Relevant bibliographies by topics / And SLM technologies

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'And SLM technologies'

Author: Grafiati
Published: 4 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'And SLM technologies.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "And SLM technologies"

1

Ewunetu, Alelgn, Belay Simane, Ermias Teferi, and Benjamin F. F. Zaitchik. "Relationships and the Determinants of Sustainable Land Management Technologies in North Gojjam Sub-Basin, Upper Blue Nile, Ethiopia." Sustainability 13, no. 11 (2021): 6365. http://dx.doi.org/10.3390/su13116365.

Full text
Abstract:
Sustainable land management (SLM) is a leading policy issue in Ethiopia. However, the adoption and continuous use of SLM technologies remain low. This study investigates the interrelationship of adopted SLM technologies and key factors of farmers’ decisions to use SLM technologies in the North Gojjam sub-basin of the Upper Blue Nile. The study was based on the investigation of cross-sectional data obtained from 414 randomly selected rural household heads, focus group discussions, and key informant interviews. Descriptive statistics and Econometric models (i.e., Multivariate Probit and Poisson
APA, Harvard, Vancouver, ISO, and other styles
2

Schwilch, G., F. Bachmann, and J. de Graaff. "Decision support for selecting SLM technologies with stakeholders." Applied Geography 34 (May 2012): 86–98. http://dx.doi.org/10.1016/j.apgeog.2011.11.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Xuanpu, Zhihan Wang, Shi Liu, et al. "Development of Single-Longitudinal-Mode Selection Technology for Solid-State Lasers." International Journal of Optics 2021 (July 28, 2021): 1–13. http://dx.doi.org/10.1155/2021/6667015.

Full text
Abstract:
Lasers with narrow linewidths and single frequencies are widely used in fields such as radar detection, nonlinear optics, and precision measurements. The demand for such lasers has promoted the rapid development of single-longitudinal-mode (SLM) selection technology. Here, we highlight the working principles of current mainstream SLM selection technologies and the recent advances in the field. We compare the characteristics of different SLM selection methods and list the challenges faced by these technologies.
APA, Harvard, Vancouver, ISO, and other styles
4

Kostevsek, Urska, Tomaz Brajlih, Joze Balic, Žiga Kadivnik, and Igor Drstvensek. "Development of productivity estimation model for mass-customized production by selective laser melting." Rapid Prototyping Journal 24, no. 3 (2018): 670–76. http://dx.doi.org/10.1108/rpj-06-2017-0120.

Full text
Abstract:
Purpose Fixed structures in prosthetic dentistry are highly customized products, manufactured individually for patients who have missing teeth. When choosing the technology for fixed dental structure manufacturing, three viable options are available (precise casting, milling and selective laser melting [SLM]). All these technologies can be used to produce a dental structure from CoCr alloy. Besides materials and availability of technologies, economic efficiency is an important factor when choosing a production method. The purpose of this study is to develop an estimation model for achievable p
APA, Harvard, Vancouver, ISO, and other styles
5

Merkt, Simon, Christian Hinke, Henrich Schleifenbaum, and Holger Voswinckel. "Integrative Technology Evaluation Model (ITEM) for Selective Laser Melting (SLM)." Advanced Materials Research 337 (September 2011): 274–80. http://dx.doi.org/10.4028/www.scientific.net/amr.337.274.

Full text
Abstract:
This paper focuses on the evaluation of manufacturing processes that are competing with Selective Laser Melting (SLM). In 3D-part production of serial parts SLM is starting to be an economic choice for manufacturing. An integrated technology evaluation model (ITEM) is presented that helps decision makers to determine the potential of SLM while comparing with conventional manufacturing technologies. In contrast to conventional evaluation methodologies the ITEM considers interactions between product and process innovations generated by SLM. The paper closes with a technical and economical evalua
APA, Harvard, Vancouver, ISO, and other styles
6

Salau, Shehu, Robiu Aliu, and Nofiu Nofiu. "The effect of sustainable land management technologies on farming household food security in Kwara state, Nigeria." Journal of Agricultural Sciences, Belgrade 64, no. 2 (2019): 203–14. http://dx.doi.org/10.2298/jas1902203s.

Full text
Abstract:
Nigeria is among countries of the world confronted with the food insecurity problem. The agricultural production systems that produce food for the teeming population are not sustainable. Consequently, the use of Sustainable Land Management (SLM) technologies becomes a viable option. This study assessed the effect of SLM technologies on farming households? food security in Kwara State, Nigeria. A random sampling technique was used to pick 200 farming households for this study. The analytical tools included descriptive statistics, Shriar index, Likert scale, food security index and logistic regr
APA, Harvard, Vancouver, ISO, and other styles
7

Aurich, J. C., and M. Burkhart. "Qualität steigern mit Selective Laser Melting/Quality improvement with selective laser melting – An approach to manage requirements with additive manufacturing." wt Werkstattstechnik online 105, no. 11-12 (2015): 793–97. http://dx.doi.org/10.37544/1436-4980-2015-11-12-33.

Full text
Abstract:
Additive Manufacturing (AM) ist der Überbegriff für unterschiedliche Fertigungsverfahren, welche durch das schichtweise Aufbringen von Werkstoff die Herstellung von Bauteilen ermöglichen. Selective Laser Melting (SLM) ist ein additives Fertigungsverfahren zur Herstellung von Produkten mit hoher Detailgenauigkeit und Designfreiheit. Der Fachbeitrag stellt ein Konzept vor, bei dem durch systematisches Vorgehen untersucht wird, ob Produktanforderungen mit SLM besser erfüllt werden können als mit konventionellen Fertigungsverfahren.   Additive Manufacturing (AM) is the term for various ma
APA, Harvard, Vancouver, ISO, and other styles
8

Löber, Lukas, Christoph Flache, Romy Petters, Uta Kühn, and Jürgen Eckert. "Comparison of different post processing technologies for SLM generated 316l steel parts." Rapid Prototyping Journal 19, no. 3 (2013): 173–79. http://dx.doi.org/10.1108/13552541311312166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kugaevskii, Sergey, Eugenius Pizhenkov, and Alexey Gamberg. "The effectiveness of additive SLM-technologies in the manufacture of cutting tools." Materials Today: Proceedings 19 (2019): 1977–81. http://dx.doi.org/10.1016/j.matpr.2019.07.055.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Deng, Cao, Ruidi Li, Tiechui Yuan, Pengda Niu, and Yin Wang. "Microstructure and Mechanical Properties of a Combination Interface between Direct Energy Deposition and Selective Laser Melted Al-Mg-Sc-Zr Alloy." Metals 11, no. 5 (2021): 801. http://dx.doi.org/10.3390/met11050801.

Full text
Abstract:
Selective laser melting (SLM) and direct energy deposition (DED) are two widely used technologies in additive manufacturing (AM). However, there are few studies on the combination of the two technologies, which can synthetically combine the advantages of the two technologies for more flexible material design. This paper systematically studies the Al-Mg-Sc-Zr alloy by combination of SLM and DED with emphasis on its bonding properties, microstructure, and metallurgical defects. It is found that the aluminum alloy prepared by the two methods achieves a good metallurgical combination. The microstr
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "And SLM technologies"

1

Attar, H., M. Bönisch, M. Calin, et al. "Comparative study of microstructures and mechanical properties of in situ Ti–TiB composites produced by selective laser melting, powder metallurgy, and casting technologies." Cambridge University Press, 2014. https://tud.qucosa.de/id/qucosa%3A39023.

Full text
Abstract:
This study presents results of selective laser melting (SLM), powder metallurgy (PM), and casting technologies applied for producing Ti–TiB composites from Ti–TiB₂ powder. Diffraction patterns and microstructural investigations reveal that chemical reaction occurred between Ti and TiB₂ during all the three processes, leading to the formation of Ti–TiB composites. The ultimate compressive strength of SLM-processed and cast samples are 1421 and 1434 MPa, respectively, whereas the ultimate compressive strengths of PM-processed 25%, 29%, and 36% porous samples are 510, 414, and 310 MPa, respective
APA, Harvard, Vancouver, ISO, and other styles
2

Skulina, Daniel. "Zpracování Al-Sc hliníkové slitiny technologií SLM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318760.

Full text
Abstract:
Master's thesis deals with the experimental determination of process parameters reaching densities >99 % for scandium modified aluminium alloy (Scalmalloy®) processed by SLM. The alloy achieves higher mechanical properties than the AlSi10Mg aluminum alloy commonly used. The theoretical part deals mainly with the results of Scalmalloy® alloys. Experimental bodies, testing methodology and evaluation method were designed on the basis of the theoretical parts,. The practical part is divided into four main stages: experimental determination of process parameters, a description of the effect of the
APA, Harvard, Vancouver, ISO, and other styles
3

Malý, Martin. "Experimentální komora pro testování speciálních materiálů technologií SLM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318407.

Full text
Abstract:
The thesis deals with the influence of process temperature and pressure on 3D printing using Selective Laser Melting. The aim of the thesis is the design, manufacture and testing of the experimental chamber for SLM 280HL from company SLM Solutions. The main task of the experimental chamber is to increase the temperature of the preheating of the powder bed from the original 200 °C to at least at 400 °C. The device will be used to investigate the influence of high process temperature on the properties of printed materials. The thesis also deals with the design of the powder applicator for elevat
APA, Harvard, Vancouver, ISO, and other styles
4

Vaverka, Ondřej. "Optimalizace těhlice formule student pro výrobu SLM technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318691.

Full text
Abstract:
This diploma thesis deals with design of axle carrier for Formula Student. The axle carrier is topologically optimized and additively manufactured with Selective Laser Melting technology. Material for its production is aluminium alloy AlSi10Mg, which has worse mechanical properties than commonly used high-strength alloys. Therefore the aim was, by using topology optimization, to design a component, which would have comparable properties with milled component. The stress strain analysis was carried out by the finite element method and maximum deformation and safety coef-ficients were acquired.
APA, Harvard, Vancouver, ISO, and other styles
5

Pliska, Jan. "Vývoj multimateriálového 3D tisku kovových dílů technologií SLM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417566.

Full text
Abstract:
This thesis deals with research and optimization of process parameters and methodology of production of multimaterial parts manufactured by SLM. This work investigates iron-based and copper-based materials. The aim of the work is to create a good-quality horizontal and vertical multimaterial interface. In the case of the horizontal interface, the optimal process parameters for the processing of selected materials, their subsequent optimization for a goodquality horizontal interface and verification of mechanical properties were experimentally determined. For the vertical interface, it was nece
APA, Harvard, Vancouver, ISO, and other styles
6

Kočica, Martin. "Zpracování slitin mědi pomocí technologie selective laser melting." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241911.

Full text
Abstract:
This diploma thesis deals with finding copper alloy suitable for processing SLM technology and determining the process parameters leading to a relative density close to the full material. The theoretical part provides an insight into additive technology and the processing of new alloys in SLM. Work also contains a search report of processed copper alloys used in SLM. Based on the theoretical part were designed test samples and method of evaluation. Samples were produced by melting metallurgical powder using ytterbium laser with an output power 400 W. The testing is divided into three stages; D
APA, Harvard, Vancouver, ISO, and other styles
7

Tomeš, Jan. "Analýza přesnosti výroby lamel formy pneumatiky vyráběných SLM technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241858.

Full text
Abstract:
The first part of the diploma thesis is focused on the analysis and evaluation of the current production of sipes by two SLM devices PXL and M2 Cusing, produced by Phenix Systems and Concept Laser companies. The samples of both machines went through the same manufacturing process and the same process of measurement and evaluation, in order to carry out comparison between individual machines. Geometric accuracy, surface roughness, mechanical properties, and material structure of the samples have been compared. For the sipes it was necessary to create a digital evaluation methodology of geometry
APA, Harvard, Vancouver, ISO, and other styles
8

Skalický, Petr. "Zpracování vysokopevnostní hliníkové slitiny EN AW 7075 technologií SLM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318662.

Full text
Abstract:
This diploma thesis deals with processing of high strength aluminum alloy EN AW 7075 by Selective Laser Melting and verify the influence of process parameters on relative density and mechanical properties. The theoretical part contains an introduction to additive manufacturing of aluminum alloys, the influence of process parameters and description of processes occuring during SLM production. Based on the theoretical part were prepared experiments and method of evaluation. Samples were produced by melting metallurgical powder using ytterbium laser with a maximum output power of 400 W. This dipl
APA, Harvard, Vancouver, ISO, and other styles
9

Klus, Jakub. "Nová koncepce údržby a provozu výrobních technologií." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-449712.

Full text
Abstract:
This diploma thesis deals with a new concept of maintenance and operation of production technologies, where spare parts are manufactured using rapid prototyping methods. The options are compared with currently used methods. Furthermore, methodological recommendations are written on how to proceed with the application. The aim of the work is to evaluate the concept and confirm the theoretical assumptions on a case study.
APA, Harvard, Vancouver, ISO, and other styles
10

Jaroš, Jan. "Vývoj skenovací strategie laseru pro výrobu mikro-prutové struktury technologií SLM." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417510.

Full text
Abstract:
Additive technology (AT) is increasingly used to design unique parts, mainly due to the ability to produce complex structures such as lattice structures. However, this also includes the need to modify the process parameters or the production strategy of the AT, which is usually set to produce volume geometry. Using samples corresponding to the geometries of the lattice structures, the exact input values were measured, which were used to design the SLM (Selective laser melting) production process using a contour strategy. Thanks to this, vertical and angled (35.26°) struts with low porosity (up
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "And SLM technologies"

1

Kovalenko, Vladimir. Design of information systems. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/987869.

Full text
Abstract:
The tutorial discusses the design features of information systems (is) involved in the implementation of CALS technologies: MRP/MRPII/ERP systems, e-Commerce systems (B2B), supply chain management (SCM), customer relationship management (CRM), and decision support systems (OLAP). The issues of choosing the design technology, software tools for project development, building functional and information models in the environment of Business Studio, MS Visio, Elma, AllFusion Modeling Suite and Oracle Designer 10g, as well as the development of technical and operational documentation are highlighted
APA, Harvard, Vancouver, ISO, and other styles
2

Ruehlman, Linda, and Marian Wilson. Enhancing Pain Self-Management via Internet-Based Technology. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780190627898.003.0015.

Full text
Abstract:
This chapter focuses on internet-based pain self-management (IPSM) training for adults with chronic pain. Due to space limitations, it does not address programs directed toward children or adolescents or the burgeoning research on mobile technologies. The chapter discusses various definitions of self-management (SM) and proposes an organizing framework for the concept of SM. It examines barriers to traditional face-to-face pain SM training and the role of Internet-based training as a partial solution to the lack of care options for many. It does not reiterate the numerous excellent reviews of
APA, Harvard, Vancouver, ISO, and other styles
3

Ronen, Boaz, Joseph S. Pliskin, and Shimeon Pass. Principles of Management in the Dynamic Healthcare Environment (DRAFT). Oxford University Press, 2018. http://dx.doi.org/10.1093/med/9780190843458.003.0002.

Full text
Abstract:
Today’s healthcare environment is dynamic with constantly growing demands, high complexity, high degree of uncertainty, fierce competition and is coping with new technologies and facing challenges from demanding patients. To survive in such an environment, managers should view the system globally, focus on the essentials, and use simple tools. This chapter discusses how to avoid suboptimization of systems, as the sum of local optima is not the system optimum. Similarly, this chapter introduces the practical notion of the satisficer’s approach that advocates for “good enough” solutions rather t
APA, Harvard, Vancouver, ISO, and other styles
4

Sugiyama, Masahiro, Atsushi Ishii, Shinichiro Asayama, and Takanobu Kosugi. Solar Geoengineering Governance. Oxford University Press, 2018. http://dx.doi.org/10.1093/acrefore/9780190228620.013.647.

Full text
Abstract:
Climate engineering, a set of techniques proposed to intervene directly in the climate system to reduce risks from climate change, presents many novel governance challenges. Solar radiation management (SRM), particularly the use of stratospheric aerosol injection (SAI), is one of the most discussed proposals. It has been attracting more and more interest, and its pertinence as a potential option for responding to the threats from climate change may be set to increase because of the long-term temperature goal (well below 2°C or 1.5°C) in the 2015 Paris Agreement. Initial research has demonstrat
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "And SLM technologies"

1

Chen, Zhe Bo, Jin Xu, Bin Lin, Xu Xiang Ni, and Zu Kang Lu. "A HDRI Camera Based on SLM." In Optics Design and Precision Manufacturing Technologies. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-458-8.1237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mirring, Patrick, Andreas Rottmann, and Carsten Merklein. "Selective Laser Melting (SLM) of M50NiL—Enabling Increased Degrees of Freedom in New Design Concepts." In Bearing Steel Technologies: 12th Volume, Progress in Bearing Steel Metallurgical Testing and Quality Assurance. ASTM International, 2020. http://dx.doi.org/10.1520/stp162320190071.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Parhi, Pankaj Kumar, Saroj Sekhar Behera, Dindayal Mandal, Debadutta Das, and Ranjan Kumar Mohapatra. "Fundamental Principle and Practices of Solvent Extraction (SX) and Supported Liquid Membrane (SLM) Process for Extraction and Separation of Rare Earth Metal(s)." In Rare-Earth Metal Recovery for Green Technologies. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-38106-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schmid, Manfred. "SLS-Technologie." In Selektives Lasersintern (SLS) mit Kunststoffen. Carl Hanser Verlag GmbH & Co. KG, 2015. http://dx.doi.org/10.3139/9783446445505.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kedare, Ashutosh K., and Kapil Mundada. "Miniaturized Device for SHM Using Electromechanical Impedance Technique." In Inventive Computation Technologies. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-33846-6_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ansari, Fazel, Inka Buethe, Yan Niu, Claus-Peter Fritzen, and Madjid Fathi. "Integration of Knowledge-Based Approach in SHM Systems." In Transactions on Engineering Technologies. Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-017-9115-1_55.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Li. "The role of technology, motivation and SLA." In New Technologies and Language Learning. Macmillan Education UK, 2017. http://dx.doi.org/10.1057/978-1-137-51768-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Luntovskyy, Andriy. "SLMA and Novel Software Technologies for Industry 4.0." In Advances in Soft and Hard Computing. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03314-9_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

O’Donovan, Anthonia, Vijai K. Gupta, Jessica M. Coyne, and Maria G. Tuohy. "Acid Pre-treatment Technologies and SEM Analysis of Treated Grass Biomass in Biofuel Processing." In Biofuel Technologies. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-34519-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Veloso, Bruno, Benedita Malheiro, and Juan C. Burguillo. "Media Brokerage: Agent-Based SLA Negotiation." In New Contributions in Information Systems and Technologies. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-16486-1_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "And SLM technologies"

1

Motta, Gianmario, Linlin You, Nicola Sfondrini, Daniele Sacco, and Tianyi Ma. "Service Level Management (SLM) in Cloud Computing - Third Party SLM Framework." In 2014 IEEE 23rd International Workshops on Enabling Technologies: Infrastructures for Collaborative Enterprise (WETICE). IEEE, 2014. http://dx.doi.org/10.1109/wetice.2014.36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Golyshev, A. A., and A. M. Orishich. "Scaling laws (SLM) for additive technologies of metal-ceramic coatings." In HIGH-ENERGY PROCESSES IN CONDENSED MATTER (HEPCM 2019): Proceedings of the XXVI Conference on High-Energy Processes in Condensed Matter, dedicated to the 150th anniversary of the birth of S.A. Chaplygin. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5117378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wilkinson, T. D. "High tilt angle FLC SLM for optical interconnects." In IEE Seminar on Microdisplay and Smart Pixel Technologies. IEE, 2000. http://dx.doi.org/10.1049/ic:20000023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hussain, Ibrahim M., and Imran A. Tasadduq. "New SUB-SLM Method for PAPR Reduction in OFDM Signals." In 2007 International Conference on Information and Emerging Technologies. IEEE, 2007. http://dx.doi.org/10.1109/iciet.2007.4381314.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kuhn, Jonas G., Polychronis Patapis, Xin Lu, and Marcel Arikan. "SLM-based digital adaptive coronagraphy: current status and capabilities." In Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, edited by Roland Geyl and Ramón Navarro. SPIE, 2018. http://dx.doi.org/10.1117/12.2312554.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mohammady, Somayeh, Nasri Sulaiman, Pooria Varahram, Roslina Mohd Sidek, and Mohd Nizar Hamidon. "Performance investigation between DSI-SLM and DSI-PTS schemes in OFDM signals." In 2012 International Symposium on Telecommunication Technologies (ISTT). IEEE, 2012. http://dx.doi.org/10.1109/istt.2012.6481590.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kangappaden, Alex, Angila Rose Daniel, V. P. Peeyusha, M. Ponmani Raja, P. Sneha, and A. M. Vishnu Das. "Comparision between SLM-companding and precoding-companding techniques in OFDM systems." In 2016 International Conference on Circuit, Power and Computing Technologies (ICCPCT). IEEE, 2016. http://dx.doi.org/10.1109/iccpct.2016.7530214.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kojima, Toshiharu, Yuki Shida, and Tadashi Fujino. "A study of SLM PAPR reduction of OFDM signals without side information." In 2010 International Conference on Advanced Technologies for Communications (ATC 2010). IEEE, 2010. http://dx.doi.org/10.1109/atc.2010.5672743.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Shankar, T., Nithya Ramgopal, R. Mageshvaran, and A. Rajesh. "Hadamard based SLM using genetic algorithm fo PAPR reduction in OFDM systems." In 2017 Innovations in Power and Advanced Computing Technologies (i-PACT). IEEE, 2017. http://dx.doi.org/10.1109/ipact.2017.8245095.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Dong, Junli Qi, Weihua Wang, et al. "Arbitrary polarized beams generated and detected by one phase-only LC-SLM." In 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), edited by Yudong Zhang and Wei Gao. SPIE, 2014. http://dx.doi.org/10.1117/12.2070051.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "And SLM technologies"

1

Ludascher, Bertram, and Ilkay Altintas. Scientific Data Management (SDM) Center for Enabling Technologies. 2007-2012. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1092068.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ludascher, Bertram, and Ilkay Altintas. Scientific Data Management (SDM) Center for Enabling Technologies. Final Report, 2007-2012. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1092067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Morrison, Laura, Anushah Hossain, Myles Elledge, Brian Stoner, and Jeffrey Piascik. User-Centered Guidance for Engineering and Design of Decentralized Sanitation Technologies. RTI Press, 2018. http://dx.doi.org/10.3768/rtipress.2018.rb.0017.1806.

Full text
Abstract:
Technological innovations in sanitation are poised to address the great need for sanitation improvements in low-income countries. Worldwide, more than 2.4 billion people lack access to improved sanitation facilities. Innovative waste treatment and sanitation technologies aim to incorporate user-centered findings into technology engineering and design. Without a focus on users, even the most innovative technology solutions can encounter significant barriers to adoption. Drawing on a household survey conducted in urban slum communities of Ahmedabad, India, this research brief identifies toilet a
APA, Harvard, Vancouver, ISO, and other styles
4

Mayes, Robyn, Bree Hurst, and Amelia Hine. PREDICT: Principles of Good Mining Checklist. Queensland University of Technology, 2021. http://dx.doi.org/10.5204/rep.eprints.212047.

Full text
Abstract:
CONTEXT: Social Licence to Operate (SLO) encompasses the broad socio-political understanding on the part of multiple stakeholders that a mining operation’s social and environmental impacts and measures are legitimate and acceptable. The multiple and variously interacting stakeholder groups— local communities, environmental actors, Indigenous communities, regulators, local governments, industry peak bodies, financiers, affiliated businesses—have the proven capacity to confer and/or disrupt a mining operation’s SLO. The presence or absence of a SLO can have significant consequences not only for
APA, Harvard, Vancouver, ISO, and other styles
5

Beals, D. M., J. P. Bibler, and D. A. Brooks. Extension of Studies with 3M Empore TM and Selentec MAG *SEP SM Technologies for Improved Radionuclide Field Sampling. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/408528.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'And SLM technologies' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography