Log in

Relevant bibliographies by topics / Advanced factorial design

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Advanced factorial design'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Advanced factorial design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Advanced factorial design"

1

Buijtenen, J. P. van, and R. D. Burdon. "Expected efficiencies of mating designs for advanced-generation selection." Canadian Journal of Forest Research 20, no. 10 (1990): 1648–63. http://dx.doi.org/10.1139/x90-218.

Full text

Abstract:

Expected efficiencies of regular hierarchical, factorial, and diallel crossing designs were compared for selection of individual offspring within progeny plantings. Variations of the diallels and factorials included partial designs, use of disconnected subsets, and in factorials, unbalanced numbers between classes of parent. Calculations were done for a single trait, adapting the within- and between-family selection index of Osborne, with fixed numbers of parents (100) and total offspring (10 000). For each design type, variable numbers of crosses per parent and variable genetic parameters (he

APA, Harvard, Vancouver, ISO, and other styles

2

MUBARAK, N. M., FARIDAH YUSOF, M. F. ALKHATIB, et al. "OPTIMIZATION OF CNTs PRODUCTION USING FULL FACTORIAL DESIGN AND ITS ADVANCED APPLICATION IN PROTEIN PURIFICATION." International Journal of Nanoscience 09, no. 03 (2010): 181–92. http://dx.doi.org/10.1142/s0219581x10006648.

Full text

Abstract:

Carbon nanotubes (CNTs) have been successfully synthesized by using in-house fabricated Double Stage Chemical Vapor Deposition (DS-CVD) technique, using acetylene (C2H2) and hydrogen (H2) as the precursor gases. The purity, morphology and the structure of CNTs were then characterized using Field Emission Scanning Microscope (FESEM), Transmission Electron Microscope (TEM) and Thermogravimetric Analysis (TGA). The effects of the process parameters were examined whereby the experimental design of the investigation was conducted using Design Expert® Version 6.0.8. The statistical analysis reveals

APA, Harvard, Vancouver, ISO, and other styles

3

Salimraftar, Nasim, Saeed Noee, Majid Abdouss, Gholamhossein Riazi, and Zahra Monsef Khoshhesab. "Three-level response surface full-factorial design: advanced chemometric approach for optimizing diclofenac sodium-imprinted polymer." Polymer Bulletin 71, no. 1 (2013): 19–30. http://dx.doi.org/10.1007/s00289-013-1042-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Dao, Yen, Hai Tran, Thien Tran-Lam, Trung Pham, and Giang Le. "Degradation of Paracetamol by an UV/Chlorine Advanced Oxidation Process: Influencing Factors, Factorial Design, and Intermediates Identification." International Journal of Environmental Research and Public Health 15, no. 12 (2018): 2637. http://dx.doi.org/10.3390/ijerph15122637.

Full text

Abstract:

The combination of a low-pressure mercury lamp and chlorine (UV/chlorine) was applied as an emerging advanced oxidation process (AOP), to examine paracetamol (PRC) degradation under different operational conditions. The results indicated that the UV/chlorine process exhibited a much faster PRC removal than the UV/H2O2 process or chlorination alone because of the great contribution of highly reactive species (•OH, •Cl, and ClO•). The PRC degradation rate constant (kobs) was accurately determined by pseudo-first-order kinetics. The kobs values were strongly affected by the operational conditions

APA, Harvard, Vancouver, ISO, and other styles

5

Muniyasamy, Abaranjitha, Gayathri Sivaporul, Abarna Gopinath, Juliana John, Anant Achary, and Padmanaban Velayudhaperumal Chellam. "Fractional factorial design modelling on degradation of Direct Red 81 dye by advanced oxidation process – ozonation: reaction kinetics." Water Science and Technology 80, no. 11 (2019): 2037–46. http://dx.doi.org/10.2166/wst.2019.423.

Full text

Abstract:

Abstract In the present work, the degradation of Direct Red 81 by ozonation was studied. The interactive effects of the influencing factors (dye concentration = 500–2,000 mg/L; time = 10–30 min; pH = 7.0–11.0) on degradation efficiency was critically examined through experimental design optimization by central composite design under the response surface methodology. The high correlation coefficients (R2 = 0.976 & adjusted R2 = 0.958) obtained by analysis of variance (ANOVA) demonstrated close fit between the experimental and the predicted values. Optimized conditions under specified cost-d

APA, Harvard, Vancouver, ISO, and other styles

6

Prato-Garcia, D., and G. Buitrón. "Solar photoassisted advanced oxidation process of azo dyes." Water Science and Technology 59, no. 5 (2009): 965–72. http://dx.doi.org/10.2166/wst.2009.071.

Full text

Abstract:

Advanced oxidation processes assisted with natural solar radiation in CPC type reactors (parabolic collector compound), was applied for the degradation of three azo dyes: acid orange (AO7), acid red 151 (AR151) and acid blue 113 (AB113). Fenton, Fenton like and ferrioxalate-type complexes showed to be effective for degrade the azo linkage and moieties in different extensions. Initially, the best dose of reagents (Fe3 + -H2O2) was determined through a factorial experimental design, next, using response surface methodologies, the reagent consumption was reduced up to 40%, maintaining in all case

APA, Harvard, Vancouver, ISO, and other styles

7

Suleiman, Fatima K., Kaihsiang Lin, and Kyle J. Daun. "Development of a multivariate spectral emissivity model for an advanced high strength steel alloy through factorial design-of-experiments." Journal of Quantitative Spectroscopy and Radiative Transfer 271 (September 2021): 107693. http://dx.doi.org/10.1016/j.jqsrt.2021.107693.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Isaac, Blesson, Robert M. Taylor, and Kenneth Reifsnider. "Anisotropic Characterizations of Electrospun PAN Nanofiber Mats Using Design of Experiments." Nanomaterials 10, no. 11 (2020): 2273. http://dx.doi.org/10.3390/nano10112273.

Full text

Abstract:

This paper deals with the dielectric and mechanical characterizations of polyacrylonitrile (PAN)-aligned electrospun nanofiber mats. A two factor three level full factorial experiment is conducted to understand the effect of various parameters on dielectric and mechanical responses. These responses are recorded against randomly oriented and aligned nanofiber mats. Improved properties of electrospun mats have applications in the field of energy storage and nanocomposite reinforcement. Dielectric and mechanical characterizations of PAN mats are vital, as the aligned electrospun mats were found t

APA, Harvard, Vancouver, ISO, and other styles

9

Kesvarakul, Ramil, Chamaporn Chianrabutra, and Watcharapong Sirigool. "Applying 2^k Factorial Design to Study on Parameters Affecting Springback of Forming of Advanced High Strength Steel Sheets (AHSS)." Applied Mechanics and Materials 872 (October 2017): 83–88. http://dx.doi.org/10.4028/www.scientific.net/amm.872.83.

Full text

Abstract:

Advanced high strength steels (AHSS) are widely used in the automotive industry due to their appropriate strength to weight ratio. This alloy has unique hardening behavior and variable unloading elastic modulus; however, the unavoidable obstacle of AHSS sheet metal forming is springback. The springback is a result of elastic recovery and residual stress. The aim of this study is to determine the proper process parameters enabling the reduction of the springback defects in AHSS forming process. This work was divided into two parts, regarding to the effects of numerical parameters and process pa

APA, Harvard, Vancouver, ISO, and other styles

10

BHATTACHARJEE, P., K. RAMESH KUMAR, and T. A. JANARDHAN REDDY. "RELIABILITY DESIGN EVALUATION AND OPTIMIZATION OF A NITROGEN GAS BOTTLE USING RESPONSE SURFACE METHOD." International Journal of Reliability, Quality and Safety Engineering 17, no. 02 (2010): 119–32. http://dx.doi.org/10.1142/s0218539310003706.

Full text

Abstract:

Optimization of any aerospace product results in increasing payload capacity of space vehicles. Essentially weight, volume and cost are the main constraints. Design optimization studies for aerospace system are increasingly gaining importance. The problem of optimum design under uncertainty has been formulated as reliability-based design optimization. The reliability based optimization, which includes robustness requirements leads to multi-objective optimization under uncertainty. In this paper Reliability, based design optimization study is carried out under linear constraint optimization to

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Advanced factorial design"

1

Azizsoltani, Hamoon, and Hamoon Azizsoltani. "Risk Estimation of Nonlinear Time Domain Dynamic Analyses of Large Systems." Diss., The University of Arizona, 2017. http://hdl.handle.net/10150/624545.

Full text

Abstract:

A novel concept of multiple deterministic analyses is proposed to design safer and more damage-tolerant structures, particularly when excited by dynamic including seismic loading in time domain. Since the presence of numerous sources of uncertainty cannot be avoided or overlooked, the underlying risk is estimated to compare design alternatives. To generate the implicit performance functions explicitly, the basic response surface method is significantly improved. Then, several surrogate models are proposed. The advanced factorial design and Kriging method are used as the major building blocks.

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Chun-Chieh, and 王俊傑. "The Fire Safety Design for Advanced Technology Factories - A Case Study for Wafer Fabrication." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/80931768137898703805.

Full text

Abstract:

碩士<br>國立交通大學<br>機械工程系<br>91<br>This study adopts the SFPE Performance-based design procedure to evaluate the performance of upward and downward smoke exhaust systems, respectively, in a wafer fabrication area. The tools used are FDS (Fire Dynamics Simulator), Simulex and three traditional calculation methods. The peaks of design fires are 800 kW (scenario 1) and 3 MW (scenario 2). Both smoke exhaust systems in scenario 1 meet the performance criteria, whereas the downward one in scenario 2 cannot satisfied with the requirement. The performance of upward exhaust system is better. However,

APA, Harvard, Vancouver, ISO, and other styles

3

Fang, Chih-Feng, and 方志峰. "The Fire Safety Design for Advanced Technology Factories by Using the Cooling System-A Case Study in Cleanroom." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/4xwx54.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>土木與防災研究所<br>98<br>The sprinkler or fire-fighting methods are mainly of two gas asphyxiation contact the fire program of the high-tech factory fire.There are using high-tech factories in special conditions. It may cause the risk of water damage or suffocation of the victims. This study investigated the different cooling systems and designing, the simulated system configuration in the clean room. Does not touch any object within the principle of space, the fire heat conduction in the external. Using these methods to decrease the internal temperature, it postponed bursting times

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Advanced factorial design"

1

Goodfellow, Howard D. Advanced design of ventilation systems for contaminant control. Elsevier, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Advanced factorial design"

1

Pinto, Alexandre H. "The Importance of Factorial Design of Experiments in Functional Nanomaterials Preparation and Performance." In Functional Properties of Advanced Engineering Materials and Biomolecules. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-62226-8_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ahmed, Khaled, Mohammed Al-Khawaja, and Muhannad Suleiman. "Optimization of Energy Pile Conductance Using Finite Element and Fractional Factorial Design of Experiment." In Advanced Control Engineering Methods in Electrical Engineering Systems. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-97816-1_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bonnet, Frank, and Francesco Mondada. "Application of a Fractional Factorial Design to Model the Attractiveness of a Robotic Fish to a Shoal of Zebrafish." In Springer Tracts in Advanced Robotics. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16781-3_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Wu, Yangdong. "Design Factor Analysis Based on Fractional Factorial Experiment." In Advances in Mechanical Design. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6553-8_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Grömping, Ulrike, and R. A. Bailey. "Regular Fractions of Factorial Arrays." In mODa 11 - Advances in Model-Oriented Design and Analysis. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31266-8_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Fontana, Roberto, and Giovanni Pistone. "Algebraic Generation of Orthogonal Fractional Factorial Designs." In Advances in Theoretical and Applied Statistics. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-35588-2_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Abdulkarim, Muhammad, Afza Shafie, Wan Fatimah Wan Ahmad, and Radzuan Razali. "A Simulation Study on Factors Affecting Airwaves Using Factorial Design." In Advances in Visual Informatics. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-02958-0_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hannah, R. E., V. L. Cunningham, and J. P. McGough. "Evaluation of Bonded-Phase Extraction Techniques Using a Statistical Factorial Experimental Design." In Advances in Chemistry. American Chemical Society, 1986. http://dx.doi.org/10.1021/ba-1987-0214.ch017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mazzaro, D., F. Pesarin, and L. Salmaso. "Permutation Tests for Effects in Unbalanced Repeated Measures Factorial Designs." In mODa 6 — Advances in Model-Oriented Design and Analysis. Physica-Verlag HD, 2001. http://dx.doi.org/10.1007/978-3-642-57576-1_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Rauch, Erwin. "Industry 4.0+: The Next Level of Intelligent and Self-optimizing Factories." In Advances in Design, Simulation and Manufacturing III. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-50794-7_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Advanced factorial design"

1

Saha, Prabir Kumar, Arindam Banerjee, Anup Dandapat, et al. "Low Power and High Speed Factorial Design in 22 nm Technology." In INTERNATIONAL CONFERENCE ON ADVANCED NANOMATERIALS AND NANOTECHNOLOGY (ICANN-2009). AIP, 2010. http://dx.doi.org/10.1063/1.3504314.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Rachmawaty, Syamsiah, Irma Suryani Idris, Halifah Pagarra, Hartati, and Madihah M. Salleh. "Screening factors influencing chitinase production by Trichoderma virens using two level factorial design." In GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS: Proceedings of the 4th International Conference on Green Design and Manufacture 2018. Author(s), 2018. http://dx.doi.org/10.1063/1.5066817.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Daniel, S. "Optimization of the process by response factorial design analysis of textile dyes removal by adsorption using nanocomposite." In PROCEEDINGS OF ADVANCED MATERIAL, ENGINEERING & TECHNOLOGY. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0019889.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhu, Shijun, Yun Liu, and Seong Lee. "Optimization Process of Biomass Combustion in the Advanced FBC Using Factorial Design and Response Surface Methodology." In 18th International Conference on Fluidized Bed Combustion. ASMEDC, 2005. http://dx.doi.org/10.1115/fbc2005-78112.

Full text

Abstract:

This paper studied the optimization process of the combustion of poultry waste material (i.e. poultry manure) in an advanced fluidized bed combustor (FBC) with the secondary air tangential injection. In order to test the influences of combustion parameters on the carbon combustion efficiency, factorial design (FD) and response surface methodology (RSM) were applied in the experimental process and data analysis. The parameters studied were moisture content, waste/natural gas ratio, excess air ratio, secondary/total air ratio, and the height levels of the secondary air injection. Using the 25−1

APA, Harvard, Vancouver, ISO, and other styles

5

Ramadout, Benoit, Deepal Wehella-Gamage, Thomas Staiger, et al. "A multi-factorial approach for middle-of-line design rule validation and optimization in 22FDX®." In 2018 29th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC). IEEE, 2018. http://dx.doi.org/10.1109/asmc.2018.8373216.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Noor, N. M., N. A. Anuar, Z. I. Abd-Rasid, N. Mohtar, and R. Hasham. "Design of experiment of redispersible spray dried powder of fatty acid-nanostructured lipid carriers using a 23 full factorial design." In PROCEEDINGS OF 8TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS ENGINEERING & TECHNOLOGY (ICAMET 2020). AIP Publishing, 2021. http://dx.doi.org/10.1063/5.0051912.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Joao, Isabel M., and Joao M. Silva. "Student engagement with statistical design of experiments by active learning projects." In HEAd'16 - International Conference on Higher Education Advances. Universitat Politècnica València, 2016. http://dx.doi.org/10.4995/head16.2016.2650.

Full text

Abstract:

This paper illustrates the use of design of experiments in an active learning environment in a new Master course in Quality and Environmental Engineering at a higher education institution in Portugal. The study took place in the unit of Advanced Techniques for Quality. The aim of this work is to explain how in an active learning environment the students worked on projects designed to use fractional factorial designs in order to improve a system including the impact that the approach had on students. Twelve master students took part of the classroom projects. Three groups of students worked on

APA, Harvard, Vancouver, ISO, and other styles

8

Wagner, Mark, James DeYoung, Chris Harbinson, and Merrick Miles. "Development of EUV resists in supercritical CO 2 solutions using CO 2 compatible salts (CCS): results from a two-level full factorial design of experiments (DOE)." In SPIE 31st International Symposium on Advanced Lithography, edited by Qinghuang Lin. SPIE, 2006. http://dx.doi.org/10.1117/12.656272.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Garrison, Loren, and Sarah Walter. "Multidisciplinary Design Space Characterization of a Prediffuser, Strut, and Frame." In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-60159.

Full text

Abstract:

The multidisciplinary exploration and characterization of a design space challenges the boundaries of analysis capability and design process structure for many current industrial applications. In the present study, parallel independent structural and aerodynamic analysis of a prediffuser flow path, strut, and frame was performed in conjunction with design of experiments (DoE) techniques to efficiently characterize the multidisciplinary design space. The key interactions between geometric parameters and the sensitivity factors of each parameter in relation to stress output were calculated. Aero

APA, Harvard, Vancouver, ISO, and other styles

10

Lee, Seong W., and Yun Liu. "Factorial Analysis on the 2-D Transient Solid Velocity in Fluidized Bed Combustor." In 17th International Conference on Fluidized Bed Combustion. ASMEDC, 2003. http://dx.doi.org/10.1115/fbc2003-168.

Full text

Abstract:

The transient solid velocity analysis in fluidized bed combustor (FBC) freeboard has been critical in the past two decades (Haidin et al 1998). The FBC cold model (6-in ID) was designed and fabricated. The solid transient velocity in FBC freeboard was measured and analyzed with the assistance of the advanced instrumentation. The laser-based Particle Image Velocimetry (PIV) was applied to the FBC cold model to visualize the transient solid velocity. A series of transient particle velocity profiles were generated for factorial analysis. In each profile, the particle velocity vectors for 100 posi

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!