Relevant bibliographies by topics / Aiji no Ie

Contents

  1. Journal articles
  2. Books
  3. Conference papers

Academic literature on the topic 'Aiji no Ie'

Author: Grafiati
Published: 27 July 2024
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aiji no Ie.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aiji no Ie"

1

Saja, Francesco. "Ie Partie : La justice constitutionnelle en 1987." Annuaire international de justice constitutionnelle 3, no. 1987 (1989): 630–44. http://dx.doi.org/10.3406/aijc.1989.1019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Saja, Francesco. "Ie Partie : La justice constitutionnelle en 1988." Annuaire international de justice constitutionnelle 4, no. 1988 (1990): 437–69. http://dx.doi.org/10.3406/aijc.1990.1066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Saja, Francesco. "Ie Partie : La justice constitutionnelle en 1989." Annuaire international de justice constitutionnelle 5, no. 1989 (1991): 545–71. http://dx.doi.org/10.3406/aijc.1991.1110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

SUZUKI, Chikako. "SUPPORT SYSTEM TO FORM ‘CHIIKI-KYOSEI-NO-IE’ BY SETAGAYA TRUST MACHIZUKURI FOUNDATION." Journal of Architecture and Planning (Transactions of AIJ) 75, no. 650 (2010): 873–82. http://dx.doi.org/10.3130/aija.75.873.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

HAYAMI, Kiyotaka. "INFLUENCE OF ANTONIN RAYMOND ON “NIKKO RYUZU YAMA NO IE (LODGE AT RYUZU IN NIKKO)” DESIGNED BY TSUYOSHI ICHIURA." Journal of Architecture and Planning (Transactions of AIJ) 74, no. 639 (2009): 1183–89. http://dx.doi.org/10.3130/aija.74.1183.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mandujano-Ruíz, Araceli, Jorge Morales-Hernández, Héctor Herrera-Hernández, Luis E. Corona-Almazán, and José M. Juárez García. "Evaluación del comportamiento electroquímico del extracto de nopal (Opuntia Ficus-Indica) como posible inhibidor de corrosión." Revista de Metalurgia 53, no. 4 (2017): 108. http://dx.doi.org/10.3989/revmetalm.108.

Full text
Abstract:
La corrosión es uno de los principales problemas del deterioro en componentes, herramentales, equipos e inclusive a nivel estructural, ejemplo de esto son los aceros al carbono. En el presente trabajo se estudió la capacidad de inhibición a la corrosión de un extracto orgánico biodegradable proveniente de la planta del Nopal (Opuntia ficus-indica) para la protección del acero al carbono tipo AISI 1018, al agregar el 50% v/v del extracto de Nopal (EN) en una solución de H2SO4 (0,6 mol.l-1). Se utilizaron las técnicas de Resistencia a la Polarización (LPR) y Espectroscopía de Impedancia Electroq
APA, Harvard, Vancouver, ISO, and other styles
7

Vu, Van Duy, Nhat Minh Nguyen, Trong Thang Tran, and Phuong Nam Luu. "Studying the Effect of Ignition Voltage (Ue) and Amperage (Ie) when Processing Hardened SKD 11 Materials on Wire Cut Electric Discharge Machining (WEDM)." International Journal of Innovative Science and Research Technology 7, no. 4 (2022): 332–37. https://doi.org/10.5281/zenodo.6503140.

Full text
Abstract:
Machining using spark is one of the widely used advanced machining methods. Surface quality and machining productivity are the two most important parameters[1]. The majority of optimization studies are in single-objective form[10][14]. However, there have also been some studies on the basis of multi-objective optimization problem[10][14]. SKD11 steel is a steel grade according to Japan's JIS standard (AISI standard named D2; DIN standard named 2379), widely used in cold fabrication with high wear resistance characteristics, good tempering permeability. SKD11 large material is used after ha
APA, Harvard, Vancouver, ISO, and other styles
8

Kannan, A. Rajesh, N. Siva Shanmugam, and G. Sreedhar. "Studies on corrosion behavior of AISI 316L cold metal transfer weldments in physiological solutions." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 234, no. 6 (2020): 644–56. http://dx.doi.org/10.1177/0954408920936799.

Full text
Abstract:
Evaluating the mechanical integrity and corrosion performance of welded joints is vital to replace the malfunctioning parts in human body. This research aims to study the effect of Cold Metal Transfer (CMT) process on the corrosion behavior of austenitic stainless steel (AISI 316L) weldments in physiological solution. ER316L filler wire is used to weld thin sheets of 2mm to butt joint configuration. Optical microscopy and Scanning electron microscopy (SEM) are used to study the microstructural evolution in base metal (BM), heat affected zone (HAZ) and weld metal (WM). For determining the phase
APA, Harvard, Vancouver, ISO, and other styles
9

Iswar, Muh, Abdul Salam, Aminuddin Aminuddin, and Fahruddin Fahruddin. "ANALISA SIFAT MEKANIK DAN STRUKTUR MIKRO HASIL PENGELASAN GESEK PIPA STAINLESS STEEL AISI 304L." Jurnal Teknik Mesin Sinergi 15, no. 1 (2019): 84–97. http://dx.doi.org/10.31963/sinergi.v15i1.1183.

Full text
Abstract:
Friction welding is a metal connection that occurs due to heat caused by pressure/friction force due to rotation of metal one to other metal axis. In addition, spindle shaft with this process can minimize the shift axis of the welded material. The purpose of this research is to know the effect of variation of rotation speed and wrought time on mechanical properties (tensile strength, flexural and hardness) and microstructure of AISI 304L Stainless Steel pipe of friction welding. The experiment was carried out by stages of friction welding process on Pindad type lathes by varying the rotation (
APA, Harvard, Vancouver, ISO, and other styles
10

Mykhaloiko, O. "Changes in platelet counts in patients with acute ischemic stroke depending on sensitivity to acetylsalicylic acid therapy." Bukovinian Medical Herald 24, no. 4 (96) (2020): 65–74. http://dx.doi.org/10.24061/2413-0737.xxiv.4.96.2020.105.

Full text
Abstract:
The study aims to investigate changes in the thrombocytogram in patients with early recovery from ischemic stroke depending on the sensitivity to acetylsalicylic acid therapy.Material and methods. A clinical and laboratory analysis of 80 patients with acute ischemic stroke (AII), who took acetylsalicylic acid (ASA) at a dose of 75-100 mg per night to prevent recurrent stroke. The control group consisted of 30 healthy individuals who did not take ASA. The functional activity of platelets was determined on a laser aggregometer Biola Aggregation Analyzer and on the results of a platelet cytogram
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Aiji no Ie"

1

Ie, Aiji no. Shiryō. Fuji Shuppan, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Aiji no Ie"

1

Griffiths, A. J., and A. Turnbull. "Impact of Long Term Exposure on Corrosion Fatigue Crack Growth of Low Alloy Steels." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96262.

Full text
Abstract:
Abstract The effect of long term pre-exposure on the corrosion fatigue crack growth rates of low alloy steels has been studied in order to provide guidance on the reliability of short term testing. Tests were conducted in aerated 3.5% NaCl at a potential of -1100 mV(SCE) using a sinusoidal loading wave with a stress ratio of 0.25 and a frequency of 0.167 Hz. Pre-exposure of AISI 4340 for 21 weeks enhanced the crack growth rates by up to a factor of 7 relative to data from conventional tests which lasted about 4 weeks. Pre-exposure of 3.5% Ni-Cr-Mo-V steel for 55 weeks increased the corrosion f
APA, Harvard, Vancouver, ISO, and other styles
2

da T. Silva, Mayara A., Jean V. Ferrari, and Idalina V. Aoki. "Corrosion Behavior of Halloysite Nanotubes Loaded with Quaternary Imidazoline Based Inhibitor." In LatinCORR 2023. AMPP, 2023. https://doi.org/10.5006/lac23-20403.

Full text
Abstract:
In oil exploitation, carbon dioxide, hydrogen sulfide, and dissolved salts (mainly sodium chloride) can cause severe substantial corrosion to the pipelines. Additives such as corrosion inhibitors are one of the most viable solutions for dealing with corrosion problems arising from different process conditions in oil and gas production [1]. Typically, film former inhibitors are used on a large scale, and aliphatic diamines or imidazolines with long carbon chains are examples of effectiveness [2]. This study aims to evaluate the corrosion performance of quaternary imidazoline loaded on halloysit
APA, Harvard, Vancouver, ISO, and other styles
3

Ancelmo Macedo, Antonio Lucas, Robson F. S. Navegantes, Mariana M. Marques, Antônio Victor de Castro Braga, Dalva C. B. do Lago, and Lilian F. de Senna. "Coffee Leaves Dried Extracts as Green Inhibitors for Carbon Steel in Acid Medium." In LatinCORR 2023. AMPP, 2023. https://doi.org/10.5006/lac23-20464.

Full text
Abstract:
Corrosion inhibitors are widely used to mitigate the corrosion process of carbon steel in acidic media. However, there is a growing concern about the toxicity, biodegradability, and bioaccumulation of corrosion inhibitors released into the environment. The need for environmental preservation requires the immediate replacement of toxic inhibitors with less aggressive ones. Extracts from plants and other natural wastes became interesting candidates for potential green corrosion inhibitors. The use of natural products as corrosion inhibitors for carbon steel, mainly in acidic environments, has be
APA, Harvard, Vancouver, ISO, and other styles
4

Che´rif, Mehdi, Benoiˆt Furet, Herve´ Thomas, and Jean-Yves Hascoe¨t. "Simulation of the Milling Process for CAM Applications." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42131.

Full text
Abstract:
CAD/CAM systems require technical data to model the tool and machined workpiece behavior during the cutting process. The large varieties of machining input data prevent exhaustive studies for each machining operation. The purpose of this paper is to analyze the most influent parameters (ie. rake angle, cutting speed and hone radius) on cutting force during the milling process in order to limit experiment testing while providing accurate data for the CAD/CAM requirement. Simulation results based on modified Altan’s approach are compared with experimental measurement for three different material
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Aiji no Ie' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography