Log in

Relevant bibliographies by topics / Acoustic baffles

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Acoustic baffles'

Author: Grafiati

Published: 4 June 2021

Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Acoustic baffles.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Acoustic baffles"

1

Eisinger, F. L., and R. E. Sullivan. "Suppression of Acoustic Waves in Steam Generator and Heat Exchanger Tube Banks." Journal of Pressure Vessel Technology 125, no. 2 (2003): 221–27. http://dx.doi.org/10.1115/1.1565079.

Full text

Abstract:

Tube banks located in flow channels and exposed to crossflow have a low resistance to acoustic resonance and vibration in general. Such resistance can be increased substantially by placing acoustic baffles inside the tube banks. The locations and the number of baffles play an important role in the degree of their effectiveness of suppressing acoustic waves. One or two baffles placed within a tube bank will raise the threshold to acoustic vibration significantly. Optimum baffle locations suppressing acoustic resonance and vibration or reducing noise levels at resonance can be determined. A gene

APA, Harvard, Vancouver, ISO, and other styles

2

Duan, Runze, Yifan Cao, Hongbin Duan, et al. "Effect of the inner-surface baffles on the tangential acoustic mode in the cylindrical combustor." Open Physics 18, no. 1 (2020): 1215–22. http://dx.doi.org/10.1515/phys-2020-0187.

Full text

Abstract:

Abstract The combustion instability in a propulsion system is a ubiquitous problem. The radial baffles usually installed on the injector faceplate eliminate the combustion instability (acoustic pressure oscillation) in the propulsion system. In this article, the longitudinal baffles are installed on the inner surface of the combustor wall to control the combustion instabilities. The first-order and second-order tangential modes are induced in the experiments. The effects of the parameters of the baffle on the acoustic pressure oscillation in the cylindrical combustor are investigated. The effe

APA, Harvard, Vancouver, ISO, and other styles

3

Eisinger, F. L. "Unusual Acoustic Vibration of a Shell and Tube Process Heat Exchanger." Journal of Pressure Vessel Technology 116, no. 2 (1994): 141–49. http://dx.doi.org/10.1115/1.2929568.

Full text

Abstract:

Acoustic vibration was experienced in a shell and tube process heat exchanger over a large range of operating conditions. Test and analysis results confirmed that the vibration was of an unusual type, characterized by a predominantly longitudinal acoustic wave rather than the usual diametral one. The typical approach of adding acoustic baffles or changing the baffle arrangement leads to relatively small frequency shifts which do not assure elimination of the problem. It is proposed to solve this problem by introducing sufficient acoustic damping to prevent the establishment of the longitudinal

APA, Harvard, Vancouver, ISO, and other styles

4

Szemela, Krzysztof, Wojciech P. Rdzanek, and Witold J. Rdzanek. "Acoustic Power Radiated by a System of Two Vibrating Circular Membranes Located at the Boundary of Three-Wall Corner Spatial Region." Archives of Acoustics 37, no. 4 (2012): 463–73. http://dx.doi.org/10.2478/v10168-012-0058-8.

Full text

Abstract:

Abstract Two vibrating circular membranes radiate acoustic waves into the region bounded by three infinite baffles arranged perpendicularly to one another. The Neumann boundary value problem has been investigated in the case when both sources are embedded in the same baffle. The analyzed processes are time harmonic. The membranes vibrate asymmetrically. External excitations of different surface distributions and different phases have been applied to the sound sources’ surfaces. The influence of the radiated acoustic waves on the membranes’ vibrations has been included. The acoustic power of th

APA, Harvard, Vancouver, ISO, and other styles

5

Werkhoven, C. J., and S. G. Bradley. "The Design of Acoustic Radar Baffles." Journal of Atmospheric and Oceanic Technology 14, no. 3 (1997): 360–67. http://dx.doi.org/10.1175/1520-0426(1997)014<0360:tdoarb>2.0.co;2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Koren, Daniel M. "OFFSET BAFFLES FOR ACOUSTIC SIGNAL ARRIVAL SYNCHRONIZATION." Journal of the Acoustical Society of America 131, no. 4 (2012): 3192. http://dx.doi.org/10.1121/1.4707450.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hernandez, R., S. Jung, and K. I. Matveev. "Acoustic energy harvesting from vortex-induced tonal sound in a baffled pipe." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 225, no. 8 (2011): 1847–50. http://dx.doi.org/10.1177/0954406211406017.

Full text

Abstract:

Energy of high-amplitude sound that often appears in acoustic resonators with mean flow can be harnessed and converted into electricity for powering sensors and other devices. In this study, tests were conducted in a simple setup consisting of a pipe with a pair of baffles and a piezoelement. Tonal sound, corresponding to the second acoustic mode of the resonator, was excited due to vortex shedding/impinging on baffles in the presence of mean flow. Generated sound energy was partially converted into electrical energy by a piezoelement. About 0.55 mW of electric power was produced on a resistiv

APA, Harvard, Vancouver, ISO, and other styles

8

Chiu, Min-Chie, and Ying-Chun Chang. "An Assessment of High-Order-Mode Analysis and Shape Optimization of Expansion Chamber Mufflers." Archives of Acoustics 39, no. 4 (2015): 489–99. http://dx.doi.org/10.2478/aoa-2014-0053.

Full text

Abstract:

Abstract A substantial quantity of research on muffler design has been restricted to a low frequency range using the plane wave theory. Based on this theory, which is a one-dimensional wave, no higher order wave has been considered. This has resulted in underestimating acoustical performances at higher frequencies when doing muffler analysis via the plane wave model. To overcome the above drawbacks, researchers have assessed a three-dimensional wave propagating for a simple expansion chamber muffler. Therefore, the acoustic effect of a higher order wave (a high frequency wave) is considered he

APA, Harvard, Vancouver, ISO, and other styles

9

Chabbey, Adrien, Stuart Bradley, and Fernando Porté-Agel. "Scale Model Evaluation and Optimization of Sodar Acoustic Baffles." Journal of Atmospheric and Oceanic Technology 32, no. 3 (2015): 507–17. http://dx.doi.org/10.1175/jtech-d-13-00253.1.

Full text

Abstract:

AbstractA 21:1 scaled sodar, operating at 40 kHz, has been built and tested in the laboratory. Sodars, which use sound scattered by turbulence to profile the lowest few hundred meters of the atmosphere, need good acoustic shielding to diminish annoyance and to reduce unwanted reflections from nearby objects. Design of the acoustic shielding is generally inhibited by the difficulty of testing on full-scale systems and uncertainty as to accuracy of models. In contrast, the scale model approach described allows for “bench testing” of many designs under controlled conditions, and efficient compari

APA, Harvard, Vancouver, ISO, and other styles

10

Moore, J. A. "Acoustic propagation through baffles with rectangular compliant tubes." Journal of the Acoustical Society of America 89, no. 2 (1991): 637–47. http://dx.doi.org/10.1121/1.400388.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Acoustic baffles"

1

Hudjetz, Stefan. "Experimental investigation of heat exchange between thermal mass and room environments." Thesis, De Montfort University, 2012. http://hdl.handle.net/2086/9021.

Full text

Abstract:

The different technologies of passive cooling concepts have to rely on a good thermal coupling between a building's thermal mass and indoor air. In many cases, the ceiling is the only surface remaining for a good coupling. Further research is necessary to investigate discrepancies between existing correlations. Therefore, the overall aim of the work described in this thesis is the investigation of heat transfer at a heated ceiling in an experimental chamber. Acoustic baffles obstruct the surface of the ceiling and impede heat transfer. However, there is nearly no published data about the effec

APA, Harvard, Vancouver, ISO, and other styles

2

Xiaowan, Su. "Acoustics of parallel baffles muffler with Micro-perforated panels." Thesis, KTH, MWL Marcus Wallenberg Laboratoriet, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-48590.

Full text

Abstract:

Micro-perforated panels (MPP) have a good acoustic damping performance and a potential to be used in mufflers [1, 2]. This thesis aims to investigate the acoustic performance of a parallel baffles muffler, which consists of MPP baffles. The work is both experimental and numerical, i.e., a model is developed for a MPP baffles muffler with local reaction. The prototype MPP mufflers tested in the thesis were all produced by the Swedish company Sontech. First, the experiments were based on the procedure for experimental characterization of heat exchangers described in Ref. [5]. The transmission lo

APA, Harvard, Vancouver, ISO, and other styles

3

Edgerton, James Becton. "Finite amplitude acoustic waves generated by a baffled, multiharmonic transducer." Diss., Georgia Institute of Technology, 1988. http://hdl.handle.net/1853/17898.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sun, Renfei. "Cavity-enhanced jetting sound produced by a baffled piston." Thesis, Boston University, 2014. https://hdl.handle.net/2144/21259.

Full text

Abstract:

Thesis (M.Sc.Eng.) PLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis or dissertation. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you.<br>When a circular piston vibrates within an aperture of a baffle, the flow within the annular gap between the piston and the baffle is opposite in phase, which causes a reduction in the radiated sound. That is, the acoustic powe

APA, Harvard, Vancouver, ISO, and other styles

5

Li, Xiangyu. "Sound produced by a cavity-backed baffled piston with a large side-edge gap." Thesis, Boston University, 2014. https://hdl.handle.net/2144/21207.

Full text

Abstract:

Thesis (M.Sc.Eng.) PLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis or dissertation. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you.<br>In previous works, baffled-piston with small ratio of piston radius a over the baffle wall aperture radius b, or say, small gap was discussed on subjects mainly focused on acoustics gains. In this thesis, we focus more on baff

APA, Harvard, Vancouver, ISO, and other styles

6

Too, Gee-Pinn James. "Analytical and numerical approaches for finite amplitude sound beams radiated from a circular baffled piston." Diss., Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/16917.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Goueygou, Marc. "Formulation explicite de la réponse impulsionnelle de sources planes non bafflées : application au calcul du rayonnement acoustique des structures vibrantes." Valenciennes, 1997. https://ged.uphf.fr/nuxeo/site/esupversions/01f4b2b2-cfee-44ed-9ff4-28b2d7bc04f8.

Full text

Abstract:

Le travail présenté dans ce mémoire consiste à développer et a valider une nouvelle méthode de calcul du rayonnement acoustique des structures vibrantes. Cette méthode s'applique au cas de sources planes non bafflées de géométrie quelconque. Contrairement aux méthodes basées sur l'équation intégrale (BIE), elle repose sur une formulation explicite de la réponse impulsionnelle du système source, milieu de propagation, point d'observation. Cette formulation constitue une généralisation de l'intégrale de Rayleigh au cas de sources non bafflées. D’autre part, le calcul numérique de la réponse est

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Jundong. "ANALYTICAL AND BOUNDARY ELEMENT SOLUTIONS OF BULK REACTING LINED DUCTS AND PARALLEL-BAFFLE SILENCERS." UKnowledge, 2017. http://uknowledge.uky.edu/me_etds/96.

Full text

Abstract:

Lined silencers of various configurations are used to attenuate the noise from building HVAC equipment, gas turbines, and other machinery. First-mode analytical solutions are presented for sound attenuation along rectangular lined ducts, parallel-baffle silencers, and circular lined ducts. The sound absorptive lining is treated using a bulk property model. The analytical solutions entail solving a nonlinear characteristic equation in the transverse direction after the rigid-wall boundary condition is applied. The solution is compared to the boundary element solution and a local impedance analy

APA, Harvard, Vancouver, ISO, and other styles

9

Embleton, Steven Thomas. "Methodology for the design of hydrophone acoustic baffles and supporting materials." Thesis, 2011. http://hdl.handle.net/2152/ETD-UT-2011-08-3899.

Full text

Abstract:

One key element of underwater transducer design is the acoustic baffle. Acoustic baffles isolate a structure, such as a submarine hull, from noise and vibration produced by the active elements of the transducer and vice versa. Baffle materials must meet many conflicting requirements such as the need to be lightweight while providing high acoustic isolation. Currently Syntactic Acoustic Damping Material (SADM) is widely used as the primary acoustic baffle material. However, SADM baffles have many undesirable characteristics such as high density, poor machinability, high lead content and depth d

APA, Harvard, Vancouver, ISO, and other styles

10

Horoshenkov, Kirill V., and K. Sakagami. "A method to calculate the acoustic response of a thin, baffled, simply supported poroelastic plate." 2001. http://hdl.handle.net/10454/3487.

Full text

Abstract:

No<br>The Helmholtz integral equation formulation is used to produce the solution for the acoustic field reflected from a finite, thin, poroelastic plate in a rigid baffle with simply supported edges. The acoustic properties of the porous material are predicted using the effective fluid assumption. The solutions for the displacement of the plate and for the loading acoustic pressures are given in the form of the sine transform. The sine transform coefficients are obtained from the solution of a system of linear equations resulting from three integral Helmholtz formulations which relate the dis

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Acoustic baffles"

1

Interaction of acoustic waves generated by coupled plate. Center for Acoustics and Vibration, Florida Atlantic University, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Acoustic baffles"

1

Kumar, Sandeep, and K. Ravi. "Investigation of the Combined Effect of Perforated Tube, Baffles, and Porous Material on Acoustic Attenuation Performance." In Advances in Automotive Technologies. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5947-1_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ginsberg, Jerry H. "Radiation from a Source in a Baffle." In Acoustics-A Textbook for Engineers and Physicists. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56847-8_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Jianfei, Ji, Liang Guolong, Zhang Guangpu, and Li Yang. "Influences on the Directivity of Acoustic Vector Sensor by Soft Finite Cylinder Baffle." In Communications in Computer and Information Science. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-18134-4_47.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Eargle, John M. "Acoustical Power Output Produced on One Side of a Piston in a Large Baffle as a Function of Amplitude, Radius, and Frequency." In Electroacoustical Reference Data. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2027-6_39.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

"Parallel Baffle Muffler (Multipass Lined Duct) Parallel Baffle Muffler." In Formulas of Acoustics. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76833-3_248.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

"Micro-Perforated Helmholtz Panel Parallel Baffle Muffler Parallel Baffle Muffler micro-perforated Helmholtz panel parallel baffle muffler." In Formulas of Acoustics. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76833-3_246.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

"Absorbent Strip in a Hard Baffle Wall, with Far Field Distribution absorber in baffle wall strip in baffle wall." In Formulas of Acoustics. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76833-3_57.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

"Plane Radiator in a Baffle Wall plane radiator radiator plane radiator in a baffle." In Formulas of Acoustics. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76833-3_110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

"Strip-Shaped Wall in Infinite Baffle Wall sound transmission through strip-shaped wall in infinite baffle wall." In Formulas of Acoustics. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76833-3_165.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

"A Ring-Shaped Piston in a Baffle Wall." In Formulas of Acoustics. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-76833-3_105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Acoustic baffles"

1

Eisinger, F. L., and R. E. Sullivan. "Suppression of Acoustic Waves in Steam Generator and Heat Exchanger Tube Banks." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33377.

Full text

Abstract:

Tube banks located in flow channels and exposed to crossflow have a low resistance to acoustic resonance and vibration in general. Such resistance can be increased substantially by placing acoustic baffles inside the tube banks. The locations and the number of baffles play an important role in the degree of their effectiveness of suppressing acoustic waves. One or two baffles placed within a tube bank will raise the threshold to acoustic vibration significantly. Optimum baffle locations suppressing acoustic resonance and vibration or reducing noise levels at resonance can be determined. A gene

APA, Harvard, Vancouver, ISO, and other styles

2

Goyder, H. G. D., and A. Hameed. "Experimental Investigation of Acoustic Modes in Baffled Heat Exchangers." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-32785.

Full text

Abstract:

The standard method for preventing a heat exchanger from generating a loud noise is to insert acoustic baffles which subdivide the vessel. It had previously been thought that such baffles would increase the acoustic natural frequency and thus prevent a resonance condition involving interactions between the sound field and wake oscillations behind tubes. Theoretical and experimental investigations, described in this paper, show that the effect of introducing an acoustic baffle into a shell is to decrease the acoustic natural frequency. This effect is not helpful and may result in resonant condi

APA, Harvard, Vancouver, ISO, and other styles

3

Matveev, Konstantin I. "A Model for Acoustic Instabilities Induced by Vortex Shedding in Ducts." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-41238.

Full text

Abstract:

Acoustic instabilities may develop in ducts with a mean flow due to vortex shedding. A reduced-order model for vortex-structure interaction is derived in this paper. A duct with two baffles is considered as a general configuration for developing this model. Formation of vortices at the upstream baffle is affected by acoustic oscillations. A new quasi-steady model is applied for determining a moment of vortex separation in an unsteady flow. A vortex impingement on the downstream baffle is assumed to occur instantaneously in order to utilize a ‘kicked’ oscillator model. If vortex collisions with

APA, Harvard, Vancouver, ISO, and other styles

4

Gupta, Anupam K., Yanqing Fu, Dane Webster, and Rolf Müller. "Bat Noseleaves as an Inspiration for Smart Emission Baffle Structures." In ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3120.

Full text

Abstract:

Baffle shapes are commonly used in engineered devices to interface sound sources with the free field. Examples are acoustic horns seen in megaphones and horn-loaded loudspeakers. Typical for these devices are simple, static shapes that serve primarily an impedance-matching function. Diffracting baffles linked to a sound source are also common in the biosonar system of bats. In particular in bat groups that emit their ultrasonic pulses nasally, the nostrils are always surrounded by some baffle shape. This is the case across several large and diverse bat families such as horseshoe bats (Rhinolop

APA, Harvard, Vancouver, ISO, and other styles

5

Müller, Rolf, Philip Caspers, Yanqing Fu, and Anupam K. Gupta. "Bioinspired Dynamic Sensing of Acoustic Waves." In ASME/JSME/KSME 2015 Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ajkfluids2015-4680.

Full text

Abstract:

Biosonar is one of the most capable active senses found in nature and in engineering. It enables certain bat species, such as the horseshoe bats (family Rhinolophidae) and the Old World leaf-nosed bats (family Hipposideridae) to navigate and pursue prey in dense natural environments. Bats from these families also stand out for the dynamics of their biosonar systems that is evident in shape-changing baffles that diffract the ultrasonic wave packets on emission as well as on reception. Some of the acoustic effects predicted for the dynamics in bats have been reproduced qualitatively with a simpl

APA, Harvard, Vancouver, ISO, and other styles

6

Fairbrother, Robert, and Eric Varhos. "Acoustic Simulation of an Automotive Muffler with Perforated Baffles and Pipes." In SAE 2007 Noise and Vibration Conference and Exhibition. SAE International, 2007. http://dx.doi.org/10.4271/2007-01-2206.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

McKee, Robert J., Joe Pantermuehl, Marlan Jarzombek, Ryan Gernentz, and Doug Haveman. "A Complex 3D Acoustic Induced Vibration of a Low NOx Refinery Boiler." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93959.

Full text

Abstract:

An increasing number of refinery and other large process steam boilers are being installed with or converted to low NOx combustion. The primary result of low NOx combustion is reduced emissions; however, this type of combustion can also lead to unsteady pressures (pulsation), rumbles, and vibrations of boiler components and walls. This paper reports on an investigation of vibrations that were observed on the walls of a new low NOx boiler during its commissioning. Dynamic measurements and 3D acoustic modeling were used to identify and define the fluid force (acoustic) induced vibration problem

APA, Harvard, Vancouver, ISO, and other styles

8

Chang, R. J., Bart Biche, and Achilles Chiotis. "Design and Acoustic Performance of Baffles Based on Programmed Heat-activated Foams." In Noise & Vibration Conference & Exposition. SAE International, 1999. http://dx.doi.org/10.4271/1999-01-1673.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Weber, Philip E., and Gregory W. Hopton. "Characterizing the In Vehicle Performance of Expandable Sealants Used As Acoustic Baffles." In Noise & Vibration Conference & Exposition. SAE International, 1999. http://dx.doi.org/10.4271/1999-01-1687.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

B, Prasanth, Sachin Wagh, and David Hudson. "Evaluation of Acoustic Performance of Expandable Foam Baffles and Correlation with Incab Noise." In SAE 2011 Noise and Vibration Conference and Exhibition. SAE International, 2011. http://dx.doi.org/10.4271/2011-01-1624.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Acoustic baffles"

1

Radlinski, Ronald P. Sonar Baffles. Presentation at the Wayne Reader Memorial Session of the 129th Meeting of the Acoustical Society of America, 31 May 1995, Washington, DC. Defense Technical Information Center, 1996. http://dx.doi.org/10.21236/ada315737.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!