Relevant bibliographies by topics / Aluminium-Nickel-Zinc Alloys

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Aluminium-Nickel-Zinc Alloys'

Author: Grafiati
Published: 4 June 2021
Last updated: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aluminium-Nickel-Zinc Alloys.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aluminium-Nickel-Zinc Alloys"

1

Karaś, M., M. Nowak, M. Opyrchał, M. Bigaj, and A. Najder. "Influence of the Zinc Sublayer Method Production and Heat Treatment on the Microhardness of the Composite Ni-Al2O3 Coating Deposited on the 5754 Aluminium Alloy." Archives of Metallurgy and Materials 59, no. 1 (2014): 355–58. http://dx.doi.org/10.2478/amm-2014-0059.

Full text
Abstract:
Abstract In this study, the effect of zinc interlayer on the adhesion of nickel coatings reinforced with micrometric Al2O3 particles was examined. Nickel coating was applied by electroplating on EN AW - 5754 aluminium alloy using Watts bath at a concentration of 150 g/l of nickel sulphate with the addition of 50 g/l of Al2O3. The influence of zinc intermediate coating deposited in single, double and triple layers on the adhesion of nickel coating to aluminium substrate was also studied. The adhesion was measured by the thermal shock technique in accordance with PN-EN ISO 2819. The microhardnes
APA, Harvard, Vancouver, ISO, and other styles
2

Mounika, G. "Closed Loop Reactive Power Compensation on a Single-Phase Transmission Line." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 2156–59. http://dx.doi.org/10.22214/ijraset.2021.35489.

Full text
Abstract:
Zinc-aluminium alloys are alloys whose main ingredients stay zinc and aluminium. Other alloying elements clasp magnesium and copper .Zinc Aluminum Alloys over the past decayed are occupying attention of both researches and industries as a promising material for tribological applications. At this moment commercially available Zinc-Aluminium alloys and bearing bronzes due to good cost ability and unique combination of properties. They can also be deliberated as competing material for cast iron, plastics and even for steels. It has been shown that the addition of alloying elements including coppe
APA, Harvard, Vancouver, ISO, and other styles
3

Harris, Janette M., Xiao Rong Zhou, George E. Thompson, et al. "Novel Environmentally-Friendly Coatings for Aerospace Alloys." Materials Science Forum 765 (July 2013): 693–97. http://dx.doi.org/10.4028/www.scientific.net/msf.765.693.

Full text
Abstract:
In the present study, coatings of aluminium, zinc and combinations of aluminium-zinc and zinc-nickel were applied to steel substrates using the cold gas spray process. The effects of powder morphology and impact velocity, as determined by gas temperature and pressure, on the uniformity of the coatings were investigated. The through coating microstructure and composition were examined using scanning electron microscopy to determine the elemental distribution and the nature and extent of porosity. Work continues with an investigation of substrate condition and spray parameters on deformation and
APA, Harvard, Vancouver, ISO, and other styles
4

Aamir, Muhammad, Riaz Muhammad, Majid Tolouei-Rad, Khaled Giasin, and Vadim V. Silberschmidt. "A review: microstructure and properties of tin-silver-copper lead-free solder series for the applications of electronics." Soldering & Surface Mount Technology 32, no. 2 (2019): 115–26. http://dx.doi.org/10.1108/ssmt-11-2018-0046.

Full text
Abstract:
Purpose The research on lead-free solder alloys has increased in past decades due to awareness of the environmental impact of lead contents in soldering alloys. This has led to the introduction and development of different grades of lead-free solder alloys in the global market. Tin-silver-copper is a lead-free alloy which has been acknowledged by different consortia as a good alternative to conventional tin-lead alloy. The purpose of this paper is to provide comprehensive knowledge about the tin-silver-copper series. Design/methodology/approach The approach of this study reviews the microstruc
APA, Harvard, Vancouver, ISO, and other styles
5

Ervina Efzan, Mohd Noor, H. J. Kong, and C. K. Kok. "Review: Effect of Alloying Element on Al-Si Alloys." Advanced Materials Research 845 (December 2013): 355–59. http://dx.doi.org/10.4028/www.scientific.net/amr.845.355.

Full text
Abstract:
Al-Si alloys are the most common aluminium cast products owing to their high resistance to hot cracking and excellence fluidity during the molten state. They play important roles in aerospace, automobile and structural industries where high strength to weigh ratio, superior heat conductivity and good corrosion resistance applications are necessary. Alloying elements such as copper, magnesium, zinc and nickel are added into the Al-Si alloys for further strength enhancement. However, impurities such as iron are often present in Al-Si alloys, forming brittle intermetallic phases and hence reducin
APA, Harvard, Vancouver, ISO, and other styles
6

Jiao, Yang, Shenghan Zhang, and Yu Tan. "Thermodynamic Analysis and Crystallographic Properties of MFe2O4, MCr2O4 and MAl2O4 (M = Fe, Ni, Zn) Formed on Structural Materials in Pressurized Water Reactor Primary Circuit under Zinc and Zinc-aluminum Water Chemistry." Entropy 24, no. 2 (2022): 245. http://dx.doi.org/10.3390/e24020245.

Full text
Abstract:
Zinc injection technology (zinc water chemistry, ZWC) was widely applied in pressurized water reactor (PWR) primary circuits to reduce radiation buildup and improve corrosion resistance of structural materials. The simultaneous injection of zinc-aluminium (ZAWC) is a novel implement created to replace part of Zn2+ by Al3+. It was reported ZAWC can improve further corrosion resistance of carbon steels and stainless steels. However, ZAWC sometimes showed even negative effects on Nickel-alloys. In this study, mechanism of formation of oxide film on metals was investigated. The reactions of Fe2+ N
APA, Harvard, Vancouver, ISO, and other styles
7

Oguntuase, Musa, Gbenga Joshua Adeyemi, and Joseph Temitope Stephen. "Effects of Cow Horn Particulates as Addictive on Microstructure, Tensile and Compressive Properties of Recycled Aluminium Alloy." European Journal of Engineering and Technology Research 7, no. 2 (2022): 146–52. http://dx.doi.org/10.24018/ejeng.2022.7.2.2803.

Full text
Abstract:
In the recent time, the development of low cost metal alloys reinforced with waste materials such as agricultural waste and industrial waste has been one of the major innovations in the area of material science. Aluminium scraps were used as raw material and reinforced with locally available inexpensive cow horn particulate (CHp) of 3, 6, 9 and 12% by weight to develop a new material in the present study. The microstructure view was studied using optical microscope for analysing the distribution of CHp. The tensile and compressive strengths were studied for the reinforced CHp aluminium alloy.
APA, Harvard, Vancouver, ISO, and other styles
8

Mysik, R. K., A. V. Sulitsin, and S. V. Brusnitsyn. "Influence of Intermetallics on Complex Alloyed Brass Hardness." Solid State Phenomena 265 (September 2017): 789–92. http://dx.doi.org/10.4028/www.scientific.net/ssp.265.789.

Full text
Abstract:
The results of the study of phase composition, structure, and properties of multi-component complex alloyed wear-resistant brass are presented. The material contains aluminium, manganese, silicon, nickel, and chromium besides copper and zinc. A review of the influence of these components on the formation of intermetallics with different chemical composition and morphology is made. Based on the analysis it is revealed that the wear resistance of brass is highly dependent on the ratio of α-and β-phases and the volume fraction of the intermetallic particles. Chemical X-ray fluorescence, scanning
APA, Harvard, Vancouver, ISO, and other styles
9

Binoj, K. K. "Electrochemical Activation of Nickel Oxide Incorporated Aluminum-Zinc Alloy Matrix as an Efficient Sacrificial Anode in Marine Environments." Asian Journal of Chemistry 34, no. 4 (2022): 841–48. http://dx.doi.org/10.14233/ajchem.2022.23593.

Full text
Abstract:
For cathodic protection of steel, the aluminium-zinc alloy sacrificial anodes incorporated with nickel oxide nanoparticles were fabricated. The metallurgical properties of Al-Zn sacrificial anodes enhanced substantially through the infiltration and uniform dispersion of nickel oxide nanoparticles into an Al-Zn matrix. Such effective and uniform presence of nano nickel oxide inside the interior mass of the anodes was characterized by electrochemical techniques. The anodes showed considerably low polarization, steady and high active open circuit potential and substantially decreased self-corrosi
APA, Harvard, Vancouver, ISO, and other styles
10

Zhou, Liyan, and Wei Sun. "Influence of different alloy elements on the color of copper alloy." Journal of Physics: Conference Series 2541, no. 1 (2023): 012051. http://dx.doi.org/10.1088/1742-6596/2541/1/012051.

Full text
Abstract:
Abstract In this paper, Zinc, Aluminium, Nickel, Tin, and Iron are chosen as alloy elements to investigate the influence of different alloy elements on the color of copper alloy. The elements in each experimental group were designed by the orthogonal experiment method. The alloy was prepared by the non-vacuum smelting method. The color of the alloy was determined by spectrophotometer and CIE1976L *a*b* color system. The influence of several common alloy elements on the color of the copper alloy was studied. The results show that the content of Zn had a significant effect on the red-green value
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Aluminium-Nickel-Zinc Alloys"

1

Srinivasan, Dheepa. "Growth Morphology And Coarsening Of Metastable Al3Zr In Melt Spun Al-Ni-Zr Alloys." Thesis, 1996. https://etd.iisc.ac.in/handle/2005/1950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Srinivasan, Dheepa. "Growth Morphology And Coarsening Of Metastable Al3Zr In Melt Spun Al-Ni-Zr Alloys." Thesis, 1996. http://etd.iisc.ernet.in/handle/2005/1950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography