To see the other types of publications on this topic, follow the link: Amphoteres.

Dissertations / Theses on the topic 'Amphoteres'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 34 dissertations / theses for your research on the topic 'Amphoteres.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

KERTESZ, CHRISTINE. "Structure et proprietes amphoteres de gels de dioxyde de titane." Paris 6, 1991. http://www.theses.fr/1991PA066175.

Full text
Abstract:
L'etude porte sur la comprehension des phenomenes responsables de la retention par le dioxyde de titane, d'ions en solution. On cherche notamment a correler la structure du solide a ses proprietes amphoteres en solution aqueuse. Un etat des connaissances sur la formation de gels d'oxydes mineraux et sur leur structure est donne. Differents modes de synthese de gels de dioxyde de titane sont presentes. Le materiau selectionne est caracterise par diffraction de rayons x, microscopie electronique, mesure de porosite par bet. Un modele a deux phases prenant en compte la nature poreuse du solide et permettant d'appliquer la loi d'action de masse est adopte. L'etude des proprietes amphoteres de l'oxyde est realisee par la technique de titrage potentiometrique. Les bouches a hysteresis observees entre les titrages aller et retour sont attribuees a la lenteur des reactions de neutralisation acido-basique. Les principales caracteristiques du solide (point isoelectrique, capacite de retention d'anions et de cations) sont ainsi determinees. Les valeurs trouvees sont confirmees par analyse par activation neutronique et microanalyse x. Un examen de la cinetique des reactions de neutralisation montre que, selon l'intensite de l'agitation de la suspension, l'etape limitant la vitesse peut etre soit la diffusion dans le film soit la diffusion dans la particule. Dans ce dernier cas, les coefficients moyens de diffusion des ions dans le solide sont evalues
APA, Harvard, Vancouver, ISO, and other styles
2

Nottelet, Benjamin. "SYNTHESE ET CARACTERISATION DE NOUVEAUX POLYESTERS BIODEGRADABLES ET HYDROSOLUBLES A FONCTIONS CATIONIQUES OU AMPHOTERES." Phd thesis, Université Montpellier II - Sciences et Techniques du Languedoc, 2005. http://tel.archives-ouvertes.fr/tel-00110595.

Full text
Abstract:
Il n'existe à l'heure actuelle pratiquement pas de copolymères greffés à fonctions cationiques et/ou amphotères présentant une dégradabilité intrinsèque. L'objectif de cette thèse est de générer des composés répondant à ces critères à partir d'une méthode de modification chimique par voie anionique de poly(e-caprolactone) (PCL). A cette fin, deux stratégies principales ont été suivies à partir d'un même intermédiaire réactionnel, un macropolycarbanion dérivé de PCL. La première est fondée sur l'emploi du macropolycabanion en tant qu'agent nucléophile qui réagit avec de petites molécules organiques électrophiles. Ces réactions de substitution ont permis l'obtention de copolymères à base PCL possédant entre 10 et 15% de motifs substitués par des groupes cationiques (ammonium, phosphonium), ou hydrosolubilisants (amine, acide carboxylique). Ces squelettes PCL fonctionnalisés peuvent être utilisés pour effectuer des post-modifications (réactions de couplages, dérivation de fonctions). La seconde stratégie utilise le macropolycarbanion en tant que macroamorceur de polymérisation anionique. Ce type de réaction a été appliqué à des dérivés vinyliques (4-VP, N-VP), des dérivés acryliques (DMAEM, MAPEG), des dérivés acrylamides (DMA, DMAPMA) et des dérivés cycliques (NCA d'acides a-aminés) ce qui a permis d'obtenir des copolymères greffés hydrosolubles à chaîne principale PCL. Ces composés ont des structures partiellement dégradables et forment en solution aqueuse des objets de dimensions nanométriques. Enfin, l'utilisation d'un dérivé polyiodé de PCL en tant que macro-polyagent de transfert est abordée ce qui constitue une nouvelle méthode de polymérisation radicalaire contrôlée par transfert dégénératif d'iode permettant l'obtention de structures greffées.
APA, Harvard, Vancouver, ISO, and other styles
3

BENOMAR, FATIHA. "Synthese de sulfites et sulfates cycliques f-alkyles : application a la preparation de nouveaux tensioactifs amphoteres hautement fluores." Nice, 1994. http://www.theses.fr/1994NICE4758.

Full text
Abstract:
De par leurs proprietes particulieres de surface les agents tensioactifs perfluoroalkyles ont trouve plusieurs applications aussi bien dans les domaines pratiques que dans les domaines biologiques ou biomedicaux. Le travail realise concerne la synthese et l'evaluation de nouvelles series de molecules tensioactives perfluoroalkylees qui ont la particularite de deriver des sulfobetaines f-alkylees. Tous les composes prepares sont caracterises par la presence: d'une chaine hydrophobe perfluoroalkylee et d'au moins une chaine hydrocarbonee plus ou moins longue ; d'une fonction sulfite ou sulfate ; d'une tete hydrophile cationique de type ammonium ou sulfonium quaternaire. Pour atteindre ces composes nous avons mis au point la synthese de nouveaux intermediaires reactionnels perfluoroalkyles les sulfates d'ethylene f-alkyles et les sulfites d'ethylene f-alkyles. L'etude de la reactivite de ces derniers vis-a-vis de divers composes mono- ou polyfonctionnels (amines, amines n-oxydes et sulfures) nous a permis de montrer que les sulfites et les sulfates perfluores sont de nouveaux intermediaires tres reactifs et que les reactions mises en uvre sont tres selectives et conduisent a chaque fois au produit attendu. Nous avons montre qu'il etait possible de synthetiser, de maniere selective, en une seule etape et selon des procedes simples de nouveaux tensioactifs amphoteres. Les rendements de ces syntheses sont satisfaisants et varient en moyenne de 60 a 95%. Notons enfin que quelques tensioactifs amphoteres fluorocarbones synthetises, ont ete selectionnes pour evaluer leur aptitude a former des vesicules
APA, Harvard, Vancouver, ISO, and other styles
4

Pasquini, Luca. "Ion - conducting polymeric membranes for electrochemical energy devices." Thesis, Aix-Marseille, 2015. http://www.theses.fr/2015AIXM4750.

Full text
Abstract:
La recherche vise à proposer des membranes pour des dispositifs électrochimiques capables d'atteindre le bon compromis en terme de conduction ionique, de stabilité et de longue durée de vie pour une haute efficacité.Nous avons réalisé des membranes échangeuses des protons, d'anions ou amphotères à base de polymères aromatiques stables fonctionnalisés. Des groupes sulfonique on été introduit sur la squelette du PEEK, des groupes d'ammonium sur le PEEK et le PSU ou le deux au même temps pour échanger ensemble des protons et des anions.L'optimisation continue des paramètres de synthèse, le choix des différents polymères et/ou des groupes de fonctionnalisation et l'amélioration des procédures et des traitements des membranes coulée, a conduit à de bons résultats en termes de conductivité ionique, sélectivité et stabilité.L'étude des principaux paramètres des membranes démontre une stabilité thermique entre 140 et 200 ° C selon la membrane sélectionnée, un comportement mécanique caractérisé par une résistance à la traction et un module d'élasticité élevée et un relativement faible ductilité, influencé par le niveau d’ hydratation de la membrane ou l éventuelle présence de cross-link. En optimisant le degré de fonctionnalisation et les types de groupes de fonctionnalisation, nous avons obtenu une accordable absorption d'eau, une conductivité ionique élevé pour différent ions (jusqu'à ≃ 3 mS / cm pour le polymère conducteurs des anions) et une perméabilité aux ions vanadium très faible (applications dans RFB) jusqu'à ≃ 10-10 cm2/min, ce qui est bien au-dessous des données typiques de la littérature et un paramètre très important pour applications technologiques
The research aims to propose membranes for electrochemical devices alternative to the commercial ones able to reach the right compromise in term of good ionic conduction, stability and long life time for an high efficiency. We realized proton exchange, anion exchange and amphoteric membranes based on stable functionalized aromatic polymers (PEEK, PSU). We thus introduced sulfonic groups on a PEEK backbone to exchange protons or ammonium groups on PEEK and PSU to exchange anions. We also realized amphoteric membranes able to exchange at the same time both kinds of ions. The continuous optimization of synthesis parameters, the choice of different polymers and/or functionalization groups and the improvement of casting procedures and treatments of membranes, led to good results in terms of ionic conductivity, selectivity and stability.The study of the main parameters of the synthesized membranes demonstrates a thermal stability between 140 and 200°C depending on the selected membrane, a mechanical behavior characterized by a high elastic modulus and tensile strength and a relatively low ductility strongly influenced on the degree of hydration of the membrane as well as the eventual presence of cross-linking. Working on the degree of functionalization and the type of functionalizing groups, we obtained a tunable water uptake, an elevated ionic conductivity for different ions (up to ≃ 3 mS/cm for anionic conducting polymers) and a very low ion permeability (vanadium ions for RFB applications) down to ≃ 10-10 cm2/min, which is much below typical literature data for cation- and anion separation membranes and a challenge parameters for technological applications
APA, Harvard, Vancouver, ISO, and other styles
5

Gelissen, Arjan Paul Hendrik [Verfasser], Walter [Akademischer Betreuer] Richtering, and Andrij [Akademischer Betreuer] Pich. "Amphotere Mikrogele / Arjan Paul Hendrik Gelissen ; Walter Richtering, Andrij Pich." Aachen : Universitätsbibliothek der RWTH Aachen, 2018. http://d-nb.info/118119301X/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

ENJALBERT, DELPHINE. "Design moleculaire : synthese de tensioactifs fluores bicatenaires et tricatenaires mixtes de type amphotere." Nice, 1996. http://www.theses.fr/1996NICE4936.

Full text
Abstract:
Le travail realise concerne l'etude des systemes moleculaires organises. Le but du chimiste est de pouvoir connaitre les relations entre la structure du tensioactif et la morphologie de l'agregat afin de construire la molecule la mieux adaptee a une application precise. Nous avons essaye d'etablir des relations eventuelles entre la structure moleculaire d'un tensioactif et le type de l'agregat (micelles, emulsions, microemulsions, cristaux liquides, films, vesicules, mousses). Ces resultats nous ont donc amenes a synthetiser une grande variete de nouveaux tensioactifs bicatenaires et tricatenaires mixtes hautement fluores de type amphotere grace a une strategie de synthese efficace. Pour cela, nous avons au prealable synthetise: 1/ pour l'obtention de tensioactifs bicatenaires mixtes fluores de type amphotere (carboxybetaine, sulfobetaine, n-oxyde), a-des precurseurs fluores: * des n-alkyl n-methyl 2-f-alkylethylamines (compose b), * des acides (n-2-f-alkylethyl n-alkyl amino)-3 propanoiques (compose c), b- des precurseurs hydrocarbones: * des acides n-alkyl n-methyl amino-3 propanoiques (compose g), * des acides n-alkyl n-benzyl amino-3 propanoiques (compose h), 2/ pour l'obtention de tensioactifs tricatenaires mixtes fluores de type ammonium et amphotere: * des precurseurs f-alkyles: les n-alkyl (ou n-(2-f-alkylethyl))-6-f-alkyl-4-alkyl-4-aza-hexanamides (compose d) 3/ pour l'obtention de tensioactifs tetracatenaires mixtes fluores de type bisammonium: * des precurseurs f-alkyles: les n-alkyl n-methyl 2-f-alkylethylamines (compose b). La modulation des structures nous a permis de faire varier de facon rationnelle la solubilite et les proprietes de surface. Ces parametres physicochimiques etant a la base de l'edification de systemes moleculaires organises stables, nous pensons avec optimisme qu'ils nous permettront d'envisager leur utilisation dans l'edification d'agregats tels que les mousses et les vesicules
APA, Harvard, Vancouver, ISO, and other styles
7

Huttunen, Henri. "Role of RAGE as an amphoterin receptor : from development to disease." Helsinki : University of Helsinki, 2002. http://ethesis.helsinki.fi/julkaisut/eri/biote/vk/huttunen/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Leão, Cláudio. "Desenvolvimento e validação de metodologia para a determinação de monocloroacetato de sódio e dicloroacetato de sódio em cocoamido,N-[(3-dimetilamino)propil],betaína via cromatografia a gás: GC/FID, GC/ECD e GC/MS." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-22082016-150806/.

Full text
Abstract:
O monocloroacetato de sódio (MCAS) e o dicloroacetato de sódio (DCAS) são compostos tóxicos e irritantes ao ser humano e nocivos ao meio ambiente, sendo impurezas indesejáveis na cocoamido propil betaína (CAPB), que é um surfactante anfótero utilizado em produtos de consumo dos segmentos cosmético e domiciliar. Diante dos requisitos de concentração em nível de mg/kg exigidos pelos órgãos reguladores de saúde do governo, tornou-se mandatório o emprego de metodologia com limite de quantificação, precisão e exatidão adequados aos rígidos controles de processo pelos fabricantes da CAPB, bem como, dispor de técnicas convencionais com poder de resolução e proficiência pelo controle de qualidade e neste contexto inseriu-se a cromatografia a gás. Neste estudo foram estabelecidos os procedimentos analíticos que definiram as melhores condições para identificar e quantificar as impurezas MCAS e DCAS na matriz CAPB por meio da cromatografia a gás. A preparação das amostras consistiu da derivação das impurezas MCAS e DCAS a ésteres etílicos e a extração líquido-líquido em hexano para separar dos demais constituintes da matriz. Os modos de detecção acoplados à cromatografia a gás foram a ionização pela chama (GC/FID), a captura de elétrons (GC/ECD) e a espectrometria de massas (GC/MS). A validação comprovou que as metodologias são lineares entre 4 e 50 mg/kg com recuperação de 70 a 120%, apresentam limites de quantificação inferiores a 10 mg/kg e produziram médias e incertezas similares na amostra examinada, constituindo-se alternativas para a determinação de cloroacetatos em betaínas.
The sodium monochloroacetate (MCAS) and the sodium dichloroacetate (DCAS) are toxic and irritating compounds to humans and harmful to the environment, being undesirable impurities in cocoamidepropyl betaine (CAPB), which is a amphoteric surfactant used in consumer products of cosmetic and household segments. Considering the content requirements at level mg/kg defined by governmental health agency, became mandatory the use of analytical methods with appropriate precision, accuracy and quantification limit to rigid process controls by CAPB manufacturers, as well as, to have available conventional techniques with good resolution and proficiency for quality control staff and in this context was inserted the gas chromatography. In this study, the analytical procedures were established to define the best conditions to identify and quantify the impurities MCAS and DCAS in CAPB matrix by gas chromatography. The sample preparation consisted of MCAS and DCAS derivation to ethyl esters and liquid-liquid extraction in hexane to separate them from the other constituents of matrix. The detection modes coupled to gas chromatography were the flame ionization (GC/FID), electron capture (GC/ECD) and mass spectrometry (GC/MS). The validation ensured that the methodologies are linear between 4 and 50 mg/kg with recovery 70 to 120%, presents quantification limits less than 10 mg/kg and produced similar averages and uncertainties in the examined sample, constituting an alternative for determination of chloroacetates in betaines.
APA, Harvard, Vancouver, ISO, and other styles
9

Fages, Carol. "mRNA localization and cell motility : roles of heparin-binding proteins amphoterin and HG-GAM in cell migration." Helsinki : University of Helsinki, 2000. http://ethesis.helsinki.fi/julkaisut/mat/bioti/vk/fages/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Siepi, Evgenios [Verfasser], Sven-Erik [Akademischer Betreuer] Behrens, Andreas [Akademischer Betreuer] Langner, and Hans [Akademischer Betreuer] Binder. "Mechanism of amphoteric liposomes & application for siRNA delivery / Evgenios Siepi. Betreuer: Sven-Erik Behrens ; Andreas Langner ; Hans Binder." Halle, Saale : Universitäts- und Landesbibliothek Sachsen-Anhalt, 2010. http://d-nb.info/1025011341/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Schmid, Andreas J. Verfasser], Walter [Akademischer Betreuer] Richtering, and Andrij Z. [Akademischer Betreuer] [Pich. "Amphoteric microgels for uptake and release of polyelectrolytes in dilute and concentrated solution / Andreas J. Schmid ; Walter Richtering, Andrij Pich." Aachen : Universitätsbibliothek der RWTH Aachen, 2016. http://d-nb.info/1130792854/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Schmid, Andreas Josef [Verfasser], Walter Akademischer Betreuer] Richtering, and Andrij Z. [Akademischer Betreuer] [Pich. "Amphoteric microgels for uptake and release of polyelectrolytes in dilute and concentrated solution / Andreas J. Schmid ; Walter Richtering, Andrij Pich." Aachen : Universitätsbibliothek der RWTH Aachen, 2016. http://d-nb.info/1130792854/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Reinsch, Christian [Verfasser], Sven-Erik [Akademischer Betreuer] Behrens, Ingo [Akademischer Betreuer] Heilmann, and Philipp [Akademischer Betreuer] Wiedemann. "Development and characterization of amphoteric liposomes for the delivery of oligonucleotides in vitro and in vivo / Christian Reinsch. Betreuer: Sven-Erik Behrens ; Ingo Heilmann ; Philipp Wiedemann." Halle, Saale : Universitäts- und Landesbibliothek Sachsen-Anhalt, 2011. http://d-nb.info/1025301315/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Norton, Dean Stephen. "Capillary Electrochromatography-Mass Spectrometry (CEC-MS) of Surfactants." Digital Archive @ GSU, 2007. http://digitalarchive.gsu.edu/chemistry_diss/13.

Full text
Abstract:
This research presents advancements in the coupling of capillary electrochromatography (CEC) to mass spectrometry (MS) for the analysis of different chemical classes of surfactants. Chapter 1 provides a brief introduction that summarizes the mechanics and fundamentals of CEC, including instrumentation and applications for CEC-MS. Chapter 2 describes the on-line hyphenation of a packed CEC column with an internally tapered tip coupled to electrospray ionization-mass spectrometry (ESI-MS) and atmospheric pressure chemical ionization-mass spectrometry (APCI-MS) for the analysis of betaine-type amphoteric or zwitterionic surfactants (Zwittergent®). The interesting aspects include CEC-MS column manufacture and charaterization, as well as a comparison between the CEC-ACPI-MS and CEC-ESI-MS ionization pattern of zwittergents. In Chapter 3, the CEC-MS of alkyltrimethyl-ammonium ions (ATMA+) with chain length ranging from C1-C18 is optimized using an internally tapered CEC-MS column packed with mixed mode C6/strong cation exchange stationary phase and coupled to an ESI source. In addition, the optimized CEC-ESI-MS protocol is applied for the challenging analysis of commercial sample Arquad S-50 ATMA+ containing cis-trans unsaturated and saturated soyabean fatty acid derivatives. In Chapter 4, a novel CEC-UV method for separation of the various Triton X-100 oligomers is presented. A systematic mobile phase tuning and comparison of monomeric vs. polymeric stationary phases was conducted. In Chapter 5, we present the first application of CEC coupled to MS for analysis of Triton X (TX-) series surfactants. A characterization from the viewpoint of the ion and adduct formation for TX-series nonionic surfactants with a variable number of ethoxy units (n=1.5-16) in the scan mode are first discussed. Next, utilizing the TX-series as model alkylphenolpolyethoxylates (APEOs), a detailed investigation of the chromatographic separation and MS detection are performed followed by analysis of very long chain TX series with n=30-70. In Chapter 6, CEC-MS utilizing full scan positive ion mode of ESI was employed to study the effect of fragmentor voltage on the in-source collision induced dissociation (IS-CID) of several APEO nonionic surfactants. Finally, in Chapter 7, the preparation and characterization of a novel liquid crystalline stationary phase suitable for separation of neutral and charged compounds in packed column CEC is evaluated.
APA, Harvard, Vancouver, ISO, and other styles
15

Lebdioua, Khaoula. "Etude expérimentale et numérique du comportement en suspension de particules de silice amphotères." Thesis, Limoges, 2019. http://www.theses.fr/2019LIMO0124.

Full text
Abstract:
Cette thèse porte sur la synthèse et l’étude expérimentale et numérique du comportement en suspension des particules de silice amphotères. Elle présente une étude approfondie de la synthèse de ces particules, avec une taille de patch ajustable, par la voie des émulsions de Pickering. Les particules de silice sont partiellement modifiées avec de l’aminopropyltriéthoxysilane (APTES), afin d’obtenir différentes charges de surface en fonction du pH (positive/ négative, neutre / négative ou négative/ négative). Les particules sont fluorescentes pour pouvoir être observées, ainsi que leurs assemblages, par microscopie confocale. Leur comportement à différents pH est également simulé par la dynamique Brownienne, où les interactions sont modélisées par le potentiel DLVO. Les simulations sont comparées aux observations expérimentales, afin de valider ces nouveaux modèles et de mieux comprendre le processus d’agrégation de particules à patch. Un bon accord entre les caractérisations expérimentales et numériques a été obtenu
This study is about the synthesis of amphoteric silica particles and the study of their behaviour in suspension, experimentally and numerically. It presents a thorough study for the synthesis of these particles, with adjustable patch size, using the Pickering emulsion method. Particles are partially modified with aminopropyltriethoxysilane (APTES), in order to obtain different surface charges depending on the pH (positive/negative, neutral/negative or negative/negative). These particles are fluorescent so that they can be observed, as well as their assemblies, by confocal microscopy. Their aggregation at different pH is also studied by means of Brownian dynamics simulations, using the DLVO theory. Simulations are compared to experimental observations, in order to validate these new models, and get a better understanding of the aggregation process of asymmetric particles. A good agreement between experimental and numerical characterizations was obtained
APA, Harvard, Vancouver, ISO, and other styles
16

Akinyemi, Segun Ajayi. "Geochemical and mineralogical evaluation of toxic contaminants mobility in weathered coal fly ash: as a case study, Tutuka dump site, South Africa." Thesis, University of the Western Cape, 2011. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_1226_1360593017.

Full text
Abstract:

The management and disposal of huge volumes of coal combustion by products such as fly ash has constituted a major challenge to the environment. In most cases due to the inadequate alternative use of coal fly ash, the discarded waste is stored in holding ponds, slag heaps, or stock piled in ash dumps. This practice has raised concerns on the prospect of inorganic metals release to the surface and groundwater in the vicinity of the ash dump. Acceptable scientific studies are lacking to determine the best ash disposal practices. Moreover, knowledge about the mobility patterns of inorganic species as a function of mineralogical association or pH susceptibility of the dry disposed ash dump under natural weathering conditions are scarce in the literature. Fundamental understanding of chemical interactions of dry disposed ash with ingressed CO2 from atmosphere, percolating rain water and brine irrigation within ash disposal sites were seen as key areas requiring investigation. The mineralogical association of inorganic species in the dry disposed ash cores can be identified and quantified. This would provide a basis for understanding of chemical weathering, mineralogical transformations or mobility patterns of these inorganic species in the dry ash disposal scenario. The current study therefore aims to provide a comprehensive characterisation of weathered dry disposed ash cores, to reveal mobility patterns of chemical species as a function of depth and age of ash, with a view to assessing the potential environmental impacts. Fifty-nine samples were taken from 3 drilled cores obtained respectively from the 1 year, 8 year and 20-year-old sections of sequentially dumped, 
weathered, dry disposed ash in an ash dump site at Tutuka - a South African coal burning power station. The core samples were characterized using standard analytical procedures viz: X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transforms infrared (FTIR) techniques, Scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) and Acid neutralisation capacity (ANC) test. A modified sequential extraction (SE) method was used in this study. The chemical partitioning, mobility and weathering patterns in 1 year, 8 year and 20-year-old sections of the ash dump were respectively investigated using this modified sequential extraction scheme. The sequence of the extractions was as follows: (1) water soluble, (2) exchangeable, (3) carbonate, (4) iron and manganese and (5) residual. The results obtained from the 5 steps sequential extraction scheme were validated with the total metal content of the original sample using mass balance method. The distribution of major and trace elements in the different liquid fractions obtained after each step of sequential extraction of the 59 drilled core samples was determined by inductively coupled plasma mass spectrometry (ICPMS). The data generated for various ash core samples were explored for the systematic analysis of mineralogical transformation and change in ash chemistry with ageing of the ash. Furthermore, the data was analyzed to reveal the impact of ingressed CO2 from atmosphere, infiltrating rain water and brine irrigation on the chemistry of ash core samples. Major mineral phases in original ash core samples prior to extraction are quartz (SiO2) and mullite (3Al2O3·
2SiO2). Other minor mineral phases identified were hematite (Fe2O3), calcite (CaCO3), lime (CaO), anorthite (CaAl2Si2O8), mica (Ca (Mg, Al)3 (Al3Si) O10 (OH)2), and enstatite (Mg2Si2O6). X-ray diffraction results show significant loss of crystallinity in the older ash cores. The presence of minor phases of calcite and mica in dry disposed ash cores are attributed to reduction in the pore water pH due to hydration, carbonation and pozzolanic reactions. The X-ray diffraction technique was unable to detect Fe-oxyhydroxide phase and morealuminosilicate phases in ash core samples due to their low abundance and amorphous character. X-ray fluorescence results of the original ash core samples showed the presence of major oxides, such as SiO2, Al2O3, Fe2O3, while CaO, K2O, TiO2, Na2O, MnO, MgO, P2O5, and SO3 occur in minor concentrations. The ratio of SiO2/Al2O3 classified the original core samples prior to extraction as a silico-aluminate class F fly ash. The ternary plot of major elements in 1-year-old ash core samples was both sialic and ferrocalsialic but 8 year and 20-year-old ash core samples were sialic in chemical composition. It is noteworthy that the mass % of SiO2 varies through the depth of the core with an increase of nearly 3 %, to 58 mass % of SiO2 at a depth of 6 m in the 1-year-old core whereas in the case of the 8-year-old core a 2 % increase of SiO2 to a level of 57.5 mass % can be observed at levels between 4-8 m, showing dissolution of major components in the matrix of older ash cores.. The Na2O content of the Tutuka ash cores was low and varied between 0.6-1.1 mass % for 1-year-old ash cores to around 0.6-0.8 mass % for 8-year-old ash cores. Sodium levels were higher in 1-year-old ash cores compared to 8 year and 20-year-old ashcores. Observed trends indicate that quick weathering of the ash (within a year) leached out Na+ from the ash dump. No evidence of Na+ encapsulation even though the ash dump was brine irrigated. Thus the dry disposal ash placement method does not result in a sustainable salt sink for Na-containing species over time. The total content of each of the elements in 1 year and 20-year-old ash cores was normalised with their total content in fresh ash from same power station to show enrichment and depletion factor. Major elements such as K+, Mn showed enrichment in 1-year-old ash cores whereas Al, Si, Na+, Ti, Ca, Mg, S and Fe showed depletion due to over time erosion. Trace elements such as Cr, Sr, P, Ba, Pb, V and Zn showed enrichment but Ni, Y, Zr showed depletion attributed to over time erosion. In 20-year-old ash cores, major elements such as Al, Na+ and Mn showed enrichment while Si, K+, Fe, Mg and Ca showed depletion highlighting their mobility. Trends indicated intensive flushing of major soluble components such as buffering constituents (CaO) by percolating rain water. The 1-year-old and 20-year-old coal ash cores showed a lower pH and greater loss/depletion of the soluble buffering constituents than the 2-week-old placed ash, indicating significant chemical weathering within a year. Based 
on ANC results the leaching behaviours of Ca, Mg, Na+, K+, Se, Cr, and Sr were found to be controlled by the pH of the leachant indicating high mobility of major soluble species in the ash cores when in contact with slightly acid rain water. Other investigated toxic metals such as As, Mo and Pb showed amphoteric behaviour with respect to the pH of the leachant. Chemical alterations and formation of transient minor secondary mineral phases was found to have a significant effect on the acid susceptibility and depletion pattern of chemical species in the core ash samples when compared to fresh ash. These ANC results correlated well with the data generated from the sequential extraction scheme. Based on sequential extraction results elements, showed noticeable mobility in the water soluble, exchangeable and carbonate fractions due to adsorption and desorption caused by variations in the pore water pH. In contrast, slight mobility of elements in the Fe and Mn, and residual fractions of dry disposed fly ashes are attributed to the co-precipitation and dissolution of minor amount of less soluble secondary phase overtime. The 1-year-old dry disposed ash cores were the least weathered among the 3 drilled ash cores. Therefore low concentration of toxic metals in older ash cores were ascribed to extensive weathering with slower release from residual mineral phases over time. Elements were found to associate with different mineral phases depending on the age or depth of the core samples showing greater heterogeneity in dispersion. For instance the average amount of total calcium in different mineral associations of 1-year-old ash cores is as follows
water soluble (10.2 %), exchangeable (37.04 %), carbonate (37.9 %), Fe and Mn (7.1 %) and residual (2.97 %). The amount of total Na+ in different mineral phases of 1-year-old ash cores followed this trend: water soluble (21 %), exchangeable (11.26 %), carbonate (2.6 %), Fe and Mn (4.7 %) and residual (53.9 %). The non-leachable portion of the total Na+ content (namely that contained in the residual fraction) in the 1-year-old ash core samples under conditions found in nature ranged between 5-91 %. This non-leachable portion of the Na+ showed the metastability of the mineral phases with which residual Na+ associates. Results showed older ash cores are enriched in toxic elements. Toxic elements such as As, B, Cr, Mo and Pb are enriched in the residual fraction of older ash cores. For instance As concentration in the residual fraction varied between 0.0003- 0.00043 mg kg-1 for 1-year-old ash cores to around 0.0003-0.0015 mg kg-1 for 20-year-old ash cores. This suggests that the older ash is enriched in toxic elements hence dust from the ash dump would be toxic to human health. The knowledge of mobility and ecotoxicological significance of coal fly ash is needed when considering its disposal or reuse in the environment. The mobility and ecotoxicology of inorganic metals in coal fly ash are determined by (i) mineralogical associations of inorganic species (ii) in-homogeneity in the ash dumps (iii) long and short term exposure to ingress CO2 and percolating rain water. Management issues such as inconsistent placement of ash in the dumps, poor choice of ash dump site, in-homogeneity in brine irrigation, no record of salt load put on the ash dumps and lack of proper monitoring requires improvement. The thesis provides justification for the use of the modified sequential extraction scheme as a predictive tool and could be employed in a similar research work. This thesis also proved that the dry ash disposal method was not environmental friendly in terms of overall leaching potential after significant chemical weathering. Moreover the study proved that the practice of brine co-disposal or irrigation on ash dumps is not sustainable as the ash dump did not act as a salt sink.

APA, Harvard, Vancouver, ISO, and other styles
17

Zheng, Yanling. "Polymeres zwitterioniques : synthese, proprietes en solution et en masse." Université Louis Pasteur (Strasbourg) (1971-2008), 1987. http://www.theses.fr/1987STR13092.

Full text
Abstract:
Copolymeres a base d'acrylate d'ethyle et porteurs de groupes lateraux zwitterionique de structure variee, soit par voie radicalaire soit par quaternarisation des precurseurs contenant une amine tertiaire. Complexation d'anion polarisable sur un homopolymere du type sulfopropylbetaine
APA, Harvard, Vancouver, ISO, and other styles
18

Sezaki, Takao. "Colloidal behavior of amphoteric dry strength agents." 2003. http://www.lib.ncsu.edu/theses/available/etd-11242003-160324/unrestricted/etd.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Jung, Chang Chia, and 張家榮. "Synthesis and characterization of amphoteric submicron polymer particles." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/93877120219592856143.

Full text
Abstract:
碩士
國立臺灣科技大學
化學工程系
90
The seed latex particles were prepared by batch soap-free emulsion polymerization. The latex products were then synthetized by semibatch seeded soap-free emulsion polymerization. As a result of different AAP and MAA concentrations in the recipes used, latex particles carrying different charges and displaying pH-sensitivity were obtained. At high pH, the Zeta potential of latex particles (ζ) increases with increasing [MAA]. At low pH , ζ increases with increasing [AAP]. Isothermal adsorption of latex particles with Lysozyme, Pepsin, or Hemoglobin were carried out. When the aqueous solution environment was varied, the properties of the adsorbed latex particles were quite different. At pH = 3, Pepsin adsorbed on the particle surfaces, but Lysozyme could not adsorb on the particle surfaces. At pH = 7, Lysozyme adsorbed on latex particle surfaces (C2-1) by electrostatic interaction, whereas Pepsin adsorbed on latex particle surfaces by hydrophobic interaction. At pH = 9.5, Lysozyme adsorbed on particle surfaces, whereas Pepsin was incapable of adsorbing.
APA, Harvard, Vancouver, ISO, and other styles
20

Chen, Chun-hung, and 陳俊宏. "Interactions between Amphoteric Submicron Polymer Particles and Proteins." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/43486876481867744624.

Full text
Abstract:
碩士
國立臺灣科技大學
化學工程系
93
Amphoteric latex particles were prepared by the surfactant-free emulsion polymerization, with methyl methacrylate (MMA) as the hydrophobic monomer, methacrylic acid (MAA) as the hydrophilic monomer, and V-50 as the cationic initiator. First, the seed latex particles were prepared by the batch surfactant-free emulsion polymerization. Second, the latex products were synthesized by the semibatch seeded surfactant-free emulsion polymerization. These submicron particle surfaces have amino groups and carboxyl groups at the same time. Therefore, they display pH-sensitiy. The particle surfaces have net positive charge, owing to the ionized amino groups at low pH. The particle surfaces have net negatively charge, owing to the ionized carboxyl groups at high pH. Isothermal adsorption of BSA, pepsin or lysozyme on amphoteric latex particles were carried out. Adsorption of proteins onto the particles leads to change in the turbidity, particle size and zeta potential. When amphoteric latex particles and proteins have the opposite net charge, the self-promoting adsorption process may occur due to charge neutralization and this could lead to flocculation. In contrast, electrostatic repulsion forces between amphoteric latex particles and proteins with similar charges play an important role in the colloidal stability. This will then retard the adsorption of protein molecules onto the particle surfaces. Therefore, latex particles exhibit excellent colloidal stability.
APA, Harvard, Vancouver, ISO, and other styles
21

Chiu, Ming-Huan, and 邱茗煥. "Interactions between Amphoteric Submicron Polymer Particles and Binary Proteins." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/v8auza.

Full text
Abstract:
碩士
國立臺灣科技大學
化學工程系
94
The two amphoteric latex particles with their IEP equal 5.2 and 7.1, respectively, from J. H. Chren These latex products was prepared by the surfactant-free emulsion polymerization and composed of methyl methacrylate(MMA)as the hydrophobic monomer, methacrylic acid(MAA) as hydrophilic monomer, and V-50 as cationic initiator. First, isothermal adsorption of BSA or Hemoglobin on latex particles with different IEP values(IEP = 5.2 and IEP = 7.1)were carried out the colloidal properties such as optical density, particle size, and Zeta potential measured in order to investigate the interactions between latex particles and proteins. Maximal optical density and particle size at pI value of BSA and Hemoglobin(BSA pI = 4.7, Hemoglobin pI = 7.0 ), respectively. Isothermal adsorption of binary protein mixture(BSA and lysozyme) on amphoteric latex particles(IEP = 7.1)at different pH values were then investigated. We measured optical density, particle size and zeta potential at the colloidal system in order to gain a better understanding of the interactions between the proteins and amphoteric latex particles.
APA, Harvard, Vancouver, ISO, and other styles
22

He, Zhi. "Synthetic Application of Amphoteric Aziridine Aldehydes and alpha-Boryl Aldehydes." Thesis, 2012. http://hdl.handle.net/1807/34051.

Full text
Abstract:
A range of N-H alkynylaziridines were prepared from amphoteric unprotected aziridine aldehydes without protecting-group manipulation. Unprotected alpha -amino allenes can be obtained from these strained propargyl amines via a 9-BBN mediated hydride transfer. Further transformation of alpha -amino allenes to 2,4,6-trisubstituted pyridines was realized. We also developed another class of amphoteric molecules – alpha-boryl aldehydes, equipped with the tetrahedral MIDA boryl group. A wide range of boryl-substituted building blocks or functionalized boronic acid derivatives have been accessed from these bench-stable alpha-borylcarbonyl compounds. Further chemoselective transformations of these alpha-boryl aldehyde derived building blocks have been conducted, where alph-boryl isocyanates, alpha-aminoboronic acids, acylboronates, and borylated heterocycles were achieved through the decarboxylative functionalization of alpha-borylcarboxylic acids.
APA, Harvard, Vancouver, ISO, and other styles
23

Song, Junlong. "Adsorption of amphoteric and nonionic polymers on model thin films." 2008. http://www.lib.ncsu.edu/theses/available/etd-07252008-112350/unrestricted/etd.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Wang, Yi-Kai, and 王奕凱. "The study of a novel amphoteric composite adsorbent to removemixed dyes." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/hne7tb.

Full text
Abstract:
碩士
國立臺北科技大學
化學工程與生物科技系化學工程碩士班
106
The study of low-cost amphoteric adsorbents to treat wastewater was the current trend due to the different types of pollutants in aqueous solution. Rice bran is a major by-product of the rice milling industry and is abundantin Taiwan. The amphoteric composite adsorbent was synthesized by using rice bran and the new type adsorbent was characterized by FTIR, SEM, BET, and XRD. The adsorption behavior of reactive blue 4 (RB4) and Crystal violet (CV) dyes will be simultaneously analyzed in the mixture using the derivative spectrophotometric (DS) method. The central composite design (CCD) was employed to evaluate the effects that three control factors (temperature, pH and contact time) have on the dyes adsorption capacity (RB4 and CV removal rate) of the adsorbent. Analysis of variance (ANOVA) was used to evaluate the validation of the RSM models and indicated that the quadratic and linear models were highly significant and suitable to represent the response of the RB4 and CV dye adsorption, respectively. The optimum conditions were determined using the Design Expert Program and were determined as follows: temperature 60°C, pH 2.93, and adsorption time 360 minutes. Under the optimum operating conditions, the predicted dye adsorption capacity was close to the experimental value. The adsorption kinetics data followed the pseudo-second-order kinetic model, and the isotherm data fit the Temkin isotherm model well. The regeneration results of the adsorbent show that the adsorbent has a good reusability and can be applied potentially to treat industrial wastewater.
APA, Harvard, Vancouver, ISO, and other styles
25

Umemura, Tomonari, and 知也 梅村. "Studies on Loquid Chromatography Using Reversed-Phase Columns Modified with Amphoteric Surfactants." Thesis, 1999. http://hdl.handle.net/2237/6414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

"Studies on Loquid Chromatography Using Reversed-Phase Columns Modified with Amphoteric Surfactants." Thesis, 1999. http://hdl.handle.net/2237/6414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Liao, Ying-Chen, and 廖盈甄. "Internal parallel hybrid capacitors with an amphoteric material of lithium vanadium phosphate." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/70300360521907758833.

Full text
Abstract:
碩士
國立臺灣科技大學
化學工程系
103
The internal parallel hybrid capacitors assemble with the bi-material electrodes which contain both electrochemical capacitor material and battery materials. In this study, we conduct many electrochemical property measurements on internal parallel hybrid capacitors. We use sol-gel method to synthesis the amphoteric material, Li3V2(PO4)3. The phase of Li3V2(PO4)3 is analyzed with X-ray diffraction, and the structure is correspond to JCPDS 04-016-1666. As the negative electrode, Li3V2(PO4)3 hybrid with activated carbon must be prelithiated before its assembly. We use the end potential of prelithiation process 0.1V vs. Li/Li+ at 0.1Ag-1. Then, we compare the charge/discharge performance of four cells with the LVP+AC/LVP+AC mass ratio, 1:1, 2:1, 3:1, 4:1. The maximum specific energy of the LVP+AC/LVP+AC capacitor is measured with a mass ratio of 1:1 for positive and negative electrodes. At the specific current 0.03 Ag-1, the LVP+AC/LVP+AC capacitor demonstrates 68.4 Whkg-1 in the 4.0 window, and the specific capacitance demonstrates 38.2 Fg-1. The other side, we change the positive electrode and assemble LCO+AC/LVP+AC capacitor with 1:1 mass ratio. At the specific current 0.02 Ag-1, the LCO+AC/LVP+AC capacitor demonstrates 36.8 Whkg-1 in the 3.5 window, and the specific capacitance demonstrates 29.5 Fg-1. When the window increases to 4.0V, the specific energy increases to 70.3 Whkg-1, and the specific capacitance demonstrates 34.3 Fg-1.
APA, Harvard, Vancouver, ISO, and other styles
28

Yuan, Tung-Shuian, and 袁通軒. "Study on the Synthesis and Properties of an Amphoteric Hydrogel/Montmorillonite Composite Material." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/7kbgh3.

Full text
Abstract:
碩士
國立臺灣師範大學
化學系
107
This thesis has prepared two zwitterionic hydrogels,Poly(acrylamide-co-sulfobetaine) (P(AM/SB)) and Poly(acrylamide-co-sulfobetaine)/montmorillonite (P(AM/SB)/MMT) by reactingacrylamide, N-(3-sulfopropyl)-N-methacroyloxyethyl-N,N-dimethyl-ammoniumbetaine(SB)and Montmorillonite through free radical polymerization. FT-IR was used to identify the functional groups of these hydrogels. The effects of monomer ratio, initiator and crosslinker dosage, andmontmorillonite content on the water absorbency of the resulted hydrogelsin various aqueous solutions were studied and discussed. P(AM/SB)/MMT hydrogel was added into cementitious materials. The effects of monomer ratio and Montmorillonite content on the weight loss, compressive strength, internal humidity, autogenous shrinkage and drying shrinkage in mortars, and the cracking index in cement pastes were determined and discussed. The results indicated that the highest water absorbency of all tested P(AM/SB)/MMT hydrogel with AM/SB = 8, APS = 0.5 mol%, MBA = 2.0 mole%, MMT = 10 wt% were 28.3 g/g in water and 54.0 g/g in Pore solution, repectively. P(AM/SB)/MMT hydrogel with 0.2 wt% dosage, particle size of 0.082 mm and 10 wt% Montmorillonite showed the best performance in cementitious materials. Namely, this polymer could decrease autogenous shrinkage and drying shrinkage, and increase the compressive strength and internal humidity in mortars, and reduce the craking formation in cement pastes.
APA, Harvard, Vancouver, ISO, and other styles
29

Lin, Jin-Liang, and 林錦良. "Study on the synthesis and properties of an amphoteric hydrogel/Slag composite material." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/23154835507310387778.

Full text
Abstract:
碩士
國立臺灣師範大學
化學系
104
This thesis has prepared two zwitterionic superabsorbent hydrogels, i.e., Poly(acrylamide-co-sulfobetaine) (P(AM/SB)) and Poly(acrylamide- co-sulfobetaine)/slag (P(AM/SB)/SG). FT-IR was used to identify the functional groups of the hydrogel. The effects of monomer ratio, initiator and crosslinker dosage, and slag content on the water absorbency of the resulted hydrogel in various aqueous solutions were studied and discussed. P(AM/SB) hydrogel was added into cementitious materials. The effects of monomer ratio and Slag content on the weight loss, compressive strength, internal humidity and drying shrinkage in mortars, and the cracking index in cement pastes were determined and discussed. The results indicated that the highest water absorbency of all tested hydrogels were 48.4, 49.3 and 53.9 g/g in water, 0.1M NaCl(aq) and 0.1M CaCl2(aq), repectively. P(AM/SB)/SG hydrogel with 0.2 wt% dosage, particle size of 0.082 mm and 15 wt% Slag showed the best performance in cementitious materials. Namely, this polymer could decrease the weight loss and drying shrinkage, and increase the compressive strength and internal humidity in mortars, and reduce the craking formation in cement pastes. Keywords: zwitterionic, hydrogel, synthesis, slag, mortar, water absorbency, compressive strength, internal humidity, drying shrinkage.
APA, Harvard, Vancouver, ISO, and other styles
30

Bataweel, Mohammed Abdullah. "Enhanced Oil Recovery in High Salinity High Temperature Reservoir by Chemical Flooding." Thesis, 2011. http://hdl.handle.net/1969.1/ETD-TAMU-2011-12-10300.

Full text
Abstract:
Studying chemical enhanced oil recovery (EOR) in a high-temperature/high-salinity (HT/HS) reservoir will help expand the application of chemical EOR to more challenging environments. Until recently, chemical EOR was not recommended at reservoirs that contain high concentrations of divalent cations without the need to recondition the reservoir by flooding it with less saline/ less hardness brines. This strategy was found ineffective in preparing the reservoir for chemical flooding. Surfactants used for chemical flooding operating in high temperatures tend to precipitate when exposed to high concentrations of divalent cations and will partition to the oil phase at high salinities. In this study amphoteric surfactant was used to replace the traditionally used anionic surfactants. Amphoteric surfactants show higher multivalent cations tolerance with better thermal stability. A modified amphoteric surfactant with lower adsorption properties was evaluated for oil recovery. Organic alkali was used to eliminate the water softening process when preparing the chemical solution and reduce potential scale problems caused by precipitation due to incompatibility between chemical slug containing alkali and formation brine. Using organic alkali helped in minimizing softening required when preparing an alkali-surfactant-polymer (ASP) solution using seawater. Solution prepared with organic alkali showed the least injectivity decline when compared to traditional alkalis (NaOH and Na2CO3) and sodium metaborate. Adding organic alkali helped further reduce IFT values when added to surfactant solution. Amphoteric surfactant was found to produce low IFT values at low concentrations and can operate at high salinity / high hardness conditions. When mixed with polymer it improved the viscosity of the surfactant-polymer (SP) solution when prepared in high salinity mixing water (6% NaCl). When prepared in seawater and tested in reservoir temperature (95°C) no reduction in viscosity was found. Unlike the anionic surfactant that causes reduction in viscosity of the SP solution at reservoir temperature. This will not require increasing the polymer concentration in the chemical slug. Unlike the case when anionic surfactant was used and more polymer need to be added to compensate the reduction in viscosity. Berea sandstone cores show lower recovery compared to dolomite cores. It was also found that Berea cores were more sensitive to polymer concentration and type and injectivity decline can be a serious issue during chemical and polymer injection. Dolomite did not show injectivity decline during chemical and polymer flooding and was not sensitive to the polymer concentration when a polymer with low molecular weight was used. CT scan was employed to study the displacement of oil during ASP, SP, polymer and surfactant flooding. The formation and propagation oil bank was observed during these core flood experiments. ASP and SP flooding showed the highest recovery, and formation and propagation of oil bank was clearer in these experiments compared to surfactant flooding. It was found that in Berea sandstone with a permeability range of 50 to 80 md that the recovery and fluid flow was through some dominating and some smaller channels. This explained the deviation from piston-like displacement, where a sharp change in saturation in part of the flood related to the dominated channels and tapered front with late arrival when oil is recovered from the smaller channels. It was concluded that the recovery in the case of sandstone was dominated by the fluid flow and chemical propagation in the porous media not by the effectiveness of the chemical slug to lower the IFT between the displacing fluid and oil.
APA, Harvard, Vancouver, ISO, and other styles
31

Kuo, Jen-Huang, and 郭仁皇. "Nucleophilic Acyl Substitutions of Anhydrides and Esters eith Protic Nucleophiles Catalyzed by Water Tolerent, Amphoteric, Oxometallic Species." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/13485619501425102313.

Full text
Abstract:
博士
國立臺灣師範大學
化學研究所
92
英文摘要 Among twenty-four different oxo-metallic species examined, vanadyl triflate, dioxomolybdenum dichloride and oxomolybdenum tetrachloride were the most efficient catalysts to facilitate nucleophilic acyl substitution (NAS) of anhydrides with a myriad array of alcohols, amines, and thiols in high yields and high chemoselectivity. The catalytic NAS tolerates virtually all kinds of functional groups and was unprecedented in view of the well-recognized redox chemical behaviors associated with oxomolybdenum (VI) species. By using benzoic anhydride as a mediator for in-situ generation of an incipient mixed-anhydride with a given functional alkanoic acid, one can achieve oleate, dipeptide, diphenylmethyl, N-Fmoc-α-amino, pyruvic, and tert-butylthio ester, N-tert-butylamide and trityl acrylate syntheses with appropriate protic nucleophiles. Similar to vanadyl species, the amphoteric character of the Mo=O unit in oxomolybdenum chlorides was proven by 1H NMR kinetic experiments to be responsible for the catalytic NAS profile.
APA, Harvard, Vancouver, ISO, and other styles
32

Chang, Wan-Chen, and 張婉珍. "Synthesis of AA/DMC amphoteric polyelectrolyte block copolymer and its application to the dispersion of CMP silicon oxide." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/be7hzv.

Full text
Abstract:
碩士
國立臺北科技大學
資源工程研究所
100
A series of amphoteric polyelectrolyte block copolymers with different molecular cationic and anionic segment ratio were prepared by the radical copolymerization of acrylic acid (AA) as anionic monomer with methacryloxyethyltrimethyl ammonium chloride (DMC) as cationic monomer. By adjusting the ratio of anionic and cationic monomers, the synthesized amphoteric polyelectrolyte had different The result showed that when particle dispersion was applied in different dissociation, the amphoteric polyelectrolyte had different anionic-group/ cationic group content. The structures and properties of the amphoteric polyelectrolyte were confirmed by FTIR、IC、AA、NMR、GPC. Then, the amphoteric polyelectrolyte was used by using for the disperse dispersion of SiO2 particles of in acid or basic in solution. For silicon wafer CMP application (pH=10), the SiO2 particles can be dispersed by the addition of optima amount of polyelectrolyte (AA:DMC=1:4), (AA:DMC=2:3), (AA:DMC=3:2) and (AA:DMC=4:1) in 12wt%、14wt%、10wt% and 14wt%, respectively. The amount of added polyelectrolyte was significantly lower than that of conventional surfactant. At pH=10, it was found that the stability of SiO2 particles increased with increasing anionic-group content. In the acid conditions (pH=3), the SiO2 particles can be dispersed by the addition of optima amount of polyelectrolyte (AA:DMC=1:4), (AA:DMC=2:3), (AA:DMC=3:2) and (AA:DMC=4:1) in 1.7wt%、2.5wt%、2.6wt%及1.9wt%, respectively. At pH 10, it was found that the stability of SiO2 particles increased with increasing cationic-group content.
APA, Harvard, Vancouver, ISO, and other styles
33

Hili, Ryan Matthew. "Unprotected Amino Aldehydes in Organic Synthesis." Thesis, 2010. http://hdl.handle.net/1807/26458.

Full text
Abstract:
In 1908, H. Emil Fisher attempted to prepare glycinal, an unprotected amino aldehyde, which he found to be inherently unstable and prone to polymerization. This instability arises from the propensity of amines to condense with aldehydes. Accordingly, amino aldehydes require protection of the amine functional group. On the contrary, aziridines do not condense with aldehydes; the aziridine ring-strain precludes the formation of an iminium ion. Predicated upon this orthogonal reactivity, a stable class of unprotected amino aldehydes has been prepared, and an in-depth investigation into their chemical reactivity has been undertaken. Reactions designed to utilize both their nucleophilic (amine) and electrophilic (aldehyde) centres have demonstrated their capacity to forge multiple bonds in a single transformation, and have been implemented in the synthesis of complex heterocycles and cyclic peptides.
APA, Harvard, Vancouver, ISO, and other styles
34

Akinyemi, Segun Ajayi. "Geochemical and mineralogical evaluation of toxic contaminants mobility in weathered coal fly ash : as a case study, Tutuka dumpsite, South Africa." Thesis, 2011. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_6004_1325666445.

Full text
Abstract:
The current study therefore aims to provide a comprehensive characterisation of weathered dry disposed ash cores, to reveal mobility patterns of chemical species as a function of depth and age of ash, with a view to assessing the potential environmental impacts. Fifty-nine samples were taken from 3 drilled cores obtained respectively from the 1 year, 8 year and 20-year-old sections of sequentially dumped, weathered, dry disposed ash in an ash dump site at Tutuka - a South African coal burning power station.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography