Relevant bibliographies by topics / Aluminum cans Scrap

Contents

  1. Journal articles
  2. Book chapters
  3. Conference papers

Academic literature on the topic 'Aluminum cans Scrap'

Author: Grafiati
Published: 4 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Aluminum cans Scrap.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Aluminum cans Scrap"

1

Coelho, Rodrigo Estevam, Paulo Jesus Costa Esteves, and Jorge Ferreira Brito. "Processing Aluminum Scrap Vial Mechanical Alloying and Subsequently Hot Extrusion." Materials Science Forum 591-593 (August 2008): 212–17. http://dx.doi.org/10.4028/www.scientific.net/msf.591-593.212.

Full text
Abstract:
Recycle aluminum cans, an alternative route is presented in this work. The aluminum cans are cut in little flakes with a shears, and then the materials were milled, obtained fine powders. The weight ratio of the balls to powder was 10 to 1. Equipment of a horizontal high energy ball mill was utilized. The powder mixture was processed during 0.5, 1 and 2 hours at 950 rpm and after milling, the powders were directly hot extrusion. The extruder bars were submitted at a tensile tests and samples microstructures were analyzed by optical microscope. Experimental results obtained shows that the techn
APA, Harvard, Vancouver, ISO, and other styles
2

Ahmad, Farhan, Akhyar, and Ali Masri. "Experiment on Hardness and Impact Strength of Recycled Aluminum Alloys by Metal Casting Process." Materials Science Forum 961 (July 2019): 65–72. http://dx.doi.org/10.4028/www.scientific.net/msf.961.65.

Full text
Abstract:
In this present work, the effects of recycled aluminum scraps on the impact and hardness properties and microstructures with a melting process are studied. The method was conducted to determine an impact toughness by Charphy pendulums; hardness materials by Vickers's test; and chemical composition by spectroscopy. Four types of aluminum scraps have been recycled using a metal casting process. They are beverage cans, aluminum profile bar waste, gasoline engine piston, and scrap pans. The results show that the maximum hardness obtained is 54.13 VHN on the material of the gasoline engine piston.
APA, Harvard, Vancouver, ISO, and other styles
3

Renaldy, Amadeus, Risa Nurin Baiti, I. Putu Gede Sopan Rahtika, and Komang Widhi Widantha. "Mold Design for Injection Molding Machine Using Recycled Aluminum." LOGIC : Jurnal Rancang Bangun dan Teknologi 25, no. 1 (2025): 54–60. https://doi.org/10.31940/logic.v25i1.54-60.

Full text
Abstract:
The use of aluminum is widely spread from beverage cans, car parts, airplanes, trains, and household furniture. This is due to its lightweight and good corrosion resistance. However, as a metal aluminum waste is difficult to be decomposed naturally. Aluminum metal takes 80 to 100 years to decompose. So the accumulation of untreated scrap aluminum can pollute the environment. One of the solutions is to recycle aluminum by melting and re-casting it into a new shape: a mold for polymer processing. The waste of beverage cans was cleaned from any dirt and adhesive. Then, they were turned into small
APA, Harvard, Vancouver, ISO, and other styles
4

Mokaizh, Aiman A. Bin, Motasem Y. D. Alazaiza, Madhusudhan Bangalore Ramu та Dia Eddin Nassani. "Synthesis of Sustainable γ-Alumina Catalyst/Catalyst Support from Aluminum Can Waste: Study of the Influence of Reaction Temperature". Catalysts 15, № 3 (2025): 215. https://doi.org/10.3390/catal15030215.

Full text
Abstract:
The indiscriminate disposal of empty aluminum beverage cans poses a major environmental pollution problem. The last decade has witnessed coordinated research targeted at finding cost-effective and practical solutions to minimize and utilize solid waste, which has become a major global environmental concern. This research is focused on the use of readily available waste aluminum (Al) cans for the synthesis of gamma-alumina. This work aims to synthesize γ-alumina from scrap Al cans using the sol-gel method, as well as their characterization. This study further explores the impact of reaction tem
APA, Harvard, Vancouver, ISO, and other styles
5

Litwińczyk-Kwaśnicka, M., M. Rozpondek, and J. Siwka. "Influence the Thermal Process of the Removing the Varnish Coats to the Cleanness of the Surface Aluminium Scrap." Materials Science Forum 638-642 (January 2010): 876–81. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.876.

Full text
Abstract:
The recycling of aluminium packagings is the complex process in due to of the variety of applied varnishes. The compounds of these varnishes in the raised temperature are decomposed and the reactions products may be: gas and/or carbon and in some cases mineral compounds from pigments and the filling materials. Removing the layer organic from aluminium packagings be holds mainly on the thermal processes. In the paper are described the results of removing the varnish coats from surface of the aluminium cans for drinks. The investigations were carried out in the rotary furnace (Linn High Therm) i
APA, Harvard, Vancouver, ISO, and other styles
6

Ftatsi, Mbetmi Guy-de-patience, Tatsadjieu Yannick Ngandjon, and Chekam François Juvenaul Tamo. "Design and Construction from Local Materials of an Aluminum Recycling Foundry." Engineering and Technology Journal 9, no. 08 (2024): 4907–15. https://doi.org/10.5281/zenodo.13379081.

Full text
Abstract:
In the low-carbon global aluminum cycle actual perspective, the need of remelting aluminum is in constant increase. The objective of this work was to build a portable aluminum foundry based on local materials. This foundry can be used to make small spare parts in complete safety and/or as practical melting equipment. The foundry is made up of a butane combustion Furnace and various tools for     handling molten aluminum. The Furnace was manufactured by recycling a defective gas cylinder. After removing the top of the bottle, we lined the inside with a layer of local clay wh
APA, Harvard, Vancouver, ISO, and other styles
7

Alabi, Okunola A., and Yetunde M. Adeoluwa. "Production Usage, and Potential Public Health Effects of Aluminum Cookware: A Review." Annals of Science and Technology 5, no. 1 (2020): 20–30. http://dx.doi.org/10.2478/ast-2020-0003.

Full text
Abstract:
AbstractThe ingestion of aluminum from food containers such as cookware, cans, utensils and wrappings and its subsequent release into the environment is a growing public health concern. Aluminum is widely used in manufacturing cookware due to its malleability, high heat conductivity, light weight, durability, availability and affordability. This paper therefore gives a review of most relevant literatures on the benefits and risks of the various types of aluminum cookware in use, the composition and the public health effects of aluminum ingestion. Studies that reported the leaching of aluminum
APA, Harvard, Vancouver, ISO, and other styles
8

Mohammed A. Abuqunaydah, Zayad M. Sheggaf, Muheieddin Meftah Elghanudi, and Salem A. Salem. "Recyclability of aluminium piston alloy." مجلة جامعة بني وليد للعلوم الإنسانية والتطبيقية 8, no. 3 (2023): 99–103. http://dx.doi.org/10.58916/jhas.v8i3.122.

Full text
Abstract:
One of the most recycled and recyclable materials now in use is aluminium. Frequently, aluminium cans, automobile components, and window frames are recycled back into itself. A vital component of the contemporary aluminium industry is recycling. Recycled aluminium production uses only around 5% of the energy required to produce new aluminium, resulting in lower carbon emissions and cost savings for both corporations and end users. As a result, today's use of roughly 75% of all aluminum created throughout history. Recycling rates for aluminium exceed 90% in the majority of industrial sectors, i
APA, Harvard, Vancouver, ISO, and other styles
9

Chakthin, Sainatee, Patarawan Kahawong та Payoon Senthongkaew. "The Modification of β-Al5FeSi Phase in Al-Si-Mg-Fe Alloys by Utilizing Recycled Beverage Can Body in Casting Process". Key Engineering Materials 675-676 (січень 2016): 660–63. http://dx.doi.org/10.4028/www.scientific.net/kem.675-676.660.

Full text
Abstract:
The acicular iron intermetallic compound, β-Al5FeSi, is often quoted as disadvantages in aluminum based alloy ingots because of its brittleness. This undeniable phase, however, is found to show less effects on the ingots properties if trace manganese is added. The modified round ended and Chinese script-like structure showed significant higher ductility. The present work reports results of prospective experiments designed for obtaining shape modification of the iron intermetallic compound exclusively from readily available scrap aluminum cans as a source of manganese. A356 aluminum alloy with
APA, Harvard, Vancouver, ISO, and other styles
10

k. Oleiwi, Jawad. "Study the Effect of Iron Powder Additives on Mechanical properties of Recycling of Aluminum Cans Scrap." Engineering and Technology Journal 34, Issue 5 A (2016): 830–38. http://dx.doi.org/10.30684/etj.34.5a.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Aluminum cans Scrap"

1

Maricela Ochoa Palacios, Rocio, Citlaly Castillo Rodriguez, Jesus Torres Torres, Perla Janet Resendiz Hernandez, and Alfredo Flores Valdes. "Application of the Aluminothermic Reduction Process for Magnesium Removal in Aluminum Scrap." In Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.102407.

Full text
Abstract:
Magnesium is considered as impurity element in aluminum recycled for obtaining some cast alloys, with low concentration Mg, because at 0.1 wt% results in fragility, fractures, and defects. This research applies the aluminothermic reduction process to decrease magnesium content in aluminum cans by adding ZnO, to produce reaction products solid-state (Al2O3, MgO and MgAl2O4), and there is a possibility to obtain Al-Zn alloy. The conditions of the process were, melting temperature (750, 800, 850°C) and stirring velocity (200, 250, 300 rpm). The Mg and Zn contents were measured for chemical analys
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Aluminum cans Scrap"

1

Lua, Jim, Jinhui Yan, Joshua Piccoli, Kalyan Shrestha, Anand Karuppiah, and Nam Phan. "Multi-Physics Modeling and Optimization Towards a Digital Twin of Quenching Processes of Large-Scale Metallic Structures." In Vertical Flight Society 80th Annual Forum & Technology Display. The Vertical Flight Society, 2024. http://dx.doi.org/10.4050/f-0080-2024-1399.

Full text
Abstract:
Quenching is a heat treatment process for the rapid cooling of a metallic workpiece in water, oil, or air to obtain certain desired material properties. It is the most critical step in the sequence of heat-treating operations to preserve the solid solution formed at the solution heat-treating temperature by rapidly cooling to near room temperature. Because of the complex interaction between temperature, phase-transformation, and stress/strain relation that depends on the temperature distribution and the microstructure of the workpiece, there is no performance-informed quenching process that ca
APA, Harvard, Vancouver, ISO, and other styles
2

Lua, Jim, Kalyan Shrestha, Anand Karuppiah, Mark Timko, Scot Lund, and Rui Li. "Multi-Physics Modeling and Planning Tool for Tailoring of Quenching Process of Representative Airframe Structural Components." In Vertical Flight Society 81st Annual Forum and Technology Display. The Vertical Flight Society, 2025. https://doi.org/10.4050/f-0081-2025-389.

Full text
Abstract:
Quenching is the most critical step in the sequence of heat-treating operations, aiming to preserve the solid solution formed at the solution heat-treating temperature by rapidly cooling the material to near room temperature. Currently, there is no reliable, performance-informed quenching process that can consistently reduce the high scrap rate of airframe aluminum forging parts, which often suffer from significant residual stress and distortion. This limitation stems from the complex interactions between temperature, phase transformations, and stress/strain behavior—each influenced by the evo
APA, Harvard, Vancouver, ISO, and other styles
3

Libre, Jr., Roneh Glenn D., Jason Maximino C. Ongpeng, and Julius Leaño Jr. "Mechanical Performance of Treated (Bamboo) Fiber Textile Using Wide-width Tensile Test." In IABSE Symposium, Tokyo 2025: Environmentally Friendly Technologies and Structures: Focusing on Sustainable Approaches. International Association for Bridge and Structural Engineering (IABSE), 2025. https://doi.org/10.2749/tokyo.2025.2397.

Full text
Abstract:
<p>Textile fiber reinforcement made of natural fibers provides a more environment-friendly approach by lowering the overall carbon footprint of construction. Bamboo Fiber Textiles (BFT) extracted from scrap <i>Bambusa blumeana </i>(Bamboo) poles using 5 % Sodium Hydroxide solution and treated with 10% Aluminium Sulfate solution were used to twine cordages and plain textile grids. Bamboo cordages were subjected to direct tensile tests to determine the tenacity while plain grids with 20 mm spacing were subjected to tensile tests as described by ASTM D4595 or the Standard Test M
APA, Harvard, Vancouver, ISO, and other styles
4

Victor Christy, John, Abdel-Hamid I. Mourad, and Jaber Abu Qudeiri. "Tribological Analysis of Squeeze Stir Cast Recycled Aluminum MMC’s." In ASME 2021 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/pvp2021-62819.

Full text
Abstract:
Abstract In this work, squeeze stir casting was used to produce recycled Aluminum Metal Matrix Composites (MMC’s) plates. Scrap Aluminum Alloy Wheel (SAAW) was used as a matrix and alumina as reinforcement. The produced recycled MMC plate was subjected to abrasive and sliding wear using a Two-body abrasion tester and Pin-on-Disc tester with a load of 20 N. To improve the wear resistance of the recycled MMC, graphite (1% to 4%) and SiC (3% and 6%) were added to alumina, and the results were compared. The results showed that the addition of graphite and SiC to alumina decreased the wear rate and
APA, Harvard, Vancouver, ISO, and other styles
5

Narayana Swamy, Ashvin Kumar, and Evgeny Shafirovich. "Water Splitting by Aluminum Powder Obtained From Foil." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88150.

Full text
Abstract:
The reaction of aluminum with water has the potential for on demand hydrogen generation. Conventional aluminum powders, however, react with water slowly due to a highly protective oxide layer on the particle surface. The present paper investigates the preparation of an activated aluminum powder from aluminum foil that is widely available as scrap and waste. The obtained results demonstrate that a highly reactive, fine aluminum powder can be obtained from aluminum foil by high-energy ball milling with sodium chloride. The obtained powder readily reacts with hot water, releasing hydrogen. The pr
APA, Harvard, Vancouver, ISO, and other styles
6

Gabsa, Steffen. "Influence of different oxide thicknesses on the friction induced and continuous solid-state recycling of aluminum scrap." In Material Forming. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-272.

Full text
Abstract:
Abstract. Saving emissions and a circular economy are key aspects of sustainable production and compliance global climate change targets. Friction-induced solid-state recycling of aluminum scrap to production endless semi-finished products. Scrap is fed into a continuously rotating wheel. This requires less energy compared to heat-based recycling processes. Different sizes, shapes and surfaces of chips can be used as starting material in the process. The influence of this has been shown in past publications. A native oxide layer is a fixed component of aluminum surface. This layer is broken up
APA, Harvard, Vancouver, ISO, and other styles
7

Christy, John Victor, and Abdel Hamid Ismail Mourad. "Friction Stir Welding of Hybrid Recycled Metal Matrix Composites." In ASME 2022 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/pvp2022-84429.

Full text
Abstract:
Abstract In this work, conventional Friction Stir Welding (FSW) was used to investigate the weldability of recycled hybrid Aluminum Matrix Composites (AMCs). The novel composites were developed by squeeze stir casting process of scrap aluminum alloy wheels of cars as matrix and 4 wt.% of graphite, and 5 wt% of alumina as reinforcements. The casting parameters optimized from our previous work, such as squeeze pressure of 100 MPa, squeeze time of 45s, die preheating temperature of 250°C, and stirrer speed of 525 rpm, were used while casting the hybrid AMC rods. 4 mm plates were cut from each rod
APA, Harvard, Vancouver, ISO, and other styles
8

MIKOLAJČÍK, M. "Impact of Increased Iron Content and Manganese Addition on Intermetallic Phases and Fatigue Resistance of AlSi7Mg0.6 Secondary Alloy." In Quality Production Improvement and System Safety. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902691-5.

Full text
Abstract:
Abstract. One of the most often utilized metals in a variety of industries is aluminium alloy. Secondary aluminium alloys have drawn a lot of interest in recent years. Scrap aluminium may be recycled, which is good for the environment. In addition, compared to primary aluminium, it produces at a lower cost due to its lower energy requirement. Because it adversely affects their characteristics, secondary aluminium alloys' higher iron concentration presents the most frequent challenge. Manganese can be added to reduce its impact to some level. The objective of this research is to improve our kno
APA, Harvard, Vancouver, ISO, and other styles
9

Zafar, Fahad, Pedro Silva, Cláudia Lopes, Ana Reis, Manuel Vieira, and Omid Emadinia. "Upcycling Aluminium Chips to Powder Feedstocks for Powder Metallurgy Applications." In Euro Powder Metallurgy 2023 Congress & Exhibition. EPMA, 2023. http://dx.doi.org/10.59499/ep235764227.

Full text
Abstract:
The aluminium scrap, either from industry or end-of-life consumer products is generally melted to recycle aluminium. This recycling approach can still consume up to one-third of the energy consumed to produce primary aluminium since it also requires the addition of primary aluminium apart from other processing. Aluminium metal swarf, a waste from subtractive manufacturing processes can be upcycled to produce metal powders. Conventionally, aluminium powders are produced using atomization processes with considerable energy and inert gas consumption. Thus, it is worth evaluating approaches like m
APA, Harvard, Vancouver, ISO, and other styles
10

Godart, Peter, Jason Fischman, and Douglas Hart. "High-Power Fuel Cell Systems Fueled by Recycled Aluminum." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10478.

Full text
Abstract:
Abstract Presented here is a novel system that uses an aluminum-based fuel to continuously produce electrical power at the kW scale via a hydrogen fuel cell. This fuel has an energy density of 23.3 kWh/L and can be produced from abundant scrap aluminum via a minimal surface treatment of gallium and indium. These additional metals, which in total comprise 2.5% of the fuel’s mass, permeate the grain boundary network of the aluminum and disrupt its oxide layer, thereby enabling the fuel to react exothermically with water to produce hydrogen gas and aluminum oxyhydroxide, an inert and valuable byp
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Aluminum cans Scrap' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography