Relevant bibliographies by topics / Aluminium powder

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Aluminium powder'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aluminium powder.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aluminium powder"

1

Liu, He Ping, Feng Er Sun, Shao Lei Cheng, Lang Lang Liu, and Yi Bo Gao. "Microstructure Analysis and Preparation of Graphene Reinforced Aluminum Matrix Composites." Key Engineering Materials 814 (July 2019): 102–6. http://dx.doi.org/10.4028/www.scientific.net/kem.814.102.

Full text
Abstract:
Although many problems in aluminium matrix composites have been solved, there are still many difficulties and challenges that need to be solved. In this work, graphene reinforced aluminum matrix composites are prepared by hot isostatic pressing and vacuum sintering. The microstructures of composite powders and composites were studied by means of scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The effects of different ball milling parameters on the microstructures of composite powders were analyzed. The particle size of graphene coated aluminium composite powder increases with the increase of ball-to-material ratio. With the increase of milling time, graphene was gradually dispersed and coated on the aluminium powder particles, and the aluminium powder particles could be completely coated. with the increase of the speed, the large particles are extruded, sheared and the particles become smaller. The internal micro-deformation characteristics of graphene reinforced aluminium matrix composites were analyzed in detail.
APA, Harvard, Vancouver, ISO, and other styles
2

Champion, Y. "Powder metallurgy of nanometric aluminium powders." Powder Metallurgy 51, no. 2 (June 2008): 125–32. http://dx.doi.org/10.1179/174329008x284912.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cook, R., I. T. H. Chang, and C. Lucien Falticeanu. "Aluminium and Aluminium Alloy Powders for P/M Applications." Materials Science Forum 534-536 (January 2007): 773–76. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.773.

Full text
Abstract:
P/M aluminium components are attracting interest in an increasing variety of industries due to the possibilities for weight saving in engineering parts. There are many processes for manufacturing from powder feedstocks that are either in production, becoming commercialised or still undergoing development. The nature of these processes and the required properties of the end products mean that powders of different particle size, shape, composition and microstructure must be produced. The requirements of various processes requiring aluminium and aluminium alloy powders for metal matrix composites, laser sintering, powder forging and metal injection moulding are discussed in relation to powder particle size and structure. The key requirement of the powder manufacturer is to supply cost effective materials for these different processes. This may require compromises to be made by the supplier and consumer while the techniques evolve from development to large scale production.
APA, Harvard, Vancouver, ISO, and other styles
4

Shen, Yang, Yu Zhong Ruan, Yan Yu, and Yun Hong Zheng. "Synthesis of Aluminium Titanate Ceramics from Waste Sludge of Aluminium Factory." Key Engineering Materials 368-372 (February 2008): 1538–40. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.1538.

Full text
Abstract:
Aluminium titanate was synthesized using waste aluminium sludge and chemical pure TiO2 powder as raw materials. Effect of different compositions on crystal structure and contents of target product was discussed. XRD results showed that four crystal phases, aluminium titanate, perovskite, rutile and aluminum oxide, are formed in the sintered samples. The content of aluminium titanate increases first and then decreases with the decrease of the content of waste aluminum sludge. When the content of the sludge is 65.52wt%, the content of aluminium titanate reaches the maximum of 86.1wt%.
APA, Harvard, Vancouver, ISO, and other styles
5

Oliveira, J. L. A., and J. B. Fogagnolo. "Effects of Al2O3 Particles Addition on Compressibility and Sinterability of Aluminium Powder Allows." Materials Science Forum 591-593 (August 2008): 907–12. http://dx.doi.org/10.4028/www.scientific.net/msf.591-593.907.

Full text
Abstract:
There is considerable industrial potential for aluminium alloys and aluminium metal matrix composites fabricated via net shape press-and-sintering powder metallurgy using low-cost, elemental premixed powder. In this work, the compressibility and sinterability of premixed Al– 4.5Cu–0.7Si–0.5Mg powder alloy reinforced with Al2O3 particles was analyzed. The powders reinforced with increasing ceramic particle content were cold-pressed under increasing pressure and sintered at 600 oC for 40 minutes, in nitrogen atmosphere. The powders showed the typical compressibility curves and the presence of hard ceramic particles decreased the powder deformation capacity and, consequently, the powder compressibility. The sintering produced swelling of the parts, due to the poor wettability of liquid phase on the aluminium particles and to the Kirkendall effect caused by the difference in diffusivity of aluminium in copper and copper in aluminium. The presence of Al2O3 particles increased the swelling during sintering probably due to the sooner formation of liquid phase.
APA, Harvard, Vancouver, ISO, and other styles
6

Labisz, Krzysztof, and Tomasz Tański. "Laser Surface Treatment of Cast Aluminium-Silicon Alloys." Solid State Phenomena 275 (June 2018): 30–40. http://dx.doi.org/10.4028/www.scientific.net/ssp.275.30.

Full text
Abstract:
The reason of performing the investigations carried out in this work was to investigate the microstructure of the laser treated Al-Si-Cu cast aluminium alloy with the ceramic powder particles using High Power Diode Laser (HPDL) for remelting, and/or alloying. First of all the feeding and distribution of the powder in the surface layer of the alloyed and remelted AlSi7Cu material. Very important issue is the determination of the laser treatment parameters, especially the powder feeding rate, laser power, and scan rate to achieve an enhancement of the layer hardness for ensuring this cast aluminium alloy from losing their working properties and to achieve the tool surface is more resistant to wear. The purpose of this work was also to determine technological and technical conditions comparison for the Al2O3 and SiC ceramic powder alloyed into the surface layer with High Power Diode Laser. There are presented also the investigation results about the determination of proper technical condition during the laser treatment, especially the laser head distance and shielding gas influence. The presented results concerns first of all the structure investigation of the obtained surface layer allowing it to achieve an enhanced hardness and wear resistance more resistant for work, special attention was devoted to monitoring of the layer morphology of the investigated material and on the particle occurred. Light (LM) and scanning electron microscopy (SEM) were used to characterize the microstructure of the obtained surface zones - the remelted zone (RZ) and heat affected zone (HAZ), the ceramic powder distribution and intermetallic phases occurred. A wide range of laser power values was applied and implicated with different laser scan rates. The powders in form of ceramic powders used for alloying were chosen with the particle size of ca. 60μm. This study was conducted to investigate the influence carbide and oxide powder addition on structure and mechanical properties as well the and structure changes occurred during the rapid solidification process. The investigation ensures to use laser treatment for alloying/feeding of ceramic powder particles into the surface of light alloys. The scientific reason of this work is the applying of High Power Diode Laser (HPDL) for improvement of aluminium`s mechanical properties, especially the surface hardness. As the main findings was determined that the obtained surface layer is homogeny without cracks and has a comparably higher hardness value compared to non-treated material. The surface hardness increases together with the applied laser power, the highest power applied gives the highest hardness value for the surface. Also the distribution of the ceramic particles is proper, but there a need for further modelling, because the hardness increases in general according to the laser power used so that the highest power applied gives to highest hardness value in the remelted layer, but for other powder amount or alloy the values should be determined separately, and more data would be necessary to create a model for the technique appliance. The practical purpose of this work is to analysis the impact and application possibility of HPDL laser surface treatment on the cast Al-Si-Cu alloys to deliver application possibilities for diverse branches of industry.
APA, Harvard, Vancouver, ISO, and other styles
7

BEHERA, RAJESH KUMAR, SARAT CHANDRA PANIGRAHI, BIRAJENDU PRASAD SAMAL, and PRAMOD KUMAR PARIDA. "MECHANICAL PROPERTIES AND MICRO-STRUCTURAL STUDY OF SINTERED ALUMINIUM METAL MATRIX COMPOSITES BY P/M TECHNIQUE." Journal of Modern Manufacturing Systems and Technology 3 (October 1, 2019): 89–97. http://dx.doi.org/10.15282/jmmst.v2i2.2402.

Full text
Abstract:
Material world requires a strong research to produce a new class of materials having light weight, higher strength and better performances. This has been leads to investigate for high strength light weight alloy. The main objective in developing aluminium metal matrix composites is to provide enhanced characteristic performances and properties above the currently available materials. Based upon the literature a new type of aluminium composite has been tries to develop which will offer attractive mechanical properties such as high strength, easy machinability, appreciable density, and low manufacturing cost etc. Aluminum powders of 99.55% purity and 325 mesh sizes are mixed with alloying metals like Copper, Magnesium, Silicon and Silicon Carbide powders in a precisely controlled quantity. During the process of powder metallurgy (P/M) product preparation, it was minutely observed to attain the maximum efficiency and accuracy. Aluminium (Al) is a light weight material but doesn’t possess a good strength. To achieve this, Copper (Cu), Silicon (Si), Magnesium (Mg) & Silicon Carbide (SiC) powders were blended with it at required proportions. The compaction was carried out with help of a C-45 steel die by power compaction press with a load of 150KN to 250KN. The obtained green products were sintered in a Muffle furnace to produce the final Aluminium Metal Matrix Composites (AMMCs) product.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Li Fang, Cui Zhi Dong, Hui Fang Zhang, Xiao Yan Wang, and Shu Long Ma. "Preparation of Zirconia-Aluminum Titanate Nano-Composite Powder." Advanced Materials Research 287-290 (July 2011): 281–84. http://dx.doi.org/10.4028/www.scientific.net/amr.287-290.281.

Full text
Abstract:
With zirconium oxychloride, aluminium sulphate and titanium oxysulphate as the basic raw materials, zirconia-aluminum titanate nano-composite powders were prepared with the liquid precipitation method. The nanocomposite powders were detected with XRD, TEM and TG-DTA.The results show that recovery ratio of zirconia and aluminum titanate precursosr is higher, with respective pH about 9.5, 5.5 and concentration of 0.1 mol dm-3 in the system. About several nanometer zirconia and 100 nanometer size aluminum titanate can be obtained when the precursors are respectively roasted at 600°C and 1000°C.
APA, Harvard, Vancouver, ISO, and other styles
9

Bućko, Mirosław M., Jakub Domagała, and Radosław Lach. "Consolidation of Aluminium Oxynitride Powders Using Hydrolysis of Aluminium Nitride." Key Engineering Materials 602-603 (March 2014): 170–74. http://dx.doi.org/10.4028/www.scientific.net/kem.602-603.170.

Full text
Abstract:
One of the materials with high potential for application as a refractory material is aluminum oxynitride with spinel-type structure, γ-alon. Alon materials, single-phase or composites, are characterized by good mechanical properties, high thermal shock resistance and a high corrosion and erosion resistance. Another advantage is possibility of usage of SHS method for producing of relatively good sinterable powders of γ-alon, however, are characterized by poor compressibility. This paper describes a method of compaction of SHS-derived γ-alon powder using the hydrolysis reaction of aluminum nitride, which is one of the products of SHS synthesis. The green bodies made from the powder with addition of 10 mas.% of water after two weeks of storage reach a strength level up to 30 MPa and an open porosity of less than 30%. Pressureless sintering of the such compacts allows to achieve 95% of theoretical density at 1700°C in less than one minute.
APA, Harvard, Vancouver, ISO, and other styles
10

Hartaya, Kendra. "ANALISIS KANDUNGAN ALUMINIUM POWDER PROPELAN BERDASAR ENERGI PEMBAKARAN DARI BOMB KALORIMETER (ANALYSIS OF PROPELLANT’S ALUMINUM POWDER CONTENT BASED ON BURNING ENERGY FROM BOMB CALORIMETER)." Jurnal Teknologi Dirgantara 14, no. 1 (March 19, 2018): 73. http://dx.doi.org/10.30536/j.jtd.2016.v14.a2949.

Full text
Abstract:
It has been analyzed the result of propellant research with variable aluminum content to the combustion energy output . Measurement of the amount of combustion energy carried by the bomb calorimeter. Propellant sample was made by mixing HTPB and aluminium for 15 minutes, adding fine AP for mixing 20 minutes, adding coarse AP for mixing 50 minutes. After stirring ends, the TDI was added and stirred for 15 minutes . Aluminum content in the propellant varies from 8 % to 18 %w . The resulted combustion energy is 2885 cal/g to 3750 cal/g . In 18 % of Al content, burning energy begin to reduce . This reduction was largely caused by burning sample together with the erosiving sample ABSTRAKTelah dilakukan analisis hasil penelitian propelan dengan variabel kandungan aluminium terhadap hasil energi pembakaran. Pengukuran besarnya energi pembakaran propelan dilakukan dengan bomb calorimeter. Sampel propelan dibuat dengan mencampur HTPB dan aluminium selama 15 emnit dilanjutkan pencampuran dengan AP halus selama 20 menit, lalu dengan AP kasar selama 50 mrnit. Setelah pengadukan berakhir maka ditambahkan TDI dan diaduk selama 15 menit. Kandungan Al di variasi dari 8% hingga 18%. Energi pembakaran yang dihasilkan adalah 2885 kal/gr hingga 3750 kal/gr. Pada 18% Al energi pembakaran mulai menurun. Penurunan ini diakibatkan oleh sebagian besar sampel yang terbakar sama dengan sampel yang mengalami erosiv.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Aluminium powder"

1

Sliwinski, Peter R. "Powder painting of aluminium." Thesis, Aston University, 1985. http://publications.aston.ac.uk/14478/.

Full text
Abstract:
The mechanisms involved in the production of chromate-phosphate conversion coatings on aluminium have been investigated. A sequence of coating nucleation and growth has been outlined and the principle roles of the constituent ingredients of the chromate-phosphate solution have been shown. The effect of dissolved aluminium has been studied and its role in producing sound conversion coatings has been shown. Metallic contamination has been found to have a dramatic influence on chromate-phosphate coatings when particular levels have been exceeded. Coating formation was seen to be affected in proportion to the level of contaminaton; no evidence of sudden failure was noted. The influence of substrate and the effect of an acidic cleaner prior to conversion coating have been studied and explained. It was found that the cleaner ages rapidly and that this must .be allowed for when attempting to reproduce industrial conditions in the laboratory. A study was carried out on the flowing characteristics of polyester powders of various size distributions as they melt using the hot-stage microscopy techniques developed at Aston. It was found that the condition of the substrate (ie extent of pretreatment), had a significant effect on particle flow. This was explained by considering the topography of the substrate surface. A number of 'low-bake' polyester powders were developed and tested for mechanical, physical and chemical resistance. The best formulation had overall properties which were as good as the standard polyester in many respects. However chemical resistance was found to be slightly lower. The charging characteristics of powder paints during application by means of electrostatic spraying was studied by measuring the charge per unit mass and relating this to the surface area. A high degree of correlation was found between charge carried and surface area, and the charge retained was related to the powder's formulation.
APA, Harvard, Vancouver, ISO, and other styles
2

Thomas, H. A. J. "Preparartion and characterisation of reaction sintered aluminium titanate." Thesis, University of Leeds, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.382874.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

ALMEIDA, FILHO AMERICO de. "Elaboração e estudos de recristalização de ligas alumínio-magnésio-tório e alumínio-magnésio-nióbio." reponame:Repositório Institucional do IPEN, 2005. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11345.

Full text
Abstract:
Made available in DSpace on 2014-10-09T12:50:54Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T13:58:07Z (GMT). No. of bitstreams: 1 11108.pdf: 32426138 bytes, checksum: e0fd60a0b29703462d6537e5ea445860 (MD5)
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
APA, Harvard, Vancouver, ISO, and other styles
4

Howe, D. P. "The production of aluminium based bearing materials by powder compaction." Thesis, Queen's University Belfast, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.317093.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fujii, Tomohiro. "Direct powder semi-solid moulding of particulate SiC reinforced aluminium alloy." Thesis, Imperial College London, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.416951.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pinwill, Ian E. "A study of binder removal from powder injection moulded aluminium bodies." Thesis, Brunel University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278405.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

ROCHA, CLAUDIO J. da. "Mecanismos de ativação mecânica de misturas de nióbio e alumínio para a síntese por reação do NbAlsub(3)." reponame:Repositório Institucional do IPEN, 2008. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11675.

Full text
Abstract:
Made available in DSpace on 2014-10-09T12:54:37Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:07:21Z (GMT). No. of bitstreams: 0
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN-SP
APA, Harvard, Vancouver, ISO, and other styles
8

Blümke, Tobias. "New preparation of organoaluminiums – catalysed metal insertion of aluminium powder and synthetic applications of organoalanes - preparation of 1,2-bimetallics by direct insertion of aluminium or zinc powder." Diss., lmu, 2012. http://nbn-resolving.de/urn:nbn:de:bvb:19-146207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ahmad, Faizan. "Experimental Studies in Hydrogen Generation for Fuel Cell Applications using Aluminum Powder." University of Dayton / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1294435782.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mobberley, Thomas Guy. "Novel processing routes for consolidation of powder metallurgy based aluminium matrix composites." Thesis, Imperial College London, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.500132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Aluminium powder"

1

Sliwinski, Peter Richard. Powder painting of aluminium. Birmingham: University of Aston. Department of Metallurgy and Materials, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Birt, Michael J. The fatigue response of high-strength powder route aluminium alloys. Birmingham: University of Birmingham, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pinwill, Ian E. A study of binder removal from powder injection moulded aluminium bodies. Uxbridge: Brunel University, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jokinen, Antero. Fabrication and properties of powder metallugical and cast aluminium alloy matrix composite products. Espoo, Finland: Technical Research Centre of Finland, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kondapalli, Satyanarayana. Surface modification of aluminium components by developing composite coatings using plasma powder arc welding process. Aachen: Shaker, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fine, ME, and EA Starke, eds. Rapidly Solidified Powder Aluminum Alloys. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1986. http://dx.doi.org/10.1520/stp890-eb.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Utiger, R. E. Never trust an expert: Nuclear power, government and the tragedy of the Invergordon aluminum smelter. London: Business History Unit. London School of Economics, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Powder Metallurgy Aluminum & Light Alloys for Automotive Applications Conference (2nd 2000 Troy, Mich.). Powder Metallurgy Aluminum & Light Alloys for Automotive Applications Conference: Proceedings of the Second International Conference on Powder Metallurgy Aluminum & Light Alloys for Automotive Applications. Princeton, N.J: Metal Powder Industries Federation, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

J, Hildeman Gregory, Koczak Michael J, Metallurgical Society of AIME, and Metallurgical Society of AIME. Fall Meeting, eds. High strength powder metallurgy aluminum alloys II: Proceedings of a TMS-AIME Symposium on "Aluminum Powder Metallurgy" held at the TMS-AIME Fall Meeting, Toronto, Canada, October 13-17 1985. Warrendale, PA: Metallurgical Society, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Connolly, J. C. High-power single spatial mode AlGaAs channeled-substrate-planar semiconductor diode lasers for spaceborne communications. Hampton, Va: Langley Research Center, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Aluminium powder"

1

Cook, R., I. T. H. Chang, and C. Lucien Falticeanu. "Aluminium and Aluminium Alloy Powders for P/M Applications." In Progress in Powder Metallurgy, 773–76. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.773.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Radic, Vlado N. "Explosive Consolidation of Aluminium Nitride Powder." In Advanced Science and Technology of Sintering, 489–95. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4419-8666-5_69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tadic, S., and S. Zec. "Recrystallization of Cold-Pressed Aluminium Powder." In Advanced Science and Technology of Sintering, 551–56. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4419-8666-5_77.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ruiz-Navas, E. M., M. L. Delgado, S. Benito Gonázles, and Elena Gordo. "Study of TiCn Additions to an 2xxx Series Aluminium Alloy." In Progress in Powder Metallurgy, 841–44. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.841.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zubizarreta, C., I. Arribas, S. Giménez, and I. Iturriza. "Softening-Hardening Mechanism in the Direct Hot-Extrusion of Aluminium Compacts." In Progress in Powder Metallurgy, 837–40. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.837.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Shalin, R. E., A. N. Gribkov, and S. E. Salibekov. "SiC Whisker and Powder Reinforced Aluminium Matrix Composites." In MICC 90, 815–17. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3676-1_150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wilden, J., and Jean-Pierre Bergmann. "Mechanised Plasma-Powder-Arc-Welding (PPAW) of Aluminium Sheets." In Sheet Metal 2005, 225–34. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-972-5.225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Urtiga Filho, Severino L., James C. Earthman, I. Nieves, Maria Helena Robert, and T. P. Waked. "Production and Characterization of Aluminium NbAl3 Composite by Mechanical Alloying and In Situ - A Process Comparison." In Advanced Powder Technology IV, 158–63. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-984-9.158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Siljan, Ole-J., Ole J. Junge, Trygve B. Svendsen, and Kjell Thovsen. "Experiences with Dry Barrier Powder Materials in Aluminium Electrolysis Cells." In Essential Readings in Light Metals, 840–48. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118647745.ch111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Siljan, Ole-J., Ole J. Junge, Trygve B. Svendsen, and Kjell Thovsen. "Experiences with Dry Barrier Powder Materials in Aluminium Electrolysis Cells." In Essential Readings in Light Metals, 840–48. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48200-2_111.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Aluminium powder"

1

Esawi, Amal M. K., and Mostafa A. El Borady. "Powder Rolling of Carbon Nanotube-Reinforced Aluminium." In ASME 2006 Multifunctional Nanocomposites International Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/mn2006-17024.

Full text
Abstract:
Powder Rolling is a traditional technique for the fabrication of metal strips in which metal powder is continuously fed into a rolling mill and compacted into strip. Recently, carbon nanotubes (CNTs) have emerged as promising new materials with exceptional properties. This has stimulated interest in their use to reinforce polymer, and ceramic matrices. In spite of their potential technological importance, a few research groups have investigated their use to reinforce metal matrices. In this paper, the powder rolling technique is used for the first time to fabricate aluminium strips reinforced with carbon nanotubes. Mixtures of aluminium powder and various wt% catalytic multi-wall carbon nanotubes (MWCNT) were roll compacted and sintered to form thin strips. CNTs were observed to be aligned in the in-plane direction. Tension tests were conducted on the strips to investigate the effect of the carbon nanotubes on the mechanical properties. Although the yield strength for the 0.5 wt% CNT samples increased, the ultimate strength and strain-to-failure for all samples with CNT were mostly lower than the base metal. This was attributed to the observed clustering of the CNTs, especially in higher wt% CNT samples. Provided the CNT clustering problem is overcome, the process promises many advantages; namely, its low cost, the ease of incorporating the carbon nanotubes and the potential important applications for the carbon nanotube-metal strips.
APA, Harvard, Vancouver, ISO, and other styles
2

Guarino, S., and V. Tagliaferri. "Fabrication of Aluminium Foam Components by Using Powder Compact Melting Method." In ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58607.

Full text
Abstract:
Recently, closed cell cellular metals have been gaining a very high interest due to their unique characteristic applications in various technology domains. They combine the advantages of a metal with the structural advantages of foam. Among these, aluminium foams have created a great interest due to their light weight structure and their various applications in the automotive, aerospace and allied industries. Aluminium foam possesses high stiffness and low density, it has good energy-absorbing properties making it good for crash-protection and packaging and it has attractive heat-transfer properties that permit to use these materials to cool electronic equipment and as heat exchangers in engines. However, its manufacturing techniques and characterization methods need more attention. The inadequate knowledge on the physical phenomena governing the foaming process does not allow to obtain products with repeatable characteristics. In this paper aluminium foams in various fabrication components were produced by applying the powder compact melting method. In particular metal powders (AlSi7) and powdered gas-releasing blowing agents (TiH2) were mixed and subsequently pressed to obtain a foamable precursor material. The resulting precursor was then foamed by heating it up to above its melting point. Experimental tests were performed to study the fabrication of aluminum foam components and with the extent of optimize the pressing parameters of the foamable precursor material, the foaming temperature and the heating rate during foaming. It was studied the effects of geometrical discontinuities in the mould (such as holes, restrictions, etc) on the evolution and on the morphology of metal foams.
APA, Harvard, Vancouver, ISO, and other styles
3

"Porosity and Sorptivity of Aerated Concrete with Different Aluminium Powder Content." In 2nd International Conference on Architecture, Structure and Civil Engineering. Universal Researchers, 2016. http://dx.doi.org/10.17758/ur.u0316326.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kar, Simanchal, P. P. Bandyopadhyay, and S. Paul. "Effect of Arc-Current and Particle Morphology on Fracture Toughness of Plasma Sprayed Aluminium Oxide Coating." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2993.

Full text
Abstract:
Alumina powder was sprayed on low carbon steel substrate using atmospheric plasma spray process. Two different powders namely crushed and agglomerated powders were used and current was varied to study their effect on fracture toughness. Theoretically, with increase in arc current, melting of ceramic oxide shall increases and in turn dense coating should form. However, it was observed that if the arc power is too high and particle size of the powder being small (∼ 30 μm), the particles tend to fly away from the plasma core. Similarly, particle size distribution and powder morphology also affects the coating properties. Smaller particle should allow more melting resulting in dense coating and agglomerated powder allows flowability as well as better coating efficiency. Conversely, smaller particles tend to fly away from the plasma making the process difficult while the agglomerated particles showed a bimodal structure marked by presence of unmelted region in the splat core. All these factors lead to substantial variation in the fracture toughness of the coating. The present paper attempts to correlate plasma spraying parameters and microstructure of the coating with fracture toughness of the same.
APA, Harvard, Vancouver, ISO, and other styles
5

Ignat, Sorin, Pierre Sallamand, Dominique Grevey, and Michel Lambertin. "Magnesium alloys laser (Nd:YAG) cladding with side injection of aluminium based powder." In ICALEO® 2004: 23rd International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2004. http://dx.doi.org/10.2351/1.5060245.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Andrada, D. M., T. M. Serodre, A. P. Santos, and C. A. Furtado. "REDUCED GRAPHENE OXIDE AS REINFORCEMENT IN ALUMINIUM NANOCOMPOSITES PREPARED BY POWDER METALLURGY." In Brazilian Conference on Composite Materials. Pontifícia Universidade Católica do Rio de Janeiro, 2018. http://dx.doi.org/10.21452/bccm4.2018.11.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sarathi, R., T. K. Sindhu, S. R. Chakravarthy, and R. Jayaganthan. "Processing and Characterization of Nano Aluminium Powder Using Electric Explosion Process (EEP)." In 2007 IEEE Pulsed Power Plasma Science Conference. IEEE, 2007. http://dx.doi.org/10.1109/ppps.2007.4345633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sarathi, R., T. K. Sindhu, S. R. Chakravarthy, and R. Jayaganthan. "Processing and characterization of Nano Aluminium powder Using Electric Explosion process (EEP)." In 2007 IEEE International Pulsed Power Plasma Science Conference (PPPS 2007). IEEE, 2007. http://dx.doi.org/10.1109/ppps.2007.4651865.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rokkala, Srinivasu, Y. Phaneendra, B. N. Dhanunjaya Rao, and K. Harish Kumar. "Synthesis and Characterization of Aluminium-Tungsten Metal-Metal Composite Through Powder Metallurgy." In Smart Technologies in Data Science and Communication 2017. Science & Engineering Research Support soCiety, 2017. http://dx.doi.org/10.14257/astl.2017.147.61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Comas, B., C. Mateus, B. Hansz, and C. Coddet. "On The Fabrication and Properties of a Ceramic Cladded Aluminium Powder Using the Spray Drying Process." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p1245.

Full text
Abstract:
Abstract A new family of spherical powders produced by the spray drying route has been developed. This paper describes as an example the manufacturing method of an Y203-coated aluminum powder. Atmospheric Plasma Spraying (APS) was used to test the corresponding coatings. Morphology and phases of powders and coatings were investigated by optical and scanning electron microscopy while the level of porosity was evaluated using image analysis. Results show that homogenous composite coatings can be obtained from cladded spray dried powders.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Aluminium powder"

1

Flumerfelt, J. F. Aluminum powder metallurgy processing. Office of Scientific and Technical Information (OSTI), February 1999. http://dx.doi.org/10.2172/348922.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Joshi, V. S., N. N. Thadhani, R. A. Graham, and G. T. Jr Holman. Shock compression of quartz and aluminum powder mixtures. Office of Scientific and Technical Information (OSTI), November 1995. http://dx.doi.org/10.2172/125005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ismail, I. M., and T. W. Hawkins. Physical and Chemical Characterization of Ultrafine Aluminum Powders. Fort Belvoir, VA: Defense Technical Information Center, October 1999. http://dx.doi.org/10.21236/ada408575.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Y. Aluminide Coatings for Power-Generation Applications. Office of Scientific and Technical Information (OSTI), November 2003. http://dx.doi.org/10.2172/885900.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yokota, Shari Hanayo. Oxidation behavior in reaction-bonded aluminum-silicon alloy/alumina powder compacts. Office of Scientific and Technical Information (OSTI), December 1992. http://dx.doi.org/10.2172/10141012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yokota, S. H. Oxidation behavior in reaction-bonded aluminum-silicon alloy/alumina powder compacts. Office of Scientific and Technical Information (OSTI), December 1992. http://dx.doi.org/10.2172/6625941.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chase, G. G., and W. E. Glad. Analysis of OSPREY Processes and Conventional Power Aluminum Alloys. Fort Belvoir, VA: Defense Technical Information Center, April 1992. http://dx.doi.org/10.21236/ada255764.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cooper, Marcia. Shock and Reaction in Granular Bed of HMX-Aluminum Powders. Office of Scientific and Technical Information (OSTI), July 2021. http://dx.doi.org/10.2172/1809919.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Asit Biswas Andrew J. Sherman. Oxide Dispersion Strengthened Iron Aluminide by CVD Coated Powders. Office of Scientific and Technical Information (OSTI), September 2006. http://dx.doi.org/10.2172/891910.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Vigil, M. G. Conical shaped charge pressed powder, metal liner jet characterization and penetration in aluminum. Office of Scientific and Technical Information (OSTI), May 1997. http://dx.doi.org/10.2172/486089.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Aluminium powder' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography