Relevant bibliographies by topics / Adsorbent surfaces

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Adsorbent surfaces'

Author: Grafiati
Published: 30 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Adsorbent surfaces.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Adsorbent surfaces"

1

Ntsondwa, Sindisiwe, Velaphi Msomi, and Moses Basitere. "The Mechanism of Adsorbents Adsorption Affinity in Relation to Geometric Parameters." Key Engineering Materials 924 (June 30, 2022): 189–97. http://dx.doi.org/10.4028/p-j52rwy.

Full text
Abstract:
In the process of incorporating adsorption with thermal desalination, adsorbents are important because they increase the water vapour uptake rate, and this would yield more desalinated water over a short period. Therefore, they are important and the key parameters in the selection of adsorbent for an adsorption desalination (AD) cycle are thermo-physical properties, surface characteristics and water vapor uptake capacity. The best adsorbent is used as the adsorbent-refrigerant pair and is driven at 50 oC to 85 oC by low-temperature heat sources. When the unsaturated adsorbent is exposed to vap
APA, Harvard, Vancouver, ISO, and other styles
2

Wu, Jiangbo, Ziyi Sui, Xiaoze Du, Yaocong Zhang, and Tao Ma. "A Study on the Improvement of the Photothermal Characteristics of the Adsorbent for Sorption-Based Atmospheric Water Harvesting Driven by Solar." Coatings 13, no. 1 (2023): 154. http://dx.doi.org/10.3390/coatings13010154.

Full text
Abstract:
Facing the global freshwater resource crisis, using solar energy to produce fresh water resources in an environmentally friendly way, sorption-based atmospheric water harvesting driven by solar technology has attracted increasingly more attention. In the current research, the adsorbent MOF-801 has the advantages of a high adsorption capacity and is suitable for fields with a wide range of humidity. However, the strong interaction between the adsorbent and water molecules is conducive to rapid moisture absorption, but at the same time, the adsorbent needs higher heat to achieve regeneration, wh
APA, Harvard, Vancouver, ISO, and other styles
3

Zou, Yong, and Alírio E. Rodrigues. "Adsorbent Materials for Carbon Dioxide." Adsorption Science & Technology 19, no. 3 (2001): 255–66. http://dx.doi.org/10.1260/0263617011494141.

Full text
Abstract:
The adsorption of carbon dioxide on adsorbent materials at high temperatures was critically reviewed. The present status of adsorbent materials for CO2 including carbon-based adsorbents, zeolites and metal oxide sorbents at high temperatures were discussed in detail. Research areas that may make a significant impact on the future development of adsorbent materials were advanced.
APA, Harvard, Vancouver, ISO, and other styles
4

Bhattacharjee, T. S., S. Ghadge, R. Khilari, et al. "Surface chemistry analysis of acidified and nickel impregnated carbon for desulfurization of fuels." IOP Conference Series: Materials Science and Engineering 1291, no. 1 (2023): 012001. http://dx.doi.org/10.1088/1757-899x/1291/1/012001.

Full text
Abstract:
Abstract Emission norms tend to reduce sulfur content in transport fuels to 10ppm. Considering this new method like adsorptive desulfurization are widely researched. The main motive in adsorptive desulfurization is to selectively adsorb Dibenzothiophene (DBT) and 4,6-DimethylDBT. Considering this adsorbent with nickel impregnation and acidic surface functionalities were developed. Topographical and surface chemical features were studied of developed carbon adsorbents. Presence of carboxylic surface functionalities and reduced solid nickel was confirmed on adsorbents surfaces. In addition to th
APA, Harvard, Vancouver, ISO, and other styles
5

Lv, Yao, Jiangbo Wu, Jiewen Dong, and Tingwei Jia. "A Study of Hygroscopicity Improvements to Adsorbents in Solar-Powered Air Water Extraction." Coatings 14, no. 4 (2024): 472. http://dx.doi.org/10.3390/coatings14040472.

Full text
Abstract:
As a global freshwater shortage is imminent, solar-powered adsorption-based atmospheric water harvesting technology is gradually attracting people’s attention due to its environmental friendliness and many other advantages. Among the many adsorbents used in this technology, MOF-801 has a large adsorption capacity in a wide range of humidity. In the current field, carbon materials are usually added to improve the photothermal properties of MOF-801, but hybrid adsorbents made in this way usually weaken the adsorption performance of MOF-801. If the MOF-801/carbon material adsorbent is used as a b
APA, Harvard, Vancouver, ISO, and other styles
6

Hawraa K. Al-Husseini. "Adsorption Of Clomid Drug On Activated Carbon And Zinc Oxide Surfaces." Journal of the College of Basic Education 21, no. 88 (2023): 37–48. http://dx.doi.org/10.35950/cbej.v21i88.9951.

Full text
Abstract:
The research included study the adsorption of Clomid drug on the
 surface of activated carbon and zinc oxide. Many of parameters were
 studied which affect the adsorption process such as temperature, weight of
 adsorbent, equilibrium time, initial concentration and effect of pH.
 Activated carbon and zinc oxide were used as a model adsorbent in the
 experiments. We found that increased of temperature (30-50) °C followed
 by increased in adsorption capacity experiments were done at 30 °C and
 showed that the optimum weight of activated carbon was (0.15 g) whil
APA, Harvard, Vancouver, ISO, and other styles
7

Pereyra, Neysa, Urooj Kamran, Wilson Aguilar-Mamani, and Farid Akhtar. "Conversion of Glass Waste into Zeolite A Adsorbent for Efficient Ammonium Ion Adsorption from Aqueous Solution: Kinetic and Isotherm Studies." Processes 13, no. 3 (2025): 678. https://doi.org/10.3390/pr13030678.

Full text
Abstract:
In this study, a zeolitic adsorbent (AGW-ZA) was successfully developed from glass waste (GW)-derived aluminosilicates. The GW, serving as the starting material, underwent alkaline activation and hydrothermal treatment to yield the AGW-ZA adsorbent, which exhibited a surface area of 216.48 m2/g. The AGW-ZA demonstrated significantly higher ammonium (NH4+) ion adsorption (142.5 mg/g at 1000 mg/L) than pristine GW (80.0 mg/g). Optimal adsorption experimental parameters were identified (0.1 g dosage, pH = 7, and 10 h contact time) to determine the maximum NH4+ ions’ adsorption potential by adsorb
APA, Harvard, Vancouver, ISO, and other styles
8

Cornejo, J., R. Celis, I. Pavlovic, and M. A. Ulibarri. "Interactions of pesticides with clays and layered double hydroxides: a review." Clay Minerals 43, no. 2 (2008): 155–75. http://dx.doi.org/10.1180/claymin.2008.043.2.01.

Full text
Abstract:
AbstractThe increasing presence of pesticides in natural ecosystems has stimulated research to look for improved adsorbent materials which can be used to remediate and prevent soil and water contamination by these compounds. Among the different materials that have been assayed as adsorbents of pesticides are natural clay minerals, particularly 2:1 phyllosilicates and their structurally complementary synthetic analogues layered double hydroxides (LDHs). The great interest in natural clays and LDHs as adsorbent materials is mainly related to the large specific surface areas associated with their
APA, Harvard, Vancouver, ISO, and other styles
9

Schwantes, Daniel, Affonso Celso Gonçalves Junior, Henrique Alipio Perina, et al. "Ecofriendly Biosorbents Produced from Cassava Solid Wastes: Sustainable Technology for the Removal of Cd2+, Pb2+, and Crtotal." Adsorption Science & Technology 2022 (March 9, 2022): 1–18. http://dx.doi.org/10.1155/2022/5935712.

Full text
Abstract:
This research is aimed at investigating the possible use of cassava agroindustry solid wastes in manufacturing adsorbents and their use in removing heavy metals Cd2+, Pb2+, and Crtotal from water. Thus, a pilot study was conducted in two main steps: (1) obtaining and characterizing the adsorbents and (2) laboratory studies focused on the evaluation of critical physicochemical parameters on adsorption, such as pH of the solution containing heavy metals, the effect of adsorbent dose, besides kinetics and equilibrium adsorption and desorption studies. Three adsorbents were studied, cassava barks,
APA, Harvard, Vancouver, ISO, and other styles
10

Cho, Young-Sang, Sol Jeong, and Soyoung Nam. "Synthesis of Porous Silica Particles for the Adsorption of Organic Dye in Aqueous Medium." Korean Journal of Metals and Materials 58, no. 5 (2020): 304–18. http://dx.doi.org/10.3365/kjmm.2020.58.5.304.

Full text
Abstract:
This study investigated the removal of the organic dye like methylene blue using porous particles in a batch adsorption process. Porous silica microparticles were synthesized with macropores or meso-macropores and used as adsorbent particles. The hierarchically porous structures with additional mesopores were found to be more effective adsorbent than simple macroporous particles. The size of the macropores affected the adsorption capacity of the porous particles, and smaller pore size resulted in a larger amount of organic dye being adsorbed on the particle surface, due to increased surface ar
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Adsorbent surfaces"

1

BOURDIN, JEAN-PIERRE. "Contribution a l'etude de la structure electronique et des proprietes d'adsorption des surfaces des metaux de transition." Nantes, 1987. http://www.theses.fr/1987NANT2024.

Full text
Abstract:
Etude dans l'approximation des liaisons fortes et de la methode des moments de la structure electronique et des proprietes d'adsorption de plusieurs types de surfaces de metaux de transition. Application a l'etude de la reconstruction de la surface (110) du tungstene. Interpretation du comportement surprenant des dimeres de la troisieme serie des metaux de transition sur la surface w (110) en prenant en compte les effets des correlations electroniques. Influence de la presence de marches sur les proprietes d'adsorption d'une surface d'un metal de transition
APA, Harvard, Vancouver, ISO, and other styles
2

van, Rensburg Wilma. "Characterization of natural antimicrobial peptides adsorbed to different matrices." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/97929.

Full text
Abstract:
Thesis (MSc)--Stellenbosch University, 2015.<br>ENGLISH ABSTRACT: Biofouling is the attachment and biofilm formation that leads to negative repercussions such as persistent post-harvest infections, infections obtained from medical implants and continual surface contamination of food processing plants. Much of the problem lies with the resistance that develops against conventional treatments due to the formation of mature biofilms. Thus the focus has shifted from the removal of biofilms to the prevention of initial attachment of organisms. This entails the use of antimicrobial surfaces tha
APA, Harvard, Vancouver, ISO, and other styles
3

Tidwell, Caren Diana. "Endothelial cell interactions with model surfaces : effect of surface chemistry, surface mobility, and the adsorbed protein layer /." Thesis, Connect to this title online; UW restricted, 1999. http://hdl.handle.net/1773/8004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Xieqiu. "Scanning tunneling microscopy study : from clean surface to surfaces adsorbed with atom/cluster or metallic island /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?PHYS%202007%20ZHANG.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mo, Haiding. "Neutron and x-ray scattering study of intermediate-length alkane films adsorbed on solid surfaces /." free to MU campus, to others for purchase, 2004. http://wwwlib.umi.com/cr/mo/fullcit?p3144441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Eggeling, Joachim. "Inelastic electron scattering from adsorbate covered semiconductor surfaces." Thesis, Imperial College London, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313773.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Binti, Mohd Firdaus Achutan Rabita. "Graphène chimiquement modifié et auto-assemblé comme adsorbant pour des applications en environnement." Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0275.

Full text
Abstract:
Le graphène idéal est une couche d'épaisseur atomique composé exclusivement d'atomes de carbone hybridés sp². En outre, le graphène peut également être vu sous d'autres formes dites dérivés du graphène, y compris l'oxyde de graphène (GO) et l'oxyde de graphène réduit (rGO). Notre étude a démontré que le GO peut être utilisé comme matériau de départ et être activé chimiquement et physiquement pour être utilisé comme adsorbant pour la capture du CO₂. De plus, des matériaux à base de graphène tridimensionnels (3D) ont récemment suscité beaucoup d'intérêt en raison de leur capacité à préserver les
APA, Harvard, Vancouver, ISO, and other styles
8

Gay, Simon Christopher Anthony. "Theoretical studies of adsorbate covered semiconductor surfaces." Thesis, University of Exeter, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.302534.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Markkula, Tommi. "Surface characterisation of gas plasma modified PET and PTFE : effect of surface chemistry on cell attachment." Thesis, University of Liverpool, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.275047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Razafitianamaharavo, Angelina. "Étude structurale du film de cyclohexane physisorbé sur graphite : Étude thermodynamique et structurale du film mixte (krypton-cyclohexane) physisorbe sur graphite." Nancy 1, 1989. http://www.theses.fr/1989NAN10080.

Full text
Abstract:
La caractérisation structurale du cyclohexane adsorbe sur graphite a été effectuée entre 77**(O)K et 260**(O)K par diffraction de neutrons et de rayons X. Elle a permis de proposer un diagramme de phases 2D rendant compte de trois structures solides qui sont par ordre de densité croissante, commensurable, hexagonale incommensurable et rectangulaire centrée
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Adsorbent surfaces"

1

Bonzel, H. P., ed. Adsorbed Layers on Surfaces. Springer-Verlag, 2005. http://dx.doi.org/10.1007/b12050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bonzel, A. P., ed. Adsorbed Layers on Surfaces. Springer-Verlag, 2003. http://dx.doi.org/10.1007/b82990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bonzel, A. P., ed. Adsorbed Layers on Surfaces. Part 1: Adsorption on Surfaces and Surface Diffusion of Adsorbates. Springer-Verlag, 2001. http://dx.doi.org/10.1007/b71466.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bonzel, A. P., ed. Adsorbed Layers on Surfaces. Part 2: Measuring Techniques and Surface Properties Changed by Adsorption. Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/b79071.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ferreira, L. F. Vieira. Photophysics of cyanine dyes adsorbed onto surfaces. Rutherford Appleton Laboratory, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bateman, J. E. Infrared spectroscopy of adsorbed species on metal surfaces. University of East Anglia, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lennon, David. Spectroscopic studies of adsorbed species on metal surfaces. University of East Anglia, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Saoud, Younes Hashem. Vibrational sprectroscopic studies of adsorbed species on metal surfaces. University of East Anglia, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gardner, Peter. Vibrational spectroscopic studies of adsorbed species on metal surfaces. University of East Anglia, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Raval, Rasmita. Vibrational spectroscopic studies of adsorbed species on single crystal surfaces. University of East Anglia, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Adsorbent surfaces"

1

Christensen, Thomas M. "Adsorbed Atoms on Surfaces." In Understanding Surface and Thin Film Science. CRC Press, 2022. http://dx.doi.org/10.1201/9780429194542-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Song, Shaoxian, Weijun Peng, and Hongqiang Li. "Surface Chemistry of Mineral Adsorbents." In Adsorption at Natural Minerals/Water Interfaces. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-54451-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhdanov, V. P. "Statistics of Adsorbed Particles." In Elementary Physicochemical Processes on Solid Surfaces. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4899-2373-8_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fichthorn, Kristen A., and Janhavi S. Raut. "Diffusion of Adsorbed Molecules on Solid Surfaces." In Surface Diffusion. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4899-0262-7_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

MARSAGISHVILI, TAMAZ A., M. N. MACHAVARIANI, and S. A. KIRILLOV. "SOME ASPECTS OF PHYSICAL AND CHEMICAL ADSORPTION ON SURFACE OF AMORPHOUS SOLID." In Combined and Hybrid Adsorbents. Springer Netherlands, 2006. http://dx.doi.org/10.1007/1-4020-5172-7_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Story, Gloria M., Deborah S. Rauch, Philip F. Brode, and Curtis Marcott. "Enzymes Adsorbed onto Model Surfaces." In ACS Symposium Series. American Chemical Society, 1990. http://dx.doi.org/10.1021/bk-1990-0447.ch013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Baker, B. G. "Identification of Adsorbed Species." In Springer Series in Surface Sciences. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-05227-3_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Baker, B. G. "Identification of Adsorbed Species." In Springer Series in Surface Sciences. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-662-02767-7_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhdanov, V. P. "Vibrational Relaxation of Adsorbed Particles." In Elementary Physicochemical Processes on Solid Surfaces. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4899-2373-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Okiji, A., and H. Kasai. "Dynamics of Adsorbed Molecules at Surfaces." In Ordering at Surfaces and Interfaces. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84482-9_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Adsorbent surfaces"

1

Ojong, Ojong Elias, Preniyobo Diepriye Benibo, Fidelis Ibiang Abam, and Silas Shamaye Samuel. "Enhancing Carbon (iv) Oxide Adsorption from Flue Gas Mixture at Elevated Temperature Using Composite of Nanoparticles." In Africa International Conference on Clean Energy and Energy Storage. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-3cwdqg.

Full text
Abstract:
Chitosan/clay materials derived from periwinkle shells and clay soil at a 50:50 ratio were prepared as adsorbents, characterized, and used for the adsorption of CO2 from flue gas at elevated temperatures (500°C - 5000°C) in a fixed bed column (1.5 m in length and 0.02 m in internal diameter). The flue gas, with a composition of Methane (0.003), Ethane (0.002), Hydrogen (0.05), CO2 (0.15), Water Vapor (0.02), and Nitrogen (0.76), at a pressure of 49 KPa, a temperature of 5000°C, and a flow rate of 75 L/min from the exhaust tank, entered the fixed bed column for the adsorption process, where the
APA, Harvard, Vancouver, ISO, and other styles
2

Belarbi, Z., F. Farelas, M. Singer, T. N. Vu, D. Young, and S. Nesic. "Thiols as Volatile Corrosion Inhibitors for Top of the Line Corrosion." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09096.

Full text
Abstract:
Abstract The effectiveness of hexanethiol, decanethiol and 11-mercaptoundecanoic acid for CO2 corrosion inhibition of carbon steel exposed to top of the line conditions has been investigated. Weight loss measurements were used to measure the corrosion rate in the absence and presence of these volatile inhibitor compounds. Afte the experiments, steel surfaces were characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). In addition, surface characterization of adsorbed decanethiol molecules on carbon steel was performed using X-ray photoelectron spectr
APA, Harvard, Vancouver, ISO, and other styles
3

Chakraborty, Anutosh, Kyaw Thu, and Kim Choon Ng. "Advanced Adsorption Cooling cum Desalination Cycle: A Thermodynamic Framework." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63372.

Full text
Abstract:
We have developed a thermodynamic framework to calculate adsorption cooling cum desalination cycle performances as a function of pore widths and pore volumes of highly porous adsorbents, which are formulated from the rigor of thermodynamic property surfaces of adsorbent-adsorbate system and the adsorption interaction potential between them. Employing the proposed formulations, the coefficient of performance (COP) and overall performance ratio (OPR) of adsorption cycle are computed for various pore widths of solid adsorbents. These results are compared with experimental data for verifying the p
APA, Harvard, Vancouver, ISO, and other styles
4

Chakraborty, Anutosh, Bidyut Baran Saha, Shigeru Koyama, Ibrahim Ibrahim El-Sharkawy, and Kim Choon Ng. "Theoretical Insight of Physical Adsorption for a Single Component Adsorbent+Adsorbate System." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42943.

Full text
Abstract:
The thermodynamic property surfaces for a single-component adsorbent + adsorbate system have been derived and developed from the view point of classical thermodynamics. These thermodynamic frameworks enable us to compute the specific heat capacity, partial enthalpy and entropy for the analyses of adsorption processes thoroughly. A theoretical framework for the estimation of the isosteric heat of adsorption between an adsorbate (vapor) and an adsorbent (solid) is also derived for the thermodynamic requirements of chemical equilibrium, Maxwell relations and the entropy of the adsorbed phase. Con
APA, Harvard, Vancouver, ISO, and other styles
5

Kesarwani, H., and S. Sharma. "Adsorption Behaviour of Karanj Oil Surfactant — Role of Different Adsorbent Surfaces." In 83rd EAGE Annual Conference & Exhibition. European Association of Geoscientists & Engineers, 2022. http://dx.doi.org/10.3997/2214-4609.202210619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fomenko, Alexandra Ivanovna. "ÉTUDE DE L'ADSORPTION DES PHOSPHATES DES EAUX USÉES PAR LES CENDRES COMBUSTIBLES." In Themed collection of papers from Foreign International Scientific Conference «Science and innovation in the framework of the strategic partnership between Algeria and Russia» by HNRI «National development» in cooperation with the University of Science and Technology Houari Boumediene. April 2024. Crossref, 2024. http://dx.doi.org/10.37539/240425.2024.25.20.011.

Full text
Abstract:
The results of a study of the adsorption purification of aqueous solutions from phosphates using fuel ash formed during the combustion of solid fuels as an adsorbent are presented (waste from the processing of wood, coal) are presented. The degree of extraction of phosphate ions from aqueous solutions on the presented adsorbents, the specific surface area, and the adsorption capacity were experimentally determined. It has been shown that in relation to phosphate ions, wood ash is a more effective adsorbent compared to coal ash. Les résultats de l'étude sur la purification par adsorption de sol
APA, Harvard, Vancouver, ISO, and other styles
7

KWAK, A. "Application of Zinc-Silver Impregnated Activated Carbons in Removal of Lead(II) and Mercury(II) Compounds from Groundwater." In Quality Production Improvement and System Safety. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902691-9.

Full text
Abstract:
Abstract. Nowadays activated carbon is a material generating great interest, as it is characterized by a vast surface area due to a high number of pores in its structure. Therefore, the main purpose behind its use is the filtration of impurities from air and water that can be adsorbed with high efficiency. Activated carbon can be easily modified as well. The paper describes activated carbon modification with copper-, manganese-, silver- and zinc salts. The effects of the selected impregnates and their concentrations were examined. The products included 5 adsorbent samples: four universal adsor
APA, Harvard, Vancouver, ISO, and other styles
8

Chan, K. C., Christopher Y. H. Chao, and M. Bahrami. "Heat and Mass Transfer Characteristics of a Zeolite 13X/CaCl2 Composite Adsorbent in Adsorption Cooling Systems." In ASME 2012 6th International Conference on Energy Sustainability collocated with the ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/es2012-91246.

Full text
Abstract:
The performance of the adsorption cooling system using the zeolite 13X/CaCl2 composite adsorbent was studied using a numerical simulation. The novel zeolite 13X/CaCl2 composite adsorbent with superior adsorption properties was developed in previous studies [11]. It has high equilibrium water uptake of 0.404 g/g between 25°C and 100°C under 870Pa. The system specific cooling power (SCP) and coefficient of performance (COP) were successfully predicted for different operation parameters. The simulated COP with the composite adsorbent is 0.76, which is 81% higher than a system using pure zeolite 1
APA, Harvard, Vancouver, ISO, and other styles
9

SAMAN, Norasikin, Kavij Kumar SUBRAMANIAN, Khairiraihanna JOHARI, Shazwin MAT TAIB, and Eglė MARČIULAITIENĖ. "Physicochemistry properties of water treatment sludge (WTS) as adsorbents for dyes and antibiotics removal." In 12th International Conference “Environmental Engineering”. VILNIUS TECH, 2023. http://dx.doi.org/10.3846/enviro.2023.951.

Full text
Abstract:
Application of waste materials as adsorbent for water treatment has obtained special attention owning to their low cost and surface functionality. In this study the waste-treatment sludge (WTS) sludge was selected as based materials and used as adsorbents for dyes and antibiotic adsorption. The adsorbent was prepared by calcination of the washed and dried WTS adsorbent (S105) at 300 °C (S300) and 700 °C (S700). The morphology, elemental composition, functional groups, pH at point zero charged, and cationic exchange capacity were observed and evaluated to understand the adsorption performance c
APA, Harvard, Vancouver, ISO, and other styles
10

Abdalla, Mayar Tarek. "Iron Magnesium Coating Chicken Bones for Removal of Copper from Water." In GOTECH. SPE, 2024. http://dx.doi.org/10.2118/219361-ms.

Full text
Abstract:
Abstract Because heavy metals have detrimental effects on aquatic life and public health, their presence in freshwater sources is extremely concerning. Even in low quantities, copper (Cu), one of the most hazardous heavy metals, can result in major health problems. The current study seeks to create a novel adsorption medium using iron (Fe)-coated chicken bones Using magnesium hydroxides, copper can be eliminated from water. In which the chicken bones were treated with stacked double hydroxides (LDH) Physical adsorption is the process by which heavy metals from the waste liquid are adsorbed ont
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Adsorbent surfaces"

1

Sackinger, W. M. Plasma-induced conversion of surface-adsorbed hydrocarbons. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10156508.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Krim, Jacqueline. Interfacial Viscosity Measurements of Adsorbed Monolayers on Metal Surfaces. Defense Technical Information Center, 1992. http://dx.doi.org/10.21236/ada263288.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Weinelt, M., A. Nilsson, and N. Wassdahl. Electronic structure of benzene adsorbed on Ni and Cu surfaces. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/603568.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Oh, H. G., H. R. Lee, Thomas F. George, C. I. Um, Y. M. Choi, and W. H. Kahng. Quantum Mechanics of a Molecular System Adsorbed on a Dielectric Surface. Defense Technical Information Center, 1989. http://dx.doi.org/10.21236/ada206473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Phisalaphong, Muenduen. Development and characterization of activated carbon derived from bacterial cellulose. Chulalongkorn University, 2017. https://doi.org/10.58837/chula.res.2017.66.

Full text
Abstract:
Bacterial cellulose (BC) was investigated as a novel material for preparing activated carbons. BC was dried by heating and it was carbonized with a chemical activation process using phosphoric acid (H₃PO₄) as an activating agent at different temperatures (400, 500 and 600 °C). The properties of the activated carbons were characterized such as chemical property, structure, pore size, thermal property by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), N₂ -physisorption (BET), scanning electron microscopy (SEM) , thermal gravimetric (TGA). The obtained BC activated carbo
APA, Harvard, Vancouver, ISO, and other styles
6

Phisalaphong, Muenduen. Development and characterization of activated carbon derived from bacterial cellulose (Year 2). Faculty of Engineering, Chulalongkorn University, 2018. https://doi.org/10.58837/chula.res.2018.82.

Full text
Abstract:
Bacterial cellulose (BC) was investigated as a novel material for preparing activated carbons. BC was dried by heating and it was carbonized with a chemical activation process using phosphoric acid (H₃PO₄) as an activating agent at different temperatures (400, 500 and 600 °C). The properties of the activated carbons were characterized such as chemical property, structure, pore size, thermal property by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), N₂ -physisorption (BET), scanning electron microscopy (SEM) , thermal gravimetric (TGA). The obtained BC activated carbo
APA, Harvard, Vancouver, ISO, and other styles
7

Gao, Ping, and Michael J. Weaver. Surface-Enhanced Raman Spectroscopy as a Probe or Adsorbate-Surface Bonding: Benzene and Monosubstituted Benzenes Adsorbed at Gold Electrodes. Defense Technical Information Center, 1985. http://dx.doi.org/10.21236/ada159978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Toney, Michael F., Joseph G. Gordon, and Owen R. Melroy. In Situ Surface X-Ray Scattering of Metal Monolayers Adsorbed at Solid-Liquid Interfaces. Defense Technical Information Center, 1991. http://dx.doi.org/10.21236/ada243258.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cernota, Paul Davis. Scanning tunneling microscopy studies of organic monolayers adsorbed on the rhodium(111) crystal surface. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/760334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ruangpornvisuti, Vithaya. Surfaces properties of Zirconia and its adsorption of gases : Research report. Chulalongkorn University, 2015. https://doi.org/10.58837/chula.res.2015.36.

Full text
Abstract:
The adsorption of CO and NH₃ gases on the cubic ZrO2 (110) surface was investigated by two–dimensionally periodic slab model DFT method. The relative adsorption energies of these gases on the cubic ZrO₂ (110) surface is in order: NH₃ &gt; CO. The adsorption energies of NH3 on the cubic ZrO₂ (110) surface are –27.62 and –25.51 kcal/mol, obtained using the PBE0 and B3LYP methods, respectively. The CO adsorption on the cubic ZrO2 (110) surface –11.39 and –9.81 kcal/mol, obtained using the PBE0 with rigid and flexible models, respectively. The geometry optimizations of zirconia nanoparticle (ZrO₂–
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Adsorbent surfaces' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography