Log in

Relevant bibliographies by topics / Adhesion to substrate

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Adhesion to substrate'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Adhesion to substrate.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Adhesion to substrate"

1

Hosoda, Naoe, and Stanislav N. Gorb. "Underwater locomotion in a terrestrial beetle: combination of surface de-wetting and capillary forces." Proceedings of the Royal Society B: Biological Sciences 279, no. 1745 (2012): 4236–42. http://dx.doi.org/10.1098/rspb.2012.1297.

Full text

Abstract:

For the first time, we report the remarkable ability of the terrestrial leaf beetle Gastrophysa viridula to walk on solid substrates under water. These beetles have adhesive setae on their feet that produce a secretory fluid having a crucial role in adhesion on land. In air, adhesion is produced by capillary forces between the fluid-covered setae and the substrate. In general, capillary forces do not contribute to adhesion under water. However, our observations showed that these beetles may use air bubbles trapped between their adhesive setae to walk on flooded, inclined substrata or even unde

APA, Harvard, Vancouver, ISO, and other styles

2

Stark, Alyssa Y., and Stephen P. Yanoviak. "Adhesion and running speed of a tropical arboreal ant ( Cephalotes atratus ) on wet substrates." Royal Society Open Science 5, no. 11 (2018): 181540. http://dx.doi.org/10.1098/rsos.181540.

Full text

Abstract:

In the tropical forest canopy, wingless worker ants must cling to and run along diverse vegetative surfaces with little protection from sun, wind and rain. Ants rely in part on their tiny adhesive tarsal pads to maintain sufficient contact with substrates to prevent falls under these varied conditions. Here, we examined the effects of substrate wettability and surface water on the tarsal pad adhesive performance of a common tropical arboreal ant. Ant adhesion was consistently higher on an intermediately wetting substrate (static water contact angle ca 90°) when resisting both perpendicular (no

APA, Harvard, Vancouver, ISO, and other styles

3

Murphy-Ullrich, J. E., and M. Höök. "Thrombospondin modulates focal adhesions in endothelial cells." Journal of Cell Biology 109, no. 3 (1989): 1309–19. http://dx.doi.org/10.1083/jcb.109.3.1309.

Full text

Abstract:

We examined the effects of thrombospondin (TSP) in the substrate adhesion of bovine aortic endothelial cells. The protein was tested both as a substrate for cell adhesion and as a modulator of the later stages of the cell adhesive process. TSP substrates supported the attachment of some BAE cells, but not cell spreading or the formation of focal adhesion plaques. In contrast, cells seeded on fibrinogen or fibronectin substrates were able to complete the adhesive process, as indicated by the formation of focal adhesion plaques. Incubation of cells in suspension with soluble TSP before or at the

APA, Harvard, Vancouver, ISO, and other styles

4

Podolnikova, Nataly P., Benjamin Bowen, Valeryi K. Lishko, Andriy V. Podolnikov, and Tatiana Ugarova. "Control of Platelet Adhesion by Rigidity Sensing at the Surface of Fibrin Clot." Blood 110, no. 11 (2007): 3906. http://dx.doi.org/10.1182/blood.v110.11.3906.3906.

Full text

Abstract:

Abstract Thrombus formation at sites of vascular injury must occur quickly to reduce blood loss, but is carefully controlled to limit vessel occlusion. Arrest of bleeding is mediated by adhesion and aggregation of platelets and the formation of the fibrin clot. While the interactions responsible for platelet adhesion and thrombus growth have been extensively researched, the mechanisms that limit platelet adhesion are not clear. We have previously demonstrated that plasma fibrinogen is a potent inhibitor of integrin-mediated leukocyte adhesion to fibrin clots and surface-bound fibrinogen, and h

APA, Harvard, Vancouver, ISO, and other styles

5

Katoh, Kazuo. "FAK-Dependent Cell Motility and Cell Elongation." Cells 9, no. 1 (2020): 192. http://dx.doi.org/10.3390/cells9010192.

Full text

Abstract:

Fibroblastic cells show specific substrate selectivity for typical cell–substrate adhesion. However, focal adhesion kinase (FAK) contributes to controlling the regulation of orientation and polarity. When fibroblasts attach to micropatterns, tyrosine-phosphorylated proteins and FAK are both detected along the inner border between the adhesive micropatterns and the nonadhesive glass surface. FAK likely plays important roles in regulation of cell adhesion to the substrate, as FAK is a tyrosine-phosphorylated protein that acts as a signal transduction molecule at sites of cell–substrate attachmen

APA, Harvard, Vancouver, ISO, and other styles

6

Dirks, Jan-Henning. "Physical principles of fluid-mediated insect attachment - Shouldn’t insects slip?" Beilstein Journal of Nanotechnology 5 (July 28, 2014): 1160–66. http://dx.doi.org/10.3762/bjnano.5.127.

Full text

Abstract:

Insects use either hairy or smooth adhesive pads to safely adhere to various kinds of surfaces. Although the two types of adhesive pads are morphologically different, they both form contact with the substrate via a thin layer of adhesive fluid. To model adhesion and friction forces generated by insect footpads often a simple “wet adhesion” model is used, in which two flat undeformable substrates are separated by a continuous layer of fluid. This review summarizes the key physical and tribological principles that determine the adhesion and friction in such a model. Interestingly, such a simple

APA, Harvard, Vancouver, ISO, and other styles

7

Taylor, James T., Rebekka Harting, Samer Shalaby, Charles M. Kenerley, Gerhard H. Braus, and Benjamin A. Horwitz. "Adhesion as a Focus in Trichoderma–Root Interactions." Journal of Fungi 8, no. 4 (2022): 372. http://dx.doi.org/10.3390/jof8040372.

Full text

Abstract:

Fungal spores, germlings, and mycelia adhere to substrates, including host tissues. The adhesive forces depend on the substrate and on the adhesins, the fungal cell surface proteins. Attachment is often a prerequisite for the invasion of the host, hence its importance. Adhesion visibly precedes colonization of root surfaces and outer cortex layers, but little is known about the molecular details. We propose that by starting from what is already known from other fungi, including yeast and other filamentous pathogens and symbionts, the mechanism and function of Trichoderma adhesion will become a

APA, Harvard, Vancouver, ISO, and other styles

8

Zhang, Cheng, Tuo Hu, and Na Zhang. "Influence of Substrate Hardness on Coating-Substrate Adhesion." Advanced Materials Research 177 (December 2010): 148–50. http://dx.doi.org/10.4028/www.scientific.net/amr.177.148.

Full text

Abstract:

Good coating-substrate adhesion is an essential requirement for almost all kinds of coated devices to perform normally and stay usable for a long period. Researchers have been developing many reliable means to characterize coating adhesion and have been exploring factors that might affect the adhesion status. In this paper, the influence of substrate hardness on coating-substrate adhesion was investigated. Zr and ZrN were coated onto steel substrates with different hardness. Critical loads of coated samples were determined by scratch test combined with microscopic observation. It is found that

APA, Harvard, Vancouver, ISO, and other styles

9

Bidanset, D. J., R. LeBaron, L. Rosenberg, J. E. Murphy-Ullrich, and M. Hook. "Regulation of cell substrate adhesion: effects of small galactosaminoglycan-containing proteoglycans." Journal of Cell Biology 118, no. 6 (1992): 1523–31. http://dx.doi.org/10.1083/jcb.118.6.1523.

Full text

Abstract:

Cell adhesion is a process which is initiated by the attachment of cells to specific sites in adhesive matrix proteins via cell surface receptors of the integrin family. This is followed by a reorganization of cytoskeletal elements which results in cell spreading and the formation of focal adhesion plaques. We have examined the effects of a class of small galactosaminoglycan-containing proteoglycans on the various stages of cell adhesion to fibronectin-coated substrates. Our results indicate that dermatan sulfate proteoglycans (DSPGs) derived from cartilage, as well as other related small prot

APA, Harvard, Vancouver, ISO, and other styles

10

Liu, Junjie, Nan Hu, Yao Xie, Peng Wang, Jingxiang Chen, and Qianhua Kan. "Polyacrylic Acid Hydrogel Coating for Underwater Adhesion: Preparation and Characterization." Gels 9, no. 8 (2023): 616. http://dx.doi.org/10.3390/gels9080616.

Full text

Abstract:

Underwater adhesion involves bonding substrates in aqueous environments or wet surfaces, with applications in wound dressing, underwater repairs, and underwater soft robotics. In this study, we investigate the underwater adhesion properties of a polyacrylic acid hydrogel coated substrate. The underwater adhesion is facilitated through hydrogen bonds formed at the interface. Our experimental results, obtained through probe-pull tests, demonstrate that the underwater adhesion is rapid and remains unaffected by contact pressure and pH levels ranging from 2.5 to 7.0. However, it shows a slight inc

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Adhesion to substrate"

1

Lufitha, Mundel. "Effect of substrate temperature on coating adhesion." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ58842.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Helbig, Ralf, Denise Günther, Jens Friedrichs, Florian Rößler, Andrés Lasagni, and Carsten Werner. "The impact of structure dimensions on initial bacterial adhesion." Royal Society of Chemistry, 2016. https://tud.qucosa.de/id/qucosa%3A35958.

Full text

Abstract:

Substrate topography can have profound effects on initial bacterial adhesion during biofilm formation. We applied Staphylococcus epidermidis and Escherichia coli cells onto periodically structured substrates with different structure dimensions, structure types and wetting properties. We found a strong dependence of cell retention on the structure dimensions of the applied substrates. Periodicities in the range of the cell size increased, whereas smaller periodicities decreased cell retention, independent of contact time (minutes to hours) and hydrophobicity. These novel insights on the role of

APA, Harvard, Vancouver, ISO, and other styles

3

Costa, Márcio Gabriel Silva. "APP RERMS enriched matrix as an adhesion substrate for neuritic outgrowth." Master's thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/16141.

Full text

Abstract:

Mestrado em Biomedicina Molecular<br>Specific domains can determine protein structural functional relationships. For the Alzheimer’s Amyloid Precursor Protein (APP) several domains have been described, both in its intracellular and extracellular fragments. Many functions have been attributed to APP including an important role in cell adhesion and cell to cell recognition. This places APP at key biological responses, including synaptic transmission. To fulfil these functions, extracellular domains take on added significance. The APP extracellular domain RERMS is in fact a likely candidate to be

APA, Harvard, Vancouver, ISO, and other styles

4

Ezeanochie, Tochukwu Chinedu. "Modelling and Simulation of Filopodial Protrusion." Thesis, Université d'Ottawa / University of Ottawa, 2015. http://hdl.handle.net/10393/32781.

Full text

Abstract:

The effect of substrate surface topology on the interaction of living cells with inanimate substrates is a well-established phenomenon. When cells are placed on biomaterials, they outgrow protrusions called filopodia that sense surface features in their immediate surroundings and initiate the formation of stable cell adhesion complexes closer to the cell body. Adhesion proteins permit filopodia to constantly explore the surrounding microenvironment. A better understanding of the relationship of filopodia with surface features is highly relevant for exploiting custom-made surfaces to guide cell

APA, Harvard, Vancouver, ISO, and other styles

5

Schwarz, Ulrich Sebastian. "Forces and elasticity in cell adhesion." Thesis, Universität Potsdam, 2004. http://opus.kobv.de/ubp/volltexte/2005/110/.

Full text

Abstract:

Das Verhalten adhärenter Zellen hängt stark von den chemischen, topographischen und mechanischen Eigenschaften ihrer Umgebung ab. Experimentelle Untersuchungen der letzten Jahre haben gezeigt, dass adhärente Zellen aktiv die elastischen Eigenschaften ihrer Umgebung erkunden, indem sie an dieser ziehen. Der resultierende Kraftaufbau hängt von den elastischen Eigenschaften der Umgebung ab und wird an den Adhäsionskontakten in entsprechende biochemische Signale umgewandelt, die zelluläre Programme wie Wachstum, Differenzierung, programmierten Zelltod und Zellbewegung mitbestimmen. Im Allgemeinen

APA, Harvard, Vancouver, ISO, and other styles

6

Khormaee, Sariah. "Optimizing siRNA Efficacy through Alteration in the Target Cell-Adhesion Substrate Interaction." Thesis, Harvard University, 2014. http://etds.lib.harvard.edu/hms/admin/view/59.

Full text

Abstract:

Short interfering RNA (siRNA) is a class of nucleotide drugs with a profound potential to improve patient health through its ability to silence the expression of specific genes at the post-transcriptional level. However, the clinical application of siRNA therapeutics remains hindered by a lack of efficient delivery systems that deposit siRNA into the cytoplasm of cells, a step necessary for siRNA’s silencing effect. Much research has focused on the development of siRNA delivery agents to overcome this challenge. There are no standard pre-clinical models for testing of siRNA delivery agents, an

APA, Harvard, Vancouver, ISO, and other styles

7

Jeyaranjan, Aadithya. "Adhesion of Germanium Electrode on Nickel Substrate for Lithium Ion Battery Applications." Scholar Commons, 2015. https://scholarcommons.usf.edu/etd/5509.

Full text

Abstract:

Lithium ion batteries (LIBs) have gained increasing popularity due to their high potential, low self-discharge, zero priming and minimal memory effect. However, the emergence of electrical vehicles and hybrid electrical vehicles in the automobile industry, where LIBs are predominantly in use, instilled a need to improve LIB batteries by experimenting with new materials. Graphite, the commonly used anode material for LIBs suffers from low theoretical capacity (372 mA h g-1) and torpid rate performance. Germanium (Ge) seems to be a promising substitute of carbon due to its high theoretical capac

APA, Harvard, Vancouver, ISO, and other styles

8

Golé, Laurent. "Migration of Dictyostelium Amoeba : role of Adhesion and Quorum sensing." Phd thesis, Université Claude Bernard - Lyon I, 2011. http://tel.archives-ouvertes.fr/tel-00846586.

Full text

Abstract:

This thesis focuses on the analysis of the role of adhesion between substrate and cell and factors of Quorum sensing on the migration of Dictyostelium amoeba. Tools to automate the recordings of videomicroscopy and image analysis have been developed to work with very large samples of cells and toquantify cell migration. A microfluidic device for cell detachment in hydrodynamic flow combined witha motorized stage has allowed a statistical study of adhesion but also the dynamics of detachment. The analysis of the migration of Dictyostelium in non nutritive medium highlights the role of density o

APA, Harvard, Vancouver, ISO, and other styles

9

Hillan, Marguerita Charlotte. "Investigations into steel substrate surface composition and the assessment of Cr. (VI) electrodeposit characteristics." Thesis, University of the West of Scotland, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.365054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Forsprecher, Jennifer. "Adhesion, proliferation and differentiation of MC3T3-E1 osteoblasts on transglutaminase substrate coated surfaces." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=82230.

Full text

Abstract:

Tissue transglutaminase (TG2) is a widely distributed, protein-cross-linking enzyme that creates high-molecular weight polymers from its substrate proteins. Its substrates in bone are mainly matricellular adhesion proteins: fibronectin (FN), osteopontin (OPN) and bone sialoprotein (BSP), which have been localized to the osteoid and to the pericellular matrix of osteocytes. The aim of this study was to compare in vitro the effects of monomeric versus polymeric FN, OPN and BSP on MC3T3-E1/C4 osteoblast adhesion, proliferation and differentiation. We showed that for each of the three TG2-m

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Adhesion to substrate"

1

Lufitha, Mundel. Effect of substrate temperature on coating adhesion. National Library of Canada, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Langhe, Rahul Pandurang. A novel role of Xenopus cadherin-11 in cell-substrate adhesion. s.n.], 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Peng, Zhilong. Bio-inspired Studies on Adhesion of a Thin Film on a Rigid Substrate. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46955-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Chander, Ashok Coil. Integrin-Linked Kinase, ECM Composition, and Substrate Rigidity Regulate Focal Adhesion - Actin Coupling, Modulating Survival, Proliferation and Migration: Towards a Biophysical Cancer Biomarker. [publisher not identified], 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Minett, William Timothy. Cell adhesion on synthetic polymer substrates. Aston University. Department of Molecular Sciences, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Scott, Snow W., Bowman Dan T, and National Risk Management Research Laboratory (U.S.), eds. Solvent-based to waterbased adhesive-coated substrate retrofit. U.S. Environmental Protection Agency, Office of Research and Development, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Scott, Snow W., Bowman Dan T, and National Risk Management Research Laboratory (U.S.), eds. Solvent-based to waterbased adhesive-coated substrate retrofit. U.S. Environmental Protection Agency, Office of Research and Development, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Scott, Snow W., Bowman Dan T, National Risk Management Research Laboratory (U.S.), and Air and Energy Engineering Research Laboratory., eds. Solvent-based to waterbased adhesive-coated substrate retrofit. U.S. Environmental Protection Agency, Office of Research and Development, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Scott, Snow W., Bowman Dan T, National Risk Management Research Laboratory (U.S.), and Air and Energy Engineering Research Laboratory., eds. Solvent-based to waterbased adhesive-coated substrate retrofit. U.S. Environmental Protection Agency, Office of Research and Development, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Scott, Snow W., Bowman Dan T, and National Risk Management Research Laboratory (U.S.), eds. Solvent-based to waterbased adhesive-coated substrate retrofit. U.S. Environmental Protection Agency, Office of Research and Development, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Adhesion to substrate"

1

Elzein, T., M. Brogly, and J. Schultz. "Organization of PCL-b-PMMA Diblock Thin Films: Relationship to the Adsorption Substrate Chemistry." In Adhesion. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607307.ch4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Startsev, V. M., R. Z. Kaz’mina, V. A. Ogarev, and V. N. Buryanenko. "Adhesion and Protective Properties of Polyamidoimide Coatings on Copper Substrate." In Adhesion 12. Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-1349-3_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Roberts, A. D. "Rubber Adhesion Variation with Dwell Time: Influence of Polymer Type, Substrate and Environment." In Adhesion 14. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0759-1_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pierres, A., A. M. Benoliel, and P. Bongrand. "Initial Steps of Cell-Substrate Adhesion." In Cell Mechanics and Cellular Engineering. Springer New York, 1994. http://dx.doi.org/10.1007/978-1-4613-8425-0_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Beningo, Karen A., and Yu-li Wang. "Double-Hydrogel Substrate as a Model System for Three-Dimensional Cell Culture." In Adhesion Protein Protocols. Humana Press, 2007. http://dx.doi.org/10.1007/978-1-59745-353-0_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bosanquet, David C., Keith G. Harding, and Wen G. Jiang. "ECIS, Cellular Adhesion and Migration in Keratinocytes." In Electric Cell-Substrate Impedance Sensing and Cancer Metastasis. Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-4927-6_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Iwamatsu, Masao. "Heterogeneous Nucleation on a Completely Wettable Substrate." In Advances in Contact Angle, Wettability and Adhesion. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118795620.ch3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Horiuchi, Shin. "Electron Microscopy for Visualization of Interfaces in Adhesion and Adhesive Bonding." In Interfacial Phenomena in Adhesion and Adhesive Bonding. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-4456-9_2.

Full text

Abstract:

AbstractThis chapter provides an overview of electron microscopy techniques to investigate interfaces in polymeric materials and adhesive bonds. First, how the instruments of energy-filtering transmission electron microscopy (EFTEM), scanning transmission electron microscopy (STEM), and scanning electron microscopy (SEM) work and are operated is briefly described. The principles of electron energy-loss spectroscopy (EELS) and energy-dispersive X-ray spectrometry (EDX), which are spectroscopic techniques associated with these instruments, are described. Next, the specimen preparation techniques

APA, Harvard, Vancouver, ISO, and other styles

9

Foa, C., M. Soler, M. Fraterno, et al. "Electron Microscopical Analysis of Cell-Cell and Cell-Substrate Interactions : Use of Image Analysis, X-Ray Microanalysis and EFTEM." In Studying Cell Adhesion. Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-662-03008-0_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Popov, Valentin L. "Adhesion of a Thin Soft Matter Layer: The Role of Surface Tension." In Springer Tracts in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_19.

Full text

Abstract:

AbstractWe consider an adhesive contact between a thin soft layer on a rigid substrate and a rigid cylindrical indenter (“line contact”) taking the surface tension of the layer into account. First, it is shown that the boundary condition for the surface outside the contact area is given by the constant contact angle—as in the case of fluids in contact with solid surfaces. In the approximation of thin layer and under usual assumptions of small indentation and small inclination angles of the surface, the problem is solved analytically. In the case of a non-adhesive contact, surface tension makes

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Adhesion to substrate"

1

Kovarik, O., M. Baryshnikova, R. Singh, et al. "Cold Sprayed Bell Metal: Improving Adhesion by Substrate Laser Surface Texturing." In ITSC 2025. ASM International, 2025. https://doi.org/10.31399/asm.cp.itsc2025p0391.

Full text

Abstract:

Abstract This study investigates improving the adhesion of bell metal repairs using substrate surface treatment. Copper-tin alloy (Cu20Sn) powder was deposited onto Cu20Sn substrates with various surface treatments, including ground, polished, cold spray (CS)-blasted, and laser-textured surfaces. Adhesion was tested using a bending method adapted for thick CS deposits. Results showed that CS-blasting achieved approximately 70 MPa adhesion, while laser texturing yielded up to 120 MPa.The adhesion strength was partially related to the adhesion area ratio, and fractographic analysis revealed the

APA, Harvard, Vancouver, ISO, and other styles

2

Muth, Martin, Andreas Freytag, René Nagelsdiek, and Ronald Brashear. "Improving Coating Performance by Using a Novel Polymeric Adhesion Promoter Technology." In SSPC 2016 Greencoat. SSPC, 2016. https://doi.org/10.5006/s2016-00008.

Full text

Abstract:

When coatings are applied to substrates as e.g. metal, the adhesion of the cured paint is a critical parameter for the final performance of the paint film. The adhesion of the paint to the substrate influences many properties of the paint, which including visual appearance, anticorrosive performance, flexibility, resistance against scribing and scratching, delamination, blistering and many more. Many actions can be taken to influence and improve the adhesion of a coating to a substrate.

APA, Harvard, Vancouver, ISO, and other styles

3

Zheng, Wei, and John J. Myers. "Adhesion Tests and Failure Modes Study on Structural Steel Coatings." In SSPC 2013 Greencoat. SSPC, 2013. https://doi.org/10.5006/s2013-00046.

Full text

Abstract:

Abstract Pull-off adhesion behaviors of 15 coating systems in three groups were studied utilizing test method ASTM D4541. Three groups of coating systems included coating systems with organic or inorganic zinc-rich primers, polymeric polyurea coatings, and overcoating systems applied on an existing coating system. The adhesion strength and failure mode of each coating system under different conditions were investigated and compared. The advantages and drawbacks for each coating group regarding adhesional performance were summarized in this paper. For most coating systems in this study, the imp

APA, Harvard, Vancouver, ISO, and other styles

4

Clark, Devin, Richard C. Ferguson, and James W. Rawlins. "Measurement of Internal Coating Stresses of MIL-PRF-23377 Top Coated with MIL-PRF-85285." In SSPC 2016 Greencoat. SSPC, 2016. https://doi.org/10.5006/s2016-00013.

Full text

Abstract:

Internal coatings stress (ICS) develops in coatings applied to a rigid substrates. During drying, volume changes due to solvent loss and/or cure induces stresses in the films. Differences in the thermal expansion coefficients of the coating and substrate also affect the ICS1. ICS affects the interfacial adhesion and results in delamination once the stress exceeds the force of adhesion. To measure ICS, a coating is applied to a thin strip of stainless steel and placed into a cantilever deflection apparatus (CDA, Figure 1), and the deflection from the base of the CDA to the bottom of the substra

APA, Harvard, Vancouver, ISO, and other styles

5

Clark, Devin, Richard C. Ferguson, and James W. Rawlins. "Measurement of Internal Coating Stresses of MIL-PRF-23377 Top Coated with MIL-PRF-85285." In SSPC 2015 Greencoat. SSPC, 2015. https://doi.org/10.5006/s2015-00010.

Full text

Abstract:

Internal coatings stress (ICS) develops in coatings applied to a rigid substrates. During drying, volume changes due to solvent loss and/or cure induces stresses in the films. Differences in the thermal expansion coefficients of the coating and substrate also affect the ICS1. ICS affects the interfacial adhesion and results in delamination once the stress exceeds the force of adhesion. To measure ICS, a coating is applied to a thin strip of stainless steel and placed into a cantilever deflection apparatus (CDA, Figure 1), and the deflection from the base of the CDA to the bottom of the substra

APA, Harvard, Vancouver, ISO, and other styles

6

Yang, Yutao. "Formulating High Performance Coatings with Novel Adhesion Test Methods." In SSPC 2015 Greencoat. SSPC, 2015. https://doi.org/10.5006/s2015-00065.

Full text

Abstract:

Abstract Adhesion performance is required for every coating system. The adhesion between coatings and substrates is one of the most critical determining factors in the overall success of any coating material. Material design and formulation are key components of high-performance coatings and rely heavily on the accurate measurement and evaluation of adhesion in the coating systems. In the course of our technology advancement, new adhesion test methods have been developed to enhance the formulations of water-based coatings and paints. With these new test methods, we can now understand the adhes

APA, Harvard, Vancouver, ISO, and other styles

7

Nixon, Randy, and Kirk Shields. "Adhesion Testing: How to Make It Stick in Assuring Coating Performance." In Coatings+ 2021. SSPC, 2021. https://doi.org/10.5006/s2021-00002.

Full text

Abstract:

Abstract It has become common practice for specification writers to require minimum tensile pull-off adhesion strength values as part of the acceptance criteria for protective coating work for concrete substrates. These values are convenient for specifiers because a minimum number provides a black and white basis upon which to define success versus failure. But there is much more to performing and evaluating adhesion testing than a hard and fast number. The minimum pull-off value is widely specified without any consideration for substrate strength, surface profile, substrate conditions, the te

APA, Harvard, Vancouver, ISO, and other styles

8

Lim, C. S., B. J. Zhang, S. H. Kim, and T. W. Jang. "Evaluation of Primers for Inner Hull of LNG Carriers." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04028.

Full text

Abstract:

Abstract Insulation panels are fitted to the inner hull of LNG carriers by bonding with a load bearing epoxy mastic adhesive onto the inner steel surface of the double hull. The steel surfaces of the hull are usually protected after blast cleaning with a wash primer. The adhesion strength between the steel surface and the primer will depend on various conditions; a number of factors will affect the adhesion such as steel surface preparation, the film thickness and types of primer used. In this study we evaluated the adhesion strength and their corrosion properties at different film thickness f

APA, Harvard, Vancouver, ISO, and other styles

9

Hassanin, Ahmed, Peter Yancey, Chris Alexander, Glenn Astolfi, Jeffrey Piascik, and Jeff Pavelka. "Surface and Defect Preparation Using Atmospheric Plasma for Non-Metallic Pipe Repair." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-18175.

Full text

Abstract:

ABSTRACT Atmospheric Plasma Solutions Inc. (APS) partnered with ADV Integrity, Inc. to conduct a testing program to evaluate the impact of atmospheric plasma surface preparation on the performance of composite systems used to repair defects in transmission pipelines. The APS surface treatment system provides a portable solution for coating removal and functionalizes surfaces to increase adhesion of resins/epoxy/coatings to the underlying substrate. Composite repair systems’ performance relies heavily on the levels of adhesion between the initial layer of the composite system and the substrate.

APA, Harvard, Vancouver, ISO, and other styles

10

Sarvestani, Alireza. "Kinetics of Membrane Spreading on Compliant Bio-Adhesive Substrates." In ASME 2010 First Global Congress on NanoEngineering for Medicine and Biology. ASMEDC, 2010. http://dx.doi.org/10.1115/nemb2010-13321.

Full text

Abstract:

The contact formation between cell membrane and a bio-adhesive substrate is driven by binding between transmembrane mobile receptors (e.g., integrin) and complementary ligand molecules on the substrate (fibronectin, collagen, etc.) This short range specific adhesion is alleviated by a phalanx of interfacial non-specific forces. In addition to cell-substrate interfacial interactions, cell adhesion can be mediated by a wide range of substrate physiochemical properties. In particular, mechanical stiffness of the substrate has been recognized as one of the major regulators for bio-adhesion. Cells

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Adhesion to substrate"

1

Bongsebandhu-phubhakdi, Saknan, and Anan Srikiatkhachorn. On-media axon branching and adhesion investigation of neurons as stimulated by modulated potentials on micro-patterned gold substrate. Faculty of Medicine, Chulalongkorn University, 2016. https://doi.org/10.58837/chula.res.2016.22.

Full text

Abstract:

The main focus of this research paper is on-media axon branching and adhesion investigation of neurons as stimulated by modulated potentials on micro-patterned gold substrate. Due to the prolonged and inefficient procedures of nerve repair, it is essential that we effectively incorporate different parameters and techniques as well as investigate cell-cell and cell-substrate interactions to explore new boundaries. This could lead to more operational options for nerve regeneration. Initially, the behavior of cell growth is first observed. 3T3 and Neuro2A cells are grown according to specific pro

APA, Harvard, Vancouver, ISO, and other styles

2

Lovell, Alexis, Garrett Hoch, Christopher Donnelly, Jordan Hodge, Robert Haehnel, and Emily Asenath-Smith. Shear and tensile delamination of ice from surfaces : The Ice Adhesion Peel Test (IAPT). Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/41781.

Full text

Abstract:

For decades, researchers have sought to understand the adhesion of ice to surfaces so that low-cost ice mitigation strategies can be developed. Presently, the field of ice adhesion is still without formal standards for performing ice adhesion tests. The U.S. Army Corps Engineers’ Research and Development Center’s Cold Regions Research and Engineering Laboratory (ERDC-CRREL) has a longstanding history as an independent third party for ice adhesion testing services. Most notably, CRREL’s Zero-Degree Cone Test (ZDCT) has been an industry favorite for more than 30 years. Despite its wide acceptanc

APA, Harvard, Vancouver, ISO, and other styles

3

Morrison, Mark, and Joshuah Miron. Molecular-Based Analysis of Cellulose Binding Proteins Involved with Adherence to Cellulose by Ruminococcus albus. United States Department of Agriculture, 2000. http://dx.doi.org/10.32747/2000.7695844.bard.

Full text

Abstract:

At the beginning of this project, it was clear that R. albus adhered tightly to cellulose and its efficient degradation of this polysaccharide was dependent on micromolar concentrations of phenylacetic acid (PAA) and phenylpropionic acid (PPA). The objectives for our research were: i) to identify how many different kinds of cellulose binding proteins are produced by Ruminococcus albus; ii) to isolate and clone the genes encoding some of these proteins from the same bacterium; iii) to determine where these various proteins were located and; iv) quantify the relative importance of these proteins

APA, Harvard, Vancouver, ISO, and other styles

4

Wongkasemjit, Sujitra. Comparison of titanium dioxide/silicon dioxide/zirconium dioxide synthesized via sol-gel process to be used as lens protection : final report. Chulalongkorn University, 2004. https://doi.org/10.58837/chula.res.2004.97.

Full text

Abstract:

Many hard coating materials have been developed and based on the use of metal alkoxide or organosiloxanes prepared via the sol-gel process. Titanium glycolate, zirconium glycolate and silatrane precursors were processed as hard coating materials for polyurethane lens. These precursors are inexpensive and the preparation reaction is simple and straightforward. The effects of the sol-gel process parameters, viz, the type of precursors, the coupling agent (GPTS), and the curing agent (3-APS) were investigated. The surface property evaluation of ophthalmic lens was conducted with respect to the sc

APA, Harvard, Vancouver, ISO, and other styles

5

Schneider, J. A., S. E. Guthrie, W. M. Clift, N. R. Moody, and M. D. Kriese. Impurity effects on the adhesion of aluminum films on sapphire substrates. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/676886.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Usov, Igor Olegovich, David M. Waschezyn, Douglas R. Vodnik, et al. Adhesion, microstructure and electrical resistance of sputtered Cu films on alumina substrates. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1569566.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Cui, Xiaojang, and Adrian Lee. Progesterone Regulation of Insulin Receptor Substrates Mediates Focal Adhesion Formation in Breast Cancer Cells. Defense Technical Information Center, 2003. http://dx.doi.org/10.21236/ada418730.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Askins, D. R., and Donald R. Byrge. Evaluation of 350F Curing Adhesive Systems on Phosphoric Acid Anodized Aluminum Substrates. Defense Technical Information Center, 1986. http://dx.doi.org/10.21236/ada181241.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Rushing, Rock. Evaluation of Adhesive Systems for Bonding 5109S Neoprene-to-Steel and Aluminum Substrates. Defense Technical Information Center, 1986. http://dx.doi.org/10.21236/ada193762.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Glauz, W. D., and Cecil Chappelow. L51467A On-Site Assessment of Mill-Applied Fusion-Bonded Coating Quality. Pipeline Research Council International, Inc. (PRCI), 1985. http://dx.doi.org/10.55274/r0010089.

Full text

Abstract:

This report is an addendum to L51467. The commercial application of rapid cure fusion bonded epoxy (FBE) coatings to line pipe is a fast operation. Accordingly, it is possible to coat a large number of pipe joints improperly before the inferior coating quality can be detected and the cause remedied. The quality control techniques currently used in coating plants are too slow to meet the demands of this coating and its application procedures. The primary goal of this program was to develop on-site, repeatable, accurate, and operatively simple test procedures that are capable of determining (a)

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!