Relevant bibliographies by topics / AISI 1018 Mild Steel

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'AISI 1018 Mild Steel'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'AISI 1018 Mild Steel.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "AISI 1018 Mild Steel"

1

Puspendu, Chandra Chandra*. "MICROSTRUCTURAL STUDY OF MAG WELDED JOINT OF AISI 1018 MILD STEEL." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 10 (2017): 53–57. https://doi.org/10.5281/zenodo.1002630.

Full text
Abstract:
The present investigation aims to study the effect of process parameters of MAG welding (i.e. welding current, arc voltage and welding filler wire) on AISI 1018 mild steel plates considering the microstructure of base metal, heat affected zone and welded zone. CO<sub>2</sub> is used as shielding gas. An optical microscope used for the present investigation. The microstructure of base metal of mild steel represents an equiaxed grains of ferrite (F) as the major phase and smaller grains of fine pearlite (P) as the minor constituent at 50X magnification. Base metal has lower hardness because of f
APA, Harvard, Vancouver, ISO, and other styles
2

Saha, Arpita, and Dr Sudip Mukherjee. "Optimization of cutting force of turning of AISI 1018 mild carbon steel using RSM." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (2018): 2188–97. http://dx.doi.org/10.31142/ijtsrd11701.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mandal, Indranil, Thia Paul, Shibam Sen, Sourav Biswas, Subhaditya Chakraborty, and Sabyasachi Dey. "Sustainable Analysis of Process Parameters During MIG Welding of 1018 Mild Steel." International Journal of Social Ecology and Sustainable Development 13, no. 1 (2022): 1–14. http://dx.doi.org/10.4018/ijsesd.293255.

Full text
Abstract:
The present work analyses MIG in terms of strength and consumption of energy during joining of similar AISI 1018 Mild Steel plates. Sustainable manufacturing is the creation of various manufactured products that generally use different processes that will minimize negative impact on environment, conserve natural resources and energy, are also safe for the employees, consumers and communities as well as economically sound. Sustainable manufacturing highlights on the necessity of an energy effective process that optimize consumption of energy. AISI 1018 mild steel is extensively used in automoti
APA, Harvard, Vancouver, ISO, and other styles
4

Satyarathi, Jitendra, Vijay Kumar, Saurabh Kango, Nitin Sharma, and Rajeev Verma. "Fabrication of Superhydrophobic Surface on Low Carbon Steel." IOP Conference Series: Materials Science and Engineering 1248, no. 1 (2022): 012015. http://dx.doi.org/10.1088/1757-899x/1248/1/012015.

Full text
Abstract:
Abstract The purpose of the present work is to fabricate superhydrophobic surfaces on commonly used low carbon steel (AISI 1018). Laser surface texturing (LST) method is used for creating circular textures on mild steel surface having the diameter and pitch of 200 μm each. Two different materials (wax &amp; Candle soot) are used to decrease the surface energy of the mild steel. It is observed from the results that the water contact angle of untreated surface increases from 87° to 155° after LST and lowering the surface energy by using wax, followed by candle soot.
APA, Harvard, Vancouver, ISO, and other styles
5

Arpita, Saha, and Sudip Mukherjee Dr. "Optimization of cutting force of turning of AISI 1018 mild carbon steel using RSM." International Journal of Trend in Scientific Research and Development 2, no. 3 (2018): 2188–97. https://doi.org/10.31142/ijtsrd11701.

Full text
Abstract:
With passage of time technologically advanced machines have been developed. But the problem of the tool wear and cutting force for a particular machining process remains to be improved. So, to avoid or to cope up with this problem it is necessary to find the best combination of machining parameters for obtaining optimum cutting force. In this work the optimization of cutting force for a given combination is done in a useful and easy way. Three factors are selected that affect the optimizing parameters in case of turning. These factors are optimized to get the optimum cutting force. This is ach
APA, Harvard, Vancouver, ISO, and other styles
6

Bushroa, A. R., and C. C. Ying. "Plasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi Method." Advanced Materials Research 47-50 (June 2008): 1003–6. http://dx.doi.org/10.4028/www.scientific.net/amr.47-50.1003.

Full text
Abstract:
This research described the optimization of the process parameters for clad coating of alumina (Al2O3) powder on AISI 1018 mild steel utilizing plasma non-transferred arc cladding process using Taguchi method and Pareto ANOVA analysis. Four factors were selected which were plasma arc current, plasma torch velocity, distance between nozzle and layer and ratio of alumina powder to binder. The analysis of the results showed that the optimal combination for high microhardness were distance between nozzle and layer at 3 mm and plasma torch velocity at 0.03 mm.
APA, Harvard, Vancouver, ISO, and other styles
7

Mandal, Indranil, Thia Paul, Sabyasachi Dey, et al. "Sustainable Analysis of Process Parameters During TIG Welding of Dissimilar Joining Between 304 Stainless Steel and AISI 1018 Mild Steel." International Journal of Social Ecology and Sustainable Development 13, no. 1 (2022): 1–14. http://dx.doi.org/10.4018/ijsesd.295970.

Full text
Abstract:
The present work investigates TIG in terms of strength and energy consumption during joining of dissimilar metal plates between 304 Stainless Steel and AISI 1018 Mild Steel. TIG welding basically promotes a sustainable environment because it consumes less energy. Energy conservation means to reduce imbalance between demand and energy supply that is necessary to protect ecological resources and natural environment. TIG welding is a precision welding process which makes possible for joining of thinner and lighter materials. Joining of various dissimilar metals becomes great interest owing to the
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar, Sudhir, and Rajender Singh. "Investigation of tensile properties of shielded metal arc weldments of AISI 1018 mild steel with preheating process." Materials Today: Proceedings 26 (2020): 209–22. http://dx.doi.org/10.1016/j.matpr.2019.10.167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

GonzálezJP, León, Onofre BustamanteE, Rodríguez Gómez FJ, and Espinoza Vázquez A. "Electrochemical Behaviourof Some Amino Acids as Corrosion Inhibitors for Mild Steel in Sweet Brine." SOJ Materials Science & Engineering 8, no. 1 (2021): 1–14. http://dx.doi.org/10.15226/sojmse.2021.00165.

Full text
Abstract:
The effect of concentration and immersion time of phenylalanine (Phe), leucine (Leu) and valine (Val) for AISI 1018 in sweet brine was studied trough Electrochemical Impedance Spectroscopy (EIS), polarization resistance (Rp), Scanning Electronic Microscope (SEM) and Fourier Transform Infrared Spectroscopy (FTIR) as an ecological and biodegradable alternative as corrosion inhibitors. Electrochemical results showed that amino acids are good corrosion inhibitors according to their charge transfer resistance improvement. The effect of immersion time on corrosion behavior was studied trough 24 h wi
APA, Harvard, Vancouver, ISO, and other styles
10

Aniekan, Essienubong Ikpe Michael Okon Bassey. "Modelling and Simulation of Transient Thermal Stress Distribution across AISI 1018 Flat Plates at Variable Welding Temperature Regime." Journal of Materials Engineering, Structures and Computation 2, no. 3 (2023): 1–22. https://doi.org/10.5281/zenodo.8297860.

Full text
Abstract:
<em>In recent times, failure in structural components has been attributed to a lack of improper understanding of material behaviour under welding temperature, during which thermally induced stresses are trapped (residual stress) within the weldment. This study investigated the effects of variable Tungsten Inert Gas (TIG) welding temperature across AISI 1018 flat plates concerning thermal stress distribution using experimental and Finite Element Method at welding temperatures ranging from 6800-9600<sup>o</sup>F. Thermally-induced stresses of 4244.373 and 4345.894 MPa were obtained from both FEM
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "AISI 1018 Mild Steel"

1

Shaikh, Vasim. "Mist and Microstructure Characterization in End Milling Aisi 1018 Steel Using Microlubrication." Thesis, University of North Texas, 2013. https://digital.library.unt.edu/ark:/67531/metadc283858/.

Full text
Abstract:
Flood cooling is primarily used to cool and lubricate the cutting tool and workpiece interface during a machining process. But the adverse health effects caused by the use of flood coolants are drawing manufacturers' attention to develop methods for controlling occupational exposure to cutting fluids. Microlubrication serves as an alternative to flood cooling by reducing the volume of cutting fluid used in the machining process. Microlubrication minimizes the exposure of metal working fluids to the machining operators leading to an economical, safer and healthy workplace environment. In this d
APA, Harvard, Vancouver, ISO, and other styles
2

Maru, Tejas. "Effects of Minimum Quantity Lubrication (Mql) on Tool Life in Drilling Aisi 1018 Steel." Thesis, University of North Texas, 2012. https://digital.library.unt.edu/ark:/67531/metadc149638/.

Full text
Abstract:
It has been reported that minimum quantity lubrication (MQL) provides better tool life compared to flood cooling under some drilling conditions. In this study, I evaluate the performance of uncoated HSS twist drill when machining AISI 1018 steel using a newly developed lubricant designed for MQL (EQO-Kut 718 by QualiChem Inc.). A randomized factorial design was used in the experiment. The results show that a tool life of 1110 holes with a corresponding flank wear of 0.058 mm was realized.
APA, Harvard, Vancouver, ISO, and other styles
3

Al-Shenawa, Amaal Abdallah Ali. "Effectiveness of Fillers for Corrosion Protection of AISI-SAE 1018 Steel in Sea Salt Solution." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc984141/.

Full text
Abstract:
Corrosion represents the single most frequent cause for product replacement or loss of product functionality with a 5% coat to the industrial revenue generation of any country in this dissertation the efficacy of using filled coatings as a protection coating are investigated. Fillers disrupt the polymer-substrate coating interfacial area and lead to poor adhesion. Conflicting benefits of increasing surface hardness and corrosion with long term durability through loss of adhesion to the substrate are investigated. The effects of filler type, filler concentration and exposure to harsh environ
APA, Harvard, Vancouver, ISO, and other styles
4

Wodarcyk, John J. "Stress corrosion cracking susceptibility of AISI no. 1018 steel in low SO₂-CO₂-O₂ aqueous environments." Ohio : Ohio University, 1991. http://www.ohiolink.edu/etd/view.cgi?ohiou1183988473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wodarcyk, John J. Jr. "Stress corrosion cracking susceptibility of AISI No. 1018 steel in low SO 2CO 2O 2aqueous environments." Ohio University / OhioLINK, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1183988473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wu, Hou-Chen. "A study of the susceptibility to stress corrosion cracking of AISI 1018 carbon steel under low NO 2-air aqueous environment." Ohio : Ohio University, 1992. http://www.ohiolink.edu/etd/view.cgi?ohiou1173277576.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Verdolin, Regina Faber. "Corrosion fatigue of 1018 mild steel in urea-ammonium nitrate solution." 1995. http://hdl.handle.net/1993/19035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Horng, Jinn-Yuan, and 洪進源. "Expert System for Heat Treatment of AISI 1045 Mild Steel." Thesis, 1995. http://ndltd.ncl.edu.tw/handle/98249629826916748136.

Full text
Abstract:
碩士<br>國立成功大學<br>機械工程研究所<br>83<br>The frame of Expert System of AISI 1045 Mild Steel Heat Treatment was constituded by four topics : (1) The consultant about heat treatment offers users a vast amount of knowledge and data of heat treatment.It contains alloy element and physical property,mechanical property , microstructure after heat treatment , charateristics and kinds of quenchant ...etc.(2) The prediction of heat treatment result simulates the result of heat treatment when the heat treat
APA, Harvard, Vancouver, ISO, and other styles
9

Ahirwar, Pankaj. "Experimental Investigation on Autogenous Tungsten Inert Gas (TIG) Welding of AISI 1020 Mild Steel." Thesis, 2015. http://ethesis.nitrkl.ac.in/7614/1/2015_Experimental_Pankaj.pdf.

Full text
Abstract:
Tungsten Inert Gas welding is also known as Gas Tungsten Arc Welding (GTAW), is an advance arc welding process become a popular choice when a high level of weld quality or considerable precision welding is required. However, the major problems of TIG welding process are its slow welding speed and limited to lower thickness material in single pass. In this work, autogenous TIG welding has been performed on 5 mm thick AISI 1020 mild steel plate without using any filler material. Wide range of welding current and scan speed has been tested for obtaining a full penetration welding. Activated flux
APA, Harvard, Vancouver, ISO, and other styles
10

Richhariya, Vipin. "Surface Modification of AISI 1020 Mild Steel by Electrical Discharge Coating with Tungsten and Copper Mixed Powder Green Compact Electrodes." Thesis, 2013. http://ethesis.nitrkl.ac.in/5118/1/211ME2177.pdf.

Full text
Abstract:
Electro discharge machining (EDM) is a non- conventional machining process, which is widely used for machining of very hard materials used for engineering purposes. In Electrical Discharge Coating (EDC) process tool electrode which is manufactured by powder metallurgy (P/M) technique, connected to anode and work-piece (on which coating is to be done) is selected as cathode in electro discharge machine (polarity opposite to the electrical discharge machining). In presence of dielectric, tool electrode is worn out during EDM and the material removed from the surface of electrode deposited over t
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "AISI 1018 Mild Steel"

1

Liu, Yue. Application of photothermal radiometry to hardness testing and case hardening monitoring in AISI 1018 steel. National Library of Canada, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "AISI 1018 Mild Steel"

1

Ferrer L., V. H., C. A. Hernández C., and R. O. Vargas Aguilar. "An Analytical Solution for Friction Stir Welding of an AISI 1018 Steel." In Selected Topics of Computational and Experimental Fluid Mechanics. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11487-3_37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kumar, Ajay, and Shiv Kumar. "Experimental Analysis on AISI 1020 Mild steel Autogenous Tungsten Inert Gas (TIG) Welding." In Emerging Trends in IoT and Computing Technologies. CRC Press, 2024. http://dx.doi.org/10.1201/9781003535423-68.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ramli, Mohd Rahimi, Norasiah Abd Razak, Izwan Ismail, Ahmad Shahir Jamaludin, and Ahmad Rosli Abdul Manaf. "Effect of Dimple Size onto Wear Rate of Mild Steel AISI 1060 Surface." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3179-6_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Venkata Suresh, Bade, Y. Shireesha, and P. Srinivasa Rao. "Influence of Mechanical Vibrations on Impact Strength of 1018 Mild Steel Butt-Weld-Joints." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4606-6_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kannan, M., Naveen Rana, Mukesh Kumar, and Satyendra Singh. "Electrodeposition studies of zinc-nickel-alumina nanocoating on mild steel—AISI 1144 using hull cell." In Challenges and Opportunities in Industrial and Mechanical Engineering: A Progressive Research Outlook. CRC Press, 2024. http://dx.doi.org/10.1201/9781032713229-47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Suresh, Bade Venkata, Y. Shireesha, and P. Srinivasa Rao. "Effect of Electrode Vibration Welding on Impact and Tensile Strength of 1018 Mild Steel Weld Joints." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7787-8_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kannan, M., Satyendra Singh, and R. R. Prasad. "Effect of Plating Time and Current Density on Zn–Ni–Al Nanocoating Deposition on Mild Steel AISI 1144." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2188-9_38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shamsujjoha, Md, Bharat K. Jasthi, Michael West, and Christian Widener. "Microstructure and Mechanical Properties of FSW Lap Joint between Pure Copper and 1018 Mild Steel Using Refractory Metal Pin Tools." In Friction Stir Welding and Processing VII. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48108-1_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shamsujjoha, Md, Bharat K. Jasthi, Michael West, and Christian Widener. "Microstructure and Mechanical Properties of FSW Lap Joint between Pure Copper and 1018 Mild Steel Using Refractory Metal Pin Tools." In Friction Stir Welding and Processing VII. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118658345.ch16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wambua, Job M., Celestine K. Kinyua, Royston K. Mwikathi, et al. "Effect of Machining Parameters on Surface Roughness and Material Removal Rate in Dry Turning of AISI 1080 Mild Steel Using HSS Tools." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4147-4_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "AISI 1018 Mild Steel"

1

Ramirez, Andrea Marciales, Tesfaalem Haile, Behzad Ahvazi, and Tamer Crosby. "Parametric Studies on the Performance of Lignin as a Corrosion Inhibitor on AISI 1018 Carbon Steel Immersed in Model Brackish Water." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-12885.

Full text
Abstract:
Abstract This work evaluates the suitability of lignin as corrosion inhibitor when AISI 1018 carbon steel coupons were used as tests specimens. A stock solution of lignin powder, provided by an Albertan Pulp and Paper mill company, was tested for its inhibition efficiency in Rotating Cylinder Electrode (RCE) system according to ASTM G185-06. The testing environment consisted of modelled brackish water at different temperatures and pH values (30°C, 50°C and 85°C; pH=6 and 8). The corrosion rates of the test specimens calculated by both linear polarization resistance (LPR) and weight loss method
APA, Harvard, Vancouver, ISO, and other styles
2

Queiroz, Carlos H. B., Chiara Z. Mazzari, Luis G. R. Sá, et al. "Synthesis and Investigation of Sulfur/Nitrogen Doped Carbon Dots as Corrosion Inhibitors for Mild Steel in CO2 Saturated Saline Medium." In LatinCORR 2023. AMPP, 2023. https://doi.org/10.5006/lac23-20445.

Full text
Abstract:
The oil and gas industry can be considered one of the main industrial fields in corrosion inhibitor usage. In this aggressive environment, dissolved CO2poses as an intensifying component. The study and synthesis of new materials that can mitigate corrosion rates in such an aggressive environment is a constant scientific effort. Nanomaterials research can be considered a fast-growing field with many applications [1]. Specifically for corrosion inhibitor studies, materials that present a 2D or 0D structure, such as graphene oxide and carbon dots, respectively, may offer excellent inhibition capa
APA, Harvard, Vancouver, ISO, and other styles
3

Sastri, V. S., R. H. Packwood, and J. R. Brown. "Role of Modern Surface Analytical Techniques in Corrosion Inhibition Mechanisms." In CORROSION 1988. NACE International, 1988. https://doi.org/10.5006/c1988-88155.

Full text
Abstract:
Abstract Corrosion inhibition is a complex phenomenon and depends on the formation of protective layers on the metal surface. Of the many factors that affect the protective nature of the surface layers, the incorporation of the inhibitor in the surface layer is the most important. The manner in which the inhibitor is incorporated in the surface layer leads to three types of inhibition namely - interface inhibition, interphase inhibition and precipitation coating. Determining the composition of the surface layers of metals is facilitated by modern surface analytical techniques, such as X-ray ph
APA, Harvard, Vancouver, ISO, and other styles
4

Luo, J. S., X. Campaignolle, D. C. White, and I. Vance. "Corrosion of Mild Steel by Thermophilic Anaerobes." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93301.

Full text
Abstract:
Abstract The effect of thermophilic anaerobes upon corrosion of AISI C1020 carbon steel in synthetic oilfield produced water has been investigated. Electrochemical techniques such as: corrosion and pitting potential measurements, linear polarization resistance, and electrochemical impedance spectroscopy were applied to evaluate microbiologically influenced corrosion. Passivity retardation and breakdown of mild steel are accomplished easily in the produced water containing thermophilic anaerobes.
APA, Harvard, Vancouver, ISO, and other styles
5

Luo, J. S., P. Angell, D. C. White, and I. Vance. "MIC of Mild Steel in Oilfield Produced Water." In CORROSION 1994. NACE International, 1994. https://doi.org/10.5006/c1994-94265.

Full text
Abstract:
Abstract The effect of thermophilic anaerobes upon corrosion of AISI 1020 carbon steel in both natural and synthetic oilfield produced water was investigated. Electrochemical techniques such as: open circuit potential, linear polarization resistance, and electrochemical impedance spectroscopy associated with viable bacterial cell counts were applied to evaluate microbiologically influenced corrosion. The effect of glutaraldehyde upon MIC was also studied. Presence of thermophilic anaerobes in the produced water enhanced the corrosion of mild steel, and addition of glutaraldehyde in the water i
APA, Harvard, Vancouver, ISO, and other styles
6

Pagano, Mark A., and Shashi B. Lalvani. "Corrosion of Mild Steel in Seawater Subjected to Alternating Voltages." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92395.

Full text
Abstract:
Abstract Relatively little information is available on corrosion of materials in marine environment under the influence of AC fields. In this study, corrosion caused by sinusoidal alternating voltage (AV) fields in 1018 carbon steel is investigated by: (i) immersion tests, (ii) DC polarization experiments, and (iii) characterization of corrosion products. The experimental data show that under the influence of alternating voltage (60 Hz) applied between carbon steel and a platinum mesh counter electrode, the corrosion rate of the carbon steel increases with the applied voltage then decreases as
APA, Harvard, Vancouver, ISO, and other styles
7

Martin, R. L. "Corrosion of Alloy Steels in Oil Field Fluids." In CORROSION 1987. NACE International, 1987. https://doi.org/10.5006/c1987-87302.

Full text
Abstract:
Abstract Laboratory and field tests have been conducted on two low alloy and two higher alloy steels at a range of brine salinities and sulfide contents typical of oil well production fluids. AISI types 4130 and 4340 show the same behavior in these fluids as mild steel. AISI type 410 stainless steel and 9% chromium - 1% molybdenum steel corrode at rates as great as that of mild steel at higher chloride or sulfide concentrations. Special corrosion inhibitors are required for higher alloy steels when they are exposed to these conditions.
APA, Harvard, Vancouver, ISO, and other styles
8

Harper, M. A., and R. A. Rapp. "Further Development of Chromized-Siliconized Steels." In CORROSION 1992. NACE International, 1992. https://doi.org/10.5006/c1992-92126.

Full text
Abstract:
Abstract For the codeposition of Cr and Si into plain carbon and low alloy steels using the pack cementation process, the importance of using a silica filler to increase the fluorine activity in a pack is treated thermodynamically and experimentally. Also, results of cyclic oxidation tests indicate a thin protective silica film is formed during the oxidation of coated AISI 1018 steel coupons, however the silica film has not been positively identified.
APA, Harvard, Vancouver, ISO, and other styles
9

Fu, Shi-Liang, John G. Garcia, and Antoine M. Griffin. "Corrosion Resistance of Some Downhole Tubing Materials and Inhibitor Effectiveness in Sweet Environments." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96021.

Full text
Abstract:
Abstract Corrosion resistance of some downhole tubing materials were studied in a recirculating flow loop simulating conditions that induce flow enhanced corrosion. The selected materials included carbon steels (AISI 1018, API X-52), coiled tubing, 0.5% Cr, and 13% Cr (AISI 420) martensitic steel The X-52 steel showed the worst resistance to both general and localized corrosion while 13 Cr demonstrated the best performance. The corrosion resistance of the other three materials varied with the conditions. Hydrocarbons were found to have an effect on varying the corrosion rates. All of these mat
APA, Harvard, Vancouver, ISO, and other styles
10

Videla, Héctor A., Adriana E. Sautú, Sandra G. Gómez de Saravia, et al. "Impact of Glutaraldehyde on Biofouling and MIC of Different Steels&lt;subtitle&gt;A Laboratory Assessment." In CORROSION 1991. NACE International, 1991. https://doi.org/10.5006/c1991-91105.

Full text
Abstract:
Abstract Preliminary work devoted to elucidate the action of glutaraldehyde (GA) on Pseudomonas fluorescens and Desulfovibrio desulfuricans biofilms formed on AISI 304L SS and SAE 1020 mild steel is presented. Results show that efficacy of GA on planktonic cells is markedly higher than that on sessile cells. GA efficacy on biofilms formed on AISI 304L SS coupons (which are copious and cover large areas) is lower than that observed for SAE 1020 mild steel (which present a patchy distribution and scarce mucilaginous masses). It is concluded that biocidal activity of GA depends markedly on the na
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "AISI 1018 Mild Steel"

1

Sánchez-Islas, Alejandro, José Martínez-Trinidad, Iván Campos-Silva, Ulises Fifueroa-Lopez, and Ricardo Andrés García-León. Dry Sliding Wear Test on Borided AISI 1018 Steel Under Pin-on-Disc Configuration. Peeref, 2022. http://dx.doi.org/10.54985/peeref.2209p5499401.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'AISI 1018 Mild Steel' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography