Dissertations / Theses: 'Aerial photography in geomorphology'

1

Dicks, Steven E. "Satellite-derived surface temperatures and their relationships to land cover, land use, soils and physiography of North-Central Florida." Gainesville, FL, 1986. http://www.archive.org/details/satellitederived00dick.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gregorio, Michael Anthony. "Geomorphic Effects of the Hocking River Channelization at Athens, Ohio, on the Downstream Planform." Ohio University / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1213210389.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ninfo, Andrea. "DEM e telerilevamento per lo studio geomorfologico delle pianure alluvionali." Doctoral thesis, Università degli studi di Padova, 2009. http://hdl.handle.net/11577/3426454.

Full text

Abstract:

Alluvial plains are characterized by a very low gradient relief and is difficult to detect their morphologies from the terrain. Two methodologies are applied to study the geomorphology of the venetian-friulian plane and the Murghab,s terminal fan (Turkmenistam): analysis of DEMs and remote sensing images, acquired from satellite and aerial platform.. DEMs are the fundamental input of the terrain modeling, but their theory references are relatively poor defined, especially in low gradient area. The use of a methodology (DEM) where the uncertainty always exists, need a synthesis of the conceptual model adopted in this research. The application of a methodology where uncertain is always around the corner is needed to give a synthesis of the conceptual model adopted in this research. The morphometric analyses on an apposite constructed DEM of the Venetian plain, permit the automatic classification of the landforms, with a good level of coherence and detail. Statistical analyses of the curvatures show their strong geomorphic meaning and can help to distinguish the processes that, over time, have generate this complex system. The acquisition and the processing of oblique aerial photographs in the part of friulian-venetian plain, crossed by the roman road via Annia, give new results to investigate the paleohydrology and geoarcheology of this area. Cropmark reveals, with extraordinary clearness, parts of the millenary interaction between natural and human dynamics. Both methods are effective in the study of the geomorphological evolution of the Murghab’s terminal fan. The morphological monotony of the distal part of the fan, clashes with the complexity of the interactions between the processes that regulate their evolution. The appropriate use of both the methodologies, followed by the validate on terrain, can give a substancial contribute to the geomorphological study of alluvial plains.
Le pianure alluvionali si caratterizzano per la debole inclinazione e le morfologie fluviali che le costituiscono risultano difficilmente percepibili sul terreno. In questa ricerca, due metodologie sono applicate allo studio gemorfologico della pianura veneto-friulana e di quella del Murghab (Tukmenistan): l’analisi di DEM e di immagini telerilevate, da piattaforma satellitare e aerea. I DEM costituiscono l’input fondamentale del terrain modeling ma il loro quadro di riferimento teorico è relativamente poco definito. Nell’applicazione di un metodo (DEM) dove l’incertezza è sempre latente, si sente il bisogno di fornire una sintesi dei modelli concettuali adottati in questa ricerca. L’analisi morfometrica condotta sul DEM della pianura veneta, adeguatamente preparato, consente la classificazione automatica delle morfologie con un buon grado di coerenza. L’analisi statistica delle curvature dimostra il loro forte significato geomorfologico e si rivela d’ausilio per caratterizzare i processi che nel tempo hanno generato le diverse superfici che costituiscono la pianura. L’acquisizione e l’elaborazione di dati telerilevati di dettaglio nella bassa pianura venetofriulana attraversata dalla via Annia (di epoca romana), che congiungeva le principali città dell’Alto Adriatico, ha portato buoni risultati. I cropmark rivelano con straordinaria chiarezza “frammenti” della millenaria interazione tra dinamiche naturali e antropiche in questa porzione di territorio. Entrambi i metodi si sono rivelati efficaci nello studio dell’evoluzione geomorfologica del terminal fan del Murghab. La monotonia morfologica che caratterizza le pianure contrasta con la complessità delle interazioni tra i processi che ne controllano l’evoluzione. Un adeguato utilizzo incrociato di entrambe le metodologie, seguito dalla validazione sul terreno, può fornire un sostanziale contributo allo studio geomorfologico delle pianure alluvionali.

APA, Harvard, Vancouver, ISO, and other styles

4

Partanen, S. (Sari). "Recent spatiotemporal changes and main determinants of aquatic macrophyte vegetation in large lakes in Finland." Doctoral thesis, University of Oulu, 2007. http://urn.fi/urn:isbn:9789514285950.

Full text

Abstract:

Abstract During the past half century several large lakes in Finland have experienced notable changes in their ecological condition, induced mainly by water level regulation, eutrophication and land use transformation. The objective of this thesis was the quantification of the spatiotemporal changes of aquatic macrophytes in Finland during the second half of the 1900s. Mapped aquatic macrophyte cover from historic (1947–1963) and present day (1996–2000) aerial photographs, additional macrophyte data and several environmental variables were used to identify the main determinants of aquatic macrophyte distribution, abundance and change. Furthermore, factors influencing the littoral paludification process were identified. The study was conducted in 24 boreal lakes (41–1116 km2) with multisource vegetation data. Selected environmental variables of water level regulation, eutrophication and geomorphology were collected and analyzed. More than 402 km of littoral shoreline in historic and present day aerial photographs was analyzed with stereoscopic visual interpretation. A total of 474 habitat level study sites were used to examine the determining environmental factors of occurrence, abundance and change of emergent vegetation. Finally, 289 vegetation transects were performed in order to study the occurrence, types and main determinants of littoral paludification. Water level regulation was found to be the primary factor behind aquatic macrophyte vegetation development at the whole lake level. The major vegetation changes were determined by the mean water level rise or reduction, decreased fluctuation range and reduced spring flood. The vegetation response was less pronounced in a lake with water level regulation similar to natural fluctuation. Eutrophication influenced aquatic macrophytes at the site level. Land use variables of tributary and agriculture, indicating nutrient increment, corresponded positively with vegetation occurrence and abundance. Geomorphology explained vegetation development at the habitat level. Clay and related deposits and the shore slope specified the vegetation occurrence and affected the abundance of vegetation. Water level regulation, eutrophication, clay and shallowness were found to influence paludification. Helophyte species, common reed (Phragmites australis) and water horsetail (Equisetum fluviatile), dominated the emergent vegetation in the studied lakes
Tiivistelmä Viimeisen puolen vuosisadan aikana suomalaisiin suurjärviin on kohdistunut lukuisia muutoksia, jotka ovat vaikuttaneet järvien ekologiseen tilaan. Muutoksia ovat aiheuttaneet pääasiallisesti vesistöjen säännöstely, rehevöityminen sekä maankäytön muuttuminen. Tämän väitöskirjan tarkoituksena on analysoida noin viimeisten 50 vuoden aikana suomalaisissa suurjärvissä tapahtunutta ranta- ja vesikasvillisuuden pitkäaikaismuutosta. Historiallisilla (1947–1963) ja nykyisillä (1996–2000) ilmakuvilla, muilla kasvillisuusaineistoilla sekä useilla ympäristömuuttujilla tunnistettiin keskeisiä tekijöitä, jotka vaikuttivat kasvillisuuden esiintymiseen, runsauteen ja muutokseen. Tämän lisäksi tutkittiin rantojen pysyvän umpeenkasvun kehitysprosessia. Tutkimusta varten kasvillisuudesta kerättiin monilähdeaineistoa kaikilta Suomen päävaluma-alueilta yhteensä 24 eri järveltä, joiden koko vaihteli 41–1116 km2:n välillä. Tämän lisäksi useita vesistöjen säännöstelyn, rehevöitymisen ja geomorfologian ympäristömuuttujia kerättiin ja analysoitiin. Stereoskooppisella visuaalisella ilmakuvatulkinnalla tutkittiin yli 402 kilometriä rantaviivaa historiallisista ja nykyisistä ilmakuvista. Ilmaversoisen ranta- ja vesikasvillisuuden esiintymistä, runsautta ja historiallista muutosta analysoitiin 474 habitaattitason tutkimuspisteellä. Rantojen pysyvän umpeenkasvun esiintymistä, umpeenkasvun eri tyyppejä ja sitä määrittäviä tekijöitä tutkittiin 289 kasvilinjalla. Tutkimuksen tuloksena havaittiin, että järvitasolla vesistöjen säännöstely oli tärkein kasvillisuuden historialliseen kehitykseen vaikuttava tekijä. Huomattavimmat kasvillisuusmuutokset määräytyivät keskiveden noston, pienentyneen säännöstelyvälin, vähentyneen kevättulvan ja lasketun keskiveden tason seurauksena. Kasvillisuusmuutokset eivät olleet niin selviä, jos säännöstely muistutti luonnontilaista säännöstelyä. Rehevöityminen vaikutti ranta- ja vesikasvillisuuteen paikallisesti. Ravinteisuutta ilmentävät maankäytön muuttujat, ojat sekä maanviljelys, lisäsivät kasvillisuuden esiintymistä ja runsautta. Geomorfologiset tekijät selittivät kasvillisuuden kehitystä habitaattitasolla. Savinen maaperä sekä rannan mataluus lisäsivät vesi- ja rantakasvillisuuden esiintymistä sekä kasvillisuuden runsautta. Vesistöjen säännöstely, rehevöityminen, savinen maaperä sekä rannan mataluus lisäsivät rantojen pysyvää umpeenkasvua. Ilmaversoiset kasvilajit, järviruoko (Phragmites australis) ja järvikorte (Equisetum fluviatile), hallitsivat kasvillisuutta tutkituissa järvissä

APA, Harvard, Vancouver, ISO, and other styles

5

Parmar, Nisha Pravin. "Channel migration and bank erosion of the Clark Fork River at Grant-Kohrs Ranch n.h.s." [Missoula, Mont.] : The University of Montana, 2008. http://etd.lib.umt.edu/theses/available/etd-12152008-174451/unrestricted/Parmar_Nisha_Thesis.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Giuliano, Jérémy. "Érosion des falaises de la région Provence-Alpes-Côte d’Azur : évolution et origine de la morphologie côtière en Méditerranée : télédétection, géochronologie, géomorphologie." Thesis, Nice, 2015. http://www.theses.fr/2015NICE4126/document.

Full text

Abstract:

L’intérêt croissant pour l’étude de la morphogénèse des côtes à falaises a permis de mieux appréhender les environnements méso/macrotidaux, mais en délaissant les environnements microtidaux. Pour cette raison, nous proposons d’étudier, à partir d’une approche exploratoire multi-échelle, la dynamique érosive des côtes à falaises en Méditerranée à travers l’exemple de la région Provence-Alpes-Côte d’Azur. Le choix de ce territoire s’est justifié en réponse à une problématique relative à la gestion des risques côtiers identifiée par le Conseil-Régional-PACA qui a financé ce travail doctoral. Les principaux objectifs visent à caractériser d’une part l’ampleur relative des occurrences érosives en fonction de la variabilité temporelle des forçages météo-climatiques, et d’autre part le degré du contrôle géologique sur la morphologie côtière. Toute la difficulté de l’étude réside donc dans l’optimisation des fenêtres d’observation afin de distinguer les comportements érosifs. Nous proposons donc de tester l’apport de quatre méthodes permettant de définir si l’érosion se produit de manière (1) continue à l’échelle annuelle (levés LiDAR embarqués depuis un bateau), (2) chronique à l’échelle séculaire (orthophotographies aériennes) et (3) exceptionnelle voir (4) catastrophique sur les temps propres à l’Holocène et au Quaternaire (datations aux cosmogéniques in situ 36Cl et analyses morphométriques). Au regard des résultats mesurés et interprétés, il apparaît que l’activité gravitaire produite au cours du XXe siècle (érosion moyenne de l’ordre du cm.an-1) est très faible par rapport aux environnements méso/macrotidaux
Increasing interest in studying rocky cliff coastline morphogenesis allowed a better understanding of meso/macrotidal environments, but let microtidal environments apart. Thus we propose studying the dynamic of cliff coastlines erosion in Mediterranean in the South-East of France, through a multi-scale explorative approach. This doctoral work was supported by the region Provence-Alpes-Côte d’Azur, which identified a problematic in relation with coastal hazard management. The main objectives aim at characterizing on one hand how the temporal variability of meteorologic and climatic forcings affects the magnitude of erosion, and on other hand to which extent the geological setting controls the coastline morphology. The great challenge of this work therefore consists in optimizing the observation range in order discriminate erosive behaviours. Thus we propose assessing the contribution of four methods in determining whether erosion takes place (1) continuously at annual scale (boat-borne laser scanning surveys), (2) chronic at secular scale (aerial orthophographies)and (3) exceptional even (4) catastrophic over the characteristic timescales of Holocene and Quaternary (cosmic ray exposure dating from in-situ 36Cl and morphometric analysis). The interpretation of the results shows that erosion rate observed through the XXth century (order of magnitude of cm.y-1) is very low compared to meso/macrotidal environments. However at timescales ranging from pluri-secular (0.29 ka BP) to pluri-millenar (6.8 ka BP), exceptional storms surges of +3 NGF could initiate an erosion process resulting in the formation of horizontal shore platforms

APA, Harvard, Vancouver, ISO, and other styles

7

McCarthy, Forrest G. "Landcover change in Arctic Alaska observations through repeat photography /." Laramie, Wyo. : University of Wyoming, 2008. http://proquest.umi.com/pqdweb?did=1594501471&sid=1&Fmt=2&clientId=18949&RQT=309&VName=PQD.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Pelcat, Yann S. "Soil landscape characterization of crop stubble covered fields using Ikonos high resolution panchromatic images." Thesis, Winnipeg : University of Manitoba, 2006. http://www.collectionscanada.ca/obj/s4/f2/dsk3/MWU/TC-MWU-224.pdf.

Full text

Abstract:

Thesis (M.Sc.)--University of Manitoba, 2006.
A thesis submitted to the Faculty of Graduate Studies in partial fulfillment of the requirements for the degree of Master of Science, Department of Soil Science. Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

9

Wolf, Eric B. "Low-cost large scale aerial photography and the Upland South Folk Cemetery a thesis presented to the Department of Geology and Geography in candidacy for the degree of Master of Science /." Diss., Maryville, Mo. : Northwest Missouri State University, 2006. http://www.nwmissouri.edu/library/theses/WolfEricB/index.htm.

Full text

Abstract:

Thesis (M.S.)--Northwest Missouri State University, 2006.
The full text of the thesis is included in the pdf file. Title from title screen of full text.pdf file (viewed on January 25, 2008) Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

10

Richards, Daniel L. "Open source UAV platform development for aerial photography." Thesis, California State University, Long Beach, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=1587919.

Full text

Abstract:

Aerial photography is an important layer in Geographic Information Systems (GISs), and generally provides the base layer from which many other digital map layers are derived. Capturing these photos from a traditional full-sized airplane is a complex and expensive process. The recent development of Unmanned Aerial Vehicles (UAVs) and associated technology are providing an alternative to the traditional aerial mapping process. UAVs produced by popular commercial vendors are effective at capturing photos, but are highly expensive to acquire, and equally expensive to maintain.

This research project demonstrates the development and successful implementation of a relatively inexpensive ($2000) unmanned aerial vehicle capable of acquiring high-resolution digital aerial photography. The UAV was developed using open source technology and commercially available components. The methods outlined encompass the platform selection, component inventory, design, construction, configuration, implementation, and testing of the UAV, as well as an analysis of the photography produced by the process. This approach can be used by others to implement similar UAV projects.

APA, Harvard, Vancouver, ISO, and other styles

11

Simpson, Andrew David. "DEVELOPMENT OF AN UNMANNED AERIAL VEHICLE FOR LOW-COST REMOTE SENSING AND AERIAL PHOTOGRAPHY." UKnowledge, 2003. http://uknowledge.uky.edu/gradschool_theses/191.

Full text

Abstract:

The paper describes major features of an unmanned aerial vehicle, designed undersafety and performance requirements for missions of aerial photography and remotesensing in precision agriculture. Unmanned aerial vehicles have vast potential asobservation and data gathering platforms for a wide variety of applications. The goalof the project was to develop a small, low cost, electrically powered, unmanned aerialvehicle designed in conjunction with a payload of imaging equipment to obtainremote sensing images of agricultural fields. The results indicate that this conceptwas feasible in obtaining high quality aerial images.

APA, Harvard, Vancouver, ISO, and other styles

12

Gurtner, Alex. "Investigation of fisheye lenses for small UAV aerial photography." Thesis, Queensland University of Technology, 2008. https://eprints.qut.edu.au/19323/1/Alex_Gurtner_Final_Thesis.pdf.

Full text

Abstract:

Aerial photography obtained by UAVs (Unmanned Aerial Vehicles) is an emerging market for civil applications. Small UAVs are believed to close gaps in niche markets, such as acquiring airborne image data for remote sensing purposes. Small UAVs will be able to fly at low altitudes, in dangerous environments and over long periods of time. However, the small lightweight constructions of these UAVs lead to new problems, such as higher agility leading to more susceptibility to turbulence and limitations in space and payload for sensor systems. This research investigates the use of low-cost fisheye lenses to overcome such problems which theoretically makes the airborne imaging less sensitive to turbulence. The fisheye lens has the benet of a large observation area (large field of view) and doesn't add additional weight to the aircraft, like traditional mechanical stabilizing systems. This research presents the implementation of a fisheye lens for aerial photography and mapping purposes, including theoretical background of fisheye lenses. Based on the unique feature of the distortion being a function of the viewing angle, methods used to derive the fisheye lens distortion are presented. The lens distortion is used to rectify the fisheye images before these images can be used in aerial photography. A detailed investigation into the inner orientation of the camera and inertial sensor is given, as well as the registration of airborne collected images. It was found that the attitude estimation is critical towards accurate mapping using low quality sensors. A loosely coupled EKF filter applied to the GPS and inertial sensor data estimated the attitude to an accuracy of 3-5° (1-sigma) using low-cost sensors typically found in small UAVs. However, the use of image stitching techniques may improve the outcome. On the other hand, lens distortion caused by the fisheye lens can be addressed by rectification techniques and removed to a sub-pixel level. Results of the process present image sequences gathered from a piloted aircraft demonstrating the achieved performance and potential applications towards UAVs. Further, an unforeseen issue with a vibrating part in the lens lead to the need for vibration compensation. The vibration could be estimated to ±1 pixel in 75% of the cases by applying an extended Hough transform to the fisheye images.

APA, Harvard, Vancouver, ISO, and other styles

13

Gurtner, Alex. "Investigation of fisheye lenses for small UAV aerial photography." Queensland University of Technology, 2008. http://eprints.qut.edu.au/19323/.

Full text

Abstract:

Aerial photography obtained by UAVs (Unmanned Aerial Vehicles) is an emerging market for civil applications. Small UAVs are believed to close gaps in niche markets, such as acquiring airborne image data for remote sensing purposes. Small UAVs will be able to fly at low altitudes, in dangerous environments and over long periods of time. However, the small lightweight constructions of these UAVs lead to new problems, such as higher agility leading to more susceptibility to turbulence and limitations in space and payload for sensor systems. This research investigates the use of low-cost fisheye lenses to overcome such problems which theoretically makes the airborne imaging less sensitive to turbulence. The fisheye lens has the benet of a large observation area (large field of view) and doesn't add additional weight to the aircraft, like traditional mechanical stabilizing systems. This research presents the implementation of a fisheye lens for aerial photography and mapping purposes, including theoretical background of fisheye lenses. Based on the unique feature of the distortion being a function of the viewing angle, methods used to derive the fisheye lens distortion are presented. The lens distortion is used to rectify the fisheye images before these images can be used in aerial photography. A detailed investigation into the inner orientation of the camera and inertial sensor is given, as well as the registration of airborne collected images. It was found that the attitude estimation is critical towards accurate mapping using low quality sensors. A loosely coupled EKF filter applied to the GPS and inertial sensor data estimated the attitude to an accuracy of 3-5° (1-sigma) using low-cost sensors typically found in small UAVs. However, the use of image stitching techniques may improve the outcome. On the other hand, lens distortion caused by the fisheye lens can be addressed by rectification techniques and removed to a sub-pixel level. Results of the process present image sequences gathered from a piloted aircraft demonstrating the achieved performance and potential applications towards UAVs. Further, an unforeseen issue with a vibrating part in the lens lead to the need for vibration compensation. The vibration could be estimated to ±1 pixel in 75% of the cases by applying an extended Hough transform to the fisheye images.

APA, Harvard, Vancouver, ISO, and other styles

14

Buckley, Craig. "Photomosaicing and automatic topography generation from stereo aerial photography." Thesis, Manhattan, Kan. : Kansas State University, 2008. http://hdl.handle.net/2097/790.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Gombos, Andrew David. "DETECTION OF ROOF BOUNDARIES USING LIDAR DATA AND AERIAL PHOTOGRAPHY." UKnowledge, 2010. http://uknowledge.uky.edu/gradschool_theses/75.

Full text

Abstract:

The recent growth in inexpensive laser scanning sensors has created entire fields of research aimed at processing this data. One application is determining the polygonal boundaries of roofs, as seen from an overhead view. The resulting building outlines have many commercial as well as military applications. My work in this area has created a segmentation algorithm where the descriptive features are computationally and theoretically simpler than previous methods. A support vector machine is used to segment data points using these features, and their use is not common for roof detection to date. Despite the simplicity of the feature calculations, the accuracy of our algorithm is similar to previous work. I also describe a basic polygonal extraction method, which is acceptable for basic roofs.

APA, Harvard, Vancouver, ISO, and other styles

16

Gifford, Eric Allan 1965. "Hough transform extraction of cartographic fiducial marks from aerial photography." Thesis, The University of Arizona, 1991. http://hdl.handle.net/10150/277903.

Full text

Abstract:

Cartographic compilation requires precision mensuration. The calibration of mensuration processes is based on specific fiducials. External fiducials, around the exterior frame of the image, must be precisely measured to establish the overall physical geometry. Internal fiducials are provided within the image by placement of cloth panels on the ground at locations whose position is precisely known. Both types of fiducials must be known within the pixel space of a digitized image in order for the feature extraction process to be accurate with respect to delineated features. Precise mensuration of these fiducials requires that a cartographer view the image on a display and use pointing devices, such as a mouse, to pick the exact point. For accurate fiducial location, the required manual operations can be an added time-consuming task in the feature extraction process. Interactive tools which eliminate the precise pointing action for the operator are described in this thesis. The operator is required only to "box-in" the fiducial, using a simple drawing tool, select the fiducial function, and the software of the tool returns the precise location of the fiducial.

APA, Harvard, Vancouver, ISO, and other styles

17

Fu, Youtong. "Use Of Small Format Aerial Photography in NPS Pollution Control Applications." Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/26346.

Full text

Abstract:

An automated procedure was developed to identify and extract confined poultry facilities from color 35-mm slide imagery collected by the United States Department of Agriculture/Farm Service Agency (USDA/FSA). The imagery is used by the USDA/FSA to monitor compliance with various farm support programs and to determine crop production acreage within a given county. The imagery is generally available for all counties within the state on an annual basis. The imagery, however, is not flown to rigid specifications as flight height, direction, and overlap can vary significantly. The USDA/FSA attempts to collect imagery with reasonably clear skies, as visual interpretations could be drastically impacted by cloudiness. The goal of this study was to develop procedures to effectively utilize this imagery base to identify and extract poultry facilities using automated techniques based on image processing and GIS. The procedure involved pre-screening the slides to determine coverage, geopositioning to USGS quadrangle base, color scanning to convert slide image to a digital format and archiving each data file with a naming convention that would allow rapid retrieval in later analysis. Image processing techniques were developed for identifying poultry facilities based on spectral characteristics. GIS tools were used to select poultry facilities from an array of features with similar spectral characteristics. A training data set was selected from which the spectral characteristics of poultry facilities were analyzed and compared with background conditions. Poultry facilities were found to have distinguishable characteristics. Descriptive statistics were used to define the range of spectral characteristics encompassing poultry facilities. Thresholding analyses were then utilized to eliminate all image features with spectral characteristics outside of this range. Additional analyses were made to remove noise in the spectral image due to the sun angle, line of sight of camera, variation in roof reflectance due to rust and/or aging, shading by trees, etc. A primary objective in these analyses was to enhance the spectral characteristics for the poultry facility while, at the same time, retaining physical characteristics, i.e. the spectral characteristic is represented by a single blue color with a high brightness value. The techniques developed to achieve a single blue color involved the use of Principal Component Analysis (PCA) on the red color band followed by RGB to Hue and RGB to Saturation analyses on the red and green color bands, respectively, from the resulting image. The features remaining from this series of analyses were converted into polygons (shape file) using ArcView GIS, which was then used to calculate the area and perimeter of each polygon. The parameters utilized to describe the shape of a poultry house included width, length, compactness, length-width ratio, and polygon centroid analysis. Poultry facilities were found to have an average width of approximately 12.6m with a low standard deviation indicating that the widths of all houses were very similar. The length of poultry facilities ranged from 63m to 261m with and average length of 149m. The compactness parameter, which also is related to length and width, ranged from 30 to 130 with a mean value of approximately 57. The shape parameters were used by ArcView GIS to identify polygons that represent poultry facilities. The order of selection was found to be compactness followed by length-width ratio and polygon centroid analysis. A data set that included thirty 35-mm slide images randomly selected from the Rockingham County data set, which contained over 2000 slides, was used to evaluate the automated procedure. The slides contained 182 poultry houses previously identified through manual procedures. Seven facilities were missed and 175 were correctly identified. Ninety-seven percent (97%) of existing poultry facilities were correctly identified which compares favorably with the 97 % accuracy resulted by manual procedures. . The manual procedure described by Mostaghimi, et. al.(1999) only gave the center coordinates for each poultry facility. The automated procedure not only gives the center coordinate for each poultry building but also gives estimates for geometric parameters area, length and width along with an estimate of the capacity of building (i.e. number of birds), and waste load generated by birds including nutrient and bacteria content. The nutrient and bacteria load generated by each poultry facility is important information for conducting TMDL studies currently being developed for impaired Virginia streams. The information is expected to be very helpful to consultants and state agencies conducting the studies. Agricultural support agencies such as USDA/NRCS and USDA/FSA, Extension Service, consultants, etc. will find the information very helpful in the development of implementation plans designed to meet TMDL target water quality goals. The data also should be useful to Water Authorities for selection of appropriate treatment of water supplies and to county and local government jurisdictions for developing policies to minimize the degradation of water supplies.
Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

18

Taylor, Jeremy. "Iron Age and Roman landscapes in the East Midlands : a case study in integrated survey." Thesis, Durham University, 1996. http://etheses.dur.ac.uk/1566/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Millinor, William A. "Digital Vegetation Delineation on Scanned Orthorectified Aerial Photography of Petersburg National Battlefield." NCSU, 2000. http://www.lib.ncsu.edu/theses/available/etd-20001123-131211.

Full text

Abstract:

I developed a new methodology to produce an orthorectified mosaic and a vegetation database of Petersburg National Battlefield using mostly digital methods. Both the mosaic and the database meet National Map Accuracy Standards and proved considerably faster than traditional aerial photograph interpretation methods. I classified vegetation polygons to the formation level using the Nature Conservancy?s National Vegetation Classification System. Urban areas were classified using Mitchell?s Classification Scheme for Urban Forest Mapping with Small-Scale Aerial Photographs. This method reduced the production time by 2/3, compared to traditional methods. It also reduced the chance of user error because re-tracing of the linework is not required.

My method started with scanning 75 aerial color IR photos, provided by Petersburg National Battlefield, at 600 dpi. Erdas Imagine was used to rectify the images using United States Geological Service (USGS) Digital Elevation Models (DEM) and black and white USGS Digital Orthophoto Quarter Quadrangles (DOQQ) as reference. The images were then mosaiced to create a seamless color infrared orthorectified basemap of the park. The vegetation polygons were drawn onscreen using ArcMap from Environmental Systems Research Institute, Inc. (ESRI) with the color, orthorectified mosaic as a background image. Stereo pairs of the aerial photos were referenced as needed for clarification of the vegetation. I used a minimum mapping unit (mmu) of 0.2 hectares, which exceeds guidelines defined by the United States Geological Survey ? National Park Service Vegetation Mapping Program. This methodology is easily learned quickly and has already been applied to several other studies.

The production of an orthorectified mosaic, created during the process, from the aerial photographs greatly increases the value of the photographs at little additional cost to the user. The orthorectified basemap can then be used as a backdrop for existing data layers or it can be used to create new GIS data layers. I used a minimum mapping unit (mmu) of 0.2 hectare, which exceeds guidelines defined by the United States Geological Survey-National Park Service Vegetation Mapping Program

Traditionally, vegetation polygons are delineated on acetate for each photograph. The linework on the acetates is then transferred to a basemap using a zoom transfer scope or other transfer instrument. The linework is traced again to digitize it for use in a GIS program. This process is time consuming, and the linework is drawn three times. The redundant tracing increases the chance of user error. My new methodology requires that polygons be delineated only once. I wanted to avoid using the zoom transfer scope and to avoid the redundant linework.

A total of 228 polygons were delineated over 20 separate vegetation and land cover classes with an overall thematic accuracy of 87.42% and a Kappa of .8545. Positional accuracy was very good with a RMSE of 1.62 meters in the x direction and 2.81 meters in the y direction. The Kappa and RMSE values compare favorably with accuracies obtained using traditional vegetation mapping methods.

APA, Harvard, Vancouver, ISO, and other styles

20

Deriu, Davide. "The photogenic city : aerial photography and urban visions in Europe, 1914-1945." Thesis, University College London (University of London), 2004. http://discovery.ucl.ac.uk/1446792/.

Full text

Abstract:

The thesis investigates the relationship between photography and urban visions in Europe in the period 1914-1945. It focuses in particular on the impact of the aerial gaze upon the ways in which the modern city was perceived and represented. The theoretical background for this inquiry is provided by contemporary debates on photography and visual culture, which are brought to bear on the study of urban representations. The main body of the argument is divided into three parts: 'Aerial Inspections', 'Aerial Imaginations', and 'Aerial Illustrations'. The first part discusses the urban imagery produced within the field of air reconnaissance photography, with particular regard to World War II. The second part charts the rise of an aerial imagination in avant-garde photography, which reconfigured the city as the site and subject of a modern way of seeing. The third part looks at how 'applied' aerial photography was instrumental to illustrate urban visions across various discursive fields, namely tourism, journalism, and urbanism; this section concludes with a case study on the aerial imagery of interwar London, based on the production of a leading air survey company. Besides pinpointing the modes of representation specific to each of these practices, the thesis also describes the traffic of images and the flow of meanings that occurred across their boundaries. It is finally argued that a new urban visuality was the result of the procedures introduced by aerial photography: the photogenic city emerged as a contested field of representation marked out by an underlying tension between spectacle and surveillance.

APA, Harvard, Vancouver, ISO, and other styles

21

Grotefendt, Richard. "Accurate and cost-effective natural resource data from super large scale aerial photography /." Thesis, Connect to this title online; UW restricted, 2005. http://hdl.handle.net/1773/5454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Brimicombe, A. J. "Uncertainty and fitness-for-use in handling aerial photographic interpretive data in geographical information systems." Thesis, Hong Kong : University of Hong Kong, 1994. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14394820.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Valinger, John. "Automatic rooftop segment extraction using point clouds generated from aerial high resolution photography." Thesis, Umeå universitet, Institutionen för datavetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-119123.

Full text

Abstract:

Automatically extracting rooftop information from aerial photographs using point cloud generations tools and point cloud plane segmentation algorithms is a interesting and challenging topic. Previous studies on rooftop extraction have used airborne Light Detection And Ranging (LiDAR) derived point clouds or point clouds generated from photographs taken specifically for point cloud generation. We have used photographs taken from the Swedish National Land Survey database to generate point clouds using stereo-matching for rooftop segmentation. Aerial imagery from this data is both cheap and has nationwide coverage. Point cloud generation tools are evaluated based on coverage, point cloud size, geographical precision and point density. We propose a novel combination of property map clipping and rooftop plane segmentation algorithms derived from aerial photography via point cloud generation after comparing promising segmentation algorithms. We conclude that the point clouds generated from the aerial imagery are not sufficient for the implemented method for completely extracting all rooftop segments on a building in an urban environment.

APA, Harvard, Vancouver, ISO, and other styles

24

Niu, Xutong. "Highway extraction from high resolution aerial photography using a geometric active contour model." The Ohio State University, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=osu1101833084.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Meadows, P. L. "The applications of aerial photography, photogrammetry and photo-interpretation in the planning process." Master's thesis, Faculty of Engineering and the Built Environment, 2021. http://hdl.handle.net/11427/33400.

Full text

Abstract:

To date aerial photography and associated photogrammetric and photo-interpretation techniques have played but a limited role in the planning process. In this study their dual role (i) as a base medium and (ii) as a source of data is investigated bearing in mind the requirements of planning data and certain inherent defects of conventional maps in the planning process. Having considered certain pertinent technical aspects of aerial photography and associated techniques, especially modern developments such as orthophotos, use of multi-emulsion photography, automated data extraction and automated data processing techniques, the application of these techniques is discussed in greater detail in respect of the dual role mentioned earlier. Aerial photographs are shown to be of considerable value to the planner as an analytic tool and a powerful source of data when dealing with such topics as feasibility studies, land use, resource surveys, urban and regional research and analysis, urban history, urban and rural administration, site evaluation, transportation and other. branches of engineering, urban sociology and economics, as well as urban aesthetics. Aerial photographic data adequately meets the data requirements of the planning process and furthermore lends itself to modern automatic data processing methods. The modern improved forms of photography, i.e. photomaps, orthophotos, etc. have definite advantages over conventional maps insofar as a base medium in planning is concerned, and the wider use of aerial photographs and products is anticipated when planners become more aware of their universal application and versatility.

APA, Harvard, Vancouver, ISO, and other styles

26

Korpela, Ilkka. "Individual tree measurements by means of digital aerial photogrammetry." Helsinki : Finnish Forest Research Institute, Finnish Society of Forest Science, 2004. http://catalog.hathitrust.org/api/volumes/oclc/55872310.html.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Knapp, Paul Aaron. "THE USE OF LARGE-SCALE AERIAL PHOTOGRAPHY FOR DETECTING CHANGES OF AN ARID RANGELAND IN SOUTHWESTERN ARIZONA." Thesis, The University of Arizona, 1985. http://hdl.handle.net/10150/292059.

Full text

Abstract:

Interpretation of large-scale color infrared and color aerial photography can be a labor and cost-effective means for inventorying and monitoring rangelands while maintaining accuracy. Ground measurements of vegetation cover at Organ Pipe Cactus National Monument were taken in 1975 and 1984. Large-scale (1:1200) color and color infrared aerial photo estimates were compared to these ground measurements through regression and correlation to check photo accuracy. Relationships between photo estimates and ground measurements of total vegetation and shrub cover were strong when using either film type. Color infrared photo estimates corresponded better with ground measurements for both tree cover and cactus cover than color photo estimates. Large-scale aerial photography is also useful for determining some of the causes of vegetation change. Evidence gathered from both sets of photos suggested that vegetation change at OPCNM was largely the result of domestic livestock removal and short-term climatic fluctuations.

APA, Harvard, Vancouver, ISO, and other styles

28

Park, Keith Marron. "The global-to-local search method: A systematic search procedure that uses the context of the textured layout to locate and detect low-contrast targets in aerial images." CSUSB ScholarWorks, 1993. https://scholarworks.lib.csusb.edu/etd-project/700.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Edwards, Esther. "An investigation into the use of aerial digital photography for monitoring coastal sand dunes." Thesis, Bath Spa University, 2001. http://researchspace.bathspa.ac.uk/1442/.

Full text

Abstract:

The coastal zone is a highly dynamic entity both spatially and temporally and when shoreline changes (and in particular retreat) occur on a hmnan time-scale, measurement of the rate of change becomes a pressing issue. This dynamism presents an excellent scenario for monitoring change using remote sensing techniques, and in the case of coastal sand dunes, where the requirement is to measure small scale changes such as erosion or accretion in the region of 10 or 20 m, aerial photography is the preferred source of remotely sensed data. The rapid developments in digital camera technology and real time satellite differential Global Positioning Systems have yielded new opportunities for mapping and monitoring environmental change when used with image processing and mapping software and state-of-the-art digital photogrammetric workstations. Despite the progress in digital technologies, however, there is still considerable lack of awareness on the part of potential users, and it is in response to this that the processing chain for data collection through to orthophoto production described here has been developed. This study explores the major issues that affect quality, mission logistics and cost and will demonstrate the methodology and application of digital techniques for producing georectified imagery and contoured orthophoto maps of coastal environments. This will be achieved through a series of case studies of dynamic dune environments in south-west England and France. Digital imagery was captured using a colour infrared Aerial Digital Photographic System and ground control was collected using differential Global Positioning Systems. This study seeks to assess the application of this imagery to coastal dune monitoring, putting these new techniques within the grasp of coastal dune managers, enabling them to make use of digital imagery captured to different specifications depending on the accuracy requirement of the end product. The results indicate that this type of imagery and the techniques used can provide the dune manager with information which would otherwise be too costly or time consuming to acquire. 2D rectification of the imagery provided maps of dune retreat and accretion with errors in the region of± 1.5m, and rectification to a higher order using 3D photogrammetric correction provided 1 :5000 contoured orthophotographs with mean xy errors in the region of 2. 5 m and mean elevation errors in the region of 1.5m.

APA, Harvard, Vancouver, ISO, and other styles

30

Bleier, Mary F. "Use of prior distributions from aerial photographs in forest inventory." Thesis, Virginia Tech, 1986. http://hdl.handle.net/10919/41543.

Full text

Abstract:

Bayesian estimates of gross cubic- foot volume per acre were computed for four stand types (plantation pine, natural pine. hardwood. and mixed wood stands) using aerial photo volume tables as the prior information source. Aerial photographs provided a reliable source of information even though most photographs were nearly five years old. For a given level of precision within a particular stand, Bayesian methods reduced the required field sample size up to 50% using all or half of the prior information available. Those priors which utilized a regression or a regression/topographic correction in the estimation of photo heights required less field information for the given precision level than those priors which used uncorrected or topographic corrected photo heights. In order to obtain meaningful gains in sample size reduction corrections to the estimated photo heights should be made. Although the uncorrected prior produced generally less biased estimates. the reduction in sample size was not as large as that observed using other prior types. Greater gains were attributed to the better accuracy of the prior distribution. Although Bayesian methods are biased, it appeared that these methods tempered severely biased prior distributions. In the hardwood stand for example, the average bias present in the photo volume data amounted to -140%. After combining the prior with the field sample, the greatest average bias was -50%. Bayesian methods performed better than the traditional estimation methods in terms of precision. In a one to one comparison. the Bayes standard error was consistently less than its non-Bayes counterpart. The one exception to this trend was the regression prior from the hardwood stand. The poor performance of the prior was due to the weak height regression correction equation. Modal priors utilized were not subject to the extreme input values for prior distribution development as their conservative empirical prior counterparts were. Less overall variation was observed 1n the estimated values. Under the conditions for mode selection set forth in this project, modal priors provided another good source of prior information.
Master of Science

APA, Harvard, Vancouver, ISO, and other styles

31

Smith, Scott R. "Aerial perspective and geography : an historical look at the use of aircraft to gain a sense of place /." Abstract Full Text (HTML) Full Text (PDF), 2009. http://eprints.ccsu.edu/archive/00000575/02/2016FT.htm.

Full text

Abstract:

Thesis (M.S.) -- Central Connecticut State University, 2009.
Thesis advisor: Cynthis Pope. "... in partial fulfillment of the requirements for the degree of Master of Science in Geography." Includes bibliographical references (leaves 77-81). Also available via the World Wide Web.

APA, Harvard, Vancouver, ISO, and other styles

32

Baxter, Kieran Andrew. "Topography and flight : the creative application of aerial photography and digital visualisation for landscape heritage." Thesis, University of Dundee, 2017. https://discovery.dundee.ac.uk/en/studentTheses/e22373db-adee-4bb1-9fbe-43691816ce85.

Full text

Abstract:

Aerial photography and digital visualisation technologies are commonly used to reveal and interpret archaeological sites and landscapes. These methods afford a clarity and overview that has considerable advantages in heritage visualisation. Despite this, both technologies offer a view that is distanced from the grounded experiences that are integral to heritage sites and landscapes. This tension, between visualisation technologies and lived experience, is significant because the experiences of visiting these places are a valuable common platform - shared by specialists and general audiences alike - for communicating archaeological narratives. Beyond this, such tensions have been central to debates within landscape archaeology about how embodied perspectives on the one hand, and the conventions of visual representation on the other, might affect archaeological interpretations. This thesis investigates the hypothesis that creative practice can serve to bridge the gap between visualisation technologies and lived experience, ultimately providing more powerful and meaningful visualisations of landscape heritage. This is possible because aerial and digital visualisations can and do go beyond topographical representation and respond to the aesthetic and emotive dimensions of landscape. Aerial photographs and digital models resist the visual modes of modernity despite their technological premise. The meanings that they transmit draw not only from the visual language of aerial photography and digital media but also from the viewer's prior experience of landscape and flight. It is within this context that this study attempts to better understand the relationship between visualisation technologies, creative practice, and the lived experience of landscape. To do this the author adopts the role of research-practitioner in order to explore and demonstrate the arguments through the creative application of aerial photography and digital visualisation technologies. This practice combines methods from archaeological survey, and approaches from visual effects filmmaking, with an aesthetic inspired by artist-photographers like Marilyn Bridges, Emmet Gowin and Patricia Macdonald. These creative practitioners have adopted the aerial view to portray landscapes with intimacy, agency and dynamism. The practice aims to work from an immersed or insider's view, drawing influence from Tim Ingold's notion of the "dwelling perspective". A main case study is undertaken at the Iron Age hillfort site of the Caterthuns in Angus, Scotland, with supporting case studies at the prehistoric site of Links of Notlland in Orkney and additional hillfort sites in Strathearn. Through this hands-on experience the aim is to better understand how novel approaches to practice can improve landscape heritage visualisation in an interdisciplinary context.

APA, Harvard, Vancouver, ISO, and other styles

33

Kunz, Matthias. "Elevation changes of mountain glaciers in the Antarctic Peninsula using ASTER-controlled archival aerial photography." Thesis, University of Newcastle upon Tyne, 2014. http://hdl.handle.net/10443/2392.

Full text

Abstract:

Over the last 50 years a significant increase in the atmospheric and upper ocean temperatures in the Antarctic Peninsula (AP) region has been observed. As a result major ice-shelves have retreated during the 20th century. In connection, glaciers have accelerated and an increased dynamic ice mass loss is observed, especially over the last decade. Despite these major changes, an exact quantification of ice mass changes of the AP, with its roughly 1000 glaciers, is not available. Almost no long-term (multi-decadal) glacier mass balance records for the AP exist and in-situ measurements are rare. On the other hand, the United States Geological Survey (USGS) and British Antarctic Survey (BAS) archives hold a large number of historic aerial stereo-photographs of the AP, dating back to the early 1940s. These images contain a valuable source of information and have been used to demonstrate widespread retreat of glaciers in this region. Less effort has been made so far to use this stereo-photography for the extraction of elevation data to compare it with recent elevation information to determine glacier volume change from which mass changes may be estimated. This dissertation seeks to close this research gap and to extend the number of mass balance records for the AP, by investigating, measuring, and analysing historical glacier elevation change in the AP using digital elevation models (DEMs) derived from USGS and BAS airborne (1948-2005) and ASTER spaceborne (2001-2010) stereo imagery. To ensure reliable and accurate measurements of surface elevation change, extracted DEMs need to be registered in a precise manner. The lack of ground control information in the AP is a major obstacle for this and can result in inaccurate absolute orientations of DEMs. If uncorrected, possible offsets between DEMs introduce significant error and i can lead to an over- or underestimation of glacier change. Thus, in order to precisely co-register corresponding historic and modern DEMs an iterative robust least squares surface matching algorithm was applied. The underlying surface matching approach was previously developed for small-scale coastal erosion studies at Newcastle University. Within the context of this work it has been successfully modified and improved to enable large scale glacier change assessment in areas of steep topography which is typical for the AP. For a total of 12 glaciers in the AP, located along the western coast between 64° and 71° S, DEMs from the historic archive stereo-imagery were successfully extracted and combined with DEMs derived from modern aerial and ASTER satellite imagery. The improved surface matching approach allowed precise co-registration of these DEMs and enabled the accurate measurement of glacier surface mass balance at the lower portion of the glaciers. Widespread frontal glacier surface lowering, of up to 50 m, has been observed on 12 glaciers with a mean lowering rate of 0.28 ± 0.03 m/yr over a period of 37 years (1970-2007). Higher rates, of up to 0.6 m/yr, were observed in the north-western Peninsula. Two glaciers which have multi-epoch coverage show a significantly larger-than-average lowering since about 1990. These results are in close correspondence with an increase in positive degree days over the last four decades and suggest that much of this lowering can be attributed to atmospheric forcing. However, the observed spatial and temporal variations in the lowering rates suggests that the pattern of surface change is not a simple one and that a regional upscaling is not straight forward. The glaciers represent only 1.2 % of all estimated glaciers in the AP and only the glacier fronts (~20 % of each glacier) were studied. Observations also show an elevation increase at some higher altitude locations within a few km of the glacier fronts, raising the potential that the lowering may have been at least partially compensated for by increased high-altitude accumulation.

APA, Harvard, Vancouver, ISO, and other styles

34

Fyfield, Paul Hagen. "Transportation and Land Use Patterns: Monitoring Urban Change Using Aerial Photography, Portland, Oregon 1925-1945." PDXScholar, 2003. https://pdxscholar.library.pdx.edu/open_access_etds/2242.

Full text

Abstract:

American urban neighborhoods are a patchwork; the spatial arrangement of types is a reflection of the dominant transportation technology at the time of their development. The earliest suburban areas were made accessible by fixed route systems such as the electric streetcar, followed by the widespread adoption of the automobile; each transportation epoch resulted in characteristic patterns of land use. This study uses aerial photographic coverage of Portland, Oregon from the years 1925, 1936, and 1945, a time of decline for the once popular trolley lines and dramatic increase in automobile usage, to monitor change within the residential areas of Portland's east side over a twenty year period. Classic economic models of the time acknowledged transportation as a force shaping the city; modem ideas in urban planning such as Traditional Neighborhood Design and Transit Oriented Development look to pre-automobile urban form as a means to reduce automobile use and its negative implications. This study uses variables of housing density and street connectivity derived from the aerial photography; the measured values of these variables are then considered for their spatial and temporal distribution using statistical comparisons. The results are compared to ideas within the urban models and current thinking about urban morphology. While generally consistent with the expected patterns, deviations and differences between the two variables are considered for their implications. Models offer a simplified version of the growth of American cities, considering only a few of the many aspects of a dynamic environment. By isolating on these variables of density and connectivity, a greater understanding of their role in arriving at the modem residential urban environment may be reached, and this understanding can add to the discourse in current planning debates.

APA, Harvard, Vancouver, ISO, and other styles

35

Metzler, Jacob W. "Use of Multi-temporal IKONOS and LANDSAT ETM+ Satellite Imagery to Determine Forest Stand Conditions in Northern Maine." Fogler Library, University of Maine, 2004. http://www.library.umaine.edu/theses/pdf/MetzlerJW2004.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Wilhite, Jerry W. "Use of infrared aerial photographs to identify and assess habitat needed by native fish in rivers." Laramie, Wyo. : University of Wyoming, 2007. http://proquest.umi.com/pqdweb?did=1445041571&sid=1&Fmt=2&clientId=18949&RQT=309&VName=PQD.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Wolters, Dustin Joseph. "Assessment of Corn Plant Population at Emergence from Processed Color Aerial Imagery." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1437666741.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Rosenberg, Abigail Stella. "An Evaluation of a UAV Guidance System with Consumer Grade GPS Receivers." Diss., The University of Arizona, 2009. http://hdl.handle.net/10150/194506.

Full text

Abstract:

Remote sensing has been demonstrated an important tool in agricultural and natural resource management and research applications, however there are limitations that exist with traditional platforms (i.e., hand held sensors, linear moves, vehicle mounted, airplanes, remotely piloted vehicles (RPVs), unmanned aerial vehicles (UAVs) and satellites). Rapid technological advances in electronics, computers, software applications, and the aerospace industry have dramatically reduced the cost and increased the availability of remote sensing technologies.Remote sensing imagery vary in spectral, spatial, and temporal resolutions and are available from numerous providers. Appendix A presented results of a test project that acquired high-resolution aerial photography with a RPV to map the boundary of a 0.42 km2 fire area. The project mapped the boundaries of the fire area from a mosaic of the aerial images collected and compared this with ground-based measurements. The project achieved a 92.4% correlation between the aerial assessment and the ground truth data.Appendix B used multi-objective analysis to quantitatively assess the tradeoffs between different sensor platform attributes to identify the best overall technology. Experts were surveyed to identify the best overall technology at three different pixel sizes.Appendix C evaluated the positional accuracy of a relatively low cost UAV designed for high resolution remote sensing of small areas in order to determine the positional accuracy of sensor readings. The study evaluated the accuracy and uncertainty of a UAV flight route with respect to the programmed waypoints and of the UAV's GPS position, respectively. In addition, the potential displacement of sensor data was evaluated based on (1) GPS measurements on board the aircraft and (2) the autopilot's circuit board with 3-axis gyros and accelerometers (i.e., roll, pitch, and yaw). The accuracies were estimated based on a 95% confidence interval or similar methods. The accuracy achieved in the second and third manuscripts demonstrates that reasonably priced, high resolution remote sensing via RPVs and UAVs is practical for agriculture and natural resource professionals.

APA, Harvard, Vancouver, ISO, and other styles

39

Blinn, Christine Elizabeth. "Estimation of Important Scenic Beauty Covariates from Remotely Sensed Data." Thesis, Virginia Tech, 2000. http://hdl.handle.net/10919/33656.

Full text

Abstract:

The overall objective of this study was to determine if remotely sensed data could be used to model scenic beauty. Terrestrial digital images from within forest stands located in Prince Edward Gallion State Forest near Farmville, Virginia were rated for their scenic beauty by a group of students to obtain scenic beauty estimates (SBEs). Since the inter-rater reliability was low for the SBEs, they were not used in the modeling efforts. Instead, stand parameters (collected on tenth acre plots) that have been used in scenic beauty prediction models, like mean diameter at breast height (dbh), were the dependent variables in regression analyses. A color-infrared aerial photograph from the National Aerial Photography Program (NAPP) was scanned to achieve a pixel ground resolution of one meter. The digital aerial photograph was rectified and used as the remotely sensed data. Since the aerial photograph was taken in April, only conifer stands were used in the analyses. Summary statistics were obtained from a 23 by 23 window around plot locations in three images: the original image, a texture image created with the variance algorithm and a 7x7 window, and the first principal component image. The summary statistics were used as the independent variables in regression analyses. The mean texture digital number for the green band predicted the mean dbh of a plot with an R2 of 0.623. A maximum of 44.3 and 27.4 percent of the variability in trees per acre and basal area per acre, respectively, was explained by the models developed in this study. It seems unlikely that the remotely sensed forest stand variables would perform well as surrogates for field measurements used in scenic quality models.
Master of Science

APA, Harvard, Vancouver, ISO, and other styles

40

Moore, Sue E. "Cetacean habitats in the Alaskan Arctic /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 1997. http://wwwlib.umi.com/cr/ucsd/fullcit?p9823707.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Williams, Allan Robert. "British photographic intelligence during the Second World War : a study of Operation Crossbow." Thesis, University of Edinburgh, 2016. http://hdl.handle.net/1842/22046.

Full text

Abstract:

In 2013 the candidate published Operation Crossbow: The Untold Story of Photographic Intelligence and the Search for Hitler’s V Weapons. Through a detailed examination of the relevant primary sources – including aerial photography recently released to the National Collection of Aerial Photography in Edinburgh - this book investigates the role of British photographic interpretation in the hunt for German V-weapons during Operation Crossbow. In so doing, it provides a wealth of information on such matters as the wartime development of photographic interpretation, the techniques used by the interpreters, the personalities involved, the significance of photographic intelligence to the operation, and the wider politics of wartime intelligence. In particular, it contests some of the claims made by R. V. Jones in his memoir, Most Secret War (1978), about the role of photographic interpretation in the Crossbow investigation. It also demonstrates the wider importance of photographic intelligence in the British military history of the war and offers some explanation as to why this has become a ‘missing dimension’ of wartime intelligence studies. The critical review seeks to provide an academic superstructure for the book, which was intended for a general readership, and demonstrates that the research included therein is commensurate with that required for a PhD.

APA, Harvard, Vancouver, ISO, and other styles

42

Hui, Lin Ning. "THE USE OF LARGE SCALE COLOR AERIAL PHOTOGRAPHY TO MONITOR CATTLE GRAZING IN MESQUITE GRASSLANDS, SOUTHERN ARIZONA." Thesis, The University of Arizona, 1986. http://hdl.handle.net/10150/275514.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Holt, Ryan Samuel. "Three enabling technologies for vision-based, forest-fire perimeter surveillance using multiple unmanned aerial systems /." Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd1894.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Pryor, Logan S. "Land-cover mapping in an agriculture zone using simulated Sentinel-2 data." Thesis, Lethbridge, Alta. : University of Lethbridge, Dept. of Geography, c2012, 2012. http://hdl.handle.net/10133/3367.

Full text

Abstract:

Remote sensing technologies are used to assist in the mapping and monitoring of land cover in space and time. The European Space Agency’s (ESA) upcoming Sentinel-2 MultiSpectral Instrument (MSI) to be launched in 2013 has improved spatial and spectral properties compared to the current large-swath medium-resolution satellite sensors. Prior to the deployment of future sensors it is important to simulate and test the sensor data to evaluate the sensor's potential performance in producing the existing data products and develop new algorithms. This study simulated Sentinel-2 MSI data from airborne hyperspectral data over an agriculture area in northern Alberta, Canada. The standard Sentinel-2 MSI land-cover product was evaluated by comparing it to one created from the standard Landsat 5 TM and SPOT 5 HRV data products. Furthermore the standard Sentinel-2 MSI water column content band configuration and algorithm was evaluated for atmospheric correction purposes.
xi, 90 leaves : col. ill. ; 29 cm

APA, Harvard, Vancouver, ISO, and other styles

45

Bredenkamp, Adolf Friedrich Ludwig. "Development and control of a 3-axis stabilised platform." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/380.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Streckfuss, James A. "Eyes All Over the Sky: The Significance of Aerial Reconnaissance in the First World War." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1333736829.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Spencer, Darren W. "The Unmanned Aerial Systems (UASs) Industry and the Business Impacts of the Evolution of the Federal Regulatory Environment." Scholar Commons, 2018. https://scholarcommons.usf.edu/etd/7576.

Full text

Abstract:

Despite the explosion of popularity of UASs, and the recognition that such systems must find a way to safely operate alongside manned aviation, a literature review by this author as well as interviews with three commercial aerial photography companies in Tampa Bay, Florida, indicate that regulatory restrictions are still the greatest obstacle to law abiding commercial UAS operators. It can take six to eight months with a backlog of 12,000 waiver applications to get either a Part 333 or Part 107 exemption, which grants FAA permission for a commercial operator to fly a UAS inside controlled airspace (Gardner, 2018). A manned pilot can file a flight plan and hover a helicopter over the same area in just a few hours. The purpose of this research was to determine what industry experts perceive the future of UAS regulations hold, and how the industry will be impacted in both the short term of 5 years and less, and long-term of 5 years or more. UAS industry expert interviews were conducted in the “reflection of the meaning”, semi-structured style, with each interviewee given the latitude to discuss topics as they came to mind. A preset approved bank of questions helped to guide the interview, but in many cases as experts in the field, the interviewees naturally discussed the topics covered in the preset questions and the interview adapted to avoid unnecessary repetition. One interview was conducted in-person, but the rest were via phone calls due to geographical separation.

APA, Harvard, Vancouver, ISO, and other styles

48

Awwad, Waleed Abdulaziz. "Land cover mapping a comparison between manual digitizing and automated classification of black and white historical aerial photography /." [Gainesville, Fla.] : University of Florida, 2003. http://purl.fcla.edu/fcla/etd/UFE0000634.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Karlsten, Annika. "Quantifying the physical effects of stream restoration: With unmanned aerial vehicles and geographic information systems." Thesis, Umeå universitet, Institutionen för ekologi, miljö och geovetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-160181.

Full text

Abstract:

Stream restoration efforts often aim at restoring the physical complexity in streams, as an increased habitat heterogeneity is believed to increase biodiversity. It is important to quantify the physical complexity of streams before and after restoration, to know what actions are needed, and to monitor the results of the restoration. The use of unmanned aerial vehicles (UAVs) and geographic information systems (GIS) for data acquisition is rapidly increasing, and the use of UAVs and GIS could facilitate the monitoring process. The aim of this study was to determine how the spatial complexity in streams can be determined by using UAVs and GIS. The physical features and the spatial complexity were quantified in five reaches in the Lögde River, pre- and post-restoration, by analyzing UAV photos in a GIS program. Three of six reach descriptive metrics, and three of seven complexity metrics, were shown significantly different after restoration. To validate the GIS analyzing method, a qualitative comparison of data from the GIS analysis to field survey data was conducted. The GIS method was shown effective for distinguishing morphological features on a larger spatial scale, and to show the spatial distribution of instream features, such as wood pieces and boulders. The accuracy when digitizing the bankfull edge of the stream was low on small scales, and the method likely underestimates the number of wood pieces and boulders in the streams. Preferable camera settings and weather conditions to avoid blurry UAV photos, and thereby enhance the accuracy of the GIS analysis, are discussed.

APA, Harvard, Vancouver, ISO, and other styles

50

Koch, Frank Henry Jr. "A Comparison of Digital Vegetation Mapping and Image Orthorectification Methods Using Aerial Photography of Valley Forge National Historical Park." NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20010417-180334.

Full text

Abstract:

In recent years, mapping software utilizing scanned?or ?softcopy??aerial photographs has become widely available. Using scanned photos of Valley Forge (PA) National Historical Park, I explored some of the latest tools for image processing and computer-based vegetation mapping. My primary objective was to compare different approaches for their efficiency and accuracy. In keeping with the USGS-NPS Vegetation Mapping Program protocol, I classified the park?s vegetation according to The Nature Conservancy?s National Vegetation Classification System (NVCS).

Initially, I scanned forty-nine 1:6000 color-infrared air photos of the area at 600 dpi using an Epson desktop scanner. I orthorectified the images by two different methods. First, I did so on a single-image basis using ERDAS Imagine. In this approach, United States Geological Survey (USGS) Digital Ortho Quarter Quadrangles (DOQQ) and a 10-meter Digital Elevation Model (DEM) served as references for between seven and twelve ground control points per photo. After achieving a root mean square error (RMSE) of less than 1 meter for an image, I resampled it into an orthophoto. I then repeated the process using Imagine Orthobase. Via aerial triangulation, Orthobase generated an RMSE solution for the entire block of images, which I resampled into orthophotos using a batch process.

Positional accuracies were remarkably similar for image mosaics I created from the single-image as well as the Orthobase orthophotos. For both mosaics, planimetric x-coordinate accuracy met the U.S. National Map Accuracy Standard for Class 1 maps, while planimetric y-coordinate accuracy met the Class 2 standard. However, the Orthobase method is faster?reducing process time by 50%?and requires 20% (or less) of the ground control points necessary for the single-image method.

I delineated the park?s vegetation to the formation level of the NVCS. Using ESRI ArcMap, I digitized polygons of homogeneous areas observed from the orthophotos. This on-screen mapping approach was largely monoscopic, though I verified some areas using a scanning stereoscope and the original hard-copy photos. The minimum mapping unit (MMU) was 0.5 acres (ac), smaller than that recommended by the USGS-NPS protocol. Based on field data, thematic accuracy for this map met the National Map Accuracy Standard of 80%. Misestimation of the hydrologic period of certain polygons resulted in some classification errors, as did confusion between evergreen and deciduous vegetation.

In addition to orthophotos, Orthobase creates a stereo block viewable in ERDAS Stereo Analyst, a digital stereoscopic software package. Using Crystal Eyes? eyewear and a high-refresh-rate monitor, a user can observe imagery full screen, three-dimensionally. Features delineated on the images are stored in ESRI shapefile format. I created a preliminary vegetation map at the alliance level of the NVCS with this software. Thematic accuracy of this map will be known when assessment is completed this summer. Notably, the classification scheme has required revision to accommodate the anthropogenically altered landscape of Valley Forge.

Nevertheless, it is clear that Stereo Analyst offers advantages for vegetation and other types of mapping. Stereoscopic view and sharp zoom-in capabilities make photo interpretation straightforward. Because features are delineated directly into a GIS, Stereo Analyst cuts process time by 70% and avoids two steps that can introduce errors in conventional mapping methods (i.e., transfer to map base and digitizing). Perhaps most importantly, joint use of Orthobase and Stereo Analyst allows simultaneous orthophoto creation and GIS data collection; in contrast, the ArcMap approach requires finished orthophotos before features can be delineated. Ultimately, though, both monoscopic and stereoscopic methods have roles in vegetation mapping projects. The level of detail required for the project should determine which technique is most appropriate.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic 'Aerial photography in geomorphology'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles