Log in

Relevant bibliographies by topics / Adhesive process / Journal articles

To see the other types of publications on this topic, follow the link: Adhesive process.

Journal articles on the topic 'Adhesive process'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Adhesive process.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Ruffatto, Donald, Aaron Parness, and Matthew Spenko. "Improving controllable adhesion on both rough and smooth surfaces with a hybrid electrostatic/gecko-like adhesive." Journal of The Royal Society Interface 11, no. 93 (2014): 20131089. http://dx.doi.org/10.1098/rsif.2013.1089.

Full text

Abstract:

This paper describes a novel, controllable adhesive that combines the benefits of electrostatic adhesives with gecko-like directional dry adhesives. When working in combination, the two technologies create a positive feedback cycle whose adhesion, depending on the surface type, is often greater than the sum of its parts. The directional dry adhesive brings the electrostatic adhesive closer to the surface, increasing its effect. Similarly, the electrostatic adhesion helps engage more of the directional dry adhesive fibrillar structures, particularly on rough surfaces. This paper presents the ne

APA, Harvard, Vancouver, ISO, and other styles

2

Xu, Xiaoyan, Jinchan Peng, Jianjiang Yang, et al. "Effects of high polyamic acid content and curing process on properties of epoxy resins." e-Polymers 22, no. 1 (2022): 301–8. http://dx.doi.org/10.1515/epoly-2022-0028.

Full text

Abstract:

Abstract Epoxy/polyamic acid (EP/PAA) adhesives with high polyimide precursor-PAA content have been synthesized and then cured. The structure, thermal, and adhesive properties were investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, and tensile shear test. The effects of PAA content and curing process on the tensile shear strength were also studied. The results showed that the addition of PAA improved the heat resistance and reduced the water absorption. EP/PAA adhesive kept good adhesion. A kind of EP/PAA composite adhesive with excellent comprehensive propert

APA, Harvard, Vancouver, ISO, and other styles

3

Antosik, Adrian Krzysztof, and Nataniel Adrian Antosik. "Effect of the addition of selected silicon fillers on Si- PSA shrinkage." Journal of Analytical & Pharmaceutical Research 10, no. 4 (2021): 157–59. http://dx.doi.org/10.15406/japlr.2021.10.00380.

Full text

Abstract:

The concept of shrinkage phenomenon is widely described in the available literature. With respect to pressure-sensitive adhesives (PSA) in general, the definition of shrinkage is understood to be "less than its original size" and is closely related to the crosslinking process and the effect of the crosslinker on the test adhesive. Shrinkage alongside adhesive properties (adhesion, tackiness) and mechanical (cohesion) is one of the most important characteristics of a self-adhesive adhesive. It is very important in terms of production when receiving, for example, decorative banners or self-adhes

APA, Harvard, Vancouver, ISO, and other styles

4

Ricca, Frederico, Francisco J. Galindo-Rosales, Alireza Akhavan-Safar, et al. "Predicting the Adhesive Layer Thickness in Hybrid Joints Involving Pre-Tensioned Bolts." Polymers 16, no. 16 (2024): 2284. http://dx.doi.org/10.3390/polym16162284.

Full text

Abstract:

While most academic studies focus on the properties of cured joints, this research addresses the manufacturing process of hybrid joints in their uncured state. Hybrid joints that combine adhesive bonding with pre-tensioned bolts exhibit superior mechanical performance compared to exclusively bonded or bolted joints. However, the adhesive flow during manufacturing in hybrid joints often results in a nonuniform adhesive thickness, where obtaining an exact thickness is crucial for accurate load capacity predictions. This paper presents experiments involving three different adhesives, providing pr

APA, Harvard, Vancouver, ISO, and other styles

5

Vuksanović, Marija, Nataša Tomić, Ivana Mladenović, Tamara Perić, Bojan Gligorijević, and Radmila Jančić-Heinemann. "Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles." Tehnika 75, no. 4 (2020): 429–33. http://dx.doi.org/10.5937/tehnika2004429v.

Full text

Abstract:

Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental technology. The role of reinforcement is to adjust the mechanical properties, but also to control the shrinkage during curing. As reinforcement, alumina particles doped with iron oxide (Al2O3 Fe) synthesized using the sol-gel technique were selected. In order to simulate the process of adhesive application in real conditions, in vitro testing technique and adhesion properties of s

APA, Harvard, Vancouver, ISO, and other styles

6

Czech, Zbigniew, Agnieszka Kowalczyk, Karolina Górka, Urszula Głuch, Lu Shao, and Jolanta Świderska. "Influence of the unsaturated photoinitiators kind on the properties of uv-crosslinkable acrylic pressure-sensitive adhesives." Polish Journal of Chemical Technology 14, no. 3 (2012): 83–87. http://dx.doi.org/10.2478/v10026-012-0089-y.

Full text

Abstract:

UV-crossinkable pressure-sensitive adhesives (PSA) materials are called, in the adhesives trade photoreactive self-adhesive. UV-crosslinkable PSAs are designed after the UV-initiated crosslinking reaction to stick to almost any surface by a simple contact under light pressure. This special class of adhesives does not undergo any physical transformation or chemical reaction during the bonding process. Because of the rheological properties the adhesive must be fi nely tuned for the application, combining a carefully chosen polymer architecture and monomer composition with the proper addition of

APA, Harvard, Vancouver, ISO, and other styles

7

Müller, Miroslav. "Experimental Research on Load Capacity, Treatment of Adhesively Bonded Surface and Failure Process of Structural T-joint." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 64, no. 2 (2016): 473–79. http://dx.doi.org/10.11118/actaun201664020473.

Full text

Abstract:

In this paper the mechanical behaviour of structural two-component epoxy adhesives in T-joints is experimentally investigated. The aim of this study is to analyse the impact of the adhesive bonded surface treatment on the maximum force required to cause destruction, i.e. bearing capacity of T-joints bonded with various adhesives. Experimental results showed that the type of the adhesive affected the limit values of a force required for the destruction of the adhesive bond. The effect of the bonded surface treatment was also confirmed. From the results of experiment it was proved on five tested

APA, Harvard, Vancouver, ISO, and other styles

8

Mengüç, Yiğit, Michael Röhrig, Uyiosa Abusomwan, Hendrik Hölscher, and Metin Sitti. "Staying sticky: contact self-cleaning of gecko-inspired adhesives." Journal of The Royal Society Interface 11, no. 94 (2014): 20131205. http://dx.doi.org/10.1098/rsif.2013.1205.

Full text

Abstract:

The exceptionally adhesive foot of the gecko remains clean in dirty environments by shedding contaminants with each step. Synthetic gecko-inspired adhesives have achieved similar attachment strengths to the gecko on smooth surfaces, but the process of contact self-cleaning has yet to be effectively demonstrated. Here, we present the first gecko-inspired adhesive that has matched both the attachment strength and the contact self-cleaning performance of the gecko's foot on a smooth surface. Contact self-cleaning experiments were performed with three different sizes of mushroom-shaped elastomer m

APA, Harvard, Vancouver, ISO, and other styles

9

Kuo, Chung-Feng Jeffrey, Wei Lun Lan, Jui-Wen Wang, John-Ber Chen, and Pin-Hua Lin. "Hot-melt pressure-sensitive adhesive for seamless bonding of nylon fabric Part II: Process parameter optimization for seamless bonding of nylon fabric." Textile Research Journal 89, no. 12 (2018): 2294–304. http://dx.doi.org/10.1177/0040517518790970.

Full text

Abstract:

This study develops hot melt pressure sensitive adhesives (HMPSAs) for the seamless bonding of nylon fabric, using butyl acrylate as the main monomer material and mixing the functional monomer for polymerization. It is combined with 2-10phr diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide for the photoinitiator and ultraviolet irradiation is used to make a pre-polymer. The effects of butyl acrylate content, type of functional monomer, and 2-10phr diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide content on the molecular weight of acrylate pre-polymer are discussed, following the Taguchi metho

APA, Harvard, Vancouver, ISO, and other styles

10

Yao, Xingfang, Hongli Liu, and Congcong Li. "Development of Eco-Friendly Soy Meal Adhesives Enhanced by Ethylene Glycol Diglycidyl Ether." Advances in Polymer Technology 2019 (June 9, 2019): 1–7. http://dx.doi.org/10.1155/2019/8697047.

Full text

Abstract:

The ethylene glycol diglycidyl ether (EGDE) as a viscosity reducer, plasticizing agent, and crosslinking agent was introduced into the adhesive system to improve the properties of the soy-based adhesive. The adhesive properties including viscosity, solid content, and shear adhesion of soy protein adhesive were measured. The morphology, infrared spectra, and crystallinity of the cured adhesives were evaluated with scanning electron microscopy (SEM), Fourier transform infrared (FTIR), and X-ray diffraction (XRD). The results showed that the viscosity of soybean flour (SF) adhesive was reduced by

APA, Harvard, Vancouver, ISO, and other styles

11

Szalóki, Melinda, Zsófia Szabó, Renáta Martos, Attila Csík, Gergő József Szőllősi, and Csaba Hegedűs. "The Surface Free Energy of Resin-Based Composite in Context of Wetting Ability of Dental Adhesives." Applied Sciences 13, no. 21 (2023): 12061. http://dx.doi.org/10.3390/app132112061.

Full text

Abstract:

The surface roughness, surface free energy (SFE) of composites, and composite wettability by dental adhesives are determining factors in achieving a strong and durable adhesion (e.g., composite repair, luting adhesively bonded indirect restorations). In this study, the SFE of one nanohydrid and two bulk-fill composites was investigated in relation to the wetting ability of five different dental adhesives. The profilometry and scanning electron microscopy (SEM) measurement justified that the sandblasting produced a significantly rough surface in which the different filler amounts, filler distri

APA, Harvard, Vancouver, ISO, and other styles

12

Zeng, Fan, Julia Wunderer, Willi Salvenmoser, Thomas Ederth, and Ute Rothbächer. "Identifying adhesive components in a model tunicate." Philosophical Transactions of the Royal Society B: Biological Sciences 374, no. 1784 (2019): 20190197. http://dx.doi.org/10.1098/rstb.2019.0197.

Full text

Abstract:

Tunicates populate a great variety of marine underwater substrates worldwide and represent a significant concern in marine shipping and aquaculture. Adhesives are secreted from the anterior papillae of their swimming larvae, which attach and metamorphose into permanently adhering, filter-feeding adults. We recently described the cellular composition of the sensory adhesive organ of the model tunicate Ciona intestinalis in great detail. Notably, the adhesive secretions of collocytes accumulate at the tip of the organ and contain glycoproteins. Here, we further explore the components of adhesive

APA, Harvard, Vancouver, ISO, and other styles

13

Miranda, Riccardo, Marco Luciano, Vincenzo Fiore, and Antonino Valenza. "Development of Bio-Based and Recyclable Epoxy Adhesives by Modification with Thermoplastic Polymers." Polymers 17, no. 2 (2025): 131. https://doi.org/10.3390/polym17020131.

Full text

Abstract:

This paper deals with the design of novel epoxy adhesives by incorporating thermoplastic polymers such as polyetherimide (PEI) and poly(ε-caprolactone) (PCL) into a bio-based and recyclable epoxy resin, known as Polar Bear. The adhesives were characterized by their mechanical (quasi-static and dynamic) and rheological properties, thermal stability, and adhesion properties in single-lap joints tested at three different temperatures (i.e., −55 °C, 23 °C, 80 °C). The experimental results indicated that low PEI content substantially improved the mechanical performance and toughness of the adhesive

APA, Harvard, Vancouver, ISO, and other styles

14

Orazov, Mekan R., Viktor E. Radzinsky, Marina B. Khamoshina, Михалева M. Mikhaleva, and Sevinc Ya Ismailzade. "Anti-adhesive barriers in clinical practice: personalized patient management." Gynecology 23, no. 6 (2021): 480–84. http://dx.doi.org/10.26442/20795696.2021.6.201292.

Full text

Abstract:

The adhesive process is an urgent problem of operative gynecology. The number of women suffering from complications of the adhesive process is growing every year, not to mention the deaths associated with this problem. Polygenic etiology, low efficiency of treatment of the adhesion process determined the priority of searching for methods to prevent the process of adhesion formation or, at least, to reduce the severity of postoperative adhesion, at least a decrease in the severity of postoperative adhesion. The review presents the current paradigm of the pathogenesis of the formation of postope

APA, Harvard, Vancouver, ISO, and other styles

15

Rudawska, Anna, Arkadiusz Gola, Jakub Pizoń, Paweł Capała, and Łukasz Wójcik. "Effectiveness of Bonding Steel Elements with Polyester-Coated Paint." Applied Sciences 13, no. 18 (2023): 10059. http://dx.doi.org/10.3390/app131810059.

Full text

Abstract:

The aim of the paper is to assess the impact of the effectiveness of bonding steel elements with paint coating. The adhesive joints were made using two types of the adhesives: two-component epoxy resin adhesive based on Bisphenol A and polyurethane. Three types of adhesive joints were made: (i) reference samples, (ii) samples with a paint polyester coating, and (iii) samples with a zinc primer and paint polyester coating. These coatings were applied using the electrokinetic method. A shear strength test of the adhesive joints (EN DIN 1465 standard), a coating adhesion test (ASTM D3359-B standa

APA, Harvard, Vancouver, ISO, and other styles

16

Minosi, Stefania, Fabrizio Moroni, and Alessandro Pirondi. "Evaluation of XD 10 Polyamide Electrospun Nanofibers to Improve Mode I Fracture Toughness for Epoxy Adhesive Film Bonded Joints." Processes 11, no. 5 (2023): 1395. http://dx.doi.org/10.3390/pr11051395.

Full text

Abstract:

The demand for ever-lighter structures raises the interest in bonding as a joining method, especially for materials that are difficult to join with traditional welding and bolting techniques. Structural adhesives, however, are susceptible to defects, but can be toughened in several ways: by changing their chemical composition or by adding fillers, even of nanometric size. Nanomaterials have a high surface area and limited structural defects, which can enhance the mechanical properties of adhesives depending on their nature, quantity, size, and interfacial adhesion. This work analyzes the Mode

APA, Harvard, Vancouver, ISO, and other styles

17

Jennings, Jessica, and Melissa Cannon. "Supporting Manufacturing Process Changes with an Innovative Microscopy Method." Forest Products Journal 74, S2 (2024): 9–13. http://dx.doi.org/10.13073/fpj-d-24-00008.

Full text

Abstract:

Abstract Bakelite Chemicals LLC has developed an innovative microscopy technique to view adhesives “in use.” The cornerstone of the method is based on sample preparation. Samples of a composite wood product are sanded to a highly polished surface using a progression of sandpaper grits from lowest to highest. This preparation technique differs significantly from historical preparation techniques, which rely on soaking or embedding samples followed by thin-section creation using a microtome. The wet preparation technique causes wood cells compressed during production of the composite to swell an

APA, Harvard, Vancouver, ISO, and other styles

18

Szewczak, Andrzej, and Maciej Szeląg. "Physico-Mechanical and Rheological Properties of Epoxy Adhesives Modified by Microsilica and Sonication Process." Materials 13, no. 23 (2020): 5310. http://dx.doi.org/10.3390/ma13235310.

Full text

Abstract:

Industrial waste from the production of metallic silicon and silicon–iron alloys, which includes silica fumes (microsilica), is subject to numerous applications aiming at its reuse in concrete and polymeric composites. Recycling solves the problem of their storage and adverse environmental impact. Six different formulas of epoxy resins were tested, differing in the type of polymer, the mixing process (sonication or not) and the presence of microsilica. The study showed that microsilica added to the epoxy resin changes its viscosity and free surface energy, and these are the parameters that det

APA, Harvard, Vancouver, ISO, and other styles

19

Libonati, Antonio, Virginia Di Taranto, Lucia Memè, Gianni Gallusi, and Vincenzo Campanella. "SEM Evaluation of the Hybrid Layer of Two Universal Adhesives on Sound and DI Type II Affected Dentin." Applied Sciences 12, no. 22 (2022): 11372. http://dx.doi.org/10.3390/app122211372.

Full text

Abstract:

Universal nanofilled adhesives were recently introduced in restorative dentistry to simplify clinical procedures and improve adhesion in different clinical situation. This study investigated the effectiveness of two universal adhesives on both sound and dentinogenesis imperfecta type II (DI-II)-affected teeth. To evaluate the effectiveness of adhesion on both sound and DI-II-affected teeth, four samples, two sound extracted molars and two extracted molars affected by DI-II were selected. Coronal enamel and dentin were exposed, and the samples were used for testing two different universal adhes

APA, Harvard, Vancouver, ISO, and other styles

20

Yang, Minliang, and Kurt A. Rosentrater. "Life Cycle Assessment and Techno-Economic Analysis of Pressure Sensitive Bio-Adhesive Production." Energies 12, no. 23 (2019): 4502. http://dx.doi.org/10.3390/en12234502.

Full text

Abstract:

Bioproducts have attracted much attention in recent years due to the increasing environmental concerns about petroleum products. In this study, we aimed to explore potential environmental impacts and economic feasibility of pressure sensitive bio-adhesive (PSA) produced from the reversible addition-fragmentation chain transfer polymerization process. A detail process model of pressure sensitive bio-adhesive was developed in order to thoroughly understand both economic and environmental impacts of this production process. Life cycle assessment results showed that the overall environmental impac

APA, Harvard, Vancouver, ISO, and other styles

21

Jiang, Qijun, Liuwei Wang, Zhiyuan Weng, Zhouyi Wang, Zhendong Dai, and Weidong Chen. "Effect of the Structural Characteristics on Attachment-Detachment Mechanics of a Rigid-Flexible Coupling Adhesive Unit." Biomimetics 7, no. 3 (2022): 119. http://dx.doi.org/10.3390/biomimetics7030119.

Full text

Abstract:

The terminal toes of adhesive animals are characterized by rigid-flexible coupling, and their structure–function relationship is an urgent problem to be solved in understanding bioinspired adhesive systems and the design of biomimetic adhesive units. In this paper, inspired by the rigid-flexible coupling adhesive system of the gecko toe, a rigid-flexible coupling adhesive unit was designed, the interface strength of the adhesives under different preloads was tested, and the model and analysis method of the compression and peeling process of the rigid-flexible coupling adhesive unit was establi

APA, Harvard, Vancouver, ISO, and other styles

22

Petrie, Laurenne E., Allison C. Leonard, Julia Murphy, and Georgina Cox. "Development and validation of a high-throughput whole cell assay to investigate Staphylococcus aureus adhesion to host ligands." Journal of Biological Chemistry 295, no. 49 (2020): 16700–16712. http://dx.doi.org/10.1074/jbc.ra120.015360.

Full text

Abstract:

Staphylococcus aureus adhesion to the host's skin and mucosae enables asymptomatic colonization and the establishment of infection. This process is facilitated by cell wall-anchored adhesins that bind to host ligands. Therapeutics targeting this process could provide significant clinical benefits; however, the development of anti-adhesives requires an in-depth knowledge of adhesion-associated factors and an assay amenable to high-throughput applications. Here, we describe the development of a sensitive and robust whole cell assay to enable the large-scale profiling of S. aureus adhesion to hos

APA, Harvard, Vancouver, ISO, and other styles

23

Zhang, Wei Li, Jian Jun Chen, Man Lin Tan, et al. "UV-Radiation Curing Process of Cationic Epoxy Adhesive Materials." Advanced Materials Research 983 (June 2014): 222–25. http://dx.doi.org/10.4028/www.scientific.net/amr.983.222.

Full text

Abstract:

The effect of photoinitiator content and species for adhesive liquid-solid conversion rate was studied. The infrared spectras of the alicyclic epoxy resin adhesives before and after the UV light curing were detected by FTIR. Thus light curing process for the alicyclic epoxy adhesive material was explored. The results showed that the UV light curing speed of Omnicat 550 was slower than that of Omnicat 650. Furthermore, the liquid-solid conversion rate was the maximum when the photoinitiator was added up to 3% with the same agent and coating thickness.

APA, Harvard, Vancouver, ISO, and other styles

24

DADMOHAMADI, Kobra. "FACILITATING THE APPLICATION OF STARCH PASTE IN THE CONSERVATION OF PAPER ARTWORKS." International Journal of Conservation Science 15, no. 1 (2024): 403–14. http://dx.doi.org/10.36868/ijcs.2024.01.02.

Full text

Abstract:

Starch paste is an adhesive that is used in the field of book and paper conservation. This adhesive has a very short shelf life, and for this reason, it must be prepared in small quantities. Also, preparing starch paste for use in protection is a time-consuming process. This research was done with the aim of facilitating the use of starch paste in the conservation of paper works, long-term storage of starch pastes without fungicidal additives and increasing its durability in the long term without changing the quality of the adhesive. The application of fresh starch pastes and activated starch

APA, Harvard, Vancouver, ISO, and other styles

25

Nassiet, Valérie, Celine Gros, Mathieu Charlas, and Jean-Pierre Habas. "Chemical Structure Influence of Silicone Adhesives on Curing Process." Advanced Materials Research 112 (May 2010): 19–28. http://dx.doi.org/10.4028/www.scientific.net/amr.112.19.

Full text

Abstract:

The density increase of components used in power converters involves cooling problems and results to the use of new materials and innovative assembly processes (such as adhesive bonding). Searching for an adhesive family leads to the silicones. This paper focuses on the silicone adhesive formulation as regards the use requirements (temperature range, chemical agents). This first article is dealing with the influence of chemical structure on vulcanization process parameters and physical properties before ageing. The first adhesive family is the oxime terminated polydimethylsiloxane (PDMS) adhes

APA, Harvard, Vancouver, ISO, and other styles

26

Manuja, N., R. Nagpal, and IK Pandit. "Dental Adhesion." Journal of Clinical Pediatric Dentistry 36, no. 3 (2012): 223–34. http://dx.doi.org/10.17796/jcpd.36.3.68805rl1r037m063.

Full text

Abstract:

Contemporary dental adhesives show favorable immediate results in terms of bonding effectiveness. However, the durability of resin-dentin bonds is their major problem. It appears that simplification of adhesive techniques is rather detrimental to the long term stability of resin-tooth interface. The hydrostatic pulpal pressure, the dentinal fluid flow and the increased dentinal wetness in vital dentin can affect the intimate interaction of certain dentin adhesives with dentinal tissue. Bond degradation occurs via water sorption, hydrolysis of ester linkages of methacrylate resins, and activati

APA, Harvard, Vancouver, ISO, and other styles

27

Ayushinova, N. I., I. A. Shurygina, E. G. Grigoriev, and M. G. Shurygin. "Inducement of experimental Abdominal Adhesions (literature review)." Acta Biomedica Scientifica 3, no. 6 (2019): 107–13. http://dx.doi.org/10.29413/abs.2018-3.6.15.

Full text

Abstract:

Adhesive disease of the abdominal cavity is a common medical problem that impairs the patients’ life quality. Adhesive intestinal obstruction ranks first in the structure of acute bowel obstruction. The levels of complications and postoperative mortality are not likely to decrease. Consequently, the studies on preventing adhesive disease are still in progress, which requires an animal model to induce abdominal adhesive process. Numerous factors of peritoneum injury result in adhesion formation. Experimental surgery offers various techniques of inducing the adhesive process in the abdominal cav

APA, Harvard, Vancouver, ISO, and other styles

28

Dasaesamoh, Abedeen, Ajaman Adair, and Suradet Matchawet. "Effect of Magnesium Hydroxide on Flame Retardant Properties for Adhesive Materials by Solution Mixing Process." Journal of Physics: Conference Series 2049, no. 1 (2021): 012006. http://dx.doi.org/10.1088/1742-6596/2049/1/012006.

Full text

Abstract:

Abstract The objective of this research was to investigate the effect of magnesium hydroxide on the flame retardant properties of adhesive materials. The amount of magnesium hydroxide was varied from 2.5 to 10 phr. The adhesive preparation was performed by means of an aqueous filler dispersion technique. The dispersion of magnesium hydroxide in adhesive was observed by SEM images. The mechanical property of the adhesive joint was conducted by shear stress according to the ASTM D1002 standard. The flame retardant property of adhesives was measured in the horizontal burning testing method. The r

APA, Harvard, Vancouver, ISO, and other styles

29

Lokhande, Rupesh, Abhijeet Deshpande, and Ashok Mache. "Taguchi Analysis of Bonded Single-Lap Joint in Hemp Fiber Composite." International Journal of Engineering Technology and Sciences 3, no. 1 (2016): 27–33. http://dx.doi.org/10.15282/ijets.5.2016.1.4.1043.

Full text

Abstract:

The adhesively bonded joints in composite structures are widely used in aerospace and automobile fields. Hemp epoxy composites are better alternative due to its lower specific gravity and higher toughness. . The joining process is inevitable in the application of such composites. The mechanical behaviour of such joints depends on the strength of the composite, adhesive strength and adhesion phenomenon between substrate and adhesive. The influence of overlap length, adhesive layer thickness and cure temperature on the performance of adhesive joints investigated experimentally. The influence of

APA, Harvard, Vancouver, ISO, and other styles

30

Andrews, E. H. "Analysis of Adhesive Failure Using Generalised Fracture Mechanics." Progress in Rubber and Plastics Technology 5, no. 2 (1989): 89–111. https://doi.org/10.1177/147776068900500202.

Full text

Abstract:

Fracture mechanics analysis is of great value in adhesion studies since it defines adhesive failure parameters that are, in principle, independent of the test employed and thus characteristic of the adhesive bond itself (1) . The chief drawback of fracture mechanics is that the fracture parameters obtained are purely empirical quantities and are not explicitly related to the surface or mechanical properties of the adhering phases. Generalised fracture mechanics (GFM) seeks to overcome this problem by expressing the adhesive failure parameters in terms of the interfacial energy and the mechanic

APA, Harvard, Vancouver, ISO, and other styles

31

Lee, Jun Hyup. "Highly Adhesive and Sustainable UV/Heat Dual-Curable Adhesives Embedded with Reactive Core-Shell Polymer Nanoparticles for Super-Narrow Bezel Display." Materials 13, no. 16 (2020): 3492. http://dx.doi.org/10.3390/ma13163492.

Full text

Abstract:

To achieve the seamless characteristics of displays, liquid crystal (LC) devices need a super-narrow bezel design. This device architecture can be constructed using functional adhesives that possess excellent physical and chemical properties. In this study, mechanically robust ultraviolet (UV)/heat dual-curable adhesives with outstanding reliability and processability have been fabricated using reactive poly(methyl methacrylate) (PMMA)/polyethyleneimine (PEI) core-shell nanoparticles. Their curing characteristics, narrow drawing processability, adhesive strength, elongation at break, and the c

APA, Harvard, Vancouver, ISO, and other styles

32

Isaev, A. Yu, O. I. Smirnov, E. V. Rubtsova, and A. P. Petrova. "PROPERTIES AND APPLICATIONS AREAS OF THE ADHESIVE VKR-85." Proceedings of VIAM, no. 5 (2021): 48–55. http://dx.doi.org/10.18577/2307-6046-2021-0-5-48-55.

Full text

Abstract:

The properties of the adhesive VKR-85 recommended for gluing rubbers, rubber fabric materials bands together and gluing them to metals during the vulcanization process are given. It is shown for which types of rubbers the adhesive can be used, performance of adhesive joints under the influence of various factors. A comparison of the properties of the adhesive joints based on adhesive VKR-85 with adhesives of a similar purpose – Leuconate and Desmodur RE is given. Adhesive joints strength made with adhesive VKR-85 is higher than strength of the bonded rubber.

APA, Harvard, Vancouver, ISO, and other styles

33

Sucipto, Tito, and Toba Wijaya Lumbantoruan. "Characteristics of wood adhesive made of gambier from Dairi and Pakpak Bharat, North Sumatra." IOP Conference Series: Earth and Environmental Science 1445, no. 1 (2025): 012045. https://doi.org/10.1088/1755-1315/1445/1/012045.

Full text

Abstract:

Abstract Plywood is a processed wood derivative product with a growing demand. Over the past few decades, adhesives based on urea formaldehyde, phenol formaldehyde, resorcinol formaldehyde, and polystyrene, derived from petroleum, have been used in manufacture process. These adhesives are expensive and often cause harmful effects on health. According to several studies, UF and PF adhesives contain about 1-3% free formaldehyde. In this study, the adhesive used release free formaldehyde of 0.13-1.21%, which is relatively low. Gambier is a vegetable material with abundant condensed tannins (catec

APA, Harvard, Vancouver, ISO, and other styles

34

Dubon, Juliette, Gonzalo Seisdedos, Dillon Watring, et al. "Multifunctional MEN-Doped Adhesives: Strengthening, Bond Quality Evaluation, and Variations in Magnetic Signal with Environmental Exposure." Applied Sciences 12, no. 16 (2022): 8238. http://dx.doi.org/10.3390/app12168238.

Full text

Abstract:

Adhesive bonding of polymer matrix composites offers various advantages over traditional fasteners, such as a uniform stress state, reduced weight, and delay of composite delamination. However, adhesive bonding has limited implementation due to challenges in the prediction of durability. This work introduces a new method to monitor an adhesively bonded composite joint by dispersing magneto-electric nanoparticles (MENs) into the polymer precursor and monitoring changes in their surface charge density by evaluating the output magnetic signal under an applied magnetic field. Real-time monitoring

APA, Harvard, Vancouver, ISO, and other styles

35

Müller, M. "Influence of surface integrity on bonding process." Research in Agricultural Engineering 57, No. 4 (2011): 153–62. http://dx.doi.org/10.17221/39/2010-rae.

Full text

Abstract:

Adhesive bonding technology is successfully applied partly in the primary production, partly in the renovation in various fields of human activities. This fact emphasizes the importance of the partial factors research, which influence is essential for the quality, reliability and necessarily the usable life of bonded joints. The mechanical preparation of bonded surface is a varied process which influences directly the resultant bonded joint quality. The aim of the bonded surface mechanical preparation is the adhesion improvement in the adhesive &ndash; adherend interface. For mechanical pr

APA, Harvard, Vancouver, ISO, and other styles

36

Sang, Zi Tao, Shi Feng Zhang, Qiang Gao, and Jian Zhang Li. "Preparation and Application of Modified Soybean Protein Adhesives." Advanced Materials Research 139-141 (October 2010): 706–9. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.706.

Full text

Abstract:

In this study, a sodium hydroxide modified soybean protein adhesive (NSP adhesive) was prepared and mixed with phenol-formaldehyde (PF) resin in a ratio of 7:3 to form a compound adhesive (NSPF adhesive), and three-layer plywoods were prepared using the NSP adhesive and the NSPF adhesive. In order to understand the reactions between SP and PF resin during the curing process of NSPF adhesive, the SEM and FTIR spectra were employed to character the adhesives and the bonding strength of the plywoods was measured. The results showed that the bonding strength of the poplar plywood prepared with NSP

APA, Harvard, Vancouver, ISO, and other styles

37

Luo, Jing, Ying Zhou, Yi Zhang, Qiang Gao, and Jianzhang Li. "An Eco-Effective Soybean Meal-Based Adhesive Enhanced with Diglycidyl Resorcinol Ether." Polymers 12, no. 4 (2020): 954. http://dx.doi.org/10.3390/polym12040954.

Full text

Abstract:

Soybean meal-based adhesive is a good wood adhesive mainly due to its renewable, degradable, and environmentally friendly features. To improve the enhancement efficiency for adhesives, diglycidyl resorcinol ether (DRE) containing a benzene ring and flexible chain structure was used as an efficient cross-linker to enhance the adhesive in the study. The physicochemical properties of adhesives, the dry shear strength, and wet shear strength of plywood were measured. Results suggested that DRE reacted with the functional groups of soybean meal adhesive and formed a cross-linking network during hot

APA, Harvard, Vancouver, ISO, and other styles

38

Sergeev, Alexey Nikolaevich, Artem Mikhailovich Morozov, Nikolay Yurievich Epifanov, Andrei M. Rachek, and Merjen Kerimova. "Methods for Assessing the Severity of Adhesions in the Experiment and Clinical Setting." Journal of Experimental and Clinical Surgery 15, no. 3 (2022): 254–61. http://dx.doi.org/10.18499/2070-478x-2022-15-3-254-261.

Full text

Abstract:

The paper highlights major known approaches for an objective assessment of the severity of the adhesive process in the abdominal cavity. The scales used in experimental studies in vivo and in the clinic are considered separately. Considering various goals and objectives of experimental study, a wide range of scales has been proposed, taking into account the type of animals, the degree of the surgical zone involvement in the adhesive process, deformation of a hollow organ, degree of prevalence of the process in the abdominal cavity, adhesion density and shape, their vascularization, or a combin

APA, Harvard, Vancouver, ISO, and other styles

39

Yasuda, Kiyokazu, Jong-Min Kim, and Kozo Fujimoto. "Adhesive Joining Process and Joint Property With Low Melting Point Filler." Journal of Electronic Packaging 127, no. 1 (2005): 12–17. http://dx.doi.org/10.1115/1.1846060.

Full text

Abstract:

In order to conquer the limitation of conventional solders and adhesives used in electronics packaging, a novel self-organized joining process using conductive adhesive with low melting point alloy was proposed. As a basic characteristic of the adhesive paste, the differential scanning calorimetry analysis was carried out. Joint morphology, the formation of conduction path, and the self-organized characteristics were examined. Melting fillers were preserved their initial spherelike form for nonreductive adhesive, although enlargement of the alloy colony occurred in the case of the reductive po

APA, Harvard, Vancouver, ISO, and other styles

40

Liu, Jiani, Junyi Song, Ling Zeng, and Biru Hu. "An Overview on the Adhesion Mechanisms of Typical Aquatic Organisms and the Applications of Biomimetic Adhesives in Aquatic Environments." International Journal of Molecular Sciences 25, no. 14 (2024): 7994. http://dx.doi.org/10.3390/ijms25147994.

Full text

Abstract:

Water molecules pose a significant obstacle to conventional adhesive materials. Nevertheless, some marine organisms can secrete bioadhesives with remarkable adhesion properties. For instance, mussels resist sea waves using byssal threads, sandcastle worms secrete sandcastle glue to construct shelters, and barnacles adhere to various surfaces using their barnacle cement. This work initially elucidates the process of underwater adhesion and the microstructure of bioadhesives in these three exemplary marine organisms. The formation of bioadhesive microstructures is intimately related to the aquat

APA, Harvard, Vancouver, ISO, and other styles

41

Liu, Mary, and Wusheng Yin. "An Innovative High Thermal Conductive Solderable Adhesive." International Symposium on Microelectronics 2011, no. 1 (2011): 000852–56. http://dx.doi.org/10.4071/isom-2011-wp6-posterpapers-paper2.

Full text

Abstract:

With increasing LED development and production, thermal issues are becoming more and more important for LED devices, particularly true for high power LED and also for other high power devices. In order to dissipate the heat from the device efficiently, Au80Sn20 alloy is being used in the industry now. However there are a few drawbacks for Au80Sn20 process: (1) higher soldering temperature, usually higher than 320 °C; (2) low process yield; (3) too expensive. In order to overcome the shortcomings of Au80Sn20 process, YINCAE Advanced Materials, LLC has invented a new solderable adhesive – TM 230

APA, Harvard, Vancouver, ISO, and other styles

42

Kowalczyk, Agnieszka, Marta Tokarczyk, Mateusz Weisbrodt, and Konrad Gziut. "Adhesive Films Based on Benzoxazine Resins and the Photoreactive Epoxyacrylate Copolymer." Materials 15, no. 5 (2022): 1839. http://dx.doi.org/10.3390/ma15051839.

Full text

Abstract:

UV-cross-linkable and thermally curable self-adhesive structural tapes (SATs) were compounded using solid commercial benzoxazine resins (Araldite MT 35700 and Araldite MT 35910) and a photoreactive epoxyacrylate copolymer (EAC). As initiators of benzoxazine resin polymerization and epoxy component cationic polymerization, two kinds of latent curing agents (LCAs) were tested, i.e., amine type and ionic liquid type. The influence of the benzoxazine resin and the LCA type on the UV-cross-linking process, the self-adhesive features and thermal curing behavior of UV-cross-linked tapes, as well as t

APA, Harvard, Vancouver, ISO, and other styles

43

Roy, S., and J. N. Reddy. "Nonlinear Viscoelastic Finite Element Analysis of Adhesive Joints." Tire Science and Technology 16, no. 3 (1988): 146–70. http://dx.doi.org/10.2346/1.2148803.

Full text

Abstract:

Abstract A good understanding of the process of adhesion from the mechanics viewpoint and the predictive capability for structural failures associated with adhesively bonded joints require a realistic modeling (both constitutive and kinematic) of the constituent materials. The present investigation deals with the development of an Updated Lagrangian formulation and the associated finite element analysis of adhesively bonded joints. The formulation accounts for the geometric nonlinearity of the adherends and the nonlinear viscoelastic behavior of the adhesive. Sample numerical problems are pres

APA, Harvard, Vancouver, ISO, and other styles

44

Müller, M. "Influence of loading speed on a change of parameters of adhesive bonds based on cyanoacrylates." Research in Agricultural Engineering 61, No. 4 (2016): 177–82. http://dx.doi.org/10.17221/15/2015-rae.

Full text

Abstract:

The paper deals with a behaviour of adhesive bonds created by means of quick-setting adhesives at different speeds of a loading. The aim of the research was to simulate a change of a bearing capacity of the adhesive bond at marginal limits foregoing the bond destruction. Application of quick&ndash;setting adhesives based on cyanoacrylates is considerably spread in a technical practice. Its advantage is speed of a hardening process. A fast creation of a bond and a possibility of fast manipulation with the adhesive bond are connected with it. The manipulation strength of the adhesive bond is

APA, Harvard, Vancouver, ISO, and other styles

45

Müller, Miroslav, and Rastislav Mikuš. "Setting Marginal Limits of Stress of Quick-Setting Adhesives Based on Cyanoacrylates." Advanced Materials Research 1059 (December 2014): 99–104. http://dx.doi.org/10.4028/www.scientific.net/amr.1059.99.

Full text

Abstract:

The application of quick-setting adhesives based on cyanoacrylates is considerably spread in technical practice. The limit of these adhesives is the 'zero layer' of the adhesive. The advantage is in the speed of hardening process. A fast creation of bond, minimalizing of fixation means, and the possibility of fast manipulation with the adhesive bond are connected with that. The goal of the research is to describe the behaviour of quick-setting adhesives based on cyanoacrylates at different speed of deformation of adhesive bonds in the interval from 1 mm.min-1 to 48 mm.min-1. The change of adhe

APA, Harvard, Vancouver, ISO, and other styles

46

Idrissa, Khaoula, Aurélien Maurel-Pantel, Frédéric Lebon, and Noamen Guermazi. "On the Durability Performance of Two Adhesives to Be Used in Bonded Secondary Structures for Offshore Wind Installations." Materials 17, no. 10 (2024): 2392. http://dx.doi.org/10.3390/ma17102392.

Full text

Abstract:

The development of offshore wind farms requires robust bonding solutions that can withstand harsh marine conditions for the easy integration of secondary structures. This paper investigates the durability performance of two adhesives: Sikadur 30 epoxy resin and Loctite UK 1351 B25 urethane-based adhesive for use in offshore wind environments. Tensile tests on adhesive samples and accelerated aging tests were carried out under a variety of temperatures and environmental conditions, including both dry and wet conditions. The long-term effects of aging on adhesive integrity are investigated by si

APA, Harvard, Vancouver, ISO, and other styles

47

Loureiro, Mónica V., António Aguiar, Rui G. dos Santos, João C. Bordado, Isabel Pinho, and Ana C. Marques. "Design of Experiment for Optimizing Microencapsulation by the Solvent Evaporation Technique." Polymers 16, no. 1 (2023): 111. http://dx.doi.org/10.3390/polym16010111.

Full text

Abstract:

We employed microemulsion combined with the solvent evaporation technique to produce biodegradable polycaprolactone (PCL) MCs, containing encapsulated isophorone diisocyanate (IPDI), to act as crosslinkers in high-performance adhesive formulations. The MC production process was optimized by applying a design of experiment (DoE) statistical approach, aimed at decreasing the MCs’ average size. For that, three different factors were considered, namely the concentration of two emulsifiers, polyvinyl alcohol (PVA) and gum arabic (GA); and the oil-to-water phase ratio of the emulsion. The significan

APA, Harvard, Vancouver, ISO, and other styles

48

TEMIZTURK, Okan, and Kaan PEHLIVAN. "Automation of IMEI Label Attachment Process in Mobile Device Production." Eurasia Proceedings of Science Technology Engineering and Mathematics 32 (December 30, 2024): 336–41. https://doi.org/10.55549/epstem.1602806.

Full text

Abstract:

The methods of sticking labels on products produced in mass production facilities can vary greatly depending on the type of product to which the label will be attached, the size of the label and the level of adhesion of the label. The suitability and performance of the label sticking method vary greatly depending on the size of the label and especially the level of adhesion of the label. In particular, the correct selection of the method of sticking labels with low adhesion to products in mass production lines significantly affects the accuracy of the sticking process, the quality and performa

APA, Harvard, Vancouver, ISO, and other styles

49

Googarchin, Hamed Saeidi, Mohammad Hassan Shojaeefard, Mohammad Reza Gheibi, and Zohreh Sarvi. "A novel cohesive zone model to simulate ductile adhesives in automotive structure metallic joints." International Journal of Computational Physics Series 1, no. 1 (2018): 301–8. http://dx.doi.org/10.29167/a1i1p301-308.

Full text

Abstract:

In recent years, increasing utilize of the adhesively bonded joints due to its prominent features in distribution of the stress in bonded area and bonding dissimilar material has led to developing its computational aspects to provide more reliable response. In this regard, cohesive zone model (CZM) as an effective method to simulate bondline is introduced. The crucial aspect of this method is the determination of the relation between traction and separation in fracture process zone (FPZ). In fact, the traction-separation law (TSL) is a material model which must be properly obtained and applied

APA, Harvard, Vancouver, ISO, and other styles

50

Rudawska, Anna, Izabela Miturska-Barańska, Elżbieta Doluk, and Ewa Olewnik-Kruszkowska. "Assessment of Surface Treatment Degree of Steel Sheets in the Bonding Process." Materials 15, no. 15 (2022): 5158. http://dx.doi.org/10.3390/ma15155158.

Full text

Abstract:

The aim of the paper is to determine the influence of the surface treatment on the adhesive properties of steel sheet surfaces and the strength of the adhesive joints of steel sheets. The paper also aims to assess the degree of steel sheets’ surface treatment in the bonding process. Due to the many methods of surface treatment and types of materials, the assessment of the surface treatment method is extremely important in adhesive processes. Two variants of the surface treatment were used: without a paint coating and with a paint coating, divided into two groups (without degreasing and with de

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!