Relevant bibliographies by topics / Amorphous modification

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Amorphous modification'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Amorphous modification.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Amorphous modification"

1

Velev, Valentin. "THERMO - MECHANICAL MODIFICATION OF AMORPHOUS POLYESTER FIBRES: I. DEFORMATION BEHAVIOUR." Journal scientific and applied research 4, no. 1 (2013): 223–28. http://dx.doi.org/10.46687/jsar.v4i1.101.

Full text
Abstract:
The deformation behaviour of as-spun amorphous poly (ethylene terephthalate) (PET) yarns subjected to simultaneous thermal and mechanical treatments has been studied. The samples heat mechanical treatments were realized using constructed and produced in the author’s laboratory device. Thermal deformation experiments were carried out on conditions of linear samples heating from room temperature up to 200 0C while they were subjected to a well-defined constant tensile force. It was observed very interesting and seemingly strange dependence of the final fibre length from the values of the applied
APA, Harvard, Vancouver, ISO, and other styles
2

Velev, Valentin, Anton Popov, Pencho Kyurkchiev, Lyubomira Veleva та Rusalia Mateva. "THERMO-MECHANICALLY MODIFICATION OF AMORPHOUS POLYESTER FIBRES: ІІ. CALORIMETRIC INVESTIGATIONS". Journal scientific and applied research 4, № 1 (2013): 229–34. http://dx.doi.org/10.46687/jsar.v4i1.102.

Full text
Abstract:
The present work is devoted to the investigation of the structure developments in as-spun amorphous poly (ethylene terephthalate) (PET) occurred as a result of heat mechanical treatments. The deformation behavior of as-spun amorphous poly (ethylene terephthalate) (PET) yarns subjected to simultaneous thermal and mechanical treatments has been studied. It was found that the applied tensile force simultaneously with the linear heating of the studied PET yarns strongly affects the samples deformation behaviour. Differential scanning calorimetry (DSC) has been used to study the structural rearrang
APA, Harvard, Vancouver, ISO, and other styles
3

Darusman, Fitrianti, Iyan Sopyan, Nadya Azzahra, and Taofik Rusdiana. "The solid-state modification for solubility enhancement of practically insoluble glimepiride: A systematic review." Journal of Pharmacy & Pharmacognosy Research 13, no. 2 (2025): 497–512. http://dx.doi.org/10.56499/jppres24.2101_13.2.497.

Full text
Abstract:
Context: Solubility is a crucial physicochemical property of pharmaceuticals that directly influences the absorption and bioavailability of drugs within the human body. Glimepiride, an oral anti-diabetic agent included in the Biopharmaceutics Classification System (BCS) class II, is practically insoluble in water. Various solid-state modification techniques have been implemented to improve the solubility of glimepiride, namely by the formation of co-crystals, co-amorphous, inclusion complexes, and solid dispersions. Aims: To systematically review the enhancement of glimepiride solubility after
APA, Harvard, Vancouver, ISO, and other styles
4

Hertsyk, О. М., Yu O. Kulyk, S. A. Korniy, V. K. Nosenko, N. L. Pаndiak, and M. S. Tashak. "Low-temperature modification of cobalt amorphous alloys." Physicochemical Mechanics of Materials 61, no. 2 (2025): 57–63. https://doi.org/10.15407/pcmm2025.02.057.

Full text
Abstract:
High-temperature modification (T = 77 K) of strip-like Co72Fe5Si11B12, Co73,6Fe3,2Mn3,2Si5B15 and Co73,6(Fe, Ni, Mo, Mn)5,7(Si0,2B0,8)21 amorphous alloys was performed for the first time. Corrosion resistance of such modified strips in 0.15 M aqueous solution of NaCl was evaluated by different physicochemical methods. It was established that as a result of low-temperature processing some change in the morphology and elemental composition, as well as the orderliness of the structure of cobalt amorphous alloys occurs, which leads to a change in the electrochemical parameters. The possibility of
APA, Harvard, Vancouver, ISO, and other styles
5

Kozyukhin, Sergey A., Petr I. Lazarenko, Yuri V. Vorobyov, et al. "Laser-induced modification of amorphous GST225 phase change materials." Matériaux & Techniques 107, no. 3 (2019): 307. http://dx.doi.org/10.1051/mattech/2019008.

Full text
Abstract:
In this paper, we have studied the crystallization behavior of amorphous GST225 thin films upon irradiation with nanosecond laser pulses. Crystalline and melt-quenched amorphous regions were produced by exposure to laser single or multipulses, and were characterized by the optical microscopy and by the micro-Raman spectroscopy. Transition region between the amorphous and crystalline parts of the laser-modified area was investigated by atomic force microscopy. Using irradiation by single laser pulses with varying fluence, it was verified that crystallization was possible if the fluence is more
APA, Harvard, Vancouver, ISO, and other styles
6

Iqbal, Muhammad, J. I. Akhter, A. Qayyum, Y. Javed, M. Rafiq, and A. A. Khuram. "Surface Modification and Characterization of Bulk Amorphous Materials." Key Engineering Materials 510-511 (May 2012): 43–50. http://dx.doi.org/10.4028/www.scientific.net/kem.510-511.43.

Full text
Abstract:
Bulk metallic glasses (BMGs) are well known for their promising properties. Surface properties can be further improved by using certain techniques such as electron beam melting (EBM), laser beam melting (LBM), ion irradiation, ion implantation and neutron irradiation. BMGs especially Zr-based BMGs have numerous applications as structural materials. In this manuscript, the results are presented on microstructural investigations and phase formations in Zr-based BMGs modified by using above mentioned techniques. Microstructure was studied by scanning electron microscopy (SEM). Phase analysis was
APA, Harvard, Vancouver, ISO, and other styles
7

HERTSYK, Оksana, Myroslava KOVBUZ, and Mariya LOPACHAK. "CHEMICAL MODIFICATION OF THE AMORPHOUS METALLIC ELECTRODES." Proceedings of the Shevchenko Scientific Society. Series Сhemical Sciences 2021, no. 66 (2021): 57–67. http://dx.doi.org/10.37827/ntsh.chem.2021.66.057.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Silva, S. R. P., J. Robertson, G. A. J. Amaratunga, et al. "Nitrogen modification of hydrogenated amorphous carbon films." Journal of Applied Physics 81, no. 6 (1997): 2626–34. http://dx.doi.org/10.1063/1.363927.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Corcoran, J. C., and S. A. Lee. "Pressure-Induced Modification of Hydrogenated Amorphous Carbon." Spectroscopy Letters 26, no. 4 (1993): 565–74. http://dx.doi.org/10.1080/00387019308011554.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

ROZANSKI, ARTUR, and ANDRZEJ GALESKI. "Modification of amorphous phase of semicrystalline polymers." Polimery 57, no. 6 (2012): 433–40. http://dx.doi.org/10.14314/polimery.2012.433.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Amorphous modification"

1

Almeida, Serrita Avril. "Modification of amorphous silicon nitride surfaces by ion implantation of gallium." Thesis, University of Surrey, 1999. http://epubs.surrey.ac.uk/843307/.

Full text
Abstract:
This study was undertaken to investigate the possibility of synthesis of nitride based semiconductors. To this end hydrogenated amorphous silicon nitride (a-SiNx:Hy) has been deposited as the starting material using PECVD (plasma enhanced chemical vapour deposition). Then the effects of implanting gallium into the a-SiNx:H target material have been studied with the aim of forming GaN compounds. Should this technique work, it opens the possibility of carrying out similar synthesis of Al, hi and other nitride based compounds. PECVD hydrogenated amorphous silicon nitride thin films are studied as
APA, Harvard, Vancouver, ISO, and other styles
2

Chai, Meng Koon. "Modification of metal contacts to hydrogenated amorphous silicon by ion bombardment." Thesis, University of Surrey, 1998. http://epubs.surrey.ac.uk/843707/.

Full text
Abstract:
This thesis is concerned with the formation, characterisation and application of doped surface layers in hydrogenated amorphous silicon, a-Si:H. In this study, a-Si:H films have been deposited using a plasma enhanced chemical vapour deposition (PECVD) system and have been doped using ion implantation. In order to determine the efficiency of implantation doping various ion species, ion doses, and ion energies were made by direct implantation of impurities at low energies. Coupled with the annealing effect, the effect of doping on damage recovery has been studied. It has been shown that there is
APA, Harvard, Vancouver, ISO, and other styles
3

Meng, Xiangtao. "Chemical Modification of Cellulose Esters for Oral Drug Delivery." Diss., Virginia Tech, 2016. http://hdl.handle.net/10919/71383.

Full text
Abstract:
Polymer functional groups have critical impacts upon physical, chemical and mechanical properties, and thus affect the specific applications of the polymer. Functionalization of cellulose esters and ethers has been under extensive investigation for applications including drug delivery, cosmetics, food ingredients, and automobile coating. In oral delivery of poorly water-soluble drugs, amorphous solid dispersion (ASD) formulations have been used, prepared by forming miscible blends of polymers and drugs to inhibit crystallization and enhance bioavailability of the drug. The Edgar and Tay
APA, Harvard, Vancouver, ISO, and other styles
4

Van, Zyl A. J. P. (Andries Jakobus Petrus). "Synthesis, characterization and testing of nano-structured particles for effective impact modification of glassy amorphous polymers." Thesis, Stellenbosch : Stellenbosch University, 2003. http://hdl.handle.net/10019.1/53609.

Full text
Abstract:
Thesis (PhD)--Stellenbosch University, 2003.<br>ENGLISH ABSTRACT: The synthesis of structured nanoparticles, in particular core/shells, IS of great technological and economical importance to modem materials science. One of the advantages of structured particles is that they can be synthesized with either a solid core (albeit soft or hard) or a liquid core (of varying viscosity). This adds to the versatility of structured particles and their relevance to a majority of industrial and commercial endapplications. The synthesis of core/shell particles with liquid cores was investigated for th
APA, Harvard, Vancouver, ISO, and other styles
5

Cormier, Lyne Mercedes. "An investigation of passivity and breakdown of amorphous Cr-B thin films for surface modification of metallic biomaterials." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0002/NQ35132.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bordel, Catherine. "Etude de la modification par nitruration des propriétés magnétiques des alliages amorphes TbFe et TbFeCo." Université Joseph Fourier (Grenoble), 1997. http://www.theses.fr/1997GRE10174.

Full text
Abstract:
Nous avons elabore par pulverisation cathodique des couches minces amorphes de tbfe et tbfeco nitrurees, dans le but d'etudier le role de l'azote sur les proprietes magnetiques de ces alliages. Des experiences de spectroscopie d'absorption x mettent en evidence l'existence d'un ordre structural local dans les echantillons tbfe(co), que nous considerons comme l'origine de l'anisotropie magnetique perpendiculaire presente dans ces alliages. Les mesures magnetiques macroscopiques montrent une modification tres importante des proprietes magnetiques, notamment une forte reduction de la temperature
APA, Harvard, Vancouver, ISO, and other styles
7

Rios, de Anda Agustin. "Influence of the solvent sorption, additivation, and chemical modification on the molecular mobility dynamics of Polyamide 6,6 amorphous phase and its consequences on the tensile and impact strength properties of this polymer." Thesis, Lyon 1, 2012. http://www.theses.fr/2012LYO10259/document.

Full text
Abstract:
Ce travail s’inscrit dans le projet de développement des réservoirs essence pour voitures à partir des formulations Polyamide 6,6 (PA6,6). Le PA6,6 est un bon candidat pour des applications techniques car il possède des bonnes propriétés thermomécaniques rapportés à son poids. Ces formulations doivent montrer des bonnes propriétés barrière aux essences classiques, aux biofuels (essence contenant de l’éthanol) et aussi à l’eau qui est présente dans l’atmosphère, tout en ayant une bonne tenue aux chocs.Les enjeux scientifiques sont la meilleure compréhension des interactions entre le PA6,6 et de
APA, Harvard, Vancouver, ISO, and other styles
8

Rios, de Anda Agustin, and de Anda Agustin Rios. "Influence of the solvent sorption, additivation, and chemical modification on the molecular mobility dynamics of Polyamide 6,6 amorphous phase and its consequences on the tensile and impact strength properties of this polymer." Phd thesis, Université Claude Bernard - Lyon I, 2012. http://tel.archives-ouvertes.fr/tel-00933978.

Full text
Abstract:
This work forms part of a project aimed to develop Polyamide 6,6(PA6,6)-based automotive fuel tanks. PA6,6 is a good candidate for technical applications since it possesses good thermo-mechanical properties compared to its weight. These formulations must exhibit good impermeable properties to classic gasoline, to biofuels (gasoline containing ethanol), and to water which is found in the atmosphere, while keeping good impact behavior.The scientific issues are the better understanding of PA6,6-solvent interactions in the case of a series of solvents having different sizes and polarities and also
APA, Harvard, Vancouver, ISO, and other styles
9

Brown, Stuart Fyfe. "An investigation into thermally induced structural modifications in isotactic polypropylene and its blends with amorphous terpolymers." Thesis, University of Abertay Dundee, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.304681.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pak, Sang J. "Synthesis and characterization of novel macromolecules/networks via side chain modifications of amorphous poly(arylene ethers)." Diss., Virginia Tech, 1994. http://hdl.handle.net/10919/40305.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Amorphous modification"

1

In the matter of certain amorphous metal alloys and amorphous metal articles: Exclusion order modification : proceedings : investigation no. 337-TA-143. U.S. International Trade Commission, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cormier, Lyne Mercedes. An investigation of passivity and breakdown of amorphous Cr-B thin films for surface modification of metallic biomaterials. 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Amorphous modification"

1

Ovshinsky, Stanford R. "Chemical Modification of Amorphous Chalcogenides." In Disordered Materials. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-8745-9_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wesch, Werner, Tobias Steinbach, and Mark C. Ridgway. "Swift Heavy Ion Irradiation of Amorphous Semiconductors." In Ion Beam Modification of Solids. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33561-2_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rappich, Jörg. "Electrochemical Passivation and Modification of c-Si surfaces." In Physics and Technology of Amorphous-Crystalline Heterostructure Silicon Solar Cells. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-22275-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Iwasaki, Chihiro, Masami Aono, Nobuaki Kitazawa, and Yoshihisa Watanabe. "Changes in Surface of Amorphous Carbon by Nitrogen Ion Beam Irradiation." In Surface Modification Technologies XVIII: Proceedings of the Eighteenth International Conference on Surface Modification Technologies Held in Dijon, France November 15-17, 2004: v. 18, 18th ed. CRC Press, 2023. http://dx.doi.org/10.1201/9781003423874-22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sabbah, Hussein, Abdelkader Zebda, Soraya Ababou-Girard, et al. "Modification of Amorphous Carbon Film Surfaces by Thermal Grafting of Alkene Molecules." In Springer Proceedings in Physics. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-95930-4_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hartmann, E., R. J. Behm, and F. Koch. "Writing of Local, Electrically Active Structures in Amorphous Silicon Films by Scanning Tunneling Microscopy." In Atomic and Nanometer-Scale Modification of Materials: Fundamentals and Applications. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2024-1_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hyla, I., J. Myalski, and W. Grellmann. "Modification of Polymers by Means of Amorphous Carbon for Optimization of Tribological Properties." In Deformation and Fracture Behaviour of Polymers. Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-662-04556-5_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kuji, Chieko. "Blanked Surface Characteristics of Amorphous Alloys with Local Microstructure Modification by Ultrashort Pulsed Laser." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8643-9_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lyashenko, Inna, Vladimir Konovalov, Vladimir Lopatka, et al. "Modification of Optical Properties of Amorphous Metallic Mirrors Due to Impact of Deuterium Plasma." In Recent Advances in Technology Research and Education. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-99834-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sakai, A., T. Tatsumi, and K. Ishida. "7×7 Superstructure at the Amorphous Si/Si(111) Interface and Its Modification During Solid Phase Epitaxial Growth." In Ordering at Surfaces and Interfaces. Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84482-9_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Amorphous modification"

1

Smayev, M. P., I. A. Budagovsky, D. O. Kuzovkov, and P. I. Lazarenko. "Modification of Amorphous Ge2Sb2Te5 Film by XZ Femtosecond Laser Scanning." In 2024 International Conference Laser Optics (ICLO). IEEE, 2024. http://dx.doi.org/10.1109/iclo59702.2024.10624493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Paudyal, Samridhdi, and Chunfang Fan. "Development of Inorganic Scale Inhibitors for Ultrahigh-Temperatures Geothermal and HPHT Applications." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20727.

Full text
Abstract:
Abstract With the advancement in green technology-based energy generation to achieve net-zero emissions, geothermal energy has been considered one of the options to reduce the carbon footprint from oil/gas production. In this paper, geothermal energy refers to energy generation that involves a high-pressure, high-temperature (HPHT) environment. Both geothermal energy generation and oil and gas production in such environments—which includes the use of steam-flooded wells and geothermal wells are always challenging as a result of operational issues caused by inorganic scale formation. Changes in
APA, Harvard, Vancouver, ISO, and other styles
3

Marais, Willem-Louis. "MEA Triazine Contactor Optimization to Increase Efficiency and Reduce Fouling Potential." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20391.

Full text
Abstract:
Abstract Liquid absorbents have been utilized for decades to remove impurities from produced natural gas. Throughout the last 15 years, monoethanolamine (MEA) triazine has become an industry-recognized name for the removal of sour gas (H2S). MEA triazine has one of the lowest cost profiles in terms of cost per mass of H2S removed and has obtained a commodity status. It is widely used in the oil and gas industry, both on production (upstream, midstream) and processing (downstream). MEA Triazine is typically applied via direct injection into flowlines or applied in contactor vessels (“scrubbers”
APA, Harvard, Vancouver, ISO, and other styles
4

Iqbal, M., N. Yasmin, M. U. Rajput, S. Z. Hussain, and I. Ahmad. "Modification of amorphous materials by various surface modification techniques." In 2016 13th International Bhurban Conference on Applied Sciences and Technology (IBCAST). IEEE, 2016. http://dx.doi.org/10.1109/ibcast.2016.7429849.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vukelic, S., B. Gao, S. Ryu, and Y. L. Yao. "Structural Modification of Amorphous Fused Silica Under Femtosecond Laser Irradiation." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72210.

Full text
Abstract:
Non-linear absorption of femtosecond laser pulses enables the induction of structural changes in the interior of bulk transparent materials without affecting their surface. This property can be exploited for the transmission welding of transparent dielectrics, three dimensional optical data storages and waveguides. In the present study, femtosecond laser pulses were tightly focused within the interior of bulk fused silica specimen. Localized plasma was formed, initiating rearrangement of the network structure. The change in material properties were studied through employment of spatially resol
APA, Harvard, Vancouver, ISO, and other styles
6

Hertsyk, Oksana, Tetiana Hula, Myroslava Kovbuz, Olga Yezerska, and Myroslava Tashak. "Surface Modification of Amorphous Alloys with Heterofunctional Oligoperoxide Metallic Complexes." In 2023 IEEE 13th International Conference Nanomaterials: Applications & Properties (NAP). IEEE, 2023. http://dx.doi.org/10.1109/nap59739.2023.10310917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Poperenko, Leonid, and Kateryna Vinnichenko. "Surface microroughness characterisation of amorphous metallic ribbons during their relief modification." In Optical Systems Design 2005. SPIE, 2005. http://dx.doi.org/10.1117/12.625436.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ruffner, J. A., M. D. Himel, and Ursula J. Gibson. "Stress modification in ZnS thin films." In OSA Annual Meeting. Optica Publishing Group, 1988. http://dx.doi.org/10.1364/oam.1988.thv7.

Full text
Abstract:
Thermally evaporated ZnS forms dense polycrystalline films which exhibit compressive stress that may lead to structural failure of thicker samples. However, we have observed that ZnS films deposited onto liquid nitrogen cooled substrates are amorphous and exhibit tensile stress and lower refractive indices. The last two factors indicate that the cooled films have a lower density than conventionally deposited films. Ion assisted deposition (IAD) can be used to densify a film which leads to increased compressive stress. We have investigated the possibility of tuning the stress within a ZnS film
APA, Harvard, Vancouver, ISO, and other styles
9

Lin, Chien-Hung, Jia-Hsiang Liu, and I. Min Chan. "Interface modification of ZnO:B Transparent Conducting Oxides for amorphous silicon solar cells." In 2011 37th IEEE Photovoltaic Specialists Conference (PVSC). IEEE, 2011. http://dx.doi.org/10.1109/pvsc.2011.6186585.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Himel, M. D., J. A. Ruffner, and Ursula J. Gibson. "Modification of structure and waveguiding properties of evaporated ZnS films." In OSA Annual Meeting. Optica Publishing Group, 1988. http://dx.doi.org/10.1364/oam.1988.wh3.

Full text
Abstract:
We have observed that the dominant loss mechanism in thermally deposited ZnS films is internal scattering at grain boundaries within the film. To reduce crystalline effects, we deposited ZnS onto liquid nitrogen cooled substrates. X-ray diffraction indicates that these films are amorphous and they exhibit significantly lower losses (&lt;1 dB/cm) than films deposited at ambient temperatures (≃ 10 dB/cm). The cooling process may also reduce film density, which results in a lower refractive index and tensile stress within the ZnS films. Preliminary results on nonlinear properties of the cooled fi
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Amorphous modification' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography