient inter-layer adhesion. In earlier research we effectively explored the discrepancies in
APA, Harvard, Vancouver, ISO, and other styles
2

Bae, Heechang Alex, Mickenzie Kinney, Tyler Scheff, Matthew Michaelis, and Awlad Hossain. "Investigating the Effects of Acetone Vapor Treatment Conditions and Post Drying Methods on Surface Roughness and Tensile Strength of 3D Printed ABS Components." In ASME 2023 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/imece2023-113811.

Full text
Abstract:
Abstract Additive manufacturing (AM) or 3D printing is a fabrication process, usually layer upon layer, of joining materials to make the desired objects directly from a 3D model. 3D printing allows for complex geometries that would be difficult, if not impossible to create using traditional subtractive methods such as milling, grinding, casting, etc. The nature of the additive process also allows the user to avoid or minimize costs that would be incurred if setting up with a traditional subtractive process. With AM there is no need for fixtures, tooling, or multiple processes to complete the p
APA, Harvard, Vancouver, ISO, and other styles
3

Kale, Aneesh Vijay, and Anand Krishnasamy. "Operation Range Extension of Homogeneous Charge Compression Ignited Small-Bore Off-Road Diesel Engine Using Acetone-Gasoline Blends." In Small Powertrains and Energy Systems Technology Conference. SAE International, 2023. http://dx.doi.org/10.4271/2023-01-1800.

Full text
Abstract:
<div class="section abstract"><div class="htmlview paragraph">The Homogeneous Charge Compression Ignition (HCCI) combustion eliminates the issues of higher particulate matter and nitrogen oxides emissions that prevail in the traditional compression ignition (CI) combustion mode. The complete replacement of traditional fuels with renewable fuels for internal combustion engines is challenging because significant infrastructure changes in the production and delivery systems are required to ensure renewable fuel availability and economic feasibility. Thus, the use of renewable acetone
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Acetone smoothing' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography