Academic literature on the topic 'Adderare'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Adderare.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Adderare"
1
&NA;. "Adderall." Reactions Weekly &NA;, no. 1204 (2008): 5. http://dx.doi.org/10.2165/00128415-200812040-00014.
Full text
2
&NA;. "Adderall." Reactions Weekly &NA;, no. 1077 (2005): 6. http://dx.doi.org/10.2165/00128415-200510770-00017.
Full text
3
Vanga, Rohini R., Bikram Bal, and Kevin W. Olden. "Adderall Induced Acute Liver Injury: A Rare Case and Review of the Literature." Case Reports in Gastrointestinal Medicine 2013 (2013): 1–3. http://dx.doi.org/10.1155/2013/902892.
Full textAbstract:
Adderall (dextroamphetamine/amphetamine) is a widely prescribed medicine for the treatment of attention-deficit/hyperactivity disorder (ADHD) and is considered safe with due precautions. Use of prescribed Adderall without intention to overdose as a cause of acute liver injury is extremely rare, and to our knowledge no cases have been reported in the English literature. Amphetamine is an ingredient of recreational drugs such as Ecstacy and is known to cause hepatotoxicity. We describe here the case of a 55-year-old woman who developed acute liver failure during the treatment of ADHD with Adderall. She presented to the emergency room with worsening abdominal pain, malaise, and jaundice requiring hospitalization. She had a past history of partial hepatic resection secondary to metastasis from colon cancer which was under remission at the time of presentation. She recovered after intensive monitoring and conservative management. Adderall should be used carefully in individuals with underlying liver conditions.
4
Stowe, Cindy D., Stephanie F. Gardner, Charles C. Gist, Eldon G. Schulz, and Thomas G. Wells. "24-Hour Ambulatory Blood Pressure Monitoring in Male Children Receiving Stimulant Therapy." Annals of Pharmacotherapy 36, no. 7-8 (2002): 1142–49. http://dx.doi.org/10.1345/aph.1a367.
Full textAbstract:
OBJECTIVE: To determine whether cardiac indices are altered as assessed by 24-hour ambulatory blood pressure monitoring (ABPM) in male children receiving either chronic methylphenidate or dextroamphetamine/levoamphetamine (Adderall) therapy. METHODS: Boys 7–11 years old who were receiving methylphenidate or Adderall for a minimum of 2 months were asked to participate. Subjects wore ambulatory blood pressure monitors for 24-hour periods both off and on stimulant therapy. RESULTS: Subjects (n = 17; 8 methylphenidate, 9 Adderall) were well matched. Systolic blood pressure (SBP), diastolic blood pressure (DBP), and heart rate differed between off and on stimulant therapy (p < 0.05). DBP load calculated from ABPM reference data was increased significantly (9.0% ± 5.6% on and 4.8% ± 4.5% off therapy; p < 0.05) while subjects were taking Adderall. There was a trend toward a greater elevation in blood pressure load during awake hours and a more pronounced decrease during the asleep hours for periods on compared with off-stimulant therapy. This trend resulted in significant (p < 0.05) nocturnal dipping on-stimulant phases compared with off-stimulant therapy for both SBP and DBP (Adderall) and SBP (methylphenidate). Two subjects (1 Adderall, 1 methylphenidate) met the criteria to be considered hypertensive based both on mean awake and 24-hour blood pressure load assessments during their on-treatment period. One additional subject receiving Adderall therapy met the criteria to be considered hypertensive based on blood pressure load criteria while off therapy only. Positive correlation coefficients (p < 0.05) were found when comparing stimulant dose (mg/kg) with the percent change of mean SBP, DBP, and heart rate between off and on therapy (r = 0.56, 0.61, and 0.58, respectively). CONCLUSIONS: These preliminary data suggest that blood pressure and heart rate appear to be altered in male patients while receiving stimulant therapy for attention-deficit hyperactivity disorder. Blood pressure and heart rate screening and monitoring during stimulant therapy to determine whether alterations become clinically significant is encouraged.
5
&NA;. "Adderall interaction." Reactions Weekly &NA;, no. 1174 (2007): 4. http://dx.doi.org/10.2165/00128415-200711740-00012.
Full text
6
&NA;. "Adderall/methylphenidate." Reactions Weekly &NA;, no. 1177 (2007): 5. http://dx.doi.org/10.2165/00128415-200711770-00008.
Full text
7
Thomas, Stephanie, and Himanshu Upadhyaya. "ADDERALL AND SEIZURES." Journal of the American Academy of Child & Adolescent Psychiatry 41, no. 4 (2002): 365. http://dx.doi.org/10.1097/00004583-200204000-00005.
Full text
8
Rose, Sherrill, Kristi S. Borowski, Wendy M. White, Matthew Hathcock, and Enid Rivera-Chiauzzi. "Adderall and Pregnancy." Obstetrics & Gynecology 131 (May 2018): 39S—40S. http://dx.doi.org/10.1097/01.aog.0000532976.17300.b9.
Full text
9
Sikes, Carolyn, Jeffrey G. Stark, Russ McMahen, and Dorothy Engelking. "A Single-Dose, Two-Way Crossover, Open-Label Bioequivalence Study of an Amphetamine Extended-Release Oral Suspension in Healthy Adults." Journal of Attention Disorders 24, no. 3 (2017): 414–19. http://dx.doi.org/10.1177/1087054717743329.
Full textAbstract:
Objective: The purpose of this study was to compare the pharmacokinetics of a new extended-release amphetamine oral suspension (AMP XR-OS) with a standard extended-release mixed amphetamine salts product, Adderall XR®. Method: In this single-dose, open-label, randomized, two-period, two-treatment crossover study, 42 healthy adult volunteers received 15 mL of AMP XR-OS in one period and a 30 mg Adderall XR capsule in another period (both containing 18.8 mg of amphetamine base) under fasted conditions. Blood samples were analyzed for d- and l-amphetamine concentrations, and pharmacokinetic parameters Cmax, AUC0-5, AUC5-last, and AUCinf were calculated to determine bioequivalence. Safety was monitored throughout the study. Results: The 90% confidence intervals (CIs) for the log-transformed Cmax, AUC0-5, AUC5-last, and AUCinf fell within the accepted 80% to 125% range for establishing bioequivalence for d- and l-amphetamine. The most common adverse events were nausea and decreased appetite. Conclusion: AMP XR-OS is bioequivalent to Adderall XR in healthy adult participants.
10
MCGOUGH, JAMES J., JOSEPH BIEDERMAN, LAURENCE L. GREENHILL, et al. "Pharmacokinetics of SLI381 (ADDERALL XR), an Extended-Release Formulation of Adderall." Journal of the American Academy of Child & Adolescent Psychiatry 42, no. 6 (2003): 684–91. http://dx.doi.org/10.1097/01.chi.0000046850.56865.cb.
Full textDissertations / Theses on the topic "Adderare"
1
Dahlqvist, Michael, and Andreas Röst. "Modulgenerator för generering av Brent Kung-adderare." Thesis, Linköping University, Department of Electrical Engineering, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-1834.
Full textAbstract:
<p>För att snabba upp addering av tal, vilket är en vital del inom signalbehandling finns olika algoritmer. En sådan algoritm är Brent Kungs vilken har en tidsfördröjning proportionell mot log2(N). </p><p>I rapporten jämförs några olika varianter av adderare med avseende på grinddjup, vilket är proportionelltmot propageringstiden. En modulgenerator för Brent Kung-adderare implementeras med Skill-kod i Cadence. Modulgeneratorn kan genera adderare av obegränsad ordlängd och är även teknologi oberoende. Brent Kung-adderarens fysiska begränsningar studeras och förslag ges på lämpliga förbättringar.</p><br><p>To speed up the addition of numbers, which is a vital part of signal processing there are different types of algorithms. One of those algorithms is the Brent Kung-adder, which has a time delay proportional to log2(N). </p><p>In the report comparison of different adders has been done, taking into account grind-depth which is proportional to the propagation time. A module generator for the Brent Kung adder is implemented with skill-code in the program Cadence. The module generator can generate adders of infinite word length and is independent of the technology used. The physical limitations of Brent Kung adders are being studied and proposals for improvements are given in the report.</p>
2
Qviström, Johan. "Adderade råmaterial för produktion av biokol." Thesis, KTH, Skolan för kemi, bioteknologi och hälsa (CBH), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-251455.
Full textAbstract:
Denna rapport undersöker ett antal biomassors lämplighet att användas vid tillverkning av biokolgenom långsam pyrolys. Detta har genomförts med hjälp av en litteraturstudie inklusive fallstudierför alla undersökta biomassor och det resulterade i två modeller. En för karaktärisering av biokoletskemiska och fysiska egenskaper vid varierande pyrolystemperatur. Den andra modellen beskriver ivilken utsträckning systemets energibehov är självförsörjande. Detta genom att undersöka reaktornsenergibehov vid olika temperaturer och uppehållstider i förhållandet till den energimängd som finnstillgänglig i pyrolysgasen. De biomassor som i första hand undersökts är fiberslam, ligninpellets,olivavfall, solrosskal och kaffesump. Utöver dessa har även cashewnötsskal, kokosnötskal, risskal ochmandelskal inkluderats för att bedöma deras lämplighet att användas av Stockholm Exergi.Litteraturstudien visade att det finns många parametrar hos både processen och biomassan sompåverkar kvaliteten på biokolet, fördelning av produkter och systemnyttor. Att kvantifiera inverkanav alla parametrar visade sig svårt på grund av brist på data, varför endast effekten avpyrolystemperaturen kunde modelleras. Modell 1 visar att biokol från nötskal generellt sett är avhögre kvalitet än de från till exempel kärnor, olika typer av halm och biomassor med hög fukt ochaskhalt. De flesta nötskal är enligt fallstudierna mer lämpade för processer med fokus på bioolja somhuvudsaklig produkt. Modell 2 visade att mandelskal och olivkärnor bör ge en energimässigtsjälvförsörjande process vid temperaturer över 400 °C.<br>This report investigates the feasibility of several types of biomass to be used as feedstock forproduction of biochar by slow pyrolysis. A literature review and case studies for all investigatedfeedstocks resulted in two models: one for the characterization of physical and chemical propertiesof biochar at different high treatment temperatures, and the other for determining to what degreethe system will be thermally self-sustaining, if at all. This by determining the energy required by thereactor in comparison to the energy available in the pyrolysis gas. The primary investigatedfeedstocks were: fibre sludge, lignin pellets, olive wastes, sunflower seeds and exhausted coffeeresidue. Additionally, cashew nut shells, coconut shells, rice husks and almond shells were alsoinvestigated to determine their suitability for future use by Stockholm Exergi. The literature reviewshowed that there are various process parameters or parameters within the composition of thefeedstock that effects both the quality of the produced biochar, product distributions, and benefitswithin the system. To quantify the effect of all the parameters proved difficult due to the lack ofdata. However, enough data regarding the effects of the treatment temperature was collected andcould be used for modelling. Model 1 showed that biochar produced from nutshells generallyproduced biochar of higher quality than biochar made from kernels, different types of straw andfeedstocks with high content of water and ash. Most nutshells would, according to the conductedcase study, be more suited for processes where the primary objective is production of bio-oil. Model2 showed that almond shells and olive kernels should generate a thermally self-sustaining process attemperatures above 400 °C.
3
Mörrby, Johan, and Patrik Partin. "Adderande tillverkning för metall." Thesis, KTH, Industriell produktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-159475.
Full textAbstract:
The Swedish automotive industry has since way back been struggling with bankruptcy, abroad buy outs and staff cuts. Competition and pressure on prices are two factors that affect the automotive industry. Because of this, the companies are pressured to continuously developing their work in addition to be able to compete on the market. The aircraft industry has successfully managed to implement additive manufacturing (AM) and for motorsport has several components manufactured with AM been used. When AM is used as a manufacturing method, there are a number of advantagesthat follows. One of the greatest advantages is the resource efficient manufacturing, with aspect to material efficiency, shortened developing time and a less complex design. But, regardless of these, AM is still standing in front of some challenges to further replace the traditional manufacturing methods and gain a larger market share. Herein we will investigate which the greatest opportunities that follow AM are. But also we will investigate which limitations that prevent a further use of AM. By analyzing earlier studies, using theory about operations management and studying empiricism from suitable companies. Our study indicates that opportunities and limitations do not only occur on a technical level but also at an operational level. The opportunities that follow with AM enable a larger market for minor automotive manufacturers. But some major limitations still prevent a further use of AM are the productivity, the investment cost and the lack of knowledge about AM.<br>Den svenska fordonsindustrin har sedan flera år präglats av konkurser, utländska uppköp och nedskärningar. Konkurrensen och prispressen inom denna industri är väldigt stor. Detta ställer stora krav på tillverkarna att ständigt utveckla sin verksamhet. Inom flygplansindustrin har adderande tillverkning (AM) lyckosamt implementerats och inom motorsporten har flertalet AM-framställda motorkomponenter använts. Med AM finns det flera fördelar, en av de största är resurseffektiv produktion, detta med avseende på flera aspekter, som effektiv materialhantering, förkortade ledtider och enklare konstruktion. Tekniken har haft starkt uppsving och utvecklats starkt de senaste åren och fungerar idag väl för tillverkning av funktionella komponenter. Men fortfarande står AM inför stora utmaningar för att kunna ersätta de traditionella tillverkningsmetoderna och utöka sina marknadsandelar. Syftet med rapporten är att undersöka vilka de största möjligheterna är vid en användning av AM. Men vi kommer även att studera vilka begränsningar som finns vid ytterligare användning av AM. Genom att använda tidigare studier, teorier om verksamhetsledning och studera relevanta företag empiriskt, indikerar vårt arbete på att möjligheterna och begränsningar inte endast uppstår på en teknisk nivå, utan även på en organisatorisk nivå. Möjligheterna som följer med AM möjliggör enstörre marknad för de mindre fordonstillverkarna. Men några större begränsningar förhindrar fortfarande en bredare användning av AM; produktiviteten, investeringskostnaden och den bristande kunskapen om AM.
4
Endmyhr, Larsson William, and Tomas Nyman. "Empatisk och icke-empatisk filmmusik, tonalitetens adderade värde." Thesis, Högskolan i Skövde, Institutionen för informationsteknologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-17096.
Full textAbstract:
Detta examensarbete undersöker hur olika sorters tonalitet påverkar upplevelsen av filmmusik i en animerad filmscen utifrån begreppen adderat värde, empatisk och icke-empatisk musik. Som teoretisk bakgrund för sambandet mellan det visuella och auditiva ligger de begrepp och definitioner som Chion, Cohen och Davies tagit fram. För att förtydliga skillnaderna mellan olika sorters tonalitet tar undersökningen och skapandet av dess artefakt stöd i definitioner från Persichetti, Simms, Perle, Hauer och Schönberg. Artefakten består av två versioner av en scen ur en animerad film där en version har tonal musik och den andra atonal musik. Tio respondenter gav svar på intervjufrågor vilka sedan analyserades för att producera resultat som besvarar frågeställningen. Undersökningen visar på att tonalitet har en inverkan på hur filmmusik uppfattas och olika sorters tonalitet kan ge upphov till både liknande men också helt skilda känslor. I slutsatsen förs en diskussion om att det vore till undersökningens fördel om fler och längre filmklipp användes med mer genomarbetat musik vilka visades för fler respondenter då svaren från de tio respondenterna i denna undersökning endast ger en liten bild av tonalitetens inflytande och betydelse.
5
Norgren, Eli. "Adderande tillverkning avarmproteser i låginkomstländer." Thesis, KTH, Industriell produktion, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172552.
Full textAbstract:
Sammanfattning Studiens syfte var att undersöka armproteser i låginkomstländer som tillämpningsområde för adderande tillverkningsteknik. Studien inleddes med en genomgång av befintlig litteratur inom ämnesområdena adderande tillverkning, protestillverkning,social hållbar-‐ het och resurseffektivisering. Informationen från tidigare forskning kompletterades därefter med intervjuer. Informanterna hade bakgrund inom adderande tillverknings-‐ teknik, ortopedi och protestillverkning. Teori och empiriskt underlag analyserades utifrån behovsbilden. Den typ av protes som är bäst lämpad att tillverka med adderande tillverkning är en enkel modell av kroppsdriven mekanisk armprotes. Adderande tillverkningstekniker som använder exempelvis fotopolymerer som material lämpar sig inte för protestillverkning eftersom materialet är känsligt för UV-‐strålning. Delar av protesen som inte är i direkt kontakt med patientens kropp behöver inte ha en hög ytjämnhet utan de viktigaste parametrarna är tålighet och hållfasthet. Metoden behöver även vara resurseffektiv med hänsyn till bland annat tid, materialåtgång och kostnad. Slutsatsen blev att FDM troligen kan vara en lämplig metod för protestillverkning förutsatt att en adekvat konstruktion utformas.<br>Abstract The aim of this study was to investigate arm prosthetics in low-income countries as an area of application for additive manufacturing. The study began with a literature review on the subjects of additive manufacturing, manufacturing of prostheses, social sustainability and resource efficiency. The information from previous research was supplemented with interviews. The informants had backgrounds in additive manufacturing, orthopedics and prosthetics manufacturing. The type of prosthesis which is best suited for additive manufacturing is some version of a simple body--‐powered mechanical prosthesis. Additive manufacturing methods using photopolymers are not suited for manufacturing of prosthesis since the material is sensitive to UV. The parts of the prosthesis that are not in direct contact with the patient's body do not require a high degree of surface smoothness, the most important parameters are durability and strength. Furthermore the method needs to be resource--‐efficient with respect to, among other things, time, material consumption and cost. The conclusion was that FDM is likely to be a suitable method for prosthetics manufacturing.
6
Hjalmarsson, Eric. "Sharpekvoten som prestationsmått; Inkluderandet av avkastningsdistributionens skevhet : Adderar det informationsvärde för investeraren?" Thesis, Karlstads universitet, Handelshögskolan, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-38886.
Full textAbstract:
Sharpekvoten är ett av de mest frekvent använda prestationsmåtten för fonder. Kvoten beskriver en fonds riskjusterade avkastning genom att dividera dess överavkastning med dess standardavvikelse. Måttet har emellertid fått kritik på flera områden och visat sig vara missvisande under vissa scenarion, något som även denna studie påvisar. Studien bygger på en kvantitativ metod där ett stickprov används för att beskriva den studerade populationen; Sverigefonder. Studiens resultat visar att Sverigefonders avkastning inte är normaldistribuerad, något som är ett grundantagande vid Sharpekvots-beräkningen då fondens standardavvikelse används. Resultaten visar att samtliga observationers avkastningsdistribution antingen är positiv eller negativs skev, vilket leder till att standardavvikelsen konsekvent över- eller underskattar tillgångens risk. Tidigare studier betonar att även avkastningsdistributionens skevhet har betydelse vid investeringar. Denna aspekt återspeglas dock inte i den traditionella Sharpekvoten och författaren presenterar därför en egen modifikation av måttet där avkastningsdistributionens skevhet adderas. Studiens resultat bör tolkas ur ett behavior-finance-perspektiv, där människor antas ha olika tidshorisont för investeringar, inte antas agera rationellt, samt påverkas känslomässigt av marknadshändelser. Med det som utgångspunkt adderar avkastningsdistributionens skevhet värdefull information för investeraren, bortom fondens medelavkastning och standardavvikelse som enligt modern portföljteori är de enda två aspekterna en investerare har preferenser om. En ytterligare aspekt som påvisas i studien är att det tycks finnas en osund informationsassymetri mellan spararna och fondkommissionerna, samt strukturella incitament för att behålla denna. Detta kan ses som en förklaringsgrund till det minskade förtroendet som växt fram för de aktivt förvaltade fonderna. Författaren föreslår ökad transparens från fondkommissionernas sida och ser en presentation av en skevhetsjusterad Sharpekvot som ett steg på vägen. Studien bidrar till tidigare forskning genom att empiriskt påvisa fördelen med en modifikation av Sharpekvoten som adderar informationsvärde för investerarna.<br>The Sharpe ratio is one of the most frequently used performance measures for funds. The ratio is describing a fund’s risk adjusted return by dividing its excess return by its standard deviation. The measure has been subject to critique in several areas and has shown to be misleading under certain scenarios, something that this study also indicates. The study is conducted based on a quantitative method where a sample is used to describe the target population; Sverigefonder. The results of the study shows that Sverigefonders return is not normally distributed, something that is elementary assumed when calculating the Sharpe ratio by the usage of the standard deviation. The results show that all the observations’ return distribution either is positively or negatively skewed. The implication of that is that the standard deviation consistently either over- or under estimates the asset’s risk. Previous studies emphasize that the skewness of the return distribution is of importance as well when investing. This aspect is not reflected though in the traditional Sharpe ratio and the author is therefor presenting an own modification of the performance measure where the skewness is added to the ratio. The results of the study should be interpreted from a behavior finance perspective, where investors are assumed to have different time horizons for investing, act irrational, and reacting emotionally to market events. With those aspects as the premise, the skewness of the return distribution is adding valuable information for the investor, beyond the fund’s average return and standard deviation, which are the only two aspects that the investor has a preference regarding according to modern portfolio theory. One additional aspect that is shown in the study is that there seems to exist an unhealthy information asymmetry between the investors and the fund commissions, and structural incentives to keep it. This can be seen as a suggestion of explanation to the lowered trust for the actively managed funds. The author is proposing enhanced transparency for the fund commissions and sees the presenting of a skewness-adjusted Sharpe ratio as a step in that direction. This study is contributing to previous research by empirically showing the advantage off presenting a modification of the Sharpe ratio, which adds additional information to the investors.
7
Tiberg, Linnéa. "Addera mervärde till plan- och byggprocessen med Nature-based solutions." Thesis, Högskolan i Halmstad, Akademin för företagande, innovation och hållbarhet, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-45524.
Full textAbstract:
With a growing density in the cities, we are building more and more compact with fewer space for green areas. At the same time, the biodiversity has been going through extensive changes due to humans’ impact on the planet. Nature-based solutions (NbS) is one of the important tools to cope with climate change and other important challenges of the community. The aim of this study is to create a deeper understanding of what possibilities and limitations there is for Nature-based solution for the Swedish circumstances. This is a qualitative study based upon a literature study and interviews, that unravels what NbS implies, what the project process looks like and how it overlaps with the plan and building law in Sweden. The study shows how to implement NbS to the plan and building process, there are many possibilities to implement but few means to control the outcome through the process. Today the sustainability work is mostly built on minimum requirements, society impacts and on good will. To better implement NbS the study shows that though the environmental impact assessment the work is the most equivalent compared to NbS project process and also has the authority to regulate different protection measures.
8
Möller, Josefine, and Linda Dürholt. "Addera värde inom mäklarbranschen : En studie om mäklares arbete med homestyling." Thesis, Linnéuniversitetet, Institutionen för marknadsföring (MF), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-54072.
Full textAbstract:
Course/Level: 2FE23E, Bachelor DegreeAuthors: Linda Dürholt & Josefine MöllerSupervisor: Dan HalvarssonExaminer: Bertil HulténTitle: Add value within the trade of brokers – A studie about the brokers work with homestyling in their broker serviceKeywords: add value, services, experiences, brokers, homestylingBackground: The broker profession is included in the servicesector where the broker acts as a middleman between buyer and seller and their task is to add value to a real estate deal. If the broker lacks knowledge within a surtain field, he or she should refer to another person with this competence. Services that lays beyond the brokers ordinary work and competence, are often requested and therefore brokers use supplementary services. Homestyling is one of these supplementary services that is implemented since it can generate increased value.Research question: How does homestyling add value to the brokers service?Purpose: The purpose with this studie is to describe and analyse brokers work with homestyling in their service.Method: The qualitative studie was executed by single interviews with four different broker companies. The interviews were of a semi-structured form.Conclusion: Brokers have identified a way of creating value to their service by offering designed packages where the core service is combined with a number of supplementary services, where homestyling is one of them. How present the phenomenon has been over time within the different broker companies differ but all of them are today working with homestyling in a high extent.<br>Kurs/nivå: 2FE23E, KandidatuppsatsFörfattare: Linda Dürholt & Josefine MöllerHandledare: Dan HalvarssonExaminator: Bertil HulténTitel: Addera värde inom mäklarbranschen - En studie om mäklares arbete med homestyling i sin mäklartjänstNyckelord: värdeaddering, tjänster, upplevelser, mäklarbranschen, homestylingBakgrund: Mäklaryrket ingår i tjänstesektorn där mäklaren i fråga agerar mellanhand mellan köpare och säljare och har till uppgift att addera värde vid en bostadsaffär. Saknar fastighetsmäklaren kunskap inom ett visst område, bör denna hänvisa till någon som erhåller kompetensen. Ofta efterfrågas tjänster som ligger utanför mäklaruppdraget och mäklarens kompetens och därför använder mäklare tilläggstjänster som komplement. Homestyling är en tilläggstjänst som implementeras eftersom det kan generera ökat värde.Frågeställning: Hur adderar homestyling värde till mäklarens tjänst?Syfte: Syftet med denna studie är att beskriva och analysera mäklares arbete med homestyling i sin mäklartjänst.Metod: Den kvalitativa studien utfördes genom enskilda intervjuer med fyra olika mäklarföretag. Intervjuerna var av semi-strukturerad form.Slutsats: Mäklare har identifierat ett sätt att skapa värde till sin mäklartjänst genom att erbjuda utformade paket där kärntjänsten kombinerats med ett antal tilläggstjänster, varav homestyling är en. Hur aktuellt fenomenet varit i de olika mäklarbyråerna över tid skiljer sig åt men idag arbetar alla med homestyling i hög grad.
9
Fryklund, Jenny. "Småskalig säsongslagring av solenergi för uppvärmning av bostäder : Simulering av lagerutformning och konsekvensen av adderade uppvärmningsbehov motsvarande en pool och ett atrium." Thesis, Karlstads universitet, Fakulteten för teknik- och naturvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-7164.
Full textAbstract:
The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest. Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage. The bigger a storage, the smaller the losses because of the decreasing relationship between surface area and storage volume. Looking at the size of the seasonal storages that are currently in operation, the question if seasonal storage is also suitable for installations designed for heat demands smaller than 400 MWh arises. Jonas Haglund at the architect office Skanark AB in Karlstad is planning an accommodation of 40 flats and hopes that seasonal stored solar energy can serve as the main energy source for space heating and hot water. In order to make housing more attractive he is considering the idea of adding other features, like a pool and an atrium, that also require heating but with lower temperature requirements. Haglund would like to investigate whether the efficiency of the solar collector increases when the extra energy demands are added and if the energy cost, for those demands, in this way can be reduced. The purpose of this study is to investigate the possibility of covering a large fraction of a small-scale annual heat demand corresponding to about 40 newly built apartments. The study shall present the solar fractions that can be achieved with different storage concepts when storage size and collector area is varied. The study will also answer how the solar fraction will change if a heating demand with lower temperature requirements and varied character is added to the basic domestic heating and if the added energy demand to some extent can be free. These questions are answered by calculations and simulations with the simulation software COMSOL Multiphysics. The results show that it is possible to obtain solar fractions above 80% with sufficient collector area. Suitable storage volume varies depending on the specific storage concept. Simulations of seasonal storage in a tank show that a storage volume of 13 m3/MWh is an appropriate size, while the corresponding figure for duct storage in clay is 20 m3/MWh. An added heating demand of low temperature character increases the efficiency of the solar panels and creates, so called, free energy.<br>Examensarbete
10
Niemi, Denise, and Jennie Östh. "Från e-handel till butik : Hur renodlade e-handelsföretag som adderar fysiska butiker arbetar för att förmedla en enhetlig bild av varumärket." Thesis, Linköpings universitet, Företagsekonomi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-119633.
Full textAbstract:
På senare tid har en ny trend inom multikanalförsäljning uppmärksammats, där renodlade e-handlare inser vikten av att finnas tillgängliga för kunden i flera försäljningskanaler och därför adderar en fysisk butik som försäljningskanal. Den nya trenden benämns i studien för Clicks to Bricks. När flera försäljningskanaler opererar under samma varumärke kan svårigheter uppstå i att förmedla en enhetlig bild av varumärket, vilket lyfts fram i befintlig litteratur kring multikanalförsäljning. Det finns dock inga tidigare studier som undersöker utmaningar i att förmedla en enhetlig bild av varumärket specifikt för företag som går från Clicks to Bricks. Baserat på att Clicks to Bricks är ett relativt nytt fenomen som växt fram är forskningen inom området bristfällig och ytterligare studier krävs därför för att ge en ökad förståelse för fenomenet.<br>Background: Recently, a new trend in multichannel retailing has been growing where pure eretailersare realizing the importance of being available to the customer in several sales channelsand therefore adds a physical store to its existing e-commerce. The new trend is further referredto as Clicks to Bricks. When multiple sales channels operate under the same brand difficultiesmay arise in conveying a consistent image of the brand, which is highlighted in the existingliterature on multi-channel retailing. However, there are no previous studies that examinechallenges in conveying a consistent image of the brand specifically for companies going fromClicks to Bricks. Based on the fact that Clicks to Bricks is a relatively new phenomenon thearea is fairly unexplored in the academic world, which means that further studies are needed toprovide a greater understanding of the phenomenon. Purpose: The study aims to provide a greater understanding of the phenomenon Clicks toBricks, by examining the reasons for pure e-tailers to add a physical store as a sales channel andhow they work to convey a consistent brand image. Completion: The study has the design of a multiple case study and has been conducted with aqualitative approach. The study's empirical data is collected from interviews with people onnine different companies that have gone from Clicks to Bricks. Conclusion: This study observes the fact that companies going from Clicks to Bricks haverecognized the importance of communicating a consistent brand across their sales channels.Companies have, however, started its work towards communicating a consistent image of thebrand at a late stage in the establishment process. The study identifies opportunities forimprovement in terms of conveying a consistent brand when it comes to companies going fromClicks to Bricks.
Books on the topic "Adderare"
1
ADHD medication abuse: Ritalin, Adderall, & other addictive stimulants. Mason Crest, 2015.
Find full text
2
The Adderall diaries: A memoir of moods, masochism, and murder. Graywolf Press, 2009.
Find full text
3
Parker, Philip M., and James N. Parker. Adderall: A medical dictionary, bibliography, and annotated research guide to internet references. ICON Health Publications, 2003.
Find full text
4
The amphetamine debate: The use of Adderall, Ritalin, and related drugs for behavior modification, neuroenhancement, and anti-aging purposes. McFarland & Co., 2011.
Find full text
7
Stanmyre, Jackie F. Ritalin and Adderall (Dangerous Drugs). Cavendish Square, 2015.
Find full text
8
Biederman, J., and Amy M. Horton. Pocket Pharma: Adderall XR and Attention Deficit Hyperactivity Disorder (Pocket Pharma). Science Press, 2002.
Find full text
9
Publications, ICON Health. Adderall: A Medical Dictionary, Bibliography, and Annotated Research Guide to Internet References. Icon Health Publications, 2003.
Find full textBook chapters on the topic "Adderare"
1
Sander, Jana. "Adderall (Amphetamine)." In Encyclopedia of Child Behavior and Development. Springer US, 2011. http://dx.doi.org/10.1007/978-0-387-79061-9_53.
Full text
2
Dubljević, Veljko. "Neuropharmacology, Addiction and Autonomy: A Proposal for Public Policy on Adderall and Ritalin as Pharmacological Enhancements." In The International Library of Ethics, Law and Technology. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13643-7_4.
Full text
3
"Adderall." In Encyclopedia of Child Behavior and Development. Springer US, 2011. http://dx.doi.org/10.1007/978-0-387-79061-9_6183.
Full text
4
"Adderall." In Encyclopedia of Autism Spectrum Disorders. Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4419-1698-3_100061.
Full text
5
"Adderall." In Encyclopedia of Autism Spectrum Disorders. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-91280-6_300047.
Full text
6
"Adderall/Adderall XR (Mixture with Other Amphetamines)." In Encyclopedia of Child Behavior and Development. Springer US, 2011. http://dx.doi.org/10.1007/978-0-387-79061-9_4746.
Full text
7
"Amphetamine mixed salts, extended release amphetamine mixed salts (generic) ��� Adderall, Adderall XR (brand)." In Psychotropic Drug Handout. Wiley Subscription Services, Inc., A Wiley Company, 2005. http://dx.doi.org/10.1002/0471922242.pdh00005.
Full text
8
Selikowitz, Mark. "A guide to specific medicines." In ADHD: The Facts. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198867371.003.0016.
Full textAbstract:
There are many different medications used for ADHD, and these should only be prescribed by a medical specialist experienced in this field. Many children with ADHD do not need to take their medication every day of the week. The availability of long-acting medication means that most children with ADHD do not need to take medication at school. This chapter presents a detailed guide to specific medicines for ADHD, including short-acting stimulant medicines (Ritalin, Focalin, dexamphetamine, and Adderall IR), long-acting stimulant medications (Concerta, Ritalin LA, Focalin XR, Daytrana, Adderall XR, Metadate CD, and Vyvanse), and non-stimulant medications (imipramine [Tofranil], Clonidine, guanfacine [Intuniv], and atomoxetine [Strattera]).
9
"Amphetamine and Dextroamphetamine (Adderall) Suspension 1 mg/mL*." In Extemporaneous Formulations for Pediatric, Geriatric, and Special Needs Patients. American Society of Health-System Pharmacists, 2016. http://dx.doi.org/10.37573/9781585285259.008.
Full text
10
Brody, David L. "Attention Deficit." In Concussion Care Manual. Oxford University Press, 2014. http://dx.doi.org/10.1093/med/9780199383863.003.0008.
Full textAbstract:
Many concussion patients who complain about problems with memory actually have an attention deficit. General measures: treat insomnia, stop alcohol, prescribe moderate cardiovascular exercise, and refer for cognitive rehabilitation (occupational and speech therapy). Consider treatment with a stimulant such as methylphenidate (Ritalin), amphetamine mixed salts (Adderall), and atomoxetine (Strattera), if appropriate, with careful monitoring for side effects. Contraindications include uncontrolled seizures, dangerous anxiety, active cardiovascular or cerebrovascular disease, active psychosis, drug abuse, irresponsible criminal behavior, dangerously underweight, and uncontrolled headaches. Recommend use is 6 days per week 51 weeks per year to reduce tolerance. Some patients find additional benefit from donepezil, rivastigmine, and regulated caffeine use. Approach options: “aggressive,” involving treatment with stimulants primarily based on history; “moderate,” involving treatment with stimulants only in patients with attention performance impairments documented with neuropsychological evaluation; and “conservative,” not including stimulants unless there is a well-documented history of preinjury attention deficit disorder.