Academic literature on the topic 'Active electronically scanned array'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Active electronically scanned array.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Active electronically scanned array"

1

Kobeleva, S. P., A. V. Perevezentsev, V. M. Fomin, and M. M. Frenkel. "CALCULATION OF ACTIVE ELECTRONICALLY SCANNED ANTENNA ARRAY BEAM PATTERN." Electronic engineering. Series 2. Semiconductor device 247, no. 4 (2017): 37–41. http://dx.doi.org/10.36845/2073-8250-2017-247-4-37-41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mathur, Manisha, Jaynendra Kumar Rai, and Nilakantan Sridhar. "Microwave photonic network for active electronically scanned array radar." International Journal of Microwave and Wireless Technologies 9, no. 3 (2016): 543–50. http://dx.doi.org/10.1017/s1759078716000295.

Full text
Abstract:
Active electronically scanned array (AESA) radar has large number oftransmit/Receive (T/R) modules which require multiple microwave and digital signals. Distribution of these signals through conventional method such as coaxial cable, twisted pair, etc. not only introduces engineering complexities and signal loss but also have limitation of bandwidth, data rate, transmission distance, etc. This paper addresses design and implementation of microwave photonic network for distribution of microwave and digital signals over single optical fiber using wavelength division multiplexing for AESA radars. The design challenge is to limit the variation in output radio frequency power within ±1 dB over full operational band of radar from 2 to 4 GHz and functionality under hostile military environment. Optical amplifiers have been used in all channels to stabilize optical output independent of wavelength with automatic light control. The optical signal is split into 64 identical parts to feed multiplexed signal into different digital receivers physically spread across the antenna array. It is an additional challenge to normalize performance as all 64 receivers show variation in output in spite of identical electronic circuitry. Experimental results validate the feasibility of microwave photonic network for wide branching distribution of multiple microwave and digital signals for AESA radar.
APA, Harvard, Vancouver, ISO, and other styles
3

Igor, Parkhomey, Boiko Juliy, Tsopa Nataliia, Zeniv Iryna, and Eromenko Oleksander. "Assessment of quality indicators of the automatic control system influence of accident interference." TELKOMNIKA Telecommunication, Computing, Electronics and Control 18, no. 4 (2020): 2070–79. https://doi.org/10.12928/TELKOMNIKA.v18i4.15601.

Full text
Abstract:
This work concentrates the analysis of the system of automatic control of the directive diagram of the moving active electronically scanned array with a limited number of transceiver modules. The analysis revealed a number of shortcomings that lead to a significant increase in standard deviations, quadratic integral estimates, and an increase in transient time. The identified disadvantages lead to a decrease in the efficiency of the antenna system, an increase in the error rate at the reception, the inability of the system to react to disturbances applied to any point of the system in the event of a mismatch of a given signal/noise level. In accordance with the analysis, the mathematical model of the automatic control system of the directional diagram of the moving active electronically scanned array was considered, considering this a new method of estimating the quality indicators of the automatic control diagram of the directional diagram of the active electronically scanned array in a random setting and disturbing action was developed. The difference between the proposed method and the existing method is in the construction of an automatic control system with differential coupling equivalent to the combination due to the introduction of derivatives of the random setting action of the open compensation connection.
APA, Harvard, Vancouver, ISO, and other styles
4

K.Lekshmi, Babu Saraswathi, and I. Jacob Raglend. "A Wideband Widebeam Tapered Slot Array Antenna for Active Electronically Scanned Array Antenna." International Journal on Communications 4 (2015): 10. http://dx.doi.org/10.14355/ijc.2015.04.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Park, Inho. "Efficient Beam Steering Calculator Design of Active Electronically Scanned Array(AESA)." Journal of Korean Institute of Information Technology 22, no. 10 (2024): 79–84. http://dx.doi.org/10.14801/jkiit.2024.22.10.79.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kumar, Raj, Pramendra Kumar Verma, and Machavaram Venkateshwar Kartikeyan. "Wide scanned electronically steered conformal active phased array antenna for Ku-band SATCOM." International Journal of Microwave and Wireless Technologies 11, no. 4 (2018): 376–81. http://dx.doi.org/10.1017/s1759078718001599.

Full text
Abstract:
AbstractThe paper describes the design and development of a low profile wide scanned conformal active 1 × 32 phased array antenna for Ku-band SATCOM applications. The realized antenna is diagonally polarized and covers full transmit frequency band (i.e. 13.75–14.5 GHz) of Ku band SATCOM. All the developed sub-systems of the antenna, i.e. conformal radiating array, conformal transmit module, manifold network, and beam steering unit are described. The VSWR of the antenna is better than 1.65 over the complete transmit frequency band. The antenna has the beam steering capability of ±60° in the array plane. Designed antenna is best suited for airborne applications, where antenna profile contributes considerable aero drag and RCS to the host platform.
APA, Harvard, Vancouver, ISO, and other styles
7

Slavyansky, Andrey, Eduard Zhdanov, Olga Kharina, and Alexander Shpak. "Structural implementation of a beamforming module for active phased array antennas." EPJ Web of Conferences 318 (2025): 03002. https://doi.org/10.1051/epjconf/202531803002.

Full text
Abstract:
The paper presents the results of research to determine the requirements for the construction of subarray elements of active electronically scanned array (AESA), as well as the results of their practical implementation. A radio engineering concept for constructing an AESA has been proposed, and the design of the AESA elements has been selected and justified. The results obtained are of great importance for the development of modern microelectronics technologies in the field of providing a highspeed radio communication channel with aircraft.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhdanov, E. R., A. O. Slavyanskiy, O. S. Kharina, and A. V. Shpack. "Designing an active electronically scanned array as part of onboard equipment of a high-speed radio communication channel." VESTNIK of Samara University. Aerospace and Mechanical Engineering 22, no. 4 (2023): 59–70. http://dx.doi.org/10.18287/2541-7533-2023-22-4-59-70.

Full text
Abstract:
The active electronically scanned array being developed is designed to provide an all-weather high-speed radio communication channel “Spacecraft – Earth”. It is supposed to provide fast, inertia-free observation of space by swinging the antenna beam electrically, and, in fact, is a dynamic space-time filter of the spacecraft. The aim of the work is to identify the basic principles of functioning of the array as part of the spacecraft with inherent limitations in the mass-dimensional and energy characteristics of the onboard equipment and, at the same time, high requirements for the functional characteristics. This paper presents the calculation and the main results of designing an active electronically scanned array complying with the requirements for optimizing the parameters of the antenna system. To assess the effect of scanning on the phase characteristics of the chips, a nonlinear amplifier model was developed. A statistical analysis of the phase characteristics was carried out when the load resistance changed in accordance with the obtained distribution laws. When calculating the resulting directional pattern of the antenna array, destabilizing factors were taken into account in accordance with the results of the study of the prototypes of the antenna array being created. Phase errors were calculated, mainly determined by the errors of the terminal parts of the receiving paths. Measures were implemented to ensure the effect of such phase errors on the directional pattern of the array only on the far side lobes.
APA, Harvard, Vancouver, ISO, and other styles
9

Lakshmaiah, Akumalla, N. N. S. S. R. K. Prasad, and K. P. Ray. "Investigations on Monolithic Radome Interactions with Active Electronically Scanned Array on Fighter Platform." Defence Science Journal 71, no. 5 (2021): 662–69. http://dx.doi.org/10.14429/dsj.71.16398.

Full text
Abstract:
The conventional fighter aircrafts are often equipped with fire control radar (FCR) using mechanically scanned antenna (MSA) with passive slots enclosed with monolithic conical radome. When the fighter platforms get upgraded with the modern active electronically steered array (AESA) FCR for better mission capabilities, even though radome change is desirable for optimum performance of AESA, it may not be feasible due to development time. This necessitate the evaluation of AESA radar with the existing monolithic radome. Hence active antenna aperture radiation pattern is required to be assessed with monolithic radome. To address this issue, simulation is preferred over physical testing, due to the reduced cost, time and complexity in measurements and ability to verify compatibility. In the present paper, the influence of monolithic radome on the active antenna radiation patterns are simulated and analysed. The characterisation studies helped for better optimisation of active aperture, optimum size for new radome development and additional space on fighter platforms that can be used for integration of new subsystems. Simulations are performed at two different locations of antenna inside radome. Experimental validations have been carried out to prove the efficacy of simulated results, which are in agreement.
APA, Harvard, Vancouver, ISO, and other styles
10

Han, Dan, Jin Huang, Jinzhu Zhou, et al. "Multi-Field-Coupled Model and Solution of Active Electronically Scanned Array Antenna Based on Model Reconstruction." International Journal of Antennas and Propagation 2018 (November 27, 2018): 1–12. http://dx.doi.org/10.1155/2018/3161928.

Full text
Abstract:
Active electronically scanned array antenna (AESA antenna) is capable of controlling the radiation pattern by controlling the feeding phase of the radiating elements. It has good performance and plays an important role in radar systems. With the development of AESA antenna towards high-frequency bands and high-density arrays, the structural-electromagnetic-thermal (SET) coupling becomes increasingly significant. It seriously restricts the realization of high performances of AESA antennas. However, the previously reported theoretical multi-field-coupled model for the coupling problem ignores the effect of the deformations of the feed system and array elements on the electrical performance. It only considers the positional deviations of the array elements in the coupling field. As a result, the accuracy of the numerical solution by the theoretical model is reduced. To overcome the above problems, this paper first establishes the field-circuit coupling model by introducing the deformation errors of the feed system into the existing theoretical model. Secondly, this paper proposes a new numerical solution for the multi-field-coupled problem of AESA antennas based on model reconstruction. And the model reconstruction includes the following: the NURBS (nonuniform rational B-spline) surface fitting algorithm that completes the mapping from finite element models to geometric models by the surface equations established by the node information and the local model reconstruction algorithm that determines the local geometric models by the positions and the directions. The NURBS surface fitting algorithm guarantees the accuracy of both the positions and shapes of array elements. The local model reconstruction algorithm ensures the accuracy of the amplitudes and phases of feed connectors. Finally, the numerical solution was applied to the 32-element AESA antenna and the simulations are close to the measurements.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Active electronically scanned array"

1

Abewardana, Wijenayake Chamith K. "Multi-dimensional Signal Processing And Circuits For Advanced Electronically Scanned Antenna Arrays." University of Akron / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=akron1415358304.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bangsgaard, Christian, Tobias Erlandsson, and Alexander Örning. "EXTREME PROCESSORS FOR EXTREME PROCESSING : STUDY OF MODERATELY PARALLEL PROCESSORS." Thesis, Halmstad University, School of Information Science, Computer and Electrical Engineering (IDE), 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-194.

Full text
Abstract:
<p>Future radars require more flexible and faster radar signal processing chain than commercial radars of today. This means that the demands on the processors in a radar signal system, and the desire to be able to compute larger amount of data in lesser time, is constantly increasing. This thesis focuses on commercial micro-processors of today that can be used for Active Electronically Scanned Array Antenna (AESA) based radar, their physical size, power consumption and performance must to be taken into consideration. The evaluation is based on theoretical comparisons among some of the latest processors provided by PACT, PicoChip, Intrinsity, Clearspeed and IBM. The project also includes a benchmark made on PowerPC G5 from IBM, which shows the calculation time for different Fast Fourier Transforms (FFTs). The benchmark on the PowerPC G5 shows that it is up to 5 times faster than its predecessor PowerPC G4 when it comes to calculate FFTs, but it only consumes twice the power. This is due to the fact that PowerPC G5 has a double word length and almost twice the frequency. Even if this seems as a good result, all the PowerPC´s that are needed to reach the performance for an AESA radar chain would consume too much power. The thesis ends up with a discussion about the traditional architectures and the new multi-core architectures. The future belongs with almost certainty to some kind of multicore processor concept, because of its higher performance per watt. But the traditional single core processor is probably the best choice for more moderate-performance systems of today, if you as developer looking for a traditional way of programing processors.</p>
APA, Harvard, Vancouver, ISO, and other styles
3

Pulipati, Sravan Kumar. "Electronically-Scanned Wideband Digital Aperture Antenna Arrays using Multi-Dimensional Space-Time Circuit-Network Resonance." University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1499440141479455.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chu, Ching-Yun, and 儲青雲. "A Scalable Ka-Band Active Electronically Scanned Array." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/7kt3e9.

Full text
Abstract:
博士<br>國立交通大學<br>電子研究所<br>107<br>This thesis analyzes the scaling properties of a generic phased array with different elementary error types, and presents a scalable hybrid phased-array system through the synchronization, analog complex-weighting and digital beamforming of numerous fully integrated Ka-band 4RX/4TX phased array transceiver ICs. A 1.09 GHz and a 50 MHz clock trees synchronize all array elements for their analog and sampling/digital part respectively. A global event trigger further synchronizes transmitting pulses and receiver sampling period for pulse-mode operations. Phase shifting is accomplished first in analog domain using optimal IF/LO complex weighting and signal summing in the 4RX/4TX IC to reduce the number of signals by a factor of four, followed by analog-to-digital sampling and the digital beamformer in FPGA and CPU. Phase shifting properties, programmable gain variations, and antenna pattern of each RTX channel are measured and tabulated to calculate optimal channel weights. Long-term phase stability is enhanced through temperature control by real-time monitoring all ICs’ temperature and adaptively adjusting the duty-cycle of the transmit mode of each IC to limit instantaneous temperature variations to ±0.5°C over each calibration session. This reduces random phase errors from 13.3° to 4.8° in TX mode. Reliable and repeatable pattern can be formed with less than 3.89% in maximum errors to main power ratio between theoretic prediction based on elementary properties and measurement results in both receive- and transmit- mode. Locating each Vivaldi antenna on a 2-D rectangular grid, an 8 x 4 subarray module with synchronized digital output is demonstrated.
APA, Harvard, Vancouver, ISO, and other styles
5

Stamm, James Matthew. "Analytical and numerical optimization of an electronically scanned circular array." 2000. http://etda.libraries.psu.edu/theses/approved/WorldWideIndex/ETD-43/index.html.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tanner, Alan Burnett. "Aperture synthesis for passive microwave remote sensing: The electronically scanned thinned array radiometer." 1990. https://scholarworks.umass.edu/dissertations/AAI9022749.

Full text
Abstract:
Aperture synthesis is applied to passive microwave remote sensing of the earth in an effort to attain high resolution images at low microwave frequencies. An L-band (1.4 GHz) synthetic aperture radiometer, dubbed the Electronically Scanned Thinned Array Radiometer, is tested and calibrated. The instrument is modeled after radio telescopes, and utilizes a thinned array of correlation interferometers to measure the Fourier Transform of the Brightness temperature image. The antenna hardware of such an array is reduced by comparison with real aperture antenna systems, which renders this technique relevant to future spaceborne remote sensing applications that require high resolution. In particular, it is the scientific applications at L-band, including the spaceborne remote sensing of soil moisture and ocean salinity, which have motivated this research. Aperture synthesis concepts are developed and applied to the theoretical ESTAR system in chapter II. Chapter II also includes a description of the prototype which was designed constructed at the University of Massachusetts. Practical calibration algorithms are developed in chapter III, and the synthesis technique is refined in chapter IV to reduce side lobes. Chapter V presents the first known images by this class of remote sensing radiometer, and the concluding chapter suggests avenues for future research.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Active electronically scanned array"

1

Dana, Roger A. Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

A, Chren William, and Goddard Space Flight Center, eds. Controller for the electronically scanned thinned array radiometer (ESTAR) instrument. National Aeronautics and Space Administration, Goddard Space Flight Center, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

A, Chren William, and Goddard Space Flight Center, eds. Controller for the electronically scanned thinned array radiometer (ESTAR) instrument. National Aeronautics and Space Administration, Goddard Space Flight Center, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chren, William A. Phase aligner for the Electronically Scanned Thinned Array Radiometer (ESTAR) instrument. National Aeronautics and Space Administration, Goddard Space Flight Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Robinson, A. P. An electronically-steerable active receiving array for h.f.. BBC, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., ed. Output data formatter for the Electronically Scanned Thinned Array Radiometer (ESTAR) instrument. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., ed. Walsh function generator for the electronically scanned thinned array radiometer (ESTAR) instrument. National Aeronautics and Space Administration, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Center, Langley Research, ed. A conceptual thermal design study of an electronically scanned thinned array radiometer. National Aeronautics and Space Administration, Langley Research Center, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., ed. Walsh function generator for the electronically scanned thinned array radiometer (ESTAR) instrument. National Aeronautics and Space Administration, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Swift, C. T. ESTAR--the Electronically Scanned Thinned Array Radiometer for remote sensing measurement of soil moisture and ocean salinity. National Aeronautics and Space Administration, Goddard Space Flight Center, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Active electronically scanned array"

1

Dana, Roger A. "Examples of the Use of Monopulse Measurements in Radar Target Tracking with Kalman Filters." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dana, Roger A. "Ideal One-Way Monopulse Performance." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dana, Roger A. "Fidelity and Accuracy of Monopulse Measurement Simulation." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dana, Roger A. "One-Way Monopulse Performance in the Real World." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dana, Roger A. "Two-Way (Monostatic Radar) Monopulse Performance." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dana, Roger A. "Other Real-World Effects on Radar Detection Range." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dana, Roger A. "Sidelobe Control in Monopulse and Design Implications." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dana, Roger A. "Signal-to-Noise Ratios, the Relationship Between Signals-in-Space and Received Voltages, and AESA Gain." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dana, Roger A. "Introduction." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dana, Roger A. "Theory of Phase- and Amplitude-Comparison Monopulse." In Monopulse Measurement with Active Electronically Scanned Arrays (AESAs). Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91908-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Active electronically scanned array"

1

Duhamel, Pierre-Emile, Haixiao Yue, Jeffrey Okurowski, and Dan Pritsker. "Embedded RDMA Lite for FPGA Interconnect in Active Electronically Scanned Array RADAR." In 2024 IEEE International Symposium on Phased Array Systems and Technology (ARRAY). IEEE, 2024. https://doi.org/10.1109/array58370.2024.10880323.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Yu-Hsiang, Chu-Yu Chen, Chiung-Lin Tsai, Hao-Zhu Zhuang, and Chien-Hung Chen. "Enhancing Small Drone Detection with Active Electronically Scanned Array Radar." In 2024 International Symposium on Intelligent Signal Processing and Communication Systems (ISPACS). IEEE, 2024. https://doi.org/10.1109/ispacs62486.2024.10868678.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Leon, Yaret, Gökhan Gültepe, Qian Ma, et al. "A Scalable 0.5-6 GHz $4\mathrm{x}4$ True Time Delay (TTD) Active Electronically Scanned Transmitter/Receiver Tile and Array." In 2024 IEEE International Symposium on Phased Array Systems and Technology (ARRAY). IEEE, 2024. https://doi.org/10.1109/array58370.2024.10880352.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nguyen-Duy, Khuyen, Thuan Pham-Minh, Tien Le-Ngoc, and Truong Le-Huu. "Design of a Cavity Backed Patch Antenna Array for Active Electronically Scanned Array Radar With Wide-Angle Impedance Matching." In 2024 Tenth International Conference on Communications and Electronics (ICCE). IEEE, 2024. http://dx.doi.org/10.1109/icce62051.2024.10634727.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Das, Sanghamitro, Satish K. Sharma, Nhat Truong, Jia-Chi S. Chieh, and Raif Farkouh. "A Single-Layer Dual-Circularly Polarized Microstrip Patch Antenna for Flat-Panel Wideband Active Electronically-Scanned Phased Array Applications." In 2024 IEEE INC-USNC-URSI Radio Science Meeting (Joint with AP-S Symposium). IEEE, 2024. http://dx.doi.org/10.23919/inc-usnc-ursi61303.2024.10632396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Holzman, Eric L. "On Removing Circulator and Isolators from Active Electronic Scanned Array Front Ends." In 2024 IEEE International Symposium on Phased Array Systems and Technology (ARRAY). IEEE, 2024. https://doi.org/10.1109/array58370.2024.10880381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Khang, Gwon Gu, Ho-Jun Yang, Yuri Lee, Jongpil Kim, Seong Ju Kim, and Jong Min Park. "Design Results of a Wideband Active Electrically Scanned Array(AESA) Antenna for X-band Satellite Synthetic Aperture Radar(SAR) Application." In 2024 International Symposium on Antennas and Propagation (ISAP). IEEE, 2024. https://doi.org/10.1109/isap62502.2024.10846658.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sadowy, Gregory, Kyle Brown, Neil Chamberlain, et al. "UAVSAR Active Electronically-Scanned Array." In 2010 IEEE International Symposium on Phased Array Systems and Technology (ARRAY 2010). IEEE, 2010. http://dx.doi.org/10.1109/array.2010.5613278.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lyon, R. W., A. M. Kinghorn, G. D. Morrison, A. Stonehouse, G. Byrne, and M. Dugan. "Active electronically scanned tiled array antenna." In 2013 IEEE International Symposium on Phased Array Systems and Technology (ARRAY 2013). IEEE, 2013. http://dx.doi.org/10.1109/array.2013.6731819.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Brookner, Eli. "Active electronically scanned array (AESA) system noise temperature." In 2013 IEEE International Symposium on Phased Array Systems and Technology (ARRAY 2013). IEEE, 2013. http://dx.doi.org/10.1109/array.2013.6731925.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Active electronically scanned array"

1

Owens, Donna, and H. Schuman. Demonstration of an Active Electronically Scanned Array on a Conic Surface. Defense Technical Information Center, 1993. http://dx.doi.org/10.21236/ada344607.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Duffy, Sean M., Francis Willwerth, Larry Retherford, and Jeffrey S. Herd. Results of X-Band Electronically Scanned Array Using an Overlapped Subarray Architecture. Defense Technical Information Center, 2010. http://dx.doi.org/10.21236/ada533048.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography