Relevant bibliographies by topics / Al-Mg-Si alloy

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Al-Mg-Si alloy'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Al-Mg-Si alloy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Al-Mg-Si alloy"

1

Tokuda, Momoko, Kenji Matsuda, Takeshi Nagai, Junya Nakamura, Tokimasa Kawabata, and Susumu Ikeno. "TEM Observation of Cu and Ag Addition Al-Mg-Si Alloys." Advanced Materials Research 409 (November 2011): 81–83. http://dx.doi.org/10.4028/www.scientific.net/amr.409.81.

Full text
Abstract:
It has been known that Cu-and Ag-addition Al-1.0mass%Mg2Si alloys (Al-Mg-Si-Cu alloy and Al-Mg-Si-Ag alloy) have higher hardness and elongation than those of Al-1.0mass%Mg2Si alloy. In this study, the aging behaviour of Al-Mg-Si-Cu alloy, Al-Mg-Si-Ag alloy and (Cu+Ag)-addition Al-1.0 mass% Mg2Si alloy (Al –Mg –Si-Cu-Ag alloy) has been investigated by hardness test and TEM observation. The Al-Mg-Si-Cu-Ag alloy has the fastest age-hardening rate in the early aging period and the finest microstructure at the peak hardness among three alloys. Therefore the microstructure of the precipitate in Al–M
APA, Harvard, Vancouver, ISO, and other styles
2

Angella, Giuliano, Paola Bassani, Ausonio Tuissi, D. Ripamonti, and Maurizio Vedani. "Microstructure Evolution and Aging Kinetics of Al-Mg-Si and Al-Mg-Si-Sc Alloys Processed by ECAP." Materials Science Forum 503-504 (January 2006): 493–98. http://dx.doi.org/10.4028/www.scientific.net/msf.503-504.493.

Full text
Abstract:
A study was carried out on a ECAP processed Sc-containing Al-Mg-Si alloy and on a reference 6082 alloy to investigated grain structure evolution during severe plastic deformation and post-ECAP aging behaviour. The results showed that the mechanism of ultrafine structure development was substantially unchanged with respect to a reference Sc-free alloy. Also the aging sequence and precipitation kinetics of the two alloys revealed to be comparable. The ECAP processed samples of the 6082 reference alloy showed a clear recrystallization peak at temperatures in the range 315-360°C, depending on the
APA, Harvard, Vancouver, ISO, and other styles
3

Tokuda, M., K. Matsuda, T. Nagai, T. Kawabata, J. Nakamura, and S. Ikeno. "Hrtem Observation of the Precipitates in Cu and Ag Added Al-Mg-Si Alloys." Archives of Metallurgy and Materials 58, no. 2 (2013): 363–64. http://dx.doi.org/10.2478/v10172-012-0200-7.

Full text
Abstract:
It has been known that Cu- and Ag-added Al-1.0mass%Mg2Si alloys (Al-Mg-Si-Cu alloy and Al-Mg-Si-Ag alloy) have higher hardness and elongation than those of Al-1.0mass%Mg2Si alloy. In this study, the aging behaviour of Al-Mg-Si-Cu alloy, Al-Mg-Si-Ag alloy and (Cu+Ag)-addition Al -1.0 mass% Mg2Si alloy has been investigated by hardness test and TEM observation. The Al-Mg-Si-Cu-Ag alloy has the fastest age-hardening rate in the early aging period and the finest microstructure at the peak hardness among three alloys. Therefore the microstructure of the precipitate in Al-Mg-Si-Cu-Ag alloy has been
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Xiu Hai, Can Wei Lai, Man Feng Xian, and Guang Cai Su. "A Study on Thermal Fatigue Behavior of Al-Si-Mg Casting Alloys." Advanced Materials Research 881-883 (January 2014): 1355–60. http://dx.doi.org/10.4028/www.scientific.net/amr.881-883.1355.

Full text
Abstract:
The thermal fatigue behaviors of traditional Al-Si-Mg casting alloy and optimized Al-Si-Mg casting alloys at different thermal fatigue temperatures were investigated. Fatigue cracking appeared on the surface of traditional Al-Si-Mg alloy after 450 thermal cycles at 300 °C thermal fatigue temperature. However, the fatigue cracking was not found on the surface of optimized Al-Si-Mg alloy at the limited thermal fatigue cycles (less than 4450 times). Moreover, the optimized Al-Si-Mg alloy only occurred to elastic deformation and could not emerge in irreversible deformation. The grain refinement in
APA, Harvard, Vancouver, ISO, and other styles
5

Nagelberg, Alan S. "Observations on the role of Mg and Si in the directed oxidation of Al–Mg–Si alloys." Journal of Materials Research 7, no. 2 (1992): 265–68. http://dx.doi.org/10.1557/jmr.1992.0265.

Full text
Abstract:
The initiation and growth of α–Al2O3/metal composites by the directed oxidation of molten Al–Mg, Al–Si, and Al–Mg–Si alloys at 1373 and 1523 K were investigated. Spontaneous initiation and growth occurred only on the ternary Al–Mg–Si alloy. Growth also occurred on the Al-Mg binary alloy, but in this case initiation required the mechanical disruption of the protective oxide formed during initial heating to the growth temperature. In addition, mechanical disruption of the protective oxide scale on the Al–Mg–Si alloy enhanced growth initiation. Growth on the Al–Si alloy could not be induced under
APA, Harvard, Vancouver, ISO, and other styles
6

Matsuda, Kenji, Junya Nakamura, Keisuke Yamamoto, Tokimasa Kawabata, Yasuhiro Uetani, and Susumu Ikeno. "TEM Observation of Metastable Phases in Aged Al-Mg-Ge Alloys." Materials Science Forum 654-656 (June 2010): 930–33. http://dx.doi.org/10.4028/www.scientific.net/msf.654-656.930.

Full text
Abstract:
The purpose of study is to investigate aging behavior, crystal structures of metastable phase and relative frequency of metastable phases in aged Al-Mg-Ge and Al-Mg-Ge-Si alloys using high resolution transmission electron microscope (HRTEM), energy dispersive X-ray spectroscopy (EDS) and electron energy-loss spectroscopy (EELS). Every alloy included rod-shaped precipitate which is the same as the typical metastable pahse, ’, in Al-Mg-Si alloy. Except to Mg-rich alloys, the Type-A precipitate, which is a typical metastable phase in the excess Si type Al-Mg-Si alloys and popular at over aged co
APA, Harvard, Vancouver, ISO, and other styles
7

Triveño Rios, C., Claudemiro Bolfarini, Walter José Botta Filho, and Claudio Shyinti Kiminami. "Rapidly Solidified Al-Si-Mg Alloy." Journal of Metastable and Nanocrystalline Materials 20-21 (July 2004): 594–98. http://dx.doi.org/10.4028/www.scientific.net/jmnm.20-21.594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Takata, Ken, Kohsaku Ushioda, and Masao Kikuchi. "Precipitation Behaviour of Mg and Si at RT in Pre-Aged Al-Mg-Si Alloys." Materials Science Forum 519-521 (July 2006): 233–38. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.233.

Full text
Abstract:
The precipitation behavior of Mg and Si during storage at RT in Al-Mg-Si alloys pre-aged at 90°C was studied using a tensile test and differential scanning calorimetry (DSC) measurement. Specimens were solutionized at 530°C, water-quenched and then pre-aged for 2, 6 and 12 hours at 90°C during which small precipitates were formed. In the pre-aged alloy, the strengthening rate at RT has two stages. In the initial stage, the yield strength increases slowly with the aging time and in the final stage, it increases rapidly. In the initial stage, the strength in the pre-aged alloy is smaller than th
APA, Harvard, Vancouver, ISO, and other styles
9

Haga, Toshio, Keisuke Oida, Hisaki Watari, and Shinichi Nishida. "Roll Casting of Al-Mg-Si Alloy." Key Engineering Materials 880 (March 2021): 3–8. http://dx.doi.org/10.4028/www.scientific.net/kem.880.3.

Full text
Abstract:
The aluminum alloy Al–5%Mg–2%Si, the chemical content of which is close to that of the Magsimal-59 aluminum alloy commonly for die casting, was successfully cast into strips using a vertical high-speed twin-roll caster at a speed of 30 m/min. This means that Al–5%Mg–2%Si is suitable for the high-speed twin roll-casting. The as-cast Al–5%Mg–2%Si strip was then successfully cold-rolled to a thickness of 0.7 mm. Tension and cup tests were conducted on the cold-rolled annealed strips. The tensile stress was 205 MPa and the elongation was 20% for a thickness of 1 mm. The limiting drawing ratio was
APA, Harvard, Vancouver, ISO, and other styles
10

Kim, Seong Nyeong, Equo Kobayashi, and Tatsuo Sato. "Formation Behavior of Nanoclusters in Al-Mg-Si Alloys with Different Mg and Si Composition." Materials Science Forum 794-796 (June 2014): 957–62. http://dx.doi.org/10.4028/www.scientific.net/msf.794-796.957.

Full text
Abstract:
Two types of nanoclusters are formed during low temperature aging and play important roles in age-hardening of Al-Mg-Si alloys. The formation behavior of these nanoclusters depends on the alloy composition and heat-treatment process. In this work, the various alloys with different Mg and Si concentration were used in order to clarify the influence of alloy composition on the nanocluster formation using differential scanning calorimetry (DSC), hardness and electrical resistivity measurements. Based on the DSC results, two overlapped exothermic peaks were clearly detected, showing the formation
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Al-Mg-Si alloy"

1

Gehanno, Hervé. "Comportement à chaud d'alliages Al-Si-Mg." Grenoble INPG, 1995. http://www.theses.fr/1995INPG0041.

Full text
Abstract:
L'objectif est de pouvoir expliquer les proprietes mecaniques d'un alliage complexe l'as7g05 (al+7%si+0,48%mg) utilise pour la fabrication de culasses automobiles. La methode adoptee consiste a decomposer cet alliage hypoeutectique en deux alliages elementaires a la microstructure plus simple: l'alliage 6063 (al+0,52%mg+0,42%si) sur lequel on etudie l'effet du durcissement structural a chaud et l'alliage as12(al+12%si) grace auquel on explique le comportement de la phase eutectique. Dans ce travail, nous modelisons le comportement mecanique en partant d'une caracterisation detaillee de la micr
APA, Harvard, Vancouver, ISO, and other styles
2

Xie, Yun. "Development of Al-Mg-Si aluminium alloys for automobile applications." Thesis, University of Nottingham, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.366371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Granholt, Jason Daniel David A. "Precipitate Structure Changes during Overaging in an Al-Mg-Si Alloy." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for fysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-18908.

Full text
Abstract:
Starting from a super saturated solid solution and two different conditions withβ′′ precipitates (T6) an Al-Mg-Si alloy was heat treated at 200◦C and investigated byhardness measurements. One of the T6 conditions was investigated with transmissionelectron microscopy (TEM). The phase transformation to post-β′′ was studiedwith TEM and there was found that post-β′′ phases nucleated on the β′′ particles.After longer overaging times the growths were larger. A simple model wa
APA, Harvard, Vancouver, ISO, and other styles
4

Dighe, Manish D. "Quantitative characterization of damage evolution in an Al-Si-Mg base cast alloy." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/20219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Watson, Douglas. "Microstructure and mechanical properties of ductile die-cast Al-Mg-Si-Mn alloys." Thesis, Brunel University, 2015. http://bura.brunel.ac.uk/handle/2438/12874.

Full text
Abstract:
Aluminium alloys have been seen a dramatic increase in transport manufacturing in past two decades. This is primarily driven by the achievement of effective weight-savings, increased vehicle fuel efficiency and reduced CO2 emissions in transport. One of the significant progresses in most recent years has been in the application of aluminium-intensive car body structure, in which the manufacturing of thin wall castings with improved ductility is one of the critical issues. High pressure die casting (HPDC) is a fast and economical near-net shape manufacturing method to produce thin wall componen
APA, Harvard, Vancouver, ISO, and other styles
6

Berezina, A. L., T. O. Monastyrska, G. I. Prokopenko, O. A. Molebny, S. S. Polishchuk, and A. V. Kotko. "Effect of Ultrasonic Impact Treatment on the Structure and Properties of Al-Mg-Si Alloy." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35272.

Full text
Abstract:
The study of the effect of ultrasonic impact treatment on the structure of Al-Mg-Si alloy surface showed that the initial structural state of the alloy significantly affected the mechanism of relaxation of internal stresses generated by shock-cyclic loading. The formation of orientation chaos observed in pre-homogenized alloy. Many nanoscale areas (20-50 nm wide and up to 80 nm long) of re-orientation matrix with random orientation formed on the surface of the specimen. After aging of the alloy to form a metastable phase, relaxation was due to the formation of non-crystallographic orientation
APA, Harvard, Vancouver, ISO, and other styles
7

Bogdanoff, Toni, and Jimmy Dahlström. "The influence of copper on an Al-Si-Mg alloy (A356) - Microstructure and mechanical properties." Thesis, Jönköping University, JTH, Mechanical Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-9480.

Full text
Abstract:
<p>Aluminum alloys are widely used in many manufacturing areas due to good castability, lightness and mechanical properties. The purpose of this research is to investigate copper’s influence on an Al-Si-Mg alloy (A356). Copper in the range of 0.6 – 1.6 wt. % has been used in an A356 aluminum based alloy. In this work a simulation of three different casting processes, sand-, die- and high pressure die-casting has been employed with the help of gradient solidification equipment. The microstructure of the samples has been studied by optical and scanning electron microscopy. Materials in both as-c
APA, Harvard, Vancouver, ISO, and other styles
8

Klarner, Andrew Daniel. "Development of Mg-Al-Sn and Mg-Al-Sn-Si Alloys and Optimization of Super Vacuum Die Casting Process for Lightweight Applications." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1515083355012541.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hatab, Ali. "Effect of Be on the nucleation and growth of ß' phase in Al-Mg-Si alloy." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ30273.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yue, Yang. "Modelling of the effects of entrainment defects on mechanical properties in Al-Si-Mg alloy castings." Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5193/.

Full text
Abstract:
Entrainment defects such as double oxide films and entrapped bubbles occur frequently in aluminium alloy castings during the mould-filling process, and are very detrimental to both mechanical properties and reproducibility of casting properties. However, the behaviour of entrainment defects in the liquid metal and their evolution during the casting process are still unclear, and the distribution of these defects in casting remains difficult to predict. An algorithm, named the oxide film entrainment model (OFEM), that has the potential to predict the formation and distribution of entrainment de
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Al-Mg-Si alloy"

1

Lillywhite, S. J. Precipitation and recrystallisation interactions during thermomechanical processing of an AL-Mg-Si alloy. UMIST, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tiryakioglu, Murat. Tensile deformation, fracture and hardness characteristics of cast Al-7wt.%Si-Mg Alloys. University of Birmingham, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Huang, Ze Wen. Study of the ageing behaviour of Al-Mg-Si 6061 and Al-Zn-Mg-Cu 7075 alloys with and without lithium additions. University of Birmingham, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

An, Yuguo. The effects of changes in strain path on the mechanical behaviour in Al-Mg-Si alloys. University of Birmingham, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Al-Mg-Si alloy"

1

Motegi, Tetsuichi, and Fumi Tanabe. "Continuous Casting of Semisolid Al-Si-Mg Alloy." In Continuous Casting. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607331.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Uetani, Yasuhiro, Nanako Mori, Masayoshi Dohi, Kenji Matsuda, and Susumu Ikeno. "Rheo-Extrusion of Hypoeutectic Al-Si-Mg-Fe Alloy." In ICAA13: 13th International Conference on Aluminum Alloys. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495292.ch251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Uetani, Yasuhiro, Nanako Mori, Masayoshi Dohi, Kenji Matsuda, and Susumu Ikeno. "Rheo-Extrusion of Hypoeutectic Al-Si-Mg-Fe Alloy." In ICAA13 Pittsburgh. Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48761-8_251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tsubata, M., Yasuhiro Uetani, Hidetoshi Takagi, Kenji Matsuda, and Susumu Ikeno. "Rheocast of Al-Si-Mg Alloy Containing 1Mass% Iron." In Advanced Materials Research. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.543.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Hui, Jinglong Liang, Dongbin Wang, and Yungang Li. "Corrosion Resistance of Hot Dipping Al–Zn–Si and Zn–Al–Mg–Si Alloy Coating." In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05861-6_114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dong, Xixi, and Shouxun Ji. "Grain Refinement of Al–Si–Mg Cast Alloys by Al3Ti3B Master Alloy." In The Minerals, Metals & Materials Series. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72284-9_43.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Schmid-Fetzer, Rainer, and Joachim Gröbner. "Thermodynamic Database for Mg-Alloys: Progress and Application to Mg-Al-Ca-Si Alloy Development." In Magnesium. Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527603565.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Park, Soo Han, and Bo Young Hur. "Rheology Characteristics of Al-Si Alloy and Mg Alloy for Metal Foam Manufacturing." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-966-0.464.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kevorkov, D., J. Gröbner, and R. Schmid-Fetzer. "Mg-alloy Database Construction: Investigation of Al-Li-Si Phase Equilibria." In Magnesium Alloys and their Applications. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607552.ch14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ji, S., W. Yang, F. Gao, D. Watson, and Z. Fan. "Effect of Iron in Al-Mg-Si-Mn Ductile Diecast Alloy." In Light Metals 2013. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663189.ch55.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Al-Mg-Si alloy"

1

Zhang, Shitao, Zhao Lu, Jiaxin Lu, et al. "Machine learning prediction of SLM hypoeutectic Al-Si-Mg alloy mechanical properties." In Fourth International Conference on Electronics Technology and Artificial Intelligence (ETAI 2025), edited by Shaohua Luo and Akash Saxena. SPIE, 2025. https://doi.org/10.1117/12.3068850.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lim, Jeong-Min, Seung-Ho Ahn, Byung-Su Kim, and Jung-Gu Kim. "Galvanic Corrosion of Tinned Copper Coupled with Aluminium Alloy in Electric Vehicle." In CONFERENCE 2023. AMPP, 2023. https://doi.org/10.5006/c2023-19239.

Full text
Abstract:
Abstract In this study, the galvanic corrosion behavior of the tinned Cu terminal coupled with Al–Mg–Si alloy was analyzed. When the Al, Sn and Cu were exposed to the electrolyte, tri–metallic galvanic corrosion occurred between them. The polarization curves show that the corrosion potential increases in the order: Al &amp;lt; Sn &amp;lt; Cu. Therefore, when the tinned Cu is coupled with Al–Mg–Si alloy, Al alloy with the lowest corrosion potential becomes the anode, while Cu with the highest corrosion potential becomes the cathode. Sn, which has an intermediate potential, becomes either anode
APA, Harvard, Vancouver, ISO, and other styles
3

Schnatterer, Christian, Daniela Zander, and Enjuscha Fischer. "Effect of Long-Term Heat Treatments on the Corrosion of High-Strength Al-Mg-Si-Cu Alloys." In CORROSION 2016. NACE International, 2016. https://doi.org/10.5006/c2016-07505.

Full text
Abstract:
Abstract The influence of long-term heat treatments on the corrosion properties and the mechanical properties of the high-strength EN AW 6056 aluminum alloy was investigated. The alloy was tested in the solution annealed (T4) and the artificially aged (T6) condition. Additionally, both conditions were investigated after the exposure in laboratory air at 150°C for up to 38 days. The T4 treated material predominantly showed pitting corrosion in the initial state, but intergranular corrosion (IGC) was introduced during long-term aging. Furthermore, the hardness increased during the first 21 days,
APA, Harvard, Vancouver, ISO, and other styles
4

Pelayo, Lisbeth, Chase C. Hargrove, David S. Calderon, Harrison B. Porter, and Vilupanur Ravi. "Abrasion of Novel Aluminum Metal Matrix Composites." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16936.

Full text
Abstract:
Abstract Ceramic-reinforced aluminum alloys offer distinct advantages over the base alloy. In this project, aluminum-based composites containing silicon carbide particle reinforcements were fabricated using an infiltration technique. Silicon carbide particles were incorporated into molten Al-10% Mg-5% Si (wt%). The resulting materials were characterized using optical and scanning electron microscopy to understand their microstructure. Phase analysis was conducted using X-ray diffraction. Vickers microhardness measurements were also obtained. The abrasion behavior of these composites was studie
APA, Harvard, Vancouver, ISO, and other styles
5

Lee, J. S., R. I. Ray, B. J. Little, and W. C. Neil. "Corrosion Susceptibility of AA5083-H116 in Biologically Active Atmospheric Marine Environments." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-3976.

Full text
Abstract:
Abstract Aluminum alloy (AA) 5083-H116 was exposed to laboratory marine atmospheres with and without fungi. AA5083-H116 coupons were half covered with potato dextrose agar (PDA), a fungal growth media; the remaining coupon areas were left bare and fully exposed to the marine atmosphere. Fungal mycelia were inoculated into the PDA and grew over the entire coupon surface during the 90-day exposure. Overlaid with PDA, AA5083-H116 exhibited shallow crystallographic etching and grain boundary attack. Fungi increased the likelihood and severity of pitting corrosion when compared with abiotic control
APA, Harvard, Vancouver, ISO, and other styles
6

Druschitz, Alan P., Myrissa Maxfield, William Monzel, and Katie Tontodonato. "A Novel Approach for the Development of Low-Voltage, Aluminum, Sacrificial Anodes." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05702.

Full text
Abstract:
Abstract Our research has two directions: 1) experimental determination of the relationships between chemistry, microstructure and corrosion behavior and 2) computational design of new alloys based on the experimentally established relationships. A variety of aluminum based sacrificial anode chemistries (binary, ternary and quaternary alloys) were prepared using high purity materials at the Kroehling Advanced Materials Foundry at Virginia Tech and their electrochemical performance characterized using laboratory tests. As a result of this study, numerous, new anode chemistries that meet the cur
APA, Harvard, Vancouver, ISO, and other styles
7

Garfias-Mesias, L. F. "The Effect of Microstructure on the Pitting Resistance of Duplex Stainless Steels." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-06000.

Full text
Abstract:
Abstract The effect of the microstructure (ferrite/austenite ratio, grain size and inclusions) on the Pitting Resistance of a UNS S32550 Duplex Stainless Steels (DSS) was studied in chloride containing solutions. Increasing the ferrite content in the matrix of the UNS S32550 (by annealing the alloy at a higher temperature) resulted in a lower Critical Pitting Temperature (CPT) of the alloy. Re-annealing the material to increase the grain size of the austenite resulted in an increased CPT. Microscopy on the inclusions before electrochemical measurements showed that the precursor sites for pitti
APA, Harvard, Vancouver, ISO, and other styles
8

Ramirez, Erick, and L. F. Garfias-Mesias. "In-situ Studies of Precursor Sites for Pit Initiation on Corrosion Resistant Alloys in Chloride Containing Solutions." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02428.

Full text
Abstract:
Abstract The present work has as an objective to show a new technique to study in-situ the determination of precursor sites for pitting corrosion on a 25 Cr Duplex Stainless Steels (DSS) using a conventional optical microscope coupled to a potentiostat and additional hardware that allows the real time imaging on the surface of the steels above room temperature inside an electrochemical cell. The results shows that the precursor sites for pitting on 25 Cr DSS are very complex in nature. The larger inclusions within several areas analyzed and tested did not undergo pitting corrosion, in some cas
APA, Harvard, Vancouver, ISO, and other styles
9

Vysotskiy, I., and et al. "TENSILE BEHAVIOR OF FRICTION-STIR WELDED Al-Mg-Si ALLOY." In International Workshop "Multiscale Biomechanics and Tribology of Inorganic and Organic Systems" ; Mezhdunarodnaja konferencija "Perspektivnye materialy s ierarhicheskoj strukturoj dlja novyh tehnologij i nadezhnyh konstrukcij" ; VIII Vserossijskaja nauchno-prakticheskaja konferencija s mezhdunarodnym uchastiem, posvjashhennaja 50-letiju osnovanija Instituta himii nefti "Dobycha, podgotovka, transport nefti i gaza". Tomsk State University, 2019. http://dx.doi.org/10.17223/9785946218412/390.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vysotskiy, I., S. Malopheyev, S. Mironov, and R. Kaibyshev. "Tensile behavior of friction stir welded Al-Mg-Si alloy." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5132258.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Al-Mg-Si alloy' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography