Log in

Relevant bibliographies by topics / Adhesive technology / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Adhesive technology.

Dissertations / Theses on the topic 'Adhesive technology'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Adhesive technology.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

May, Mousa. "The use of sol-gel technology for adhesive and structural durability applications." Thesis, Sheffield Hallam University, 2010. http://shura.shu.ac.uk/20029/.

Full text

Abstract:

The use of adhesives for joining metallic and non-metallic substrates is widely accepted in various structural engineering applications, such as aerospace, automobiles. In order to meet the industry requirements, the ability to achieve good mechanical properties under a wide variety of conditions should be considered. A major advantage of adhesive bonding over conventional mechanical fastening such as bolts and rivets is that it enables dissimilar materials to be joined. However, these materials (i.e. cured epoxy resins) are brittle and have poor resistance to cracks which indicate low capabil

APA, Harvard, Vancouver, ISO, and other styles

2

Mallick, Vishal. "Stress analysis of metal/CFRP adhesive joints subjected to the effects of thermal stress." Thesis, University of Bristol, 1989. http://hdl.handle.net/1983/4b861d50-c290-4ea9-a3ac-94d9b39dfaa6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Cope, Alexander Randon. "Solid State Pre-Formed Electronics Adhesive (SPEA)." PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/1842.

Full text

Abstract:

In mobile and handheld consumer electronic markets, product use conditions drive the requirement for mechanical strength and device durability. The majority of relatively large form factor electronic components in a laptop, mobile internet device, PDA, or mobile phone use an adhesive as a stiffener to help protect the component from physical stresses imposed by daily wear and tear. Described herein is an innovative solution referred to as Solid State Pre-Formed Electronics Adhesive (SPEA), which enables a decrease in circuit board manufacturing throughput time while increasing mechanical durab

APA, Harvard, Vancouver, ISO, and other styles

4

Chen, Bingan. "Carbon nanotubes for adhesive, interconnect, and energy storage applications." Thesis, University of Cambridge, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.648440.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Andersson, Viktor, and Andreas Larsson. "Project ABSS : Adhesive bonding of stainless steels." Thesis, Högskolan i Skövde, Institutionen för ingenjörsvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-13707.

Full text

Abstract:

This report aims to increase the scientific knowledge about long-term prospects for the adhesive and adhesive joints for bonding of stainless steels. The effects of water, temperature and chemicals on the adhesive and adhesive joints are investigated. Stainless steel plates are pretreated with a primer and isopropanol, there after joined together with single lap modeling. The strength of the joint is tested with a tensile test and additionally a watertightness test is performed to determine if the joints are watertight. For this project three versions of stainless steels is used and two differ

APA, Harvard, Vancouver, ISO, and other styles

6

MARCHIONE, FRANCESCO. "Application of adhesive joints on a tensegrity floor: verification of technology and mechanical performance." Doctoral thesis, Università Politecnica delle Marche, 2022. http://hdl.handle.net/11566/294871.

Full text

Abstract:

Il lavoro svolto ha avuto come obiettivo la verifica l’applicabilità della tecnologia adesiva su componenti edilizi innovativi. L’impiego degli adesivi strutturali rappresenta la traduzione costruttiva del principio della “semplificazione tecnologica”, ovvero della possibilità di realizzare prodotti industrializzabili con elevate prestazioni ed un numero limitato di componenti, riducendo le emissioni ambientali nelle loro fasi di vita. In particolare, è stata verificata la fattibilità tecnico-costruttiva di un solaio tensegrale in acciaio e vetro, sviluppando l’idea brevettuale del brevetto n.

APA, Harvard, Vancouver, ISO, and other styles

7

Borgede, Fabian. "TOOL DEVELOPMENT FOR HIGH RATE ADHESIVE BONDING OF AIRCRAFT CARGO DOORS." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-70195.

Full text

Abstract:

The project aimed to develop a new production tool for cargo doors to single aisle airplanes using adhesive bonding as the method to join the different parts of the structure of the door. The tooling is required to support the structure of the door and create an equal pressure distribution during the adhesive curing process in the autoclave. It was performed in close collaboration with SAAB’s efforts in Clean Sky 2 where a cargo door for tomorrow’s commercial airplane was designed and developed. The door is manufactured with chromate free adhesive bonding. The tool developed enabled the high p

APA, Harvard, Vancouver, ISO, and other styles

8

Ekstrand, Johan. "Enhancement of Phenol Formaldehyde Adhesive with Crystalline Nano Cellulose." Thesis, Linnéuniversitetet, Institutionen för skog och träteknik (SOT), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-85468.

Full text

Abstract:

Abstract The wood industries to this day use almost exclusively petroleum derived adhesives that are based mainly on the reaction of formaldehyde with urea, melamine or phenol. These adhesives have low cost and good adjustable properties which makes it hard for bio-based alternatives to compete. Phenol formaldehyde (PF), as an example of a synthetic adhesive, has been in use for over 100 years. In some parts of the world, legislation around formaldehyde is changing, and there is an increasingly voluntary awareness about the toxicity and unsustainability of formaldehyde. Industries realize that

APA, Harvard, Vancouver, ISO, and other styles

9

Fanni, Saman, and Fadi Jweda. "Design of carbon fibre composite driveshaft end fittings and adhesive joint for motorsport applications." Thesis, KTH, Hållfasthetslära, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-195648.

Full text

Abstract:

varje ände för applikationer inom motorsport. En ”Single lap” och en ”Double lap” limfogsdesign testades experimentellt i vridning. Designparametrar såsom limtjocklek, limlängd, limbredd, limmets ändgeometri, materialstyvhet och spänningsreduktion hos limfogen undersöktes och en förbättrad limfogsdesign föreslogs. Testproven höll designkriteriats last men gick inte till brott även under testutrustningens maxlast. Vidare beräkningar utfördes med antaganden baserade på ideala förhållanden och resultat från tidigare studier. Beräkningarna visade en betydlig viktminskning följande substitutionen a

APA, Harvard, Vancouver, ISO, and other styles

10

Martinez, Lopez Claudia. "Elemental Analysis of Adhesive Tapes by Laser-Based Methods." FIU Digital Commons, 2018. https://digitalcommons.fiu.edu/etd/3862.

Full text

Abstract:

Adhesive tapes are a common type of evidence involved in violent crimes and national security threats. This research evaluated the utility of LA-ICP-MS and LIBS for the characterization of the trace elemental signature in adhesive tapes for forensic comparisons. LA-ICP-MS and LIBS methods were developed, for the first time, for the qualitative and quantitative analysis of adhesive tapes. The backings of 90 black electrical tapes, previously characterized by conventional techniques (physical examination, IR, Py-GC-MS, and SEM-EDS), were analyzed by LA-ICP-MS to evaluate the ability of the techn

APA, Harvard, Vancouver, ISO, and other styles

11

Lundgren, Eric Charles. "Durable Sandwich Structure Joining Technology for NASA's Ares V Launch Vehicle." Thesis, Virginia Tech, 2010. http://hdl.handle.net/10919/79693.

Full text

Abstract:

Joining of uniformly-curved composite sandwich panel segments, typical in state of the art aerospace launch vehicles, should be mass-efficient. Adhesively bonded joints can provide increased mass-efficiency over mechanically-fastened joints. But, due to manufacturing sensitivities and certification requirements, conventional bonded joints can be improved upon by introducing structural redundancy. A longitudinal, durable redundant joint (DRJ) architecture featuring multiple adhesive load-paths, via a novel composite preform insert, was proposed to join composite sandwich panel segments of the i

APA, Harvard, Vancouver, ISO, and other styles

12

Khan, Sadia Arefin. "Electromigration analysis of high current carrying adhesive-based copper-to-copper interconnections." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/44885.

Full text

Abstract:

"More Than Moore's Law" is the driving principle for the electronic packaging industry. This principle focuses on system integration instead of transistor density in order to achieve faster, thinner, and smarter electronic devices at a low cost. A core area of electronics packaging is interconnection technology, which enables ultra-miniaturization and high functional density. Solder bump technology is one of the original, and most common interconnection methods for flip chips. With growing demand for finer pitch and higher number of I/Os, solder bumps have been forced to smaller dimensions and

APA, Harvard, Vancouver, ISO, and other styles

13

Oliva, Jorge Nuria. "Localized and disease-selective drug delivery using adhesive hydrogels for treatment of locally advanced TNBC." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/104611.

Full text

Abstract:

Thesis: Ph. D., Harvard-MIT Program in Health Sciences and Technology, 2016.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 111-117).<br>Triple negative breast cancer (TNBC) is an aggressive form of cancer that represents 20% of invasive breast cancers, and about 15% are locally advanced at time of presentation. TNBC is negative for estrogen and progesterone receptor, as well as for HER2, and hence it is not treatable with common endocrine treatment such as tamoxifen or Herceptin. Systemic neoadjuvant therapy has been established as the preferred therape

APA, Harvard, Vancouver, ISO, and other styles

14

Trieb, Alicia, and Jennie Lönnesjö. "Lim i skor : Vattenbaserade lim som ett mindre riskfyllt alternativ till lösningsbaserade lim." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-23492.

Full text

Abstract:

NilsonGroup presenterade uppdraget att undersöka vattenbaserade lim som alternativ till lösningsbaserade lim vid tillverkning av skor, vilket var grunden till det här arbetets ämne och avgränsningar har tagits fram. Vattenbaserade lim är ett alternativ till lösningsbaserade lim som inte är lika hälsofarligt, då lösningsmedelkan orsaka allvarliga hälsoeffekter. Enligt NilsonGroup ligger skobranschen steget efter vad det gäller hållbarhet och i nuläget saknas det en satsning på hållbarutveckling, medan andra branscher är bättre på att leta efter nya möjligheter. Det här arbetet vill lyfta fram p

APA, Harvard, Vancouver, ISO, and other styles

15

Jofre-Reche, José Antonio. "Optimization of the surface properties of polydimethylsiloxane by plasma treatment for adhesion improvement and durability to acrylic adhesive for medical applications." Doctoral thesis, Universidad de Alicante, 2014. http://hdl.handle.net/10045/86114.

Full text

Abstract:

El polidimetilsiloxano (PDMS) es un polímero amorfo en base inorgánica con grupos pendientes que le imparten hidrofobicidad que es ampliamente utilidado en aplicaciones biomédicas. Debido a la baja energía superficial del PDMS, su adhesión es pobre. En algunas aplicaciones biomédicas (catéteres, prótesis) se requiere adhesión para lo cual se modifica superficialmente. Los plasmas generados en condiciones de no-equilibrio, también llamados plasmas fríos, han sido utilizados en el tratamiento superficial de PDMS para aumentar su energía superficial, pero las modificaciones producidas son poco es

APA, Harvard, Vancouver, ISO, and other styles

16

Bryant, Daniel T. J. "The development of room temperature transparent conductive adhesive-laminate technology and its use in flexible opto-electronic devices." Thesis, Swansea University, 2014. https://cronfa.swan.ac.uk/Record/cronfa42935.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Dobrzanska, Dorota A. "Using bio-adhesive and bio-inert surfaces to maximize biogas production and influence microbial growth in anaerobic digesters." Thesis, University of Warwick, 2014. http://wrap.warwick.ac.uk/66487/.

Full text

Abstract:

The optimisation of biogas digesters is crucial for further development of sustainable energy sources. In this research, an integrative approach was taken to understanding how this problem can be addressed including: seeking a better understanding of protein – surface interactions on the molecular level; larger scale experiments to screen the best materials for use in laboratory scale anaerobic digesters to influence microbial growth and biofilm development as well as analysis of farm-scale data using the ADM1 multiparameter model. The laboratory-scale experiments were undertaken to develop su

APA, Harvard, Vancouver, ISO, and other styles

18

Ramkumar, S. Manian. "Process analysis and performance characterization of a novel anisotropic conductive adhesive for lead-free surface mount electronics assembly." Diss., Online access via UMI:, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

19

Сагунова, К. И. "Исследование особенностей применения адгезивных систем при восстановлении зубов". Thesis, Сумский государственный университет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/48304.

Full text

Abstract:

Адгезивные технологии восстановления зубов предполагают соответствующую подготовку твердых тканей с использованием протравливающих компонентов и адгезивных систем. Цель – изучение краевого прилегания нанофотокомпозитного материала к твердым тканям зубов по микропроницаемости в условиях применения различных адгезивных систем.

APA, Harvard, Vancouver, ISO, and other styles

20

Wilhelmsson, Sebastian, and Joel Ågren. "Evaluation of the mechanical properties of structural adhesives cured under different environmental conditions." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-25567.

Full text

Abstract:

Today, structural adhesives are found extensively in load-bearing engineering applications, as their use can be advantageous compared to other fastening methods. However, the characteristics of adhesives are far more complex, making it challenging to predict their behavior in different service conditions. In addition, environmental factors like temperature and water can affect the performance of an adhesive bond both physically and chemically. This work was initiated by MuoviTech AB and aims to evaluate the performance of structural methyl methacrylate adhesives cured in different environmenta

APA, Harvard, Vancouver, ISO, and other styles

21

Firoz, Safdari, and Woldegiorgis Yonas. "Sökande efter radiovågor från skärzonen vid svarvning." Thesis, Högskolan i Gävle, Avdelningen för industriell ekonomi, industridesign och maskinteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-36205.

Full text

Abstract:

Adhesive wear occurs when small surfaces of the cutting tool due to friction are micro-welded to the chips and removed from the tool surface. A hypothesis as to whywelding occurs is that an electric potential field arises which initiates a chemical reaction and then welding of the work material and the tool takes place in the cuttingzone. The electric potential field results in a fluttering magnetic field, which in turngenerates electromagnetic issues. The waves should be around and above 1 MHz.The aim of this work is thus to investigate the presence of electromagnetic wavesfrom the cutting zo

APA, Harvard, Vancouver, ISO, and other styles

22

Najem, Johnny F. "Gecko-Inspired Electrospun Flexible Fiber Arrays for Adhesion." University of Akron / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=akron1340465711.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Modenese, Chiara. "Numerical study of the mechanical properties of lunar soil by the discrete element method." Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:c8908ef8-9652-4e8d-9b2f-49770f3ce815.

Full text

Abstract:

Lunar soil, defined as the finest part of the lunar regolith which covers the entire surface of the Moon, has shown to have remarkable shear strength properties, highlighted by the clearly visible effects of soil cohesion. The main objective of this thesis is to unveil the physical explanations causing this unusual soil behaviour in a waterless, airless, lunar environment. Ultra-High Vacuum (UHV), in particular, is considered responsible for increasing the strength of surface energy forces due to lunar soil outgassing. In turn, the presence of surface energy forces, arising from van der Waals

APA, Harvard, Vancouver, ISO, and other styles

24

LINDSTRÖM, KATARINA. "Bicomponent Fiber in Sound Absorbent Production : Investigation of using bicomponent fiber as adhesive between woven and nonwoven textile and how it affects the sound absorption." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-18018.

Full text

Abstract:

A new way of adhering woven textile to a nonwoven backing was explored, the end product in mind being a sound absorbent panel. Today a hot melt adhesive is sprayed on the nonwoven with woven decorating textile put on top before compression molding. This method results in an uneven layer of adhesive with the consequence of decorating textile detaching from the nonwoven and thereby a high number of discarded products. The report investigates the possibility of using a bicomponent fiber as the adhesive. This would guarantee an even layer of adhesive and make the manufacturing process one step sho

APA, Harvard, Vancouver, ISO, and other styles

25

MAGGIORE, SOFIA. "Studio e caratterizzazione di sistemi adesivi polimerici da utilizzare in processi di giunzione innovativi." Doctoral thesis, Università degli studi di Genova, 2022. http://hdl.handle.net/11567/1073669.

Full text

Abstract:

This study was dealt with the development of polymeric adhesive systems to be used in innovative junction processes based on friction stir welding (FSW) technology, and in particular on the hybrid technique FSW-bonding, for joining elements composed of metal alloys. The addition of suitable additives, such as inorganic fillers, to the most promising formulations was aimed at obtaining materials not only leading to a stronger adhesion between the phases, but also characterized by improved thermal properties and good resistance to oxidation and chemical attacks. Furthermore, due to their relevan

APA, Harvard, Vancouver, ISO, and other styles

26

Mehrotra, Gaurav. "Ultra thin ultrafine-pitch chip-package interconnections for embedded chip last approach." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22594.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Samel, Björn. "Novel Microfluidic Devices Based on a Thermally Responsive PDMS Composite." Doctoral thesis, KTH, Mikrosystemteknik, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4470.

Full text

Abstract:

The field of micro total analysis systems (μTAS) aims at developments toward miniaturized and fully integrated lab-on-a-chip systems for applications, such as drug screening, drug delivery, cellular assays, protein analysis, genomic analysis and handheld point-of-care diagnostics. Such systems offer to dramatically reduce liquid sample and reagent quantities, increase sensitivity as well as speed of analysis and facilitate portable systems via the integration of components such as pumps, valves, mixers, separation units, reactors and detectors. Precise microfluidic control for such systems has

APA, Harvard, Vancouver, ISO, and other styles

28

Aguedo, Ana Catarina Laly. "Dynamically Adhesive Micropatterned Substrates for Studying and Controlling Cell Adhesion and Migration." Dissertação, 2015. https://repositorio-aberto.up.pt/handle/10216/88989.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Aguedo, Ana Catarina Laly. "Dynamically Adhesive Micropatterned Substrates for Studying and Controlling Cell Adhesion and Migration." Master's thesis, 2015. https://repositorio-aberto.up.pt/handle/10216/88989.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Chen, Wei-Liang, and 陳偉亮. "Investigations on the Anisotropically Conductive Adhesive for Flip-Chip Technology." Thesis, 2000. http://ndltd.ncl.edu.tw/handle/95566415443611010109.

Full text

Abstract:

碩士<br>國立成功大學<br>材料科學及工程學系<br>88<br>This work focus on the process of flip-chip technology using anisotropically conductive adhesive(ACA). A water pump was applied to produce a flux remove the bubble and thus obtain a smooth electroless deposition. ACA material has been investigated by scanning electronic microscopy(SEM). Energy dispersive spectroscopy(EDS) analysis reveals that ACA consists of nickel particle and spherical silica particle. It was found that 5 Vol% nickel particle and more than 70 Vol% silica are dispered in epoxy matrix. Silica can improve the characteristic of CET

APA, Harvard, Vancouver, ISO, and other styles

31

WANG, CHIH-CHENG, and 王稚程. "Research on Thinning Technology of Adhesive Coating In A Package." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/234xmc.

Full text

Abstract:

碩士<br>國立高雄應用科技大學<br>模具系碩士在職專班<br>106<br>Along with the evolution of various 3C products in the market towards light, thin, short, and small, the product modules must be able to carry multi-functional and small-sized designs. Therefore, in the IC packages or other electronic component modules that are more and more difficult process points in production technology. Miniaturization technology has become one of the leading topics for research and development in the technology industry and one of the leading indicators of technology. Nowadays, packaging industry in the miniaturization of modules,

APA, Harvard, Vancouver, ISO, and other styles

32

Viana, Guilherme Miranda Silva de Oliveira. "Functionally Graded Adhesive Patch Repairs in Civil Applications." Dissertação, 2013. https://repositorio-aberto.up.pt/handle/10216/68608.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Varajão, Joana Filipa Dias. "Impact of CFRP adhesive joints for the automotive industry." Dissertação, 2015. https://repositorio-aberto.up.pt/handle/10216/79488.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Silva, Mário Rui Gonçalves da. "Impact of mixed adhesive joints for the automotive industry." Dissertação, 2015. https://repositorio-aberto.up.pt/handle/10216/79419.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Viana, Guilherme Miranda Silva de Oliveira. "Functionally Graded Adhesive Patch Repairs in Civil Applications." Master's thesis, 2013. https://repositorio-aberto.up.pt/handle/10216/68608.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Ribeiro, António Pedro Fernandes Mota de Sousa. "Validation of an adhesive bonded connection." Master's thesis, 2021. https://hdl.handle.net/10216/135129.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Ribeiro, António Pedro Fernandes Mota de Sousa. "Validation of an adhesive bonded connection." Dissertação, 2021. https://hdl.handle.net/10216/135129.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Silva, Mário Rui Gonçalves da. "Impact of mixed adhesive joints for the automotive industry." Master's thesis, 2015. https://repositorio-aberto.up.pt/handle/10216/79419.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Varajão, Joana Filipa Dias. "Impact of CFRP adhesive joints for the automotive industry." Master's thesis, 2015. https://repositorio-aberto.up.pt/handle/10216/79488.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Lin, Geng-Hong, and 林耿弘. "Development of the Flexible Polymer-Based Capacitive Micromachined Ultrasound Transducer using Adhesive Technology." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/47505001930977063047.

Full text

Abstract:

碩士<br>國立高雄應用科技大學<br>機械與精密工程研究所<br>98<br>In this research the adhesive technique is used to fabricate the flexible polymer-based capacitive micromachined ultrasonic transducer (CMUT). Because polymer-based CMUT can be made at low temperature and low cost it has wider applications comparing to high temperature and high cost of silicon-based counterpart. This fabrication method replaces the earlier sacrificial layer method of our group and it can reduce the number of processes with better yield. Each CMUT is designed with 472 hexagonal membranes, with the overall size of 3mm x 4mm. Each cell has

APA, Harvard, Vancouver, ISO, and other styles

41

Costa, Marcelo Bruno Serrão Fontes Parente da. "Development of a Web Application for the Design of Adhesive Joints." Dissertação, 2013. https://repositorio-aberto.up.pt/handle/10216/67629.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Rodrigues, Ricardo Brandão. "Experimental and numerical study of contaminated adhesive joints." Master's thesis, 2021. https://hdl.handle.net/10216/136094.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Araújo, Hélder André Moreira. "Impact and Damping Behaviour of Composite Adhesive Joints." Master's thesis, 2016. https://repositorio-aberto.up.pt/handle/10216/85393.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Marques, Eduardo André de Sousa. "High temperature mixed-adhesive joints for aerospace applications." Doctoral thesis, 2016. https://repositorio-aberto.up.pt/handle/10216/83364.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Sadek, Seifallah Hassan Mahmoud. "Aluminum foam sandwick with adhesive bonding: computational modelling." Master's thesis, 2016. https://repositorio-aberto.up.pt/handle/10216/83737.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Araújo, Hélder André Moreira. "Impact and Damping Behaviour of Composite Adhesive Joints." Dissertação, 2016. https://repositorio-aberto.up.pt/handle/10216/85393.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Sadek, Seifallah Hassan Mahmoud. "Aluminum foam sandwick with adhesive bonding: computational modelling." Dissertação, 2016. https://repositorio-aberto.up.pt/handle/10216/83737.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Marques, Eduardo André de Sousa. "High temperature mixed-adhesive joints for aerospace applications." Tese, 2016. https://repositorio-aberto.up.pt/handle/10216/83364.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Costa, Marcelo Bruno Serrão Fontes Parente da. "Development of a Web Application for the Design of Adhesive Joints." Master's thesis, 2013. https://repositorio-aberto.up.pt/handle/10216/67629.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Rodrigues, Tânia Alexandra Ferreira. "Determination of the fracture envelope of an adhesive joint as a function moisture." Dissertação, 2015. https://repositorio-aberto.up.pt/handle/10216/79407.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!