Relevant bibliographies by topics / Analog Devices

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Analog Devices'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Analog Devices.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Analog Devices"

1

Taggart, Robert, and Louis Corsini. "Analog Devices, Inc." Journal of Business Research 58, no. 7 (July 2005): 967–80. http://dx.doi.org/10.1016/j.jbusres.2003.12.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Ning, Hsinyu Tsai, Vijay Narayanan, and Malte Rasch. "Impact of analog memory device failure on in-memory computing inference accuracy." APL Machine Learning 1, no. 1 (March 1, 2023): 016104. http://dx.doi.org/10.1063/5.0131797.

Full text
Abstract:
In-memory computing using analog non-volatile memory (NVM) devices can improve the speed and reduce the latency of deep neural network (DNN) inference. It has been recently shown that neuromorphic crossbar arrays, where each weight is implemented using analog conductance values of phase-change memory devices, achieve competitive accuracy and high power efficiency. However, due to the large amount of NVMs needed and the challenge for making analog NVM devices, these chips typically include some failed devices from fabrication or developed over time. We study the impact of these failed devices on the analog in-memory computing accuracy for various networks. We show that larger networks with fewer reused layers are more tolerable to failed devices. Devices stuck at high resistance states are more tolerable than devices stuck at low resistance states. To improve the robustness of DNNs to defective devices, we develop training methods that add noise and corrupt devices in the weight matrices during network training and show that this can increase the network accuracy in the presence of the failed devices. We also provide estimated maximum defective device tolerance of some common networks.
APA, Harvard, Vancouver, ISO, and other styles
3

Rodríguez-Montañ, R., D. Muñoz, L. Balado, and J. Figueras. "Analog Switches in Programmable Analog Devices: Quiescent Defective Behaviours." Journal of Electronic Testing 20, no. 2 (April 2004): 143–53. http://dx.doi.org/10.1023/b:jett.0000023678.30564.66.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Withers, R. S., and R. W. Ralston. "Superconductive analog signal processing devices." Proceedings of the IEEE 77, no. 8 (1989): 1247–63. http://dx.doi.org/10.1109/5.34123.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Bo, and Guoyong Shi. "A Native SPICE Implementation of Memristor Models for Simulation of Neuromorphic Analog Signal Processing Circuits." ACM Transactions on Design Automation of Electronic Systems 27, no. 1 (January 31, 2022): 1–24. http://dx.doi.org/10.1145/3474364.

Full text
Abstract:
Since the memristor emerged as a programmable analog storage device, it has stimulated research on the design of analog/mixed-signal circuits with the memristor as the enabler of in-memory computation. Due to the difficulty in evaluating the circuit-level nonidealities of both memristors and CMOS devices, SPICE-accuracy simulation tools are necessary for perfecting the art of neuromorphic analog/mixed-signal circuit design. This article is dedicated to a native SPICE implementation of the memristor device models published in the open literature and develops case studies of applying such a circuit simulation with MOSFET models to study how device-level imperfections can make adversarial effects on the analog circuits that implement neuromorphic analog signal processing. Methods on memristor stamping in the framework of modified nodal analysis formulation are presented, and implementation results are reported. Furthermore, functional simulations on neuromorphic signal processing circuits including memristors and CMOS devices are carried out to validate the effectiveness of the native SPICE implementation of memristor models from the perspectives of simulation accuracy, efficiency, and convergence for large-scale simulation tasks.
APA, Harvard, Vancouver, ISO, and other styles
6

Kushwah, Ravindra Singh, and Shyam Akashe. "FinFET Based Tunable Analog Circuit: Design and Analysis at 45 nm Technology." Chinese Journal of Engineering 2013 (October 24, 2013): 1–8. http://dx.doi.org/10.1155/2013/165945.

Full text
Abstract:
We included a designing of low power tunable analog circuits built using independently driven FinFETs devices, where the controlling of the back gate provide the output on the front gate. We show that this could be an effective solution to conveniently tune the output of bulk CMOS analog circuits particularly for Schmitt trigger and operational transconductance amplifier circuits. FinFET devices can be used to increase the performance by reducing the leakage current and power dissipation, because front and back gates both are independently controlled. FinFET device has a higher controllability, resulting relatively high Ion/Ioff ratio. In this paper, we proposed a tunable analog circuit such as CMOS amplifier circuit, Schmitt trigger circuit, and operational transconductance amplifier circuit, these circuit blocks are necessary for low noise high performance ICs for analog applications. Gain, phase, group delay, and output response of analog tunable circuits have been discussed in this paper. The proposed FinFET based analog tunable circuits have been designed using Cadence Virtuoso tool at 45 nm.
APA, Harvard, Vancouver, ISO, and other styles
7

Montoya, Jorge William. "From Analog Objects to Digital Devices." Philosophy Today 63, no. 3 (2019): 717–30. http://dx.doi.org/10.5840/philtoday2019115291.

Full text
Abstract:
This article intends to establish a comparison between technical analog objects—which were the objects of the epoch when the French philosopher Gilbert Simondon elaborated his philosophical reflection—and digital devices that emerged in the last few decades of the 1900s. First, I define the main features of Simondon’s technical objects in order to understand what the necessary conditions are for there to be technical progress, which is based on what he called the process of concretization. Then, I analyze the relationship between digital objects—as understood by Yuk Hui—and digital devices that take over from analog objects, without necessarily presenting continuity in an evolutionary process. Finally, I intend to expose the role that both analog objects and digital devices play as mediators with the world in a digital era, and to address the question of technical culture nowadays.
APA, Harvard, Vancouver, ISO, and other styles
8

Wu, P. B. "Analog Circuits and Devices [Book Review]." IEEE Circuits and Devices Magazine 21, no. 5 (September 2005): 24. http://dx.doi.org/10.1109/mcd.2005.1517387.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Miller, D. A. B. "Novel analog self-electrooptic-effect devices." IEEE Journal of Quantum Electronics 29, no. 2 (1993): 678–98. http://dx.doi.org/10.1109/3.199322.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tyler, Neil. "Analog Devices and First Sensor Collaborate." New Electronics 52, no. 13 (July 9, 2019): 9. http://dx.doi.org/10.12968/s0047-9624(22)61559-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Analog Devices"

1

Neugebauer, Charles F. Yariv Amnon Yariv Amnon. "Parallel analog computation with charge coupled devices /." Diss., Pasadena, Calif. : California Institute of Technology, 1993. http://resolver.caltech.edu/CaltechETD:etd-08312007-094832.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Liesk, André. "Porting eCos to the Analog Devices BLACKfin DSP." Master's thesis, Universitätsbibliothek Chemnitz, 2006. http://nbn-resolving.de/urn:nbn:de:swb:ch1-200602009.

Full text
Abstract:
This thesis covers the work to combine the two worlds of the hardware platform of the BLACKfin by Analog Devices and the software based on the eCos operating system to provide a foundation for embedded real-time applications to build on to benefit from the best aspects of both. This document will therefore outline the main objectives of this thesis followed by an overview of the functionality provided by eCos and the BLACKfin. It will further outline the steps required to combine both by porting the hardware abstraction layer and device drivers for the BLACKfin architecture to eCos. Prior to detailing selected implementations of particular code segments of special interest this thesis will outline the design and concept considerations involved and the conclusion drawn in order to provide a working HAL. After describing the current state of the hardware abstraction layer port conducted as part of this thesis this document will provide an evaluation of the implementation itself the benefits as well as possible limitations. To provide a conclusion to the work outlined in this document further possible questions of interest for future work based on the results of this thesis will be provided.
APA, Harvard, Vancouver, ISO, and other styles
3

Pansare, Manoj M. "Modeling and simulation of analog devices using PRECISE." Thesis, Virginia Tech, 1988. http://hdl.handle.net/10919/43263.

Full text
Abstract:
The design and development of computer models to simulate analog devices and their effects on circuit applications has been investigated at length. The focus of this research is the development of theoretical and computer models for discrete devices using the popular simulator PRECISE, PRogram for Evaluating Circuits in an Interactive Simulation Environment [3], using a new method for model construction. This new method develops a model approximating the mathematics of the simulation via perturbations and iterations [19]. The models developed by the new method in each case yield a minimum simulation accuracy of 90 percent in circuit applications. In comparison, models developed by the conventional method, which uses measured data to complete physical constructs of SPICE 2G.6 [5], offer a lower accuracy for the same circuits. Hence, the new method is more effective than the old method and also much faster, since the model generation process is now automated and does not require time-consuming manual measurements and calculations spread out over a long period of time. With further development, a computer model can also be developed for the theoretical model presented in this thesis for the Gallium Arsenide Metal Semiconductor Field Effect Transistor (GaAs MESFET) device using the same methodology that has been used to develop the computer model for the Bipolar Junction Transistor (BUT) device. Hence this research, in addition to developing a library of a hundred and fifty odd successful models in the PRECISE and SPICE formats for the diode and BUT, can also be used to develop a new model for the GaAs MESFET, which would make both PRECISE and SPICE easier and more user friendly as circuit simulators.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
4

Mohdzaini, Jefri 1976. "The characterization of the Analog Devices Inc. (ADI) magnetometer." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/86535.

Full text
Abstract:
Thesis (M.Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2000.
Includes bibliographical references (leaves 45-46).
by Jefri Mohdzaini.
M.Eng.
APA, Harvard, Vancouver, ISO, and other styles
5

Lee, Frank 1975. "Physical manifestation of NP-completeness in analog computer devices." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80096.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Song, Jinxin. "Ultra low power Analog-to-Digital Converter for Biomedical Devices." Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-44790.

Full text
Abstract:
The biomedical devices often operate only with a battery, e.g., blood glucose monitor, pacemaker. Therefore, it is desirable to fully utilize the energy without sacrificing the performance of the system. The Analog-to-Digital Converter (ADC), as a key component of most of the biomedical devices, needs to be designed for minimum power consumption by exploring various techniques from system level to circuit level. In addition, the nature of bio-signal provides more alternatives to reduce the power. In this thesis work, an 8 bit 11 kS/s modified algorithmic analog-to-digital converter for biomedical applications is proposed. All analog components are designed at circuit level using a 90 nm CMOS technology and digital components are implemented using Verilog-A language in Cadence. The ADC is operating in current mode at sub-threshold region with only 0.5 V supply voltage with an input current from 0 nA to 512 nA. The ADC is designed based on a top-down design with bottom-up verification approach. The system level model is described using top level language and then the circuit level is created and verified using Cadence tools according to the system level model. The INL and DNL obtained from simulation is -1/+0.8 LSB and -0.9/+1 LSB respectively. The SNDR is 47 dB (7.5 ENOB) for a -0.2 dBFS at 1 kHz sinusoidal signal. The power consumption is 2.83 μW without biasing and 4μW with biasing.
APA, Harvard, Vancouver, ISO, and other styles
7

Yoon, Kwang Sub. "A precision analog small-signal model for submicron MOSFET devices." Diss., Georgia Institute of Technology, 1990. http://hdl.handle.net/1853/14935.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Killens, Jacob. "Utilizing standard CMOS process floating gate devices for analog design." Master's thesis, Mississippi State : Mississippi State University, 2001. http://library.msstate.edu/etd/show.asp?etd=etd-04092001-110957.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Daggett, Josephine Anne. "Theoretical investigation of carbon nanotube devices for millimeter/submillimeter wave analog circuits." Thesis, Montana State University, 2009. http://etd.lib.montana.edu/etd/2009/daggett/DaggettJ1209.pdf.

Full text
Abstract:
Carbon nanotubes have become a very exciting area of research in the field of nanoelectronics in the past few years. Diodes and transistors fabricated using carbon nanotubes are theoretically very promising. Although, experimentally these devices are challenging to successfully realize it is hoped that further research and improvements in fabrication procedures will yield devices which could match or surpass current CMOS technologies. However, there are still many areas that need to be improved before anyone sees these devices mass produced commercially. This thesis gives a detailed overview of the fundamentals of these devices which can be easily understood by someone with a typical electrical engineering background. The purpose of this thesis is to investigate both the theory behind these devices and to conduct a series of simulations in order to determine how they compare to ultimately scaled CMOS for high frequency applications by ignoring the challenges associated with fabricating these devices reliably. In other words, at best how could these devices perform if they could be mass produced with high yield compared to current technologies? First an introduction to carbon nanotubes and a review of relevant concepts from solid-state electronics will be given, followed by a brief overview of quantum theory for 1-D systems as it pertains to nanotube based electronics. This will then be used to develop models for a Schottky diode and Schottky barrier transistor. Simulations using these models were conducted that show the potential for these devices for high frequency electronics. These results are subsequently used to compare to current state-of-the-art technologies. Upon completion of the simulations in this thesis, it was determined that carbon nanotube based Schottky diodes and Schottky barrier transistors do not perform as well as current technologies in relation to applications for submillimeter/millimeter wave detection and analog circuits, even when assuming no limitations imposed due to poor fabrication.
APA, Harvard, Vancouver, ISO, and other styles
10

Gurary, Jonathan Gurary. "Improving the Security of Mobile Devices Through Multi-Dimensional and Analog Authentication." Cleveland State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=csu1521564381685222.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Analog Devices"

1

Bobyr', Maksim, Vitaliy Titov, and Vladimir Ivanov. Design of analog and digital devices. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1070341.

Full text
Abstract:
The textbook contains the material necessary for the formation of students ' knowledge of the basics of analog and digital circuitry and the principles of building digital nodes, instilling skills in the development and design of digital devices, as well as performing practical work and a course project in the discipline "electrical Engineering, electronics and circuit engineering". Methods of calculation of analog circuits and synthesis of discrete devices of combinational type and automata with memory are considered. Examples of calculation of analog circuits and implementation of digital devices for various purposes on integrated circuits are given. Meets the requirements of Federal state educational standards of higher education of the latest generation. For students of higher education institutions studying in the field of training 09.03.01 "computer Science and engineering". It can be useful for students of the areas of training "Design and technology of electronic means", "Biotechnical systems and technologies"and" Information security".
APA, Harvard, Vancouver, ISO, and other styles
2

Williams, Gerald Earl. Analog electronics: Devices, circuits, and techniques. Minneapolis/St. Paul: West Publishing, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rybin, Yu K. Electronic Devices for Analog Signal Processing. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-2205-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

McMenamin, J. Michael. Applied electronic devices and analog ICs. Albany, NY: Delmar Publishers, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gao, Weinan. Analog trimming using floating gate devices. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Williams, Gerald Earl. Analog electronics: Devices, circuits, and techniques. Minneapolis/St. Paul: West Pub. Co., 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mixed analog-digital VLSI devices and technology. Singapore: World Scientific, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mixed analog/digital VLSI devices and technology. New York: McGraw-Hill, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shoop, Barry L. Photonic Analog-to-Digital Conversion. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kino, Gordon S. Acoustic waves: Devices, imaging, and analog signal processing. Englewood Cliffs, N.J: Prentice-Hall, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Analog Devices"

1

Goodge, Malcolm. "Electronic Devices and Components." In Analog Electronics, 20–52. London: Palgrave Macmillan UK, 1990. http://dx.doi.org/10.1007/978-1-349-20994-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Martino, Marcio Dalla Valle, Paula Ghedini Der Agopian, Joao Antonio Martino, Eddy Simoen, and Cor Claeys. "TFETs for Analog Applications." In Nanoscale Devices, 127–58. Boca Raton : Taylor & Francis, a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the academic division of T&F Informa, plc, 2019.: CRC Press, 2018. http://dx.doi.org/10.1201/9781315163116-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Singh, Rajesh, Anita Gehlot, Bhupendra Singh, and Sushabhan Choudhury. "Arduino and Analog Devices." In Arduino-Based Embedded Systems, 75–108. Boca Raton : Taylor & Francis, CRC Press, 2018.: CRC Press, 2017. http://dx.doi.org/10.1201/9781315162881-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Greeneich, Edwin W. "Models for Integrated-Circuit Devices." In Analog Integrated Circuits, 1–48. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6033-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lakshmaiah, Dayaydi, C. B. Ramarao, and K. Kishan Rao. "Switching Characteristics of Devices." In Analog and Pulse Circuits, 72–85. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003274582-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Oates, Daniel E. "Analog Devices in Military Systems." In Microwave Superconductivity, 305–35. Dordrecht: Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-010-0450-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rigby, Graham. "MOS devices and circuits." In Adaptive Analog VLSI Neural Systems, 17–56. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-011-0525-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

van der Horst, Marcel J., Wouter A. Serdijn, and André C. Linnenbank. "Modelling of Active Devices." In Analog Circuits and Signal Processing, 61–103. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00593-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Singh, Jeetendra, and Balwinder Raj. "Evaluation of Nanoscale Memristor Device for Analog and Digital Application." In Nanoscale Devices, 393–423. Boca Raton : Taylor & Francis, a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the academic division of T&F Informa, plc, 2019.: CRC Press, 2018. http://dx.doi.org/10.1201/9781315163116-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Deferm, Noël, and Patrick Reynaert. "Passive Devices: Simulation and Design." In Analog Circuits and Signal Processing, 33–78. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-13951-7_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Analog Devices"

1

Brown, D., S. Chu, M. Kim, B. Gorowitz, M. Milkovic, T. Nakagawa, and T. Vogelsong. "Advanced analog CMOS technology." In 1985 International Electron Devices Meeting. IRE, 1985. http://dx.doi.org/10.1109/iedm.1985.190946.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Furukawa, Rei, Keiji Uehara, Satoshi Takahashi, Nobuhiro Ohtsu, and Yasuhiro Koike. "Fiber optic transmission of analog signals." In Photonic Devices + Applications, edited by Jean-Michel Nunzi. SPIE, 2007. http://dx.doi.org/10.1117/12.734030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mazumder, Annesha, Arka Guha, Suryasish Dey, Yash Mittal, Mousiki Kar, and Atanu Kundu. "UDGMOSFET based analog circuit blocks in cadence virtuoso." In 2017 Devices for Integrated Circuit (DevIC). IEEE, 2017. http://dx.doi.org/10.1109/devic.2017.8073971.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baral, Biswajit, Sudhansu Mohan Biswal, Sanjit Swain, Satish Kumar Das, Debasish Nayak, and Dhananjaya Tripathy. "RF/Analog & Linearity performance analysis of a downscaled JL DG MOSFET on GaAs substrate for Analog/mixed signal SOC applications." In 2019 Devices for Integrated Circuit (DevIC). IEEE, 2019. http://dx.doi.org/10.1109/devic.2019.8783341.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"SESSION 10 - Analog/RF Devices I." In Digest of Technical Papers. 2004 Symposium on VLSI Technology, 2004. IEEE, 2004. http://dx.doi.org/10.1109/vlsit.2004.1345413.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"SESSION 21- Analog/RF Devices II." In Digest of Technical Papers. 2004 Symposium on VLSI Technology, 2004. IEEE, 2004. http://dx.doi.org/10.1109/vlsit.2004.1345488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yadav, Atul Kumar, and Abhishek Acharya. "Investigation of III-V Tunnel FETs for Analog Circuit Design." In 2021 Devices for Integrated Circuit (DevIC). IEEE, 2021. http://dx.doi.org/10.1109/devic50843.2021.9455904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vertregt, Maarten. "The analog challenge of nanometer CMOS." In 2006 International Electron Devices Meeting. IEEE, 2006. http://dx.doi.org/10.1109/iedm.2006.346834.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Brown, Daniel M., David R. Brown, and Jeremiah D. Brown. "High-performance analog profile diffractive systems." In Optoelectronics '99 - Integrated Optoelectronic Devices, edited by Ivan Cindrich, Sing H. Lee, and Richard L. Sutherland. SPIE, 1999. http://dx.doi.org/10.1117/12.349340.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Ming. "Recent Progress in Analog Optical Signal Processing." In Optoelectronic Devices and Integration. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/oedi.2014.oth2a.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Analog Devices"

1

Hardcastle, S. G., M G Grenier, and K. C. Butler. Electronic vane anemometry - finding a suitable replacement of mechanical analog devices for mine airflow assessment. Natural Resources Canada/CMSS/Information Management, 1991. http://dx.doi.org/10.4095/328606.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aimone, James, Christopher Bennett, Suma Cardwell, Ryan Dellana, and Tianyao Xiao. Mosaic The Best of Both Worlds: Analog devices with Digital Spiking Communication to build a Hybrid Neural Network Accelerator. Office of Scientific and Technical Information (OSTI), September 2020. http://dx.doi.org/10.2172/1673175.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Seaman, B. T., M. Kraemer, D. Z. Anderson, and M. J. Holland. Atomtronics: Ultracold Atom Analogs of Electronic Devices. Fort Belvoir, VA: Defense Technical Information Center, June 2006. http://dx.doi.org/10.21236/ada467798.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Brotman, Susan. The Evaluation of Device Model Dependence in the Design of a High-Frequency, Analog, CMOS Transconductance-C Filter. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.6585.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ukiwe and McDonnell. L52362 Assessing the Performance of Above Ground Coating Evaluation Surveys. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), November 2012. http://dx.doi.org/10.55274/r0010686.

Full text
Abstract:
The primary application area for above ground coating evaluation (AGCES) methods is for unpiggable pipelines. For several reasons, however, AGCES methods are not necessarily limited along these narrow lines. For instance, most ILI tools are incapable of identifying external corrosion (which resulted from coating damage overtime) until the wall loss damage has reached the measurable detection threshold of the ILI tool. Thus, even for piggable pipelines, AGCES methods still come in handy for pipeline integrity. In fact, the most proactive approach for pipeline corrosion integrity management for the future will include complementary surveys, such as ECDA and ICDA, all super-imposed and integrated on a common GIS framework for comparative and comprehensive data analysis. Within the pipeline industry there exist divergent views about the AGCES methods, their principles of operation, and limitations. An important defining point about AGCES methods is simple this: they are indirect inspection methods for identifying and classifying external coating damage; they are not - and should not be - tied to the functionalities of any specific proprietary tools or hardware manufactures. The second statement requires further qualification. Confusion is often created among users of AGCES methods when the names of certain coating survey tool are interchanged with the specific survey methods in question. For instance, company A manufactures a device C for detecting coating anomalies. The tendency within the industry is to call the coating survey method such names as "C Survey" or "C Coating Survey". The problem created in this instance is to limit AGCES methods to what device C can capture; the quality of the data become handicapped by that of device C. Industry standards have been created to avoid the fore-going pitfalls. Hence, rather than limit survey methods to the specifications of a given proprietary tool, attempts should be made to manufacture and design tools to meet industry standards. The result will be uniformity of methodology, the only distinctions being speed of data acquisition, methods of data analysis, and possibly, other subtle differences in technological advancements. Included in this distinction is the use of analog versus digital data acquisition methods. Of course, all that has been described so far assumes that the industry standards referenced captures all the details of an effective coating evaluation survey method, including known and even perceived limitations.
APA, Harvard, Vancouver, ISO, and other styles
6

Kanivets, Oleksandr V., Irina М. Kanivets, Natalia V. Kononets, Tetyana М. Gorda, and Ekaterina O. Shmeltser. Development of mobile applications of augmented reality for projects with projection drawings. [б. в.], February 2020. http://dx.doi.org/10.31812/123456789/3745.

Full text
Abstract:
We conducted an analysis of the learning aids used in the study of general technical disciplines. This allowed us to draw an analogy between physical and virtual models and justify the development of a mobile application to perform tasks on a projection drawing. They showed a technique for creating mobile applications for augmented reality. The main stages of the development of an augmented reality application are shown: the development of virtual models, the establishment of the Unity3D game engine, the development of a mobile application, testing and demonstration of work. Particular attention is paid to the use of scripts to rotate and move virtual models. The in-house development of the augmented reality mobile application for accomplishing tasks on a projection drawing is presented. The created mobile application reads, recognizes marker drawings and displays the virtual model of the product on the screen of the mobile device. It has been established that the augmented reality program developed by the team of authors as a mobile pedagogical software can be used to perform tasks both with independent work of students and with the organization of classroom activities in higher education institutions.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Analog Devices' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography