Relevant bibliographies by topics / Aditivní výroba

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Aditivní výroba'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aditivní výroba.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aditivní výroba"

1

Harašta, Jakub. "Overview of the Foreign Experience of the Influence of Additive Manufacturing on Development and Deployment of Military Technology." Vojenské rozhledy 24, no. 2 (May 11, 2015): 64–71. http://dx.doi.org/10.3849/1210-3292.24.2015.02.064-071.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Aditivní výroba"

1

Křivohlavý, Petr. "Aditivní výroba prostorových prutů z polymerních materiálů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442803.

Full text
Abstract:
This thesis is focused on creating polymer lattice struts without any necessary support in full length using robotic 3D printing. The aim of the thesis is to find suitable process parameters and printing strategies with respect to the accuracy of the polymer struts. A statistical model of effects of individual process parameters has been produced to achieve stated objectives. The model enables finding optimal process parameters. The printing strategies for thus established process parameters are tested to increase the accuracy of the finished print and the quality of the bonds between individual struts. The accuracy assessment is executed using optical 3D metrology. The maximum deviation from the nominal shape 0.54mm has been accomplished using discovered process parameters and printing strategies.
APA, Harvard, Vancouver, ISO, and other styles
2

Mandáková, Adéla. "Design klimatizační jednotky pro aditivní robotickou výrobu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445151.

Full text
Abstract:
The design of air conditioning unit is based on combination of the product itself and related architecture. The large-scale 3D printing is becoming more and more popular, that is why this thesis chose additive manufacturing robotic technology for designing the air conditioner. According to analysis the air distribution through perforations is the most convenient one for an indoor unit. An outdoor unit tends to be hidden because of inhomogeneity with the building. To obtain more variant studies for the design a generative process was applied. This method was applied also later on, because additive manufacturing is able to easily change dimension parameters and thus fulfil individual customer requests. Other advantages of robotic printing are the lattice structures that enable perforation manufacturing without waste and the possibility of using generative design methods.
APA, Harvard, Vancouver, ISO, and other styles
3

Pospíšil, Jan. "Výroba dílů s odlehčenou strukturou a topologickou optimalizací." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417569.

Full text
Abstract:
This thesis deals vith the design of welding torch holder using topology optimization and lattice structure. The objective of this thesis is gaining knowledge about topology optimization in different software and aplication of methods to that part. Conclusion of this thesis is about production design and economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
4

Nakládalová, Tereza. "Konstrukční optimalizace výrobní linky využitím aditivní technologie SLS." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382472.

Full text
Abstract:
This diploma thesis is focused on additive manufacturing, especially on technology Selective Laser Sintering (SLS) and the implementation of additive manufacturing into existing departments of industry, where current elements of systems are supplemented or directly replaced by new parts produced by these technologies. This thesis solves specific project of manipulation unit for manufacturing line. The main goals of the issue are analysis of current construction design and its deficiency, designing and optimalization of this unit in relation to SLS manufacturing technology, product realization and final evaluating of reached results. Part of the thesis is also design documentation.
APA, Harvard, Vancouver, ISO, and other styles
5

Valenová, Ludmila. "Optimalizace 3D tisku a post-processingu pokročilé keramiky na bázi kalcium fosfátu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442598.

Full text
Abstract:
The diploma thesis is related to the preparation of hydroxyapatite complex structures by additive manufacturing known as Lithography based ceramics manufacturing – LCM. A photosensitive suspension containing hydroxyapatite particles was used for 3D printing of ceramic complex structures. The influence of printing parameters on the resulting macrostructure, microstructure, density, and dimensional accuracy was evaluated. The aim was to obtain ceramic components without delamination of the layers and optimise following post-processing steps (cleaning and thermal treatment). It was found that the exposure time has a significant effect on the dimensional accuracy of printed parts. During observation microstructure of printed parts, a microporosity at the interface of printed layers, which can cause delamination of several layers was identified. High-temperature dilatometry showed different temperature of beginning densification process in the longitudinal and perpendicular directions to the layers. That could be an initiation mechanism for delamination of the layers. X-ray diffraction analysis determined a single-phase composition of powder in photosensitive suspension and sintered parts. A commercial product LithaSol 20 was suggested as a suitable cleaning agent and efficiency of the ultrasound field for cleaning was demonstrated. Based on the thermogravimetric analysis an optimized cycle of heat treatment was designed. The optimisation led to time saving (49 hours), while maintaining density, dimensional accuracy and macrostructure of the 3D printed structures.
APA, Harvard, Vancouver, ISO, and other styles
6

Kroutil, Tomáš. "Experimentální 3D tiskárna pro laserové sintrování plastů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318723.

Full text
Abstract:
The diploma thesis deals with design and realization of experimental 3D printer for selective laser sintering of plastic powders. The output of the work is a device that can create the main process conditions for laser sintering. A diode laser is used in the device, which allows aluminum composite powders to be processed. The printer allows you to heat up the applied layer of powder and set-up space. The research section focuses on similar equipment, process parameters, laser technology and control system. The design section contains solution variants and a description of the chosen solution.
APA, Harvard, Vancouver, ISO, and other styles
7

Měchura, Lukáš. "Vývoj procesních parametrů technologie Selective Laser Melting pro výrobu lisovací formy pneumatik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-444403.

Full text
Abstract:
The diploma thesis deals with finding suitable process parameters for the production of molding segment by SLM technology. It consists of a combination of structures, shells, thin slats and bulk parts. The tested material is maraging steel 300. The research part deals with the problem of choice of suitable process parameters, such as laser power and speed, hatch distance and thickness of the built layer. The achievable mechanical properties of the parts and the choice of the suitable structure were also examined. In the thesis were found suitable process parameters for printing of bulk parts and structures.
APA, Harvard, Vancouver, ISO, and other styles
8

Lasota, Marek. "Návrh protetického chodidla s využitím aditivních výrobních technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382165.

Full text
Abstract:
Subject of this diploma thesis is a design of a prosthetic foot for an additive manufacturing. It is a dynamic foot made of plastic, designed for an 80 kg patient with a second level of a movement aktivity. From a few concepts is chosen one, which is then optimalized and printed with a MJF method. Functional sample is then undergoing static and cyclic tests according to ISO 10328.
APA, Harvard, Vancouver, ISO, and other styles
9

Dokoupil, Filip. "Zpracování slitiny 2618 pomocí technologie selective laser melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231934.

Full text
Abstract:
This diploma thesis deals with finding and verification of appropriate technological parameters of SLM technology for the processing of aluminum alloy 2618. In the theoretical part, an introduction to additive manufacturing of aluminum alloys and general description of processes occurring during SLM production is given. Based on general knowledge were designed different types of testing samples produced by sintering the metallurgical powder using 400 W ytterbium fiber laser, which so far in the literature for aluminum alloy 2618 were not described. As the result, the technological parameters dependence on relative density and the detailed overview of the 2618 alloy processing by SLM technology is determined.
APA, Harvard, Vancouver, ISO, and other styles
10

Šafl, Pavel. "Použití technologie 3D tisku pro návrh výroby náhradních dílů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442437.

Full text
Abstract:
This seminar thesis deals with the issue of 3D printing in companies. The aim was to describe additive manufacturing and 3D printing technologies. Moreover, to select the most common materials which are used and describe them. It was also necessary to perform a study of mechanical stresses and prepare a detailed description of the mechanical properties of materials. From these data, methods of use in the automotive industry were described. The most important part was to introduce case studies and create a description of which 3D printing technologies have the fastest return on investment.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Aditivní výroba' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography