To see the other types of publications on this topic, follow the link: Aktivní filtry.
Dissertations / Theses on the topic 'Aktivní filtry'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Aktivní filtry.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Fröhlich, Lubomír. "Aktivní kmitočtové filtry pro vyšší frekvence." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-233616.
Full textAbstract:
This thesis deals with the synthesis and optimization of frequency analogue filters with modern active elements usable for higher frequencies. The thesis is divided into three parts, the first part deals with the problematic concerning Leap-Frog combined ARC structure. Due to a difficult design, this method is not described in a detail and used in practice, although it shows e.g. low sensitivity. Firstly, a complete analysis of individual filters was made (for and T endings) and consequently these findings were used during implementation of this method to NAF program. Finally, samples of real filters were realized (for verification of functioning and correct design). Another very interesting topic concerning filters is usage of coupled band-pass for small bandwidth, where it is necessary to solve the problems concerning ratio of building elements values, but also price, quality, size of coils, sensitivity, Q factors, coefficients etc. That is why in practice a coil is very often substituted with other equivalent lossy and lossless blocks which create ARC filters structure. The design and the possibility of usage of lossy grounded elements were described here (such as synthetic inductors, frequency dependent negative resistor). Some parts of the design are individual computer sensitivity analysis, setting of usage and quality comparison of individual lossy grounded blocks. Besides, a program for these elements was created, it is useful for a quick design and depiction of transfer characteristics. The third part deals with the usage of tuning universal filters consisting three or more operational amplifiers, which secures its universality and possibility to create different kinds of transfer characteristic. In practice, Akerberg - Mossberg and Kerwin - Huelsman - Newcomb are the most used types of filters. These were also compared with less common universal filters. In the end, the possibility of digital tuning of universal filter with the help of digital potentiometers for filters of 10th order and frequency around 1 MHz was shown.
2
Třeček, Stanislav. "Aktivní elektrické filtry na bázi obvodů se spínanými kapacitory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217796.
Full textAbstract:
This thesis deals with concept of universal frequency filter by application of a switched-capacitor functional block. The concept is based on the theory of switched-capacitor circuits and the theory of a design of classical frequency filters. The printed circuit board was designed based on the filter connection developed by using a software Eagle. The filter was implemented as a laboratory product. This product has been revitalized and the frequency response of all types of filters has been measured. The measured parameters were compared with the parameters set out in the technical documentation of functional block.
3
Axman, Vladimír. "Obvody s moderními aktivními prvky." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-233441.
Full textAbstract:
PhD. thesis is deals about sekond order ARC filters for cascade synthezis of Active filters. Here are presented new configurations of second order filters with current conveyors usable for higher frequencies and new second order filters with current conveyors usable for electrical tunable filters. In PhD. Thesis are presented schematics and equations for new sekond order filters. There are presented also practical realizations of these filters and basic measure results.
4
Homola, Radek. "Kmitočtové filtry s proudovými aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218121.
Full textAbstract:
This master´s thesis is about MO-CF, DCCA and CC frequency filters with current active elements proposal. Current active elements, their features, structure and utilization are shown in introduction. A progress propose of universal filter is described in thesis. With the use of active elements has been established an universal filter with basic parameter changes capability (quality and limit frequency). SNAP software was used in this propose and the characteristics simulation have been done in OrCad-PSpice. For control changes of quality and limit frequency was used active element DCCA. The main circuit board of universal controlled filter was made with the EAGLE software. Created sample was measured for each type of filter, the different quality and limit frequency. These values were compared with simulated values of the filter.
5
Šotner, Roman. "Vícefunkční přeladitelný aktivní filtr." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217657.
Full textAbstract:
The diploma thesis deals about design of the ARC multifunctional filters using modern functional blocks. These active blocks are for example voltage feedback operational amplifiers (OAs), operational transconductance amplifiers (OTAs), current conveyors (CCIIs) or current mode analog multipliers, current feedback amplifiers (CFAs), integrated circuits with switched capacitors building blocks (SCs) and digital potentiometers. The filters are studied with ideal circuit models and models of third level (3) based on voltage controlled voltage sources, voltage controlled current sources etc. (analog behavioral modelling). The professional macromodels are used for example LT 1364 (Linear Technology), EL 2045 (Intersil), LT 1228 (Linear Technology), LM 13700 (National Semiconductor), EL 2082 (Intersil), AD 844 (Analog Devices) and others. The circuits of the designed filters are simulated in PSpice (OrCAD), parasite effects and effects of the real parts are studied. Tuning and electronic adjusting parameters these filters are discussed and controlled by simulation in PSpice. Properties some simulated circuits are compare with experimental results. In conclusion individual filters are discussed and compared their properties. The constructional details of the some filters are presented at the end of this work.
6
Holínský, Jan. "Modulární aktivní kmitočtové výhybky - laboratorní přípravek." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-433193.
Full textAbstract:
This thesis is about design of active frequency crossovers and their implementation. The work analyses particular types of circuits used in active frequency crossovers, especially circuits used for laboratory device. Then the work describes design of printed circuit boards (PCB) for the designed circuits and construction of modules for the laboratory device, when the compatibility and modularity is important for all active frequency crossovers arts. These modules are made and testing its functions. In this thesis is disassembled final proposal laboratory device and laboratory device is realized. The design and measurement of the characteristics of active frequency crossovers and correction circuits is processed in the form of a laboratory tasks.
7
Ševčík, Břetislav. "Elektronicky řiditelný aktivní filtr 2. řádu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217790.
Full textAbstract:
The diploma thesis deals with the modern design of the control circuits for digital potentiometers and their application in analog systems. The concept of the digital control is demonstrated on the electronically controlled active 2-nd order filter and programmable oscillator. The proposed design of the active filter describes a programmable active 2-nd order filter Sallen-Key. In this circuit it is possible independently programme cut-off frequency, Q factor and type of approximation with very good accuracy. The circuits of the designed filter and designed oscillator are simulated in PSpice (OrCAD), parasite effects and effects of the real parts are studied. Properties simulated circuits are compare with experimental results. These results appreciate quality and efficiency of the digitally controlled potentiometers in dependence on variable input circuit parameters. Integral part of this project is author’s universal control program called Digipot and comunications interface for many types of digital potentiometers with I2C, SPI or Up/Down interface. It is possible to use this device for many applications. The constructional details of the filter are presented at the end of this work. The software equipment is availability on enclosed CD.
8
Kosztyu, Tomáš. "Moderní aktivní prvky a jejich chování v lineárních blocích." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218124.
Full textAbstract:
The topic of this master’s thesis was a frequency filters and their realization using modern active elements like UVC, UCC, VFA, CFA and OTA. The base point of this thesis was designed frequency filters with these active elements, when the shape of the transfer function will be identical for all structures and compare the characteristics of active elements. The proposed frequency filters are second order with one or two active elements. In the first part of thesis are discussed basic properties of frequency filters, their properties and distribution. Next are described the general characteristics of active filters and their basic elements such as operational amplifier OTA, VFA and CFA, and recently more frequently used voltage and current conveyor. The second part is the frequency filters designed with these elements is the same transfer function. Subsequently, simulations are done all the filters and obtained the frequency response. Finally, these filters are experimentally made and made practical measurements.
9
Szabó, Zoltán. "Příspěvek k optimální syntéze filtračních obvodů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-233563.
Full textAbstract:
The presented dissertation thesis is focused on the optimization of filtering circuit synthesis. In the five main sections of this work, the author analyzes partial problems related to several areas within the synthesis of modern filtering circuits. The first chapter constitutes an examination of elementary aspects which characterize present-day integrated circuits in voltage feedback operational amplifiers, and this main content is further complemented with a view on possible application of these circuits for the designing of filtering circuits as proposed within subsequent parts of the thesis. In this context, the second chapter contains a description of the design and optimization of digitally controlled universal filters tunable by means of digital potentiometers originally produced for audio technology. These digitally controlled circuits are increasingly utilized as analog preprocessing blocks in digital signal processing systems. The most extensive portion of the dissertation is dedicated to a complex analysis of individual configurations of economical, purposely lossy active function blocks and modern voltage operational amplifiers. This part of the thesis aims at providing a detailed insight into the characteristics of individual configurations of examined circuits; furthermore, in this respect, the author proposes a comparison of various application possibilities relating to these circuits and their wider use in the field of active frequency filters optimization. The described section of the work also includes a definition and examples of application of the designed and realized program, which facilitates significant simplification of purposely lossy ARC filters. In the penultimate part of the dissertation thesis, the design, development, and verification of a suitable synthesis procedure are presented together with the optimization of data and (in particular) power models of EMC filters. Based on the verification of characteristics inherent with the designed models of EMC filters, the suggested measuring procedure related to these filters is described, including the design of a station for measuring elementary parameters of line anti-interference devices up to very high frequencies. In the last section of the thesis, the author discusses the procedure of air ions concentration measurement through an aspiration condenser and analyzes the systematic and random errors as well as the optimization of filtration characteristics of the applied measurement method. This part includes the description of the design and characteristics of the realized fully automated measurement system with an aspiration condenser.
10
Zapletal, Miroslav. "Diferenční kmitočtové filtry neceločíselného řádu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-317022.
Full textAbstract:
This diploma thesis is concentrated to fully differential and non-differential fractional-order filters with active elements. It describes how we can obtain fractional-order fully-differential filters design from non-differential design, thesis describes realization in OrCad program and simulation of this project. The first part of the thesis concerns theoretical analysis of frequency filters, active elements and fractional-order filters. The second part of the thesis includes designs of filters and simulations of differential structures and rest of non-differential structures simulation. The following part of the thesis concerns practical realization and experimental measurment of differential fractional-order filter. In the last part of this project, thesis evaluates all results which were revealed in our simulations and experimental measurment.
11
Jeleček, Jiří. "Pseudo-diferenční kmitočtové filtry vyššího řádu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-401954.
Full textAbstract:
This Master's thesis deals with pseudo-differential frequency higher order filters working in voltage mode. The thesis deals with the description of frequency filters, their types and applications. Follows an analysis of differential and pseudo-differential transmissions. Next part contains a description of used active elements (conveyors) at thesis (CCII, DVCC, DDCC, UCC). In the last part the thesis is devoted to the own design of the pseudo-differential filter. Design functionality is verified by experimental simulation.
12
Sládok, Ondřej. "Diferenční a pseudodiferenční kmitočtové filtry." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241951.
Full textAbstract:
This thesis deals with fully differential and pseudo-differential frequency filters. Significant emphasis is placed on the characteristics of common-mode signal. Further, the text deals with the design issue of fully-differential structure and transformation of non-differential to pseudo-differential structures. In the thesis one non-differential structure, one fully-differential and three pseudo-differential structures are proposed, one of them working in current mode. The thesis also describes the analysis from the perspective of non-ideal properties of the active element of two circuit solutions, which is trying to find the optimal solution. In each case, functionality of new solutions is verified by simulations and in several cases also by experimental measurement.
13
Matejov, Michal. "Pasivní PFC filtry pro spínané napájecí zdroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217598.
Full textAbstract:
This work deals with theory of switched power sources. There is description of the ways for connection and their practice purposes. In the next parts there are defined requirements on input supply circuit for these sources, especially for the form of output current. There are mentioned the basic connecting methods of PFC circuits and these methods modify the output current to meet the requirements of specification ČSN EN 61000- 3- 2. In the next parts there are shown simulations of PFC circuits made by Pspice application. Further is the basic description of sources construction for the sources which were used for testing and measuring. The final part deals with evaluation of the measuring on the chosen computer’s source. It compares between the manufacturer’s solutions and PFC circuit made by ourselves.
14
Friedl, Martin. "Syntéza moderních struktur kmitočtových filtrů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-233634.
Full textAbstract:
Within modern frequency structures, the filter frequency region of up to 10 MHz constitutes a promising research topic that currently attracts intensive attention of specialists interested in the problem. The main reason of this fact consists in that the rapid development of modern technology allows the production of innovated structures of the analog frequency filters required in the defined band. In this context, however, it is also necessary to refine the methods applied in the synthesis and optimization of these structures; such improvement should be carried out with respect to fundamental properties and usability of today's active elements (operational amplifiers with voltage feedback whose Gain Bandwidth Product ranges within units of GHz, operational amplifiers with current feedback, conveyors, transimpedance operational amplifiers). In this thesis, active blocks of synthesis inductors (SIs) and frequency dependent negative resistors (FDNRs) are examined in detail, and the author provides novel formulas to define the basic parameters of the dual circuits. Due emphasis was placed on optimizing the basic building blocks of the second order and defining the variation of their properties caused by the addition of modern active elements. The blocks were analyzed and modified in view of their possible use in higher-order circuits. For active filters of a higher order, simulations were performed to indicate the actual sensitivity of the cascade and non-cascade ARC structures. The following phase of the research comprised mainly the designing of several filters, and this activity was further completed with the verification of the methodology for the synthesis and optimization of higher-order loss ladder filters with modern active blocks. Special attention was paid also to the methods enabling the optimization of such filters, which are invariably based on RLC prototypes. In order to verify the theoretical conclusions, the author materialized a large number of sample optimized filters and measured their parameters. The closing section of the thesis describes the use of the filters in specific applications.
15
Alsibai, Ziad. "Návrh analogových obvodů s nízkým napájecím napětím a nízkým příkonem." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-233672.
Full textAbstract:
Disertační práce je zaměřena na výzkum nejběžnějších metod, které se využívají při návrhu analogových obvodů s využití nízkonapěťových (LV) a nízkopříkonových (LP) struktur. Tyto LV LP obvody mohou být vytvořeny díky vyspělým technologiím nebo také využitím pokročilých technik návrhu. Disertační práce se zabývá právě pokročilými technikami návrhu, především pak nekonvenčními. Mezi tyto techniky patří využití prvků s řízeným substrátem (bulk-driven - BD), s plovoucím hradlem (floating-gate - FG), s kvazi plovoucím hradlem (quasi-floating-gate - QFG), s řízeným substrátem s plovoucím hradlem (bulk-driven floating-gate - BD-FG) a s řízeným substrátem s kvazi plovoucím hradlem (quasi-floating-gate - BD-QFG). Práce je také orientována na možné způsoby implementace známých a moderních aktivních prvků pracujících v napěťovém, proudovém nebo mix-módu. Mezi tyto prvky lze začlenit zesilovače typu OTA (operational transconductance amplifier), CCII (second generation current conveyor), FB-CCII (fully-differential second generation current conveyor), FB-DDA (fully-balanced differential difference amplifier), VDTA (voltage differencing transconductance amplifier), CC-CDBA (current-controlled current differencing buffered amplifier) a CFOA (current feedback operational amplifier). Za účelem potvrzení funkčnosti a chování výše zmíněných struktur a prvků byly vytvořeny příklady aplikací, které simulují usměrňovací a induktanční vlastnosti diody, dále pak filtry dolní propusti, pásmové propusti a také univerzální filtry. Všechny aktivní prvky a příklady aplikací byly ověřeny pomocí PSpice simulací s využitím parametrů technologie 0,18 m TSMC CMOS. Pro ilustraci přesného a účinného chování struktur je v disertační práci zahrnuto velké množství simulačních výsledků.
16
Vrba, Adam. "Analýza a realizace kmitočtového filtru přeladitelného změnou parametru aktivního prvku." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218675.
Full textAbstract:
This work analyzes tuning capabilities of different fully integrated active filter topologies. Work only deals with continuous time active filters. Topologies described in this work differ in type of active element and in method of frequency tuning. Techniques of tunning are proved on second order low pass filter. Filter topologies are compared from tunning capabilities and from point of total harmonic distortion. The main building block of all filters is integrator.
17
Vlček, Pavel. "Lineární aktivní filtr napájecího napětí „Ripple Blocker“." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221086.
Full textAbstract:
This work deals with a methods for increasing the PSRR of the linear active filters of supply voltage or if linear regulators and voltage range of supply, primarily his minimal value. In the work are used ideal parts of reference voltage source and reference current source. The work describes how to eliminate effect of feedback loop on the PSRR, how to decrrease minimal power supply voltage and how to set stability of total schematic.
18
Langhammer, Lukáš. "Plně diferenční kmitočtové filtry s moderními aktivními prvky." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-256565.
Full textAbstract:
Tato disertační práce se zaměřuje na výzkum v oblasti frekvenčních filtrů. Hlavním cílem je navrhnout a analyzovat plně diferenční kmitočtové filtry pracující v proudovém módu a využívající moderní aktivní prvky. Prezentované filtry jsou navrženy za použití proudových sledovačů, operačních transkonduktančních zesilovačů, plně diferenčních proudových zesilovačů a transrezistančních zesilovačů. Návrh se zaměřuje na možnost řídit některý z typických parametrů filtru pomocí řiditelných aktivních prvků, které jsou vhodně umístněny do obvodové struktury. Jednotlivé prezentované filtry jsou navrženy v nediferenční a diferenční verzi. Velký důraz je věnován srovnání plně diferenčních struktur s jejich odpovídajícími nediferenčními formami. Funkčnost jednotlivých návrhů je ověřena simulacemi a v některých případech i experimentálním měřením.
19
Peloušek, Jan. "Sledování obličejových rysů v reálném čase." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218823.
Full textAbstract:
This thesis considers the problematic of the object recognition in a digital picture, particularly about the human face recognition and its components. There are described the basics of the computer vision, the object detector Viola-Jones, its computer realization with help of the OpenCV libraries and the test results. This thesis also describes the accurate system of the facial features detection per the algorithm of the Active Shape Models and also related mechanism of the classifier training, including the software implementation.
20
Jeřábek, Jan. "Kmitočtové filtry s proudovými aktivními prvky." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-233528.
Full textAbstract:
This doctoral thesis is focused mainly on research of new current active elements and their applications in frequency filters suitable for current-mode. Work is focused on design of new filtering structures suitable for traditional single-ended signal processing and also on structures suitable for fully-differential applications. The thesis contains three designed general conceptions of KHN-type second-order filters. Adjustability of quality factor and pole frequency is provided by controllable current amplifiers that are placed properly in designed structures. Structures also contain second-generation current conveyors, multiple-output current followers, transconductance amplifiers and their fully-differential equivalents. There are lot of possible solutions that could be obtained from general structures, some of them are presented in the work. The thesis also presents several multifunctional and also single-purpose filtering structures of second-order and two variants of n-th order synthetic elements which are suitable to realize higher order filters both in single ended and fully differential type. In each case, functionality of new solutions is verified by simulations and in several cases also by real measurement.
21
Vencálek, Roman. "Univerzální aktivní prvky a jejich využití v kmitočtových filtrech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218092.
Full textAbstract:
This master’s thesis deals with the advanced universal modern active elements, such as the current and voltage conveyors. The problem with small bandwidth has been fixed due to the quick development in recent years. Current and voltage conveyors are still being researched. The good properties of conveyors promise their possible commercial usage in the future. For the research of current conveyors we can use parts of other integrated circuits and thus get elements with similar properties. This thesis suggests how to make an active filter using the DBTA and FDBTA elements which were created by “combination” of the universal current and voltage conveyor. Simulations were carried out on selected circuits containing the DBTA to verify their properties. It was for finding out about their behaviour in real applications that the circuits were constructed. This enabled the comparison of the results acquired from the simulation programs with the ideal behaviour of the elements and with the models simulating real properties against the values acquired by measurements of the circuits.
22
Vávra, Jiří. "Aktivní obvodové prvky s proudovými vstupy a výstupy a jejich aplikace." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-233552.
Full textAbstract:
The thesis deals with definitions of new current- or mixed-mode circuit elements and their implementations and applications. Based on the analysis of the state-of-the-art, novel application circuits employing the above circuit elements are designed. For the purpose of the experimental verification, the active elements are implemented via commercial integrated circuits, and their applications are simulated via PSpice. The application circuits are focused on frequency filters, rectifiers, oscillators, and current-copy circuits. Selected applications are analyzed with respect on real influences, and measurements on circuit prototypes are also performed.
23
Preclík, Milan. "Řiditelné kmitočtové filtry s moderními aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218298.
Full textAbstract:
The work deals with design of transformation cells suitable for realization of higher orders frequency filters with possibility of cutoff frequency control. At first, there is a common description of frequency filters and active elements like current and voltage conveyors. Furthermore assumptions of cutoff frequency control are defined which result in a convenient characteristical equation. Phylosophy of synthetic elements DP , EP , DS , ES including a possibility of change of cutoff frequency is next in line. By exploitation of synthetic elements theory new circuit’s schemes of transformation cells are searched. The work continues with the choice of appropriate transformation cells for resulting circuit’s solutions of frequency filters with possibility of cutoff frequency control by using transfer coefficients of active elements or with help of passive elements. The work concludes with verification of its proper function based on a simulation executed in OrCAD and with practical implementation of choosen circuit’s solution.
24
Kubík, Milan. "Diferenční kmitočtové filtry s moderními aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218832.
Full textAbstract:
The master thesis focuses on design of fully-differential frequency filters with modern active components in current mode. First part informs about problems concerning analogue frequency filters and creating differential structures. Second part deals with methods of create filters and used active components - DACA (Digital Adjustable Current Amplifier) and MO-CF (Multiple Output Current Follower). Own design of differential filters is divided on two parts. In the first part of design results there are filters created with synthetic higher-order elements. There are presented circuit structures implementing the third order low pass filter and high pass filter. In the second part are designed filters with signal flow graphs. The first circuit implementing low pass, high pass, band pass, band rejection and all-pass filter. The second circuit is with help of the same set of current amplification by DACA components tuning of the natural frequency. For this circuit was make sensitivity analysis. In the final part is practical implementation of the differential frequency filter for tuning of the natural frequency and summarises the thesis.
25
Herencsár, Norbert. "Nové aktivní funkční bloky a jejich aplikace v kmitočtových filtrech a kvadraturních oscilátorech." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-233510.
Full textAbstract:
Kmitočtové filtry a sinusoidní oscilátory jsou lineární elektronické obvody, které jsou používány v široké oblasti elektroniky a jsou základními stavebními bloky v analogovém zpracování signálu. V poslední dekádě pro tento účel bylo prezentováno velké množství stavebních funkčních bloků. V letech 2000 a 2006 na Ústavu telekomunikací, VUT v Brně byly definovány univerzální proudový konvejor (UCC) a univerzální napět'ový konvejor (UVC) a vyrobeny ve spolupráci s firmou AMI Semiconductor Czech, Ltd. Ovšem, stále existuje požadavek na vývoj nových aktivních prvků, které nabízejí nové výhody. Hlavní přínos práce proto spočívá v definici dalších původních aktivních stavebních bloků jako jsou differential-input buffered and transconductance amplifier (DBTA), current follower transconductance amplifier (CFTA), z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), generalized current follower differential input transconductance amplifier (GCFDITA), voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), a minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Pomocí navržených aktivních stavebních bloků byly prezentovány původní zapojení fázovacích článků prvního řádu, univerzální filtry druhého řádu, ekvivalenty obvodu typu KHN, inverzní filtry, aktivní simulátory uzemněného induktoru a kvadraturní sinusoidní oscilátory pracující v proudovém, napět'ovém a smíšeném módu. Chování navržených obvodů byla ověřena simulací v prostředí SPICE a ve vybraných případech experimentálním měřením.
26
Suchánek, Tomáš. "Elektronicky řiditelné kmitočtové filtry s proudovými aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219289.
Full textAbstract:
The aim of the thesis is to study the possibilities of the electronic frequency ?lter com- posed of active elements operating in current mode. The main opportunities lie in the change control parameters, most are marginal or quality factor frequency. As the active elements are considered especially CC (Current Convejor), controllable current ampli?er DACA (Digitally Adjustable Current Ampli?er) or combination with the current tracker MO-CF (Multiple Output Current Follower). Another part will focus on the management of the above parameters using digital potentiometers and choosing the appropriate ?lter structure. The ?nal task was to digital control parameters using a PC and measuring its properties.
27
Omasta, Zdeněk. "Vybrané metody návrhu kmitočtových filtrů s netradičními aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218093.
Full textAbstract:
This master’s thesis is bent on comparison of four newest method of analog frequency filter design. After the introductory part, a description of properties and internal structure of active elements (Second-Generation Current Conveyor), VG-CCII (Variable Gain Current Conveyor), VCG-CCII (Voltage and current gained second generation current conveyor) a CFTA (Current Follower Transconductance Amplifier) is mentioned. This active elements are used in subsequent design. At the next part, process of frequency filters design by generalized method of filter design flowing from the full admittance network, by extending autonomous circuits, design using the signal flow graphs theory and design with synthetic high-order elements are presented. Thirty nine autonomous circuits are derived from full admittance networks with one and two active elements CFTA. Selected autonomous circuits are used for direct design of frequency filter and for filter design by extending autonomous circuits. Produced structures guarantee the possibility of controlling the quality factor Q0 independently of the characteristic frequency f0. Three frequency filters are designed by method using the signal flow graph theory. Active elements CFTA, VG-CCI and VCG-CCII are used. Full multifunctional frequency filter with conveyors VG-CCII and VCG-CCII guarantee the possibility of controlling the quality factor Q0 and the characteristic frequency f0 independently of the each other. In last part, from 2nd to 5th order low-pass filters by the method using synthetic high-order elements are designed. The behaviour of the selected filters has been verified by simulations in the PSpice program for all of the mentioned methods separately.
28
Pavelková, Renata. "Příprava a charakterizace biomateriálů s obsahem aktivních přírodních UV filtrů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2017. http://www.nusl.cz/ntk/nusl-316148.
Full textAbstract:
This presented diploma thesis is focuses on preparation and characterization of biomaterials with natural UV filters. The theoretical part is aimed at effects of sunlight on the skin and how to avoid these effects by using cosmetic products. The materials and methods for extraction of lipid part of the selected vegetable and microorganism species and methods for preparation and characterization of nanoparticles and emulsions were characterized. The practical part deals with extraction of lipid part of selected vegetable and microorganism species. The liposome particles with encapsulated active compounds were prepared. The particle size, polydispersity index, colloidal stability, encapsulation efficiency, SPF, antioxidant capacity, phospholipid content and cytotoxic effect on human keratinocytes were observed. These particles were used for preparation of the resulting emulsions. Their protection level on UV light were set and stability were tested by using analytical centrifugation.
29
Pánek, David. "Syntéza diferenčních filtračních struktur se složenými aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399604.
Full textAbstract:
This document is focused on already existing single-ended frequency filters with modern active components working in current mode and their modification into fully-differential ended form. After the modification both versions were compared between each other. The first part informs about problems concerning analogue frequency filters. The second part deals with used active components - MO-CF (Multiple Output Current Follower), BOTA (Balanced transconductance amplifier), UCC (universal current conveyor), VDTA (Voltage differencing transconductance amplifier), CDTA (Current differencing transconductance amplifier) and VDCC (voltage differencing current conveyor). Four circuits have been chosen and transformed into their differential form. Two circuits have been chosen and realised into PCB and then practicaly measured in a laboratory. The last part is a summary of simulations and measured results and check of circuits behavior result.
30
Cupák, Jan. "Nízkofrekvenční zesilovač ve třídě D pro aktivní reproduktory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219135.
Full textAbstract:
This master's thesis deals with design of D class audio final amplifier, which was output power 400 W for 4 ? load impedance. Designed audio amplifier is specifical for active speaker, which consists of satelite speakers and subwoofer. Further more it deals also with other functional blocks, e.g. balanced input preamplifier, active crossover and protection for safety running. Outcome of this work are schemes of each functional blocks of D class audio amplifier, whose functionality was verified by simulation. Thesis also contains full reference material including mechanical arrangement of functional blocks on printed connection board. The conclusion contains the measured parameters of function blocks of produced prototype and complete photographic documentation.
31
Khatib, Nabhan. "Obvody pro analogové zpracování signálů na bázi nekonvenčních aktivních prvků." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-233586.
Full textAbstract:
Disertační práce se zabývá zaváděním nových struktur moderních aktivních prvků pracujících v napěťovém, proudovém a smíšeném režimu. Funkčnost a chování těchto prvků byly ověřeny prostřednictvím SPICE simulací. V této práci je zahrnuta řada simulací, které dokazují přesnost a dobré vlastnosti těchto prvků, přičemž velký důraz byl kladen na to, aby tyto prvky byly schopny pracovat při nízkém napájecím napětí, jelikož poptávka po přenosných elektronických zařízeních a implantabilních zdravotnických přístrojích stále roste. Tyto přístroje jsou napájeny bateriemi a k tomu, aby byla prodloužena jejich životnost, trend navrhování analogových obvodů směřuje k stále většímu snižování spotřeby a napájecího napětí. Hlavním přínosem této práce je návrh nových CMOS struktur: CCII (Current Conveyor Second Generation) na základě BD (Bulk Driven), FG (Floating Gate) a QFG (Quasi Floating Gate); DVCC (Differential Voltage Current Conveyor) na základě FG, transkonduktor na základě nové techniky BD_QFG (Bulk Driven_Quasi Floating Gate), CCCDBA (Current Controlled Current Differencing Buffered Amplifier) na základě GD (Gate Driven), VDBA (Voltage Differencing Buffered Amplifier) na základě GD a DBeTA (Differential_Input Buffered and External Transconductance Amplifier) na základě BD. Dále je uvedeno několik zajímavých aplikací užívajících výše jmenované prvky. Získané výsledky simulací odpovídají teoretickým předpokladům.
32
Voráč, Ladislav. "Řiditelné filtry s maximálním možným přeladěním a netradičními aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218353.
Full textAbstract:
The thesis is paid to design frequency filters steerable jet active elements of the MO–CF (Multiple-Output Current Follower) and also newly-developed current active element DACA (Digitally Adjustable Current Amplifier) in the company ON Semiconductor. The first three chapters focus on basic properties of frequency filters, used components and circuit design methods. The digitally controllable current amplifier DACA is used for managing the radio frequency filters and adjust it using the current amplification parameter A through the digital input CTR. For the design of filters of the second order a method of M-C Signal flow graphs is used. This method is in the work proved very useful and contributed to the modification of already designed frequency filters. The fourth chapter describes the actual detailed design of circuits with quality management, or marginal frequencies to the two parameters. Involvement of the proposed filter is simulated in the OrCAD program for different levels of models of the circuit elements. At the end of each filter design there is a comparison of theoretical and simulated values of the adjustable parameters circuit. The conclusion was one of the districts selected for experimental verification, followed by comparing the measured and simulated transmission characteristics.
33
Jašek, František. "Návrh nových aktivních filtrů pomocí grafů signálových toků." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218236.
Full textAbstract:
This master’s thesis describes the design of the frequency filters by the help of the graph of the signal flows. There are defined by modern components like GVC (Generalized Voltage Conveyor), GCC (Generalized Current Conveyor), CF (Current Follower), DO-CF (Dual-Output Current Follower), OTA (Operational Transconductance Amplifier), BOTA (Ballanced Operational Transconductance Amplifier) and CFTA (Current Follower Transconductance Amplifier), the graphs of the signal flows, which describe their activity in the thesis. In the other part of the thesis is illustrated the procedure of the design of the frequency filters by the help of the graphs of the signal flows. For the concrete design was selected in the first case as the active component double output current follower and in the second case the CFTA. There are noted all designed circuits of the frequency filters also their characteristic equations in this thesis. The activity of the selected circuits was remitted to the analysis in the simulation program called PSpice. Because the active components, with which was engaged in the design of the filter which doesn’t exist in the real form, that is why the UCC, which is sufficing for attestation of the function of the circuit, was used for the simulation. The simulation was implemented in the frequency range 10 Hz to 10 MHz.
34
Polášek, Lubomír. "Návrh řiditelných diferenčních filtrů s proudovými aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218354.
Full textAbstract:
The master thesis deals with design of the fully differential frequency filters working in the current mode and is focused on possibilities of the natural frequency and the quality factor adjustment. At the beginning, there is a brief description of frequency filters and active elements (MO-CF, FD-CF and DACA), which are used in the thesis. Furthermore, simplified signal flow graphs design method and transformation of passive and active elements to the differential structures are described. The designs of four differential circuitries which provide possibility of tuning the natural frequency or quality factor by the gain of the DACA element are shown in the thesis. Simulation results made in OrCAD program with help of third-order models are included. The practical implementation of the differential frequency filter for tuning of the natural frequency by the DACA elements is shown in the last chapter.
35
Urban, Lukáš. "Laboratorní úloha zaměřená na obvody se spínanými kapacitory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217788.
Full textAbstract:
This Master`s thesis is focused on through acquaintance of principles of the function circuits with switched capaticors and posibility of their application mainly in frequency filters or signal generators. The origin of the switched capacitor circuits is mentioned at the beginning of the work. There are references to the first scientific work and scientists who have dealt with this issue. Maxwell`s idea: lossy element (resistor) replace with lossless element (switched capacitor) in electric circuit, is further described. In the next chapter of this work are listed types of switching capacitors and their use in simple RC filters and in structures of inverted or noninverted integrators and their application in more complex higher order filters. The advantages and disadvantages of SC circuits versus circuit composed of discrete components are shown. It is also listed a simple low-pass switched RC filter implemented with analogue multiplexer 4053. Using the LTC1043 integrated circuit, which structure and properties are described and analyzed in detail in the work, the 1st order aktive or pasive low and high pass filters were designed and subsequently simulated in the computer simulator OrCAD PSpice v.10. Another chapter deals with the integrated circuits higher order filters, structure and properties of the integrated filter LTC1060 are further analyzed here. Except this IC there are mentioned integrated filters commercially less available from the corporations Linear Technology and Maxim. The main objective of thesis was to propose and establish laboratory device and laboratory measurment focused on the switched capacitor circuits. The laboratory device has been designed with integrated circuits LTC1043 and LTC1060, which is demonstrated by using passive and active integrator, 2nd order band-pass and 4th order band-pass with Chebyshevovou approximation.
36
Šerík, Martin. "Řídící jednotka pro DSP zpracování a distribuci zvukového signálu pro externí aktivní reproduktory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219964.
Full textAbstract:
The paper deals with analysis of the problems of digital signal processing and with design of the control unit for DSP and audio signal distribution to active external loudspeakers. It describes function of delta-sigma AD converters, the most widely used digital filters and Fast Fourier Transform. The processed signal will be send to external loudspeakers using an Ethernet interface. The paper also covers the design of signal processing unit's hardware and software. Achieved functions and parameters of the unit are discussed in conclusion.
37
Muzikářová, Věra. "Testování náplní bariérového filtru pro čištění plynu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443178.
Full textAbstract:
This diploma thesis deals with the issue of pollution of the generated gas during gasification. It consists of two parts. The first part is theoretical, where there is a search describing the course of gasification. There is also an overview of impurities in the generated gas and a description of methods suitable for gas purification. The second part of the work is focused experimentally, where various fillings of the barrier filter are tested during gas cleaning.
38
Prát, Marek. "Návrh elektronicky rekonfigurovatelných filtračních struktur s moderními aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377113.
Full textAbstract:
The aim of master's thesis was design of electronically reconfigurable filters. Adjustability of pole frequency or quality factor is possible. First part of thesis deals with theoretical analysis of filters, their operation modes, design of frequency filters using Signal-Flow graph method and parasitic analysis. The next part describes active elements used in thesis. In a third part, three reconfigurable filters are described and designed and their simulations and parasitic analysis are made. Last part deals with filter design in EAGLE and experimental measurement.
39
Pisár, Peter. "Metody návrhu aktivních kmitočtových filtrů na základě pasivního RLC prototypu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218107.
Full textAbstract:
The aim of this diploma thesis is to design active frequency filters based on passive RLC prototype. Three methods of the design of active filters and active functional blocks of electronic circuits working in current or mixed mode are used to this purpose. These blocks allow to process electrical signals with frequencies up to low tens of megahertz. In addition they feature for instance with high slew rate and low supply voltage power. Active high-pass and low-pass 2nd order filters are designed using simulation of inductor by active subcircuit method. Grounded and subsequently floating synthetic inductor is made with the current conveyors in the first case and with the current operational amplifiers with single input and differential output in the second case. This method advantage is relatively simple design and disadvantage is great quantity of active functional blocks. Active filters based on passive frequency ladder 3rd order filter while only one floating inductor is connected, are designed with circuit equation method. In the first design differential input / output current followers are used and in the second case current-differencing buffered amplifiers are used. This method benefits by smaller active blocks number and disadvantage is more complex design of the active filter. Active filter based on passive prototype of low-pass 3rd order filter with two floating inductors is designed with Bruton transformation method. Final active filter uses current operational amplifiers with single input and differential output which together with other passive elements replace frequency depending negative resistor, which arise after previous Bruton transform. This method usage is advantageous if the design consists of larger quantity of inductors and less number of capacitors. High-pass 2nd order filter is simulated by tolerance and parametrical analyses. Physical realisation utilising current feedback operational amplifier which substitute commercially hardly accessible current conveyors is subsequently made. Measurements of constructed active filter show that additional modifications, which allow better amplitude frequency characteristics conformity, are necessary.
40
Mráka, Michal. "Syntetické imitanční dvojpóly s proudovými aktivními prvky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218069.
Full textAbstract:
This master thesis discusses the design of Synthetic immittance dipoles using active current elements. The introduction presents aktive current elemetns MO-CF and DACA as buildings blocks for analog filters that are able to process signals with frequencies up to ten megahertz. Methods of synthetic elements using active current elements design is described in this thesis.Is resulted from full addmitances net which contains one active current element Subsequently there are designed various types of frequency filters working in current mode. The functionality of designed filters was verified by computer simulation. Selected designed filter were practically verified with commercially available elelments and active element MO-CF. Measurements in the frequency domain were carried on. On all of types of filters are made sensitivity analysis.
41
Stelzig, Berthold L. "Untersuchung eines monolithisch-integrierten aktiven optischen Schmalbandfilters mit einstellbarem Frequenzgang." kostenfrei, 2008. http://d-nb.info/990692574/34.
Full text
42
Uchytil, Filip. "Návrh a realizace aktivních reproduktorových soustav s digitálním vstupem." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219441.
Full textAbstract:
The work is focused on a design of an active loudspeaker system with a bi-amp amplifier and a digital input. There is described the theory of a loudspeaker enclosure design and its practical implementation. Furthermore the work deals with a design and construction of input circuits such as a preamplifier, Baxandall tone control, active crossover, all-pass filter and S/PDIF. On the basis of the amplifier´s theory the optimal construction of amplifiers and their design are selected. The complex design of the loudspeaker box is devised so that it would reach a maximum acoustic power during the preservation of a low distortion.
43
Dohnal, Pavel. "Napěťové konvejory v lineárních blocích." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218296.
Full textAbstract:
The main goal of this diploma thesis will be realization of tunable frequency filters using voltage conveyors, that are only little explored yet. At the beginnig of diploma thesis the frequency filters and their types will be defined. The theory of voltage conveyors based on principle of duality results from the character of current conveyors. Accordingly these active components will be closely presented. At first there will be defined individual types of voltage conveyors and their closer characteristics. Then design methods of frequency filters using unconventional active components will be described. There will be defined the method of the total admitance net, subsequently design using synthetic components and at the end there will be presented method using follow graphs that will be used to design concrete circuit solution. Using follow graphs method will be found circuit solutions of current structures with unconventional active components. During searching circuit solutions will be very important the posibility to operate the quality factor. That can be obtained by two ways. One way is the activ operation which is done by coeficients of the activ component. Other way is operating using the passiv component. There are found 26 circuits that realize condition of active operating using two active and four passive components. One of these circuits will be chosen and simulated in simulation program PSpice. To compare both methods of operation there will be compiled some circuit with passive operating with two active and five passive components and one of the passive components will be able to operate the quality factor. This circuit will be simulated in the simulation program PSpice again. The circuit will be real compiled and experimentaly measured in laboratory. Results of this measurement will be compared with calculated values and with values acquired from the simulations.
44
Bradáč, Josef. "Aplikační možnosti řiditelného proudového zesilovače." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220619.
Full textAbstract:
This thesis deals with the application using digitally controlled current amplifiers DACA (Digitally Adjustable Current Amplifer), which was developed at the Department of Telecommunications FEEC in cooperation with ON Semiconductor in 2010. In introduction is decribed the topic of active filters and oscillators. Farther active current components, besides DACA are described current conveyor UCC (Universal Current Conveyor), current amplifier DO-CF (Dual-Output Current Follower), MO-CF (Multiple-Output Current Follower) and FD-CF (Fully Diferential Current Follower) and operational transconductant amplifier BOTA (Balanced-Output Operational Transconductance Amplifer) and MOTA (Multiple-Output Operational Transconductance Amplifier). The following is a compilation of theories circuits using signal flow graphs, which are designed using a simulated filter circuits to control the cutoff frequency or the quality factor. Then design and simulation with auxiliary oscillator circuit AGC for controlling the oscillation frequency. Simulations are conducted with ideal models and with models that include some real properties. The conclusion of this work is devoted to the printed circuit board design for a selected filter circuit realization and measurement.
45
Minarčík, Martin. "Návrh koncepce napěťového konvejoru a jeho aplikační možnosti." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-233471.
Full textAbstract:
This doctoral thesis deals with a voltage conveyor as a new active element for an analog signal processing. Various types of the voltage conveyors have been defined as a dual active elements to current conveyors based on a duality principle. Conception of a new active element that can supply all types of the voltage conveyors have been proposed. The active element has been named an universal voltage conveyor – UVC. A voltage follower is a basic building block of the UVC. The well-known circuit realization of the voltage follower comes from four transconductance amplifiers with key parameters (voltage transfer and output resistance) derived from relative accuracy of used transconductance amplifiers has been used by UVC fabrication. A new circuit realization of the voltage follower comes from three transconductance amplifiers with key parameters also derived from relative accuracy of used transconductance amplifiers has been designed. Further the doctoral thesis deals with a frequency filter with the voltage conveyors design using signal flow graphs. Various graphs of the voltage conveyors comes from the various circuit analysis methods with non-regular active elements have been created. A basic graph of the voltage conveyor has been designed with help of a known controlled sources graphs. This graph have been used to design of multifunctional frequency filters, filters with high input and low output impedance and controlled frequency filters. A design procedure have been created so that in specific step of the frequency filter design the basic graph of the voltage conveyor could be extended to graph of any type of the voltage conveyor. Thereby a practical usage of various types of the voltage conveyors has been finding out. Further a new method of frequency filter design based on expanding of the signal flow has beenproposed.
46
Mayer, Dirk. "Regelung und Identifikation aktiver mechanischer Strukturen mit adaptiven digitalen Filtern." Phd thesis, [S.l. : s.n.], 2003. http://elib.tu-darmstadt.de/diss/000384.
Full text
47
Sedlář, Petr. "Digitálně řízený rezistor." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218032.
Full textAbstract:
This master´s thesis deals with the design of the control circuits for digital potentiometers and their application in analog systems. Digital potentiometers are three-terminal resistors with an adjustable center connection. The digital potentiomneters enable to drive logic gates, LED drivers, LCD drivers, analog switches etc. Controlling of these mentioned devices is possible by the I2C 2- wire serial bus (invented by Philips). The digital potentiometers are used to control of the primary parameters like cut-off frequency and quality factor in the state variable filter and cut-off frequency in a passive filter. Both filters are simulated in PSpice and then compared with the measured results. Next parts of this master's thesis are a computer program and a exemplary protocol.
48
Venclovský, Martin. "Transformační návrhová metoda filtrů vycházející z pasivních struktur." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218095.
Full textAbstract:
This diploma thesis deals with transformation of passive elements in filter structures onto substitutes with new active element CFTA. A basic characteristic, types of filters, their frequency characteristics and a form of transfer functions are listed in an introduction. After it is introduced a development of signal flow graphs, single type of graphs and their modifications. There is specified the method Mason-Coates graphs which proves as optimal for analysis circuits. There are listed rules for a correct evaluation and make-up the graphs. Further are described active elements CFTA, CDTA and a current conveyor. There are defined active substitutes to a floating and grounded inductance, a floating capacitor and also a floating and grounded resistor in this thesis. Here, there are also designed substitutes to parallel combinations of floating passive elements. All substitutes use CFTA as an active element and the grounded capacitor as a passive element of substitute. There are presented forms of M-C graphs, transfer functions and equations for calculation passive elements of substitute at created equivalents. Functionality of designed substitutes is always verified on second order passive filters by the help of a PC simulation. There are tabular listed defined equivalents with corresponding signal graphs, transfer functions and equations for calculation capacitor of substitute are here tabular listed too. In this work there are defined two ways of connecting defined substitutes within the scope of one circuit that can be used as a simple connection or integration bounded elements. In the case of usage of the integration bounded elements it is possible to reduce total number used active elements. The usage defined substitutions are verified by way of both methods on known higher order passive frequency filter structures. Third order low pass filter is here realized and scaled in frequency scope from 100 Hz to 100 MHz.
49
Koton, Jaroslav. "Syntéza a analýza obvodů s moderními aktivními prvky." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-233476.
Full textAbstract:
The dissertation thesis deals with the synthesis and design of active frequency filters using current (CC) and voltage (VC) conveyors, or current active elements CMI (Current Mirror and Inverter), MCMI (Multi-output CMI) and PCA (Programmable Current Amplifier). As introduction, these active elements are described as suitable for the design of the circuits working in the voltage-, current,- ,and mixed-mode, or in pure current-mode speaking about the current active elements. The new frequency filter structures presented in this thesis using the above mentioned active elements were designed by the generalized autonomous circuit method, transformation cells and signal flow-graph theory. The generalized autonomous circuit method is based on full admittance network to which generalized active elements are connected. The described admittance networks can be used for other active elements. The next method is based on the transformation cells that subsequently are used for the design of synthetic elements with higher-order imittance. Original conditions for the design of such blocks are given that lead to maximal simplicity of the final structure with minimal number of passive and active elements. For effective usage of another method utilizing signal flow-graphs, new reduced graphs of chosen active elements are given. Their usage leads to direct function blocks synthesis with required properties. The functionality and behavior of chosen circuit solutions have been verified by analyses in simulation programs. The active elements were simulated by the universal current conveyor (UCC) or universal voltage conveyors (UVC) that were designed at the FEEC, BUT in cooperation with AMI Semiconductor Design Centre Brno with the CMOS 0.35 m technology. These active elements have been also used for the realization of chosen filter structures. The experimental measurements were performed in the in the frequency range 10 KHz to 100 MHz.
50
Štork, Petr. "Návrh plně diferenčních kmitočtových filtrů s proudovými aktivními prvky za pomoci metody grafu signálových toků." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220632.
Full textAbstract:
This master’s thesis deals with designing of fully-differential current-mode frequency filters using signal-flow graphs method. The first part is focused on a general description of frequency filters, its function and division. Active elements that create these frequency filters, such as multi-output current follower (MO-CF), balanced or multi-output transconductance amplifier (BOTA, MOTA) and digitally adjustace current amplifier (DACA) are described in the following part. Next, problems and various techniques of designing such filters are discussed on a theoretic basis. In the remaining part of the thesis there are six circuits of frequency filters described in detail; these connections are then transferred of passive elements to a proposed connections, with the assistance of a so-called reflection. Calculations of passive form are stated, as well as results of simulations, where nondifferential and differential variations of these designed frequency filters are compared. Finaly, it has been selected some variants of designs, which has been manufactured, then measured out and resulet has been compare between each other.