Dissertations / Theses on the topic 'AFL player'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'AFL player.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Pink, Matthew Andrew. "Relationships between AFL player off-field activity, player characteristics, the club environment, and on-field engagement." Thesis, Australian Catholic University, 2015. https://acuresearchbank.acu.edu.au/download/5a778c5c73591043299bd418bd6f1fbcd970e654b16345fecff77a1c56b7125f/4887986/Pink_2015_AFL_Player_Off_field_Activity.pdf.
Full textCampbell, Emma E. "Relocation Stories experiences of Indigenous Footballers in the AFL /." Full-text, 2008. http://eprints.vu.edu.au/1993/1/emma_campbell.pdf.
Full textCampbell, Emma E. "Relocation Stories: experiences of Indigenous Footballers in the AFL." Thesis, Full-text, 2008. https://vuir.vu.edu.au/1993/.
Full textPEÑA, VANESSA NICOLE. "KNEE INJURIES IN FEMALE SOCCER PLAYERS: A FOCUS ON THE ACL." Thesis, The University of Arizona, 2016. http://hdl.handle.net/10150/613415.
Full textКравчук, С. В. "Дослідження впливу відновлювальних джерел електроенергії на режим роботи електричних мереж." Thesis, ВНТУ, 2016. http://conferences.vntu.edu.ua/index.php/all-feeem/all-feeem-2016/paper/view/403.
Full textThe method for finding optimal places to connect and capacity to generate renewable electricity. Showing their impact on the normal mode of electrical networks.
Beukman, Theunis Steyn. "Tune-all wideband planar filters for KAT-7." Thesis, Stellenbosch : Stellenbosch University, 2011. http://hdl.handle.net/10019.1/17791.
Full textENGLISH ABSTRACT: A new type of wideband lters, with tunability in both the centre frequency and bandwidth, is presented in this thesis. These lters are based on perturbed ring-resonators in cascade, while varactor diodes are used for electronic tuning. The Karoo Array Telescope (KAT-7) requires a front-end lter that has the ability for ne-tuning the response after fabrication, in order to obtain the designed ltering response. Not only are tune-all characteristics required, but also wide bandwidth, at passband, high selectivity and implementation in microstrip technology. In this thesis an extensive investigation of both tunable and wideband lters is done, in order to nd a possible solution for the KAT-7 speci cations. Following this investigation, it is concluded that no suitable design approach for tune-all wideband lters, implemented in microstrip, exists in current literature. Therefore, this thesis proposes a new type of lter along with the development of a complete design procedure. Two lters are designed with this procedure to achieve the required passband from 1.2 to 1.95 GHz (i.e. a fractional bandwidth of 49%). In the rst lter design, with a network consisting of 4 cascaded ltering-sections, the centre frequency is 5% tunable and the bandwidth 17.5%. With the second lter consisting of 6 cascaded ltering-sections, higher selectivity is achieved but with lower return loss. Here the centre frequency is 8.5% tunable and the bandwidth 18.8%. The theoretical results are validated with the fabrication of both lters. This design is very unique in that it achieves wide bandwidth, is realisable in microstrip and most importantly is tunable in both the centre frequency and bandwidth. An advantage of this design procedure is that full wave simulations are minimal, due to the complete circuit models used for optimisation.
AFRIKAANSE OPSOMMING: 'n Nuwe soort van wye-band lters, met verstelbaarheid in beide senter frekwensie en bandwydte, word voorgelê in hierdie tesis. Hierdie lters is gebaseer op versteurde ringresoneerders in kaskade, terwyl varaktordiodes gebruik word vir elektroniese verstelling. Die Karoo Array Telescope (KAT-7) vereis 'n voorkant lter wat die vermoë het vir die instemming van die respons na fabrikasie, sodat die geontwerpde lter respons behaal kan word. Nie net word verstel-als eienskappe vereis nie, maar ook wye bandwydte, plat deurlaatband, hoë selektiwiteit en implimentering in mikrostrook tegnologie. In hierdie tesis is 'n veelomvattende ondersoek gedoen van beide verstelbare en wyeband lters, sodat 'n moontlike oplossing vir die KAT-7 spesi kasies gevind kan word. Na aanleiding van hierdie ondersoek, is die gevolgtrekking dat daar geen gepaste ontwerp benadering vir verstel-als wye-band lters, wat geïmplimenteer is in mikrostrook, in huidige literatuur bestaan nie. Daarom stel hierdie tesis, saam met die ontwikkeling van 'n volledige ontwerp prosedure, 'n nuwe tipe lter voor. Twee lters is ontwerp met hierdie prosedure om die vereiste deurlaatband vanaf 1.2 tot 1.95 GHz (dit is 'n fraksionele bandwydte van 49%) te behaal. In die eerste lter ontwerp, met 'n netwerk wat uit 4 kaskade lter-seksies bestaan, is die senter frekwensie 5% verstelbaar en die bandwydte 17.5%. Met die tweede lter bestaande uit 6 kaskade lter-seksies, word hoër selektiwiteit behaal maar met laer eggoverswakking. Hier is die senter frekwensie 8.5% verstelbaar en die bandwydte 18.8%. Die teoretiese resultate is geldig bewys deur die fabrikasie van albei lters. Hierdie ontwerp is baie uniek in dat dit wye bandwydte behaal, is realiseerbaar in mikrostrook en mees belangrikste dat dit verstelbaar is in beide senter frekwensie en bandwydte. 'n Voordeel van hierdie prosedure is dat heelgolf simulasies minimaal is, a.g.v. die volledige stroombaan modelle wat gebruik word vir optimering.
Cabral, Guilherme Marieiro. "All optical Haar transform based on planar waveguides." Master's thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/18515.
Full textCom o constante evoluir das necessidades do ser humano nos últimos anos, a transmissão e armazenamento de dados para aplicações vídeo e media têm crescido exponencialmente, obrigando a uma procura incessante de novas soluções para optimizar a largura de banda. Com a finalidade de obter um processamento de imagem mais rápido, os métodos de compressão são uma importante ferramenta para reduzir os dados redundantes. Entre diversas técnicas de transformação para compressão, as transformadas baseadas em wavelets são as mais usadas devido à sua simplicidade e computação rápida. Relativamente a esta abordagem, dadas as suas vantagens, o processamento de imagem totalmente ótico é aqui realizado, sendo baseado na transformada de Haar. Dado que esta transformada de wavelet já provou os seus benefícios face a outros métodos de transformação para compressão, a sua implementação em estruturas óticas guiadas é obrigatória. Neste contexto, é introduzido Photonic Integrated Circuit (PIC), já que pode incluir vários componentes num único chip ótico. Entre a extensa lista de blocos de construção (BBs) disponíveis para esta integração fotónica, as estruturas de interferência multimodo (MMI) são apresentadas como solução para realizar a transformada ótica de Haar. O desenvolvimento de tal componente foi elaborado assim como a sua implementação num PIC, concretizando a transformada de Haar de primeira ordem. Utilizando os BBs de uma fábrica específica, o esquemático do circuito de uma solução adoptada foi também implementado.
With the evolution of the human needs in the last years, data transmission and storage for video and media applications have grown exponentially, demanding the search of new solutions for optimizing the bandwidth. In order to have faster image processing, compression methods are fundamental tools to decrease the redundant data. Among several transformation techniques for compression, wavelet-based transforms are the trendiest ones because of its simplicity and fast computation. Concerning this approach and given the advantages, all-optical image processing is here performed based on Haar Transform. Since this wavelet transform has shown its benefits when compared to other methods, its implementation in optical guided structures is mandatory. In this context, Photonic Integrated Circuit (PIC) is introduced since it can include different components into a single optical chip. Between the extensive list of building blocks (BBs) available for this photonic integration, the Multimode Interference (MMI) structure is presented as a possible solution to perform the optical Haar wavelet transform. The development of such a structure was done likewise its implementation into a PIC, performing the first order Haar. Using the BBs from a specific foundry, a layout of the circuit from an adapted Haar Transform solution was also made.
Lee, Hanny. "Kicking All Odds." Thesis, University of North Texas, 2014. https://digital.library.unt.edu/ark:/67531/metadc500075/.
Full textVerreth, Herbert. "Trismegistos Places: a geographical index for all Latin inscriptions." Epigraphy Edit-a-thon : editing chronological and geographic data in ancient inscriptions ; April 20-22, 2016 / edited by Monica Berti. Leipzig, 2016. Beitrag 13, 2016. https://ul.qucosa.de/id/qucosa%3A15475.
Full textHayles, James Russell Jackson John D. "Does an all-star premium exist in the NBA? an econometric analysis of NBA player salaries fom 1999-2006 /." Auburn, Ala., 2006. http://repo.lib.auburn.edu/2006%20Summer/Theses/HAYLES_JAMES_12.pdf.
Full textLayton, Gregory Scott. "Milford, Delaware, of all places ten stories by Gregory S. Layton /." Oxford, Ohio : Miami University, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=miami1082653836.
Full textCash, Mason Daniel. "Intentionality in action, looking for life in all the wrong places." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ59569.pdf.
Full textChen, Chao 1974. "A direct kinematic computation algorithm for all planar 3-legged platforms /." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33962.
Full textPlanar kinematic mapping expresses pole position and rotation angle of a planar displacement as a point in 3-dimensional projective space represented by 4 homogeneous coordinates. This provides a universal tool for kinematic analysis. Its application will be demonstrated in the derivation of a general algorithm for planar DK. For each type of PSGP, the problem is reduced to a 6th order univariate polynomial whose roots reveal all solutions. An example of a PSGP with 6 real assembly configurations is presented. Furthermore, this algorithm was implemented and tested exhaustively. A complete self-contained version, coded in C, is available at http://www.cim.mcgill.ca/∼paul/. It should be easy to customize and adapt to any given real time micro-controller application.
Layton, Gregory Scott. "Milford, Delaware, of all places: eight stories by Gregory S. Layton." Miami University / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=miami1082653836.
Full textRumbold, Kate Louise. "All the men and women merely players : quoting Shakespeare in the mid-eighteenth-century novel." Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.670136.
Full textLiang, Boying. "Studies of Ligand-Receptor Pairs Utilizing Polymerized Planar Supported Lipid Bilayers." Diss., The University of Arizona, 2013. http://hdl.handle.net/10150/311232.
Full textLevine, Graydon R. "All-NBA Team Voting Patterns: Using Classification Models To Identify How And Why Players Are Nominated." Ohio University Honors Tutorial College / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ouhonors1555329710517098.
Full textSnider, James Ralph. "Satellite motion around an oblate planet: a perturbation solution for all orbital parameters." Thesis, Monterey, California. Naval Postgraduate School, 1989. http://hdl.handle.net/10945/26751.
Full textHedlund, Maja. "What if we could tailor the knee-prevention for female soccer players on an individual level and guide them to a physique that can support them?" Thesis, Umeå universitet, Designhögskolan vid Umeå universitet, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-125682.
Full textBolt, Jeffrey M. "iPod, You-pod, We All Pod For Stress Relief:An Investigation of Mood-Management Through Digital Portable Music Players." Kent State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=kent1459350298.
Full textHaeger, Sandra, and Rebecca Simonson. "Ledares erfarenheter av preventiv neuromuskulär träning för en främre korsbandsskada hos flickfotbollsspelare mellan 14-16 år." Thesis, Uppsala universitet, Fysioterapi, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-311589.
Full textMahajan, Salil. "CCM3 as applied to an idealized all land zonally symmetric planet, Terra Blanda 3." Texas A&M University, 2004. http://hdl.handle.net/1969.1/1422.
Full textDu, Toit Jacques. "Playing time of professional senior rugby players across all levels of South African rugby, 2007 -2012: implications for transformation." Master's thesis, University of Cape Town, 2014. http://hdl.handle.net/11427/5927.
Full textIncludes bibliographical references.
A single governing body to govern South African rugby was formed in 1992. This allowed for changes to governmental policies to South African sport, resulting in South African sport being fully representative of the population. The South African Rugby Union (SARU) therefore has a continual challenge to make rugby fully representative at both provincial and national levels. Previously rugby has been dominated by white players at all levels. The SARU has implemented various programmes in order to accelerate the development of players of colour. Previously the success of these programmes has not been evaluated because the players representing different ethnic groups have not been quantified in a systematic way. The aim was to quantify playing time and playing numbers of South African professional rugby players of different ethnic groups from 2007 to 2012 at all professional levels (Springboks, Super Rugby, Currie Cup and Vodacom Cup). Quantifying playing time and playing numbers was done to establish changes in profile of South African rugby players across the given time period. Thus the efficacy of the SARU programmes to accelerate transformation was indirectly evaluated. A further aim was to determine if there had been a change in ethnic profiles between the various rugby unions from 2007 to 2012.
Vik, Jon. "Not All Goals Are Created Equal : Evaluating Hockey Players in the NHL Using Q-Learning with a Contextual Reward Function." Thesis, Linköpings universitet, Databas och informationsteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-175149.
Full textDyck, Paul Henry. "All the constellations of the storie, George Herbert's Temple and English seventeenth-century textual common places." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ59952.pdf.
Full textShelley, Brett. "Inverse position solutions, workspace, and resolved rate control of all possible 3-DOF parallel planar manipulators." Ohio : Ohio University, 1996. http://www.ohiolink.edu/etd/view.cgi?ohiou1178042286.
Full textSewell, Patrick Dale. "Centers all the way down: a study of centrality in the modern city." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/43594.
Full textMenezes, Josà Wally MendonÃa. "ImplementaÃao de porta lÃgicas Ãpticas com acoplador direcional nÃo linear triplo planar simÃtrico de fÃbras Ãpticas." Universidade Federal do CearÃ, 2006. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=189.
Full textNeste trabalho, portas lÃgicas Ãpticas sÃo propostas a partir da utilizaÃÃo de um acoplador direcional nÃo linear (NLDC) triplo planar simÃtrico de fibra Ãptica e com um dos guias operando como controle. Para tal fim, obtemos as caracterÃsticas de transmissÃo do acoplador e, em seguida, fizemos uma anÃlise do coeficiente de extinÃÃo e do fator de compressÃo. Inicialmente, investigamos o desempenho do acoplador proposto operando no regime CW e posteriormente utilizando pulsos ultracurtos, tipo sÃliton com 2ps de largura. Com o modelo proposto para o dispositivo, conseguimos efetivar portas lÃgicas AND, NAND, OR, XOR e NOT para um conjunto de fases aplicadas ao pulso de controle. As portas lÃgicas geradas com o dispositivo operando com sinais CW, apresentaram-se mais eficientes que as mesmas portas geradas com sinais pulsados.
In this work, optical logical gates are proposed starting from the use of a symmetric three-core nonlinear directional coupler (NLDC) of fiber optic and with one of the guides operating as control. For such end, we obtain the characteristics of transmission of the coupler and, soon afterwards, we made an analysis of the extinction ratio and of the compression factor. Initially, we investigated the acting of the proposed coupler operating in the regime CW and later using ultra short pulses, type sÃliton with 2ps of width. With the model proposed for the device, we got to execute logical gates AND, NAND, OR, XOR and NOT for a group of applied phases to the control pulse. The logical gates generated with the device operating with signs CW, they came more efficient than the same gates generated with soliton pulses.
Menezes, José Wally Mendonça. "Implementação de porta lógicas ópticas com acoplador direcional não linear triplo planar simétrico de fíbras ópticas." reponame:Repositório Institucional da UFC, 2006. http://www.repositorio.ufc.br/handle/riufc/12468.
Full textSubmitted by Edvander Pires (edvanderpires@gmail.com) on 2015-05-25T22:18:49Z No. of bitstreams: 1 2006_dis_jwmmenezes.pdf: 2170108 bytes, checksum: 0615686d0a317fa8d05e85006ca06e1b (MD5)
Approved for entry into archive by Edvander Pires(edvanderpires@gmail.com) on 2015-05-27T18:52:06Z (GMT) No. of bitstreams: 1 2006_dis_jwmmenezes.pdf: 2170108 bytes, checksum: 0615686d0a317fa8d05e85006ca06e1b (MD5)
Made available in DSpace on 2015-05-27T18:52:06Z (GMT). No. of bitstreams: 1 2006_dis_jwmmenezes.pdf: 2170108 bytes, checksum: 0615686d0a317fa8d05e85006ca06e1b (MD5) Previous issue date: 2006
In this work, optical logical gates are proposed starting from the use of a symmetric three-core nonlinear directional coupler (NLDC) of fiber optic and with one of the guides operating as control. For such end, we obtain the characteristics of transmission of the coupler and, soon afterwards, we made an analysis of the extinction ratio and of the compression factor. Initially, we investigated the acting of the proposed coupler operating in the regime CW and later using ultra short pulses, type sóliton with 2ps of width. With the model proposed for the device, we got to execute logical gates AND, NAND, OR, XOR and NOT for a group of applied phases to the control pulse. The logical gates generated with the device operating with signs CW, they came more efficient than the same gates generated with soliton pulses.
Neste trabalho, portas lógicas ópticas são propostas a partir da utilização de um acoplador direcional não linear (NLDC) triplo planar simétrico de fibra óptica e com um dos guias operando como controle. Para tal fim, obtemos as características de transmissão do acoplador e, em seguida, fizemos uma análise do coeficiente de extinção e do fator de compressão. Inicialmente, investigamos o desempenho do acoplador proposto operando no regime CW e posteriormente utilizando pulsos ultracurtos, tipo sóliton com 2ps de largura. Com o modelo proposto para o dispositivo, conseguimos efetivar portas lógicas AND, NAND, OR, XOR e NOT para um conjunto de fases aplicadas ao pulso de controle. As portas lógicas geradas com o dispositivo operando com sinais CW, apresentaram-se mais eficientes que as mesmas portas geradas com sinais pulsados.
Sosa, Nicholas. "Looking for Meaning in All the Wrong Places: The Search for Meaning After Direct and Indirect Meaning Compensation." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1486982633785334.
Full textMurray, Megan Geneva. "The unladylike ladies of roller derby? : how spectators, players and derby wives do and redo gender and heteronormativity in all-female roller derby." Thesis, University of York, 2012. http://etheses.whiterose.ac.uk/2327/.
Full textEvans, Susan Elizabeth. "Looking for spirits in all the right places, an examination of Native and non-Native substance abuse recovery strategies in British Columbia." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ62553.pdf.
Full textCastro, Jacqueline Vieira de. "Avaliação da amplitude de movimento da articulação coxofemoral como fator de risco etiológico para as lesões por não-contato do ligamento cruzado anterior do joelho em praticantes de futebol." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2008. http://hdl.handle.net/10183/15466.
Full textPurpose: To investigate whether there is an association between decreased hip range of motion and noncontact anterior cruciate ligament (ACL) injuries in soccer players. Methods: In this case-control study, 50 soccer players with noncontact ACL injuries confirmed by surgery had their hips examined and compared with those of a control group. Findings were statistically analyzed according to cutoff points (70 and 80 degrees of total internal-external rotation sum) for both groups. Results: A significant decrease in hip range of motion was found in 38% of all individuals studied at the lower cutoff point (70 degrees) and 64% at the upper cutoff point (80 degrees). The decrease in hip range of motion was greater in the group with ruptured ACL than in controls, with little difference between the two cutoff points (70 and 80 degrees). The difference between patients and controls was statistically significant (p < 0,001). Conclusions: There was strong association between decreased hip range of motion and ACL ruptures in soccer players, not only but mainly due to internal rotation lessening. Despite lacking comparison with other sports, our findings showed a higher decrease of hip range of motion in the group of soccer players when compared with the general population.
Pachon-Rodriguez, Edgar-Alejandro. "Étude de l’influence de la dissolution sous contrainte sur les propriétés mécaniques des solides : fluage du plâtre." Thesis, Lyon 1, 2011. http://www.theses.fr/2011LYO10284/document.
Full textThe huge enhancement of the creep of plasterboard by humid environments is an old problem in the building industry, but its origin remains unknown. To understand this mechanism a three scales study (macro : mechanical behavior, micro : dissolution kinetics, nano : atomic observation) has been done. There is a strong correlation between wet plaster creep and gypsum dissolution kinetics. The concordance between this correlation and the law of deformation by pressure solution, well-known in geology, permits to propose pressure solution as one of the mechanisms responsible of wet plaster creep. The topological evolution of the cleaved surface of a gypsum single crystal during its dissolution in a flowing under-saturated aqueous solution has been observed with an atomic force microscope. The kinetics of step migration strongly depends on the saturation state of the solution, the force applied by the tip on the surface, as well as the used additives. The study of the influence of the force applied by the tip on the step velocity evidence two different dissolution enhancement regimes. At high forces (> 15 nN) a corrosive wear behavior is observed, while at low forces (< 10 nN) pressure solution is the observed mechanism. The step velocity evolution with the force obeys the known kinetic law of pressure solution
Tokgoz, Korkut Kaan. "Broadband Phase Shifter Realization With Surface Micromachined Lumped Components." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614652/index.pdf.
Full textto steer the main beam for electronic scanning. This thesis includes all of the stages starting from the theoretical design stage to the measurements of the phase shifters. In detail, all-pass network phase shifter configuration is used to achieve broadband and ultra wide-band differential phase characteristics. For these reasons, 1 to 2 GHz, 2 to 4 GHz, and 3 to 6 GHz 4-bit, 22.5°
phase resolution phase shifter realization with surface micromachined lumped components are designed, simulated, fabricated and measured. Basic building blocks of the phase shifters, i.e., surface micromachined lumped components, square planar spiral inductors and Metal-Insulator-Metal capacitors are designed with EM simulation and lumped equivalent model extractions. The validation of the designed square planar spiral inductors is done with fabrication and measurement steps, very low error, below 1%, between the designs and fabricated samples are observed. Using this knowledge on lumped elements finally phase shifters are designed with surface micromachined lumped components, fabricated using an in house technology provided by METU-MEMS facilities, RF MEMS group. Low phase rms error, good return and insertion loss considerations are aimed, and achieved. In addition to the main work of this thesis, a generalized theoretical calculation method for 2n-1 number of stages all-pass network phase shifters is presented for the first time in literature. A different, new, broadband, and combined phase shifter topology using two-stage all-pass filters is presented. Moreover, the implementation of this idea is proved to be practical to 3 to 6 GHz 5.625°
and 11.25°
combined phase shifter. A new approach for stage numbers other than power of 2 is indicated, which is different from what is already presented in the literature. An example practical implementation results are provided for the three-stage 4-bit 1 to 6 GHz phase shifter. Also, a small improvement in SRF of the high inductance valued inductors is achieved with the mitering of the corners of square planar spiral inductors. Comparison of the measured data between the normal inductors and mitered versions shows that the first SRF of the inductors are increased about 80 MHz, and second SRF of the inductors are increased about 200 MHz.
Haycraft, Jade Alexandra Ziems. "Multi-factorial modelling of player physical development within the Australian Football League (AFL) participation pathway." Thesis, 2018. https://vuir.vu.edu.au/38671/.
Full textHynes, Jack Stewart. "Chasing the Dream: The Negotiation of Identity through the Process of Becoming an AFL Player." Thesis, 2022. https://vuir.vu.edu.au/44466/.
Full textMcIntosh, Sam. "Modelling player performance data for organisational decision support in professional Australian Rules football." Thesis, 2020. https://vuir.vu.edu.au/40987/.
Full textRoss, Julian. "The Jekyll and Hyde Element: The Career of Geelong Football Club Champion and Media Celebrity John ‘Sam’ Newman." Thesis, 2017. https://vuir.vu.edu.au/39507/.
Full textSpencer, Bartholomew. "Spatiotemporal Analysis of Australian Rules Football." Thesis, 2019. https://vuir.vu.edu.au/39598/.
Full textChen, Chih-Hao, and 陳治豪. "Resource provisioning for MMOG clouds considering AFK players." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/35663082384757736464.
Full text國立交通大學
網路工程研究所
100
Massively Multiplayer Online Games (MMOGs) are attracting millions of players from all over the world and become an important part of personal entertainments. To support more online players, many game providers (such as OnLive) take advantage of cloud computing to develop cloud gaming services. Although cloud gaming providers obtain powerful computing power from clouds, how to allocate cloud resources (e.g., virtual machines, VM) so as to meet player requirements and to efficiently utilize cloud resources is a key issue. In this paper, we propose an efficient resource provisioning scheme for MMOGs considering AFK (away from keyboard) players, RP-AFK, in game clouds. We leverage the characteristic of AFK players, which only need low QoS for gaming, to decrease the provision of resources (e.g., frame rates) to them and to support active online players. We used World of Warcraft (WoW), which is currently the world's most-subscribed MMORPG (Massively Multiplayer Online Role Player Game), as a case study to measure the total numbers of players and AFK players. We predicted the total numbers of players and AFK players by using neural networks, which can provide high prediction accuracy, and evaluated the number of extra online players supported. Then we predicted the number of VMs required. Evaluation results based on real game data show that the proposed RP-AFK can support 11.04% extra online players. One less VM can be used in a game zone of a WoW realm for 46.05% of the observed time. Therefore, the proposed scheme can reduce the waste of cloud resources and increase the resource utilization to support more players.
Tsai, Chang-Yi, and 蔡昌毅. "All-planar Gain-enhanced and Minimized Patch Antenna." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/46406926341412538422.
Full text國立交通大學
電信工程系
89
Utilizing the recently developed Electric-Magnetic-Electric (EME) composite metal strips, which can increase the slow-wave factor and have a broad stopband, two applications are introduced in this thesis. First one uses slow-wave structures to minimize the patch antenna employing PCB (printed-circuit-board) fabrication process. The resonant length and area of the slow-wave patch antenna are reduced to be 76 % and 58 % when compared with the conventional one. Gain enhancement of the patch antenna by suppressing surface waves is the other application in our studies. According to the experimental results, the peak gain of the design patch antenna is 1.03 dBi higher than the conventional one. Statements and measurement results of both patch antennas are also included in this thesis.
Ruan, Yinlan. "Chalcogenide planar waveguide devices for all-optical processing." Phd thesis, 2005. http://hdl.handle.net/1885/151519.
Full textLin, Shao-Cheng, and 林韶正. "ALL-Planar Low Phase Noise Transistor-Controlled FSK Modulator." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/41253769121392366611.
Full text國立交通大學
電信工程系
89
This thesis presents a novel design method of oscillator utilizing the location and size “Colpittslike” characteristic of stability circle. A high power and low cost single biased PHEMT VCO structure, called gate-opened oscillator, has been designed for FSK application. This VCO utilizes a switch as a frequency controller capable of wider bandwidth than traditional varactor-controlled case. In addition, applying a planar waveguide resonator as a comparison of microstrip line, can successfully reduce the phase noise about 8 dB .The oscillator output power is 16.6dBm and the oscillation frequency is 15.1Ghz.Measured phase noise is -85dBc/Hz at 100KHz offset from the carrier, f=50MHz, input bit rate is 10M bit/s, Vds=3.5V, Ids=22mA.The simulation results of power and frequency agree well with the measured result, in addition, the power control is more than 15 dB and efficiency is at least 60%.
Hung, Tsai-Pi, and 洪才弼. "Indoor Wireless LAN All-planar Millimeter-Wave Antenna Arrays." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/57062236980041194140.
Full text國立交通大學
電信工程系
89
This paper presents three types of leaky wave antenna arrays at Ka-band, which can be realized as a fully planar fashion by employing conventional PCB (printed circuit board) process. A 192-elements leaky wave antenna array, employing the lin-ear array design approach, is built and tested at operating frequency 38GHz. The ex-perimental results indicate the antenna directivity of 22.3dB at the angle of 30.2°/0.8° (El/Az), and the radiation efficiency of 20.3%. To elevate the radiation efficiency of the described antenna array, a closely coupled leaky wave antenna array, employing the couple mode approach, is designed and implemented, showing the greater radia-tion efficiency of 70.3% at 30.2GHz. Additionally, an integrated antenna array proto-type emitting cone-shaped pattern is introduced into the indoor wireless LAN (local area network) application. The measured omni-directional radiation pattern with the 3-dB beamwidth of 22° at the elevated angle of 48° can be obtained, thus allowing nearly uniform coverage. Since all of these mentioned antenna arrays could make the interface to the planar integrated circuits a straightforward practice, a possible sce-nario for indoor wireless LAN constructed by the proposed antenna arrays can be achieved.
Lee, Cheng Jung, and 李振榮. "All-Planar Millimeter-Wave Transition, Filters and Sub-Harmonic Mixer." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/02144345845377570004.
Full text國立交通大學
電信工程系
89
This paper presents a novel millimeter-wave design methodology, which applies a multi-layered structure to integrate microstrip and rectangular waveguide on the printed circuit board(s) simultaneously. Two kinds of microstrip-to-waveguide transi-tions such as direct-contact type and DC-block type, which all consist of two back-to-back connected mode converters, are built and tested at Ka-band. The meas-urement results of the direct-contact type and DC-block type indicate that the return losses are better than —10 dB with over 30 % and 40 % bandwidth and the insertion losses are —0.8 dB and —0.56 dB, respectively. To exhibit the applicability of the pro-posed microstrip-to-waveguide transitions, we develop two essential components known as filter and mixer, which are widely used at the communication system. The Ka-band filter prototypes, consisting of two planar mode converters and five waveguide slits, are analyzed by the mode matching method, showing a fair filter frequency response. An even quadrature harmonic mixer employing simple diplexer approach for direct conversion receiver is also presented in this paper. The measure-ment results demonstrate that the conversion loss of 10.7 dB and isolation of more than 30 dB between RF and LO can be achieved. Consequently, these attractive per-formances significantly show a great potential of implementing the multi-function RF modules by using conventional PCB (printed circuit board) fabrication process.
Buchanan, Patricia A. "Developmental perspectives on basketball players' strength, knee position in landing, and ACL injury gender differences." 2003. http://www.oregonpdf.org.
Full textTeng, Ke, and 鄧格. "All-Solid-State Planar Micro-Supercapacitors Based on MoOx/Ag Multilayers." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/pumuk8.
Full text國立中央大學
材料科學與工程研究所
105
With the scientific and technological advancements, the society which we live is facing the energy and environmental related problems such as pollution, deficiency of fossil fuels, and global warming. In order to resolve these issues, green-energy and renewable materials as well as their devices are demanded. Supercapacitors (SCs) exhibit high specific capacitance and power density, fast charge-discharge rate, and long cycle life. In addition, they are safe in operation and environmental friendly. Recently, micro-supercapacitors (MSCs) have attracted much interests since they can be further integrated into MEMS and CMOS. In this work, we introduce planar interdigitated electrode structure based on MoOx thin film electrode materials, which can be further fabricated to on-chip and all-solid-state MSC. This study investigated the influence of the geometric configuration of planar interdigitated MSCs with different interdigitated patterns (varying the interspace, width, length and number of interdigitated fingers) on their electrochemical properties. Furthermore, we introduce a new concept to fabricate MSC based on MoOx/Ag multilayers, with which the volumetric capacitance is much higher than that of the bare MoOx-based MSC. MoOx/Ag multilayer MSC also demonstrates higher energy density and power density. Electrochemical impedance spectroscopy (EIS) confirmed that the electrical conductivity of MoOx was significantly improved due to the incorporation of silver. The corresponding volumetric capacitance increases as the the silver thickness increases. But with the excess silver, the capacitance retention rate was found to be degraded. MoOx/Ag multilayers MSC with a thickness of 1.5 nm for each Ag layer exhibits most excellent cycle stability and highest volumetric capacitance after a large cycling number of 10000 times. This work indicates that high electronic conductivity of the electrode material is crucial to achieving high specific capacity as well as power and energy density for pseudocapacitors. These excellent electrochemical performance of results suggest that our method and design show great promise for applications in integrated energy storage for all solid-state microsystems technologies.
Wong, I.-Hsieh, and 翁翊軒. "Fabrication and Characterization of Planar and Gate-all-around Germanium Channel MOSFETs." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/3qbfh6.
Full text國立臺灣大學
電子工程學研究所
105
In this dissertation, the fabrication and electrical characterization of germanium channel planar pMOSFETs and gate-all-around (GAA) nFETs in terms of parasitic resistance reduction, process integration, temperature dependence of mobility/ threshold voltage extraction, and strain response are investigated. As the device keeps scaling down, the high mobility channels are proposed to enhance drive current and reduce power consumption. With the integration of 3D device architectures (FinFET, tri-gates, and GAA FETs), the devices provide good gate controllability to suppress short channel effects, reduced leakage and power consumption and increased current density. Ge has been integrated with modern Si process and can be epitaxially grown on large scale Si wafer by chemical vapor deposition (CVD) to reduce the cost. The highest hole mobility and high electron mobility of Ge are benefit for the integration of CMOS circuit, which make Ge a promising candidate to replace Si as channel material. In the first part of this dissertation, the high mobility Ge planar pFETs are fabricated and characterized. The high quality Al2O3/GeO2 gate stack provides low density of interface trap (Dit), which leads to suppressed impurity scattering and mobility enhancement at low field region. To further boost the performance by reducing parasitic resistance, two-step implantation and NiGe S/D contact metal are integrated on Ge substrates. For pMOSFETs, the <110> channel direction on the (110) Ge substrates offers the highest hole mobility theoretically among all substrate/channel configurations. The demonstrated Ge pFETs have the reduced S/d parasitic resistance and peak hole mobility of 528 cm2/V-s. To further enhance the drive current, the uniaxial tensile strain is applied perpendicular to the channel direction by wafer bending. Due to the Poisson ratio, the compressive strain parallel to the channel can be generated. The (100) device has a larger strain response than the (110) device which is consistent with theoretical calculation. In the second part of this dissertation, the temperature dependence of mobility and threshold voltage of Ge planar pFETs are investigated by low temperature measurement. The carrier mobility of Ge pFETs is dominated by impurity scattering at low field and increased with increasing temperature. At high field region, the mobility decreases with increasing temperature, indicating that phonon scattering is dominating. For the temperature dependent threshold voltage modeling, the effect of interface charge increase is considered due to the high Dit in Ge MOSFETs, and is verified with experimental data. Next, the high performance Ge junctionless nGAAFETs with high drive and Ion/Ioff are fabricated and characterized. The CVD-grown epi-Ge on SOI with low defect density and tensile strain is achieved by in-situ phosphorus doping and laser annealing and the active doping concentration reaches 2E20 cm-3. The selective anisotropic etching was performed to remove the defective Ge near Ge/Si interface which degrade IV characteristics and to form GAA structure. For the operation mode, the junctionless (JL) transistor is used to prevent defect generation and doping diffusion issues of ion implantation and simplify the process. With channel length (Lch) of 250 nm and equivalent oxide thickness of 2.2 nm, the fabricated JL Ge nGAAFETs have high drive current of 828 uA/um and Ion/Ioff of 105. Finally, parasitic resistance reduction of Ge JL nGAAFETs by selective laser annealing and NiGe contact metal is investigated. In highly scaled transistor, the drive current is limited by parasitic resistance. To reduce the resistance by simply raise the S/D doping level, the selective laser annealing is performed to re-activate the dopant at S/D region and maintain good gate stack quality and relative low doping concentration at channel simultaneously. With scaled Lch of 60 nm, the drive current of Ge JL nGAAFETs reaches 1146 uA/um (VOV = VDS = 1 V) and can be further enhance to 1235 uA/um by applying external strain. The mobility enhancement of JL nGAAFETs with self-heating effect observed by pulse-IV and low temperature measurement indicates that the mobility is dominated by impurity scattering.
JEE, CANDICE XIAOBING, and 余曉冰. ""Chinese" Gardens and Places of Placelessness: All the Flowers Have Foreign Names." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/3ab8uk.
Full text國立臺灣藝術大學
中華藝術全英語碩士學位學程班
106
What can eliciting the motif of the Chinese garden in a contemporary exhibition explore, in terms of a diasporic expression about cultural identification? In my exhibition All the Flowers Have Foreign Names (花都外國名) at Haiton Art Centre (24 June – 1 July 2017), I regard the “Chinese” garden as a motif through which to rethink the definition of Chineseness and what this means to my cultural identity, from the perspective of someone from the Chinese diaspora. In this paper I recount my research around the frameworks of “Chinese” gardens and installation art, through phenomenological interpretations about the landscape and cultural formation processes, in order to understand the artistic language with which I materialise this exploration. This research includes challenging stereotypes of Chinese gardens that homogenise definitions of the Chinese race and values, including the Chinese relationship to “nature”. These ideas filter into my exhibition All the Flowers Have Foreign Names to express the diasporic experience of ‘placelessness’. Through artistic explorations around wandering, speechlessness, and a construction of cultural identity that ‘recycles in order to build itself’, I create a placeless installation that temporarily places ‘placelessness’.